[ROM] [6.0.1] Unofficial Paranoid Android - Jiayu S3 Plus - JiaYu S3 ROMs, Kernels, Recoveries, & Other Develo

Paranoid Android is a free, community built distribution of Android 6.0.1 (Marshmallow) which greatly extends the capabilities of your phone.
This is the unofficial Build of Paranoid Android MM for Jiayu S3 plus (not advanced or basic), with mt6753 soc
​
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Installation Instructions:
Download ROM from here: https://www.facebook.com/MediatekAndroidDevelopers/
OR from xda DevDB
Download Gapps from Banks Gapps: http://download.dirtyunicorns.com/files/gapps/Banks/
Boot to recovery
Wipe data if you are not coming from Paranoid Android already
Install rom and gapps
Reboot
XDA:DevDB Information
Paranoid Android for S3 Plus, ROM for all devices (see above for details)
Contributors
fire855, superdragonpt, DerTeufel1980
Source Code: https://github.com/MediatekAndroidDevelopers
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Android 5.x.y installed, custom recovery installed
Version Information
Status: Stable
Created 2016-07-26
Last Updated 2016-07-26
XDA:DevDB Information
[ROM] [6.0.1] Unofficial Paranoid Android - Jiayu S3 Plus, ROM for the JiaYu S3
Contributors
fire855
ROM OS Version: 2.3.x Gingerbread
Version Information
Status: Testing
Created 2018-03-09
Last Updated 2018-03-09

Changelog / Patch's
Changelog:
Build 2: 20160814
fixed Bluetooth connection
fixed Wifi drops
added option to select 2.4 or 5Ghz Wifi frequency to advanced wifi options
fixed operator network search
fixed device encryption
all updates from AOSPA (incl. security updates)

Minimal F.A.Q
Q: After ROM boot up, I'm getting SetUP wizard errors / other Gapps FC / Black screen on first boot, why ?
A: On marshmallow based Roms, you need to flash ROM and gapps at the same time
TWRP even allows you to flash multiple .zip files
Q: Why no Mediatek Engineering Menu?
A: Its Mediatek proprietary, ugly , not needed on our builds.
Relevant features used on Mediatek E. Menu have been ported to our builds already using aosp / our implementations ( Sensors calibration , Band Mode, etc)
Q: Do we get The Fast Charge you guys made on Lollipop RC's ?
A: Yes, Fast Charge implementation was implemented on our MM builds
Q: App "x" is not working, why?
A: First make sure the app works under Marshmallow
Q: Something wrong with my Bluetooth, can't connect /pair with my "x" device , car-BT
A: Bluetooth should be backwards compatible , some OEMs don't also follow some guidelines , surely can be improved.
Post your BT model, Car model and year to help us out determining compatibility issues

ParanoidAndroid is back! With great device. Thank you.

Excellent work as always!

Rom is up on Xda DevDB also
have funn

Just flash from twrp or spflashtools?
Sent from my JY-S3 using Tapatalk

nggies said:
Just flash from twrp or spflashtools?
Sent from my JY-S3 using Tapatalk
Click to expand...
Click to collapse
TWRP

fire855 said:
TWRP
Click to expand...
Click to collapse
Thanks for your clue and support for our device...
Sent from my JY-S3 using Tapatalk

nggies said:
Thanks for your clue and support for our device...
Sent from my JY-S3 using Tapatalk
Click to expand...
Click to collapse
This is for S3Plus man, you have the S3 MT6752 right?

genesisalgor said:
This is for S3Plus man, you have the S3 MT6752 right?
Click to expand...
Click to collapse
Yeah.. I have Mt6752, too many miracle today makes me confused. But still same procedure installation. [emoji2]
Sent from my s3 using Tapatalk

Tried AOSPA on Jiayu S3 Plus and it works like a charm. It feels amazing that the gyroscope problem is finally fixed and that we have fast charging available
Sincere gratitude to all the devs!

