Hi guys, I recently bought DZ09. And I'm pretty disappointed with it. I plan to only use it for notification mirroring and to show me who is calling me. Everything is perfect to do so, but I can't seem to make it stop answering calls using the watch unless I disconnect the Bluetooth first. Can only help me with this? Am I missing something?
Related
Hi All,
Has anyone experienced this:
Talking on the phone using a bluetooth hands free (Moto H500) and any kind of notification comes in (new txt msg, new voicemail, low battery, etc) the call switches from the headset to the handset. I only had this happen in the WM6 ROMS, but it has been in all the ROMS i have tried. Maybe there's a fix i missed somewhere, maybe it only happens to me... Any thoughs or suggestions would be greatly appreciated.
thanks
Ya, I have the same issue with the WM6 ROMS.
I think I solved it though. You have to set Voice Command to only announce notifications though the device speaker. That seems to have solved the (annoying) issue for me.
Thanks for the info GadgetGuy, I'll give that a try... I just prefer that the people around me not know I just got a new message or my battery is low... If I find anymore on that I'll post again.
Hello everyone!
What I'm looking to do is really simple, a LOT of people are interested in these feature, however, no one has a clear solution.
There has been a lot of post about this subject but they are most old post and there's nothing help full.
Here is the problem - whenever I'm talking over the phone, I can play any music I like and I can hear it perfectly, but the other side cant hear anything! even if ill let the music play using the phone speaker - the other side is silent (witch is strange cause when the speaker play, the mic should transfer the sound and shouldn't "care" who is making it).
So after a lot of searching for apps and different ways, I found out something interesting.. If I make the call using an VOIP (skype, viber and so on) and Ill play music at the same time - THE OTHER SIDE CAN HEAR IT PERFECTLY!!! witch means the phone is fully capable of doing it.
What is going wrong when I'm using the cellular network instead of VOIP? is there a way around it?
Ive noticed some people don't get WHY would I want to do it.. well, I'm working using my phone (sales) and using the exact same pitch. I would like to be super lazy and play a recorded version of me, and when its done, be able to just keep talking to the person without him being able to notice the difference.
Since I'm doing it for work, I cant use VOIP for regular calling since Ill lose the option to use "Airdroid".
I'm using Nexus 4, Slimkat rom (4.4.4).
ANY help at all will be appreciated
I have my S2 connected to my Nexus 6 via bluetooth. My S2 is the LTE version with T-mobile. When someone calls my cell, it rings on my Nexus as well as the S2. I'm ok with that. But if I answer the call on my Nexus, my S2 acts like a speaker phone. Don't like that. I want to be able to answer call on my nexus and use the nexus for the call or answer the call on my S2 and take the call on that. Is that possible?
Fron my understanding if you are using your watch on Bluetooth connection then the watch will act like a Bluetooth speaker if you answer a call on your phone. Only work around is to disconnect Bluetooth from your phone when you answer the call. Think of playing music thru a portable Bluetooth speaker and receiving a call while listening to music. You'd just disconnect Bluetooth from your phone to have a private convo.
Any help from HERE?
Yeah. I read that too. Not happy about it. Samsung needs to fix that issue. I had the urbane before s2. The s2 seems more of a work in process. Miss the integration of Android apps into the watch such as spotify.
Another reason Samsung needs to get rid of Tizen and only use Android Wear.
I have a Samsung Note 5 and don't have that problem. I can answer from either the phone or the watch on my S2 T-Mobile. If I had a non Sammy phone I would not be happy, hopefully they will fix in an update, or a Dev will put out a program to help. They advertise the watch as working with any Android 4.4 or above phone, they do not mention limitations if you are not on a Samsung phone.
I came up with a solution that fixes part of the problem. I use an app on my phone called Macrodroid. It's an automated task app. I created a macro that when I answer a call on my phone , it turns off bluetooth and vice versa when I hang up. So that works fine when I answer a call on my phone the call is not picked up by the S2. But when I answer the call on my S2, Macrodroid can't tell tell the difference that I'm answering the call on my S2 not the phone and turns off bluetooth. Not good!. There are more sophisticated macro apps out there, but I'm not that good with those. Maybe someone smarter than me can create one.
