HOW TO INSTALL TWRP AND ROOT ASUS ZENFONE MAX (Z010D) Android 6.0.1 [ww_13.8.26.31 ] - Asus Zenfone Max Guides, News, & Discussion

the step by step guideline is like these :
UPDATE
Due to the fact that Asus has finally released the bootloader unlock utility for the device , you can now flash twrp and root without using a beta kernel as described above in this post , what is now needed is just to download the unlock bootloader apk from here http://dlcdnet.asus.com/pub/ASUS/Ze...8.1970894933.1503698507-1463517309.1503322403 ,unlock the device , after that use the same process and commands to flash twrp directly , after that , root using the same files as described below.
INSTALLATION OF TWRP
1. download minimal ADB and fastboot from here https://yadi.sk/d/JuXDyaWLsitGv and install with icon on desktop.
2. dowload the custom recovery image from here https://yadi.sk/d/kT5i3rNksitPD
3. enable usb debugging ,connect to PC and boot into fastboot mode.
4. start minimal ADB and enter the following commands :
Code:
fastboot devices
hit enter button
Code:
fastboot flash recovery
after inputing this command press the space key on the keyboard and drag the recovery .img file to the command prompt window OR enter the directory of the recovery.img file.
5. wait for everything to be done , it might come up with a message saying ""FAILED(remote:cant flash unsigned image)" , don't worry about that .
6. IMPORTANT! POWER OFF THE DEVICE BY LONG PRESSING THE POWER BUTTON AND BOOT STRAIGHT INTO RECOVERY BY PRESSING VOLUME DOWN(-),IF YOU ALLOW THE DEVICE TO BOOT TO NORMAL SCREEN AT FIRST BOOT,THE STOCK RECOVERY WILL BE RESTORED !!
7. after booting into TWRP you can now boot into normal screen and thats it folks , you're done
ROOT
1. download the superSU file from here https://yadi.sk/d/Yhm6fnohsiugr and flash from recovery , done
DISCLAIMER :YOU ARE DOING EVERYTHING AT YOUR OWN RISK ,NO ONE IS RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE !
credits to the 4pda.ru guys in this thread http://4pda.ru/forum/index.php?showtopic=726975,jekpol,knedlyk and others !

Hello:
¿Is this method valid for ww_13.8.26.36_20160624?
Thank you in advance for your help.

cerillo63 said:
Hello:
¿Is this method valid for ww_13.8.26.36_20160624?
Thank you in advance for your help.
Click to expand...
Click to collapse
Yes its valid, just tried it on my device a few hours ago ,everything went through as expected :good:

jide1 said:
Yes its valid, just tried it on my device a few hours ago ,everything went through as expected :good:
Click to expand...
Click to collapse
Ok
I'll try to do it tonight.
Thanks a lot for your help.

Just an important message regarding this thread
Please note that this tutorial only works for the older Asus Zenfone Max not the newer version with the Snapdragon 615. Don't apply this procedure on the new upgraded hardware device or you will face many problems.

sarthakgrover said:
Please note that this tutorial only works for the older Asus Zenfone Max not the newer version with the Snapdragon 615. Don't apply this procedure on the new upgraded hardware device or you will face many problems.
Click to expand...
Click to collapse
Thank you for your advice.
I've got the older Max, with snapdragon s410
---------- Post added at 08:16 PM ---------- Previous post was at 07:38 PM ----------
Hi again, I've followed the instructions, and now my phone is successfully rooted.
Thanks everyone , especially "jide1" for creating this useful post.

Hey mates.
1) Is it necessary to flash the RAW beta file first? I've had no luck flashing the TWRP over the OTA stock update.
2) is it possible to do a FLASHALL from a Linux environment? I noticed that FASTBOOT had a FLASHALL command, but i'm not sure if it requires a ZIPped file or can work with a RAW image.

bryceatjapan said:
Hey mates.
1) Is it necessary to flash the RAW beta file first?
Click to expand...
Click to collapse
yes, you need to flash the beta file first in other to change the kernel version .

Waiting For device!!
I have been trying to flash the Android Raw file,but as soon as i enter the command,cmd says "WAITING FOR DEVICE".I have been trying it for hours and still no clue

uchiha07 said:
I have been trying to flash the Android Raw file,but as soon as i enter the command,cmd says "WAITING FOR DEVICE".I have been trying it for hours and still no clue
Click to expand...
Click to collapse
1. Is usb debugging enabled ? , pls check
2. is the device recognized ? to check this , install minimal adb and fastboot (link in the OP) then enter these command : fastboot devices after entering the command, the serial number of the device should appear , if you dont see the serial number , then :
3. install all drivers (adb , android usb drivers , etc )

Hey guys I have flashed twrp vid recovery, screen show as you said but when I boot into recovery, it's still stock

Đậu SôCiu said:
Hey guys I have flashed twrp vid recovery, screen show as you said but when I boot into recovery, it's still stock
Click to expand...
Click to collapse
It seems you did not read the guide carefully, after flashing TWRP,disconnect cable from pc ,turn off device by long pressing power button , then boot directly into recovery without allowing the device to boot into home screen at first boot.

jide1 said:
It seems you did not read the guide carefully, after flashing TWRP,disconnect cable from pc ,turn off device by long pressing power button , then boot directly into recovery without allowing the device to boot into home screen at first boot.
Click to expand...
Click to collapse
No I did it completely the same as guide. But I see now, my version is 13.8.16.36, and it's very hard to load a custom recovery without unlocking bootloader
Sent from my ASUS_Z010D using Tapatalk

