{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CYANOGENMOD 13.0 FOR LG L FINO
NOTICE:
THE DEVELOPERS OF THIS ROM DO NOT SHARE ANY RESPONSIBILITY FOR DAMAGED DEVICES, AFTER INSTALLING, OR IN THE PROCESS OF INSTALLING THIS SOFTWARE. MODIFYING YOUR DEVICE IN ANY WAY VOIDS YOUR WARRANTY. PLEASE CONTINUE AT YOUR OWN RISK.
This rom runs on:
LG L70pn (D290n)
LG L70pds (D295)
FEATURES
All the device hardware is fully supported and working
Kernel based on CyanogenMod's official kernel for msm8226 based devices
Official CyanogenMod's Snap camera application and Gello web browser
Adoptable Storage support
Doze
FEATURES NOT WORKING YET
Some people report problems with dual sim configuration on D295
SPECIAL THANKS
@proudlytm for testing, bug reporting and building for L70pds. Also for creating TWRP recovery for the L Fino.
@Quarx2k for the msm8226 kernel
@vm03 for his work on getting CyanogenMod on msm8610 devices
The CyanogenMod team
Google for creating Android
LG for creating L Fino
CODE REPOSITORIES
KERNEL: https://github.com/geekydoc/android_kernel_lge_msm8610
DEVICE: https://github.com/geekydoc/android_device_l70pn and https://github.com/geekydoc/android_device_l70pds
BUG REPORTING
Please report any bugs using the XDA Bug Reporting Facilities, or by visiting the following links:
FOR L70PN: https://github.com/geekydoc/android_device_l70pn/issues
FOR L70PDS: https://github.com/geekydoc/android_device_l70pds/issues
INSTALLATION INSTRUCTIONS
Backup sensitive data
Get and install TWRP for your device variant, see this thread
Obtain the latest zip from the LINKS section below
If you are coming from another rom project (or stock), you have to attempt a full wipe before installing. On TWRP, go to Wipe -> Advanced Wipe and select ART Cache, Data, Cache, System. If you were using Adoptable Storage on a previous rom, chances are it won't get recognised by the new rom, in this case select External Storage too. This will erase all the data stored on your SD card.
Flash the zip using TWRP
Reboot and enjoy
LINKS
Latest build is: cm13.0-20161205-UNOFFICIAL
Latest builds can be downloaded from the links below:
L70PN: https://mega.nz/#!ptJlnZoT!XXI60D_Sm11jlYLKcMTDVVM2Jml12kCh0Ye-EMbXwFI
L70PDS: https://mega.nz/#!ZdUFlYLQ!v3TE5dx_CY-okGRVGlpUtdI19pV5n39AuMHcy_cHDg0
Please Note: TWRP recovery does not support adoptable storage on L Fino yet. If you are using this feature, you have to use a workaround to install rom zips. The workaround is posted by proudlytm (thanks mate!) here
XDA:DevDB Information
CyanogenMod 13.0 for LG L FINO, ROM for the LG L Fino
Contributors
christpp, proudlytm, g-pl
Source Code: https://github.com/CyanogenMod
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 20161205-UNOFFICIAL
Created 2016-10-09
Last Updated 2017-06-20
CHANGELOG:
cm13.0-20161206-UNOFFICIAL
kernel:apds9130: generate interrupt after only 1 value out of range
init: set proximity detection to 10cm
init: don't use flash storage as entropy source
init: Various clean ups and fixes
PowerHAL: Use hex-edited libqc-opt.so and update mpdecision blob
Add Widevine blobs
IMX219: patched libchromatix: camera fix not needed anymore
BoardConfig: Use dlmalloc and add some optimization flags
l70pn: Set the device model in build.prop
cm13.0-20161122-UNOFFICIAL
Set SELinux to Enforcing
PowerHAL: Use shimmed libqc-opt.so library
Kernel: Various security and stability patches
Init: Clean up and Update Graphics permissions
cm13.0-20161111-UNOFFICIAL
Enable CMActions
Snap: Enable more configuration options
Kernel: Enable CONFIG_UID_CPUTIME
cm13.0-20161109-UNOFFICIAL
Enable Ambient Display support
Disable gps overlay and update gps configuration
cm13.0-20161103-UNOFFICIAL
Clean up system build properties and disable init libs
I/O: Enable and use bfq scheduler
Increase SD card read_ahead cache to 2048kb
Use qcom FMradio app to fix volume control issue
l70pds: Add build properties for dual sim configuration
l70pn: NFC fix
cm13.0-20161026-UNOFFICIAL
Use an overlay to change slow charging threshold
Disable IpReachability Monitor to fix internet disconnects
Update Wifi configuration, now based on Cyanogenmod's msm8226-common configuration
l70pds: Update kernel configuration to fix the colour calibration issue
cm13.0-20161024-UNOFFICIAL
Fixed accelerometer
Enabled Tap To Wake Feature
Changed Some USB Vendor IDs
cm13.0-20161020-UNOFFICIAL
Fix Cameras #2 : Video recording is now working properly
Enable Gello browser
Enable Snap camera app
cm13.0-20161017-UNOFFICIAL
Fix Cameras #1 : Both cameras can now take still images
cm13.0-20161009-UNOFFICIAL
First Build
ISSUES & WORKAROUNDS
Some steaming videos cannot be played through an app that uses webview
WORKAROUND: Install Android Webview from the Google Play Store. CyanogenMod comes with Chromium Webview by default. This does not play all online streamable video content.
After a soft-reboot, adopted MicroSD card is not accessible and shown as corrupted under storage settings.
WORKAROUND: Do not format the storage as advised by the operating system. It should be accessible and working properly after a hard reboot.
WiFi network disconnects from the access point for no reason.
WORKAROUND: This bug should be fixed after the 20161026 update. If it persists, try enabling Settings->Developer Options->Use legacy DHCP client. If it still persists, please report the issue on this thread.
THANK YOU !
Testing on D295 till now runs buttery smooth.
If anything appears i will let you know !
Excellent!
Running smoth, as I can se, we have preview of both camera but hangs on saving, also there are some artifacts on camera preview on imx sensor, maybe someone should check with that guy who edited build prop on cm12.1
Also, strange problem, facebook and messenger app hangs also, not able even to log in.
Sent from my LG-D290n using XDA-Developers mobile app
Alex? said:
Excellent!
Running smoth, as I can se, we have preview of both camera but hangs on saving, also there are some artifacts on camera preview on imx sensor, maybe someone should check with that guy who edited build prop on cm12.1
Also, strange problem, facebook and messenger app hangs also, not able even to log in.
Sent from my LG-D290n using XDA-Developers mobile app
Click to expand...
Click to collapse
Hey, thanks for installing and reporting! Camera fixes will be coming soon I hope! The issue with messenger and probably facebook app is cyanogenmod 13 specific. There is a solution here: http://en.miui.com/thread-195550-1-1.html
Thank you
I don't have any artifacts but it is because of my sensor i suppose i didn't had those problems on the 12.1 rom as well, Anyhow the only thing that i am registering as a problem for now is that i can't connect a weather provider to the weather.Somehow it does not appear on the selection list .I tried with Weather Underground,Yahoo Weather and CM Cheetah Mobile weather.