*wrong thread

Battery is having a strange behavior after installing this rom on S3 Plus. It charges only to around 85% and doesn't go above that.

Latest twrp recovery, compiled from source:
https://www.androidfilehost.com/?fid=24591000424954599
- fix: mounting adoptable storage
- fix: mounting encrypted devices
The M.A.D. Team

AOSPA update released: https://www.facebook.com/MediatekAndroidDevelopers/
Changelog:
- fixed Bluetooth connection
- fixed Wifi drops
- added option to select 2.4 or 5Ghz Wifi frequency to advanced wifi options
- fixed operator network search
- fixed device encryption
- all updates from AOSPA (incl. security updates)

Rom build is now also available to download on xda DevDB
cheers

not sure if im the only one , but unable to flash latest version pa_s3plus_n560a-6.0.3-20160814.zip (downloaded from xda)
- on latest fire855 twrp 3.0.2
wipe to install new rom
rom starts installing but gets stuck around 4/5 of the bar for over an hour
managed to flash CM13 though.

Thanks for developing roms for this phone.
Does anyone know if this rom face the same problems as CM13? (GPU problem. no hardware acceleration, problem with videos in html5 720p, 1080p and so on)?

Related

[ROM] [UNOFFICIAL] [STABLE] [MI4/LTE] ParanoidAndroid | AOSPAL 5.1 |

Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Hi. I build the AOSPAL for Xiaomi Mi4(LTE)
This version is UNOFFICIAL,but It's stable on my test.
About change log, I only write what I add or delete .the rest is same as PA's official release.
Installation instructions
Code:
1. Make a Nandoid Backup before all !
2. Be rooted
3. Have a custom recovery installed
4. Have flashed the Extended Partition Zip
5. Download the ROM
6. Download gapps (recommended: TK GApps ones)
7. Reboot into recovery and perform a full wipe (for the first installation. Dirty flash should work for updates)
8. Flash the ROM
9. Flash the gapps
11. Reboot and enjoy ! The first boot is longer than the others
Changelog
Code:
Add LockClock widget from CM
Add Supersu (thanks AICP)
Add LTE option for Mi4 LTE
Remove ParanoidAndroidOTA ( UNOFFICIAL doesn't need this)
Translate some strings to Chinese :cyclops:
Sync with PA's update
XDA:DevDB Information
ParanoidAndroid, ROM for the Xiaomi Mi 4
Contributors
P013onEr
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2015-07-23
Created 2015-07-23
Last Updated 2015-07-23
Sources:
https://github.com/P013onEr
Download link:
ROM : https://www.androidfilehost.com/?w=files&flid=35765 (last uploaded one recommended)
GApps : http://forum.xda-developers.com/android/software/tk-gapps-t3116347
Thanks to:
Bitti09 and BaNks for providing their device and vendor trees
audahadi and TeamHorizon for the Kernel
SynnyG (Official cancro Maintainer)
CM
AICP
I dont if I should ask here, but do I need to re-partition the stock partitions as its needed for CM12? Thanks for your work.
please, upload some screenshots for this ROM.
Does this ROM have sweep2wake function in kernel ?
How about battery consumption ?
Thanks!
Let's try it shall we
any experience with this? Anyone like to share?
Unfortunately Setting has stop
Error show up, when clicked on battery icon in notification and in setting in battery option.
Every thing else is working fine.Just the first day of use,
Any fix for this the error and thank you for the rom
Excuse me for the question that may seem a bit absurd, but is there any problem in using this blunt in a 3G terminal?
In this rom work ir blaster of mi4, and FM?
just wanted to ask for below three things if it works i wonna try this out
plz let me know
IR blaster
camera
FM
http://www.androidauthority.com/paranoid-android-calling-it-quits-648429/
Paranoid Android is dead, probably not worth trying anymore.
Hi! this ROM dont will have more updates ???
murcianista said:
Hi! this ROM dont will have more updates ???
Click to expand...
Click to collapse
Would you mind reading the post above you??
diongdyh said:
Would you mind reading the post above you?
Click to expand...
Click to collapse
oh!! thanks! sorry!
whats a pity !
After first boot,the data works but when I switch it off once and then switch on,it doesnt work neither in 2G nor 3G mode even after rebooting multiple times.Had to reinstall rom but same thing happens again.Whats wrong?
Here Maps Offline Working ?
Can someone check if Here Maps Offline is working and the GPS is locking properly ? It would be very helpful

