[ROM] [COMMUNITY][MM 6.0.1] OctOS (Shield Tab) - Updated September 10, 2016
Another build, compiled from source. But before I get too far...
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and
* YOU acknowledge you are doing so at your own risk.
*/
Now that that's out of the way, this is a build of OctOS, using the device tree, kernel and advice from @Steel01 and the Tegra team. The current build is based off the latest nightly at the time.
NOTICE:
The August 23rd build is going through some further testing as the file is ~30MB smaller than the rest. If using it, make sure you are coming from a previous OctOS MM build first. Have not seen any issues so far, but that may be because I dirty flashed.
WHAT WORKS:
Powers on
Touch
Wifi
Audio
Charges
Play Store (using GApps)
Basic stylus use (of course)
HDMI AV Output (picture only - see below)
Mobile data with Aug 23rd build, for LTE variant (to be confirmed)
WHAT DOES NOT WORK:
No Nvidia controller support
Kodi (older than Jarvis 16beta4) and some games do not have touch
Audio does not come through on HDMI connection
Issue of power-off stalls with the backlight left on until device reboots instead Backlight does stay on for about 12 seconds, but device does power off now
Automatic brightness causes tablet to freeze randomly. Reboot and turn off automatic to fix.
DOWNLOAD:
Mirror (AndroidFileHost)
GAPPS:
OpenGApps
INSTRUCTIONS:
Download ROM above, and GApps package
Save/push files to your (External) SD card (preferably in the root folder where you can find it later)
Reboot into recovery ("adb reboot recovery")
Nandroid/Back up device (optional, but highly recommended, especially if coming from stock)
[*]If coming from Android 5.x...
Reboot to bootloader, activate fastboot (second option)
Flash staging blob from K1 ROM ... "fastboot flash staging blob.img"
Select option to power off device, wait a few seconds, then power on
Let the system bootloop (if applicable), then power off (hold the power button for 10 to 12 seconds)
Use the magic keys (Vol-Dn + Pwr) to get back into bootloader, activate fastboot
Flash TWRP ... "fastboot flash recovery name-of-recovery.img"
Wipe cache and data/factory reset (unless updating from previous OctOS build)
Install ROM, and GApps
Wipe Dalvik cache
Reboot
Enjoy!
CREDITS:
Steel01
The rest of the Tegra team
CyanogenMod
OctOS (incl. Don Kaczmarek, Aaron Weis)
XDA:DevDB Information
[ROM] [COMMUNITY][MM 6.0.1] OctOS (Shield Tab), ROM for the Nvidia Shield Tablet
Contributors
OfficerJimLahey
Source Code: https://github.com/carbon-shield
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Beta
Beta Release Date: 2016-07-09
Created 2016-07-09
Last Updated 2016-09-10
Thanks for the detailed instructions-- kept me from bricking this tablet (again). I noticed the bootloader is now "[undef-build]" as the version number, however everything seems to work OK... Unfortunately the nvidia images do not include bootloader and radios, I guess theyre in the staging blob.
Using with latest bitOK kx6 kernel. Had some weirdness w/ charging but after reflashing DTB and waiting a day it seems ok. Battery life with screen-off is good, screen on...not great but seems about the same as 5.1.1. From what I can see there is no misc drain.
Related
CyanogenMod 11.0 for the Memopad FHD10 4G - ME302KL
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
-----------------------------------------------------------------------------------------------------------------------------------------------------------
What Works:
Touch
Display
Brightness (auto and manual)
4G Network
WIFI
GPS
Bluetooth
Accelerometer
USB Charging
USB OTG
USB Pendrive
Deep Sleep
Front Camera (With othen camera apps, like "Open Camera" form play store.
and other things...
Bugs
Back Camera does not work...
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Installation
You have to unlock tablet with asus app.
You have to use SevenMaxs TWRP RECOVERY for Me302kl
1. Download the ROM and the BOOT.IMG from the link below
2. Download GAPPS
3. Transfer the zip files to your SD card
4. Reboot to recovery mode
Note: You Must use TWRP recovery
5. Optional: Do nandroid backup
6. Wipe data / Factory Reset
7. Install CM zip and GApps zip
8. Install Boot.img zip
9. Reboot to system
Enjoy!
