{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
* Your warranty is now void.
* This requires an unlocked bootloader and I used TWRP 3.0.0.0 to flash
* I am not responsible for bricked devices, dead SD cards, thermonuclear war, etc...
Instructions
If installing fresh and/or coming from another ROM
1) Reboot into Recovery (Please use the latest TWRP) and MAKE A BACKUP!
2) Wipe System, Data, Cache, and Dalvik Cache
3) Flash Latest OFFICIAL STOCK ROM - This will ensure a clean system and all bootloader etc updated to latest. (Good idea)
4) Wipe System, Data, Cache, and Dalvik Cache
5) Flash the ROM
6) Flash GApps (i used Opengapps nano)
Download Link
https://www.androidfilehost.com/?w=files&flid=125986
Extras included in this rom are: Smartbar, Network traffic speed indicator and CMTE.
I got an FC on AudioFX but ended up installing busybox and subsequently V4A and I don't have any more FC
Please leave feedback. I will post my findings too. :good:
Whats broken so far...
Camera: Its getting there....
DT2W: I will try and add this in the next build
Radio for castor isnt working
If the ROM for the Castor-LTE is ready and downloadable I will test it 5 minutes later
here you go!
https://www.androidfilehost.com/?w=files&flid=126152
Downloading.... and making a backup now
Problem:
Flashed TWRP 3.0.0 with fastboot and then TWRP doesn't start
Flashed back to TWRP 2.8x. Flashing the CM13 ZIP results in an immediately rebooting TWRP after 2 seconds.
Then flashed the kernel from the CM13 Zipfile and tried the CM Recovery==> checksum error for the flashable CM13 ZIP.
What do I wrong?
---------- Post added at 06:13 PM ---------- Previous post was at 05:45 PM ----------
all reloaded and made again form start! Now it's flashing and booting CM13
More about the test install later.....
Flashed original Firmware and wiped all for 2 times and then flashed ROM + Gapps:
CM13 is booting but not recognize SIM-Card neither WLAN
It claims "No SIM-card" and enabling WLAN cycles endless.....
firefox-58 said:
Flashed original Firmware and wiped all for 2 times and then flashed ROM + Gapps:
CM13 is booting but not recognize SIM-Card neither WLAN
It claims "No SIM-card" and enabling WLAN cycles endless.....
Click to expand...
Click to collapse
Thanks for testing. I'll have to look into that. I personally have castor_windy and my wlan is working.
Sent from my Xperia Z2 Tablet Wifi using XDA-Developers mobile app
Perhaps missing Blob's ??
Gesendet von meinem Xperia Z2 Tablet LTE mit Tapatalk
Hello, this ROM is stable or in beta version? Bugs? Thanks!
Its been stable for me but my tablet is wifi only model
pickandrew said:
Hello, this ROM is stable or in beta version? Bugs? Thanks!
Click to expand...
Click to collapse
pickandrew said:
Hello, this ROM is stable or in beta version? Bugs? Thanks!
Click to expand...
Click to collapse
stable for daily use (I use WiFi version), much better than original SONY MM ROM in terms of lags, battery friendly
bugs: mostly not working camera (not important to me), missing DT2W, crashing AudioFX (unless disabled)
today I'm going to test charging, have last 6% in battery
thanks to @bacon612 for this ROM, excellent work, hope you will implement DT2W soon
Edit: switched to AOSP 7.1 for now, had 3 random reboots in cca 5 days, so going to test stability in N
Does the kernel/ROM support quick charge as well as the latest stock?
On Android Host are two new builds with new dates.
Are this automatic builds or do they contain any new fixes?
Especially my castor has no Wlan and no LTE with the first build? I think there are some blobs missing.
But no comment from the author up to now
firefox-58 said:
On Android Host are two new builds with new dates.
Are this automatic builds or do they contain any new fixes?
Especially my castor has no Wlan and no LTE with the first build? I think there are some blobs missing.
But no comment from the author up to now
Click to expand...
Click to collapse
Hi there. I just did a repo sync and built to include whatever Cyanogenmod has merged until 11/11 including November security patch. You can try the castor build to see if it works but I haven't changed anything. If you let me know that it didn't work for you I'll try to get it to work.
Sent from my HTC One M9 using XDA-Developers mobile app
OK I will try it.
But all the behaviour of the not-activating-wlan is like some weeks before with the AOSP build. You can enable the WLAN and wait forever...... Or it claims the SIM-card as "not present"
In AOSP it was clearly solved after they added the appropriate binaries. After this all was running as expected. WLAN and LTE
Can you have a look on this?
