Hi, I just installed Believe Kernel RO9, I have CM 13 in my phone but I have waited for 20 minutes and it still loading, I made a emergency power of and started on recovery, can you plz send a link with the original kernel or help me with this? PLZZZ:crying:
Here's squid kernel http://forum.xda-developers.com/moto-e-2015/orig-development/squid-kernel-moto-e-lte-2015-t3072209
Sent from my XT1526 via CM 13
Related
I flashed the Cyanogen mod 10.1 nightlies for 2013-01-05. The boot animation was running for an abornomally long time so I pulled the battery and booted up and now the boot animation will not stop running. I tried searching for help but with no avail I have not found it too fix this problem. Also I made a CWM backup.
jubjubcat said:
I flashed the Cyanogen mod 10.1 nightlies for 2013-01-05. The boot animation was running for an abornomally long time so I pulled the battery and booted up and now the boot animation will not stop running. I tried searching for help but with no avail I have not found it too fix this problem. Also I made a CWM backup.
Click to expand...
Click to collapse
Also after trying too restore it, I just get the error Couldn't find directory no files found.
jubjubcat said:
Also after trying too restore it, I just get the error Couldn't find directory no files found.
Click to expand...
Click to collapse
Nevermind fixed it.
How did you fix it? rh
How did u fix it? I am facing a similar problem.
and when i tried to upgrade from cm10 to cm10.1 i was stuck at "Android is upgrading - Starting apps" screen. and a fresh installation of cm10.1 was stuck at the boot animation.
I am using Siyah Kernel 1.8.7 and having cyanogenmod as my secondary rom.
Plz help somebody
utsav7r said:
How did u fix it? I am facing a similar problem.
and when i tried to upgrade from cm10 to cm10.1 i was stuck at "Android is upgrading - Starting apps" screen. and a fresh installation of cm10.1 was stuck at the boot animation.
I am using Siyah Kernel 1.8.7 and having cyanogenmod as my secondary rom.
Plz help somebody
Click to expand...
Click to collapse
SiyahKernel s3-v1.8.8
Posted on January 13, 2013
Changelog
rebased on i9300 update7 sources (sudden-death issue is supposedly fixed in this source drop)
reverted temporary fix for exynos-mem exploit as i9300-update7 sources already fix that
cm10.1 is now supported in dual-boot configurations
1.8.7->1.8.8: fixed cm10.1 not booting when installed as 2ndROM (a tiny typo in ramfs)
BUT,it doesn't work anyway (just trying now at it's stuck on the boot screen)
Just try it and report back! :good:
You do realize that the siyah kernel is for the international S3 which has different hardware then our s3? If you are using a kernel for a different phone then of course it wont boot....
R: [Q] Flashed cyanogen mod 10.1, stuck at boot animation
By "International", you mean the exynox version unlocked right?
Sent from my GT-I9300 using xda app-developers app
R: [Q] Flashed cyanogen mod 10.1, stuck at boot animation
Whatever, it's been released v1.8.9 and it's said to fix the CM10.1 issues
Sent from my GT-I9300 using xda app-developers app
Flash problems
I've had installs stick at the boot animation or shortly thereafter several times. Usually it's because of a dumb mistake. The only thing that's consistently worked for me is flashing back to stock VZ firmware via Odin and doing the whole process over from root through installation. It sucks but it always works.
Howdy.
I've just flashed CyanogenMod 10.1 - 20130315 to my droid 4 with Safestrap, and I haven't been able to boot into it; the cyanogenmod splash screen with the rotating wheel graphic shows up, but it spins for upwards of 40 minutes without doing anything.
I followed the guide on the cyanogenmod wiki for the droid 4 device. The forum won't let me post a link to it.
Before I installed I wiped / factory reset, and after install I wiped cache/dalvik; still no dice. I've tried doing the same process several times (even wiking the system before trying to reflash), but the same result has always occurred: ever unhelpful eternal wheel...
I'm a bit at my wits end; I haven't been able to find any other information about this that wasn't solved by wiping cache / dalvik, so I turn to y'all for help.
