Help regarding quick charger - Xiaomi Redmi Note 3 Accessories

So as we know that now our phone supports QC 2.0 on custom ROMs(yay! if you didn't know that)
Now I was searching around for a good charger and I found a good Aukey charger on Amazon IN for about 671 rs(10$)
But upon searching on aliexpress, I found this one. Its really cheap and the reviews are good as well, so any idea about it?
If this is good then I can save a lot of money as its just 4$
http://www.aliexpress.com/item/Orig..._2&btsid=0c205ee3-2c40-4840-840d-78821c709ee1

We already have qc 2.0 as stock charger give upto 1900ampere speed

Rahulraj943472 said:
We already have qc 2.0 as stock charger give upto 1900ampere speed
Click to expand...
Click to collapse
LOL No, that's not quick charger.

Shivam Kuchhal said:
So as we know that now our phone supports QC 2.0 on custom ROMs(yay! if you didn't know that)
Now I was searching around for a good charger and I found a good Aukey charger on Amazon IN for about 671 rs(10$)
But upon searching on aliexpress, I found this one. Its really cheap and the reviews are good as well, so any idea about it?
If this is good then I can save a lot of money as its just 4$ [emoji14]
http://www.aliexpress.com/item/Orig..._2&btsid=0c205ee3-2c40-4840-840d-78821c709ee1
Click to expand...
Click to collapse
Which ROM supports QC 2.0? Sorry i just purchased redmi note 3 32gb.
Sent from my A0001 using Tapatalk

sumchamp said:
Which ROM supports QC 2.0? Sorry i just purchased redmi note 3 32gb.
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
As far as I know, all ROMs based on official CM sources like Krexus, DU, Balika's CM, Zephyr-OS etc.

I just ordered Blitzwolf QC 3.0 charger from banggood. I'll check and confirm, once it arrives here. Thanks.
Sent from my Redmi Note 3 using Tapatalk

I ordered AUKEY QuickCharge 2.0 certified by Qualcomm.. It might take a while until I get it but I'll report how it works on a custom ROM.

Shivam Kuchhal said:
So as we know that now our phone supports QC 2.0 on custom ROMs(yay! if you didn't know that)
Now I was searching around for a good charger and I found a good Aukey charger on Amazon IN for about 671 rs(10$)
But upon searching on aliexpress, I found this one. Its really cheap and the reviews are good as well, so any idea about it?
If this is good then I can save a lot of money as its just 4$
http://www.aliexpress.com/item/Orig..._2&btsid=0c205ee3-2c40-4840-840d-78821c709ee1
Click to expand...
Click to collapse
can i know where they or whom state that the RMN3 that using custom ROM support QC 2.0 ? just want to confirm

Guyz know anyone what rom(kernel) can charge with QC2.0 or more on Kenzo?? I ask becouse with stock dosent charge with QC2.0 charger. Thnx a lot.

this kernel

I order aukey qc 2.0 for 9.2$ on aliexpress
---------- Post added at 10:42 PM ---------- Previous post was at 10:41 PM ----------
QC charger charging phone with 9v and 1.6 A, but on controller it changed to 5v and around 3 A

UPDATE: Using RR ROM with Dominator kernel and it really works!
Model: Aukey PA-U28

Can you suggest a best usb Cable for Redmi Note 3 pro ??
My Usb Cable is giving malfunction problem and it is not charging phone ..
I have searched on Amazon & Flipkart but not getting which one is best for our phone .
I have gone to mi services center but usb Cable was out of stock there ..they said it will take 15 days.
Sent from my Redmi Note 3 using XDA-Developers mobile app

Anands3 said:
Can you suggest a best usb Cable for Redmi Note 3 pro ??
My Usb Cable is giving malfunction problem and it is not charging phone ..
I have searched on Amazon & Flipkart but not getting which one is best for our phone .
Click to expand...
Click to collapse
The Redmi Note 3 does not support USB 3.0 so literally any USB cable will do as long as it is safe. It is your decision which one to buy based on the build quality of the cable (as in how quickly it will break).

