{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS 13.0 is a free, community built, aftermarket firmware distribution of Android 6.0 (MM), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Known Issues / NOT working / "Bugs"
* Search the thread!
* You tell me! (See "Other Issues")
Everything else WORKS, do NOT ask if anything (feature, function, ...) specific is working or not (Search the thread if you want to make sure and if you don't find it: test it yourself)
Other Issues?
Before posting on this thread, make sure of a few things:
You've utilized the search function of the forums. Nothing irritates us more than lazy people who do not search for an answer before asking or ask the same question over and over again.
If you are the only one having a problem: boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
LOGS LOGS LOGS!!!! Use this: SysLog by Tortel
If you have a hard reboot (to the vendor boot logo, not the LineageOS boot logo), use adb or any other file explorer tool to pull a copy of "console-ramoops" or "last_kmsg" after the reboot and provide that.
Code:
adb pull /sys/fs/pstore/console-ramoops
Code:
adb pull /proc/last_kmsg
Note: We will not support any kind of modification on the ROM not done by our sources. If you are running XPosed, Kernel Booster or whatever occurs to you, we won't support you in any way. The problem will in every case be treated as the additional softwares' fault (because often it is!)
Google apps addon:
(Note: Not required to run the ROM)
We are using Open GApps (Link) Arm version, others might also be working
Note: In case you want to use any gapps, YOU MUST install the right gapps the first time that you flash a marshmallow ROM. Do not boot with an older gapps or without one and then try to install it later.
Note: If you install a package which replaces the default dialer (mostly "Stock Gapps") you have to go to Settings->Apps->Gear-Icon and set the new dialer as a default telephony app to prevent force closing of apps
Download Links
download.crpalmer.org
XDA:DevDB Information
LineageOS 13.0 for MondrianLTE (Unofficial), ROM for the Samsung Galaxy Tab Pro 12.2, 10.1, 8.4
Contributors
crpalmer
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Nightly
Created 2016-02-14
Last Updated 2017-01-26
Reserved
http://review.cyanogenmod.org/#/c/128966/
You sir are a gent! Am I correct in assuming that mobile data is working in your build?
RavenY2K3 said:
You sir are a gent! Am I correct in assuming that mobile data is working in your build?
Click to expand...
Click to collapse
You or someone else has to tell me. I don't own this device. It does work on the sm-t525 that I do own and test on.
Dirty flashed about an hour ago from your 12.1
All ok (data working, wifi working etc etc) but I'm plagued by constant pop-up saying
Unfortunately Google play has stopped working
In fact if I try to go into my account > Google or open play store I just get a blank screen. Tried everything ordinary like clearing data and cache for Google play store and services but it doesn't fix. I will leave clean flash as last resort.. If someone has an idea on what I should try please shoot
Sent from my SM-T325
Cissiboy said:
Dirty flashed about an hour ago from your 12.1
All ok (data working, wifi working etc etc) but I'm plagued by constant pop-up saying
Unfortunately Google play has stopped working
In fact if I try to go into my account > Google or open play store I just get a blank screen. Tried everything ordinary like clearing data and cache for Google play store and services but it doesn't fix. I will leave clean flash as last resort.. If someone has an idea on what I should try please shoot
Sent from my SM-T325
Click to expand...
Click to collapse
You probably did not flash 6.0 gapps when you upgraded. You must do that when you first install a 6.0 based ROM. AFAIK, you will need to factory reset or go back to a 12.1 backup and try again installing the new gapps at the same time as you flash CM 13.
boot
Hello, crpalmer
Correct please in the following assemblies, in fstab.qcom kernel for normal operation of the memory stick.
crpalmer said:
You probably did not flash 6.0 gapps when you upgraded. You must do that when you first install a 6.0 based ROM. AFAIK, you will need to factory reset or go back to a 12.1 backup and try again installing the new gapps at the same time as you flash CM 13.
Click to expand...
Click to collapse
I managed to save my ass from clean flash.
Wipe dalvik/cache/system/internal
Flash at the same time rom+opengapss Micro +xposed +supersu
Before booting, Mount system and from recovery file manager delete cmsetupwizard folder
Boot
Profit.
I will give my feedback tomorrow or the day after.
Silky smooth at first impression
Sent from my SM-T325 using Tapatalk
Installed it yesterday with open Gapps. Works perfect! Beside the terrible App Drawer (but not your fault of course) I'd like to thank you for your work. How can I buy you a beer?
EDIT: Found your PP ID. Sent you some beer. Thank you!
I have a problem with the trebuchet launcher.
In main screen I cant change to landscape forma.
Is it normal that I cant change the look of the trebuchet app drawer? Thats looking just terrible. Hate it
If I use Nova Launcher I can change to landscape in the main screen and the app drawer looks also much better. Anyone else having this problem:
external sd card
Thank you!
Everything is smooth and working, except one thing: the external sd card.
It formatted as external, detected, mounted at /storage/716D-1303. I can explore it with root browser. I can see the status bar notification "SanDisk SD card for transfering photos and media" and explore the card by clicking on this notificaition.
But no app can see it. ES File Exprorer shows only the internal storage. Gallery can't see any pics from the external SD. When I connected to PC as MTP, I can see only the internal card.
akry said:
Thank you!
Everything is smooth and working, except one thing: the external sd card.
It formatted as external, detected, mounted at /storage/716D-1303. I can explore it with root browser. I can see the status bar notification "SanDisk SD card for transfering photos and media" and explore the card by clicking on this notificaition.
But no app can see it. ES File Exprorer shows only the internal storage. Gallery can't see any pics from the external SD. When I connected to PC as MTP, I can see only the internal card.
Click to expand...
Click to collapse
flash in TWRP -
promeo123 said:
flash in TWRP -
Click to expand...
Click to collapse
Solved! Now the sdcard1 is visible for everyone including PC. Thank you.