Same here
I installed Cyanogenmod 10.1 with CWM the link:[Recovery/Bootstrap][5-sep-2012] CWM Touch recovery v6.0.1.1 - xda-developers and i went ahead and installed the mod: cm-10.1-20130211 all went fine untill i noticed that my camera is not working (not a big deal) but then i noticed that my phone only saw 488MB out of my 32GB this was un acceptable after i found how to connect my phone to my pc so it showed up as a storage device do that i copied the same mob but a different version (cm-10.1-20130129_v2) so i went ahead and booted into Android system recovery <3e> and i did a factory reset and then i said oh f*** i need CWMR to install the thing so i just waited for it to do its thing and then reboted the device thinking after i boot up i will reinstall CWMR but i was never able to boot because im stuck on the boot animation. Been waiting for +20min or so and nothing please help me what can i do this is my only phone please help
help with CM10.1 ROM issue
Hi folks,
this is my first post on XDA. I have a Sprint htc EVO 4G LTE phone which was running on JB.
Thought of root and flash with CM. So, first I unlocked the bootloader using htc dev and installed TWRP custom recovery and then rooted.
Then I flashed the stable CM 10 then flashed gapps which is compatible for CM 10 version. so far so good. oh, btw I did nandroid backup before flash and also wiped to factory reset, cache and Delvic cache.
After the flash i clicked on reboot system and I see the Cyanogenmod boot, but its stuck at that stage and I waited for more than an hour. No luck.
Thank god I did back up before this, otherwise not sure what I'm gonna do.
But, could someone tell me why it gets stuck at this point. I know some of you guys had this problem. I searched everywhere but didn't get help. I thought of posting this in android development forum, but as a newbie I can't do that.
Please help me out.
P.S: when I'm on boot screen (power button + vol down button) I see unlocked at the top but I also have TAMPERED in red color on top of that. Was this normal? or do you think that is causing the problem? and what should I do now?
(First of all I am not an expert)
It happens sometimes about 1/10 of every flashes I did with cm10
It might because some files didn't get copied or got corrupted.
Just try this method
Format data
Format system
Format cache
Wipe dalvick cache and factory reset
Now flash the ROM
Hit thanks if I helped
Sent from my WT19i using xda app-developers app
---------- Post added at 11:35 PM ---------- Previous post was at 11:27 PM ----------
(First of all I am not an expert)
First wipe every thing(system,data,cache,dalvick,android secure....)
Now install ROM,
Wait don't install gapps
Now find an extended cm10.1 kernel or lupus kernel(or such kernels) for your device and flash it via pc
I prefer flashing kernel after installing the rom
Hit thanks if I helped
Sent from my WT19i using xda app-developers app
NEED HELP Cm9
OK so i have xperia x10 mini i have root long time so i decided since there is no update from 2.1 that am gona manualy put new software.I watched youtube video on how to do cyanogenmod 9 so i did everything(flash,bootloader....) and after all that the screen started and i got stuck on that blue screen i tried to turn phone off that didnt work i can only restart the phone and when i plug in it doesnt say anything i cant open sd card or anything its just stuck like that pls help.SORRY FOR MY ENGLISH
neso97 said:
OK so i have xperia x10 mini i have root long time so i decided since there is no update from 2.1 that am gona manualy put new software.I watched youtube video on how to do cyanogenmod 9 so i did everything(flash,bootloader....) and after all that the screen started and i got stuck on that blue screen i tried to turn phone off that didnt work i can only restart the phone and when i plug in it doesnt say anything i cant open sd card or anything its just stuck like that pls help.SORRY FOR MY ENGLISH
Click to expand...
Click to collapse
Ask in the Xperia X10 mini forums.
Three-finger salute
Ran into this situation today when I tried to restore a backup and I couldn't get past the CM10 logo on bootup. Holding down all three buttons, power, volume up and down, got me back to the Clockworkmod boot screen.