I think the CM releases are only for devices without LTE and contain nothing (BLOBS) for activating LTE
http://forum.xda-developers.com/showpost.php?p=68138341&postcount=10
Tested (flashed)
No WLAN and no LTE
1. SIM card not detected
2. Activation WLAN runs forever
WLAN claims MAC Address: 02:00:00:00:00:00
Neverever can this be true!
I did test that on an SGP511. The 20161111 is not rly useable as I cound't access/see any item in the status bar. Also notifications wouldn't pop up.
20161031 works almost fine but the auto-brightness sometimes seems to be off. As some already wrote: AudioFX crashes always when any app tries to use it. And charging is quite slow either i do use an Anker Quick Charge capable so it loads faster on Stock Rom.
Edit: I also happend to come across 5 times where the tablet would reboot during intense play/testing (using 2 diff. speed clickers).
Generally: How can i disable Cm Recovery? There is no option to disable "update cyanogen recovery" in dev options, so i can't get twrp running (except i do flash the multirom img). Btw. will there be any update of the rom?
The development of this ROM is IMO dead.
Since a long time nor further builds and no solution for not running LTE
Ah well, the dev. seems to not regulary check in. And after Nougat+Lineage it wouldn't be of surprise the development gets stucked. So that's why i am waiting on an (un-)official answer.
Related
[ROM][OFFICIAL][5.1.X] AOSPA-L for amami | #StayParanoid
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is an official build of PA 5.+ for the XPERIA Z1 Compact (aka amami)!
Code:
Your warranty is now void.
I am not responsible for bricked devices,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
A lot.
Installation instructions:
Unlock bootloader necessary for installation
- Wipe Data / Factory reset
- Flash PA Zip
- Flash SU
- Flash GApps
- Reboot
Manual update instructions:
- Flash PA Zip
- Flash SU
- Flash GApps
- Wipe Cache/Dalvik
- Reboot
Download:
AOSPA-L 5.1.X
SU Zip
GApps : http://fitsnugly.euroskank.com/?rom=banks&device=gapps
https://github.com/cgapps/vendor_google/releases/tag/2015-05-03_arm64
Changelogs:
- Merge of android-5.1.1_r2 tag from AOSP
- Theme Engine support from CM-12.1 - Screenshot fixes (NPE and leaks)
- Cellular Networks migration (accessible through main settings now)
- MultiSIM support
- Mute notification sounds threshold
- ParanoidOTA revamp with Material update
- Status Bar’s Double Tap to Sleep
- Misc Bug Fixes
Important Links:
Gerrit: gerrit.aospal.com
Google+ : https://plus.google.com/communities/103106032137232805260
Github: https://github.com/AOSPA-L
Credits
AOSPA-L Team
CM
XDA:DevDB Information
AOSPA-L, ROM for the Sony Xperia Z1 Compact
Contributors
Saatvik Shukla
ROM OS Version: 5.1.x Lollipop
Version Information
Status: Alpha
Created 2015-05-29
Last Updated 2015-05-29
Reserved
Reserved
I have a problem
Skraer said:
I have a problem
Click to expand...
Click to collapse
The picture (twrp log) says it all. Z1c isn't a Z3c. So u either have a Z3c (doubt it with that led) or you have a wrong recovery/ tempered with the recovery to look like it is a Z3c. Or even the zip is wrong. So check your device, zip and/or recovery.
Is there a list of known issues? Or same as cm12.1?
hello
finally we get an official lollipop pa version. i have been waiting so long.
attached is a screenshot of my fn buttons menu, it is blank.
i cant seem to find the menu to edit my notification tiles.
best regards and thank you
krakkhor said:
hello
finally we get an official lollipop pa version. i have been waiting so long.
attached is a screenshot of my fn buttons menu, it is blank.
i cant seem to find the menu to edit my notification tiles.
best regards and thank you
View attachment 3342258
Click to expand...
Click to collapse
For the buttons menu, I'm currently traveling, I'll try to fix it this week, else it'll be fixed in the coming week for sure.
For the tiles, PA will merge that back soon.
Br
S
thank you for the reply, i am looking forward to your work, but first enjoy your travels
krakkhor said:
thank you for the reply, i am looking forward to your work, but first enjoy your travels
Click to expand...
Click to collapse
In the meantime, if you're interested, you can change navbar dimensions with xposed module 'dimensions editor'. Can't move or add buttons though.
Unfortunately, Setup Wizard has stopped
Hi,
Thanks for the lollipop PA update! I have a problem however. I wiped my data, flashed PA zip, flashed SU zip, flashed gapps, then wiped cache/dalvik and then rebooted. Now I get the "Unfortunately, Setup Wizard has stopped" error and can't reboot into recovery. Any ideas?
