Related
Links for
1. The Stock V3 is:
https://docs.google.com/uc?id=0B74b7RoIPJyfcVJKSzAtQUM5Q0k&export=download
2. SP Tool for A117 is:
http://d-h.st/tvi
3. USB Driver For A117 is:
http://www.mediafire.com/download/e6c4j3d8j6c5ui3/MTK+Universal+Drivers.rar
to Flash STOCK V3 with SP tool... follow the guide:
1. Download Flash Tool , Stock ROM AND USB Driver From Above LINK
2. Now install SP Tool drvers. see: http://forum.xda-developers.com/canvas-magnus/general/install-usb-drivers-sp-tools-magnus-a117-t2705967
3. NOW Create Folder IN Desktop Give It Name "FLASH"
4. Copy All Downloaded File In Recently Created Folder "FLASH"
5. Extract 'SP_Flash_Tool_v3.1304.0.119.rar' AND Also Extract Stock ROM File
6. NOW Open SP Flash Tools Folder AND Double Click ON "Flashtool.exe"
7. In Flashtool..Click On SCATTER-LOADING(FOUND IN RIGHT-SIDE) AND Select SCATTER File From STOCK ROM'S Folder
8. Flashtool Automatic Select All IMGs AND FILEs
9. NOW Completely Turn Off Your Phone
10. In Flashtool..Click On "DOWNLOAD" Button
11. Install USB Driver AND Connect Your Device To Computer
12. If Everything Is Right Then Process Will Start...Wait Till All Progress Completion
13. After All Process "GREEN CIRCLE" Appear In Center..
14. DISCONNECT PHONE AND POWER ON...THAT'S ALL
[instructions by Krunal32 and Rht555]
thats all.... enjoy
and if it helps.. PRESS THE THANKS BUTTON
checksum
PiyushGupta said:
Links for
1. The Stock V3 is:
https://docs.google.com/uc?id=0B74b7RoIPJyfcVJKSzAtQUM5Q0k&export=download
2. SP Tool for A117 is:
http://d-h.st/tvi
3. USB Driver For A117 is:
http://www.mediafire.com/download/e6c4j3d8j6c5ui3/MTK+Universal+Drivers.rar
to Flash STOCK V3 with SP tool... follow the guide:
1. Download Flash Tool , Stock ROM AND USB Driver From Above LINK
2. Now install SP Tool drvers. see: http://forum.xda-developers.com/canvas-magnus/general/install-usb-drivers-sp-tools-magnus-a117-t2705967
3. NOW Create Folder IN Desktop Give It Name "FLASH"
4. Copy All Downloaded File In Recently Created Folder "FLASH"
5. Extract 'SP_Flash_Tool_v3.1304.0.119.rar' AND Also Extract Stock ROM File
6. NOW Open SP Flash Tools Folder AND Double Click ON "Flashtool.exe"
7. In Flashtool..Click On SCATTER-LOADING(FOUND IN RIGHT-SIDE) AND Select SCATTER File From STOCK ROM'S Folder
8. Flashtool Automatic Select All IMGs AND FILEs
9. NOW Completely Turn Off Your Phone
10. In Flashtool..Click On "DOWNLOAD" Button
11. Install USB Driver AND Connect Your Device To Computer
12. If Everything Is Right Then Process Will Start...Wait Till All Progress Completion
13. After All Process "GREEN CIRCLE" Appear In Center..
14. DISCONNECT PHONE AND POWER ON...THAT'S ALL
[instructions by Krunal32 and Rht555]
thats all.... enjoy
and if it helps.. PRESS THE THANKS BUTTON
Click to expand...
Click to collapse
Hi,
Thanks for sharing. What's the valid checksum of Stock V3 ROM?
Checksum for STOCK V3
Checksum is [ed2c00354eb7a6d0d080453574e91b42]
enjoy.
Checksum for STOCK V3
PiyushGupta said:
Checksum is [ed2c00354eb7a6d0d080453574e91b42]
enjoy.
Click to expand...
Click to collapse
Thanks.