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Download: http://d-h.st/fakX This is only the ROM (system) without Boot.img - DONT'FLASH WITHOUT BOOT.IMG
Download Link for Boot.img http://www103.zippyshare.com/v/xRRsoYKi/file.html UPDATED 28-07-2016
Download TWRP Recovery by SevenMaxs : http://d-h.st/M3ep
To install recovery exstract frm the zip the file recovery.img and put it on the sdcard.
Then connect to the tablet with adb:
Code:
adb shell
su
dd if =/sdcard/recovery.img of =/dev/block/mmcblk0p25
Reboot into recovery VOL+ AND POWER
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Source
Check out the KERNEL Source available on https://github.com/yatto/ME-302-KL
The rom is the Nexus 7 Official CM11 without some libs : system/lib/keystore.msm8960.so and power.msm8960.so and with the /system/vendlor/lib/files from Me302kl 4.2.2 ROM
Feel free to submit any fixes, Just remember to give proper credits when using other people's source.
Credits
Cyanogenmod team
SevenMaxs for his recovery TWRP
If i missed someone contact me!
-----------------------------------------------------------------------------------------------------------------------------------------------------------
XDAevDB Information
CyanogenMod 11 for Me302kl, ROM for the Asus Memopad FDH10 4G
ROM OS Version: 4.4.4 KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod for Nexus7 2013
Version Information
Status: Beta1, Stable
yattodettaman said:
CyanogenMod 11.0 for the Memopad FHD10 4G - ME302KL
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
-----------------------------------------------------------------------------------------------------------------------------------------------------------
What Works:
Touch
Display
Brightness (auto and manual)
4G Network
WIFI
GPS
Bluetooth
Accelerometer
USB Charging
USB OTG
and other things...
Bugs
Camera
others ?...
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Installation
You have to unlock tablet with asus app.
You have to use SevenMaxs TWRP RECOVERY for Me302kl
1. Download the ROM and the BOOT.IMG from the link below
2. Download GAPPS
3. Transfer the zip files to your SD card
4. Reboot to recovery mode
Note: You Must use TWRP recovery
5. Optional: Do nandroid backup
6. Wipe data / Factory Reset
7. Install CM zip and GApps zip
8. Install Boot.img zip
9. Reboot to system
Enjoy!
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Download: http://d-h.st/fakX This is only the ROM (system) without Boot.img - DONT'FLASH WITHOUT BOOT.IMG
Download Link for Boot.img http://d-h.st/PUF4 UPDATED 19-07-2016
Download TWRP Recovery by SevenMaxs : http://d-h.st/M3ep
To install recovery exstract frm the zip the file recovery.img and put it on the sdcard.
Then connect to the tablet with adb:
Code:
adb shell
su
dd if =/sdcard/recovery.img of =/dev/block/mmcblk0p25
Reboot into recovery VOL+ AND POWER
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Source
Check out the KERNEL Source available on https://github.com/yatto/ME-302-KL
The rom is the Nexus 7 Official CM11 without some libs : system/lib/keystore.msm8960.so and power.msm8960.so and with the /system/vendlor/lib/files from Me302kl 4.2.2 ROM
Feel free to submit any fixes, Just remember to give proper credits when using other people's source.
Credits
Cyanogenmod team
SevenMaxs for his recovery TWRP
If i missed someone contact me!
-----------------------------------------------------------------------------------------------------------------------------------------------------------
XDAevDB Information
CyanogenMod 11 for Me302kl, ROM for the Asus Memopad FDH10 4G
ROM OS Version: 4.4.4 KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod for Nexus7 2013
Version Information
Status: Testing,
Click to expand...
Click to collapse
UP
yattodettaman said:
UP
Click to expand...
Click to collapse
Going to try it out thank you!!!
yattodettaman said:
UP
Click to expand...
Click to collapse
This is great , do not stop ! We need a stable 4.4
New Boot.img !
Fixed Deep Sleep bug, Front Camera and a lot of little fixes...
Link to download new boot.img : http://www103.zippyshare.com/v/xRRsoYKi/file.html you have to flash with TWRP recovery.
I installed Open Gapps 4.4.4, and the rom is very usable.
Have a nice day !
Hi!
I flashed rom. The end of the setup wizard fc aosp keyboard. Very hard situation, I did not create google account. I copied from phone Swiftkey app, then was good.
SD card not mounted, can not be used. There is a solution?
Thank you for your work!
