Important Information & Disclaimers
Purpose of thread:
This thread is opened in order to get feedback from flashing and testing the official CM13 releases (snapshots) & nightlies on the AT&T Galaxy S4 SGH-i337 (jflteatt) and the Candian Galaxy S4 SGH-i337m (jfltecan).
CyanogenMod Info:
CyanogenMod 13 (or CM13 for short) is a free, community built, aftermarket firmware distribution of Android 6.0.x (Marshmellow), which is designed to increase performance and reliability over stock Android for your device.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
The AT&T Galaxy S4 SGH-i337 (jflteatt) and the Candian Galaxy S4 SGH-i337m (jfltecan) had separate CM builds until CM11-Snapshot-M3, after which all Galaxy S4 variants were merged into a unified build (jflte). Due to the pain it was to maintain all those devices in one build, CM de-unified the Galaxy S4 line as of CM12.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. If you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Disclaimers/Warranty:
Like any other custom ROM installation, needless to say that this will void your warranty and possibly ruin or brick your device. You've been warned...
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Credits/Thanks:
invisiblek has done most of the work, with contributions from FarmGeek4Life. I am just allowing it to benefit those with AT&T & Canadian S4s by providing support where I can, and putting time into testing and debugging when I need to.
Note: Most of this I shamelessly copied from invisiblek's CM12 post on the Verizon Galaxy S4 forums, he's the expert.
Download Links & Installation
CyanogenMod:
Releases/Snapsots: http://download.cyanogenmod.org/?device=jflteatt&type=snapshot
Nightlies: http://download.cyanogenmod.org/?device=jflteatt&type=nightly
Google Apps:
Make sure to get the latest Google Apps from OpenGApps.
Installation limitations & instructions:
The CM13 builds linked above were built for the AT&T variant SGH-i337 (jflteatt). The Canadian variant SGH-i337m (jfltecan) doesn't have any official CM builds since the de-unification in CM12 (see 'CyanogenMod Info' above), but the AT&T variant SGH-i337 (jflteatt) builds should work on the Canadian variant SGH-i337m (jfltecan) since they're basically the exact same hardware (you'll need to work around the Status 7 error when you try to flash a jflteatt build on your jfltecan device by flashing a matching CWM or TWRP recovery for the jflteatt build that you want to flash, as explained on the CM forums).
You might not be able to use this ROM if you're not on certain bootloaders. I would recommend you be on either the UCUAMDB or UCUAMDL bootloader (run this in a terminal to find out: getprop ro.bootloader ).
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDAevDB Information
[ROM][Official][6.0x] CyanogenMod 13 CM13 ROM Releases & Nightlies for the AT&T Galaxy S4 SGH-i337 (jflteatt) & Canadian Galaxy S4 SGH-i337m (jfltecan)
Contributors
HyeProfile,FarmGeek4Life, invisiblek, dcd1182
Source Code: http://www.github.com/CyanogenMod
ROM OS Version: 6.0.x Marshmellow
ROM Kernel: Linux 3.4.x
Version Information
Status: Nightly
Created 2016-08-16
Last Updated 2016-09-11
Thanks! I'm currently running cm13 as jfltexx (Intl) on my Canadian i337m. Is there any advantage to switching to the jflteatt version?
when I try to flash the att version on TWRP it says it's not a jfltecan version and therefore cannot continue.
I have a rooted i337m on CM 12 with bootloader I337MVLUFNE1
My understanding is that to use CM 13 I will need to do the following:
1. Install the UCUAMDB or UCUAMDL bootloader
2. Flash the version of recovery that corresponds to the cm13 version I wish to use
3. Backup, wipe, flash CM13 ROM and GApps
I have no idea how to do steps 1 and 2. I've never messed with the bootloader and can't seem to get twrp manager to flash a .img file.
Help please!
GeneralVeers said:
I have a rooted i337m on CM 12 with bootloader I337MVLUFNE1
My understanding is that to use CM 13 I will need to do the following:
1. Install the UCUAMDB or UCUAMDL bootloader
2. Flash the version of recovery that corresponds to the cm13 version I wish to use
3. Backup, wipe, flash CM13 ROM and GApps
I have no idea how to do steps 1 and 2. I've never messed with the bootloader and can't seem to get twrp manager to flash a .img file.