[ROM][5.1.1_r26][UNOFFICIAL]Temasek cm12.1 build for ferrari

Introduction
Temasek is based on Cyanogen Mod rom ,and added more feature than Cyanogen Mod
DISCLAIMER
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, or dead SD cards,
* nuclear war, penguin invasions or that you are getting fired because the alarm app failed.
* before flashing it! YOU are choosing to make these modifications, and
* If you point your finger at me for messing up your device, I will laugh at you. Hard
*/
Samsung Galaxy grand device-specific source code :
DeviceDh harald
Kernel: https://github.com/dh-harald/android_kernel_xiaomi_ferrari
Vendor: github
Not Working:
Same like CM12.1
Adaptive brightness
Working:
everything is not listed at not working
Q:is this rom support F2FS
A: of course yes,
Installation instructions
must have 6.6.10
Download ROM and place it at ur internal or external storage
Reboot device into recovery TWRP
Wipe Data, Cache, Dalvik Cache
Format System and Boot
Select Install ROM
Install GAPPS
After successful installation, reboot device
First boot will take 2-3 minutes time
ROM
go here
Gapps
use Open Gapps
How do I logcat?
See this thread how to logcat it's very easy, I suggest to be also newb friendly to use the logcat apps.
http://forum.xda-developers.com/showthread.php?t=1726238
Credits:
Google for Android before Cyanogenmod will slice them off.
The Android community for their contributions
Cyanogenmod for their Branch
Temasek
Arter97
dh.harald
Omerjerk
k2wl
and more
XDA:DevDB Information
Temasek 5.1.1 ferrari, ROM for the Xiaomi Mi 4i
Contributors
faizauthar12
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: latest firmware
Based On: Temasek
Version Information
Status: Stable
Beta Release Date: 2016-01-03
Created 2016-01-04
Last Updated 2016-01-03
Changelog :
20160103 : Initial Release
Build Info :
used UBER TC 4.9 for kernel and rom
used ArchiDroid Optimisation
Whats different in this rom compared to other roms like cm12.1 and RR rom.
Is the rom stable?
One common problem with all cm 12.1 and roms based on it is that they are not quite smooth in usage as the cm 13 is. Is that problem fixed in this rom?
Rajat Naik said:
Whats different in this rom compared to other roms like cm12.1 and RR rom.
Is the rom stable?
One common problem with all cm 12.1 and roms based on it is that they are not quite smooth in usage as the cm 13 is. Is that problem fixed in this rom?
Click to expand...
Click to collapse
+1
Well ,temasek yeah ,a user at xda too
He modded cm12.1 source and inclde some feature from other roms
Also ,i like the art ,yeah it's ifferent thx to arter97
Every rom
Their motto is include much tweak and mods
about smooth
already patched and improved using archidroid optimization + Uber TC (already mentioned at post2)