Drivers please help.
Please help me install the drivers.
I'm running Windows 8.1 and my phone is not being recognized.
I've followed all the steps properly but I'm not getting the phone to even show up on the device manager. SP tools refusing to detect. Thoroughly frustrated and wasted 3 days on this.
abhishekmaha said:
Please help me install the drivers.
I'm running Windows 8.1 and my phone is not being recognized.
I've followed all the steps properly but I'm not getting the phone to even show up on the device manager. SP tools refusing to detect. Thoroughly frustrated and wasted 3 days on this.
Click to expand...
Click to collapse
Use only latest sp flash tool.
But I did! Still not recognizing. Nothing's happening, and no yellow bar is coming.. I downloaded the latest version of sptools, tried about 6 different versions of drivers, but my phone is not visible even as an unknown device on the device manager.
abhishekmaha said:
But I did! Still not recognizing. Nothing's happening, and no yellow bar is coming.. I downloaded the latest version of sptools, tried about 6 different versions of drivers, but my phone is not visible even as an unknown device on the device manager.
Click to expand...
Click to collapse
Yo!!
well all the things worked properly for me as well as for another users..
soo @abhishekmaha did you installed the drivers from the given link or from any other source??
i insist you to download and install the drivers from here:
http://forum.xda-developers.com/canvas-magnus/general/install-usb-drivers-sp-tools-magnus-a117-t2705967
Try it and then let me know.
i'll always be happy to help
PiyushGupta said:
Yo!!
well all the things worked properly for me as well as for another users..
soo @abhishekmaha did you installed the drivers from the given link or from any other source??
i insist you to download and install the drivers from here:
http://forum.xda-developers.com/canvas-magnus/general/install-usb-drivers-sp-tools-magnus-a117-t2705967
Try it and then let me know.
i'll always be happy to help
Click to expand...
Click to collapse
ROM File size is 900 MB !1 Is it the right file ?
Download Error
PiyushGupta said:
Checksum is [ed2c00354eb7a6d0d080453574e91b42]
enjoy.
Click to expand...
Click to collapse
I tried to download this several times, but it fails at nearly 800MB. Please help.
@rubenhardy
Yes this is the Right file..
Dont worry it's checked by me and other users too.
@Myanju
No download error cuz of the link..
there may be some problem with you system or network..
you can see the screenshot about the successful download.
Network Error
PiyushGupta said:
@rubenhardy
Yes this is the Right file..
Dont worry it's checked by me and other users too.
@Myanju
No download error cuz of the link..
there may be some problem with you system or network..
you can see the screenshot about the successful download.
Click to expand...
Click to collapse
Hi,
I have attached screen shot of what i faced. please look into this and let me know what actions i should take.
Use IDM or some other downloder
Hi..
what are the features of stock v3.
does it mean kernal version
pls help
---------- Post added at 06:46 AM ---------- Previous post was at 06:39 AM ----------
what are its features....
Emergency calls only problem
HI there , firstly there was problem for invalid IMEI, i got it resolved by flashing sec_ro file again. but now its showing emergency calls only. my phone is able to detect SIM card but showing emergency calls only.
is there any modem patch that can help.
pls help.:crying:
Disclaimer: Flash at your own risk, I added tutorial so if something gone wrong to your phone, don't blame me.
Click to expand...
Click to collapse
New QMobile i9 Users
Click to expand...
Click to collapse
Click Here First
IMEI / NVRAM Backup
Click to expand...
Click to collapse
Method 1:
Before Installing the KitKat Follow These Steps.
1. Download MTK Droid Tool From Here
2. i9 must be rooted and USB debugging must be enabled before you proceed.