Help please!
Click to expand...
Click to collapse
Where did learn these? Does this apply to a phone running CM 11?
openletter said:
Where did learn these? Does this apply to a phone running CM 11?
Click to expand...
Click to collapse
After making that post, I did eventually get CM13 on my i337m.
As far as I can tell, all you need is an unlocked bootloader that will allow you to flash roms. If your phone is rooted and you can flash roms, then whatever bootloader you have is good enough.
You do need to have a version of recovery that corresponds to the CM13 rom that you want to flash. If you have an i337m, chances are you have a jfltecan recovery - there is no jfltecan CM13, so you need to change recoveries. If you want to flash the jfltexx CM13, you need jfltexx recovery. If you want jflteatt CM13, you need the jflteatt recovery.
You should be able to change your recovery by changing your phone model in TWRP Manager and using it to reinstall recovery - for some reason this kept failing for me so I stopped trying TWRP Manager and installed an app call Rashr. I set my phone model in Rashr to jfltexx, which allowed me to install the jfltexx recovery. After doing this, I was able to flash the jfltexx CM13 from recovery.
Which One should I flash Nightlies or Snapsot?? plz help asap
hey i cant seem to install cm13. I re-flashed twrp att version and it still says the error is there? how should i fix this?
How does this work with the at&t variant of the galaxy s4? Isn't the bootloader locked so you shouldn't be able to have TWRP?
Hello, I bought an AT&T s4 i337 and I want to install this ROM someone explains step by step that I must install first, I am something new. Has its original firmware (4.4.2 KK)
Ra3zor0 said:
How does this work with the at&t variant of the galaxy s4? Isn't the bootloader locked so you shouldn't be able to have TWRP?
Click to expand...
Click to collapse
GerardBet4 said:
Hello, I bought an AT&T s4 i337 and I want to install this ROM someone explains step by step that I must install first, I am something new. Has its original firmware (4.4.2 KK)
Click to expand...
Click to collapse
+1 bump same problem
Can someone with the latest zips rehost them and link?
Links please for JTLTECAN Thanks
Ohhdayumm said:
hey i cant seem to install cm13. I re-flashed twrp att version and it still says the error is there? how should i fix this?
Click to expand...
Click to collapse
You need to be on the MDL or MDB bootloader for it to work. Once you've upgraded past 4.2.2 jelly bean, you're stuck using safe strap recovery.
---------- Post added at 06:36 PM ---------- Previous post was at 06:32 PM ----------
Ra3zor0 said:
How does this work with the at&t variant of the galaxy s4? Isn't the bootloader locked so you shouldn't be able to have TWRP?
Click to expand...
Click to collapse
Yep the bootloader is locked and cannot use TWRP. However, if you're on the MDL or MDB bootloader then you can use Loki to bypass the lock and thus can then use TWRP.
---------- Post added at 06:40 PM ---------- Previous post was at 06:36 PM ----------
GerardBet4 said:
Hello, I bought an AT&T s4 i337 and I want to install this ROM someone explains step by step that I must install first, I am something new. Has its original firmware (4.4.2 KK)
Click to expand...
Click to collapse
You can't. Once you've updated past jelly bean 4.2.2 then you're stuck using safe strap and can only boot touch wiz based ROMs.
The links for download are no longer working.
Related
OmniROM
Android 4.4.4
for Samsung Galaxy Tab 3 8.0
Unofficial Builds by Android-Andi
I used @sevenup30 ´s Omni-Thread as base for this Thread!
What is Omnirom?
A new Android custom rom has been announced at the BABBQ (Big Android BBQ) by @XpLoDWilD, @Chainfire, @Dees_Troy & Team. For more information go to omnirom's website
I used @ketut.kumajaya ´s CM 11 source as base for my Setup!
Big thanks to him! Also Take a look on the Credits!
I don´t own a Tab 3 - i can not test if the Rom works! Use on your own risk!
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* If you dont like this rom, Stay away from this thread!
*/
WHAT IS NOT WORKING?