Souits said:
Guyz know anyone what rom(kernel) can charge with QC2.0 or more on Kenzo?? I ask becouse with stock dosent charge with QC2.0 charger. Thnx a lot.
Click to expand...
Click to collapse
CM 13 official. 9V 1,2A on off phone.

Qualcomm takes extra bucks to enable the quick charge capability. Though SD 650 supports quick-charge but Xiaomi squeezed those extra bucks to cut off the price. Even its same with Moto G3 (osprey). Even if you use quick charger, it would charge in the same speed. (Also showed in Ranjit's video)

Use Mi4i Changer insteed of using any other charger,it will boost your charging speed.

abhay050 said:
Use Mi4i Changer insteed of using any other charger,it will boost your charging speed.
Click to expand...
Click to collapse
Well, not everyone got Mi4i charger :/

I've got a Aukey quick charge 3 and when I used it the phone LED flashed all the time so I stopped using it just in case it's doing any damage to the battery. It does say that it's backwardly compatible with qc1 and qc2 I'm using blaze kernel.

How determine if mine have quickcharge or not on RN3? I have flash Resurrection Remix rom + ElementalX kernel and when I charge my phone from 15% to 100%, it take about 2hours 10minute. Does this count as quickcharge? Before flashing custom rom, in MIUI, when I charge my phone, I get about the same duration. Just wondering....

Related

Looking for a fast car charger

Hey guys,
Being a lot on the road, I was started to look for fast charging charger for my car.
I would appreciate if anyone with an experience with one of those chargers will share them.
Thank you
Sent from my SM-G920F using XDA Free mobile app
i have been using this one for the last few weeks .. got it on amazon for 16 bucks
Onite 28.5w Dual USB Rapid Car Charger
Bought this one for a road trip and it performed very well. The device doesn't recognize it as a fast charger, but still charges the device from empty to full in about an hour. Also, thanks to KT kernel, I was able to determine that it pulls down just as much current as the OEM charger :good:
Thank you guys
Sent from my SM-G920F using XDA Free mobile app
tomermax said:
Hey guys,
Being a lot on the road, I was started to look for fast charging charger for my car.
I would appreciate if anyone with an experience with one of those chargers will share them.
Thank you
Sent from my SM-G920F using XDA Free mobile app
Click to expand...
Click to collapse
A few months ago I picked up a qualcomm quickcharge compatible charger for around 35 euros including shipping from the US, couldn't find anything cheaper, for a bit less you can pick up an official samsung fastcharger charger
You can't beat this Fast Charger from Verizon. Even has a bright push button LED light on the micro usb end, perfect for plugging the phone in complete darkness.
I got one on amazon (i think) with 4 ports, the bottom being quick charge. Works great. Normally only have quick charge plugged in but its nice to have a few extra spots. even full everything charges nice. I"ll see if I can find a link
THis is what i got and it works great.
http://www.amazon.com/Intelligent-C...spell&keywords=quick+chrge+4+port+car+charger
http://www.androidcentral.com/aukey...20-small-size?utm_source=ac&utm_medium=dlvrit
I don't suppose you've seen any QC2.0 that have dual ports and are about the same size as the Scosche reVolt C2, have you?
kevlarman said:
I don't suppose you've seen any QC2.0 that have dual ports and are about the same size as the Scosche reVolt C2, have you?
Click to expand...
Click to collapse
Dual QC2.0 USB ports: http://www.amazon.com/dp/B00XJ7OTS0?psc=1
i used the CHOE fast charger, it supports Qualcomm quick charge 2.0 in one of the usb port and has 3 other ports. Works well and shows up at fast charging on my s6.
thank you guys for your inputs
i ordered this one http://www.ebay.com/itm/111675461244
thanks
neotekz said:
i used the CHOE fast charger, it supports Qualcomm quick charge 2.0 in one of the usb port and has 3 other ports. Works well and shows up at fast charging on my s6.
Click to expand...
Click to collapse
Hi,
How do I know if my S6 was recognized my car charger as fast charger?
hi,
Dual QC2.0 USB ports:http://www.amazon.com/dp/B00LJT2EPK/
it's far stars.
very quickly.
How fast?
will visit, thanks!
For mine, I got a Quick Charge car charger from tech matte. It's pretty standard. It does quick charge, so that's all good. It was only $10, which I think is a pretty decent price.
You can get one from Amazon or eBay I think, and there are so many good products on it, very convenient to choose from.