[M.A.D.] [ROM] [6.0.1] Unofficial CyanogenMod 13 - Elephone Vowney Lite

CyanogenMod 13 is a free, community built distribution of Android 6.0.1 (Marshmallow) which greatly extends the capabilities of your phone.
This is the unofficial build of CM 13 for Elephone Vowney Lite made by the M.A.D. team.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Installation Instructions:
Download rom from here: https://www.facebook.com/MediatekAndroidDevelopers/
OR from xda DevDB (DOWNLOAD Tab)
Download Gapps from OpenGapps: http://opengapps.org/, choose ARM and Android 6.0
boot to recovery
wipe data if you are not coming from CM13.0 already
install rom and gapps
Reboot
XDA:DevDB Information
Unofficial CyanogenMod 13 - Elephone Vowney Lite, ROM for all devices (see above for details)
Contributors
fire855, superdragonpt, DerTeufel1980
Source Code: https://github.com/MediatekAndroidDevelopers
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock 5.1
Based On: CyanogenMod
Version Information
Status: Stable
Created 2016-08-23
Last Updated 2016-08-26
Reserved
Minimal F.A.Q
Q: After ROM boot up, I'm getting SetUP wizard errors / other Gapps FC / Black screen on first boot, why ?
A: On marshmallow based Roms, you need to flash ROM and gapps at the same time
TWRP even allows you to flash multiple .zip files
Q: Why no Mediatek Engineering Menu?
A: Its Mediatek proprietary, ugly , not needed on our builds.
Relevant features used on Mediatek E. Menu have been ported to our builds already using aosp / our implementations ( Sensors calibration , Band Mode, etc)
Q: App "x" is not working, why?
A: First make sure the app works under Marshmallow
Q: Something wrong with my Bluetooth, can't connect /pair with my "x" device , car-BT
A: Bluetooth should be backwards compatible , some OEMs don't also follow some guidelines , surely can be improved.
Post your BT model, Car model and year to help us out determining compatibility issues
Nice job!
what is guide to port this to other device working also by mt6795 bro ?
Thanks team M.A.D we need for mt6580 lp kernel
Bencoderus said:
Thanks team M.A.D we need for mt6580
Click to expand...
Click to collapse
Doogee X5 (mt6580) got a CM build from us.
- The M.A.D. team -
Thanks MAD team and FIRE
Pls we need cm13 for mt6580 lp kernel 3.10.72 for Walton primo rm2mini and the likes... Please help us out
@fire855 sir, is the device tree for Dogee x5 from the M.A.D team use stock untouched prebuilt kernel? if yes, then can we use this device tree as a refernce for compiling cm 13 for mt6582 lp kernel?? Thanks...
dark heart said:
@fire855 sir, is the device tree for Dogee x5 from the M.A.D team use stock untouched prebuilt kernel? if yes, then can we use this device tree as a refernce for compiling cm 13 for mt6582 lp kernel?? Thanks...
Click to expand...
Click to collapse
Yes, I'm using stock prebuilt kernel on doogee. But it's a MM (3.18) kernel and the device tree is made for the MM kernel. You can still use it as base but you also need to do changes.
- The M.A.D. team -
fire855 said:
Yes, I'm using stock prebuilt kernel on doogee. But it's a MM (3.18) kernel and the device tree is made for the MM kernel. You can still use it as base but you also need to do changes.
- The M.A.D. team -
Click to expand...
Click to collapse
sir, I am pretty much sure about changing blobs and ramdisk. But I am concerned about sepolicy changes. do I need to update those as well? this device tree don't have mediatekril we used to use for kk and lp kernel. So, how can we mtk ril?