Đậu SôCiu said:
No I did it completely the same as guide. But I see now, my version is 13.8.16.36, and it's very hard to load a custom recovery without unlocking bootloader
Sent from my ASUS_Z010D using Tapatalk
Click to expand...
Click to collapse
you probably mean version 13.8.26.36 and not 13.8.16.36 , the method works equally on firmware version 13.8.26.36 the most important thing is just to change the kernel version , you're probably doing something wrong.

jide1 said:
you probably mean version 13.8.26.36 and not 13.8.16.36 , the method works equally on firmware version 13.8.26.36 the most important thing is just to change the kernel version , you're probably doing something wrong.
Click to expand...
Click to collapse
I follow exactly what the OP mentioned above. But nothing happen. And this's mine. Have you rooted yours yet?? What is your version??
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my ASUS_Z010D using Tapatalk

Đậu SôCiu said:
I follow exactly what the OP mentioned above. But nothing happen. And this's mine. What is your version??
Click to expand...
Click to collapse
for TWRP to be succesfully installed , the kernel version must change to this :

New kernel root ok .
★✩★ TapTap in 7HD Rom ★✩★

S3V3N said:
New kernel root ok .
★✩★ TapTap in 7HD Rom ★✩★
Click to expand...
Click to collapse
please make your post more informative , if you have a way of installing TWRP and root without changing kernel version, pls post a comprehensive guide.

today I give AutoRootKernel v.2 how to write about the places here stranded
★✩★ TapTap in 7HD Rom ★✩★
---------- Post added at 05:19 PM ---------- Previous post was at 04:32 PM ----------
jide1 said:
please make your post more informative , if you have a way of installing TWRP and root without changing kernel version, pls post a comprehensive guide.
Click to expand...
Click to collapse
http://forum.xda-developers.com/zenfone2/general/kernel-autorootkernel-asus-zenfone-max-t3388576

S3V3N said:
today I give AutoRootKernel v.2 how to write about the places here stranded
★✩★ TapTap in 7HD Rom ★✩★
---------- Post added at 05:19 PM ---------- Previous post was at 04:32 PM ----------
http://forum.xda-developers.com/zenfone2/general/kernel-autorootkernel-asus-zenfone-max-t3388576
Click to expand...
Click to collapse
How can I install autoroot?? I can't install twrp
Sent from my ASUS_Z010D using Tapatalk