Car Charger For Nexus 6P

Nexus 6P just announce yesterday, google said it support fast charge, 5V @3a, TOTAL 15W, but never mentioned if it support qualcomm quick charge 2.0 . Since the Nexus 6P use snapdragon 810, it suppose to support quick charge 2.0?
But anyway, since the nexus 6P use the type c port, the regular car charger won't work it, at least you need to prepare another type c cable or adapter. but today i will recommend a tronsmart type c car charger:
<MODERATOR EDITED - LINK REMOVED>
With this car charger, you just need to plug and charge your nexus 6p directly, and it also offer another port which support quick charge 2.0. So if your family have the old nexus 6 or samsung s6 etc, they also can get quick charge.
Let me know your thought about this little cool car charger?
Couldn't you just use an old quick charge for the car, and just replace the cable with USB c one?
Sent from my Nexus 6 using Tapatalk
GHOSTIVVI said:
Couldn't you just use an old quick charge for the car, and just replace the cable with USB c one?
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Ya im wondering the same thing.
Sent from my D6633 using Tapatalk
I would only get Qualcomm Certified chargers, but that's just me
TheDave1022 said:
I would only get Qualcomm Certified chargers, but that's just me
Click to expand...
Click to collapse
TRONSmart is QC certified the last time I checked. Qualcomm is terrible at updating their certifield devices list
lin013190 said:
Ya im wondering the same thing.
Sent from my D6633 using Tapatalk
Click to expand...
Click to collapse
Yes you can, why wouldn't you be able to? The charger uses a USB 3.0 port from what I've heard but it doesn't matter even if had a SUB 3.1 Type-C port instead on the plug. The phone will determine how much power it can pull from the charger and its backwards compatible with QC 1.0 plus its no different than QC 2.0 from what I've seen it just uses slightly higher rates but the overall output is the same. The output is actually about the same as the Nexus 6's charger which is 14.4W because this one is 15W.
I was thinking of this one and getting a usb-c cable.
http://www.amazon.com/Qualcomm-Certified-Tronsmart%C2%AE-Charger-Included/dp/B00XU0GONO/ref=pd_sim_sbs_147_6?ie=UTF8&refRID=0MVM8WZCXCEWTRF54ZWH&dpID=41wbYCT8X6L&dpSrc=sims&preST=_AC_UL160_SR160%2C160_
bought this http://amzn.com/B0146DW2AM while it was on sale for $11 last week.
GeekEric I Bought exactly the same one from Amazon UK. Should be here early next week! Obviously I can't test the USB-C connection yet but it'll be interesting to see how quickly it charges my Nexus 5 with the other port.
Darryl991 said:
GeekEric I Bought exactly the same one from Amazon UK. Should be here early next week! Obviously I can't test the USB-C connection yet but it'll be interesting to see how quickly it charges my Nexus 5 with the other port.
Click to expand...
Click to collapse
Have you got the UK link? Would be interested in buying one.
Just to clarify, the Nexus 6P has a USB 2.0 socket, not 3 or 3.1, but utilises the USB-C 3A charger for fast charging.
USB-C ≠ USB 3.1. One is the plug type, one is the speed of data transfer. :good:
Here you are!
I haven't enough posts to post links but stick amazon uk in front!
/gp/product/B0146FK3G0?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00[/url]
vido.ardes said:
Have you got the UK link? Would be interested in buying one.
Just to clarify, the Nexus 6P has a USB 2.0 socket, not 3 or 3.1, but utilises the USB-C 3A charger for fast charging.
USB-C ≠ USB 3.1. One is the plug type, one is the speed of data transfer. :good:
Click to expand...
Click to collapse
Darryl991 said:
Here you are!