Thanks in advance
zajirobo said:
Hi,
Thanks for the lollipop PA update! I have a problem however. I wiped my data, flashed PA zip, flashed SU zip, flashed gapps, then wiped cache/dalvik and rebooted. Now I get the "Unfortunately, Setup Wizard has stopped" error and can't reboot into recovery. Any ideas?
Thanks in advance
Click to expand...
Click to collapse
Turns out I lost recovery after flashing this, had to go into fastboot and reflash CWM recovery. When I was first flashing the ROM CWM did say I may have lost root and asked if I wanted to fix. I declined as I remembered reading somewhere not to do this...any ideas why I lost recovery after flashing this?
What I could see in the settings menu looked great! Can't wait for this to be stable so I can flash!
The latest build of AOAPA-L on aospal.com of 06122015, is not booting on my z ultra.
Please do Not flash it, till the issue is squashed out.
Also please do confirm if it boots on amami or not.
Br
S
It only Booted into recovery
Gesendet von meinem Xperia Z1 Compact mit Tapatalk
I try to upgrade from PA 4.6, but no luck - tried several times, every time i get bootloop, and only can run in fastboot or flashmode, cant get to recovery or normal boot. Tried latest build from 19-06-2015
Is there anyone who could explain how to install this rom?
I come from PA 4.6
Did everything as described, but phone bootloops after instalation.
Yes, i wiped everything.
I installed everything in decribed order
bootloop.
Its been quite a while.
Here is a build i did yesterday.
https://www.androidfilehost.com/?w=files&flid=33199
Hello, just wanted to ask if the wifi/bt mac bugs are in this rom. I mean the ones where BT mac changes everytime when BT is turned on/off and wifi mac is a false one. Thanks.
Syssx said:
Hello, just wanted to ask if the wifi/bt mac bugs are in this rom. I mean the ones where BT mac changes everytime when BT is turned on/off and wifi mac is a false one. Thanks.
Click to expand...
Click to collapse
It has not been reported.
Saatvik Shukla said:
It has not been reported.
Click to expand...
Click to collapse
It's known bug which is in Cyanogenmod and all roms based on their device sources - http://forum.cyanogenmod.org/topic/111587-wifi-and-bluetooth-problem/
THIS IS AN OS WHICH I AM USING FOR DAILY USES AND NOW I AM SHARING WITH YOU GUYS.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
" #DroidOnTime "
Code:
/*
*
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
*
*/
Stability and Performance
Lagfree with High Performance Results
Clutterless UI
Perfect Interface for every User
Enhanced default apps
Redesigned settings and QS panel
Full OMS support
Colour Engine Support
DotExtras !!
CLEAN FLASH :
USE TWRP TO FLASH
Download the latest build and GApps
Reboot to recovery
Make TWRP backup (EFS and MODEM partaion Necessary if SIM not Detected)
Wipe System, Data, Cache , Dalvik
Flash the latest build and GApps
Reboot
DIRTY FLASH :
Download the latest build
Reboot to recovery
Flash the latest build
Wipe Cache
Reboot
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once!
The root solution should be flashed together with every OTA update (= ROM Update) as long as the instructions of your
root solution do not state something else (="persistence on dirty flashing") !
Download ROM:http://www.mediafire.com/file/rn4e6jj13343to5/DOT-N-v1.2-20180411-n7100-UNOFFICIAL.zip
Download Gapps:
Note : Pico or Nano Gapps are recommended. We Don't prefer STOCK/HEAVY Gapps
OpenGApps
DO NOT EDIT OR MODIFY THIS ROMThank you. Hope you like it until I develop an oreo ROM.
XDA:DevDB Information
[ROM][7.1.2_r29] dotOS-v1.2 [N7100][28-12-2074], ROM for the Samsung Galaxy Note II
Contributors
santosh61
Source Code: https://github.com/DotOS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
Based On: LOS
Version Information
Status: Nightly
Created 2018-04-11
Last Updated 2018-04-11
Screenshots:
Downloading, will try it now
Upd. Flashed it abd the speed of system, animations is so incredible! I can just say one thing "WOW" ! nice work Santosh:victory:
Awesome work! @santosh61
Fantastic bro @santosh61, will download it and give you my feedback, and waiting for oreo, good luck dude
Keep going ??
Nice work !! @santosh61
Any bugs we have to know?
Standard nougat ones?
I got first problem with systemUI. Attached logcat. :silly:
Deleted
Downloading now. I hope this will last rom I will install
Me too got a bug.
I added extra tiles in qs.But now i cannot.When i press plus button on top or qs,the systemui crashes and restart it to lockscreen.
Everything except that works well.
hishamnoobie said:
Me too got a bug.
I added extra tiles in qs.But now i cannot.When i press plus button on top or qs,the systemui crashes and restart it to lockscreen.
Everything except that works well.