Related

How to : Flash HTC One Mini with out S-OFF and no need RUU Stock ROM

Tampered
Unlocked
S-ON
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can't find RUU Stock ?
No S-OFF ?
Looping in Bootloader / Recovery Mode?
์ABD Push ? ADB Shell ? ADB Sideload?
Forget about it, that will no longer need in above
What you need is just simple
1. Unlock Bootloader
2. Recover : TWRP 2.7.0.5
3. ROM :m4kk_4.4.2_3.10.401.4_root-odex.zip
4. USB Stick
5. USB OTG
Instruction
1. Unlock device with Unlock Bootloader
Unlock Bootloader
2. Download ROM and Copy to Flash Drive
m4kk_4.4.2_3.10.401.4_root-odex
3.Flash recovery TWRP 2.7.0.5
Download TWRP 2.7.0.5
Update 29/04/2014
[*] Push your device to recovery mode by Hold " power + Volume Down"
[*] Go to SDK Tool for fastboot in your Computer
Type : fastboot flash recovery TWRP 2.7.0.5.img
[*] Go to recovery mode in your device , then plug in USB Flash drive with USB OTC and connect to your device
[*] Select Advance >> Mount USB OTG , select Install located to ROM in Flash drive
[*] Then just flash ROM m4kk_4.4.2_3.10.401.4_root-odex.zip
[*] Wait for moment until Successfully
[/LIST]
Done and reboot your device !!!!!!
No more put your device for paperweight any more ( I've been made my device for paperweight a month, until I found this solution ,and I made it with no cost for replaced main board)
This is important to flash ROM with out RUU Stock and S-OFF
After all you can use Romrunner to S-OFF
(It's 100% worked for me)
Finally I can make my HTC One Mini to S-OFF
and able use nay tools to turn back to Locked again
Understand but How unlock bootloader :/ I m using 4.4.2 kit Kat possible ?
cobramax said:
Understand but How unlock bootloader :/ I m using 4.4.2 kit Kat possible ?
Click to expand...
Click to collapse
Please following to unlock with HTC Dev site , that provided you for all step until unlocked bootloader
Good luck
Twrp
Your TWRP link is broken :{
I can't find 2.7.0.5 for htc one mini. From the official site all they have is 2.7.0.0
Will this work?
uhhh... not sure about this mate. There is no TWRP 2.7.0.5 for this model, then I don't believe you can mount USG OTG with TWRP.
Did you test this mytohn ?
Plus do you have any un-rooted rom ?
Thanks
---------- Post added at 10:56 AM ---------- Previous post was at 10:46 AM ----------
plus, I just flash this rom with sideload and its bootlooping
BrunoWestone said:
uhhh... not sure about this mate. There is no TWRP 2.7.0.5 for this model, then I don't believe you can mount USG OTG with TWRP.
Did you test this mytohn ?
Plus do you have any un-rooted rom ?
Thanks
---------- Post added at 10:56 AM ---------- Previous post was at 10:46 AM ----------
plus, I just flash this rom with sideload and its bootlooping
Click to expand...
Click to collapse
of course I made with my device
Like I said I've got problem to flash rom then I put my device for paperweight a month
I tried to flash my device more than hundred times with many solution but its not worked
You no need to use side load , just direct flash from USB
and I just try again from last week , it completely worked such a wonderful
please check it out here , I just uploaded, but sorry for video quality that recorded from my iPod Touch
https://www.youtube.com/watch?v=JCHcZVp2jn4
Unanchored said:
Your TWRP link is broken :{
I can't find 2.7.0.5 for htc one mini. From the official site all they have is 2.7.0.0
Will this work?
Click to expand...
Click to collapse
Please find, I have re-uploaded links for TWRP 2.7.0.5
คนไทย!? ชิมิ!?
:good::good::good:
GixxGle said:
คนไทย!? ชิมิ!?
:good::good::good:
Click to expand...
Click to collapse
Yes I am
ยังไงก็รบกวนกรุณาใช้ภาษาสากล ในการใช้บอร์ดสาธารณ
เพื่อความเป็นสากล บางครั้งข้อความที่เป็นภาษาเฉพาะ เขียนตามบอร์ด inter
มันก็เป็นการกระทำที่ไม่เหมาะและไม่สุภาพครับ
ขอบคุณครับ
Could you please link the ROM download? Link in first post direct to TWRP, not to ROM file
Thanks
Nevermind now, found image else where, in this thread http://forum.xda-developers.com/showthread.php?t=2665746 used odex image.