I haven't enough posts to post links but stick amazon uk in front!
/gp/product/B0146FK3G0?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00[/url]
Click to expand...
Click to collapse
Thanks for that, although it does only say 2A instead of 3A. Might wait til some more come out
Ah, yes. The one I have at the moment is only 1.1A on each port so if using satnav it drains the battery. Wasn't able to find that one in 3A.
Sent from my Nexus 5 using Tapatalk
fApple said:
bought this http://amzn.com/B0146DW2AM while it was on sale for $11 last week.
Click to expand...
Click to collapse
From what I've read this won't do fast-charge on a Nexus 6p, since the Nexus 6p does not support Quick Charge 2.0, but instead USB-C 3.1.
https://productforums.google.com/forum/#!topic/nexus/z9BfgJRQjFE;context-place=topicsearchin/nexus/quick$20charge$202.0
---------- Post added at 01:57 PM ---------- Previous post was at 01:54 PM ----------
serpa4 said:
I was thinking of this one and getting a usb-c cable.
http://www.amazon.com/Qualcomm-Certified-Tronsmart%C2%AE-Charger-Included/dp/B00XU0GONO/ref=pd_sim_sbs_147_6?ie=UTF8&refRID=0MVM8WZCXCEWTRF54ZWH&dpID=41wbYCT8X6L&dpSrc=sims&preST=_AC_UL160_SR160%2C160_
Click to expand...
Click to collapse
As far as I can tell, the nexus 6p won't support Qualcomm QC2, which is what this uses. I could only find one 3A USB-C charger on Amazon, and I have no idea whether it would work. I'd look for things designed for Chromebook pixels and macbooks and not something that advertises Android compatibility, since most Android phones don't use USB-C.
rich0 said:
From what I've read this won't do fast-charge on a Nexus 6p, since the Nexus 6p does not support Quick Charge 2.0, but instead USB-C 3.1.
https://productforums.google.com/forum/#!topic/nexus/z9BfgJRQjFE;context-place=topicsearchin/nexus/quick$20charge$202.0
---------- Post added at 01:57 PM ---------- Previous post was at 01:54 PM ----------
Click to expand...
Click to collapse
Yea, was reading the same thing earlier.. and its very disappointing that they decided not to use QC 2.0. I really havent been able to find anything that supports the 5v/3a spec for a car charger, and google doesnt list one in their store either. Hopefully new products will start showing up soon.
fApple said:
Yea, was reading the same thing earlier.. and its very disappointing that they decided not to use QC 2.0. I really havent been able to find anything that supports the 5v/3a spec for a car charger, and google doesnt list one in their store either. Hopefully new products will start showing up soon.
Click to expand...
Click to collapse
Damn, this is getting annoying... this battery life better be magical!
fApple said:
Yea, was reading the same thing earlier.. and its very disappointing that they decided not to use QC 2.0. I really havent been able to find anything that supports the 5v/3a spec for a car charger, and google doesnt list one in their store either. Hopefully new products will start showing up soon.
Click to expand...
Click to collapse
It still chargers just as fast according to Google so I hope that proves to be true when people get it. 1-100% in 91 minutes for a 3450mah battery is pretty good by any standard.
So, we shouldn't be looking for quick charge Chargers but USB C certified chargers at the 3 amp rating?
RED ZMAN said:
So, we shouldn't be looking for quick charge Chargers but USB C certified chargers at the 3 amp rating?
Click to expand...
Click to collapse
This is my question also.
what about this?
http://www.hellonomad.com/products/roadtrip
warplane95 said:
what about this?
http://www.hellonomad.com/products/roadtrip
Click to expand...
Click to collapse
Just has 1.5 amps per port, so not really 5v/3a