(I'm sorry my English is very bad)
Very Strange. ..
I have no Fc. Internal sdcard Works.
You are right. External sdcard does not work.
Use the Last Boot.img.
I flashed open GApps 444 stock too.
Tab works Very fine.
Lilliput works Very fine too. ?
Another problem: baseband unknow. I flashed new boot img
mmarta said:
Another problem: baseband unknow. I flashed new boot img
Click to expand...
Click to collapse
It isn't a nexus7. Baseband is unknown because it is a Duma. What is the issue that baseband Can make?
My tablet ME302KL, not Nexus7.Wifi connect to router, but not mobilnet. Dirty flash: rom, open gapps, new boot img = baseband unknow.
Mobile network works fine. 3g and 4G.
Solved Baseband unknow, but 3G and 4G work fine over wifi.
ME302KL LOLLIPOP http://forum.xda-developers.com/android/general/rom-5-1-1-cm-12-1-unofficial-memopad-10-t3431772
4.4
yattodettaman said:
ME302KL LOLLIPOP http://forum.xda-developers.com/android/general/rom-5-1-1-cm-12-1-unofficial-memopad-10-t3431772
Click to expand...
Click to collapse
Please, give link on android 4.4.ONLY me302kl
Disclaimer
Code:
[COLOR="gray"]
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired [B]because the alarm app failed[/B].
* Please do some research if you have any concerns about features included
* in the products you find here before flashing it!
* YOU are choosing to make these modifications.
*/
[/COLOR]
Prerequisites for Installation
- Must have an unlocked bootloader
- Update TWRP to Android-7.1 builds located here. Please make sure to use the recovery image which is appropriate for your device (Thor or Apollo).
Fresh Installation
- Backup your existing ROM first
- Wipe the /data partition (but you can keep the media storage)
- Flash the ROM File
- Flash Open Gapps: use an ARM 7.1 version smaller than the "full" size to make sure it fits
- Reboot
- Enjoy!
LineageOS-eXtended Downloads
LineageOS Builds for Thor (ggow)
LineageOS Builds for Apollo (ggow)
Gapps
- Open Gapps (use a size smaller than "Full" to make sure it fits)
NOTE: Here's what I do to solve the "Play Games" side load issue... Anytime I update my GApps zip file:
- I download the "full" and "mini" versions of GApps
- Extract the "GApps/playgames-arm.tar.lz" file from the "full" file and add it to the "GApps" folder of the "mini" file.
- Open the installer.sh script in the "mini" file and move the "playgames" line from the full_gapps_list= section into the mini_gapps_list= section
- I use this modified "mini" .zip when flashing CM-14.1 ROMs so that my Play Games install always works.
Source Code (branch: cm-14.1)
- LineageOS-eXtended
- Kernel Source
- Common Device Tree
- Thor Device Tree
- Apollo Device Tree
Credits
- LineageOS Team
- Cyanogenmod Team
- LineageOS-eXtended Team
- CodeAurora
- ggow
- Cpasjuste
- dpeddi
XDA:DevDB Information
LineageOS-eXtended, ROM for the Amazon Kindle Fire HDX 7" & 8.9"
Contributors
ggow
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader, TWRP
Based On: CyanogenMod
Version Information
Status: Testing
Created 2018-02-28
Last Updated 2018-02-28
closed per OP request
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.1 (LP), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
BEFORE INSTALLING THIS ROM, MAKE SURE YOUR DEVICE MODEL IS THE SAME AS TITLE
IF YOU ASK ANY QUESTIONS LIKE "IS THIS FOR MODEL BLABLABLA" THEY WILL BE ALL IGNORGED
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
We'll not support users and answer questions from users which:
are running a custom kernel
have flashed mods
modified system files
didn't follow our intructions word by word
are unfriendly
And most important: DON'T READ THE OP
What's working:
Wifi (connection, tethering, etc)
Bluetooth (need quick patches in download link)
Camera, video codecs
RIL (Calls, SMS, mobile data)
Storage (both internal and external)
MTP storage (both internal and external)
Offline charging
zRAM (compressed-RAM swap)
GAPPS
Tethering (USB, Wifi, Bluetooth)
GPS
Sound recording
Torch (flashlight)
BUGS/Not working:
Laggy recorded videos. In this case, use MX Player, choose SW codecs when you play these videos, they will become normal
Switching to other fonts will get bootloops after restart. In this case, if you use TWRP recovery, go to File Manager >> delete "themes" from /data/system would help you escape this without factory reset
First time installing CyanogenMod 12.1 to your Galaxy , or coming from another ROM:
Install TWRP Recovery
Reboot into Recovery using 3-button-combo (Vol-up+Home+Power)
Do a Nandroid backup! (Optional and only if you weren't running TouchWiz before)
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)*
Install the ROM from sdcard using TWRP Recovery
Optionally install the Google Apps ( get it here: https://opengapps.org ) (pico GAPPS recommended)
Quote:
DOWNLOADS:
ROM: Link
CHANGELOG
Code:
- 2016/06/25
+ Initial release, ported from Galaxy V's CM12.1
- 2016/06/27
+ Switched to built-from-source, no more portings
+ Fixed nearly all problem, except fonts
+ Underclocked to 1,2GHz for stable usage
+ Enable multi-threaded dex2oat >> Faster app installation
+ Fixed installation for some apps (FB, etc...)