ETA: Sorry, posted in wrong forum. My situation pertained to a Samsung Galaxy 5 Media Player.
neso97 said:
OK so i have xperia x10 mini i have root long time so i decided since there is no update from 2.1 that am gona manualy put new software.I watched youtube video on how to do cyanogenmod 9 so i did everything(flash,bootloader....) and after all that the screen started and i got stuck on that blue screen i tried to turn phone off that didnt work i can only restart the phone and when i plug in it doesnt say anything i cant open sd card or anything its just stuck like that pls help.SORRY FOR MY ENGLISH
Click to expand...
Click to collapse
Hi...i just happened to flash my x10 mini to cm9-robyn yesterday...same thing happpened to me...boot the animation until run of battery....i accidently booted it to recovery and just leave it...fortunately after sometime it booted by itself and run as normal. The cm9 run ok except the wifi is not working. Hope that will help. I am not an expert.
Downloaded the Kernel from this website below:
http://rootzwiki.com/topic/25777-kernelaospv2updated-519-gt-p3113-kernel-ocucuvgpuoc-448mhz-etc/
Installed through CWM with zip
Now stuck on a bootloop (when I press the power button, it only reboots it self. doesn't turn off)
The bootloop doesn't go on to my ROM. Stuck on the Samsung GALAXY TAB 2 7.0 logo. My GTab is GT-P3113.
Thankfully, still can go to CWM with ease. (Power + Vol Up) Everything still accessible. Just how to boot to ROM. If going back to stock kernel fixes it, fine. Just give me the link and I'll give it a try(I feel bad for not backing up my kernel). Please help ASAP:crying:.
P.S. I'm on CM11 for P3110. Works fine, even the IR blaster. Just if anyone needs this information
Late Question: Does re-flashing CM11 on the tab restore the stock kernel? If so, is the appdata going to be saved if I re-flash the ROM?
Fixed: booted to ROM
Anyone facing the same problem, just re-flash your ROM (in my case CM11) and GApps if needed. To my surprise, it reboots back to the home screen. Now, I have the problem of android.process.acore crashing. Help?:crying:
That kernel and link are ancient, I wouldn't flash even if you paid me $809,786.00 dollars. There's plenty 0f roms around forum with proven track records. Update you recoveryand your odin try flashing again.
Pp.
Also this Kernel is from 2012 - CM 11 wasn't released
Send from OnePlus One using Tapatalk
After installing blisspop (or I don't really remember), I realized that WiFi wasn't working and neither was bluetooth so I decided to flash Extended Stock Kernel kernel, first with flashing the boot, then flashing the zip from recovery mode and even after that, the result was the same. It didn't work. Later on I went to the Phantom kernel's page and flashed that without checking that the kernel was meant for 4.4 and it bricked my device. Now, whenever the phone starts, it shows the Phantom kernel boot at start with its logo without any led light appearing below and due to that I'm unable to go into either flashmode or fastboot. It keeps restarting the Phantom boot at start and doesn't go any further. Please help!
EDIT: A more detailed version that I wrote a few months ago to the kernel's developer.
-
Previously I had my Xperia L reset on stock ftp then flashed the Extended Stock Kernel on it. Since the wifi wasn't working, I tried to download R17 and flashed it through CWM and now the phone keeps restarting on the Phantom Logo. It shows the logo, waits for about 10 seconds then restarts and the same keeps repeating. I saw it was for Kitkat but then too I insisted on installing. I can't access neither bootloader nor recovery mode. The light which comes when the Phantom Logo pops doesn't appear either. Can you help me please? Anything would be greatly appreciated. I know I did a stupid thing but I really don't want to give up on this device.
-
Xephor_EX said:
After installing blisspop (or I don't really remember), I realized that WiFi wasn't working and neither was bluetooth so I decided to flash Extended Stock Kernel kernel, first with flashing the boot, then flashing the zip from recovery mode and even after that, the result was the same. It didn't work. Later on I went to the Phantom kernel's page and flashed that without checking that the kernel was meant for 4.4 and it bricked my device. Now, whenever the phone starts, it shows the Phantom kernel boot at start with its logo without any led light appearing below and due to that I'm unable to go into either flashmode or fastboot. It keeps restarting the Phantom boot at start and doesn't go any further. Please help!