Is this a permanent thing? Will future nightlies not overwrite this boot image?
Edit: Never mind, the referred to file no longer needed in the latest nightly. External micro SD card functionalities back to normal. Thanks OP.
my feedback is very simple: EVERYTHING IS PERFECT !
battery last way longer than lollipop thanks to doze/aggressive doze
Just installed the 0220 nightly with OpenGApps. Everything seems to work great (but I didn't test radio yet). Thanks to crpalmer for your work!
However, I've got one problem: The contacts apps does not display my contacts, and on the Google accounts page in settings, contacts aren't listed. The phone app and also two differrent contacts apps from play store don't see any contacts. Gmail, however, uses my contacts when writing a new mail. Notes, calendar and so on synchronize perfectly.
Any ideas?
Oliver.D said:
Just installed the 0220 nightly with OpenGApps. Everything seems to work great (but I didn't test radio yet). Thanks to crpalmer for your work!
However, I've got one problem: The contacts apps does not display my contacts, and on the Google accounts page in settings, contacts aren't listed. The phone app and also two differrent contacts apps from play store don't see any contacts. Gmail, however, uses my contacts when writing a new mail. Notes, calendar and so on synchronize perfectly.
Any ideas?
Click to expand...
Click to collapse
Try to use this GAPPS. It can work with AOSP Contacts or Google Contacts.
http://forum.xda-developers.com/android/software/app-minimal-gapps-gapps-lp-20150107-1-t2997368
(gapps-601-base-20160220-1-signed.zip)
But AOSP Calendar will have the problem like Contacts.
So you can use Google Calendar to replaces AOSP Calendar.
2016/02/23:
Testpen_gapps-arm-6.0-micro-20160222.zip
All good.
Thank crpalmer make this rom for LTE version. ALL GOOD.
Many thanks for the great job!
Is there anyway to activate the google now on tap function? I can't find it in the google now setting. Many thanks.
Thank you very much for this fantastic ROM.
One question, if i´want to install the newest nightly do i also have to reinstall GAPPS everytime ore is it o.k. to flash only the nightly and GAPPS is still o.k?
Thank you.
Related
Temasek's UNOFFICIAL CM13.0 BUILDS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I will attempt to get builds out as soon as Temasek releases a new version, however due to commitments i may miss a release. I will not upload a ROM until i have flashed it myself. Please report any bugs or issues that you see; when applicable, Thank you.
DISCLAIMER
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
This thread is currently under maintenance. Should there be any inaccurate information, please PM me. Images and formatting will be handled at a future date.
...not ready yet
A WORKING version TWRP is required i use Official TWRP 3.0.2-0
Clean Install
1. Download the appropriate ROM using links provide in the second post.
2. Download the appropriate GApps following the links in the second post.
3. Ensure you’re on the latest vendor image from google - https://developers.google.com/android/nexus/images
3. Back up any and all important data.
5. WIPE DALVIK/CACHE/DATA/FACTORY RESET.
6. WIPE SYSTEM. <<-- You don't have to do this unless you want too
7. Flash the ROM in recovery.
7.1. DO NOT FIX PERMISSIONS AFTER FLASHING, doing so will cause a bootloop.
8. Flash the GApps.
9. Reboot Device.
Dirty Flash
1. Download the appropriate ROM using links provide in the second post.
2. WIPE CACHE/DALVIK. (I find wiping /SYSTEM can stop some issues with play store F/C’s)
3. Install the zip from recovery.
4. Install GApps (ensure that they are from the same build, otherwise you must do a clean installation when using a newer GApps package)
3.1. DO NOT FIX PERMISSIONS AFTER FLASHING, doing so will cause a bootloop.
5. Reboot Device.
probably something i havn't found as yet
@temasek
CM Team, CyanogenMod
Source
CyanogenMod
Kernel Source
Joshndroid
Device Tree
Temasek
Rom Source
Changelogs
https://github.com/temasek/Changelogs/blob/cm-13.0/cm_hlte-Changelog.txt
Shared Google Drive Device Folder (have Rom shared directly to your Google Drive Folder - see 3rd post)
see here for further - http://forum.xda-developers.com/showpost.php?p=66531156&postcount=3
Basketbuild Downloads - Backup Download Location (OR for those not in Google Shares)
https://s.basketbuild.com/devs/Joshndroid/Temasek Roms/bullhead
GApps - Marshmallow GApps Package
http://opengapps.org/
I have be extremely pleased with Open Gapps and you can even download daily packages, I have tried the micro, mini and nano packages with good success so far - All credit to their team and original thread source can be found here for important information and updates - http://forum.xda-developers.com/android/software/pa-gapps-continuation-t3098071
SuperSU for flashing via recovery - Credit to Chainfire
http://download.chainfire.eu/supersu
Google Drive Shared Downloads Please read if interested
Rules -
1. I WILL NOT be keeping your PM or your email address anywhere once you have been added to the share, i WILL be respecting privacy so I expect the same in return.
2. I WILL however, be creating a google doc (probably in each rom folder) to signify by XDA username only who is in the share. (This is for a couple reasons, 1 - because I can keep track of who I have added to the share, 2 - people can see if they have been added or not to the share to either remind, 3 - It keeps people accountable when their, somewhat, online identity is linked to something.)
3. Do NOT spam me with PM's if I dont get to add you within a day. I am very active on the forums due to mobile access, but to add to the share I will need to be at home. If you have not been added and see your username in the google doc after 2 days, politely PM me again.
4. If you do not use the below template (as it has all the information I will be requiring on my end to add you), You wont be added (so 2 days will pass, you wont see your name or a rom and then check the info u sent me).
5. First download for yourself is going to be rather big (about 4 roms worth). I want to keep atleast a couple roms in the share so that if something is wrong, I can pull a download or whatever at it will not affect anything to severely.
6. You will not have any access to modify or delete the files. I am the owner and you guys will only be able to download/view (which is all you need).