Click to expand...
Click to collapse
Yes same with me.
hishamnoobie said:
Me too got a bug.
I added extra tiles in qs.But now i cannot.When i press plus button on top or qs,the systemui crashes and restart it to lockscreen.
Everything except that works well.
Click to expand...
Click to collapse
Dxnxsh said:
Yes same with me.
Click to expand...
Click to collapse
Same here guys. I attached logcat file on previous page.
what root method have you used? Also, pico or Nano Gapps? Are you all(having qt problem) on magisk?
Hi
pls can help me I lost the( Not Registered On Network) when install this the Rom
AL-Hasani said:
Hi
pls can help me I lost the( Not Registered On Network) when install this the Rom
Click to expand...
Click to collapse
if you look in the OP (first post made by the developer) you will see this:
'''Make TWRP backup (EFS and MODEM partition Necessary if SIM not Detected)''
what does it mean?
Have you made a EFS and Modem backup with TWRP before flash the rom?
Then reboot to recovery and flash the back up back , because your EFS and Modem partition has been corrupted and you cannt be registerd to your mobile network.
if you dont have a EFS and Modem back up, the only way(s) I know to restore that are:
1. Reflash a known working rom that you previous had in your phone
after flash rom reboot in recovery and see if then you can take back your EFS and modem.
IF YOU DO, then your problem is solved. But if NOT,
2. FLASH STOCK ROM with odin, let it boot once and see if your sim card is recognized and you can registered to your network. If yes, flash TWRP with odin again.
Reboot in recovery, BACKUP your EFS and Modem partition, save it in 2-3 positions (ext sdcard, PC, cloud) and then continiue your custom rom flashing.
If in any of these need some help, just ask for more details
GOOD LUCK my friend
logosA said:
what root method have you used? Also, pico or Nano Gapps? Are you all(having qt problem) on magisk?
Click to expand...
Click to collapse
I'm using lineage su add-on.
nNeFeroN said:
I'm using lineage su add-on.
Click to expand...
Click to collapse
kernel? Stock? or something else?
I am on Hybrid Boeffla v9.8
logosA said:
kernel? Stock? or something else?
I am on Hybrid Boeffla v9.8
Click to expand...
Click to collapse
Everything is stock. Nothing has been change in system except installing su add-on.
I reflashed ROM, everything worked. But after few hours QS tiles settings started to crash again.
Maybe it is lineaguSu?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 8.1 (Oreo), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void. Knox 0x1.
*
* We are not responsible for bricked devices, dead SD cards,
* lost data due to failed backups, etc, etc.
* flash at your own risk
*/
How to flash this ROM:
Download the zip file. (Make sure to download the file for your specific device)
Make sure this zip file is saved to your device (I prefer transferring to sd card to allow for full wipe of data on phone).
If you want Google Play functionality, download OpenGApps (link below). (optional)
Reboot into TWRP (Volume Up + Home + Power or Advanced Restart).
Make a backup (optional).
Wipe System, Data, Cache, and Dalvik Cache partitions with Advanced Wipe. (I like wiping internal data too, do NOT wipe SD Card!)
Flash the ROM you just downloaded.
Flash OpenGApps for Android 8.1 if you want Google services (optional).
If you want root, flash Magisk.
Reboot and proceed normally with installation.
Download links:
HLTE : HLTE
HLTECHN : HLTECHN
HLTEKOR : HLTEKOR
HLTETMO : HLTETMO
OpenGApps 8.1 (I use pico): http://opengapps.org
Source code:
LineageOS on GitHub
jfuginay (forked from LineageOS, and rest of the developers mentioned in the following Credits) on Github
Credits:
The LineageOS Team
haggertk
Trader418
andr01dfr3ak
temasek
TheMuppets
Version Information:
ROM OS Version: Android 8.1.0 Oreo
Kernel Version: Linux 3.4.113
Android security patch level: November 5, 2018
Known Bugs: bluetooth calls may not be working
All other functions seem to be working fine. Please report bugs with logcat
Screenshots
Hola, buenos días, gracias por compartir tu trabajo,¿Funciona para n900v?
Hello, good morning, thanks for sharing your work, does it work for n900v?
Yes, the n900v shares the hltetmo code name in LineageOS so it should work.
Try it and let me know ?
Perfect
I just installed it on my N900V and excellent works: Automatic rotation to ?, Bluetooth very well, is not cut, only calls with Bluetooth do not work, but otherwise very well, thank you very much, very well work, congratulations ?
franciscojarobles said:
I just installed it on my N900V and excellent works: Automatic rotation to ?, Bluetooth very well, is not cut, only calls with Bluetooth do not work, but otherwise very well, thank you very much, very well work, congratulations ?