3. Attach the cell phone with data cable and run mtk droid tool as admin.
4. When device got loaded press the root button and grant root access on cell phone.
5. Click on IMEI/NVRAM button and click on backup.
6. Now in case after flashing u lost IMEI follow the same steps but now click on restore.
Method 2 (In Case No IMEI Backup):
1.Be patient and it will fix your imei
2.Download the IMEI_WINDOWS.zip from here
3.Extract the contents to C:\Users\Username (Current User)
4.Open command promp and cd to the IMEI_WINDOWS folder
5.Now type "imei.exe 123456789111111 123456789111111" without quotes
6.Just replace both the 15 digit numbers with your IMEI 1 and IMEI 2 respectively
7.Now a file named "MP0B_001_NEW" will be generated in your IMEI_WINDOWS folder
8.Just rename it to "MP0B_001"
9.Now download the IMEI_FLASHABE.zip from here
10.Extract this zip and go to "/data/nvram/md/NVRAM/NVD_IMEI/"
11.Delete the placehere file and paste your "MP0B_001" file here
12.Now zip the META-INF and data folder and flash it with recovery
13.You have to flash this after you see imei error on your 1st boot
14.Don't flash directly after the ROM, just do your first boot then flash it.
Method 3 (In Case No IMEI Backup):
1.Download IMEI Repair Tool
2.Download Support Files
3.Instructions To Follow
QMobile KitKat Release
Click to expand...
Click to collapse
Before you update Back Up your current rom using custom recovery in case you want to revert back
Try t0 use stable window 7 and a laptop with full battery.
Video Tutorial (Not in English just watch the video and follow)
Smart Phone Flash Tool and Driver
Firmware Download
1. First of all download the required files.
2. Install Tinno Driver.
3. Extract All Zips.
4. Run the Flashing Tool as admin (Right Click on the file and click on run as admin)
5. Download Scatter File From Attachments And Add It In Firmware Folder Now Load It, all files will be loaded now click on the address bar in front of recovery and select the recovery attached below.
6. Select Firmware Upgrade.
7. Power off the cell phone and remove battery.
8. Now click on download and attach the cell phone without battery to data cable.
9. Wait till flash. You are done. :laugh:
10. Enjoy Official Noir i9 KitKat.
Rooting Method
Click to expand...
Click to collapse
1. Just Install The Attached Zip named "4.4 Root.zip" or "subbinst-signed.zip" Via Recovery.
MyPhone KitKat Release
Click to expand...
Click to collapse
Before you update Back Up your current rom using custom recovery in case you want to revert back
Try t0 use stable window 7 and a laptop with full battery.
Trust yourself you can do it!. :laugh:
Video Tutorial (Not in English just watch the video and follow)
Smart Phone Flash Tool and Driver
Firmware Download
1. First of all download the required files.
2. Install Tinno Driver.
3. Extract All Zips.
4. Run the Flashing Tool as admin (Right Click on the file and click on run as admin)
5. Select Scatter Loader from the firmware, all files will be loaded now click on the address bar in front of recovery and select the recovery attached below.
6. Select Firmware Upgrade.
7. Power off the cell phone and remove battery.
8. Now click on download and attach the cell phone without battery to data cable.
9. Wait till flash. You are done. :laugh:
10. Enjoy KitKat.
Rooting Method
Click to expand...
Click to collapse
1. Just Install The Attached Zip named "4.4 Root.zip" Via Recovery.
MMX KitKat Release
Click to expand...
Click to collapse
Video Tutorial
1. Official KitKat Download
2. Smart Phone Flash Tool and Tinno Driver Download
3. Download the recovery file attached below.
4. Install Tinno Driver.
5. Extract All Zips.
6. Run the Flashing Tool as admin (Right Click on the file and click on run as admin)
7. Select Scatter Loader from the firmware, all files will be loaded now click on the address bar in front of recovery and select the recovery attached below.
8. Select Firmware Upgrade.
9. Power off the cell phone and remove battery.
10. Now click on download and attach the cell phone without battery to data cable.
11. Wait till flash. You are done.
12. Enjoy Offical KitKat.
Rooting Method
Click to expand...
Click to collapse
1. Just Install The Attached Zip named "subbinst-signed.zip" Via Recovery.
Custom ROM "Classic Kat" by Me
Click to expand...
Click to collapse
Click Here
Custom Rom Based On MMX
Click to expand...