Want some screenies? Get them from Screenshot tab
XDAevDB Information
CyanogenMod 12.1, ROM for the Samsung Galaxy
Contributors
Erwin Abs
Source Code: https://github.com/jnkcode/android_kernel_samsung_j13g/tree/cm-12.1
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock 4.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 2
Stable Release Date: 2016-06-27
???
always says SETUP WIZARD HAS STOPPED
- works stable
- issues with WiFi and Bluetooth. WiFi cannot connect - you have to enter the same password multiple times when connecting for the first time. Then it keeps failing to connect from time to time
- more laggy than stock rom and resurrection remix
- installation is very straightforward
Thanks for sharing this rom. Lots of good work.
Lord87 said:
- works stable
- issues with WiFi and Bluetooth. WiFi cannot connect - you have to enter the same password multiple times when connecting for the first time. Then it keeps failing to connect from time to time
- more laggy than stock rom and resurrection remix
- installation is very straightforward
Thanks for sharing this rom. Lots of good work.
Click to expand...
Click to collapse
Try this https://androidfilehost.com/user/?w=settings-dev-files&flid=205876
CyanogenMod 12.1 for SM-J100H with dual SIMs
Thanks for posting this ROM, gave me a chance to test in on a SM-J100H with dual sims: flashed the ROM, the fix and then gapps. Was thinking not to have gapps but an app was requiring Google Play services.
Setup Wizard stopped several times after reboot, worked around it by restarting the phone. Mobile connection was unstable for both sims and kept dropping, overall performance was slow, especially when in Settings. Not sure if RAM on this phones can be upgraded, mentioning it since free memory was scarce.
As noted by another user WIFI setup had to be repeated for it to stick, good work for keeping it simple thu.
c0mpus3rvef said:
Thanks for posting this ROM, gave me a chance to test in on a SM-J100H with dual sims: flashed the ROM, the fix and then gapps. Was thinking not to have gapps but an app was requiring Google Play services.
Setup Wizard stopped several times after reboot, worked around it by restarting the phone. Mobile connection was unstable for both sims and kept dropping, overall performance was slow, especially when in Settings. Not sure if RAM on this phones can be upgraded, mentioning it since free memory was scarce.
As noted by another user WIFI setup had to be repeated for it to stick, good work for keeping it simple thu.
Click to expand...
Click to collapse
yeah i think ram 512 for now is not good especially with gapps that are constantly updating, i think you should buy a new handphone
Let's go join to Redmi 5A
Erwin Abs said:
yeah i think ram 512 for now is not good especially with gapps that are constantly updating, i think you should buy a new handphone
Let's go join to Redmi 5A
Click to expand...
Click to collapse
Totally agreed, it has limitations due to small RAM and older technology. am using my SM-J100H learning about behavior of various custom ROMs. Please bear with me, one observation when using Bluetooth, it said SM-G360H, perhaps not significant. was able to transfer files and use an app that required Bluetooth connection. Just curious if this could cause slow response time. Thanks again.
c0mpus3rvef said:
Totally agreed, it has limitations due to small RAM and older technology. am using my SM-J100H learning about behavior of various custom ROMs. Please bear with me, one observation when using Bluetooth, it said SM-G360H, perhaps not significant. was able to transfer files and use an app that required Bluetooth connection. Just curious if this could cause slow response time. Thanks again.