This is no support thread for other devices and platforms
And surely NOT a porting q&a thread.
Thanks
Iam ported this ROM to my device with same CPU but settings sometimes flicking with black color is this issue from porting the ROM or this happene also in vowney lite ??
Thank you very much for Rom . Only a couple of modifications would ask .. 1 - Camara only 13 MP (21 MP Stock ) .No slow motion recording . 2nd - Light notification does not work ( in Stock , loading, messages, missed calls , low battery )
Hi, can you Port this ROM on Xiaomi Redmi Note 2? This will help a lot all maintainers of this phone(or even of all mt6795 devices) like @lokjianming @danielpinto8zz6 @bemolx @vova.vafin etc.
@fire855,
C O G R A T U L A T I O N S !!
A Nice Job !!
Could you. rom update:
- The camera only 13 Mpx without SlowMotion.
- The notification light stops working.
- It does not work well in 4G mode.
- You can not change the internal memory to SD.
- Waking up the screen with fingerprint is not possible.
It would be great !!!
llopbal
@fire855, thanx for the ROM. Works much better than stock. Just one question - is it possible to make LED notification work? (talking about Vowney Lite).
Agree with llopbal
1. The camera only 13 Mpx instead of 21 Mpx
2. The notification light stops working. This's very sad.
others problems not so important.
BR, akadimka
First of all, thanks for that great ROM! We really need it.
Question... If I backup my current /system/lib/hw/camera.mt6795.so and /system/lib/hw/libcam* and replace it on the new ROM, would the camera work on full resolution (21.5MP)? What else should I do?
I'd like to add camera specs if it's any help:
Back/Primary: imx230mipiraw (21.5 MP Sensor Sony IMX 230 Exmor RS)
Front/Secondary: ov8858mipiraw
Thanks again!
Llopbal said:
@fire855,
C O G R A T U L A T I O N S !!
A Nice Job !!
Could you. rom update:
- The camera only 13 Mpx without SlowMotion.
- The notification light stops working.
- It does not work well in 4G mode.
- You can not change the internal memory to SD.
- Waking up the screen with fingerprint is not possible.
It would be great !!!
llopbal
Click to expand...
Click to collapse
1. Slow motion is a proprietary feature from mtk. I will look into the mpx issue. Very busy currently.
2. Can someone try to replace lights.mt6795.so with the stock lights blob?
3. What doesn't work well with 4G?
4. You can use your sdcard as second internal storage. But you can't switch your internal storage and sdcard.
5. I missed to add off screen detection. I will look into it.
- The M.A.D. team -
Elepone vowney Lite CM13 by @fire855 (M.A.D. Team)
fire855 said:
1. Slow motion is a proprietary feature from mtk. I will look into the mpx issue. Very busy currently.
2. Can someone try to replace lights.mt6795.so with the stock lights blob?
3. What doesn't work well with 4G?
4. You can use your sdcard as second internal storage. But you can't switch your internal storage and sdcard.
5. I missed to add off screen detection. I will look into it.
- The M.A.D. team -
Click to expand...
Click to collapse
@fire855 / The MAD Team
- On 4G, maybe there was not enough coverage in my test.
- The LED notification is not important at this time.
- So will remain pending update:
- The camera 21 MPX
- Add the detection screen with fingerprint.
* Again thanks for a nice job !!!
:good:
Llopbal.