Click to collapse
Custom Rom v3
1.Place ROM Zip File in your sdcard
2.Wipe data/factory reset
3.Wipe dalvik cache
4.Flash ROM from sdcard
5.Flash subbinst-signed.zip from attachment to get root access.
6.Enjoy a Proper and Stable KitKat
7.Download and Flash FILE_MANAGER.zip to remove error in the File Manager. :good:
8.If no engineering mode in your cell phone then download engineermode.apk and copy/paste in system app via Root Explorer
Increase App Storage
Click to expand...
Click to collapse
Use it only on MMX KitKat Release and on Custom ROM based on MMX. Not with MyPhone KitKat Release.
Step 1: Download "Internal APP storage (4GB MMXKK).zip" from bellow
Step 2: Extract the file
Step 3: Open SP Flash tools
Step 4: Add scatter file
Step 5:Select EBR1 and EBR2
Step 6: Click on Download
Step 7:Remove the battery from your Canvas 2 colors
Step 8:Connect your phone to pc via data cable
Step 9:wait for the completion of Flashing Process
Step 10:Reboot your Phone
Step 11ull down Notification panel and tap on the msg "Damaged Internal SD card"
Step 12: Tap on Format ...
Now Enjoy 2.1 GB app storage with 410MB Mass storage....
Revert Back To JellyBean i9 Official
Click to expand...
Click to collapse
Video Tutorial (Not in English just watch the video and follow)
Smart Phone Flash Tool and Driver
Firmware Download
1. First of all download the required files.
2. Install Tinno Driver.
3. Extract All Zips. 1 file is missing in the firmware zip which is attached below named secro.img, add it in the firmware folder before proceed.
4. Run the Flashing Tool as admin (Right Click on the file and click on run as admin)
5. Select Scatter Loader from the firmware, wait till all files to load.
6. Select Firmware Upgrade.
7. Power off the cell phone and remove battery.
8. Now click on download and attach the cell phone without battery to data cable.
9. Wait till flash. You are done. :laugh:
10. Enjoy Stock JellyBean.
Add-ons
Click to expand...
Click to collapse
Click Here
Plese Hit thanks button if I helped you!
Click to expand...
Click to collapse
Frequently Asked Question (FAQ)
Click to expand...
Click to collapse
1. After I upgrade into kitkat firmware, can I downgrade again to Jellybean?
-Just flash dump rom of jellybean using spft.
2. I back up in CWM, Can I restore this in Kitkat version?
-No!
3.May I ask if we have custom recovery available for our kitkat version?
-Yes CTR
Credits
INCPAK
Biswajyoti
CallMeX!!
umangleekha
More Custom KitKat ROMs
You Must Be On KitKat To Flash These ROMs
Click to expand...
Click to collapse
ROM Links JellyBean 4.2
Click to expand...
Click to collapse
1. Huawei Honor 3C
2. Galaxy s5
ROM Links KitKat 4.4
Click to expand...
Click to collapse
1. KitKat Fresh v3 (4.4.2)
2. KitKat Emotion UI (4.4.2)
3. SlimKat Themed KitKat (4.4.4)
4. AOSP KitKat ROW (4.4.2)
5. Lenovo KitKat (4.4.2)
6. Android L Themed ROM
Procedure of Installation
Click to expand...
Click to collapse
1.Place Any ROM Zip File in your sdcard.
2.Wipe data/factory reset.
3.Wipe dalvik cache.
4.Flash ROM from sdcard.
5.Flash 4.4 Root.zip from attachment to get root access.
6.Enjoy.
Add-ons
Click to expand...
Click to collapse
Click Here
Note: Replace the boot.img in Fresh v3 to use Memory Card as default.
Click to expand...
Click to collapse
Credits
4pda.ru
Have you tried using titanium backup, go backup or lucky patcher after root genius because when i earlier flashed kitkat these apps weren't working and i had to revert back to jelly bean.
Edit: Thanks brother, all these apps are working after root genius. You've solved a big problem for me.
Add-ons
Add-ons
Click to expand...