Click to expand...
Click to collapse
Thanks. I just noticed now that Bluetooth calls aren't working for me either, but Bluetooth music playback is smooth without cutting in and out, so that's a plus.
I'll be working on getting Bluetooth calls fixed, hopefully by next weekly build which I'll probably do on the weekend.
Working well here. It appears that using the speakerphone during a call mutes the microphone. Only thing I've noticed so far. Thanks for this!
patrioticparadox said:
Working well here. It appears that using the speakerphone during a call mutes the microphone. Only thing I've noticed so far. Thanks for this!
Click to expand...
Click to collapse
What version of note 3 are you running? I use speakerphone on my TMobile note 3 for all my calls and haven't had an issue with the mic being muted yet.
Are you rooted? If so, how?
Using Xposed?
I am rooted (Magisk v16.0), no Xposed yet. Pretty sure my modem and whatnot are out if date but hadn't updated them yet as they were working with Lineage 14.1. Made the mistake of encrypting and now can't get into TWRP. I'll try to check logs later and see if I can get anymore info. Sounds like it's gonna be on my end.
I haven't updated my twrp in a while, its still 2.7, still should work right?
alexishaze said:
I haven't updated my twrp in a while, its still 2.7, still should work right?
Click to expand...
Click to collapse
It's possible, but most devs recommend using TWRP 3.0.2+ for any Android version 6.0 or higher. We're doing 8.1 with this ROM so I'd definitely upgrade TWRP first.
alexishaze said:
I haven't updated my twrp in a while, its still 2.7, still should work right?
Click to expand...
Click to collapse
https://dl.twrp.me/hltetmo/twrp-3.2.3-0-hltetmo.img
Link to latest TWRP for note 3
Jfuginay said:
Link to latest TWRP for note 3
Click to expand...
Click to collapse
Is there a difference between the twrp you linked above and the ones found at this link:xxxxxxxxxxxxxx ??? (I'm not allowed to post links yet, but google "twrp hltetmo" and you'll see what I'm talking about)
I found that part of TWRP's site with google - and couldn't figure out how to actually navigate to that page from within their site...
Also, I have two questions, you mention in OP that you are not having radio power issues - what you listed as (3) describes a bug I have been seeing frequently running RR - is this still the case a week later? And, how is the phone working with regards to incoming/outgoing calls?
damnZSquirrels said:
Is there a difference between the twrp you linked above and the ones found at this link:xxxxxxxxxxxxxx ??? (I'm not allowed to post links yet, but google "twrp hltetmo" and you'll see what I'm talking about)
I found that part of TWRP's site with google - and couldn't figure out how to actually navigate to that page from within their site...
Also, I have two questions, you mention in OP that you are not having radio power issues - what you listed as (3) describes a bug I have been seeing frequently running RR - is this still the case a week later? And, how is the phone working with regards to incoming/outgoing calls?
Click to expand...
Click to collapse
Updated my link, I accidentally put link to hlte twrp instead of hltetmo specific one.
As for #3 on the problems list of OP, I'm still running the same build and the network is still working well. Incoming and out going calls working just fine. I have bad cell reception at work, on previous ROMs I would leave work and still have no signal until I reboot my phone. On my current ROM I can just step outside and the network kicks on again.
I get my larger hard drive from Amazon tomorrow so I plan on releasing a new build tomorrow night if all goes well.
(Wed night, Aug 22nd, or Thurs night at the latest)
@Jfuginay are you using the FPL1 firmware. It's been a while so I was thinking about fully flashing the latest Stock firmware and then ROMing from there. That way I can rule out any firmware issues and start completely fresh. Piece of mind, ya know?
Edited for the nightlies to start rolling :victory:
patrioticparadox said:
@Jfuginay are you using the FPL1 firmware. It's been a while so I was thinking about fully flashing the latest Stock firmware and then ROMing from there. That way I can rule out any firmware issues and start completely fresh. Piece of mind, ya know?
Edited for the nightlies to start rolling :victory:
Click to expand...
Click to collapse
No, I'm on a different one. Screenshot attached. Will be doing a clean install of latest build once it finishes compiling before uploading.
Coming from latest Stock N900TUVUFQD2 I am unable to boot into any version of twrp over 2.8.7.0. Will this rom boot with this version of twrp?
Any help booting into the latest version of twrp is also appreciated.
New 8/24/2018 build is up, follow original download link to locate and download file.
Built on my Toshiba Tecra z40a running Lubuntu (first build was on an old HP pavillion laptop)
Build took only 3 hours and 40 minutes, my first build on older laptop took over 11 hours!
Visit LineageOS 15.1 for changelog. Most changes are to lineage apps and small kernel tweaks.