Okay so how can you let me know your in.
First PM me using this template:
XDA Username -
Email (google drive account) -
Rom -
Devices (some have more than one) -
I will add you to the share, I will add you to the local google doc, you will get a device folder and your files will start to sync locally to your PC.
Couple quick FAQ's
How do you know when a new rom is on the share?
You could check it manually, I also was toying with a solution that I could share within the drive that would conduct periodic checks, problem is is that it would rely on a generated file as well as direct links (something that is hard to come by on file sharing services to firstly predict and script & usually requires you to manually click a share button to get a link).
However, there is a google chrome based extention that will notify you by tracking a folder when something new has been added to a google drive folder - https://chrome.google.com/webstore/detail/folder-notifications-for/pamfobflonhoblkekglgpplpibfnckna
This will only track and send an email based on tracking 1 folder.
I am looking into the paid version myself ($2 - http://ez34.net/ezdrive/folder-notif) that will track 10 folders (which is a lot).
Why don't you use the OTA app functionality?
The OTA app, while great seems to be an on/off thing. I have it set to the correct file locations but it seems it works for some of my devices and not for others. I have tried changing to other branches of the apps to no avail. It just doesn't seem stable enough, remember im working with 6 devices at the moment.)
Can I get roms from the other locations?
Yes. I have done this setup to quicken my workflow to get roms out, the quicker you guys get them, the happier you's are. Now the primary issue I have it sync'ing to other file services to ensure I limit my bandwidth in uploading (to reduce wait times) and to keep things concurrent across. If i upload to google drive first and sync to other locations on my end, its quicker than me manually uploading to locations
one more
For reference... rom is built with UBERTC 4.9 for rom base, kernel is built with UBERTC 5.3..... i do use franko kernel myself though
Thanks so much! Trying this now...
Appreciate your time bringing this to us!
Downloading.....yeah.
Sent from my Nexus 5X using Tapatalk
Zip file is not available for downloading.
Harthouse said:
Zip file is not available for downloading.
Click to expand...
Click to collapse
try again..
sometime your browser cant handle the %20 that is populated within the space in the URL...
i have deleted the %20 and it works fine, FWIW it worked fine for me before that anyway
This is what I'm talking about...
Harthouse said:
This is what I'm talking about...
Click to expand...
Click to collapse
that is an issue with your setup.. downloading just fine for me either way - direct link from basketbuild - https://s.basketbuild.com/uploads/d...head/cm-13.0-20160424-UNOFFICIAL-bullhead.zip
how i can installer viper4android? it always says.. Installed succesfull then i reboot and then again.. Please Install, Install Successfull... Reboot and again
Does this ROM come force encrypted?
通过我的 Nexus 5X 上的 Tapatalk发言
after installation i cannot pull down ststus bar
it only comes half way
Rom running great!!
ericgaebel said:
how i can installer viper4android? it always says.. Installed succesfull then i reboot and then again.. Please Install, Install Successfull... Reboot and again
Click to expand...
Click to collapse
Make sure you only have these two in system/vendor/ect.
Sent from my Nexus 5X using XDA-Developers mobile app
shindiggity said:
Make sure you only have these two in system/vendor/ect.
View attachment 3731178
Sent from my Nexus 5X using XDA-Developers mobile app
Click to expand...
Click to collapse
Thank you for your reply @shindiggity
I have only these two files in vendor/etc/ ... But dont effect anything to viper..
Same Problem..
ericgaebel said:
Thank you for your reply @shindiggity
I have only these two files in vendor/etc/ ... But dont effect anything to viper..
Same Problem..
Click to expand...
Click to collapse
Try this one, just flash.
http://forum.xda-developers.com/attachment.php?attachmentid=3431648&d=1438967541
Thank you @shindiggity! I'll just try it out now
Nvm i got it too work lol
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is only for all the MOTO E 2015 LTE variant. Don't try it on anything else.
LineageOS is a free, community built, aftermarket firmware distribution of Android 8.0.0 (Oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Working
Boots
RIL (Calls, SMS, Data)
Wifi
Bluetooth
Camera
Mp3 Playback
Video Playback
Not Working/Bugs
Camera
VoLTE is currently unimplemented as it breaks RIL
MP3 playback (for some reason) | Use poweramp/vlc or set mono audio from accesibility settings.
Permissive SELinux
Installation
Requires Unlocked Bootloader & a custom recovery. Also, use opengapps nano/pico: http://opengapps.org/
Place ROM & Gapps in your virtual SD
Reboot in Bootloader Mode
Go to "Recovery" (Vol +/Vol -) and confirm (power)
Wipe Data/Factory Reset
Wipe Dalvik cache
Install the ROM zip
DO NOT REBOOT
Install the Gapps zip (optional)
Reboot
N.B. Official LineageOS builds are unrooted, if you want this feature back flash su (arm) (available here) then enable root access from Settings -> Developer options.
Unroot is even easier, just flash "su removal" package available at the previous linked page. (not yet implemented - Use magisk instead)
Also, a big thanks to @Alberto97 for the osprey/msm8916 bringup, @DroidFreak32 for the help and the commits and the repos i had to use, @CarlosArriagaCM for the Wi-Fi fixes, @amarc78 for the testing on dual-sim devices.
Downloads
Dec 25th
Older builds:
Sept 24th
August 26
AndroidFileHost: Sept 17
AndroidFileHost: Oct 19
April 1st
Manifest I use to build:
https://github.com/DroidFreak32/local_manifests/tree/master/LOS-Oreo/local_manifests
XDA:DevDB Information
Lineage 15.1 for Moto E 2015 LTE (surnia), ROM for the Moto E 2015
Contributors
ElDainosor, Alberto97, DroidFreak32, CarlosArriagaCM, amarc78, MatiHalper, AgentFabulous, AdrianDC
Source Code: https://github.com/Lineageos
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Unlocked Bootloader, Squid TWRP
Version Information
Status: Testing
Created 2017-09-07
Last Updated 2018-12-25
NOTE FOR THOSE WHO USE DATA: Please, go and enable developers options and then DISABLE MOBILE DATA ALWAYS ACTIVE! This will eat your data if you have it enabled (check latest screenshots). Also, the first boot may be laggy as hell, so, wait until the "Android is upgrading" notification ends and then reboot. You'll get a more stable system after that.