Click to collapse
1.Best Keyboard In Town.
2a.Best Music Player In Town
2b.Music Player Add-on Patch
3.Best Camera App In Town
4.QMobile Stock Logo i9
5.Battery & Performance Patch
Procedure
Click to expand...
Click to collapse
1.Place Zip File in your SDCard.
2.Reboot Into Recovery.
3.Flash zip from sdcard.
4.Enjoy.
root genius failed.....when I flash CWM recovery it says PMT changed for rom
I alreay told in the post that flash the recovery with the ROM by replacing the included recovery
sorry my bad...tnks 4 reply
Always welcome
If you want to ask any question please ask on this forum only. Thanks
New i9 users must check this link
http://forum.xda-developers.com/showthread.php?t=2836748
Screen shots
qwerfaseeh said:
Before Installing the Official KitKat Follow These Steps.
1. Download MTK Droid Tool From Here
2. i9 must be rooted and USB debugging must be enabled before you proceed.
3. Attach the cell phone with data cable and run mtk droid tool as admin.
4. When device got loaded press the root button and grant root access on cell phone.
5. Click on IMEI/NVRAM button and click on backup.
6. Now in case after flashing u lost IMEI follow the same steps but now click on restore.
7. IMEI backup is a must thing.
8. Enjoy Official Release.
[/B]
Video Tutorial
1. Official KitKat Download
2. Smart Phone Flash Tool and Tinno Driver Download
3. Download the recovery file attached below.
4. Install Tinno Driver.
5. Extract All Zips.
6. Run the Flashing Tool as admin (Right Click on the file and click on run as admin)
7. Select Scatter Loader from the firmware, all files will be loaded now click on the address bar in front of recovery and select the recovery attached below.
8. Select Firmware Upgrade.
9. Power off the cell phone and remove battery.
10. Now click on download and attach the cell phone without battery to data cable.
11. Wait till flash. You are done.
12. Enjoy Offical KitKat.
1. Just Install PDA.Net+ Driver
2. Use the Genuine Root method.
3. No need to install the root.zip first
4. Just attach cell phone and run genuine root and click on Root button.
Click to expand...
Click to collapse
provide screen shots of whole phone
Root method has been updated, and a new custom ROM named CleanKat is added in the thread, check the first and 2nd post for the easiest and most proper working root.
Mustafa Chaudhry said:
provide screen shots of whole phone
Click to expand...
Click to collapse
added now check the 2nd post
qwerfaseeh said:
added now check the 2nd post
Click to expand...
Click to collapse
I flashed the attached file but root checker says not proper root what to do?
Is there any superuser app in the app drawer?
If yes then it is rooted dont worry u can confirm it with the lucky patcher and titanium backup
qwerfaseeh said:
If yes then it is rooted dont worry u can confirm it with the lucky patcher and titanium backup
Click to expand...
Click to collapse
Yes, there is and I reflashed the zip file again and its resolved and root checker is happy with it
So r u happy with this easy and proper root?
Also comment about the easiest IMEI backup method
if any one want to increase App storage which is almost 700 MB see first post
Use it only on Official KitKat and 2nd Custom ROM. Not with 1st custom ROM or with Official Leak on 1st Post.
1.Download lollipop firmware
2.Download gapps
3.Download dual sim patch from and copy all zip file to your sd card
4.Now root your device,it can be easily done without pc using app called towelroot and click on make it rain!
5.After rooting unlock your bootloader
6.When you will successfully unlock the bootloader you may brick your phone but dont worry
7.From the above lollipop firmware extract the file named boot,img
8.To flash that file you need to download software known as flashtool 0.9.15.0
9,Install appliction and connect your device in fastboot mode,To connect your phone in fastboot mode hold the volume up button and connect your phone to your pc on the screen it will inform that device connected in fastboot mode
10.Now click on the flash icon located on top left and click on fastboot mode`and click ok
11.Now click on select system to flash and then a window will popup to select file now see on the bottom it will be selected *.sin change it into *.img
12.Now locate your boot.img file that you extracted on step 7
13.Now click ok it will be flashed
14.Now poweron your phone and long press the volume up key and you will see that notification light first turn orange and then green and you will come on recovery mode now select wipe and clear all data,system cache,dalvic cache and now come back to main menu and click on install and select micro sd and flash all the zip file we downloaded before
15.After flashing click on reboot
16.Now to make your both sim work use root explorer and goto system/build.prop and Remove these following ones :
CODE:
ro.ril.telephony.mqanelements=4
persist.radio.oem_socket=false
And write
CODE :
persist.radio.multisim.config=dsds
persist.radio.dont_use_dsd=true
17.For any problem please comment!