Quick Charge

Hi guys. Moto G 2015 has a Snapdragon 410 which support quick charge 2.0 but the smartphone doesn't support that feature. There's any trick to enable it? Thanks
From the official Qualcomm site
View attachment 3520554
Its an YES.
but it will lower the Battery life if Quickcharging is done .. so better dont do any risks with NON REMOVABLE BATTERY
even though it supports Quickcharge some people say it wont be noticeable ,but some say it charges in lesser time .. but i havent tested any
i am also eager to know the answers of experts :good::highfive: ; hope we get good answers to this post
pasmadferit said:
Hi guys. Moto G 2015 has a Snapdragon 410 which support quick charge 2.0 but the smartphone doesn't support that feature. There's any trick to enable it? Thanks
Click to expand...
Click to collapse
The SoC supports up to QC 2.0, but the charger IC Moto used doesn't.
The max you will get is 800mA.
Cheap Moto could at least used a simple QC 1.0 charger IC compatible up to 1500mA, but no.
You got the cheaper of the cheapest...
So, anything goes?
eng.stk said:
The SoC supports up to QC 2.0, but the charger IC Moto used doesn't.
The max you will get is 800mA.
Cheap Moto could at least used a simple QC 1.0 charger IC compatible up to 1500mA, but no.
You got the cheaper of the cheapest...
Click to expand...
Click to collapse
I recently purchased this device and it arrived with no charger at all, probably removed because it was garbage? I have two chargers that can be used, one is a now several years old HTC One m7 charger which outputs 1A and has QC 1.0
The other is a Google Chromecast 2nd generation LPS supply with 1A and probably not QC 1.0?
Either way, what I have been hearing is that people either get two or four hours+ of waiting in order for it to be charged up. Since both are above 800 mA (assuming this is the true max current) then I wonder if there could be a difference between these two. If there isn't then of course the newer one is safer to use as it has not got the years of wear the HTC One m7 have done to it, but that would cost me quick charge. Buying new brand USB chargers here with ~2A can cost 30 dollars so want to avoid it
Thanks if you ever make a reply. Going to test this out later when I have time to discharge completely.
EDIT: Assuming the cable they included supports their max charging standard, I hope at least... I know some cables aren't up to specifications but they couldn't have given me a bad cable that's too much.
Ernoz said:
I recently purchased this device and it arrived with no charger at all, probably removed because it was garbage? I have two chargers that can be used, one is a now several years old HTC One m7 charger which outputs 1A and has QC 1.0
The other is a Google Chromecast 2nd generation LPS supply with 1A and probably not QC 1.0?
Either way, what I have been hearing is that people either get two or four hours+ of waiting in order for it to be charged up. Since both are above 800 mA (assuming this is the true max current) then I wonder if there could be a difference between these two. If there isn't then of course the newer one is safer to use as it has not got the years of wear the HTC One m7 have done to it, but that would cost me quick charge. Buying new brand USB chargers here with ~2A can cost 30 dollars so want to avoid it [emoji14]
Thanks if you ever make a reply. Going to test this out later when I have time to discharge completely.
EDIT: Assuming the cable they included supports their max charging standard, I hope at least... I know some cables aren't up to specifications but they couldn't have given me a bad cable that's too much.
Click to expand...
Click to collapse
Doesn't matter hoe much your charger can put out, the device chargng IC will only drawb800mA max.
Sent from my blu_spark'd OnePlus X using Tapatalk
eng.stk said:
Doesn't matter hoe much your charger can put out, the device charger IC will only dram 800mA max.
Sent from my blu_spark'd OnePlus X using Tapatalk
Click to expand...
Click to collapse
Ah, I see, so QC 1.0 is just another word for max 800 mA and there is no "chargers" with this feature? Thanks for clarifying.
Old thread I know, but I'd like to share that, depending on cable and charger, my moto G3 charges at almost 1A (970 mah) when its battery is under 60%. Then from 60% on it charges at roughly 700 mah. Moto G3 2015 (X1540), ROM Resurrection remix 5.7.4 (MM 6.0.1), kernel squid r22, charger Asus 2.5 A, cable Asus also.