Used your method mate and it WORKED !!! Got the usb cable from my tablet - nothing else worked, even adb push (for some reason phone just switched itself off)
Now fully working, thanks again
thequick said:
Could you please link the ROM download? Link in first post direct to TWRP, not to ROM file
Thanks
Nevermind now, found image else where, in this thread http://forum.xda-developers.com/showthread.php?t=2665746 used odex image.
Used your method mate and it WORKED !!! Got the usb cable from my tablet - nothing else worked, even adb push (for some reason phone just switched itself off)
Now fully working, thanks again
Click to expand...
Click to collapse
Links uploaded, pls find
Hi, can you be more specifict on the flash process.
So you flash the ROM from USB GTO.
Then wipe cache/dalvid cache
Then flash boot.img
Also, is that normal that when right after i flashed the rom, and shutdown the phone, its say no OS installed?
Can you upload the rom again?
Hey, can you re upload the ROM and what HBOOT do you need, will it work on 2.21?
Thanks
ziedje said:
Hey, can you re upload the ROM and what HBOOT do you need, will it work on 2.21?
Thanks
Click to expand...
Click to collapse
The link for the rom is halfway down the first page of this post' no need to upload it, it don't matter what hboot your on as the link to OP has link for rom for hboot pre 2.22 and another member has put up links for a modded version on the last pages of OP for hboot 2.22 and above. just make sure you download a twrp recovery that supports your partition layout (your hboot will give you and idea) I gather you have an OTG cable or a dual flash drive USB.
Everything and every answer you need is in these forms...you just have to read! That's how I managed to give yo this answer in under 10min of searching.
Hi there,
I got a HTC One mini. I bought an USB OTG and installed TWRP v2.7.1.2. I can see the USB OTG under "Mount" but I can't mount it. "adb sideload file-name.zip" is also not working.
Please advice.
Thanks.
What may be?
FATAL: Download updated package at www.rumrunner.us
Xeskino said:
Hi there,
I got a HTC One mini. I bought an USB OTG and installed TWRP v2.7.1.2. I can see the USB OTG under "Mount" but I can't mount it. "adb sideload file-name.zip" is also not working.
Please advice.
Thanks.
Click to expand...
Click to collapse
Format the USB flash drive in FAT32.
---------- Post added at 10:11 PM ---------- Previous post was at 10:05 PM ----------
Abzal said:
What may be?
FATAL: Download updated package at www.rumrunner.us
Click to expand...
Click to collapse
There are problems on the server, so many now
Hello to everybody!
All these things are OK:
1. Unlock device with Unlock Bootloader
2. Download ROM and Copy to Flash Drive
3. Flash recovery TWRP 2.7.0.5
But when I try flashing ROM "m4kk_4.4.2_3.10.401.4_root-odex.zip" from "Install" I get what you can see in attacked image.
Flashing lasts only three seconds. When I reboot, I get loop booting.
What I can do?
Thank for all
Help!
Hello, I have an htc one mini in state like the one in the picture (first post) stuck in bootloader (tampered, unlocked, s-on).
The only difference is that ''OS-'' section is empty!!!
I've flashed this recovery: twrp-2.7.0.5-m4kk.img using adb and then flashed this rom: m4kk_4.4.2_3.10.401.4_root-odex.zip as it is mentioned.
Everything went well and phone started in 4.4.2! Almost everything... Once I had opened the data (3g/4g) everything messed up (lag lag lag)!
I've tried to reboot via power button and after restart I stuck again to bootloader.
I've decided to flash the rom once again. This decision was harsh...
Flashing procedure never completed succesfully (interrupted by reboot) and from then till now in recovery mode the touch screen is not responding, the touch buttons neither!
So, I cannot flash nothing!
Please help me! Thanks in advance!
Thanks for the ROM!, everything went ok!
[BTW, I used Philz Recovery and also works, and got the ROM from Mega]