FAQ
Q: It's for daily usage?
A: It's a experimental test build to have fun and mess with. Obviously the bugs will be fixed soon, but, if you are flashing this rom and using it for daily usage and then complaining about it, don't point at me, you're the responsible for flashing this.
Q: Camera will be fixed?
A: Well, the camera it's a thing because we use a old type of camera, that previously was unsupported (HAL1, remember that nougat doesn't got video recording? Well, it was because of our type of camera). So, we have to wait to lineage to fix it or workaround it in some way.
Q: I got x issue flashing x mod!!
A: First of all, naturally mods are unsupported, and more in this case, i mean, it's a new version of android, obviously some stuff will be unsupported and they have to update it, so, if your mod doesn't work, please don't report it here.
Q: I got x issue! halp
A: If the issue wasn't reported already on the OP, please report it with a log, you can take it with adb logcat on your pc, or replicating the issue and logging it with Matlog (requires root)
Q: Sir pls do it for otus/moto e4/idk
A: I don't have the device so, how can i test if everything is ok? Also, please don't spam "Waiting for x device" because... that will not do anything more than make spam
Q: Where can i get gapps for 8.0?!?!?!
A: Please go back into the first post and read it carefully.
Q: When i installed the gapps, and go into play store, my phone keeps into "Getting info"
A: Did you flashed rom and after a reboot did you flashed gapps? that's why it's getting there. Else, i don't know tbh, it should work normally if you clean flash the ROM along with gapps.
Q: If i want to flash some new update, how can i do it?
A: Without doing any wipes, flash the new release, the gapps and magisk (if you used it, if you didn't flashed it, skip this) and then reboot. You'll have everything working without crashes and stuff
I think that's it for now, here's some screenshots
VoLTE Pl0x Haha!
wewewewe
DroidFreak32 said:
VoLTE Pl0x Haha!
Click to expand...
Click to collapse
Nu volte sir pls gib
ElDainosor said:
Code:
[LIST=1]
[*]Place ROM & Gapps in your virtual SD
[*]Reboot in Bootloader Mode
[*]Go to "Recovery" (Vol +/Vol -) and confirm (power)
[*]Wipe Data/Factory Reset
[*]Wipe Dalvik cache
[*]Install the ROM zip
[*][B][COLOR="red"][B][U]DO NOT REBOOT[/U][/B][/COLOR][/B]
[*]Install the Gapps zip (optional)
[*]Reboot
[/LIST]
[/QUOTE]
Gapps? opengapps only 7.1
Thanks for you hard work.
Click to expand...
Click to collapse
ENRIQUEMM said:
Gapps? opengapps only 7.1
Thanks for you hard work.
Click to expand...
Click to collapse
Can you please read the OP a little bit more?
ElDainosor said:
Can you please read the OP a little bit more?
Click to expand...
Click to collapse
You forgive me, I did not see the links ...
One mistake, I have a 64 Gb microsd card and it detects it as 128 Gb .... but the access to the files is perfect. The had in 14.1 configured as internal storage and reads it without having to format it.
ENRIQUEMM said:
You forgive me, I did not see the links ...
One mistake, I have a 64 Gb microsd card and it detects it as 128 Gb .... but the access to the files is perfect. The had in 14.1 configured as internal storage and reads it without having to format it.
Click to expand...
Click to collapse
Good that worked fine also, don't quote the whole op.
Gapps not working
I flashed it after reboot
oppodi said:
Gapps not working
I flashed it after reboot
Click to expand...
Click to collapse
That's why. You have to flash it with the rom
Everything working fine, mp3 files too, i think the problem is only with default player of LOS,here with poweramp is ok,amazing work with this "test" version,no new bugs until now.
Wow!!!
A 2015-ish device, received unofficial 8.0.0 Thats awesome
I'm definately going to try it
Thanks
oni543 said:
Everything working fine, mp3 files too, i think the problem is only with default player of LOS,here with poweramp is ok,amazing work with this "test" version,no new bugs until now.
Click to expand...
Click to collapse
Really? I'm going to try it out, thanks for the info!
Wow I'm excited! Great work guys! This seems very stable for a first build. I've been running @Carlos Arriaga's AOSP 7.1.2 ROM for a while now, so I can't wait for AOSP Oreo!
Sent from my Motorola XT1526 using XDA Labs
MP3 works on VLC.Tested on XT 1521
Hit Thanks if you Like
Thank you
Volte is Working if you use app provided by your mobile operator. And use stock dailer to call I am using Jio Voice App for Jio Network.
Hit Thanks if You Like
Aniruddhagupte11 said:
Volte is Working if you use app provided by your mobile operator. And use stock dailer to call I am using Jio Voice App for Jio Network.
Hit Thanks if You Like
Click to expand...
Click to collapse
Sorry but Jio4GVoice App Just helps Dervice w/o VoLTE to place a call over Network & also If you are able to receive and place call using Jio (with Audio/Voice of Bidirectionally) without Jio4GVoice App Than its considered to have VoLTE Support
Edit:-
Tested Calling Using VoLTE (Device Dialer) it worked sometimes (not every time)
While Receiving Calls (Incoming Calls) are most probably received (Out of Coverage Area or Device Switched OFF) but when its placed The Device Restarts to TWRP (Factory Data Restart - Device Restarting)
These are the issues I faced (Using Phone Dialer)
Note: As per Dev VoLTE is still unimplemented so don't bother about it much till its implemented or said so by the Dev
@ElDainosor Thanks for the ROM
@ElDainosor
Hi, downloading 09.07 & pico. Will flash soon.