Fast Chargers

Any ideas on where to get a UK plug fast charger? I hear the Mate 8 plug works for fast charging.
I guess I won't even be able to find a car charger as well so my old fast chargers are useless now!
Sent from my HUAWEI VNS-L31 using Tapatalk
I own a Mate 8 and I tried with the quick charger on P9 Lite and it's just charging normal
It's not a feature the quick charge on the P9 Lite. Hardware it's not there...
Oh I thought it was the same as P9 with hisilicon fats charge.but guess not...
Sent from my HUAWEI VNS-L31 using Tapatalk
Charger included is "slow charge" 1A. Device is capable of 2A (not "fast charge")
plzextendcookietime said:
Charger included is "slow charge" 1A. Device is capable of 2A (not "fast charge")
Click to expand...
Click to collapse
Hi, I am planning to buy this phone and the only thing holding me back is the slow charging time with stock 1A charger
Your comment provides some hope that phone can handle 2A [emoji846]
Is this your experience/observation or you found reference of this capability online?
Sent from my iPhone using Tapatalk
Lieutenantdaan said:
Hi, I am planning to buy this phone and the only thing holding me back is the slow charging time with stock 1A charger
Your comment provides some hope that phone can handle 2A [emoji846]
Is this your experience/observation or you found reference of this capability online?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I found this
Although the Huawei P9 lite can receive two amps and 10 watts of power from a charger, Huawei includes only a one amp and five watt power supply with the P9 lite, which results in rather slow loading times.
https://www.androidpit.com/huawei-p9-lite-review
sub1zero said:
I found this
Although the Huawei P9 lite can receive two amps and 10 watts of power from a charger, Huawei includes only a one amp and five watt power supply with the P9 lite, which results in rather slow loading times.
https://www.androidpit.com/huawei-p9-lite-review
Click to expand...
Click to collapse
Thanks
This is promising
However, couple of users have replied in other threads that phone doesn't charge any faster with 2A charger
If only someone who had this device could actually test and confirm...
Sent from my SM-G930F using Tapatalk
Lieutenantdaan said:
Thanks
This is promising
However, couple of users have replied in other threads that phone doesn't charge any faster with 2A charger
If only someone who had this device could actually test and confirm...
Sent from my SM-G930F using Tapatalk
Click to expand...
Click to collapse
If i understand for proper charging you need 2A charger and 2A capable USB. I ordered from ebay OEM Huawei 2A 5V charger and 2A 5V capable USB (Nikilin) just to test will it work.
sub1zero said:
If i understand for proper charging you need 2A charger and 2A capable USB. I ordered from ebay OEM Huawei 2A 5V charger and 2A 5V capable USB (Nikilin) just to test will it work.
Click to expand...
Click to collapse
Great
Though I think any 2A charger and cable could probably work
Better be safe and use Huawei charger and best cable as you mentioned above
Do share your findings please...
Sent from my SM-G930F using Tapatalk
Lieutenantdaan said:
Great
Though I think any 2A charger and cable could probably work
Better be safe and use Huawei charger and best cable as you mentioned above
Do share your findings please...
Sent from my SM-G930F using Tapatalk
Click to expand...
Click to collapse