Same as in CM11 - maybe more or less
Screenrecorder not working
You will tell me more
How To Flash:
For Android 4.4.X:
Make sure you're running latest PhilZ Touch unofficial repack from NEXT kernel thread
You´ll find it here: http://forum.xda-developers.com/showpost.php?p=47342530&postcount=2
Download the Rom for your device and copy to your Tablet
Reboot into Recovery
Wipe Data Factory Reset
format /system
(Recommend, but make sure you placed your files on your MicroSD Card! your internal storage get formatted!)
format /data (better "format /data and /data/media")
reboot your recovery once
flash Rom
flash 4.4.x GApps
flash SuperSu from Cainfire (if you need root)
At first boot, you must skip all settings and go to Settings / language & input / default input / and disable hardware keyboard
1. General Information (this Post)
2. Downloads
3 .Credits and Sources
XDA:DevDB Information
[SM-T31X] Omni Rom , ROM for the Samsung Galaxy Tab 3
Contributors
Android-Andi, ketut.kumajaya
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
Version Information
Status: Beta
Created 2014-07-27
Last Updated 2015-08-03
Downloads:
All Files on www.androidfilehost.com
SuperSU http://download.chainfire.eu/supersu
GApps by @Deltadroid http://forum.xda-developers.com/android/software/app-minimal-gapps-gapps-lp-20150107-1-t2997368
Credits & Sources
Device specific sources i used
- Kernel: https://github.com/kumajaya/android_kernel_samsung_smdk4x12
- Common T31x device fork: https://github.com/andi34/android_device_samsung_lt01-common
- SM-T311 fork: https://github.com/andi34/android_device_samsung_lt013g
- SM-T310 fork: https://github.com/andi34/android_device_samsung_lt01wifi
- SM-T315 fork: https://github.com/andi34/android_device_samsung_lt01lte
Credits
- CyanogenMod Team, CyanogenMod and AOSP contributors
- Omni-Rom Team and all contributors
- @codeworkx, CyanogenMod for Samsung Galaxy Note 2 (GT-N7100 and N7105) maintainer
- @sbrissen, CyanogenMod for Samsung Galaxy Tab 8 (GT-N5100) maintainer
- @ketut.kumajaya for his Sources and all his help
- @gr8nole
- @XpLoDWilD
- @Chainfire
- @Dees_Troy
- @daavvis
- @CodyF86
Added Code Review wich not got merged yet
Code:
[B][U][WIP] Multi-window[/U][/B]
This is a big work in progress, which currently has some bugs,
but begins to look okay.
You can already multitask a little bit, by using the
app switcher and long-pressing an icon, then select "Add to
Split View".
Last window touched gets the key focus.
https://gerrit.omnirom.org/#/c/1510/
i am sure you will post some screenshots to be placed here
@ketut.kumajaya i am uploading Omni 4.4.2 Testbuild for SM-T311 right now... will be available in ~ 10 minutes.
For SM-T310 building right now... wil be up after sleep...
For SM-T315 i will build in 1 Week (but 4.3.1 Testbuild available )
Edit:
For SM-T311 uploaded
@Android-Andi Out of Thanks for today but big thanks from me and this community :good:
EDIT: @Android-Andi I got 6500 Thanks, the last from you :laugh:
Whomever tests this out, can you give us a rundown of 'WHAT IS NOT WORKING? Same as in CM11 - maybe more' ?
GPS?
Cameras?
Wi-Fi?
curiousmike said:
Whomever tests this out, can you give us a rundown of 'WHAT IS NOT WORKING? Same as in CM11 - maybe more' ?
GPS?
Cameras?
Wi-Fi?
Click to expand...
Click to collapse
Don't ask but tell him :laugh:
@Android-Andi I can't test 4.4 build today, as I told you before
No propblem @ketut.kumajaya, take your time - i don´t have time to rebuild until end of this year
Omni 4.4.2 for SM-T311 uploaded too
Just tried to install it on my T315, from TouchWiz Recovery. Wiped all, then tried install.
It says, failed. Checking some builprops it first seems to throw the 315 number, then a little later it show the 311 number and fails.
I wish I knew more about linux But the zip wont install.
omni-4.3.1-20131223-lt01lte-HOMEMADE.zip
You need a Custom-Recovery - Stock-Recovery won´t work.
Or do you mean TeamWin Recovery (Project) (TWRP)?
Therefor you need at least TWRP 2.6.3.0 with KitKat-Support.