I gave the original build a try after posting earlier. The radio definitely works better than with RR - while I have had a few instances where it seems the signal gets "stuck" on GMS or EDGE, a quick toggle of airplane mode quickly clears things up. Also, the built in dialer in the DIGITS app works much better - texting & calling over wifi both work (sometimes I have to toggle wifi to get it to connect, but I think that might be an issue on t-mobile's end).
I'll be trying your latest build just after I post this reply.
---------- Post added at 04:55 PM ---------- Previous post was at 04:32 PM ----------
iPack said:
Coming from latest Stock N900TUVUFQD2 I am unable to boot into any version of twrp over 2.8.7.0. Will this rom boot with this version of twrp?
Any help booting into the latest version of twrp is also appreciated.
Click to expand...
Click to collapse
I am using Twrp3.2.3. I believe you can upgrade by installing from within TWRP or flashing with ODIN.
https://twrp.me/samsung/samsunggalaxynote3qualcomm.html -->read the install instructions here
https://dl.twrp.me/hltetmo/ -->download the file for your chosen method here
Last time I went back to stock, I flashed the FQD2 firmware with ODIN 3.12, CF-AutoRoot (odin again), then twrp3.2.3(also with odin).
Cant upgrade to any twrp higher than 2.8. and no rom not even one boots on my note 3
i even flashed this N900TUVUFQD2 stock rom in hopes that maybe my bootloader was outdated but it did not help., I still cant boot any rom . they either bootloop or dont get past flashing also my phone says qulcom secure boot enabled (CSB) in odin is that normal... note 3 tmobile
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CarbonROM is an aftermarket firmware based on the Android Open Source Project. We are dedicated to fast, stable, and feature-filled roms, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best rom we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.
Please feel free to look, build, and use our code at Github and at Gerrit.
Disclaimer
Flash and use with your own risk.
Please read whole this thread for minimize FAQ
Notice
Before you flash, backup everything important of your device, then flash the ROM in TWRP.
Bugs
You tell me (with logs please)
Download and Installing
Carbon Pie ROM at here
Latest arm64GAPPs (Optional, Pico recommended)
Wipe system, dalvik/art cache, cache, data partition
Flash Carbon Rom and GAPPs throught TWRP.
Wipe dalvik/art and cache partition
Reboot your device and Enjoy Carbon Rom.
Source tree
Device
Vendor
Sensors
Kernel
Special thanks
CarbonROM Team
Alberto97 for his repos
Me
XDA:DevDB Information
CarbonROM for Moto Z Play, ROM for the Moto Z Play
Contributors
Stayn
Source Code: https://github.com/CarbonROM
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: Unlocked Bootloader and TWRP Recovery
Version Information
Status: Stable
Created 2019-05-23
Last Updated 2019-08-10
Features added to this ROM:
Powered by ArtxPlay Kernel
Boosted Headphones volume
Optimized Shutdown and Restart time (now its 1s - 2s always)
Optimizations from Android GO
Enabled touch optimizations
Enabled PinnerService to keep loaded critical apps into memory
(framework, default launcher, default camera, SystemUI...)
SystemUI Pre-Optimized
And more...
Changelog:
* 8/10/2019
Fixed reboot, sim and other issues
Now using ArtxKernel 3.0 (Simplified, clean)
Added some settings at boot
* 5/23/2019
Initial Release
Omg, A new rom!! This morning I flashed AOSP (Xperience was giving me a poor battery life) but I don't care, I must try this one asap!
Thanks for this man. I'll report if anything happens.
Dovahkiin1290 said:
Omg, A new rom!! This morning I flashed AOSP (Xperience was giving me a poor battery life) but I don't care, I must try this one asap!
Thanks for this man. I'll report if anything happens.
Click to expand...
Click to collapse
Sure, feedback will be appreciated!
Another rom hurray! after so many become closed something new. Could you maybe pick up some Lineage rom and keep going 16 is pretty good?
Good to see new rom - only disadvantage for me that it is arm - 32bit :/ . I prefer arm64 roms since I don't have problems with them .
Hey,
long time custom rom user but lurking here. It's great that you bring a new ROM for this phone. Everything works great as far as I can tell. No magisk boot or battery problems.
2 very minor things I would like to see fixed/added: 1) Status bar icons don't fit inside the box. Wi-Fi and Auto-Rotate flood and get out of border. Also I remember a settings button being present there without the need to expand the menu. 2) Add touch fingerprint for lock option.
EDIT: Mobile network seems to not work (no access point names?)
EDIT2: Added them manually and everything is fine
Always great to have a new ROM, thanks!! Unfortunately it's always rebooting into recovery after some few minutes, even without gapps. It even showed the "Shutting Down" system message . Also the ROM didn't find my SIM and I didn't have any mobile network, i would have tried adding access point names if it wasn't for the constant reboots. I have copied logs from recovery, if that is what you wanted I can share with you.
all good until now only difficulty in the optimization in the camera! presents delays. I can not find the option to wake up and sleep the phone with the fingerprint reader
FelTell13 said:
Always great to have a new ROM, thanks!! Unfortunately it's always rebooting into recovery after some few minutes, even without gapps. It even showed the "Shutting Down" system message . Also the ROM didn't find my SIM and I didn't have any mobile network, i would have tried adding access point names if it wasn't for the constant reboots. I have copied logs from recovery, if that is what you wanted I can share with you.
Click to expand...
Click to collapse
Always provide logs, also, whats your flashing procedure?
Stayn said:
Always provide logs, also, whats your flashing procedure?
Click to expand...
Click to collapse
Wipe Dalvik,System,data and cache
Install ROM and Gapps
wipe cache and dalvik
reboot
I even tried without gapps and it still turned off.
Here is the logs
Thank you for new rom! Will try it
Edit: Ok, it reboots to recovery after few minutes. Can't use it by now.
Very good ROM, no problem so far. Just note that the navbar at times is half, you can not see the complete drawing. The icons in the status bar solve them by shrinking the screen, sorry for my English and thanks
manfred18 said:
Thank you for new rom! Will try it
Edit: Ok, it reboots to recovery after few minutes. Can't use it by now.
Click to expand...
Click to collapse
Are you using some Magisk module? Because for me that was the issue while using other two roms. The only solution was to avoid flashing any module and the phone worked just fine, no reboots or data corruption.
Dovahkiin1290 said:
Are you using some Magisk module? Because for me that was the issue while using other two roms. The only solution was to avoid flashing any module and the phone worked just fine, no reboots or data corruption.
Click to expand...
Click to collapse
I had the same problem as him, and no, even without flashing Magisk I still had the reboot...
sebx_g1 said:
Good to see new rom - only disadvantage for me that it is arm - 32bit :/ . I prefer arm64 roms since I don't have problems with them .
Click to expand...
Click to collapse
+1
bootloop..
FelTell13 said:
Always great to have a new ROM, thanks!! Unfortunately it's always rebooting into recovery after some few minutes, even without gapps. It even showed the "Shutting Down" system message . Also the ROM didn't find my SIM and I didn't have any mobile network, i would have tried adding access point names if it wasn't for the constant reboots. I have copied logs from recovery, if that is what you wanted I can share with you.
Click to expand...
Click to collapse
FelTell13 said:
Wipe Dalvik,System,data and cache
Install ROM and Gapps
wipe cache and dalvik
reboot
I even tried without gapps and it still turned off.
Here is the logs
Click to expand...
Click to collapse
manfred18 said:
Thank you for new rom! Will try it
Edit: Ok, it reboots to recovery after few minutes. Can't use it by now.
Click to expand...
Click to collapse
FelTell13 said:
I had the same problem as him, and no, even without flashing Magisk I still had the reboot...
Click to expand...
Click to collapse
New update
For you guys and others with sim card problems download the ROM from here or the OP
This build most likely fixes that problem, if not, I'll prepare another solution, thanks
Stayn said:
New update
For you guys and others with sim card problems download the ROM from here or the OP
This build most likely fixes that problem, if not, I'll prepare another solution, thanks
Click to expand...
Click to collapse
Lets see how it works - I am a bit tired with all GSIs ...:silly:
--- Rom boots to desktop then do auto shutdown and return to recovery --- interesting never seen that before ?! (with Magisk 19.2 + gapps nano) .
Clean rom flashed again - it lasted longer before reboot to recovery on desktop - so I manage to see that no sim problem is still there :/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ProjectStreak for the Xiaomi Mi A2 [jasmine_sprout]
Code:
/*
* Your warranty is void. Or vaild, probably?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or the current economic crisis caused by you following
* these directions. YOU are choosing to make these modificiations, and if
* you point your finger at me for messing up your device, I will LMAO at you.
*/
About
ProjectStreak is just an another aftermarket OS based on Android Open Source Project. Even though we focus on stability and performace, we still allow user to customize system to his own needs.