EDIT: A more detailed version that I wrote a few months ago to the kernel's developer.
-
Previously I had my Xperia L reset on stock ftp then flashed the Extended Stock Kernel on it. Since the wifi wasn't working, I tried to download R17 and flashed it through CWM and now the phone keeps restarting on the Phantom Logo. It shows the logo, waits for about 10 seconds then restarts and the same keeps repeating. I saw it was for Kitkat but then too I insisted on installing. I can't access neither bootloader nor recovery mode. The light which comes when the Phantom Logo pops doesn't appear either. Can you help me please? Anything would be greatly appreciated. I know I did a stupid thing but I really don't want to give up on this device.
-
Click to expand...
Click to collapse
yea.... output battery... reinput it.... DONT TOUCH POWERBUTTON.... holf vol - and connevt to pc
Sent from my Xperia T using XDA Free mobile app
SdtBarbarossa said:
yea.... output battery... reinput it.... DONT TOUCH POWERBUTTON.... holf vol - and connevt to pc
Sent from my Xperia T using XDA Free mobile app
Click to expand...
Click to collapse
-
It worked, I flashed the generic ftf and everything's okay. Thank you so much!
-
Hello, today I updated my phone to the latest CM13 Nightly and it was going well. Then my AK Kernel Updater notified me to update the Kernel so I did. After rebooting my phone, it is stuck on the AK Kernel screen for a few minuted (2 - 5 minutes) then my screen turns black but my phone is still running in the background but I cannot view the screen (I can use the buttons and can press icons on the screen randomly) Any tips without wiping my phone from it's data?
ronaldonater said:
Hello, today I updated my phone to the latest CM13 Nightly and it was going well. Then my AK Kernel Updater notified me to update the Kernel so I did. After rebooting my phone, it is stuck on the AK Kernel screen for a few minuted (2 - 5 minutes) then my screen turns black but my phone is still running in the background but I cannot view the screen (I can use the buttons and can press icons on the screen randomly) Any tips without wiping my phone from it's data?
Click to expand...
Click to collapse
Wipe system and reflash ROM + gapps should be back on stock kernel then
Sent from my A0001 using Tapatalk
If you made a Nandroid backup before, just hold down the power button until the phone hard shuts down, boot into recovery, and restore your old backup
Just dirty flash over your ROM. It will change the kernel to it's stock state. This is what I do every time I'm running into a problem like this.
There is no ak kernel for CM13. Just check next time the thread.
Hi, I don't know what to do anymore, I can't flash any rom because phone reboots by itself when im in recovery, after 15-20 second it restarts, I tried to flash stock rom using odin but same thing happens, when new stock rom booted when I come to that part where I need to setup a langugage it shuts off all by itself and reboot, I can't charge him because same thing happens and I have about 30% battery left so don't have much time to fix this problem, did anyone had that kind of the problem?
after flashing new rom, go to recovery and do factory reset or wipe all data. and try new charger
Sent from my E6653 using Tapatalk
what about this, it says there is some bug and phone turn off in the middle of backup or when I'm installing new rom? I think that the same thing is happening to me, I tried fixed recovery but no luck, phone is still turning off after 20 seconds in recovery, I would like to install cm 11 but as soon as installation starts phone turns off in recovery
i think this could be some problem with hardware, i have galaxy s plus for 6 years, and few days ago i played it, and flashed pacman rom 4.2.2, all i had is some problems with newer twrp recovery, but after i flashed twrp 2.2.2.1 and everything was fine later.
gs+ was one of my favorite android phone, so easy to flash custom roms.
Sent from my E6653 using Tapatalk
everything was ok 4 years until I flashed cm 12, it was slow and I wanted to flash cm 11 but when I tried to flash it after 30% installation phone shut off, from then I can't flash nothing normally
in order to flash cm 12 I had to format data partition to ext4, maybe that is the problem with restarting?
it could be, I dont have that phone anymore, my sister's son is using this phone right know as a toy
Sent from my E6653 using Tapatalk