For now:
You need at least CWM 6.0.4.4 or a Recovery based on CWM 6.0.4.4 or 6.0.4.5 to flash Kitkat Roms.
Please use PhilZ Touch Blackhawk Repack from @ketut.kumajaya, it is based on CWM 6.0.4.5.
You will find a it as flashable zip here. http://forum.xda-developers.com/showpost.php?p=47342530&postcount=2
If you are on Stock-Recovery:
Maybe ketut can upload the recovery as Odin flashable tar.md5, else you need convert it using this tool on windows (you can convert on linux too) or first flash CWM from here: http://forum.xda-developers.com/showthread.php?t=2385539
How to flash it using Odin?
Flash the recovery.tar.md5 as PDA in Odin,
make sure Re.-Partition UNCHECKED,
More Information? Please ask in the Recovery Thread
Ok thnx, I was/am on TouchWIN 2.6.0.0
I;ll see if I can upgrade that to 2.6.3. Then try again.
Rather not mess with my TWRP as it is my friend till, and beyond the end.
I dare mess up a lot, except the recovery and my backups..
Please use PhilZ Touch recovery especially for your device, the only unofficial recovery strictly follow device assert rule.
@Android-Andi I just started working on Omni branch android-4.4, for better Omni experience :good:
Thanks @ketut.kumajaya, i have seen your changes.
Do you re-setup for the 2 other too?
Got error when trying to install on t310
Sent from my Incredible 4G LTE
Please download and flash philz_touch_6.00.8-t310-blackhawk-next.zip in your current recovery.
Reboot Recovery.
Try again to flash the Rom.
Android-Andi said:
Thanks @ketut.kumajaya, i have seen your changes.
Do you re-setup for the 2 other too?
Click to expand...
Click to collapse
Yes and I will commit a change to fix libsensorservice.so loading error as reported by gr8nole.
Android-Andi said:
Please download and flash philz_touch_6.00.8-t310-blackhawk-next.zip in your current recovery.
Reboot Recovery.
Try again to flash the Rom.
Click to expand...
Click to collapse
Followed instructions very well when installing. No go.
Sent from my SM-T310 using Tapatalk
Is this rom support for dual boot? cause Got error "set metadata recursive (status 7) when flashing this ROM with secondary Philz Touch recovery..
my device is T311 with blackhawk kernel 0.5
I tried the recovery and nothing status 7 all day t310 latest PHILZ recovery not sure I flashed 4.3 and CM no prob not sure.
Sent from my SM-T310 using XDA Premium 4 mobile app
I tried to download Android 5.1 factory image from Google and found out there was none.
So I built one, for testing.
This is a user build of Android 5.1 AOSP with 5.0.1 blobs, so do not expect this to be rock stable.
Gapps for Android 5.1 also missing, you may have trouble getting Play Store to work.
Flash at your own RISK!
1. Download the ROM (XDA DevDB) and extract.
2. Reboot to bootloader
2.1. Unlock bootloader
3. 'fastboot -w'
[THIS WILL WIPE ALL DATA ON THE DEVICE]
4. 'fastboot flash boot boot.img'
5. 'fastboot flash system system.img'
6. Reboot
XDA:DevDB Information
[FLO] [UNOFFICIAL] [DEV] Android 5.1 AOSP for Nexus 7 (2013), ROM for the Nexus 7 (2013)
Contributors
arter97
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Testing
Created 2015-03-12
Last Updated 2015-03-12
Reserved
Awesome, seems to boot. But no google apps.
Edit: Hurrr, didnt see the post listing that. Still pretty good so far.
edit2: did flash this, seemed to work
http://forum.xda-developers.com/android/software/gapps-google-apps-minimal-edition-t2943330
first impressions from setting up and installing all the apps i had on before hand i can really tell its smother, this is what android 5.0 should have been...
thank you arter for building this, it means i dont have to
The 5.1 binaries for this device arn't out yet are they?
Does anyone have an idea if the 5.0.2 Nexus 7 (flo) binaries will compile and work with the Android AOSP 5.1 source ?
Thanks!
iwebsource said:
The 5.1 binaries for this device arn't out yet are they?
Does anyone have an idea if the 5.0.2 Nexus 7 (flo) binaries will compile and work with the Android AOSP 5.1 source ?