Flashing instructions
Clean Flash
1. Download the ROM.zip
2. Reboot to Recovery
3. Wipe everything including data
4. Format data
5. Flash the ROM.zip
6. Change to opposite slot
7. Reboot to system
Dirty Flash
1. Download the ROM.zip
2. Reboot to Recovery
3. Flash the ROM
4. Reboot to System
Bugs
1. Re-set wallpaper to eliminate screen flickers, it will permanently gone
Download
Download latest build from our webpage:
https://projectstreak.pl/download?device=jasmine_sprout
XDA:DevDB Information
Project Streak, ROM for jasmine_sprout
Android OS version: 12.1
Security patch level: May 2022
Based On: AOSP
Build Author: clarencelol
Source Code: https://github.com/ProjectStreak
Kernel Source Code: https://github.com/clarencelol/kernel_xiaomi_sdm660-4.19
ROM Developer: ejbtrd
Version Information
Status: Stable
Stable Release Date: 17 May 2022
Created: 18 May 2022
Last Updated: 18 May 2022
Reserved
Nais
Thanks for the your effort, will OTA supported?
Thank you very much , great rom
BakAkira said:
Thank you very much , great rom
Click to expand...
Click to collapse
been using this rom? any issues? what about performance, stuttering?
ClarenceK said:
Reserved
Click to expand...
Click to collapse
@ClarenceK support for OTA updates?
marcioluis said:
been using this rom? any issues? what about performance, stuttering?
@ClarenceK support for OTA updates?
Click to expand...
Click to collapse
I installed it 12 hours ago and it runs smoothly until now
congrats on the rom!
nicely done!
The waiting time is over...This ROM is awesome..
Using it since yesterday ( 24hrs ) and still doing great. smooth UI, No bugs found so far...
Thank you very much for keeping our device live...
mohp said:
Thanks for the your effort, will OTA supported?
Click to expand...
Click to collapse
It will in the future
@ClarenceK , is it possible for you to make a VANILLA version?
Somehow I couldn't get this ROM to working. Either installed but TWRP says no OS installed or OS run but my IMEI is gone.
Edit:
Finally its installed. So no OS installed doesn't mean its failed.
Thanks alot for this ROM!
Can someonte tell me if it passes safetynet, so the banking apps work?
Also if the google photos storage is unlimited?
surfadas said:
Thanks alot for this ROM!
Can someonte tell me if it passes safetynet, so the banking apps work?
Also if the google photos storage is unlimited?
Click to expand...
Click to collapse
Yes, it passes the safetynet correctly and also has the unlimited storage on google photos.
It's really good ROM, very smooth and the developer added a few extra animations. I really love it
Our device is becoming too old for this new ROMs yet try hard to rock on. Same is for this ROM that like every one tested it good for some days, than the age and the overall slowness of this device show up and we can do nothing about it. I will test Android 13 when it will come out for us, but I think it will be the last on this device before I'll switch to something new.
Anyway, back to the ROM, after a month of use it's pretty solid. No useless things, just pure ROM that works.
Complains? Two.
1) Flickering happens occasionally on Telegram and some other apps. Changing background or other solutions posted doesn't affect it. It happens just sometimes so no major complains, but still.
2) Constantly repeating UI message when my camera is locked but I WANT to be locked. Don't need to ask me every (literally!) 5 seconds if I want to unlock the camera. I want it toggled off and just ONE friendly reminder would be enough.
This version is very good, when does the update come out?
the Android system is already informing that it has an update, but it is not possible to update because it is the ProjectStreak version.
It ist a good rom, but needs more battry than lineageOS.
An update is available but i get an error when i want to update.
I have been using this ROM for the last 4 weeks and here is my conclusion.
- After a clean installation, the ROM works great than other competitive ROMS. Smooth UI, Not visible Lagging, Apps works fine including the bank apps.
but using 2-3 weeks, the ROM gets slow. I even couldn't open the Camera ( GCam) / Dial Pad because the screen froze for 5-10 seconds. I tried cleaning junk files and limiting background running apps but nothing changed.
So till we get an update from the developer, I moved to another A11 ROM because I need a stable phone while I work. Hope the developer will release an update with bugs fixed and can not wait to try that.
Highly appreciate the developer's work and thanks to them our old devices are still breathing....cheers!
Hi ,
Can someone help me?
I don't know what went wrong but I think I missed out something.
I flashed the ROM and booted it successfully, but now I am trying to boot it into TWRP and I think it's getting booted into ROM's recovery.
Shall I know, what are the ways that I can boot my phone into TWRP? Do I have to flash it using adb/cmd?
SaurabhBandelkar said:
Hi ,
Can someone help me?
I don't know what went wrong but I think I missed out something.
I flashed the ROM and booted it successfully, but now I am trying to boot it into TWRP and I think it's getting booted into ROM's recovery.
Shall I know, what are the ways that I can boot my phone into TWRP? Do I have to flash it using adb/cmd?
Click to expand...
Click to collapse
Have you flashed the TWRP or temporary booted TWRP to install the ROM...If you haven't flashed the recovery image, then you don't have the TWRP recovery on your phone..You can always temporary boot to TWRP using the boot image...or you can permanently flash TWRP recovery.