[UNOFFICIAL] CyanogenMod 14.1 for GM 5 Plus

Hello guys, I am going to share my Android 7.1 Nougat Unofficial CyanogenMod 14.1 builds for GM 5 Plus.
Code:
/* Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you blame me in any way for what happens to your device, I will laugh at you.
* BOOM! goes the dynamite
*/
What's working :
-RIL
-WIFI
-Bluetooth
-Camera
-Media Encoding/Decoding
-GPS
-Notification Light
-Sensors
What's not working :
Everything is working well.
*Please let me know if you find any bugs!
Before Installion :
You have to flash this ROM on Stock Nougat or flash N3E92 Vendor and Modem 14.20 before flashing ROM.
GM_5PLUS_v14.20_MODEM_UPDATE_BY_TURKDEVS.zip
GM_5PLUS_N3E92_VENDOR_PARTITION_UPDATE_BY_TURKDEVS.zip
Installion :
-Install the lastest TWRP recovery to your GM 5 Plus.
-Reboot into recovery.
-Wipe Data Factory Reset.
-Install zip from sdcard.
-Find the downloaded CM 14.1 ROM zip and flash it.
Original Thread :
Turkdevs
Download :
Google Drive
Changelog :
20161027 : First Release
XDA:DevDB Information
UNOFFICIAL CyanogenMod 14.1 for GM 5 Plus, ROM for the General Mobile GM 5 Plus
Contributors
asderdd
Sources :
Device Tree: android_device_google_shamrock
Kernel Tree: android_kernel_google_msm8952
Vendor Tree: proprietary_vendor_google
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2016-10-27
Created 2016-10-28
Last Updated 2016-10-29
Thanks, CM is best rom <3
thanks a lot for posting + clear description.
only had problem with google services, solved after flashing open_gapps-arm-7.1-mini-20161030.zip (previous was open_gapps-arm-7.0-mini-<date>)
until now, this rom works like a charm.
7dwergen said:
thanks a lot for posting + clear description.
only had problem with google services, solved after flashing open_gapps-arm-7.1-mini-20161030.zip (previous was open_gapps-arm-7.0-mini-<date>)
until now, this rom works like a charm.
Click to expand...
Click to collapse
does auto rotate work for you? it doesn't work for me
mjz2cool said:
does auto rotate work for you? it doesn't work for me
Click to expand...
Click to collapse
yes, it does
http://forum.xda-developers.com/showpost.php?p=69362675&postcount=83
http://forum.xda-developers.com/galaxy-note-3/development/test-rom-cm14-t3485808/page9
7dwergen said:
yes, it does
http://forum.xda-developers.com/showpost.php?p=69362675&postcount=83
http://forum.xda-developers.com/galaxy-note-3/development/test-rom-cm14-t3485808/page9
Click to expand...
Click to collapse
so i have to use that app to make it work?
rom upgraded now, and smooth-running:
cm-14.1-20161031-UNOFFICIAL-shamrock-by-turkdevs.zip
https://www.androidfilehost.com/?fid=457095661767107883
7dwergen said:
rom upgraded now, and smooth-running:
cm-14.1-20161031-UNOFFICIAL-shamrock-by-turkdevs.zip
https://www.androidfilehost.com/?fid=457095661767107883
Click to expand...
Click to collapse
just installed it, seems to work fine on my new phone, i've swapped it for a new one as the display had some problems, and it seems that phone had more problems that caused the trouble with custom roms i've had so far. only 1 question, is there any way to install google camera? the stock opengapps package seems to be too large so i can't use that to install google camera
mjz2cool said:
just installed it, seems to work fine on my new phone, i've swapped it for a new one as the display had some problems, and it seems that phone had more problems that caused the trouble with custom roms i've had so far. only 1 question, is there any way to install google camera? the stock opengapps package seems to be too large so i can't use that to install google camera
Click to expand...
Click to collapse
i'm am always using open_gapps-arm-7.1-mini-2016-mm-dd.