Thanks!
Click to expand...
Click to collapse
They work just fine. I've been running 5.1 on my flo for a couple days.
I'm surprising there's a lack of posts on this since everyone seems to want 5.1. I guess people are either waiting for the stock OTA or CM. I'm fine with keeping my tablet stock and this will do nicely.
tiny4579 said:
I'm surprising there's a lack of posts on this since everyone seems to want 5.1. I guess people are either waiting for the stock OTA or CM. I'm fine with keeping my tablet stock and this will do nicely.
Click to expand...
Click to collapse
Some users after clean ROM being dead are reverted to the first near stock choice they saw that was the grogg's ROM.
Since the post is pure stock I don't know shy
I have both Roms running both running great!
I am not comparing any Roms here or trying to discourage anybody,just saying...
Sorry if I did posted anything wrong!
•Hit thanks if I helped you..
Can I simply install this over clean rom? Thanks!
grukko said:
Can I simply install this over clean rom? Thanks!
Click to expand...
Click to collapse
Maybe you can but a clean wile is always recommended.Do a backup first.
And you can use Titanium Backup for backing up all things .
•Hit thanks if I helped you..
This is crDroid for Sony Xperia M2 (Eagle D2303)
crDroid build will always mainly based on CyanogenMod with some extra and few features (Cool and useful)
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Code:
IMPORTANT: Make sure you have an unlock Bootloader
Code:
WORKING
- CM Repositories
BUGS
- Same from CM
Code:
CREDITS
CM Rom
Slim Rom
Omni Rom
Many More.....
XDA:DevDB Information
crDroid Android, ROM for the Sony Xperia M2
Contributors
davidteri91
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Alpha
Created 2015-06-22
Last Updated 2015-06-22
Enjoy to Our Site on Google Plus
Download
Help us with Translations
Donate to Maintain our build server
Demo Video
Download Gapps For Lollipop
No News
Thank you! (Grazie Davide!!)
I guess it also have the GPIO issue
NoobZik said:
I guess it also have the GPIO issue
Click to expand...
Click to collapse
Well bug list is the same as CM
Sent from my D2303 using XDA Free mobile app
Dual sim support is added or not?
is this work for d2302
camera working or not???
sai teja badri said:
is this work for d2302
camera working or not???
Click to expand...
Click to collapse
Camera does not work in CM and since bugs are the same as in CM... You can guess
Work it on D2403? And what are the same isses?
Sent from my D2403 using XDA Free mobile app
Where from
Which rom stock from ? 4.4.4 or 4.4.2 .
And what use recovery
This rom is not Rom Stock based. It is build from AOSP and CM sources. And it's Lollipop 5.1.1 not kitkat as mentioned to the Thread subject
It have to be flashed through CM Recovery (A permanent recovery)
NoobZik said:
This rom is not Rom Stock based. It is build from AOSP and CM sources. And it's Lollipop 5.1.1 not kitkat as mentioned to the Thread subject
It have to be flashed through CM Recovery (A permanent recovery)
Click to expand...
Click to collapse
Sorry about my English.
Rom which it has to be installed and then install this rom ?
And what it has several recovery recover for this unit.
---------- Post added at 09:34 AM ---------- Previous post was at 09:12 AM ----------
wesleylpdf said:
Sorry about my English.
Rom which it has to be installed and then install this rom ?
And what it has several recovery recover for this unit.
Click to expand...
Click to collapse
I tried the stock rom 4.4.4 and 4.4.2 .
And recovery philz Recovery Touch, CWM Doomlord , KK 4.4.2 kernel with CWM ... All in vain .
Clean and did the form and factory reset .
I install ommini roms , Z4 Experience, successfully crystalpa . But the ROM Crdroid was unsuccessful.
Where is the error to install Crdroid ? I want to test this rom ..
Those recovery that you have mentioned will not work !
There is no specific rom required to install cr and CM12.
Please read those following thread
http://forum.xda-developers.com/xperia-m2/general/bootloader-devices-real-recovery-t3096833
http://forum.xda-developers.com/showpost.php?p=60491376&postcount=837
does work on d2302???
The bug list is the same as CM12.1 so this rom only works for D2303
Can I try on D2305 single SIM?