Do you need some tests?
Xt1524.
Hmm...
Oreo is ugly like... curdled milk, out of date for consumption.
Flashed without any problems, restoring apps from google account, will flash magisk 14 soon.
New trebuchet? Where the globe is rolling?
Good job.
Bt works, poweramp, jetaudio - yes, black player - no.
Tomorrow will check gps - waze, g.maps, navime.
Magisk 14, adaway - yes. Waze - yes.
How can I disable charging led(only for charging)?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Unofficial LineageOS 14.1 / Android 7.1.2 - Lenovo A850
This is a LineageOS 14.1 rom for our Lenovo A850. This is NOT MY WORK, I found it on this russian forum/post. All creadits to the developer. This is a pure android 7.1.2 and not a looklike rom.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Photos:
-
Bugs:
- [not tested] Camera focus may be buggy.
- There is no system space for installing Gapps. I moved webview as user app and then installed pico.
- Magisk / SuperSu installation not working
- [not tested] Xposed libraried
- Can't always get into recovery using both volume and power buttons (go through the power menu)
- When in the recovery and rebooting into system the phone closes (unplug the batery and reboot it)
- Reboot just powers down the device
- [not tested] Grenify causes bootloops
- You can fix the IMEI with Tool Hero (the update of MobileUncle), after that uninstall it.
- I face mobile data problems (data work whenever they want)...
Instructions:
0. MAKE A NANDROID BACKUP! This ROM doesn't do well with you NVRAM... You will probably need to restore your IMEI, your Serial Number would be lost, your Mac Address etc. So... backup.
1. Make sure you are on ROW format. You can check this from your "Baseband version", it should contain/say ROW or CN. You can flash this ROM first to move to a ROW format (taken from this tutorial). You can always replace the "recovery.img" file with this recovery.img that i have cooked (English version). Can also be flashed over "[MM 6.0.1] Unofficial Cyanogenmod 13".
2. Download this file (LineageOS 14.1 rom), put it in your SD (source).
3. Boot into your TWRP recovery, wipe Dalvik / ART Cache / System / Cache / Data, and flash the zip from you SD. Installation takes a lot of time.
5. Boot phone and BOOM, Android 7.1.2!!!! (boot takes a little too)
6. To enable root access or reboot to recovery, open Settings->About->Tap "Build number" many times to unlock Developer Options->go back->Developer Options->Check "Advance reboot" and change "Root access"
IMEI Problems/Fixes:
You can fix the IMEI with:
- With MobileUncle (follow these steps)
- Tool Hero (the update of MobileUncle), after that uninstall it.
- Else... if you don't know that you can run IMEI&SN Writer V1.5.3, flash this ROM and try to run it (setup drivers etc). Then FORMAT the phone (with flashtool click format,auto), and flash (click download this time) this ROM(the same with the first link), and then change the IMEI etc with IMEI&SN Writer V1.5.3.
If you liked this topic, click the thanks button <--
Anyone tried it ???
jmase said:
Anyone tried it ???
Click to expand...
Click to collapse
It worked fine and very smooth for one day until i started using Link2SD (since phone's space is way too small). After some failed linked apps (after changing a SDcard) i started having problems and many apps crashed (not the linked ones!). I am going to reinstall the rom and clean everything and i will report back.
But the first day was really really good. I was able to play StarWars Heroes, which i was not able to play with the CM 13 rom (was too laggy).
jmase said:
Anyone tried it ???
Click to expand...
Click to collapse
Can i joint?i need assistant backing to procced..i've no other problem with this A850 just with the build-in "Talk Back app.i don't need it.crashing often.Assis??
Dev. Opt_Beta said:
Can i joint?i need assistant backing to procced..i've no other problem with this A850 just with the build-in "Talk Back app.i don't need it.crashing often.Assis??
Click to expand...
Click to collapse
Lol.. install apps2sdcard.apk to uninstall system apps.
jmase said:
Anyone tried it ???
Click to expand...
Click to collapse
it's working but the bluetooth is an error occur... bluetooth not respnding...
GreatApo said:
It worked fine and very smooth for one day until i started using Link2SD (since phone's space is way too small). After some failed linked apps (after changing a SDcard) i started having problems and many apps crashed (not the linked ones!). I am going to reinstall the rom and clean everything and i will report back.
But the first day was really really good. I was able to play StarWars Heroes, which i was not able to play with the CM 13 rom (was too laggy).
Click to expand...
Click to collapse
It might also be a problem with link2sd itself, I was using it without problem on this phone with cyanogenmod (android 6) and in one of the last updates it blocks the phone.
A quick solution when the phone is not booting (my case) rather that fully reinstall, is go into recovery, terminal, cd /data/apps/ and delete link2sd .apk. By doing that the phone booted normally, so I would blame a little link2sd. There have been some updates (of link2sd) afterwards, but haven't tried them.
---------- Post added at 11:42 AM ---------- Previous post was at 11:39 AM ----------
Just a hint if system space is so limited: opengapps has the possibility to uninstall/replace system apps by custom script.
Check: https://github.com/opengapps/opengapps/wiki/Advanced-Features-and-Options
You can, for example, remove eleven, gallery, screen recorder... and then maybe there is space for a pico flashing
sooperior said:
It might also be a problem with link2sd itself
Click to expand...
Click to collapse
Yes probably. Anyway the biggest problems with this roms is that the IMEI is lost. Now I can't restore it. I have driver problems connecting it to the PC and not the time to fix it.
Google Drive Link doesn't work... d'oh
Unfortunately, the google drive link no longer works. Does anybody have a direct link to the file?
Moreover, apparently there are several variants of A5500-F. There is not only CN and ROW, but also MT6582 and MT6735.
I have MT6582 ROW. Would the file match?