I also used Macrodroid to automatically call forward (and cancel forward) my cell phone to my watch when they are disconnected via bluetooth.
Go to settings, Bluetooth, and click the gear next to your watch. Uncheck phone audio. No problems now hopefully that's what you're looking for
paoloroeseke said:
Go to settings, Bluetooth, and click the gear next to your watch. Uncheck phone audio. No problems now hopefully that's what you're looking for
Click to expand...
Click to collapse
this solves the problem!
You dont want to use a macro to turn off bluetooth completely when a call comes in , especially if you use a Bluetooth headset with your phone..
I had forgotten where I'd seen this until now.
paoloroeseke said:
Go to settings, Bluetooth, and click the gear next to your watch. Uncheck phone audio. No problems now hopefully that's what you're looking for
Click to expand...
Click to collapse
I kept trying to find the "Phone Audio" setting on the watch's bluetooth settings, not the phone's. Doh!
crp
paoloroeseke said:
Go to settings, Bluetooth, and click the gear next to your watch. Uncheck phone audio. No problems now hopefully that's what you're looking for
Click to expand...
Click to collapse
Awesome! Been trying to figure that out for days!!!
hi,
i recently got a gear s3 classic, wifi and bt edition.
whenever i want to make a call from the watch its just erasing the numbers and doing nothing. also when im trying to call a contact, it's freezin for a few seconds and after its doing nothing. when i receive a call i can just decline it but not accept it. my bluetooth seems proberly connected, im getting notifications and similiar thing, also the gear app says im connected. using it with a oneplus2 on RR, android 7.1.2.
i hope someone got fix for this.
iLucas said:
hi,
i recently got a gear s3 classic, wifi and bt edition.
whenever i want to make a call from the watch its just erasing the numbers and doing nothing. also when im trying to call a contact, it's freezin for a few seconds and after its doing nothing. when i receive a call i can just decline it but not accept it. my bluetooth seems proberly connected, im getting notifications and similiar thing, also the gear app says im connected. using it with a oneplus2 on RR, android 7.1.2.
i hope someone got fix for this.
Click to expand...
Click to collapse
Do you have other devices paired to your phone? If so, you might experiment by UNpairing other devices (headphones, bt speakers, whatever) and then try again.
I've seen my go both ways. But I prefer it paired with my car so have tried to limit the bt pairing between my phone and the watch to notices and some data updates but NOT voice.
fred2546 said:
Do you have other devices paired to your phone? If so, you might experiment by UNpairing other devices (headphones, bt speakers, whatever) and then try again.
I've seen my go both ways. But I prefer it paired with my car so have tried to limit the bt pairing between my phone and the watch to notices and some data updates but NOT voice.
Click to expand...
Click to collapse
thanks for your answer. i've tried this, doesn't work. i've also reseted my watch already and reinstall all the samsung stuff. not working at all.
ive fixed the problem so far. its caused by the rom, if i use the oxygenos it's working
I can confirm that there are a few custom roms (7.1.2) which supports the calling functionality in OP2.
You don't really have to move back to the stock Oxygen OS. :good:
PureNexus
HalogenOS
AICP etc..
Does anyone else have this problem? I just got the Galaxy 4 smart watch (bluetooth, not lte version) a few days ago. When I initiate a call from the watch it dial and says "See phone" and the call is now coming through the phone. I can click a button on the phone to send the call back to the watch but obviously this defeats the convenience of not needing to have the phone in arms reach.
My husband figured out that its some kind of interference with other connected bluetooth devices (even though they are off), like my car and handsfree earpiece. If I unpair each of those items, calls work as they should. As soon as I re-pair another bluetooth device the problem resurfaces. I'd rather not have to pick one or the other to work if I can help it. Samsung support hasn't been able to fix it. Any ideas?
I should have clarified, I'm wondering both who does and who doesn't have this issue. Please comment even if yours works perfectly.
Samsung support seemed to suggest it was a software issue thar might be able to be fixed in a future update but I'm not sure if its an issue for anyone other than me.
Maybe you should take a look at this topic https://forum.xda-developers.com/t/...hange-default-behavior.4369423/#post-86031957