Click to expand...
Click to collapse
Will it work with the Sm-j100FN?
ugur30 said:
Will it work with the Sm-j100FN?
Click to expand...
Click to collapse
totally different hardware so NOPE
Donwload
Erwin Abs said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.1 (LP), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
BEFORE INSTALLING THIS ROM, MAKE SURE YOUR DEVICE MODEL IS THE SAME AS TITLE
IF YOU ASK ANY QUESTIONS LIKE "IS THIS FOR MODEL BLABLABLA" THEY WILL BE ALL IGNORGED
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
We'll not support users and answer questions from users which:
are running a custom kernel
have flashed mods
modified system files
didn't follow our intructions word by word
are unfriendly
And most important: DON'T READ THE OP
What's working:
Wifi (connection, tethering, etc)
Bluetooth (need quick patches in download link)
Camera, video codecs
RIL (Calls, SMS, mobile data)
Storage (both internal and external)
MTP storage (both internal and external)
Offline charging
zRAM (compressed-RAM swap)
GAPPS
Tethering (USB, Wifi, Bluetooth)
GPS
Sound recording
Torch (flashlight)
BUGS/Not working:
Laggy recorded videos. In this case, use MX Player, choose SW codecs when you play these videos, they will become normal
Switching to other fonts will get bootloops after restart. In this case, if you use TWRP recovery, go to File Manager >> delete "themes" from /data/system would help you escape this without factory reset
First time installing CyanogenMod 12.1 to your Galaxy , or coming from another ROM:
Install TWRP Recovery
Reboot into Recovery using 3-button-combo (Vol-up+Home+Power)
Do a Nandroid backup! (Optional and only if you weren't running TouchWiz before)
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)*
Install the ROM from sdcard using TWRP Recovery
Optionally install the Google Apps ( get it here: https://opengapps.org ) (pico GAPPS recommended)
Quote:
DOWNLOADS:
ROM: Link
CHANGELOG
Code:
- 2016/06/25
+ Initial release, ported from Galaxy V's CM12.1
- 2016/06/27
+ Switched to built-from-source, no more portings
+ Fixed nearly all problem, except fonts
+ Underclocked to 1,2GHz for stable usage
+ Enable multi-threaded dex2oat >> Faster app installation
+ Fixed installation for some apps (FB, etc...)
Want some screenies? Get them from Screenshot tab
XDAevDB Information
CyanogenMod 12.1, ROM for the Samsung Galaxy
Contributors
Erwin Abs
Source Code: https://github.com/jnkcode/android_kernel_samsung_j13g/tree/cm-12.1
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock 4.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 2
Stable Release Date: 2016-06-27
Click to expand...
Click to collapse
A Bugs / Or My phone?
Device : J100H
Bugs (maybe) : Cant Connect To A Wifi (It Saying Cant Connect On This Network)
I Dont Know Its My Phone Or The ROM Sooo? Help
1.Thank You For The Information
2. I Already Know It,After Installing Lineage OS 14.1 (Nougat,Still Didn't Know IS THe ROM Ported Or Not But THe Wifi Works So I Used It (And Installing Family Link Bc That Phone I Will GIve It To My Lil Bro)
3.It Slow af
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Hi everyone i want to share a gsi vendor image that boots most Q and P roms for the samsung galaxy j4 core.
How to install:
reboot to twrp go to format data type yes *this will format all your data*
go back to wipe and select system,vendor,cache,data and dalvik then swipe to wipe
go to install click on install image select the gsi image file then swipe to flash
now select install zip and click on the vendor image you have downloaded and swipe to flash
finally you can flash gapps if your gsi doesn't include them *note: if you dont have enough space to install gapps to to wipe select system and select repair or change file system click on resize system then swipe to reisze*
and if you are into rooting flash magisk zip file
note try to not install gsi roms that aren't over 1.2gb lineageos 17.1 and dotos are prefered
BUGS:
none
What works:
-boots
-offline charging
-sound
-wifi
-gps
-bluetooth
-mtp
-RIL
if you want to report a bug be sure to include logcat
After this thread started to gain downloads, i decided pushed another update with improved peformance!