There is a known bug with Nova Launcher which causes the pull down menu to be slow but this is a problem of Nova and Android 6.
Thanks man!
Thanx man its awesome
---------- Post added at 12:17 PM ---------- Previous post was at 12:13 PM ----------
Alex? said:
Excellent!
Running smoth, as I can se, we have preview of both camera but hangs on saving, also there are some artifacts on camera preview on imx sensor, maybe someone should check with that guy who edited build prop on cm12.1
Also, strange problem, facebook and messenger app hangs also, not able even to log in.
Sent from my LG-D290n using XDA-Developers mobile app
Click to expand...
Click to collapse
i have the same sensor and i am trying to edit the build prop for the cm13 now
i will post the zip when its ready
hi
i managed to Fix Camera White Artefacts with a build prop edit just like in cm12.1
hope it works for u guys :good::good::good:
i also added some build prop edits to improve battery life and ram usage hop u guys like it
mountaser halak said:
hi
i managed to Fix Camera White Artefacts with a build prop edit just like in cm12.1
hope it works for u guys :good::good::good:
Click to expand...
Click to collapse
Can the camera store images with this fix man ?
Stersound said:
Can the camera store images with this fix man ?
Click to expand...
Click to collapse
no it only removes White Artefacts on imx sensor
mountaser halak said:
Thanx man its awesome
---------- Post added at 12:17 PM ---------- Previous post was at 12:13 PM ----------
i have the same sensor and i am trying to edit the build prop for the cm13 now
i will post the zip when its ready
Click to expand...
Click to collapse
Thanks man!
Sent from my LG-D290n using XDA-Developers mobile app
---------- Post added at 04:55 PM ---------- Previous post was at 04:34 PM ----------
mountaser halak said:
Thanx man its awesome
---------- Post added at 12:17 PM ---------- Previous post was at 12:13 PM ----------
i have the same sensor and i am trying to edit the build prop for the cm13 now
i will post the zip when its ready
Click to expand...
Click to collapse
It worked man, thaks!
Sent from my LG-D290n using XDA-Developers mobile app
Can I use this rom on my reparted phone? I used a script from the cm12.1 thread that the user "Alex?" uploaded
elpipeta said:
Can I use this rom on my reparted phone? I used a script from the cm12.1 thread that the user "Alex?" uploaded
Click to expand...
Click to collapse
I don't think you can use the script on CM 13, since the system partition is a different size now..
Works great! But I am not able to get the accelerometer to work. It did work initially, but after a few hours it(auto-rotate,compass) stopped working.. any quick fixes?
Thanks!
Since yesterday everything works pretty fine accept 2-3 things.
1.Rotation(accelerometer)
2.live display ( i got a notification at evening,although i was searching for this tile and in the menu but i did not find it,when i tried to change it through the notification nothing happened) and it does not change color temperature)
3.Weather(tried with several weather providers )
Hope this is helpful.
Cheers.
elpipeta said:
Can I use this rom on my reparted phone? I used a script from the cm12.1 thread that the user "Alex?" uploaded
Click to expand...
Click to collapse
I am woking on a new script for the cm13 i will post it ass soon as it work
Hi
i made a new script for repartitoning the internal storage with new valus that is compatible with CM13
just run cm13-Repartition.cmd for partitioning the internal storage for instaling cm13
and run Stock-Repartition if u want to flash stock the LG stock kitkat rom
Warning I am not responsible for any damage! do it on your own Risk !!!!
hope this was helpful i just tried it myself and it's working perfectly
feel free to ask anything :good:
:angel::angel::angel::angel::angel:
mountaser halak said:
Hi
i made a new script for repartitoning the internal storage with new valus that is compatible with CM13
just run cm13-Repartition.cmd for partitioning the internal storage for instaling cm13
and run Stock-Repartition if u want to flash stock the LG stock kitkat rom
Warning I am not responsible for any damage! do it on your own Risk !!!!
hope this was helpful i just tried it myself and it's working perfectly
feel free to ask anything :good:
:angel::angel::angel::angel::angel:
Click to expand...
Click to collapse
Why not use the portable storage ?
Ky$h said:
Why not use the portable storage ?
Click to expand...
Click to collapse
i am having problems with it and it wont move everything to the sd card i had a storage is full notification yaster day after instaling all of my apps
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello XDA, I proudly present you with a port of CyanogenMod 11S
This ROM supports the International LTE (m7_ul), GSM (m7_u), AT&T (m7att) and T-Mobile (m7tmo) variants
All CyanogenMod 11S features
AudioFX
Screencast
Themes Showcase
Modified Lockscreen
Advanced Theming Capabilities
Cyanogen Inc. Bootanimation
ART Compatible
OnePlus Camera
Latest Android 4.4.4 (KitKat)
Integrated CM Kernel Control in Settings
Integrated CM Superuser in Settings
Init.d Support
Odexed
Very Stable
Super Smooth
Great Battery Life
Project ERA Sound
MultiROM Support
The best RAM management around
Click to expand...
Click to collapse
Click to Show Content
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Make sure you have a custom recovery installed. Recommended recoveries are TWRP 2.7.1.1, MultiROM TWRP 2.8.0, 2.7.0 and ClockworkMod Recovery
Download the ROM and place it on your SD Card
Reboot into recovery
Wipe Data, Cache and Dalvik-Cache
Install the ROM
Reboot and Enjoy
Click to expand...
Click to collapse
Installing ROM as Primary ROMPlease note that MultiROM is optional
Just follow the Installation Instructions above and make sure "Inject MultiROM" is checked before flashing
Please note that the kernel inside this ROM does NOT have the kexec-hardboot patch
Installing ROM as Secondary ROM
Before doing this, make sure your primary ROM's kernel has kexec-hardboot patch, the MultiROM zip installed and you have MultiROM TWRP 2.7.0 installed
Download the ROM and place it on your SD Card
Reboot to recovery
Go to Advanced > MultiROM > Add ROMs > (Make sure Android is selected) Next > ZIP File > Select the v8.x zip and let it install
When you reboot you should see your Internal ROM and CyanogenMod 11S
Click to expand...
Click to collapse
#166#168#169#173#471
Click to expand...
Click to collapse
v8.5 revision 2: Download from Mega.co.nz
Add-ons
Wake Gestures Kernel: Download from Dev-Host
Dynamic Lockscreen: Download from DropBox
Stock CM11 Lockscreen Download from AndroidFileHost
Thanks to @santod040 for the Wake Gestures Kernel
Thanks to @rush25 for the Dynamic Lockscreen (info)
Gapps are not required, they are included in the ROM
Click to expand...
Click to collapse
Editing photos in Gallery doesn't workAny bug currently present in CM11
Click to expand...