[SCRIPT] Moto E XT1023 super easy ROOT, RECOVERY, & RESTORE

This is a little script tool I made up for the Moto E XT1023 The Firmware restore will only work on the XT1023 but all other options should work on all the variants of the Moto E
It is really simple. But requires a unlocked bootloader video HERE If you need help with bootloader unlock
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download the Moto E Super Tool
extract the tool to your desktop
Turn on usb debugging mode on the device
install the Motorola drivers
Run the Moto E 1 Moto-E-Restore-XT1023.bat file
then just select what you want to do
1. Root your Moto E
2. Flash TWRP Recovery
3. Flash Stock Android Recovery
4. Flash CWM recovery
5. Remove the unlocked bootloader warning
6. Fully restore the Moto E to stock
7. Fully restore plus Relock the bootloader
Newest release V2
Change Log
Vision 1 first release
Version 2
updated TWRP
Updated Supersu.zip
DOWNLOAD SUPER TOOL
WIll add more to this if i have time
Hope this will help out some noobs
Is it for all the models like xt1021 nd xt1022??
zoneofSAM said:
Is it for all the models like xt1021 nd xt1022??
Click to expand...
Click to collapse
the first line of thread answers your question. variants=models
zoneofSAM said:
Is it for all the models like xt1021 nd xt1022??
Click to expand...
Click to collapse
I have tested it on the xt1023 but from what i am told it should work on all models because supersu.zip is universal and same with TWRP if i am not mistaken.
doesn't reboot into recovery
Everything seems ok during the process but when the phone reboots it stays in the Motorola logo/Android screen, never moving on to TWRP. This also happened when I tried the normal Fastboot method. Bootloader is unlocked and usb debugging is checked, of course.
Any ideas?
edit:
More info-
1. The only command that seems to work on my phone is when I install stock recovery.
2. When I go into bootloader and try to restart in any mode but normal restart I get a blank screen
3. I previously bricked my phone by doing something stupid so I reflashed one of the factory firmwares-
RETUAWS_XT1023_4.4.2_KXC20.82-15_cid9_CFC.xml
Could this be the source of my problem?
Thanks in advance!
Hi,
Thanks for your script, mate...just used it for SuperSu installation and made the rest by other way, but worked flawlessly for that, and that's the point !!! :good:
Cheerz
satanas17 said:
Hi,
Thanks for your script, mate...just used it for SuperSu installation and made the rest by other way, but worked flawlessly for that, and that's the point !!! :good:
Cheerz
Click to expand...
Click to collapse
updated tool with newest twrp and supersu
Cannot upgrade to 4.4.4
Thanks for the nice video; however I just have a problem when trying to go back to stock recovery to install the 4.4.4 update that is recently pushed to Moto E devices; I want to go back to stock recovery as it does not gets installed with any custom recovery.
I tried the said method 4-5 times but it gives me with a dead android icon when trying to get to stock recovery..
Please help me to get 4.4.4 on my device.
Yeah that is normal you have to press volume up and power on that screen to get to options
Tomsgt said:
Yeah that is normal you have to press volume up and power on that screen to get to options
Click to expand...
Click to collapse
Thanks!! it worked for me and I see the options now.. however the update still does not work :crying:
and searching and experimenting to get 4.4.4
_SGY said:
Thanks!! it worked for me and I see the options now.. however the update still does not work :crying:
and searching and experimenting to get 4.4.4
Click to expand...
Click to collapse
Update won't work if you have modded system partition in any way. Even if its just blotware uninstalled. Just flash system partition only and it should work. The .1 .2 .3 file extension files I mean
Deadly said:
Update won't work if you have modded system partition in any way. Even if its just blotware uninstalled. Just flash system partition only and it should work. The .1 .2 .3 file extension files I mean
Click to expand...
Click to collapse
You mean system.img_sparsechunk.0, system.img_sparsechunk.1, system.img_sparsechunk.2 right??
Done that already with no success.. I don't know what I am doing wrong here
No more wallpaper crashes after wipe data and cache
_SGY said:
You mean system.img_sparsechunk.0, system.img_sparsechunk.1, system.img_sparsechunk.2 right??
Done that already with no success.. I don't know what I am doing wrong here
Click to expand...
Click to collapse
Updated Yippeeeeee...
The issue was my rooted device, I had to unroot, install stock ROM as I had removed plenty of bloatware..update success, re-root and enjoy!!!!
Posting steps to benefit someone who may be facing the same issue as I was..
Hey guys. My little brother just got a Moto E, and I'm trying to get it rooted/Recovery'd.
I'm using your toolkit, but so far, no luck. Doesn't want to root, nor install recovery. It's stuck on "waiting for device".
I don't know what's wrong. I checked that USB debugging was on, and he unlocked his bootloader earlier. Everything should be fine.
But, it doesn't work.
Could someone provide some help, please ?
Thanks.
Did you extract the zip to your desktop? And are the right drivers installed also try using a different USB cable or port.
Demonseye said:
Hey guys. My little brother just got a Moto E, and I'm trying to get it rooted/Recovery'd.
I'm using your toolkit, but so far, no luck. Doesn't want to root, nor install recovery. It's stuck on "waiting for device".
I don't know what's wrong. I checked that USB debugging was on, and he unlocked his bootloader earlier. Everything should be fine.
But, it doesn't work.
Could someone provide some help, please ?
Thanks.
Click to expand...
Click to collapse
Did u connected mobile in bootloader ? Try t
sham4u2sam said:
Did u connected mobile in bootloader ? Try t
Click to expand...
Click to collapse
Yeah, I tried it. Weird thing is that we reconnected it to his computer, and the script recognized his phone, while my PC did not. Everything went smooth. Thanks.
Recovery.img is for 4.2(for option stock recovery)
But my moto e is 4.4.4
Will it work???
And also
One advice
Plz include flash stock firmware to your your script
And don't add drivers to in your zip file make a separate link for driver.
Hope you like my suggestions and include it in your next update
Any how i looked your bat file
You looks a good programmer
---------- Post added at 11:01 PM ---------- Previous post was at 10:20 PM ----------
Request for new menu
1.root your phone
2.flash twrp
3.flash stock recovery 4.4.4
4.unlock boot loader(where it only ask to enter unlock key)
5.remove bootloader unlocked warning
6.install stock firmware or rom(where it flash frimware placed in frimware folder)
7.lock your boot loader and install orignal 4.4.4 recovery to get warranty back
Hit thanks if you like to include these options in next update
hard91 said:
Recovery.img is for 4.2(for option stock recovery)
But my moto e is 4.4.4
Will it work???
And also
One advice
Plz include flash stock firmware to your your script
And don't add drivers to in your zip file make a separate link for driver.
Hope you like my suggestions and include it in your next update
Any how i looked your bat file
You looks a good programmer
---------- Post added at 11:01 PM ---------- Previous post was at 10:20 PM ----------
Request for new menu
1.root your phone
2.flash twrp
3.flash stock recovery 4.4.4
4.unlock boot loader(where it only ask to enter unlock key)
5.remove bootloader unlocked warning
6.install stock firmware or rom(where it flash frimware placed in frimware folder)
7.lock your boot loader and install orignal 4.4.4 recovery to get warranty back
Hit thanks if you like to include these options in next update
Click to expand...
Click to collapse
challenge excepted LOL Moto E Super Tool
Your Option 4 isnt going to happen