New build available (D2303)
Inviato dal mio Xperia Z3 utilizzando Tapatalk
davidteri91 said:
New build available (D2303)
the first one didnt work for me, let's see this one (will leave another comment in 20-30mins)...is the reason that different versions of 2303 exist? FXP's CM12.1 doesnt work, too?
nope...the same
after flashing, the screen stays black (doesnt even show a logo) although the phone keeps warm as if it works something...
first try was after stock 4.4.4 & TWRP...nothing
then I flashed TA from Sony Emma, flashed CM recovery, flashed your ROM from CM recovery and nothing again
Click to expand...
Click to collapse
quake73 said:
davidteri91 said:
New build available (D2303)
the first one didnt work for me, let's see this one (will leave another comment in 20-30mins)...is the reason that different versions of 2303 exist? FXP's CM12.1 doesnt work, too?
nope...the same
after flashing, the screen stays black (doesnt even show a logo) although the phone keeps warm as if it works something...
first try was after stock 4.4.4 & TWRP...nothing
then I flashed TA from Sony Emma, flashed CM recovery, flashed your ROM from CM recovery and nothing again
Click to expand...
Click to collapse
Same problem here!! D2306
Click to expand...
Click to collapse
There is an unofficial cm14 kltevzw build by haggertk out now so this guide is deprecated here is the link to g900v cm14
https://www.androidfilehost.com/?fid=312978532265362633
this guide will show you how to flash cm14 nougat on the kltevzw
much thanks to haggertk the developer of this rom i take no credit for this rom i only want to share nougat cm14 with kltevzw users if the developer doesn't like this thread it will get removed
this guide will show you how to flash cm14 nougat on the kltevzw
this thread is only for s5 verizon bootloader unlocked rooted devices thanks haggertk developer of cm14 for klte
please please take a twrp full backup or cwm full backup of your device before you follow this guide just in case
here is the link for cm14 nougat klte use this build
https://androidfilehost.com/?w=file...b9c45392c943d9d1da20861985400ca665d94569e62b8
nougat gapps link http://opengapps.org/[/url
go to sa...
https://www.youtube.com/watch?v=v6MG2UJxySA
Nougat 14
Hey
Thanks for your work!! I have downloaded and extracted everything.
Renamed it and extracted tar too.. moved everything to my phone and
Im about to start. BUT i want to ask first why flash the firmware first.
Im running a rooted unlocked S5 SM-G900V straight talk,, SM-S902L firmware.
if I flash the G900F firm I think im gonna mess my phone up.
what do you think ,,,
BobO
Do you mean sm-920l
Sent from my SM-G900F using Tapatalk
There is an unofficial cm14 kltevzw build by haggertk out now so this guide is deprecated here is the link to g900v cm14
https://www.androidfilehost.com/?fid=312978532265362633
Sent from my SM-G900F using Tapatalk
new? its missing
Hello guys, I was following the T805 Galaxy Tab S 10.5 LTE LineageOS 14.1 guide and the guide has links for: Kernel Zip and Device Tree Zip, but they are not included in the "instructions/guide/how-to" section. Are these supposed to be installed as well? If not, why are they there for download, when the instructions clearly state to download all of the Zips.
Installs done so far post-root/unlocking bootloader in TWRP:
-LineageOS 14.1
-Gapps addon
-LineageOS addonSU
Should I consider the custom ROM flashing complete, or am I lacking some steps yet?
Well, you are pretty much done. Other than those zips can be flashed post-setup.
HippoInWindow said:
Well, you are pretty much done. Other than those zips can be flashed post-setup.
Click to expand...
Click to collapse
Could you tell me the importance of the Kernel and Device Tree zip files? Are there benefits of flashing these? Also the Kernel has a version 15.0 and 14.1 variant, is the 15.0 variant viable with the 14.1 OS? Does the order of the flash matter?
Well you need to flash the kernel after the rom, and the 15.1 version should not be compatible since it’s meant for a different version LineageOS.
HippoInWindow said:
Well you need to flash the kernel after the rom, and the 15.1 version should not be compatible since it’s meant for a different version LineageOS.
Click to expand...
Click to collapse
The Kernel pre-installed with the ROM seems to be from 2018, whereas the 14.1 LineageOS kernel for Exynos was from 2017, anyone got input on this?