Enjoy!
Hi,
here isn't the right place for this kind of thread. Please see this forum for Xperia M
Sony Xperia M
Thanks for understanding
Thread closed
ROOT V20J H901
LOAD UP ON FILE WITH LG UP TOT
FILE HAS FULL ROOT + TWRP
LINK: https://drive.google.com/file/d/0B3R77elw9JjNQkpaUWkwNGstU1U/view
Flash files extract via LG UP tot
1: Flash files extract via LG UP choose upgrade then choose file tot.
2: Flash finished command "adb reboot recovery" or using the hard keys, power off, press the volume keys simultaneously 2 + source reduction, to release the logo and press the power key hands always, reduce the volume keys remain, keeping 2 keys, until into TWRP
3: When connected to a computer to copy TWRP SuperSU zip copied to the computer to download
4: Flash SuperSU
5: Reboot
Donate Paypal: [email protected]
You sir are my hero!! Donation coming in the next few days!!?
Slightly different way than we performed last night, but looks much more precise
Great work!
Sent from my A0001 using XDA-Developers mobile app
what exactly is "downloadmod"
tnpapadakos said:
what exactly is "downloadmod"
Click to expand...
Click to collapse
I believe he means "Download Mode"
Power Off
Hold Volume Up
Plug In USB
(i think)
tnpapadakos said:
what exactly is "downloadmod"
Click to expand...
Click to collapse
volume up on your phone as you plug in your usb
warp64 said:
volume up on your phone as you plug in your usb
Click to expand...
Click to collapse
so, in the stock recovery I guess...
what if I have stock LP, but rooted, and with TWRP recovery?
tnpapadakos said:
so, in the stock recovery I guess...
what if I have stock LP, but rooted, and with TWRP recovery?
Click to expand...
Click to collapse
Update TWRP to 3.0.2
Then you can use Eliminater74 Rom
Flash Part 1 Dont Reboot
Flash A Part 2 Dont Reboot
Flash SuperSU
Note**If Elimnater74s Rom does happen to delete your recovery.img then you can still flash TWRP by using FlashFire by ChainFire**
Also once you upgrade to MM even if its a ROM you CANNOT revert back to LP.
tnpapadakos said:
so, in the stock recovery I guess...
what if I have stock LP, but rooted, and with TWRP recovery?
Click to expand...
Click to collapse
Then you need to go to the Developer Section and see Eliminater74 because i think he's the only one with a rooted MM
[ROM] [STOCK] V10_H901_V20E_Stock2,430 posts
Thanks: 8,189
Double0EK said:
Update TWRP to 3.0.2
Then you can use Eliminater74 Rom
Flash Part 1 Dont Reboot
Flash A Part 2 Dont Reboot
Flash SuperSU
Note**If Elimnater74s Rom does happen to delete your recovery.img then you can still flash TWRP by using FlashFire by ChainFire**
Also once you upgrade to MM even if its a ROM you CANNOT revert back to LP.
Click to expand...