[Q] Upgrading to Android 5.0

Hi all,
I got the message about upgrading the OS to 5.0.
When I try to upgrade, It starts to download a file, and the the device is restarted.
Then, instead of automatically begin the installation, I get some menu (construced of several rectangle buttons).
One of them is "Install".
When I press it, it asks me to find a zip file.
What file and where is it???
Thanks, Tal.
dushkin said:
Hi all,
I got the message about upgrading the OS to 5.0.
When I try to upgrade, It starts to download a file, and the the device is restarted.
Then, instead of automatically begin the installation, I get some menu (construced of several rectangle buttons).
One of them is "Install".
When I press it, it asks me to find a zip file.
What file and where is it???
Thanks, Tal.
Click to expand...
Click to collapse
Do you have a custom recovery? If so you will have to flash a stock recovery and install the file.
Thanks
tevil said:
Do you have a custom recovery? If so you will have to flash a stock recovery and install the file.
Click to expand...
Click to collapse
Tevil, how can I know which recovery version do I have?
Thanks!
dushkin said:
Tevil, how can I know which recovery version do I have?
Thanks!
Click to expand...
Click to collapse
This is how stock recovery looks like when you enter recovery mode.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I think you havr custom recovery, because there is no option in stock recovery for selecting a zip file. I also have to ask are you using stock rom and are you unrooted?
Well, I have this image, larger than in yours. At the top thre is a large arrow with several options inside it: power off, recovery mode, restart bootloader, and start
Also, the next info:
product name: hammerhead D820
Will the kernel version help here?
3.4.0-gd59db4e
[email protected] #1
Build Number KTU84P
Sorry for not being a pro and answer your question straight away... Thank you for your assitance.
dushkin said:
Well, I have this image, larger than in yours. At the top thre is a large arrow with several options inside it: power off, recovery mode, restart bootloader, and start
Also, the next info:
product name: hammerhead D820
Will the kernel version help here?
3.4.0-gd59db4e
[email protected] #1
Build Number KTU84P
Sorry for not being a pro and answer your question straight away... Thank you for your assitance.
Click to expand...
Click to collapse
I know where you are. Thats the bootloader.
Thats when you power on holding the volume down button and power at the same time.
Use the volume buttons until the arrow says "recovery" then hit power. It should boot into whatever recovery you have.
Prob TWRP
Ok, so I have the "Team Win Recovery Project" 2.7.1.1
And I am rooted (checked with "Root Checker" app
I'll be happy if you can help, but anyway I sent them a message (hopefully they will answer sometime...)
Where did the ota download to do you know? If not then try to find the ota zip on these XDA forums. Then when you are at twrp main screen choose install zip, browse to where you downloaded the ota zip on your phone (check downloads folder) then choose it and swipe to install. Once that is done (it could take some time, be patient) then choose wipe cache or something I can't remember exactly what it says, after that's done reboot using the button on the screen. Don't manually reboot. You should be upgraded to lollipop now
ek69 said:
Where did the ota download to do you know? If not then try to find the ota zip on these XDA forums. Then when you are at twrp main screen choose install zip, browse to where you downloaded the ota zip on your phone (check downloads folder) then choose it and swipe to install. Once that is done (it could take some time, be patient) then choose wipe cache or something I can't remember exactly what it says, after that's done reboot using the button on the screen. Don't manually reboot. You should be upgraded to lollipop now
Click to expand...
Click to collapse
I searched and did not find any relevant zip file. I even did not find ny file which is above 400M, as I remember that was the size of the download...
Maybe the OTA process do not download a zip file, but another type of a file??
Check the /cache folder using es file explorer not your computer
You might need root
Or just download the newest ota zip it's probably available in a thread here on XDA search for it
dushkin said:
Ok, so I have the "Team Win Recovery Project" 2.7.1.1
And I am rooted (checked with "Root Checker" app
Click to expand...
Click to collapse
How do you not know this to start?
Follow this post it's the easiest guide I found.
http://forum.xda-developers.com/showthread.php?t=2513701
It's gonna wipe your phone clean so back up pics, files, music, etc first. If you want to root after then there's a guide on that to in XDA.
Don't use any toolkits etc that is probably how you ended up with twrp recovery and didn't even know it lol learn the proper commands and use only those commands
---------- Post added at 07:27 PM ---------- Previous post was at 07:25 PM ----------
Wakamatsu said:
How do you not know this to start?
Click to expand...
Click to collapse
Lol I know right I'm guessing some toolkit was involved or something.
dushkin said:
Ok, so I have the "Team Win Recovery Project" 2.7.1.1
And I am rooted (checked with "Root Checker" app
I'll be happy if you can help, but anyway I sent them a message (hopefully they will answer sometime...)
Click to expand...
Click to collapse
Thats TWRP, you need to put your phone fully back to stock to install 5.0 then re root and reflash TWRP back on.
bitdomo said:
This is how stock recovery looks like when you enter recovery mode.
I think you havr custom recovery, because there is no option in stock recovery for selecting a zip file. I also have to ask are you using stock rom and are you unrooted?
Click to expand...
Click to collapse
He's obviously rooted if he has custom recovery
Sent from my LG-D850 using XDA Free mobile app
---------- Post added at 05:07 PM ---------- Previous post was at 05:06 PM ----------
tevil said:
Thats TWRP, you need to put your phone fully back to stock to install 5.0 then re root and reflash TWRP back on.
Click to expand...
Click to collapse
You can't accept oa update if you are rooted with custom recovery. Your lucky you didn't brick your phone. Out of curiosity, how can you not know if you are rooted or have custom recovery.
Sent from my LG-D850 using XDA Free mobile app