this rom provides a default camera-app already (package org.cyanogenmod.snap) no problem with that camera.
of course you can manual install google-camera:
http://www.apkmirror.com/apk/google-inc/camera/camera-4-1-006-126161292-release/
but you can also use opencamera from playstore
Sent from my GM 5 Plus using Tapatalk
Thank you for your efforts bringing this amazing build to our phones
Only issue I'm facing is Snapchat. I can't login to my account while using this ROM, and I wanna know why.
7dwergen said:
rom upgraded now, and smooth-running:
cm-14.1-20161031-UNOFFICIAL-shamrock-by-turkdevs.zip
https://www.androidfilehost.com/?fid=457095661767107883
Click to expand...
Click to collapse
rom upgraded, and still smooth-running:
cm-14.1-20161110-UNOFFICIAL-shamrock-by-turkdevs.zip
https://www.androidfilehost.com/?fid=529152257862679499
ref:
http://forum.turkdevs.com/konu-gm-5-plus-cyanogenmod-cm-14-1-rom-android-7-1.html
Change List (changelog) :
[27/10/2016] Seamlessly first version was released.
[28/10/2016] camera with some devices we had not noticed before, and sensor problems have been fixed.
[31/10/2016] has been rebuilt from the current source code ROM. Closed fixed the problems with charging.
[10/11/2016] was rebuilt ROM source code for the November-to-date security patches.
7dwergen said:
rom upgraded, and still smooth-running:
cm-14.1-20161110-UNOFFICIAL-shamrock-by-turkdevs.zip
https://www.androidfilehost.com/?fid=529152257862679499
ref:
http://forum.turkdevs.com/konu-gm-5-plus-cyanogenmod-cm-14-1-rom-android-7-1.html
Change List (changelog) :
[27/10/2016] Seamlessly first version was released.
[28/10/2016] camera with some devices we had not noticed before, and sensor problems have been fixed.
[31/10/2016] has been rebuilt from the current source code ROM. Closed fixed the problems with charging.
[10/11/2016] was rebuilt ROM source code for the November-to-date security patches.
Click to expand...
Click to collapse
can this be flashed dirty? or do i have to do a clean install?
Help please!I'm confronted a bootloop
How to flash vendor and modem please,because my twrp after successfully flashed the two files my modem in bootloader dont changes!?
---------- Post added at 04:44 PM ---------- Previous post was at 04:43 PM ----------
How to flash vendor and modem please,because my twrp after successfully flashed the two files my modem version in bootloader dont changes!?
asderdd said:
Hello guys, I am going to share my Android 7.1 Nougat Unofficial CyanogenMod 14.1 builds for GM 5 Plus.
Code:
/* Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you blame me in any way for what happens to your device, I will laugh at you.
* BOOM! goes the dynamite
*/
What's working :
-RIL
-WIFI
-Bluetooth
-Camera
-Media Encoding/Decoding
-GPS
-Notification Light
-Sensors
What's not working :
Everything is working well.
*Please let me know if you find any bugs!
Before Installion :
You have to flash this ROM on Stock Nougat or flash N3E92 Vendor and Modem 14.20 before flashing ROM.
GM_5PLUS_v14.20_MODEM_UPDATE_BY_TURKDEVS.zip
GM_5PLUS_N3E92_VENDOR_PARTITION_UPDATE_BY_TURKDEVS.zip
Installion :
-Install the lastest TWRP recovery to your GM 5 Plus.
-Reboot into recovery.
-Wipe Data Factory Reset.
-Install zip from sdcard.
-Find the downloaded CM 14.1 ROM zip and flash it.
Original Thread :
Turkdevs
Download :
Google Drive
Changelog :
20161027 : First Release
XDA:DevDB Information
UNOFFICIAL CyanogenMod 14.1 for GM 5 Plus, ROM for the General Mobile GM 5 Plus
Contributors
asderdd
Sources :
Device Tree: android_device_google_shamrock
Kernel Tree: android_kernel_google_msm8952
Vendor Tree: proprietary_vendor_google
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2016-10-27
Created 2016-10-28
Last Updated 2016-10-29
Click to expand...
Click to collapse
is gm5+ 32 bit?