Click to collapse
Github
Click to expand...
Click to collapse
@dd98@mike1986.@ZeroInfinity@P4R@CyanogenModOnePlus
Click to expand...
Click to collapse
Click to expand...
Click to collapse
XDA:DevDB Information
CyanogenMod 11S, ROM for the HTC One
Contributors
dd98, mike1986., ZeroInfinity, CyanogenMod
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Latest TWRP or CWM Recovery
Based On: Stock OnePlus One ROM
Version Information
Status: No Longer Updated
Current Stable Version: 8.5
Stable Release Date: 2014-11-23
Created 2014-07-20
Last Updated 2015-02-17
OnePlus One Wallpapers
For anyone looking for the stock OnePlus One wallpapers
Download: Here
OnePlus Splashscreen (thanks to @iElvis)
Splashscreen: Download from Dev-Host
NOTE! You must be S-OFF and flash in recovery
Picture of it is attachment.php.jpg
Changelog
Code:
[B][COLOR="Red"][U]Version 1.0[/U][/COLOR][/B]
Initial Release
[COLOR="Red"][B][U]Version 2.0[/U][/B][/COLOR]
Odexed for ART Support
Added in some missing apps
Added Official 1+1 Launcher
Added Google Camera
Added GPU UI Rendering
Added Build.prop tweaks
Overall smoother and better battery life
Removed CyanogenMod FOTA
Removed 1+1 Camera
[COLOR="Red"][B][U]Version 2.5[/U][/B][/COLOR]
Added OTA Support
[COLOR="Red"][B][U]Version 3.0[/U][/B][/COLOR]
Rebased to CyanogenMod 11 Milestone 9
Fixed App Compatability Issues
Fixed any remaining Google Apps Issues
Updated Google Apps
Sysro/Sysrw Tweaks
Init.d Tweaks
Even faster and smoother
[COLOR="Red"][B][U]Version 4.0[/U][/B][/COLOR]
Fixed OnePlus Camera FC
Added OnePlus Camera
Added MultiROM compatability
Updated OEM Apps
Stability Improvements
Fixed Random Freezing
Removed Google Camera
Removed OTA Support
[COLOR="Red"][B][U]Version 5.0[/U][/B][/COLOR]
Battery Life Improvements
Stability Improvements
Cleaned up unwanted files
[COLOR="Red"][B][U]Version 6.0[/U][/B][/COLOR]
Added Android Revolution HD Tweaks
Improved RAM management
Fixed mm-qcamera-daemon battery drain
[COLOR="Red"][B][U]Version 7.0[/U][/B][/COLOR]
Added Project ERA Sound Mod
Better Battery Management
Cleaned up some more unwanted files
[COLOR="Red"][B][U]Version 7.5[/U][/B][/COLOR]
Fixed Google Accounts sign-in FC
[COLOR="Red"][B][U]Version 8.0[/U][/B][/COLOR]
Updated base to CyanogenMod 11 Milestone 11
Various bug fixes
Compatability with OPO Dynamic Lockscreen Mod
[COLOR="Red"][B][U]Version 8.1[/U][/B][/COLOR]
Re-enabled OTA Support
[COLOR="Red"][B][U]Version 8.5[/U][/B][/COLOR]
Added in some missing files
Fixed OnePlus Front Camera FC
Updated GApps
Removed OTA
[COLOR="Red"][B][U]Version 8.5 (revision 2)[/U][/B][/COLOR]
Updated Core apps from Milestone 12
Various bugfixes
[COLOR="Red"][B][U]Version 9.0[/U][/B][/COLOR]
Added MaxxAudio and Swiftkey from XNP05Q OTA
Removed some useless files
Updated Project ERA to 23.1
Click to expand...
Click to collapse
..
Let's see how it goes
How did you managed to work it, my port doesnt boot :v
YudmudTR said:
How did you managed to work it, my port doesnt boot :v
Click to expand...
Click to collapse
...
Very cool I'll have to check this out! Thanks!
Installed I'll give it run. Thank you!
Google search force close when clicking on search bar.
Play store update fixed GS FC.
Great work ....... Have to give a try. Thanks..
Sent from my K00F using XDA Premium 4 mobile app
Is this ART compatible?
I've tried everything I can think of to install this on my m7, multiple twrp versions included, I keep getting failed ,also downloaded it twice just in case
Sent from my SM-N900A using Tapatalk
Installed just fine for me. Is there any way, on the lock screen, to swype down and then the pattern show?
Thanks in advance.
Sent from my One using XDA Premium 4 mobile app
Installed fine for me with latest TWRP. I accidently wiped storage lol.... getting adb sideload to work on Windows 8.1 is fun fun fun not. Camera app stops working when I snap a pic. Will take video tho. I'm going to reflash and try. Will report back in a few. Thanks for the great work !
---------- Post added at 10:40 PM ---------- Previous post was at 10:28 PM ----------
"Unfortantely, camera has stopped" - still getting that after wipe and flash. Thanks ! Will keep a lookout for updates.
Mine wont get past the boot octagon thing just keeps spinning around been doing that for past 20 mins
trident76 said:
I've tried everything I can think of to install this on my m7, multiple twrp versions included, I keep getting failed ,also downloaded it twice just in case
Sent from my SM-N900A using Tapatalk
Click to expand...
Click to collapse
I had to use the new TWRP 2.7.1.1 in order to get it to install, using 2.6.3.3 kept giving me an error.
I got it loaded fine using 2.7.1.1. Used it for a Lil bit. Two problems i had, When I plugged it in to charge, the phone wouldn't wake up. Even after I unplugged. Also had an issue with it staying in edit mode after I add a widget, the long press on the home screen edit mode. Reboot to fix that too.
ANDR01DN00B said:
Installed just fine for me. Is there any way, on the lock screen, to swype down and then the pattern show?
Thanks in advance.
Sent from my One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No there isn't its the way OnePlus designed the lockscreen
Iron.Wraith said:
Installed fine for me with latest TWRP. I accidently wiped storage lol.... getting adb sideload to work on Windows 8.1 is fun fun fun not. Camera app stops working when I snap a pic. Will take video tho. I'm going to reflash and try. Will report back in a few. Thanks for the great work !
---------- Post added at 10:40 PM ---------- Previous post was at 10:28 PM ----------
"Unfortantely, camera has stopped" - still getting that after wipe and flash. Thanks ! Will keep a lookout for updates.
Click to expand...
Click to collapse
I know about this and I'm trying to see what causes it
Great rom.
Thanks
Enviado desde mi One mediante Tapatalk
Iron.Wraith said:
Installed fine for me with latest TWRP. I accidently wiped storage lol.... getting adb sideload to work on Windows 8.1 is fun fun fun not. Camera app stops working when I snap a pic. Will take video tho. I'm going to reflash and try. Will report back in a few. Thanks for the great work !
---------- Post added at 10:40 PM ---------- Previous post was at 10:28 PM ----------
"Unfortantely, camera has stopped" - still getting that after wipe and flash. Thanks ! Will keep a lookout for updates.