Click to collapse
OK thanks :good:
tungkick said:
Download rom kdz: https://docs.google.com/uc?id=0B3R77elw9JjNSmVsVjhjbWdLcEU&export=download
Download Tot add twrp: https://docs.google.com/uc?id=0B8mSVItI_cqRc0NPVlEtZmxqb2s&export=download
LG UP Download:MEGA, GOOGLEDRIVE
Step by step flash:
1. Download all file.
2. Install the LG Drivers.
3. Extract the RAR File to get the .TOT file.
4. Unzip "lgupnew.zip"
5. Run LGUP_Store_Frame_Ver_1_14_3.msi
6. LGUP_8994_DLL_Ver_0_0_1_18.msi
7. Copy the "common" folder to "C:\Program Files (x86)\LG Electronics\LGUP\model"
8. Plug phone into Downloadmod.
9. Run "LGUP" from your start menu.
10. Select your Phone if see option.
11. Choose bin file choosekdz v20e H901then chooseREFUBISH
12. Go to setting > develop > enabable usb debugging + oem unlock check.
13. Put downloadmod again, open lgup choose UPGRADE > choose file TOT LGH901AT-00-V20e-TMO-US-MAR-16-2016-ARB01+0.tot >Start.
14. Put phone to twrp download Supper SU (https://drive.google.com/file/d/0B8mSVItI_cqRNTlFeVJFNC1aejA/view?usp=sharing) Copy to phone memory then flash it> Done phone have root.
Donate : Click
Thank you @ Eliminater74
Click to expand...
Click to collapse
Where in these instructions do we flash the MM version of twrp? Or, is it already part of the tot file?
sanjsrik said:
Where in these instructions do we flash the MM version of twrp? Or, is it already part of the tot file?
Click to expand...
Click to collapse
It is part of the tot, directions look good, follow completely and you can have stock-rooted MM
Sent from my A0001 using XDA-Developers mobile app
demkantor said:
It is part of the tot, directions look good, follow completely and you can have stock-rooted MM
Click to expand...
Click to collapse
All I was looking for, thanks, will try this this weekend.
OP, just a suggestion, you may want to indicate that twrp is part of the tot file. It wasn't clear there.
This method certainly looks cleaner than the other method discussed last night. Looks like pure stock rooted which is exactly what I want. I passed out last night after i finished backing up everything which is a good thing now! I don't see anything about unlocking the bootloader in his instructions which is interesting. Basically it's flash the kdz, flash the tot, reboot recovery and flash superSu and you're golden. You would assume that this is necessary but has anyone tried this yet and not had to do that? It would actually be a bonus to not have to do that and avoid the corruption splash screen.
tungkick said:
Download rom kdz: https://docs.google.com/uc?id=0B3R77elw9JjNSmVsVjhjbWdLcEU&export=download
Download Tot add twrp: https://docs.google.com/uc?id=0B8mSVItI_cqRc0NPVlEtZmxqb2s&export=download
LG UP Download:MEGA, GOOGLEDRIVE
Step by step flash:
1. Download all file.
2. Install the LG Drivers.
3. Extract the RAR File to get the .TOT file.
4. Unzip "lgupnew.zip"
5. Run LGUP_Store_Frame_Ver_1_14_3.msi
6. LGUP_8994_DLL_Ver_0_0_1_18.msi
7. Copy the "common" folder to "C:\Program Files (x86)\LG Electronics\LGUP\model"
8. Plug phone into Downloadmod.
9. Run "LGUP" from your start menu.
10. Select your Phone if see option.
11. Choose bin file choose kdz v20e H901 then choose REFUBISH
12. Go to setting > develop > enabable usb debugging + oem unlock check.
13. Put downloadmod again, open lgup choose UPGRADE > choose file TOT LGH901AT-00-V20e-TMO-US-MAR-16-2016-ARB01+0.tot >Start.
14. Put phone to twrp download Supper SU (https://drive.google.com/file/d/0B8mSVItI_cqRNTlFeVJFNC1aejA/view?usp=sharing) Copy to phone memory then flash it> Done phone have root.
Donate : Click
Thank you @ Eliminater74
Click to expand...