[TOOL] Mi Toolkit V4 (Root, TWRP + Stock Recovery, IMEI Backup)

Because Manu11 didn't update his thread about the toolkit. I decided to post this to help Mi 4i users that got into trouble with TWRP unable to flash dh.harald's CM12.1
FEATURES
-Root (MIUI only, CM users can enable Root in Developer Options) Working on MIUI7 (thanks to @ss.suryakant95 for testing this out)
-TWRP Recovery
-Stock Recovery (just in case)
-EFS (IMEI) Backup and Restore
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DOWNLOAD
(Some users had problems unzipping this ZIP with WinRAR, consider using free alternatives such as 7-zip)
MAIN URL: Click here to download (Please use this download, but if in any case you can't extract, you may use the mirror I provided.)
MIRROR: Click here to download.
HOW-TO
1. Enable Developer Options (Tap MIUI version 7 times in About Phone), and then in Developer Options, enable USB debugging.
2. Have you downloaded the ZIP? No? Download it, now.
3. Extract the downloaded ZIP wherever you like, keep in mind that all files must be kept together.
4. Connect your phone to the PC.
5. Run the Start.bat file.
ATTENTION: Please do a ROOT (I'll assume you're still in MIUI) before you flash TWRP, or you may be brought back into stock recovery. (Thanks to @omerjerk for testing this)
---
UPDATE: This toolkit's TWRP is deprecated (download the newest version here), but if you don't want to hassle with downloading another fastboot driver, you can still download dh.harald's recovery .img file, and copy your downloaded recovery to the extracted toolkit folder, then change dh.harald's recovery filename into twrp.img (UNTESTED)
I'll repack this toolkit with dh.harald's newest TWRP whenever possible.
---
This toolkit is made by magdag, all credits goes to him.
i'm getting error on extracting the zip file. can you re-upload plz
aloknand said:
i'm getting error on extracting the zip file. can you re-upload plz
Click to expand...
Click to collapse
don't use winrar...use 7zip to extract
aloknand said:
i'm getting error on extracting the zip file. can you re-upload plz
Click to expand...
Click to collapse
I've provided mirror in OP.
chikebum said:
don't use winrar...use 7zip to extract
Click to expand...
Click to collapse
hey thanks. extracted using 7-zip. :good:
any chance on getting updated twrp recovery or official support of twrp recovery?
milav said:
any chance on getting updated twrp recovery or official support of twrp recovery?
Click to expand...
Click to collapse
I can't speak for magdag, the dev. So, this is literally the version that is usable for flashing TWRP.
I don't expect any official support for TWRP. And I prefer CWM, if there's one.
does any one know to do a nandroid backup with twrp????? mines turning out to be 35mb!
krome_3k said:
does any one know to do a nandroid backup with twrp????? mines turning out to be 35mb!
Click to expand...
Click to collapse
Backup everything (all partitions) except the first in the list.
You may want to use the compression.
The backup should be somewhere between 3.5GB and 5.5GB depending on the options and the data.
You could install ROM Manager (from Koushik Dutta) from the Play Store.
Choose the TWRP as recovery and Unknown Device as device.
Then you can use this to backup with TWRP and it will choose the right options for you.
elot01 said:
Backup everything (all partitions) except the first in the list.
You may want to use the compression.
The backup should be somewhere between 3.5GB and 5.5GB depending on the options and the data.
You could install ROM Manager (from Koushik Dutta) from the Play Store.
Choose the TWRP as recovery and Unknown Device as device.
Then you can use this to backup with TWRP and it will choose the right options for you.
Click to expand...
Click to collapse
bro got my device soft bricked.. i think. the phone boots directly to twrp and twrp is unable to flash the official rom zip which i downloaded from the xiaomi website [miui_MI4iGlobal_V6.6.10.0.LXIMICF_80f20c0908_5.0.zip]. i think the only option i have is to flash a rom via fastboot but the when i download the fastboot rom [http://www.technobuzz.net/flash-miui-6-stable-rom-on-brickeddead-mi-4i-with-fastboot-mode/] nothing happens. i get a 503 error. does anybody out there have the fastboot rom for this device???
EDIT : tried flashing again phones working now but still does anyone have the fastboot rom??
krome_3k said:
bro got my device soft bricked.. i think. the phone boots directly to twrp and twrp is unable to flash the official rom zip which i downloaded from the xiaomi website [miui_MI4iGlobal_V6.6.10.0.LXIMICF_80f20c0908_5.0.zip]. i think the only option i have is to flash a rom via fastboot but the when i download the fastboot rom [http://www.technobuzz.net/flash-miui-6-stable-rom-on-brickeddead-mi-4i-with-fastboot-mode/] nothing happens. i get a 503 error. does anybody out there have the fastboot rom for this device???
EDIT : tried flashing again phones working now but still does anyone have the fastboot rom??
Click to expand...
Click to collapse
Just Google it. Seriously. Or go to MIUI Forums and see the options you got there, there should be plenty of MIUI Fastboot ROM since 6.5.6
Kreaz said:
Just Google it. Seriously. Or go to MIUI Forums and see the options you got there, there should be plenty of MIUI Fastboot ROM since 6.5.6
Click to expand...
Click to collapse
i posted after extensive googling. the only problem i faced was that the fastboot rom was undownloadable. but got the job done using twrp after it failed multiple times.
krome_3k said:
i posted after extensive googling. the only problem i faced was that the fastboot rom was undownloadable. but got the job done using twrp after it failed multiple times.
Click to expand...
Click to collapse
I have 6.6.5.0 as fastboot rom available.
For another person i already made a link available via Dropbox.
Here is the link (will keep it available till the end of the week): https://dl.dropboxusercontent.com/u/63898882/ferrari_global_images_V6.6.5.0.LXIMICF_20150521.0000.3_5.0_global_5ef519a03a.tgz
Thanks
Working like charm on MIUI7
ss.suryakant95 said:
Thanks
Working like charm on MIUI7
Click to expand...
Click to collapse
Is it the root or the twrp flashing?
Kreaz said:
Is it the root or the twrp flashing?
Click to expand...
Click to collapse
Both root and twrp
I've MiUi 6.6.10 on my device.
I used this toolkit to flash twrp but I'm not able to do so.
Whenever I select the 2 option, it flashes the recovery successfully. But, when I boot to recovery again using adb reboot recovery, I get the stock recovery and not twrp.
What I'm doing wrong ?
P.S. I haven't rooted the phone yet.
---------- Post added at 08:21 PM ---------- Previous post was at 08:14 PM ----------
omerjerk said:
I've MiUi 6.6.10 on my device.
I used this toolkit to flash twrp but I'm not able to do so.
Whenever I select the 2 option, it flashes the recovery successfully. But, when I boot to recovery again using adb reboot recovery, I get the stock recovery and not twrp.
What I'm doing wrong ?
P.S. I haven't rooted the phone yet.
Click to expand...
Click to collapse
It worked after root.
I think it should be added in the main post that root is required.
Hi
Not able to restore stock recovery with the toolkit. I've tried to flash stock.img manually in fastboot., but not able to get into stock recovery even fastboot show succeeded.
elot01 said:
I have 6.6.5.0 as fastboot rom available.
For another person i already made a link available via Dropbox.
Here is the link (will keep it available till the end of the week): https://dl.dropboxusercontent.com/u/63898882/ferrari_global_images_V6.6.5.0.LXIMICF_20150521.0000.3_5.0_global_5ef519a03a.tgz
Click to expand...
Click to collapse
sorry bro i missed the download can u reupload it please???
krome_3k said:
sorry bro i missed the download can u reupload it please???
Click to expand...
Click to collapse
I am at work at the moment, so you wil have to wait until tonight.

[recovery][lm-g710em]twrp 3.2.1[persistent]