If not, does anybody have an idea where to get a recent Android for the A5500-F ROW MT6582 that can be downloaded without too many hoops to jump through? Why can't people post straight links?
Thanks,
Alain
Alk142 said:
Unfortunately, the google drive link no longer works. Does anybody have a direct link to the file?
Moreover, apparently there are several variants of A5500-F. There is not only CN and ROW, but also MT6582 and MT6735.
I have MT6582 ROW. Would the file match?
Click to expand...
Click to collapse
Sir, this thread is for Lenovo A850 (plain). It will not work on A5500 or anything other than A850.
Are A8-50 and A5500-F the same or not?
sooperior said:
Sir, this thread is for Lenovo A850 (plain). It will not work on A5500 or anything other than A850.
Click to expand...
Click to collapse
Problem is, some posts (even on this site) say A8-50 and A5500-F are the same thing. Heck, even Amazon's bill from back when I bought it calls it an A8-50. A list of all A8-50 variants and how to tell them apart would be helpful.
Alk142 said:
Problem is, some posts (even on this site) say A8-50 and A5500-F are the same thing. Heck, even Amazon's bill from back when I bought it calls it an A8-50. A list of all A8-50 variants and how to tell them apart would be helpful.
Click to expand...
Click to collapse
There is only one Lenovo A850.
Has Anyone manage to install a stable lineageOS on a Lenovo A8-50 A5500H or A5500H
Hi
I´ve been looking though the sites via google, but cant find anything definitiv about running Lineage on A5500 modells with chipset MT6582
Kernel: 3.4.67.
Works fine with Kitkat but I can get som apps to run on it since they dont support Kitkat anymore .
Best regards
Leikie
working on a859?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DotOS 1.2 (Based on Nougat 7.1.2) for Nexus 7 2012 (grouper)
DISCLAIMER
Code:
#include <std/disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
ROM INFO
This is unofficial source-built DotOS for Nexus 7 2012 (grouper).
....
Yes, just simple as that. Get ready to #AlignTheDots !
ROM FEATURES
C'mon, you should discover it yourself! Flash it and play with your buddy!
ROM BUGS
Code:
- Camera : Shots are pixelated
- Gallery : Thumbnails' color is sort of like gone haywire :3 (tbc)
ROM INSTALLATION
*NEW USERS: Unlock bootloader and flash latest TWRP using fastboot
1. Boot into TWRP (Power + Volume Down > Select Recovery Mode)
2. If clean flash, wipe /data, /cache, /system
3. If you'd like to have f2fs, format /data (your internal SD content will be lost!) and /cache to f2fs.
4. Proceed into flashing ROM (install ZIP or sideload)
5. Proceed into flashing other ZIPs if any.
6. Reboot system. First boot takes about 10-15 minutes. Be patient
SIDE NOTES
- If you were to install GAPPS, well... I did say that you'll have to figure it out on your own.
- Builds are rootless, you have the option to install Magisk on your own.
- Builds are not tested on Nexus 7 2012 3G variant. I doubt if they work anyway.
- Signature Spoofing support is yet to be added :3
SOURCES
Full credits to @AndDiSa (device sources), @Ziyan (Unlegacy Android), DotOS, LineageOS, long-lived CyanogenMod, and other Nexus 7/Tegra3 developers.
https://github.com/leewp14/local_manifests
XDA:DevDB Information
[ROM] [UNOFFICIAL] DotOS 1.2 - grouper, ROM for the Nexus 7
Contributors
lee.wp14, AndDiSa, Ziyann
Source Code: https://github.com/leewp14
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.1.x
ROM Firmware Required: TWRP 3.x
Version Information
Status: Testing
Created 2019-01-04
Last Updated 2019-01-03
DOWNLOADS
Builds are uploaded to my Google Drive. Click here to access.
Look under directory : grouper > dot
*DO NOT MIRROR WITHOUT MY PERMISSION. Thank you.
CHANGELOG
Code:
[U][B]20190103[/B][/U]
- Initial build
I will only write changelog for tested working builds :good: try at your own risk if you want to test it before me :3
Those inside .trash folder are my test builds. Please, avoid this folder and other no changelog written build if you want to play safe. Thanks
SCREENSHOTS
Attached to this post...
nice to see new roms to test, donwloading now!
Nice rom, but without play store Is useless. Secure patch are old, i Hope you Will update. For play store i tried to install with magisk,with open gapps (gapps-config) and manual but nothing. Dt2w work , battery Life is good(i would to try with store).anyway thanks for keep alive this old Beast.
Rom doesn't keep app permission (i Always give storage permission to kiwi browser for download apks)
TureX said:
Nice rom, but without play store Is useless. Secure patch are old, i Hope you Will update. For play store i tried to install with magisk,with open gapps (gapps-config) and manual but nothing. Dt2w work , battery Life is good(i would to try with store).anyway thanks for keep alive this old Beast.
Rom doesn't keep app permission (i Always give storage permission to kiwi browser for download apks)
Click to expand...
Click to collapse
I will look into that soon.
I have quite a number of stuffs coming up these weeks, thus will put this aside first.
For GAPPS, I still yet to try install GAPPS, thus I wrote that you guys are to figure it out on your own . But as a tip for you, previously when I'm using RR Nougat, I removed a lot of foreign fonts, TTS files, sound media files, and was able to get pico opengapps installed successfully (I didn't use gapps-config anyway).
As a suggestion, you can also try to have the GMSCore installed as user app (in /data partition). During the days when I'm using Samsung Galaxy Ace, we used to have the GMSCore installed on /data.
@TureX I can't reproduce your problem regarding app permissions. Can you reconfirm this? I've tried Kiwi Browser from Play Store too.
lee.wp14 said:
@TureX I can't reproduce your problem regarding app permissions. Can you reconfirm this? I've tried Kiwi Browser from Play Store too.
Click to expand...