Ofc as soon as the shipment arrives.
sub1zero said:
Ofc as soon as the shipment arrives.
Click to expand...
Click to collapse
Hi I've ordered a 2.4A charger (ravpower) but with ampere app I see it charges slower than the original one, the same using a 2.4 powerbank
Is this phone compatible with 2.0A charging or you need the original huawei 2.0 charger?
@Bumblecito can you please check how much charges with the mate 8 charger? Thanks
Albyfenix said:
Hi I've ordered a 2.4A charger (ravpower) but with ampere app I see it charges slower than the original one, the same using a 2.4 powerbank
Is this phone compatible with 2.0A charging or you need the original huawei 2.0 charger?
@Bumblecito can you please check how much charges with the mate 8 charger? Thanks
Click to expand...
Click to collapse
I think this phone can't take more than 1A
@Bumblecito confirmed the same in his post that Huawei mate 8 charger made no difference to charging time
Sent from my SM-G930F using Tapatalk
Lieutenantdaan said:
I think this phone can't take more than 1A
@Bumblecito confirmed the same in his post that Huawei mate 8 charger made no difference to charging time
Sent from my SM-G930F using Tapatalk
Click to expand...
Click to collapse
What a pity...but why in the reviews say that it can handle up to 2A?
Albyfenix said:
What a pity...but why in the reviews say that it can handle up to 2A?
Click to expand...
Click to collapse
I was also misled by the same reviews and raised this query on xda
Several members have now confirmed it is limited to 1A
Guess those were just incorrect reviews...[emoji53]
Sent from my SM-G930F using Tapatalk
I spend a lot of time reviewing the dmesg output from the kernel and I have often seen mention an "FCC Limit" during charging. It is possible that the kernel is imposing a "limit" to be FCC compliant... Just a thought...
Meticulus said:
I spend a lot of time reviewing the dmesg output from the kernel and I have often seen mention an "FCC Limit" during charging. It is possible that the kernel is imposing a "limit" to be FCC compliant... Just a thought...
Click to expand...
Click to collapse
Mmm, but maybe if it was limited, is not a good idea to unlock it, right?
Meticulus said:
I spend a lot of time reviewing the dmesg output from the kernel and I have often seen mention an "FCC Limit" during charging. It is possible that the kernel is imposing a "limit" to be FCC compliant... Just a thought...
Click to expand...
Click to collapse
Interesting, is kernel source code releases by huawei? In that case someone could have a look...
Sent from my SM-G930F using Tapatalk
Lieutenantdaan said:
Interesting, is kernel source code releases by huawei? In that case someone could have a look...
Sent from my SM-G930F using Tapatalk
Click to expand...
Click to collapse
This is what I keep seeing in the log: https://github.com/Meticulus/androi...rivers/power/hisi/coul/hisi_coul_core.c#L2634
What I am seeing and measuring is that mine, the 3GB dual sim model, max current draw is 1.08 Amp.
This is the max the device will charge at no matter what if you connect a quick charge ... even a nuclear powerplant that can provide a billion Amps at 5V as long as the kernel or charging circuit is like now. A bit painful but I find the battery life to be good. Good enough so it won't be a deal breaker.
I've had phones that died while using the GPS in the car and on a charger, this one doesn't if you use a quality charger and cable.