Click to expand...
Click to collapse
Read the first post. Known issue and a temporary work around was posted there
Installed fine for me, no issues with me. Initially took a while to sync via bluetooth to my car, but worked fine after the initial hiccup. Battery life so far this morning seems good, although it's only been off the line for 2 hours, at 92% which is about normal for me, lots of use in the morning. Did seem to lock up also when trying to launch Chrome the first time, but again, has worked fine since then. Very nice ROM, great work!
Thread Closed....All support focus has moved to Lineage.
I am creating this thread as a place to discuss development of unofficial CM13 builds for the T31x devices. Those of you that have been around here for a while already know that I tend to get busy with other stuff and disappear a times. So, with that said, if you would like to contribute to the development of this rom, please feel free to do so. I can make you a contributor and you will have the ability to modify this OP as required.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Standard Disclaimer
#include <std/disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review.
IRC Channel for Development Chat: I am usually on weekdays 7-4 EST
http://webchat.freenode.net/?channels=Tab3Dev
What Doesn't Work:
- Bluetooth has audio issues
- External SDCard will not work as "internal" storage
INSTALLATION
- Make sure you're running latest TWRP 3.0.2-0
- Copy GApps and CM ZIPs to your internal or external SDCard
- Boot into Recovery
- Perform WIPE:
In TWRP, select Wipe --> Advanced Wipe.
Check Dalvik/ART Cache, System, Cache, and Data
Swipe to Wipe
- Flash CM zip
- Flash GApps zip
- Reboot
Updating to a newer version of THIS rom ("dirty" flash)
- Boot into Recovery
- Flash CM zip (no need to re-flash gapps or wipe anything)
- Reboot
If you have any issues after doing a "dirty" flash, do a clean install before reporting any problems.
Downloads
CyanogenMod
Builds: https://www.androidfilehost.com/?w=files&flid=44848
Google Apps
OpenGapps: http://opengapps.org (use an ARM, 6.0 zip) - now on tap needs mini or higher.
HEADS UP: Be sure you flash the gapps package when flashing your rom. If you boot your rom, then try to flash gapps later, you will have issues.
CHANGELOG
For a list of CM changes, you can review the i9300 nightly changelog located HERE.
The i9300 is a similar platform to ours, so most of what is listed there will be applicable for us, unless it is i9300 device specific.
SCREENSHOTS
Coming Soon
DEVICE SPECIFIC SOURCES
- Kernel: https://github.com/gr8nole/android_kernel_samsung_smdk4x12
- Common T31x device: https://github.com/gr8nole/android_device_samsung_lt01-common
- SM-T311: https://github.com/gr8nole/android_device_samsung_lt013g
- SM-T310: https://github.com/gr8nole/android_device_samsung_lt01wifi
- SM-T315: https://github.com/gr8nole/android_device_samsung_lt01lte
CONTRIBUTORS
- CyanogenMod Team, CyanogenMod and AOSP contributors.
- @ketut.kumajaya, for his earlier work in the Tab 3 community.
- @tohenk, for his CM-12.1 Samsung Galaxy Tab 3 8.0 builds/fixes.
If you're going to reuse our work, which we're doing for free, be fair and give proper credits.
This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
Open-Source doesn't meant Out-of-Respect!!!
XDA:DevDB Information
CM13 for T31x, ROM for the Samsung Galaxy Tab 3 8.0
Contributors
gr8nole
ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: KitKat Firmware
Based On: CyanogenMod 13
Version Information
Status: Beta
Created 2015-12-14
Last Updated 2017-01-03
Reserved
Tips:
If you flash a gapps package and get a force close on the keyboard, boot into TWRP, mount system, then choose the file manager option and delete /system/lib/libjni_latinimegoogle.so Fixed
You will need to give your browser permission to access storage before you can download anything with it. Go to Settings-Apps to adjust permissions.
If you flash a Gapps package with Google Camera, the camera may not work. Many i9300 users are reporting that the new Google Camera needs an API that we do not have and therefore will not work.
When connecting the tablet to a computer to transfer files, it will always initially be in "Charging" mode and you will need to select "File Transfer" mode by clicking on the notification on the tablet.
Camera - If you get "can't connect to camera" message, download Mediaserver Killer app from store and use it.
Netflix - If you get lines in your Netflix video, edit your data usage settings on the Netflix website to Low or Medium. I created a "mobile" profile and set the data usage to "low"; then selected that profile in the app and I no longer get the lines on the videos.
Google Movies - If you get a "license error", you need to give the Google Movies app permission to access "phone"; then reboot.
I have noticed that the latest version of Google Movies does not work (at least on my T310). It always gives the "failed to fetch license" error when trying to play purchased movies. I found this same problem when I first starting using CM13, but it could be solved then by giving the app permission to access "phone" in the permission settings for that app (then reboot). But, the newest version of the Google Movies and TV app does not request these permissions, so the "fix" for the previous version does not work.
If you want to use Google Movies and TV app, you can install the previous version (3.10.10) and allow the required permissions (then reboot) to get it working again.
I will not post the apk because people have varying ideas about installing apps that are not installed directly from the app store, but you can find the previous app on APK Mirror website.
Source Info
What I used to build CM13:
Please don't ask how to setup a build environment in this thread. There are plenty of guides that will instruct you how to setup a build environment for CM. I will not repeat those instructions, only give you the additional info required for building for our devices.
In addition to the full repo of CM13 sources, I used the following from my git:
lt01-common device tree
lt01wifi device tree
lt013g device tree
lt01lte device tree
smdk4x12 kernel source
proprietary vendor blobs
I also used from CM sources:
smdk4412-common device tree
Samsung Service Mode
Samsung Hardware
Will test on T311 2morrow. :thumbup:
Will test on the t310 as soon as I can I am especially anxious of the Bluetooth headset problem that was evident during 12.X (and other custom roms)
Edit: Tried it out. Bluetooth is still a bit messy for headsets. Unless I am very close (less than 2 meters) - so far.
Edit2: Welcome Back Gr8Nole - missed you (for Dev reasons)
Great job gr8nole. One problem that I encounter that is found on lollipop too is YouTube having lag. I really like to use it but in lollipop and marshmallow there's still problems. Still, thanks a lot for keeping this device up-to-date with the latest version of android. Thank you! ?☺?
luisoriera said:
Crear job gr8nole. Can you please fix YouTube
Click to expand...
Click to collapse
YouTube works for me. What problem are you having?
Sent from my SM-G920V using Tapatalk
He mean when watching videos on youtube for a long time it having lag
---------- Post added at 07:49 AM ---------- Previous post was at 07:00 AM ----------
Device cant detect sim card on sm t311 everthing else is perfect
Thanhtho96 said:
He mean when watching videos on youtube for a long time it having lag
---------- Post added at 07:49 AM ---------- Previous post was at 07:00 AM ----------
Device cant detect sim card on sm t311 everthing else is perfect
Click to expand...