[UNOFFICIAL] TWRP 3.2.1 for LM-G710EM ONLY
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​
NOTE
There are 2 versions for this recovery, SEMI-PERSISTENT & PERSISTENT.
1. Semi-Persistent Recovery
[Works on stock rom and custom rom] Not permanent, requires command in order to boot and needs to reflash it every time you need it and then reflash stock boot.img after using it in order to avoid bootloop.
2. Persistent Recovery
[Works only on custom rom] Permanent, you can boot on it anytime without a command and doesn't need to reflash it and stock boot.img.
Flashing TWRP Recovery
Downloads:
[SEMI-PERSISTENT] TWRP 3.2.1
[PERSISTENT] TWRP 3.2.1
1. You need to be rooted first. Root Guide: Magisk
2. Flash TWRP image (Download link above) using the following command:
Code:
fastboot flash boot_a pathtoimghere
and
Code:
fastboot flash boot_b pathtoimghere
Note: In this state, you will encounter bootloop when you restart your device and proceed to OS. So please, don't.
3. Boot to recovery using the button combination (VOLUME DOWN + POWER BUTTON).
4. Once you are booted in TWRP, you might notice that /date doesn't work. To fix it, you need to decrypt your phone.
For now, flash the vendor.img found here.
5. After step #4, Hit Wipe and Format Date on TWRP, type yes in the dialog, and then reboot to recovery (not system). TWRP will now be useful.
6. If you are on 10f or 10h stock rom download this TWRP then mount vendor and system, flash the zip through TWRP to enable semi-persistant.
SUPPORT
If you need any help for this or in general or if you just want to have a chit chat, feel free to join our Telegram Group:
LG G7 ThinQ XDA Community Telegram Group
Others:
Official LG G7 Subreddit
LG Community Discord
CREDITS
Me (for the initial G7 TWRP device tree)
Rashed97 (for his great help to make me understand how recovery works on a/b devices)
Skullpluggery (for polishing the thread)
I hope i didn't forgot anyone , if i did im sry , hit me up and i will add you here.
Why is this TWRP semi persistent
So The g7 is a a/b device meaning it has 2 system paritions etc , but it doesnt have a recovery parition anymore so recovery is now a binary inside of boot.img which gets executed when hitting the button combo , but to have to you need to flash the boot.img containing it , and thats the point the boot.img containig twrp isnt compatible neither to aosp nor to stock meaning your phone would probably stuck in a bootloop or a reboot loop , so only thing we can do for now is flashing back our boot.img after were done with twrp, im working on it and i was able to smack twrp into the stock boot.img but it doesnt work correctly anymore then , I've finished my work on a variant that works without a pc needed
Persistance reached us , YAY
This is ONLY for AOSP OREO AND PIE flash this bootimage using fastboot flash boot_a pathtoimg or fastboot flash boot_b pathtoimg
Then TWRP will be always present no annoying flashes anymore
Can I flash normal zip files with recovery? because not everything is supposed to go.
Sony92 said:
Can I flash normal zip files with recovery? because not everything is supposed to go.
Click to expand...
Click to collapse
yes you can do everything once your decrypted , this twrp just wont stick
can someone please tell me if i have the buttons before warning that the bootloader is unlocked or after the warning? it's about booting to recovery after flashing the recovery.img. Unfortunately, I did not manage it yesterday.
should you flash at step 4 the file on the recovery, or via adb sideload?
hello mate long time no chat lol thinking of getting the g7 got one plus 6 at min will the fix for the one plus that makes the recovery stick work on this ?
will the error be corrected over time? because after the first reboot into the system the recovery disappeared again. I would like to boot again into recovery after being in the system, it no longer exists. I followed everything according to instructions
strikerdj2011 said:
hello mate long time no chat lol thinking of getting the g7 got one plus 6 at min will the fix for the one plus that makes the recovery stick work on this ?
Click to expand...
Click to collapse
damn youre still alive good to talk again , no that is only for the op6 , but this is my first work for a/b but meanwhile i got a main idea what to do , all i need rn is a linux machine
Sony92 said:
will the error be corrected over time? because after the first reboot into the system the recovery disappeared again. I would like to boot again into recovery after being in the system, it no longer exists. I followed everything according to instructions
Click to expand...
Click to collapse
thats what non persisrant mean youi always have to flash the recovery boot.img first
Great to know development is picking up on this device. Waiting for supplies to hit the rest of the world so I can get an European variant. ** Thumbs Up **
stupid question but does the locked bootloader on usa versions disallow booting unsigned images over "fastboot boot" command also?
just got a g7 what we going to cook up this year
strikerdj2011 said:
just got a g7 what we going to cook up this year
Click to expand...
Click to collapse
Not much afaik, im missing a linux server to build stuff and noone is pickung up g7 for development exept me till now so there is not much to do
J0SH1X said:
Not much afaik, im missing a linux server to build stuff and noone is pickung up g7 for development exept me till now so there is not much to do
Click to expand...
Click to collapse
**** that mate
---------- Post added at 07:49 PM ---------- Previous post was at 07:34 PM ----------
strikerdj2011 said:
**** that mate
Click to expand...
Click to collapse
J0SH1X said:
Not much afaik, im missing a linux server to build stuff and noone is pickung up g7 for development exept me till now so there is not much to do
Click to expand...
Click to collapse
whats going rate for a linux server
J0SH1X said:
Not much afaik, im missing a linux server to build stuff and noone is pickung up g7 for development exept me till now so there is not much to do
Click to expand...
Click to collapse
Hi.
As a developer, do you think it is possible enable HDMI out via kernel update?
https://forum.xda-developers.com/lg-g7-thinq/help/usb-c-to-hdmi-t3809408
Thanks.
Sent from my LM-G710 using Tapatalk
ricxgp said:
Hi.
As a developer, do you think it is possible enable HDMI out via kernel update?
https://forum.xda-developers.com/lg-g7-thinq/help/usb-c-to-hdmi-t3809408
Thanks.
Sent from my LM-G710 using Tapatalk
Click to expand...
Click to collapse
no i cant build any kernel im no kernel dev also g7 kernel sources are badly broken they dont boot and give no logs so were out of luck
J0SH1X said:
no i cant build any kernel im no kernel dev also g7 kernel sources are badly broken they dont boot and give no logs so were out of luck
Click to expand...
Click to collapse
another year another ****ed up source from lg
J0SH1X said:
no i cant build any kernel im no kernel dev also g7 kernel sources are badly broken they dont boot and give no logs so were out of luck
Click to expand...
Click to collapse
Thanks.
It is a shame what LG does...
I am really thinking about sell the LG G7, I really like the phone but this kind of thing are shamelessl...
Sent from my LM-G710 using Tapatalk
ricxgp said:
Thanks.
It is a shame what LG does...
I am really thinking about sell the LG G7, I really like the phone but this kind of thing are shamelessl...
Sent from my LM-G710 using Tapatalk
Click to expand...
Click to collapse
exactly my thought awesome device but zero support from lg even q6 with is mid/low got 8.1

Categories

Resources