[ROM+KERNEL][UNOFFICIAL]LineageOS 14.1[OPENGL3.2][7.1.1][SDCLANG]

LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Disclaimer:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, [STRIKE]dead SD cards[/STRIKE],
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features :
compiled with Snapdragon LLVM Clang
Vulkan API Blobs
OpenGL ES 3.2 blobs
faizauthar12's kernel
support firmware 8.1.5.0 ( Must )
Instalation :
Wipe your system. data, cache, dalvik-cache ( ART )
Flash firmware 8.1.5.0 by @thewisenerd
Flash this rom
Flash GApps ( opengapps, deltagapps, Dynamic gapps )
Flash supersu / Magisk ( for root access )
Reboot
Enjoy!
Bugs:
FM Radio as usual
need a report ASAP!
Download link :
A new Build made by @anbuchelva
AFH Folder
Credits for the crew​
Thanks to @dh.harald who start a CyanogenMod project
Thanks to @omerjerk who maintain it till MarshMallow
Thanks to @fire855 for rebasing the kernel
Thanks to @thewisenerd for a new and clean kernel that support firmware 8.1.5.0
Thanks to @Rohan purohit who are really really fixing and maintaing the tree after fire855
Thanks to @BlackSoulxxx for Vulkan Blobs and OpenGL ES 3.2
Thanks to me, for what?
Thanks to all people who contribute at contributors
source code :
tree
Kernel
Vendor
Vulkan Blobs
XDA:DevDB Information
Optimized LineageOS 14.1, ROM for the Xiaomi Mi 4i
Contributors
faizauthar12, thewisenerd, anbuchelva
Source Code: http://github.com/lineageos/android
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 8.1.5.0
Based On: LineageOS
Version Information
Status: Stable
Created 2017-03-06
Last Updated 2017-04-07
Screen!
here we go
the screenshot
Reserved
Reporting Bugs
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues.
Frequently Asked Questions:
Q)Why is this UNOFFICIAL?
A) this is a self kang rom, so it won't hit OFFICIAL LABEL
Q) Is VoLTE supported?
A) No. Not UNLESS XIAOMI decides to release modem with enabled volte ( OR anyone here can port it , dont ask questions about how)
Q) Where are Developer options?
A) Go to Settings > About phone, and press five times on Build number.
Q) How can I enable root access?
A) Go to Settings > Developer options > Root access, and enable it for apps, adb or both.
Q) How do I update GApps? (Also useful if you have GApps related problems).
A) Reboot to recovery. Wipe System, Cache and Dalvik Cache. Install ROM + GApps. (Yes, without rebooting). Reboot.
Q: i got an error while flashing
A: it's okay, just ignore them
Q) Why i can't play vulkan games
A) A lots of app detect the device model and chipset, SD615 doesn't have vulkan compatible device for now... , so this is just a blobs. I will try to fix it if it possible
ROM OS Version: 2.3.x Gingerbread ????
shekhi_jas said:
ROM OS Version: 2.3.x Gingerbread ????
Click to expand...
Click to collapse
Opps i forget to change it
It's totally a 7.1.1
Thx
Fixed
FINALLY !!!!! Vulkan ... Here I come !!!
Sorry for stupid question, how to flash 8.1 miui if dont have windows?
great work @faizauthar12 ...
Amazing @faizauthar12 must awaited ROM is here. Will definetly try this one . Sorry but, will my Mac address change by using this ROM because I can't use my college WiFi after this.
Can I use substratum with this rom?
Nilu99 said:
Amazing @faizauthar12 must awaited ROM is here. Will definetly try this one . Sorry but, will my Mac address change by using this ROM because I can't use my college WiFi after this.
Click to expand...
Click to collapse
I am not sure:|
Vinko_234 said:
Can I use substratum with this rom?
Click to expand...
Click to collapse
No , isn't support substratum
Will this ROM get a weekly update similar to your AICP ROM?
shekhi_jas said:
Will this ROM get a weekly update similar to your AICP ROM?
Click to expand...
Click to collapse
Nope
I don't have a power full machine for it
Master faiz _/\_
ryankzmn said:
Sorry for stupid question, how to flash 8.1 miui if dont have windows?
Click to expand...
Click to collapse
flash via twrp
read op for the link
@faizauthar12 thank you so much for the vulkan API
hashroot said:
flash via twrp
read op for the link
@faizauthar12 thank you so much for the vulkan API
Click to expand...
Click to collapse
And
This is it
The compatible TWRP by @thewisenerd
https://s.basketbuild.com/filedl/de...errari/twrp/TWRP-3.0.3.0-20170227-ferrari.img
Battery saver option do not work
overall the rom is good......with nice battery backup
Nice ROM
Thanks to @faizauthar12 for the ROM :fingers-crossed: :good:
Can not enter my TWRP.
Solved thanks
Thanks for the awesome ROM! Keep up the good work

Categories

Resources