Click to collapse
can it be just upgraded without wiping the data on cm 12.1.1? and were you able to get the sim get detected?
thanks
sandeep0048 said:
can it be just upgraded without wiping the data on cm 12.1.1? and were you able to get the sim get detected?
thanks
Click to expand...
Click to collapse
oh I had a clean flash
Thanhtho96 said:
oh I had a clean flash
Click to expand...
Click to collapse
What about sim card is it getting detected? Pls share ss...
Sent from my SM-T311 using XDA Forums
sandeep0048 said:
What about sim card is it getting detected? Pls share ss...
Sent from my SM-T311 using XDA Forums
Click to expand...
Click to collapse
I had clean flash and it cant detect my sim, Can you try flash over cm12.1 without wiping data?
Thanhtho96 said:
I had clean flash and it cant detect my sim, Can you try flash over cm12.1 without wiping data?
Click to expand...
Click to collapse
Let me chk.... Downloading it now....will report after sometime...?
Sent from my SM-T311 using XDA Forums
By that time can you please share few SS.. Would like to have a look..
In UI it's not changed so much, but it's working much faster than lollipop
Ya I love new open apps animation
marek_poland said:
In UI it's not changed so much, but it's working much faster than lollipopView attachment 3577095View attachment 3577096View attachment 3577092View attachment 3577093
Click to expand...
Click to collapse
Did you upgraded it or had a new fresh install?
Sent from my SM-T311 using XDA Forums
Fresh new, but I'm on T310. I made a factory reset in TWRP without format system. I was on CM12.1
Sent from my LG-D802 using Tapatalk
marek_poland said:
Fresh new, but I'm on T310. I made a factory reset in TWRP without format system. I was on CM12.1
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
Oh ok...so evrything is working fine right accept d video recording gps and youtube?
Sent from my SM-T311 using XDA Forums
I'm not using camera neither gps, but youtube works perfectly, no lags, no freeze
Just for info: screen cast still not working
Sent from my LG-D802 using Tapatalk
marek_poland said:
I'm not using camera neither gps, but youtube works perfectly, no lags, no freeze
Just for info: screen cast still not working
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
Oh ok....
Sent from my SM-T311 using XDA Forums
---------- Post added at 04:10 PM ---------- Previous post was at 03:26 PM ----------
Thanhtho96 said:
I had clean flash and it cant detect my sim, Can you try flash over cm12.1 without wiping data?
Click to expand...
Click to collapse
Ok... I installed without wiping data but sim issue is still the same...
Dint detect the sim.
Secondly i only have one mmc but its showing 2 diferent cards one is 5gb and another one shows 1.5gb n internal is different so altogether its showing 3 memories???... Gplay services crashes might b i have not installed or updated gapps.. Not sure. Bt d main issue is sim doesn't gets detected...
Sent from my SM-T311 using XDA Forums
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi all
CyanogenMod 12.1 is here for both Jiayu s3 (MT6752) and also the new Jiayu s3 + (MT6753)
Just open this thread, for Feedback & Changelogs ONLY
This is Made by Official Jiayu Germany
Rom contributors: DerTeufel1980 & superdragonpt & fire855
Huge thanks to CyanogenMod
Changelogs / Status : Jiayu S3 MT6752
Working Features
Dual SIM
Wifi
Bluetooth
Audio
Sensors
Camera
GPS
NFC
FMRadio
Special MTK Features : (i.e.: SmartWake, RadioFM)
Bugs :
3G/LTE only on SIM slot 1
You tell us
Builds:
Build 01 20160329
Changelog:
First Public build
Build 02 20160527
Changelog:
CyanogenMod sync from mainstream
New release 5.1.1 LMY49J
Android Security Patch level : May 2016 (latest branch)
Several MTK features; fixs & improvements
Changelogs / Status : Jiayu S3+ MT6753
Build 01 20160329
Working Features
Dual SIM
Wifi
Bluetooth
Audio
Sensors
Camera
GPS
NFC
Bugs :
FMRadio
3G/LTE only on SIM slot 1
You tell us
Nice
Gesendet von meinem JY-S3 mit Tapatalk
Great job!!!
Bug report: Sim number 2 cannot be switched off.
Email not allowing exchange?
Keep it up devs!!!!
Installation:
- Full wipes
Layout:
Its recommended that you are on Lollipop SPFlashTools Layout
Recommended Gapps:
- https://drive.google.com/file/d/0ByqU0leb2N6kU1Z6YjlpYWd6Z0E/view
FAQ:
Q: i have apps force closing after installing this ROM
( i.e.: RaboBank/ FaceBook/Speed test, etc)
A: Be sure to update webview via play store
Q: Where's my root?
A: CyanogenMod root can be activated on the Dev.Settings
Q: Where's the Mediatek Engineer Menu?
A: That's not part of CyanogenMod,but MTK specific application, we will add the most device & mtk specifics we can into CyanogenMod...
( For now: FM radio and Smartwake are already added)
Nice thread, I will post my story
webview update solve FC problems thanks a lot.
Installation:
Doing a complete factory reset from current rom
Starting in TWRP 3.0.0.0
Wiped everything, even did a format, wipe again, again again.
Copying CM12.1 + opengapps to internal sdcard
Flashing
wipe cache/dalvik
reboot
CM12.1 is starting
Optimizing 95 apps
Choose language, wifi, setting up google account, choosing "always Trebuchet"
Start
Mail is arriving
Playstore
looking for AD.nl (the app that was crashing yesterday), installing, opening...CRASH
Changing launcher to Google
Restarting phone
Clear app-data, clear app-cache
Open AD.nl....CRASH
Sorry, but it is not working
BUT....lightning fast, keep up the good work. Anything I can do to help fixing this?
Also Rabo Banking not working...unfortunately back to RC4
---------- Post added at 09:44 AM ---------- Previous post was at 09:36 AM ----------
hmmm, will check later today about webview. But strange..webview is not even installed in the RC's , and now in CM it should be a problem/fixer?
Can you explain that?
RalphMalph said:
Installation:
Doing a complete factory reset from current rom
Starting in TWRP 3.0.0.0
Wiped everything, even did a format, wipe again, again again.
Copying CM12.1 + opengapps to internal sdcard
Flashing
wipe cache/dalvik
reboot
CM12.1 is starting
Optimizing 95 apps
Choose language, wifi, setting up google account, choosing "always Trebuchet"
Start
Mail is arriving
Playstore
looking for AD.nl (the app that was crashing yesterday), installing, opening...CRASH
Changing launcher to Google
Restarting phone
Clear app-data, clear app-cache
Open AD.nl....CRASH
Sorry, but it is not working
BUT....lightning fast, keep up the good work. Anything I can do to help fixing this?
Also Rabo Banking not working...unfortunately back to RC4
---------- Post added at 09:44 AM ---------- Previous post was at 09:36 AM ----------
hmmm, will check later today about webview. But strange..webview is not even installed in the RC's , and now in CM it should be a problem/fixer?
Can you explain that?
Click to expand...
Click to collapse
for me after webview update all apps work fine. facebook cm browser and more
sokolataki said:
for me after webview update all apps work fine. facebook cm browser and more
Click to expand...
Click to collapse
Same. Once you update everything seems to work. @superdragonpt may i ask if you got new screen drivers on cm?
Sent from my S3 using Tapatalk
lolemenos said:
Same. Once you update everything seems to work. @superdragonpt may i ask if you got new screen drivers on cm?
Sent from my S3 using Tapatalk
Click to expand...
Click to collapse
Before re-installing everything, can you maybe test if "nu.nl" , "ad.nl" and "rabo bankieren" are working? Just normally from Google Playstore
---------- Post added at 10:01 AM ---------- Previous post was at 10:00 AM ----------
Ps. I didnt see fast-charging in CM12...correct? Or did I overlook it in all the hurry
Is there a way in CM to add to the status bar a network traffic? and also bigger type network icons? thank you
Sent from my S3 using XDA Free mobile app
Yes, webview problems. Now i can use apps normally.:good:
Nu.nl working
sokolataki said:
Nu.nl working
Click to expand...
Click to collapse
Thanks for testing, I appreciate that
If you set your notification light to a custom one, it not works, only the default color, red. and green, would be nice to implement it! The hw is capable of, because on early color os ports. the led could blink white and yellow.
Sent from my S3 using XDA Free mobile app
Why cant we have fast charge?
My tests
Hello, superdragonpt! First of all, thanks for your dedication on our device are my tests on this ROM. I suppose you only are interested in non-working functions and other issues. So, let's go:
Top apps than does not work properly: Facebook app (exits after login screen), Skype (same issue), Page Manager app (ramdon hangs), Aliexpress (does not open login screen), Asphalt 8 (loading screen and then exits with android process error). And still testing others. OK, webview update fixed it. Sorry
Automatic timezone by using network is wrong. I am in Spain (PEPEPHONE cell company - GMT+2) and it says China GMT+8.
Magnetic cover sensor does not work (or maybe CM ROM does not support it, I don't know, but RC does it).
Weather section on toolbar and cLock widget does not work.
Camera driver (photos and videos) looks like better than RC (or just I am suggested by the change). Anyway, quality level is still frustrating because of blurry pixel definition and scary postprocesing.
Compass has better accuracy than RC ROM, but still unaccurate (now looks like excess of effect when moving).
Missing MTK Engineer apk (please!) and fast charge feature.
I hope you find this list useful to improve CM ROM and make the best ROM over all . THANK YOU A LOT!
Could someone test WiFi AP - can 2nd and 3rd and so on device connect to Hotspot with turned on WPA2 security?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
AOSP is Android as Google release without other modifications, similar to Pixel/Nexus stock rom but without gapps.
Features such as Chop Chop, Double Twist and Ambient display gestures are kept.
Google does not release an AOSP Browser anymore since Marshmallow, thus there isn't a default browser. If I find the time I might port and revamp it in the future.
Installation
Requires Unlocked Bootloader & a custom recovery (at least twrp-osprey-3.1.1-r3.img or newer release is needed)
Place ROM & Gapps in your virtual SD
Reboot in Bootloader Mode
Go to "Recovery" (Vol +/Vol -) and confirm (power)
Wipe Data/Factory Reset
Wipe Dalvik cache
Install the ROM zip
DO NOT REBOOT
Install the Gapps zip (optional)
Reboot
Downloads
AndroidFileHost
Sources
Device Tree
Common Device Tree
Kernel
XDA:DevDB Information
The Android Open Source Project 8, ROM for the Moto G 2015
Contributors
Alberto97
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
Version Information
Status: No Longer Updated
Created 2017-11-23
Last Updated 2018-12-08
Changelog
07/12/2018
December security patches
WiFi display enabled
BT mac address fixed
BFQ is the default IO scheduler
Flip to Mute: the phone now vibrates when you mute/unmute it, just like Google's Flip to shhh
08/09/2018
September security patches
07/08/2018
August security patches
Enforcing SELinux
20/07/2018
RIL method getOperatorResponse now properly returns the operator and as result framework methods in TelephonyManger (getNetworkOperatorName + getSimOperatorName) and SubscriptionManager (getCarrierName + getDisplayName) now work correctly (thanks chil360 for pointing out the issue)
Whatsapp videos should have been fixed (thanks chil360 again for pointing out the issue and Subinsmani for linking the first fix here)
05/07/2018
July security patches
Camcorder has been fixed
Offline charging now correctly works
Moved from HWC2 to HWC1
Kernel updated to LA.BR.1.2.9.1-02310-8x16.0 tag
Unified gestures menus
Moved to AOSP apns list
Backuptool has been implemented
Added Google Sans
04/04/2018
April security patches
Better fix for the Alarm Clock
Removed PicoTTS (it was not working anyway)
Possibility of setting Pixel color accent
13/03/2018
February and March security patches
Open source Sensor HAL
Enabled Round Icons
Removed IMS support
04/01/2018
Android 8.1
January security patches
16/12/2017
December security patches
Alarm clock fixed
Fixed crash when opening Mobile Network settings with 2 sims inserted
IMS Patch by @althafvly included
21/11/2017 - Initial Release
If you are wondering, yes, this is based on lux stock nougat sources.
Alberto97 said:
If you are wondering, yes, this is based on lux stock nougat sources.
Click to expand...
Click to collapse
Wow.. cant wait to flash this :victory:
Wonderful. Cant wait to try.
Can u upload screenshot
Alberto97 said:
If you are wondering, yes, this is based on lux stock nougat sources.
Click to expand...
Click to collapse
Here is a quick review..
As I thought Exfat sdcards are not working
VOLTE is broken..
Can't access network setting's.. Giving FC
Camcorder is broken.. Works with footage..
The ROM is very clean & smooth..
Stay tuned for detailed reviews & screenshots
---------- Post added at 06:52 PM ---------- Previous post was at 06:39 PM ----------
Here are some screenshots https://imgur.com/a/xwmVc
---------- Post added at 06:52 PM ---------- Previous post was at 06:52 PM ----------
sargam44 said:
Can u upload screenshot
Click to expand...
Click to collapse
https://imgur.com/a/xwmVc
rahul9999 said:
Here is a quick review..
As I thought Exfat sdcards are not working
VOLTE is broken..
Can't access network setting's.. Giving FC
Camcorder is broken.. Works with footage..
The ROM is very clean & smooth..
Stay tuned for detailed reviews & screenshots
Click to expand...
Click to collapse
I won't add the support for ExFAT, if this becomes too much complicated I would end up in abandoning the project for sure.
Not sure what's wrong with VoLTE instead since I can't test it.
About the settings crash, try the attached patched APK (replace it in /system/priv-app/TeleService/), it works on addison, I never use two sim cards at the same time so I did not notice the issue before.
Congratulations, and thanks for your awesome work.
??
Cool
rahul9999 said:
Here is a quick review..