Click to collapse
Hi, thanks for your reply. Now i can't reproduce cause i format the tablet, maybe was corrupted my installation that cause that issue. Sorry for my bad English.
Development discontinued
Was quite busy lately, didn't even have time to relax browsing on the nexus.
Few days ago left my Nexus 7 aside in my book rack after fully charged. That time I have personal modified gapps installation installed.
Not sure if is my gapps configuration is not proper, it caused the tablet to overheat. I just noticed it when back home from work at night. So literally GMSCore is using my cpu for the whole day (surprisingly not wakelocking). Whole tablet hot as f*.
Left it charge, the next day after unplugged, using it for few minutes, then sudden blank. Cannot even charge. Total dead.
Suddenly yesterday it boots, but has symptoms of emmc failure (as I recall it now). That time not sure what happened, not even have time to look on it.
Today finally back home early, can check on it. Factory reset 2 times all sudden reboot when wipe. Highly confident is emmc failure. Try flash stock, write failed when flashing bootloader. Baam, Nexus 7 is total dead again.
Will try to reheat the chip and see if it revives, as the overheating seems to be the culprit. If not, then it's an end for Nexus 7's DotOS :| so sad :crying:
Thanks guys. Development will be halted for the time being.
lee.wp14 said:
Was quite busy lately, didn't even have time to relax browsing on the nexus.
Few days ago left my Nexus 7 aside in my book rack after fully charged. That time I have personal modified gapps installation installed.
Not sure if is my gapps configuration is not proper, it caused the tablet to overheat. I just noticed it when back home from work at night. So literally GMSCore is using my cpu for the whole day (surprisingly not wakelocking). Whole tablet hot as f*.
Left it charge, the next day after unplugged, using it for few minutes, then sudden blank. Cannot even charge. Total dead.
Suddenly yesterday it boots, but has symptoms of emmc failure (as I recall it now). That time not sure what happened, not even have time to look on it.
Today finally back home early, can check on it. Factory reset 2 times all sudden reboot when wipe. Highly confident is emmc failure. Try flash stock, write failed when flashing bootloader. Baam, Nexus 7 is total dead again.
Will try to reheat the chip and see if it revives, as the overheating seems to be the culprit. If not, then it's an end for Nexus 7's DotOS :| so sad :crying:
Thanks guys. Development will be halted for the time being.
Click to expand...
Click to collapse
Dude if its the motherboard that is broken I can send you another one free of charge if you live in the united states because I have 5 of them
JT1510365 said:
Dude if its the motherboard that is broken I can send you another one free of charge if you live in the united states because I have 5 of them
Click to expand...
Click to collapse
Wow, that's quite a lot of them! But thanks, I've decided to continue building for Samsung Note 1 only. As I rarely use my Nexus 7 (in fact I didn't bought it but I get it free from someone).
Thanks for your kind offer anyway!
lee.wp14 said:
Wow, that's quite a lot of them! But thanks, I've decided to continue building for Samsung Note 1 only. As I rarely use my Nexus 7 (in fact I didn't bought it but I get it free from someone).
Thanks for your kind offer anyway!
Click to expand...
Click to collapse
Switching motherboards takes like 5 minutes and is a simple task! Just saying because 6 month ago when mine broke due to the emmc bug and I paid around 25 Euros for another one (even was a 32GB from Hynix)...
So think twice about this offering!
Sorry for off topic discussion and have a great day!
Sent from my Nexus 7 using XDA Labs
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Installation instructions :
Be sure to have installed latest TWRP recovery (you can find it in downloads) and latest Android Lollipop (5.0.2 for matisse, 5.1.1 for millet) firmware
Download the latest build and GApps (ARM, 10.0, I advice pico package) - if you'll go to wipe even internal storage, put them on a microSD or an USB OTG, or copy them after wiping it
Boot to recovery mode
Wipe > Advanced wipe > Select system, data, cache and dalvik/art cache (and, if you want to clean more, select even internal storage, which deletes all the content in /sdcard) and do swipe to wipe. When it finishes, go to home page
Install > select ROM zip file > swipe to flash and, when it finished, go to home page
Do the same thing to flash GApps
Reboot > System
Update instructions :
Be sure to have installed latest TWRP build
Download the latest build
Boot to recovery mode
Install > select ROM zip file > swipe to flash and, when it finished, go to home page
Reboot > System
Known issues :
Magnetic cover doesn't trigger magnetic sensor (it works, but it's too little sensible).
Some randomic minor issues with YouTube app (sometimes, after skipping ads in a video, you'll get just a grey screen - close and reopen video to fix the issue)
Some randomic issues with bluetooth MAC address (bluetooth app crashes always). To fix this, you need to get (take note!) the address by going to stock ROM and getting that from Settings > About tablet menu. Then, come back to LineageOS 17.1 and rewrite the file /efs/bluetooth/bt_addr by using root permissions and a root file explorer, or by using adb push/pull, better in TWRP.
5 GHz WiFi networks between channels 149 and 161 are invisible to the Tab
In matisse3g and millet3g SIM isn't working
Downloads :
All models (from 2023-01 build): https://github.com/matteo0026/OTA/releases
Mirror for all models: https://t.me/tab4los
matisse (10.1) devices (until 2022-09 build): https://androidfilehost.com/?w=files&flid=321910
millet (8.0) devices (until 2022-09 build): https://androidfilehost.com/?w=files&flid=324731
TWRP recovery: https://forum.xda-developers.com/tab-4/development/recovery-twrp-recovery-matisse-millet-t4019831
GApps: https://opengapps.org/ (ARM, 10.0, I advice pico package)
Contributors
matteo0026, DJABHipHop, Alastor89, All the S3NEO devs that provided the base for developing Pie on Tab 4
Source Code:
https://github.com/lineageos for samsung msm8226 common device and kernel source, with some patches coming from Gerrit for device source
https://github.com/s3neo for matisse and millet and specific variants device and vendor source
https://github.com/TheMuppets for samsung msm8226 common vendor source
Thank you for this ROM, very good and stable Great job, I ran the installation on my T335 as described. I encountered a bug during calls (both incoming and outgoing) the device run, I do not hear the voice, only in HANDSFREE mode. Same problem for all calls also whatsapp.