Quick Charge 3.0 USB charger for Mi Max 3GB/32GB version

Did you happen to know for Quick Charge 3.0 USB phone charger for Mi Max phone, I was looking for one in eBay and not sure which one will be suitable with Mi Max, if someone is using Quick Charge 3.0 charge, please let me know for it, thanks.
tinkko said:
Did you happen to know for Quick Charge 3.0 USB phone charger for Mi Max phone, I was looking for one in eBay and not sure which one will be suitable with Mi Max, if someone is using Quick Charge 3.0 charge, please let me know for it, thanks.
Click to expand...
Click to collapse
Download the supporting charger list from Qualcomm site.
I use the 18w anker qc 3.0 charger from Amazon, along with a 3m nylon anker USB cable, my Max Prime 128gig charges 0-100 in just over 120mins, The anker plug is 9.99gbp and the cable is 6.99gbp
Sent from my MI MAX using Tapatalk
tinkko said:
Did you happen to know for Quick Charge 3.0 USB phone charger for Mi Max phone, I was looking for one in eBay and not sure which one will be suitable with Mi Max, if someone is using Quick Charge 3.0 charge, please let me know for it, thanks.
Click to expand...
Click to collapse
Check this
qualcomm.com/documents/quick-charge-device-list
kyler084 said:
I use the 18w anker qc 3.0 charger from Amazon, along with a 3m nylon anker USB cable, my Max Prime 128gig charges 0-100 in just over 120mins, The anker plug is 9.99gbp and the cable is 6.99gbp
Click to expand...
Click to collapse
I think your charger is more slow than the European stock
---------- Post added at 01:49 AM ---------- Previous post was at 01:48 AM ----------
Preshak said:
Download the supporting charger list from Qualcomm site.
Click to expand...
Click to collapse
I was thinking to buy a tronsmart QC 3.0 quick charger. Maybe u should too
but does 3/32 version support QC?
bonya1423 said:
but does 3/32 version support QC?
Click to expand...
Click to collapse
Yes this version supports 3.0 quick charging
Is there any official QC 3 charger for Mi Max available in india ? or something from other mainstream phone manufacturers that could be used with Mi Max ?
I am using my old Galaxy Note 4 charging brick with the Mi Max cable included in the box and charging speed is great on both official MIUI ROM or Validus ROM, 2360 mAh
I've been using an Aukrey Qualcomm 3.0 Quick Charger with my mi max; charges it up from 2℅ to 100℅ within 25-30 minutes, which is quite impressive regarding the fact that it bears one of the largest batteries(4850mAh) in the smartphone market.
So, you should opt for this particular one........i guess?
I got Tronsmart and its working great, and it was listed in Qualcomm pdf.
I read about that quick charge 2.0 charges as fast as quick charge 3.0 , the difference is that QC 3.0 allows wider selection of voltages , so the main difference is not speed but compatibility . Does someone using QC 2.0 and what times do you get from 1-2% to 100% ? In my town there is only QC 2.0 on store and i dont want to order online and wait weeks
firkosa said:
I read about that quick charge 2.0 charges as fast as quick charge 3.0 , the difference is that QC 3.0 allows wider selection of voltages , so the main difference is not speed but compatibility . Does someone using QC 2.0 and what times do you get from 1-2% to 100% ? In my town there is only QC 2.0 on store and i dont want to order online and wait weeks
Click to expand...
Click to collapse
I guess not much a difference, I am using Quick Charge 1.0 (Galaxy Note 4 charging brick) and the charging speed is decent. So I guess the difference will be very few minutes that is negligible in real life IMO
https://forum.xda-developers.com/showpost.php?p=70521049&postcount=9
I ordered Anker wall charger 3.0 and 2.0
I'll try it and see what will give me with Ampere app
Yaz S.H. said:
I've been using an Aukrey Qualcomm 3.0 Quick Charger with my mi max; charges it up from 2℅ to 100℅ within 25-30 minutes, which is quite impressive regarding the fact that it bears one of the largest batteries(4850mAh) in the smartphone market.
So, you should opt for this particular one........i guess
Click to expand...
Click to collapse
are u sure??within 30minute??
StonebridgeGr said:
I was thinking to buy a tronsmart QC 3.0 quick charger. Maybe u should too
Click to expand...
Click to collapse
+1, Using tronsmart QC 3.0 on hydrogen and helium and it works perfectly.
With Tronsmart QC 3.0 : from %30 to %100 in 2hrs and 9min
not like the original charger +heating up+
For me. With the tronsmart w1ct I get 90% with 2 hours charging.. so it's slow
Yaz S.H. said:
I've been using an Aukrey Qualcomm 3.0 Quick Charger with my mi max; charges it up from 2℅ to 100℅ within 25-30 minutes, which is quite impressive regarding the fact that it bears one of the largest batteries(4850mAh) in the smartphone market.
So, you should opt for this particular one........i guess
Click to expand...
Click to collapse
i dont think that there is a charger out there that can charge Mi Max from 2% to 100% in 25-30 mins ..
---------- Post added at 11:37 PM ---------- Previous post was at 11:36 PM ----------
Sir Mohd said:
With Tronsmart QC 3.0 : from %30 to %100 in 2hrs and 9min
not like the original charger +heating up+
Click to expand...
Click to collapse
for me, with tronsmart wc1t from 2 % to 100% 2 hours and 10 mins :/
My Tronsmart W3PTA charges Mi Max battery from 5% to 50% for 30 minutes

Categories

Resources