As I thought Exfat sdcards are not working
VOLTE is broken..
Can't access network setting's.. Giving FC
Camcorder is broken.. Works with footage..
The ROM is very clean & smooth..
Stay tuned for detailed reviews & screenshots
---------- Post added at 06:52 PM ---------- Previous post was at 06:39 PM ----------
Here are some screenshots https://imgur.com/a/xwmVc
---------- Post added at 06:52 PM ---------- Previous post was at 06:52 PM ----------
https://imgur.com/a/xwmVc
Click to expand...
Click to collapse
Did you test VoLTE with the patch? Also is it completely broken or the same like in LOS15?
Alberto97 said:
I won't add the support for ExFAT, if this becomes too much complicated I would end up in abandoning the project for sure.
Not sure what's wrong with VoLTE instead since I can't test it.
About the settings crash, try the attached patched APK (replace it in /system/priv-app/TeleService/), it works on addison, I never use two sim cards at the same time so I did not notice the issue before.
Click to expand...
Click to collapse
Attaching logs for VOLTE, Settings FC & Camcorder
1. For Volte I have restarted mobile & started recording logs.
Tried to call twice but call cloud not connected.. End up log
2. For network settings - started logs recording & tried to access network setting twice but got errors both time.. End up log
3. For camcorder - started built in camera & tried to record a video.. It shows video reordering but nothing will save in storage & gallery shows error file.. Second time tried to record video & got error.. End up log
I will try to use file which given by you.. Exfat is not a big issue for me, but i need a volte work.. Not sure how long I would test this.. Attaching logs in zip file..
samarth sathe said:
Did you test VoLTE with the patch? Also is it completely broken or the same like in LOS15?
Click to expand...
Click to collapse
Not tried any patch yet.. It's completely broken no single call you can make
@rahul9999 You have to reboot the phone in order to apply the patched APK
EDIT: About VoLTE, I'll try to see if I can switch back to the old Marshmallow stack but it will take time and I'll do it in another build for sure
Alberto97 said:
@rahul9999 You have to reboot the phone in order to apply the patched APK
EDIT: About VoLTE, I'll try to see if I can switch back to the old Marshmallow stack but it will take time and I'll do it in another build for sure
Click to expand...
Click to collapse
Edit - @Alberto97 that file worked & resolved Network setting FC bug . I have forgot to give it proper permissions.. now the only two things need to be fixed.. VoLTE & Camcorder
Alberto97 said:
I won't add the support for ExFAT, if this becomes too much complicated I would end up in abandoning the project for sure.
Not sure what's wrong with VoLTE instead since I can't test it.
About the settings crash, try the attached patched APK (replace it in /system/priv-app/TeleService/), it works on addison, I never use two sim cards at the same time so I did not notice the issue before.
Click to expand...
Click to collapse
its working in some roms like pixel experience. they used some other patches to fix the call failed issue. maybe it will help you to fix it
@Alberto97
EDIT : @rahul9999 reported its working after flashing my volte patch. Its from op3 oreo
Alberto97 said:
@rahul9999 You have to reboot the phone in order to apply the patched APK
EDIT: About VoLTE, I'll try to see if I can switch back to the old Marshmallow stack but it will take time and I'll do it in another build for sure
Click to expand...
Click to collapse
VoLTE is fixed after flashing patch made by @althafvly (attaching) also network setting fc fixed by you're file.. Now the only two things are need to be fixed.. Camcorder & Exfat sdcards (which is not possible)
althafvly said:
its working in some roms like pixel experience. they used some other patches to fix the call failed issue. maybe it will help you to fix it
@Alberto97
EDIT : @rahul9999 reported its working after flashing my volte patch. Its from op3 oreo
Click to expand...
Click to collapse
Thanks for the Great work @althafvly :victory:
rahul9999 said:
VoLTE is fixed after flashing patch made by @althafvly (attaching) also network setting fc fixed by you're file.. Now the only two things are need to be fixed.. Camcorder & Exfat sdcards (which is not possible)
Click to expand...
Click to collapse
Great Can you test if video calling works too?
samarth sathe said:
Great Can you test if video calling works too?
Click to expand...
Click to collapse
Will share detailed review tomorrow..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Resurrection Remix P
Code:
[SIZE="4"]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/SIZE]
Resurrection Remix the ROM has been based on LineageOS, SlimRoms, Omni and original Remix ROM builds, this creates an awesome
combination of performance, customization, power and the most new features, brought directly to your Device.
Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!
Special thanks to the LineageOS team, Omni team, SlimRoms and of course to all the supporters.
Make sure you have a custom recovery installed(TWRP is the preferred recovery)
Download the latest Resurrection Remix Rom & the latest GApps package
Boot into recovery
Perform a FULL factory wipe and wipe/system and dalvik cache as a precaution
Flash ResurrectionRemix Rom
Flash Google Apps package(Optional)
- If you are having issues flashing Google Apps (e.g Error 70) it means your system parition is too small and you'll need to flash the reparition tool below in TWRP to fix.
Repartition - Nexus 7 (2013) for FLO/DEB (16/32GB)
Flash Magisk Root(Optional)
First boot may take up to 10 minutes.
ROM Download (flo)
ROM Download (deb)
GApps
Resurrection Remix Source
Device Source (flo)
Device Source (deb)
Kernel Source
Vendor Source
XDA Developers
LineageOs Team
Omni Team
followmsi for trees
And Of Course To All The Supporters, Donators And Users
Same as the bugs in LineageOS 16.0
If you have a major bug to report that has not been reported already, please take the following steps to report it to us. It will save you, Team Resurrection Remix and me quite some time.
Download the MatLog app from the Play Store.
After downloading the MatLog app, go to the app settings, and change the log level to Debug.
Clear all previous logs and take the exact steps to produce the error you are receiving. As soon as you receive the error (probably a force close), go straight into MatLog and stop the log recording.
Copy and paste the entire log either to Hastebin or Pastebin
Save the log, and copy and paste the link into the thread with a brief description of the error.
Thank you for another pie rom i cant wait to download and flash
---------- Post added at 05:48 AM ---------- Previous post was at 04:54 AM ----------
just flashed the rom and unfortunately rr tools force closes when in animation section in rr tools in settings app so i wont be using this rom unfortunately but other than that its butter smooth
Any fix for this?
Wow! Now we have a lot of choice! RR is the must for roms!
JT1510365 said:
Thank you for another pie rom i cant wait to download and flash
---------- Post added at 05:48 AM ---------- Previous post was at 04:54 AM ----------
just flashed the rom and unfortunately rr tools force closes when in animation section in rr tools in settings app so i wont be using this rom unfortunately but other than that its butter smooth
Any fix for this?
Click to expand...
Click to collapse
Could you send a full log of when this happens, seems like second device I've heard this happens on, for now, you can try to switch layouts using the arrows on the top right
turbolukex5 said:
Could you send a full log of when this happens, seems like second device I've heard this happens on, for now, you can try to switch layouts using the arrows on the top right
Click to expand...