The internal speaker of the phone does not work and even if I connect with bluethhot of the headphones I do not hear the voice but only the system sounds.
Ok, Camera and zoom.
Crimor said:
Thank you for this ROM, very good and stable Great job, I ran the installation on my T335 as described. I encountered a bug during calls (both incoming and outgoing) the device run, I do not hear the voice, only in HANDSFREE mode. Same problem for all calls also whatsapp.
The internal speaker of the phone does not work and even if I connect with bluethhot of the headphones I do not hear the voice but only the system sounds.
Ok, Camera and zoom.
Click to expand...
Click to collapse
Thanks for the feedback. I removed the dot about camera issues for millet. About sound, I need a logcat and you should be good to explain me when you did what in the logcat. I advice you to enable seconds in the status bar, so you can precisely point to that second of events. All these issues should be fixable with some edits in the mixer paths, but before I touch something, I need a logcat with precise indications.
thanks for the build. Will be sure to take a look at it.
Good job, a perfect ROM, very stable... no issue at this time...
Successfully installed on SM-T532 with GApps pico. I first tried to install without GApps and it ended up with some apps randomly crashing. After my second install with pico, everything runs as expected for now. Thanks!
SM-T330: excellent. No problems to install, everything works, including camera, bluetooth, and wifi. Very responsive and fluid experience. Thank you so much for this ROM (and the lineage 16 as well)!
New build of LOS17.1 with 2021-05 security patches is online!
Changelog:
- May 2021 security patches
- Little fix to power profile
- Drop Adreno RenderScript blobs (https://github.com/TheMuppets/propr...mmit/b360ae6f58414911861ba2d736a56744b9622df5)
- Some more kernel patches included
- Reduced kernel size by removing some useless stuff - now Lineage recovery can be built without having size issues
I even uploaded 17.1 lineage recovery, since you can use fastbootd there too. It could be useful to flash .img recovery files if you choose to install it. It's just a little advice. Do what you want then.
matteo0026 I've been trying to download from androidfilehost the file lineage-17.1-20210513-UNOFFICIAL-matissewifi.zip since yesterday but it's impossible, OOPS! no mirrors found.
Is there another download alternative?
Regards, and thanks for your work.
Jose_CM said:
matteo0026 I've been trying to download from androidfilehost the file lineage-17.1-20210513-UNOFFICIAL-matissewifi.zip since yesterday but it's impossible, OOPS! no mirrors found.
Is there another download alternative?
Regards, and thanks for your work.
Click to expand...
Click to collapse
No download alternatives, but I contacted Androidfilehost support to ask why of this problem, since I have been able to reproduce the issue in the download page. And this issue is present in all variants in LOS 17.1, not just matissewifi. At least, LOS 16 has at least 1 mirror per build. Probably the infrastructure is really slow to make copies to the various servers.
I tried downloading 17.1 for my SM-T530NU and had the same issue. I'll wait for the download on AFH.
Thanks and keep up the great work matteo.
I was right, it was a problem of androidfilehost. Now the builds are downloadable with all the mirrors.
thank you alot for the LOS 17.1. I updated my T335 with TWRP to latest and flashed LOS17.1 and pico gapps, only wiping cache,davlik. It works really well. Even camera takes fotos. Here no freese as in LOS16. LOS17 is a bit less snappy compared to LOS16, but camera is important for me. Thank you Mateo, very nice that you maintain the tab 4.
I installed 17.1 on my SM-T530NU. No issues so far. 17.1 feels more responsive on the tablet than 16.
Thanks for the great rom Matteo.
I installed 17.1 on my SM-T531. It works perfectly. With this new firmware, my tablet got a new life. Everything is fine, but the GPS doesn't work with this ROM. It worked with the factory firmware, but I don't want to roll back to it. Is there a way to fix GPS?
Thank you for the great ROM, Mateo
jim-cz said:
I installed 17.1 on my SM-T531. It works perfectly. With this new firmware, my tablet got a new life. Everything is fine, but the GPS doesn't work with this ROM. It worked with the factory firmware, but I don't want to roll back to it. Is there a way to fix GPS?
Thank you for the great ROM, Mateo
Click to expand...
Click to collapse
It works, but it takes a lot of time to do a 3d fix. Tested. And you have to test the gps outdoor. Probably it can be improved, but I don't know how.
Thanks for your attention to my problem, Matteo. I tested it for several hours outdoors today. Unfortunately, the GPS does not work at all. I watched it in the GPS test app, the tablet can't find any satellite. It worked properly earlier with the factory 5.02 ROM. I'm still looking for a way to fix it in your great firmware.
jim-cz said:
Thanks for your attention to my problem, Matteo. I tested it for several hours outdoors today. Unfortunately, the GPS does not work at all. I watched it in the GPS test app, the tablet can't find any satellite. It worked properly earlier with the factory 5.02 ROM. I'm still looking for a way to fix it in your great firmware.
Click to expand...
Click to collapse
Ok. I'll test it better in 17.1 too. In 16, I'm 100% sure that it works.
jim-cz said:
Thanks for your attention to my problem, Matteo. I tested it for several hours outdoors today. Unfortunately, the GPS does not work at all. I watched it in the GPS test app, the tablet can't find any satellite. It worked properly earlier with the factory 5.02 ROM. I'm still looking for a way to fix it in your great firmware.
Click to expand...
Click to collapse
Ok. I'll test it better in 17.1 too. In 16, I'm 100% sure that it works.
@jim-cz try this file (that you have to extract from the zip file). Put it in /system/etc.