Click to collapse
You will have a donation from me later in the week
tungkick said:
Download rom kdz: https://docs.google.com/uc?id=0B3R77elw9JjNSmVsVjhjbWdLcEU&export=download
Download Tot add twrp: https://docs.google.com/uc?id=0B8mSVItI_cqRc0NPVlEtZmxqb2s&export=download
LG UP Download:MEGA, GOOGLEDRIVE
Step by step flash:
1. Download all file.
2. Install the LG Drivers.
3. Extract the RAR File to get the .TOT file.
4. Unzip "lgupnew.zip"
5. Run LGUP_Store_Frame_Ver_1_14_3.msi
6. LGUP_8994_DLL_Ver_0_0_1_18.msi
7. Copy the "common" folder to "C:\Program Files (x86)\LG Electronics\LGUP\model"
8. Plug phone into Downloadmod.
9. Run "LGUP" from your start menu.
10. Select your Phone if see option.
11. Choose bin file choose kdz v20e H901 then choose REFUBISH
12. Go to setting > develop > enabable usb debugging + oem unlock check.
13. Put downloadmod again, open lgup choose UPGRADE > choose file TOT LGH901AT-00-V20e-TMO-US-MAR-16-2016-ARB01+0.tot >Start.
14. Put phone to twrp download Supper SU (https://drive.google.com/file/d/0B8mSVItI_cqRNTlFeVJFNC1aejA/view?usp=sharing) Copy to phone memory then flash it> Done phone have root.
Donate : Click
Thank you @ Eliminater74
Click to expand...
Click to collapse
If we are already on stock MM do we need to install the KDZ first? Or is that just to get you to MM?
Great write up by the way, even with a language barrier you made this simple and easy to understand!
[emoji106]
Sent from my LG-H901 using Tapatalk
Sorry for interrupting, i am H961N's user.
I am curious will this method also works on H961N and other models? Does this method need unlocked bootloader?
Cause' i am very desirous to have root on MM.
Thank you.
Everything seems fine until I get to this point:
13. Put downloadmod again, open lgup choose UPGRADE > choose file TOT LGH901AT-00-V20e-TMO-US-MAR-16-2016-ARB01+0.tot >Start.
Click to expand...
Click to collapse
after that I just get boot loops, red text boot verification failed.
I enabled OEM unlock in settings, so I don't know what the issue is. I also tried redownloading the files.
Nevermind, had to get into fastboot via Vol down + plug in USB then unlock the bootloader via adb command
ReelFiles said:
Everything seems fine until I get to this point:
after that I just get boot loops, red text boot verification failed.
I enabled OEM unlock in settings, so I don't know what the issue is. I also tried redownloading the files.
Click to expand...
Click to collapse
are you already on Marshmallow or are you doing this from Lollipop 5.1.1?
ReelFiles said:
Everything seems fine until I get to this point:
after that I just get boot loops, red text boot verification failed.
I enabled OEM unlock in settings, so I don't know what the issue is. I also tried redownloading the files.
Click to expand...
Click to collapse
is your bootloader unlocked? that was my problem. had to unlock it to get the phone to boot, then i got into TWRP and flashed su. i got it all done with the help of member warp64
Looking for a perfect tutorial to root honor 6 H60-L04 followed so many things which i got from internet but nothing worked and some of them were too complicated.
you should follow the standadrd methods.. search in the forum here and youl find one,
id recomend standard method,
first unlock
flash twrp
install supersu
profit
its easy !,,
First Follow this Thread Or Use This Tool
Second Download TWRP and extract if was in zip file and rename it to Recovery.img
Third ( Follow This Thread )
Move Recovery.img To ADB Folder Which Created after Third Step.
Right Click inside the folder While holding Shift Button .
Click Run CMD
Type
Code:
ADB DEVICES
u shout see ur device Serial No.
Then Type
Code:
Fastboot Flash Recovery Recovery.img
Code:
Fastboot Reboot
now U should be having Touch Recovery TWRP
Download This Superuser File
Go Recovery Throw Power and Volume Up method (ur honor should be off ) then use 2 buttons method.
hit install
chose SD card
Chose Superuser.zip
Flash .
u r done !.
Use honor multitool: http://forum.xda-developers.com/honor-6/general/honor6-multi-tool-t2963060
Sent from my H60-L04 using XDA-Developers mobile app