Click to collapse
This is a bug .. happens on all devices without flashlight.
RR-Team still needs to get informed to fix it properly.
As workaround - just edit this file ..
https://github.com/ResurrectionRemi...lob/pie/src/com/android/settings/rr/Misc.java
Remove 2 lines ..
https://github.com/ResurrectionRemi...pie/src/com/android/settings/rr/Misc.java#L69
https://github.com/ResurrectionRemi...pie/src/com/android/settings/rr/Misc.java#L70
Code:
diff --git a/src/com/android/settings/rr/Misc.java b/src/com/android/settings/rr/Misc.java
index 381592a..06853f9 100644
--- a/src/com/android/settings/rr/Misc.java
+++ b/src/com/android/settings/rr/Misc.java
@@ -66,8 +66,6 @@ public class Misc extends SettingsPreferenceFragment implements
ContentResolver resolver = getActivity().getContentResolver();
mFlashlightOnCall = (ListPreference) findPreference(FLASHLIGHT_ON_CALL);
- if (!RRUtils.deviceSupportsFlashLight(mContext))
- prefScreen.removePreference(mFlashlightOnCall);
}
Thanks for taking care of RR !
Cheers
followmsi said:
This is a bug .. happens on all devices without flashlight.
RR-Team still needs to get informed to fix it properly.
As workaround - just edit this file ..
https://github.com/ResurrectionRemi...lob/pie/src/com/android/settings/rr/Misc.java
Remove 2 lines ..
https://github.com/ResurrectionRemi...pie/src/com/android/settings/rr/Misc.java#L69
https://github.com/ResurrectionRemi...pie/src/com/android/settings/rr/Misc.java#L70
Thanks for taking care of RR !
Cheers
Click to expand...
Click to collapse
Thank you very much @followmsi
Updated 1st March build:-
- Used workaround which should fix RR tools from crashing.
wow wow wow. I can't believe that flo has so many pie.
turbolukex5 said:
Updated 1st March build:-
- Used workaround which should fix RR tools from crashing.
Click to expand...
Click to collapse
Wow! That was so fast that we got a fix
Downloading now and going to test and i will report back regardless if i find any issues or not and many thanks for your hard work
Also huge thank you for still developing and supporting for our device that is 5-6 years old at this point
New build released, now on the Official channel
Just installed on Nexus 7 (2013) LTE -- works as a charm, thanks a lot to the developers!
Edit: I tried to encrypt the phone but that didn't go well (bootloop, then twrp was failing to decrypt it even with the correct pattern) so I formatted data, wiped it all and did a clean RR7 install (back to unencrypted).
I've read on some threads that I should encrypt the phone from the stock version before flashing RR7. Would that work?
Edit 2: Nope, still doesn't work. Encryption worked (I'm with stock with encryption enabled) but twrp-3.2.3-1_UA is unable to decrypt it (Pattern failed, please try again!) so I can't flash RR7.
Looks like we can't have an encrypted RR7. Back to the full process again without encryption...
Auto rotate and weather customizations don't work
pacman00700 said:
Auto rotate and weather customizations don't work
Click to expand...
Click to collapse
Auto rotate and weather is working perfectly for me while using this rom so its not an issue. You should look up on youtube on how to fix the cable in your tablet to get auto rotate to work again you have a hardware issue
---------- Post added at 10:07 AM ---------- Previous post was at 10:06 AM ----------
$p00ky said:
Just installed on Nexus 7 (2013) LTE -- works as a charm, thanks a lot to the developers!
Edit: I tried to encrypt the phone but that didn't go well (bootloop, then twrp was failing to decrypt it even with the correct pattern) so I formatted data, wiped it all and did a clean RR7 install (back to unencrypted).
I've read on some threads that I should encrypt the phone from the stock version before flashing RR7. Would that work?
Edit 2: Nope, still doesn't work. Encryption worked (I'm with stock with encryption enabled) but twrp-3.2.3-1_UA is unable to decrypt it (Pattern failed, please try again!) so I can't flash RR7.
Looks like we can't have an encrypted RR7. Back to the full process again without encryption...
Click to expand...
Click to collapse
last time i checked this device is a tablet not a phone lol
pacman00700 said:
Auto rotate and weather customizations don't work
Click to expand...
Click to collapse
Make sure you enable weather service in miscellaneous
JT1510365 said:
Auto rotate and weather is working perfectly for me while using this rom so its not an issue. You should look up on youtube on how to fix the cable in your tablet to get auto rotate to work again you have a hardware issue
---------- Post added at 10:07 AM ---------- Previous post was at 10:06 AM ----------
Click to expand...
Click to collapse
turbolukex5 said:
Make sure you enable weather service in miscellaneous
Click to expand...
Click to collapse
Weather works for me after enabling the service in the settings, but not auto rotate (still need to use the Rotation Control app).
JT1510365 said:
last time i checked this device is a tablet not a phone lol
Click to expand...
Click to collapse
Well, it has a SIM card (so can make calls) and the same size as a Galaxy Note so nowadays that definition is debatable
$p00ky said:
Weather works for me after enabling the service in the settings, but not auto rotate (still need to use the Rotation Control app).
Well, it has a SIM card (so can make calls) and the same size as a Galaxy Note so nowadays that definition is debatable
Click to expand...
Click to collapse
rotation worked perfectly for me last time i used the rom i switched back to aicp 13.1 though but i do fully remember that auto rotate was not an issue with rr remix 7.0 when i tested it
---------- Post added at 11:40 PM ---------- Previous post was at 11:36 PM ----------
turbolukex5 said:
New build released, now on the Official channel
Click to expand...
Click to collapse
New build works like a charm. and the only bug i noticed besides the obvious ones like nfc and compass is lockscreen music visualizer does not show up in lock screen when the setting is turned on and music is playing. Other than that the rom is great
Thank you so much for this awesome rom i look forward to future updates
---------- Post added at 11:44 PM ---------- Previous post was at 11:40 PM ----------
dealpapa1 said:
wow wow wow. I can't believe that flo has so many pie.
Click to expand...
Click to collapse
i can't believe it either! Sometimes i think its just a dream but then i realize its reality! This device is 5-6 years old at this point in time and it amazes me that this tablet still gets development from time to time
I would love to have either crdroid pie on flo or havoc os pie on flo too we will have to wait and see if one day we will get those roms but i am grateful for the roms we have already
Great! Now we have official pie rom qwq
But the flashlight switch issue still exist
奶骑永不倒 said:
Great! Now we have official pie rom qwq
But the flashlight switch issue still exist
Click to expand...
Click to collapse
Nexus 7 2013 has LED that can be used as a flashlight ? I think this toggle can be removed
Sent from my whyred using XDA Labs
Very nice Rom is it possible to use otg and charge at same time? like timurs kernel
spartan117701 said:
Very nice Rom is it possible to use otg and charge at same time? like timurs kernel
Click to expand...
Click to collapse
Same kernel that lineage 16.0 uses.