Download:
V2 Google drive: https://drive.google.com/file/d/1z-OrGTjv9HD9SL2j30EYyUA__xjmhIaR/view?usp=sharing
V1 Google drive: https://drive.google.com/file/d/14-XNmD_19Mt-dFSReBZk8luoeY2ZoD9r/view?usp=sharing
Credits:
@leohiper10 for the sources and allowing me to use his vendor image from his lineageos 16 build (doesnt use his vendor build anymore with V2).
myself for taking my time to test and fix the bugs
XDA: DevDB Information
Fggevhy Vendor for galaxy j4 core
ROM OS Version: 10 Q
ROM Kernel: Linux 3.x
ROM Firmware Required: latest bootloader and dtbo
Based On: Project Treble
Version Information
Status: Stable
Current Stable Version: V2.0
Current Beta Version: V2.0
Stable Release Date: 2021-11-08
Created 2021-09-20
Last Updated 2021-11-08
happy flashing!
Forgot to mention that the gsi image must be arm Aonly i will add that later
Changelog: 08/11/2021
-.img format instead of flashable zip
-Set screen density to 411
-Fixed pretty much all bugs in the older release
-Fixed Unknown baseband bug and unkown imei with old version on j410f
-Better peformance!
Changelog: 22/10/2021
-baked custom kernel onto it
-fixed call audio
-fixed crashing issue of qcrilmsg (responsable for ril)
-fixed wifi issue on j410F
-fixed dual sim on J410F/DS
How u fixed call audio ?
I tried flashing lineage and aosp. With both after going through the process, when I reboot system in twrp, it always reboots to download mode.
Device model: sm-j410f
NsovoXD said:
I tried flashing lineage and aosp. With both after going through the process, when I reboot system in twrp, it always reboots to download mode.
Device model: sm-j410f
Click to expand...
Click to collapse
try with orangefox
also if you have issues flash the first release of the vendor then update to v2
Has anyone tried this /vendor with a Lineage 18.1 GSI? Asking for a friend.
LegoLivesMatter said:
Has anyone tried this /vendor with a Lineage 18.1 GSI? Asking for a friend.
Click to expand...
Click to collapse
should work!
RevengeOS is an operating system based on Android Open Source Project, built with a unique look and performance in mind. It's daily usage ready, lightweight, and elegant.FEATURES:
- Battery health checker
- Brand new RevengeUI, built to be different, built to be elegant
- Brand new media controller
- Systemwide gradients
- New lock screen clock styles
- Incall haptic-feedback
- Kill app button
- Toggle battery percentage in the status bar
- Resume media from Quick Settings
- Playback control from volume buttons
- Wake up with volume buttons
- Quick camera launch from sleep
- 3-button navigation system
- Pill navigation system
- Swipe to screenshot
- Wake on charge
- Proximity sensor check when waking up
- Systemwide sensor block
- And so much more!
INSTRUCTIONS:
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Before installing ROM Zip make sure to flash latest pie firmware WW-16.00.1906.411
If not then download & flash latest pie beta first from here FIRMWARE-ASUS_X00P-WW-16.00.1906.411-user.zip.
INSTALLATION:
Download & Place ROM & Gapps in your internal storage/virtual SD
Boot into TWRP
Wipe System, Vendor, Data, Dalvik, Cache.
Flash the ROM and GApps.
Reboot and Enjoy.
DOWNLOADS:
ROM: Click Here to Download ROM
Gapps : https://opengapps.org/ (ARM64 11.0 Pico Recommended)
BUGS: Screen Cast not working
Grab a logcat right after the problem has occurred (please include at least a few pages of the log, not just the last few lines, unless you know what you're doing). Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues.
XDAevDB Information
REVENGE OS, ROM for the Asus ZenFone Max M1
Contributors
@RazaDroid by tree
@Vhmit by compilation and modifications
@iamsaalim by kernel
Source Code: https://github.com/BlissRoms/platform_manifest/tree/r
Device Tree: https://github.com/mitoaprendiz/device_asus_X00P
Vendor Tree: https://github.com/mitoaprendiz/vendor_asus_X00P
Kernel Tree: https://github.com/asus-msm8937-devs/android_kernel_asus_msm8937
ROM OS Version: Android 11
ROM Kernel: Linux 3.x
ROM Firmware Required: Pie firmware.
SELinux: Enforcing
Version Information
Status: Stable
Current Stable Version: v4.1
Stable Release Date: 2022-06-30
SCREENSHOTS: