[ROM][Umi Zero ] Arcatarc's "UmiZeroValencia" - UMi ZERO ROMs, Kernels, Recoveries, & Other Develo

UmiZeroValencia
Hello to all my friends ... you believed that I had abandoned you?
But here I am with a new creation:
UmiZeroValencia
A new Rom with a stunning interface that combines the slenderness of the stock rom to the beauty and convenience of an interface similar to MIUI.
it is useless to talk yet,the images are better than a thousand words!
Obviously feedback & DONATIONS are wellcome!
Arcatarc.
----------------------------------------------
ABOUT ROM:
Themes Support
New Modem/Baseband with support for more frequecies
Fully Odexed for speed&memory optimizations
Added/replaced some apps with better ones
To my comparisons CAMERA quality seems much better than stock one.(need confirmations)
FULLY FUNCTIONAL IN EVERY SINGLE PART!(except specific features of ported device )
Language: MULTILANGUAGE
Gapps:INCLUDED
Root:ROOTED(Busybox&Su binary)
BUGS: You tell me.
ART not supported(don't enable it in Developer Settings to avoid bootloop)
----------------------------------------------
INSTALLATION:
1: DOWNLOAD Rashr - Flash Tool from Google Market (to flash Recovery)
2: DOWNLOAD&FLASH MY ADVANCED RECOVERY(this version will backup/restore partitions usefull for IMEI,S/N,MacAddress etc...)
3: Download UmiZeroValencia_081015
--------------------------------------------------------------------------------------------------------
Once you are in recovery mode make a full backup of your actual rom.
--------------------------------------------------------------------------------------------------------
4: Now ( note:due to the fact some people had problem during this step in TWRP-Settings select "Use rm -rf instead of formatting.")select: Wipe-Advanced Wipe and tick: Dalvik Cache,System,Cache,Data.
5: (Without exit from recovery) install the rom zip......
.....OK!....NOW YOU'RE ON UmiZeroValencia ROM and you can start enjoy/test it....
If you like my works an offer is greatly appreciated not only by me (50% will be donate to UNICEF)
DONATIONS
DONATIONS
DONATIONS

Screenshots
Screenshots

Service pack
Service pack

ADDONS:
ADDONS:
KERNELS:
1.7Ghz(default one in rom zip)
2.Ghz
Flashables in Recovery.

CHANGELOG:
CHANGELOG:

BUGS&TIPS
BUGS&TIPS

Thanks @arcatarc
just sent a thank you for all your hard work.
I've been running your MI version. Yesterday was a bad one, it reset 3 times within an hour while on calls so I'm looking forward to trying this one.
Do I need to do anything special to upgrade to this one?
Rob

robiom said:
Thanks @arcatarc
just sent a thank you for all your hard work.
I've been running your MI version. Yesterday was a bad one, it reset 3 times within an hour while on calls so I'm looking forward to trying this one.
Do I need to do anything special to upgrade to this one?
Rob
Click to expand...
Click to collapse
Many tnx to you my friend ,no..you don't need to do nothing special..simply follow instructions..
Ciao Rob..

Just a thought....do I need to flash the kernel?
Forget it. Realised it's in the rom. Which one, 1.7GHz or 2GHz?

robiom said:
Just a thought....do I need to flash the kernel?
Forget it. Realised it's in the rom. Which one, 1.7GHz or 2GHz?
Click to expand...
Click to collapse
ROM have 1.7ghz by default,i post both versions so peoples can switch and try them without need to reflash the rom.

Hey,
Is BT working properly ? With car kit, pairing etc...
Sent from my ASUS_Z00AD using XDA Free mobile app

hellfreezover said:
Hey,
Is BT working properly ? With car kit, pairing etc...
Sent from my ASUS_Z00AD using XDA Free mobile app
Click to expand...
Click to collapse
No problem (using Alfa Romeo blue&me)

Many tnx to all my generous friends:
Many tnx to all my generous friends: :highfive:

Installed and looking good. No resets so far so hopefully this rom is more stable.
Thanks @arcatarc
Rob

Very good. Thank you arcatarc

(UPDATE 02/11/15)Arcatarc's "EMUmIZERO"

MIUmI7.1Stabile(stable) is out for testing:
http://forum.xda-developers.com/showpost.php?p=64689240&postcount=542

If someone get (set_metadata: some changes failed E: error executing updater binary in zip) just mount your system and it should work.

OrdenKrieger said:
If someone get (set_metadata: some changes failed E: error executing updater binary in zip) just mount your system and it should work.
Click to expand...
Click to collapse
Thanks for your advice, because I just struggled with this problem.

arcatarc said:
Many tnx to all my generous friends: :highfive:
Click to expand...
Click to collapse
Hello mister,
do you recomend this one or superleggera? which one is more smoth/battery friendly?
thx

Related

[ROM]CyanogenMod 10.2 Discussion/Download [20/12]

If you haven't already seen/heard with have CM 10.2 thanks to KonstaT: http://www.modaco.com/topic/365330-devrom249-cyanogenmod-102-android-43/page-8
This thread is designed for XDA users to be able to see what's going on and discuss here, not all of us are MoDaCo users!
cm-10.2-20131220-KonstaKANG-blade.zip
Download the ROM here: http://d-h.st/doc
md5:11913723d5473145aa34176627337dc4
gapps-jb43-20130924-KonstaKANG.zip
Download GApps here: http://d-h.st/Ml3
md5:4e3d5a2b1ae256486b900498c657fd38
You need a 180mb /system for this, you can take stuff out before you flash to reduce it, if you know what you're doing!
Depreciated unofficial build is available here: http://www.mediafire.com/?i5gw64737cf7tas
This is still all KonstaTs work, I've just synced with the latest sources so it is slightly more up to date.
Working:
Code:
Wifi
RIL (mobile network & data)
GPS
Bluetooth (& bt-tethering)
Audio (playback/input/routing/headphones/etc)
Camera (photos, camcorder & panorama)
Hardware acceleration and OpenGL rendering
Hardware video decoding & encoding
SD card
USB-storage & adb
USB-tethering
Wifi-tethering
Touchscreen/multi-touch
Sensors
LEDs
FM radio
Everything seems to work fine!
CHANGELOG
20.12. changelog:
CM 10.2.0 final
WhisperPush (merged)
11.10. changelog:
android 4.3.1
24.9. changelog:
fixed data indicator arrows in wifi/signal icons
added vibrator intensity tuning (Settings -> Device - More... -> Vibrator intensity)
updated google apps package to fix initial device setup
22.9. changelog:
initial release
07/10, new build up, just synced latest sources, all up to date.
credits to konstat for the original
http://www.mediafire.com/download/kovy3dcp7pwjrhl/cm-10.2-20131007-UNOFFICIAL-blade.zip
MD5: B26D3A0C43DF2D23922A4C966CB7BC9D
matt4321 said:
07/10, new build up, just synced latest sources, all up to date.
credits to konstat for the original
http://www.mediafire.com/download/kovy3dcp7pwjrhl/cm-10.2-20131007-UNOFFICIAL-blade.zip
MD5: B26D3A0C43DF2D23922A4C966CB7BC9D
Click to expand...
Click to collapse
Hi
Great to see Blade advancing. Just downloaded your update and installed. I came fro CM 9
Keep up the good work.
Stransky
Sent from my iPhone using Tapatalk
Hi,
Tried this,But unfortunately didn't do it for me ! Many issues,
First and foremost the phone becomes incredibly slow,Second the FC of phone "Process.android.phone",The whether doesn't work.
So overall a bummer for me ! had to revert to CM7.2,If these things are worked out would love to have this.
Regards
handsome1_blr said:
Hi,
Tried this,But unfortunately didn't do it for me ! Many issues,
First and foremost the phone becomes incredibly slow,Second the FC of phone "Process.android.phone",The whether doesn't work.
So overall a bummer for me ! had to revert to CM7.2,If these things are worked out would love to have this.
Regards
Click to expand...
Click to collapse
Are you gen2? Big enough /system, you need a 180mb or you will have issues. It's all fine on my device. Did you wipe data? You must wipe data if you're coming from CM7.2, also make sure you have an up to date recovery
Sent from my LT30p using Tapatalk 4
Hi,
Are you gen2? Big enough /system, you need a 180mb or you will have issues. It's all fine on my device. Did you wipe data? You must wipe data if you're coming from CM7.2, also make sure you have an up to date recovery
Click to expand...
Click to collapse
Yeah I had converted my gen1 to gen 2 using gen1-gen2 tpt,Its now with 215Mb System,203mb Data,37Mb Cache !! I had completely wiped all data including dalvik,So that's not it !
It also gives FC on Trubecht or something ! Am not sure whats the issue but things not working that's the bottom line..
Regards.
handsome1_blr said:
Hi,
Yeah I had converted my gen1 to gen 2 using gen1-gen2 tpt,Its now with 215Mb System,203mb Data,37Mb Cache !! I had completely wiped all data including dalvik,So that's not it !
It also gives FC on Trubecht or something ! Am not sure whats the issue but things not working that's the bottom line..
Regards.
Click to expand...
Click to collapse
Did you flash KonsaKANG or the unofficial one I built?
Sent from my LT30p using Tapatalk 4
Hi,
Did you flash KonsaKANG or the unofficial one I built?
Click to expand...
Click to collapse
The one you built ! i,e the one in the second link.
Regards.
handsome1_blr said:
Hi,
The one you built ! i,e the one in the second link.
Regards.
Click to expand...
Click to collapse
I don't know sorry, works fine for me and noone seems to have complained over on Modaco, seems like it's just you. Not sure whats causing it
Sent from my LT30p using Tapatalk 4
Hi,
I don't know sorry, works fine for me and noone seems to have complained over on Modaco, seems like it's just you. Not sure whats causing it
Click to expand...
Click to collapse
Well thanks for the replies,will check for some more time as its not my primary phone !! May be it'll settle down after a day or two.
Btw any updates coming up ???
Regards.
handsome1_blr said:
Hi,
Well thanks for the replies,will check for some more time as its not my primary phone !! May be it'll settle down after a day or two.
Btw any updates coming up ???
Regards.
Click to expand...
Click to collapse
I'll sync and compile another build within the coming days, watch out for the 'official' builds on modaco
Sent from my LT30p using Tapatalk 4
Hi,
I'll sync and compile another build within the coming days, watch out for the 'official' builds on modaco
Click to expand...
Click to collapse
Thanks again for the same,Yes I Am on a constant watch there as well ! Am a member there too.
Regards.
handsome1_blr said:
Hi,
Thanks again for the same,Yes I Am on a constant watch there as well ! Am a member there too.
Regards.
Click to expand...
Click to collapse
out of interest what happens when you flash konstats' builds? are they the same/worse/better?
Hi,
out of interest what happens when you flash konstats' builds? are they the same/worse/better?
Click to expand...
Click to collapse
Didn't try at all,I straight away tried yours as it was more recent (with some more work done to better it by you I presume),If you say I will try that and report back.
Regards.
handsome1_blr said:
Hi,
Didn't try at all,I straight away tried yours as it was more recent (with some more work done to better it by you I presume),If you say I will try that and report back.
Regards.
Click to expand...
Click to collapse
Try it and see, I'd be interested to see the result. I'm only keeping it more up to date by syncing with the latest CyanogenMod source code
Sent from my LT30p using Tapatalk 4
Hi,
Try it and see, I'd be interested to see the result. I'm only keeping it more up to date by syncing with the latest CyanogenMod source code
Click to expand...
Click to collapse
Well tried it multiple times but fails to install,gives installation aborted message "Sdcard:Setparam error,(Status7)".
So had to reinstall yours,But before that I did some stuff which helped a bit !
I formatted the SD card to start a fresh,with nothing on the card I copied the repartition image folder and did the repartition again just to make sure its not the issue with partition or size !
Next tried the Kangs ROM and failed as mentioned above,Next tried yours and was able to successfully install the ROM,installed Gapps from Kangs (after reboot from the first boot)
Long story short,it now performs much faster and better then earlier,Don't know what was the issue earlier but its sort of sorted for now (although some lag persists,but guess have to live with it).
Thanks once again for the replies. Any guesses as to why the original one failed and not yours ??
Also can we expect FM to be operational in your next build ??
Regards.
handsome1_blr said:
Hi,
Well tried it multiple times but fails to install,gives installation aborted message "Sdcard:Setparam error,(Status7)".
So had to reinstall yours,But before that I did some stuff which helped a bit !
I formatted the SD card to start a fresh,with nothing on the card I copied the repartition image folder and did the repartition again just to make sure its not the issue with partition or size !
Next tried the Kangs ROM and failed as mentioned above,Next tried yours and was able to successfully install the ROM,installed Gapps from Kangs (after reboot from the first boot)
Long story short,it now performs much faster and better then earlier,Don't know what was the issue earlier but its sort of sorted for now (although some lag persists,but guess have to live with it).
Thanks once again for the replies. Any guesses as to why the original one failed and not yours ??
Also can we expect FM to be operational in your next build ??
Regards.
Click to expand...
Click to collapse
Weird, no idea what caused all those issues, but if it's now working then awesome! I can't get FM to compile with my builds for some reason, I may be missing some patches so I'll try again tomorrow. You can just take the FM apk out of KonstaKANG zip and install it to your system, that should work. But I'll compile and upload another build tomorrow regardless of FM compiling or not. I'll add FM to my /system from KonstaKANG tomorrow and double check it works, which it should (may need some other files), if it does then I'll just copy paste the FM apk across.
02/11 build here! Fresh synced sources
http://www.mediafire.com/?i5gw64737cf7tas
a90247eb59bc1e9d2ad0e3de0bb26b15
Hi,
Thanks buddy for the same !! flashed it and trying to see if this one does the job !!
If I can request you,I would like to request you kindly see and port this OS !
Shendu OS
I tried it and its very good and seems like a good option !
Regards.

[AROMA][USER-CHOICE]OTX - Bloatware Remover

After a lot of struggle, here I present you my project (codename: OTX) that helps the user to remove the apps easily using aroma!!
I found that there are some limitations in the aroma installer which made it difficult for me!
First of all, I know you would say that this script has been already made and you will try to report it to moderators that I am repeating but no one has made an aroma flashable installer in any of the xda thread and nothing has been made like this for any of the devices. Even though it is present, it is not user choosable. It just deletes blocks of applications and can sometimes be even without your notice.
Changelogs:
Added aroma
Added busybox
User choice on removing apps
Overcame aroma scripts limitation
Only deletable apps are shown to maintain stability
Download Links:
OTX: http://www.mediafire.com/download/799ix1k85ay9lb9/signed_OTX_BLOAT.zip
CWM: http://d-h.st/nLL
Report me if the links are dead!!
Installation Instructions:
Make sure your device is rooted and binaries are up to date.
Download signed_OTX_BLOAT.zip and ClockWorkMod provided.
Copy it in the root of the sd card.
Now reboot and access recovery mode.
Now flash ClockWorkMod and mount everything.
Now select "install zip from sd card" and click signed_OTX_BLOAT.zip and install it.
You are asked to select the files to be deleted in 11 checkbox selectable pages because of the limitation of aroma script.
If you don't want to delete anything in a particular page, just click next and proceed.
After uninstalling, reboot your device.
I have tested it in my device and I am proud to say that it works as per my expectations. Its stable but currently need testers for this tool.
Tested on:
Baseband Version: DDLK1
Kernel: Hells Fusion
This is my first project. So kindly test it and report the bugsconfused: if any) !!
This is the base version. New addons will be made soon!
[Q] In what way it is different from old script??
[A] The user have to modify the lines of the script so as to remove the apps that he/she don't like and it takes too much time to type one by one. But if you use my script, it will be a lot easier and saves time.
Note for developers: You can port this to any device but make sure you include my credits :good:
Thanks and Credits:
[email protected] for providing this awesome installer
Link to his post: http://forum.xda-developers.com/showpost.php?p=21755929&postcount=1
[email protected] for his basic installer script for removing bloatwares
Link to his post: http://forum.xda-developers.com/showpost.php?p=35725682&postcount=1
[email protected] for providing a list of system apps that are safer to remove
Link to his post: http://forum.xda-developers.com/showpost.php?p=27229805&postcount=1
[email protected] for providing his kitchen tool which I used to sign the zip file
Link to his post: http://forum.xda-developers.com/showpost.php?p=5626292&postcount=1
kartik [email protected] for he is my personal helper on whatsapp who cleared my doubts and gave me the basic idea on how all this works
Link to his profile: http://forum.xda-developers.com/member.php?u=5608673
XDA:DevDB Information
OTX - Bloatware Remover, a Tool/Utility for the Samsung Galaxy Y GT-S5360
Contributors
the_pirate_predator
Version Information
Status: Stable
Current Stable Version: v1.x
Stable Release Date: 2014-01-28
Created 2014-02-01
Last Updated 2014-02-01
RIL FIX
For some people who lost their network connectivity after removing application, download the Hyperion 8 RIL FIX and flash it. I have included the file.
Click here to download
Reserved
Screen Shots Added!
No time to make Build 2!!
Need some help!!
A dedicated guide for porting this device has been made:
http://forum.xda-developers.com/showthread.php?t=2638554
Its only for the developers and newbies and strictly not for noobs.
Looks good bro!
Nice work
Testing it now
seems cool,can we delete ALL kind of files or only apk and odex,i mean libs or init.d scripts etc?
Thanks for the review
-CALIBAN666- said:
seems cool,can we delete ALL kind of files or only apk and odex,i mean libs or init.d scripts etc?
Click to expand...
Click to collapse
Thanks for the review.
Currently, it deletes only apk and odex. I will try to implement these features in the next build.
looks promising let me try it
Awsom Work Bro GoinG To Try
GoinG To Try.....
Nice Work
+1 ThumB
...................
great work,i have tested and all was working like promissed,keep it up its very usefull.
Nice tool....
I think there is a way to remove the 10 selection limitation.
Sent from my GT-S5300 using Tapatalk 0.01a
1. Love doesn't need any reason.
2. Wanna speed up 3G (not 4G LTE)?
Here it is:
http://forum.xda-developers.com/showthread.php?t=2586876
Good work!!! Tested right now and works fine..Keep it up!!!!
really a nice work with Aroma...I think its only for stock rom user coz in custRom all blotware are already removed.....Hats up..
Why not you add a poll..
luqman98 said:
Nice tool....
I think there is a way to remove the 10 selection limitation.
Sent from my GT-S5300 using Tapatalk 0.01a
1. Love doesn't need any reason.
2. Wanna speed up 3G (not 4G LTE)?
Here it is:
http://forum.xda-developers.com/showthread.php?t=2586876
Click to expand...
Click to collapse
Thanks for the review sir. I heard that there is 7 selection limitation and made my project based on that. As you are saying as 10, will try to implement it in the next build!
Thanks for the review
san122 said:
Good work!!! Tested right now and works fine..Keep it up!!!!
Click to expand...
Click to collapse
Thanks for your review sir!
Thanks for the review
imElectronica said:
really a nice work with Aroma...I think its only for stock rom user coz in custRom all blotware are already removed.....Hats up..
Why not you add a poll..
Click to expand...
Click to collapse
Yeah! I agree with you sir!
I think this as a small project but literally, it consumed a lot of time on analysing what must be done to remove limitations on aroma!
So only not added poll! Will add it now!
And thanks for reviewing!
great work! i'll try it when i will re-flash my stock rom. it will be a great help to stock users! :good:
Nice tool. Will surely try it. :good:
Thanks for the review
killoid said:
great work! i'll try it when i will re-flash my stock rom. it will be a great help to stock users! :good:
Click to expand...
Click to collapse
I agree with you sir that it is mostly helpful for stock users.
Thanks for the review!!
Thanks for the review
MuSaddiq said:
Nice tool. Will surely try it. :good:
Click to expand...
Click to collapse
I hope my tool will be useful!!
Thanks for the review!!
the_pirate_predator said:
Yeah! I agree with you sir!
I think this as a small project but literally, it consumed a lot of time on analysing what must be done to remove limitations on aroma!
So only not added poll! Will add it now!
And thanks for reviewing!
Click to expand...
Click to collapse
Welcome Sir.... we always happy to see new devs coz we get lots of tricks frm them...

Best mix rom+kernel. Tweaked 3.0 + ColonelX R22

Hi everybody.
First of all, THIS IS NOT MY DEVELOPE. Just want to share and add my water drop.
I have been looking for a good mix rom/kernel, and searching I met this mix.
ROM
T-MOBILE rom TWEAKED 3.0. Its creator is @dwitherell, ando the original post is this so please, do not forget to hit there the Thanks button. IT IS AN AMAZING ROM.
Rom download link:
Note 3 UVUDNF1 Tweaked 3.0
Basic approach
N9005 fix. Thanks a lot to @micky387 forma this. Please hit the Thanks button there.
Installation: it is recomended by rom's developer to use twrp.
0) Download the 3 files before to your sdcard.
1) Make a nandroid backup.
2) Wipe data/factory reset in CWM Recovery. You need it yes, so this means you will trip your knox.
3) Install first the basic approach. It is an Aroma Installer, and follow instruction for the installation.
4) WITHOUT REBOOT, install Note 3 UVUDNF1 Tweaked 3.0
5) WITHOUT REBOOT, install the fix and reboot.
KERNEL
After a lot of tries, this is the best working for me performance/battery. It is ColonelX kernel. Link to original post. Thanks a lot to @itsmikeramsay for this great job. Please press Thank button there.
Download link.
Installation:
0) Download file to sdcard.
1) Make a nandroid backup.
2) install the file with CWM Recovery and reboot
Bugs
- Some users have reported an issue when touching screen, hardware button's lights switch on.
I made a bash script with almost all my kernel settings. Only have to unzip the file,paste it in /system/etc/init.d change permission to 777 and reboot.
FILE
Update 4/8/14: new kernel settings for smartmax. Very battery friendly with low uv. Find file attached below.
CHECK BEFORE COPYING THE UV TABLE IN THE FILE AND CHANGE IT TO YOUR NEEDS. I am not responsible form what happens if your do not check it
This works too
Posted by a Galaxy Note 3!
Outstanding Rom..
galaningenieros said:
Hi everybody.
First of all, THIS IS NOT MY DEVELOPMENT
Click to expand...
Click to collapse
Outstanding find, sir, and even better that this combined rom and kernel work for your device.
Might I ask, though, why you are posting links to the works of others, and with a persistent request for donations in both your signature line and profile?
These two outstanding gentlemen, @dwitherell and @itsmikeramsay have done an incredible amount of work to get this rom finely tuned to the point of excellence. I believe that solely them, and none other, should benefit from their hard work.
Of course, this is only my opinion, and I will leave the judgment as to what is best in their good hands.
Many thanks for pointing out that these excellent devs' work can be used by many.
micmars said:
Outstanding find, sir, and even better that this combined rom and kernel work for your device.
Might I ask, though, why you are posting links to the works of others, and with a persistent request for donations in both your signature line and profile?
These two outstanding gentlemen, @dwitherell and @itsmikeramsay have done an incredible amount of work to get this rom finely tuned to the point of excellence. I believe that solely them, and none other, should benefit from their hard work.
Of course, this is only my opinion, and I will leave the judgment as to what is best in their good hands.
Many thanks for pointing out that these excellent devs' work can be used by many.
Click to expand...
Click to collapse
Thanks for your opinion. I changed my signature. I just want what you point at the end of your post. Let other know this is if not best, one of the best mix rom+kernel, and it is what really cares, isnt it?
galaningenieros said:
Thanks for your opinion. I changed my signature. I just want what you point at the end of your post. Let other know this is if not best, one of the best mix rom+kernel, and it is what really cares, isnt it?
Click to expand...
Click to collapse
Of course, in the large arc of general truths, the works of others being shared by many is in the finest spirit of these forums.
As to the removal of the donation link in your signature line and profile, I believe that was an honorable thing to have done.
How works are disseminated, and the means by which said development is placed into the hands of others does matter.
Leading with a general statement that something works for you and linking to that work is excellent. Your thread would be extremely helpful if it'd had been only that.
The significance is in the execution, not the intention.
If excellent work is distributed to others, then it is my humble opinion that the power of doing this resides solely in the hands of the developers, and none other.
I hope this clarifies.
Sent from my SM-N900P using Tapatalk
galaningenieros said:
Hi everybody.
First of all, THIS IS NOT MY DEVELOPE. Just want to share and add my water drop.
I have been looking for a good mix rom/kernel, and searching I met this mix.
ROM
T-MOBILE rom TWEAKED 3.0. Its creator is @dwitherell, ando the original post is this so please, do not forget to hit there the Thanks button. IT IS AN AMAZING ROM.
Rom download link:
Note 3 UVUDNF1 Tweaked 3.0
Basic approach
N9005 fix. Thanks a lot to @micky387 forma this. Please hit the Thanks button there.
Installation:
0) Download the 3 files before to your sdcard.
1) Make a nandroid backup.
2) Wipe data/factory reset in CWM Recovery. You need it yes, so this means you will trip your knox.
3) Install first the basic approach. It is an Aroma Installer, and follow instruction for the installation.
4) WITHOUT REBOOT, install Note 3 UVUDNF1 Tweaked 3.0
5) WITHOUT REBOOT, install the fix and reboot.
KERNEL
After a lot of tries, this is the best working for me performance/battery. It is ColonelX kernel. Link to original post. Thanks a lot to @itsmikeramsay for this great job. Please press Thank button there.
Download link.
Installation:
0) Download file to sdcard.
1) Make a nandroid backup.
2) install the file with CWM Recovery and reboot
Click to expand...
Click to collapse
could you upload your battery life ? ( screenshots would be welcomed )
shay2911 said:
could you upload your battery life ? ( screenshots would be welcomed )
Click to expand...
Click to collapse
Here you have a couple of what I got till now.
galaningenieros said:
Here you have a couple of what I got till now.
Click to expand...
Click to collapse
Thank you for the screenshots , could you include also the battery graph so I could grasp general idea about the battery composition ?
like the image on the Right on the example picture I have uploaded
Can i use theme from the original thread?
tugas2khas said:
Can i use theme from the original thread?
Click to expand...
Click to collapse
You should be able to. Hold on...let me confirm with the themer.
Sent from my SM-N900P using Tapatalk
tugas2khas said:
Can i use theme from the original thread?
Click to expand...
Click to collapse
As long as you are on tweaked yes you should..
shay2911 said:
Thank you for the screenshots , could you include also the battery graph so I could grasp general idea about the battery composition ?
like the image on the Right on the example picture I have uploaded
Click to expand...
Click to collapse
Sure, this is being my first complete charge cycle.
tugas2khas said:
Can i use theme from the original thread?
Click to expand...
Click to collapse
Yes, if you are on tweaked. I have tried two of them.
I am in abroad (srilanka), hotels wifi is very slow. bought mobile data to download this rom. Cant wait to test it.....
Sent from my SM-N9005 using XDA Premium 4 mobile app
Wi-fi not working (connecting but none internet)
I try this great rom but I have an issue with wi-fi.. Full wipe and followed the instructions, everything is Ok but only wi-fi is not working..Connecting to my wi-fi but no internet.. I tried another kernels but not fixed.. How can I fix it? Thx
[email protected] said:
I try this great rom but I have an issue with wi-fi.. Full wipe and followed the instructions, everything is Ok but only wi-fi is not working..Connecting to my wi-fi but no internet.. I tried another kernels but not fixed.. How can I fix it? Thx
Click to expand...
Click to collapse
did you flash the fix before reboot 1st time?
tugas2khas said:
did you flash the fix before reboot 1st time?
Click to expand...
Click to collapse
Yup.. Really really nice rom and themes but internet not works with wi-fi.. Mobile internet is good.
[email protected] said:
Yup.. Really really nice rom and themes but internet not works with wi-fi.. Mobile internet is good.
Click to expand...
Click to collapse
Try to clean cache and dalvik caché
Feed back please
galaningenieros said:
Try to clean cache and dalvik caché
Feed back please
Click to expand...
Click to collapse
tried now but no.. none internet.. I use TWRP recovery and I wonder the source of issue can be recovery? I'll change to Cwm and try again.. what do you think about it? it can be or not? Thx
Edit: Issue fixed.. The source of issue I guessed as it's recovery.. Full wipe and clean install on Philz Cwm Recovery and Voila.. It works.. Thanks guys for your efforts
Wenever i am touching the screen the soft keys besides the home button , light get turns on automatically .anyway to fix it?
Sent from my SM-N900T using XDA Premium 4 mobile app

[ROM][Umi Zero ]Arcatarc's ZerOmega(HiveUi)

[ROM][Umi Zero ]Arcatarc's ZerOmega(HiveUi)
Dear friends i present you ZerOmega Rom,a custom rom based on Xolo Hive Ui,a very light but powerfull Android interface with many interesting features like Themes,power management,antithief...etc,for more informations refer to the original webpage:
http://hiveinside.com/index.php#hardware-3
INSTALLATION (FOLLOW ALL THE STEPS TO AVOID ERRORS) :
1:DOWNLOAD Rashr - Flash Tool from Google Market (to flash Recovery)
2:DOWNLOAD ROM
3:DOWNLOAD RECOVERY(NEW VERSION WITH FIXED PARTITIONS LAYOUT)
4: Now select the downloaded recovery with a file explorer (Rashr - Flash Tool will ask you to flash it as recovery & reboot in recovery mode)and flash it
-----------------------------------------------------------------------------------------------------------
5: Once you are in recovery mode make a full backup of your actual rom.
-----------------------------------------------------------------------------------------------------------
6: Now ( note:due to the fact some people had problem during this step in TWRP-Settings select "Use rm -rf instead of formatting.")select: Wipe-Advanced Wipe and tick: Dalvik Cache,System,Cache,Data.
7: (without exit from recovery)Select Install and choose the rom zip (on upper part of the recovery screen you can select Internal Storage or SD Card).....
....reboot....
....OK!....now you are on ZerOmega!
VERY IMPORTANT:
Feedback&Contributions are well accepted...
If you like my works an offer is greatly appreciated not only by me (50% will be donate to UNICEF)
DONATIONS
DONATIONS
DONATIONS
Screenshots
Screenshots:
ADDONS:
ADDONS:
BUGS&TIPS
Bugs&tips:
Fully bugless!!!
FEATURES:
FEATURES:
Installed!
It seems a nice rom.
You are the best and a beer is on the way..
arna1958 said:
Installed!
It seems a nice rom.
You are the best and a beer is on the way..
Click to expand...
Click to collapse
...grazie caro(tnx my friend)
good work arcatarc.will try it soon.is it a light or a full version? which one you consider to be more battery friendly between supperleggera and this one?
DTS KO
I think that there is some problem with the music listening.
Every 30 second you can hear just only noise.
I tried also omich that gives you the possibility to play with DTS, but without result.
Any chance to fix it?
arna1958 said:
I think that there is some problem with the music listening.
Every 30 second you can hear just only noise.
I tried also omich that gives you the possibility to play with DTS, but without result.
Any chance to fix it?
Click to expand...
Click to collapse
I've notice it too..hope to fix it asap..
travoltas said:
good job arcatarc.will try it soon.is it a light or a full version? which one you consider to be more battery friendly between supperleggera and this one?
Click to expand...
Click to collapse
This is a full Hive rom (i haven't removed nothing)about battery we need more testing to say..
arna1958 said:
I think that there is some problem with the music listening.
Every 30 second you can hear just only noise.
I tried also omich that gives you the possibility to play with DTS, but without result.
Any chance to fix it?
Click to expand...
Click to collapse
Ok,i've found the problem...Dts licensing need to read the product model to work good..
In build.prop change this value:
ro.product.model=Umi Zero
TO
ro.product.model=Omega 5.5
(Replace "Umi Zero" with "Omega 5.5")
arcatarc said:
Ok,i've found the problem...Dts licensing need to read the product model to work good..
In build.prop change this value:
ro.product.model=Umi Zero
TO
ro.product.model=Omega 5.5
(Replace "Umi Zero" with "Omega 5.5")
Click to expand...
Click to collapse
Great!! It works.
Thanks a lot!!:thumbup::thumbup:
Sent from my Omega 5.5 using XDA Free mobile app
arna1958 said:
Great!! It works.
Thanks a lot!!:thumbup::thumbup:
Sent from my Omega 5.5 using XDA Free mobile app
Click to expand...
Click to collapse
.....and now you got a Xolo Omega 5.5
Arcatarc, what about a mod from xperia e4 (e2115). There is afew mod for several phones like gionee and micromax. Fully modded included stamina mod and camera.
eryen said:
Arcatarc, what about a mod from xperia e4 (e2115). There is afew mod for several phones like gionee and micromax. Fully modded included stamina mod and camera.
Click to expand...
Click to collapse
I have had start to port it some weeks ago...but i have encountered some problems during boot...in the next days i will try again...
Hi @arcatarc
can I load this as an upgrade to the MU Rom you posted without losing all my settings and apps? I want to give it a try as I'm having intermittent problems with the camera not communicating so it fails!
Rob
---------- Post added at 03:56 PM ---------- Previous post was at 03:47 PM ----------
Hi @arcatarc
did I see a post from you saying you were working on a new MU rom version??
Rob
robiom said:
Hi @arcatarc
can I load this as an upgrade to the MU Rom you posted without losing all my settings and apps? I want to give it a try as I'm having intermittent problems with the camera not communicating so it fails!
Rob
---------- Post added at 03:56 PM ---------- Previous post was at 03:47 PM ----------
Hi @arcatarc
did I see a post from you saying you were working on a new MU rom version??
Rob
Click to expand...
Click to collapse
You can try it but I doubt it will work well,they are too different...about MIUmI tomorrow I will release the new version..
After three days I see:
Problem with email (gmail) notification the ringtone doesn't work in the right way.
Battery drain is little bit worst than 3.09 with 1.7Ghz kernel, but accetable.
In the weather widget I'm not able to setup my location. I installed another widget.
For all the rest the rom seems to work well.
Edit
I had two reboot. Normally I don't have it.
after a few hours the middle capacitive button stopped working....what can i do now? i dont think its hardware related because when i touch it it lights up normally but no function...
EDIT: I reflashed the rom and button is working again. i think that battery is a bit worse than superleggera,but i have not calibrated battery for this rom so maybe this is the reason..

[ROM PORT] HFS Material ROM For Tipo Dual (For LB/ULB)

HFS ROM For Tipo Dual!!​
Hello Tipo Dual Users! I'm Back with a new ROM Port, just for you!​
About ROM:
This ROM Port has the same Structure as the Original HFS ROM For Xperia Tipo, Only the necessary Changes to make it Compatible with Xperia Tipo Dual and BOTH SIMs are working!!
Based on the Latest HFS ROM Update by @pykfree !!
Additional Stuff Added to the ROM:
-Added Aroma installer
-Walkman Sound Enhancements Added
-Added System UI Choice screen
-Added swap memory option
How To Install:
-Download the ROM and the Update package, dump them to your phone
-Reboot to CWM recovery
-wipe data & cache & dalvik
-wipe /system (Go to mounts and storage> format /system> select yes)
-go back to main menu
-select "install from sd card"
-Browse to the ROM file and install it
-choose your options (systemUI and memory mount options)
-after installing the ROM install HFS Update Package
-Flash SuperSU Update and reboot
Done!!
Note About "Default SystemUI" for HFS ROM:
Please note that if you choose "Default systemUI" for HFS ROM during ROM installation,you can enjoy a Material-Like UI, But only 1 SIM signal will be shown, Don't worry, both SIMs will work, if you want to switch between SIMs with this systemUI, do the following:
-Go to settings
-Go to "Multi Sim Settings"
-select "Voice/USSD/MMI"
-select "Prompt"
Now you will be prompted to choose which SIM you want whenever you make a call!
Download Links:
Download the ROM from Here
Download the Update Package from Here
SuperSU Update from HERE (the link is the same from the original Xperia tipo thread)
Special Thanks to:
-Allah for helping me in my Hole life (Not just android development )
- @pykfree for his great ROM
- XDA Forum for giving me the chance to post my work, thanks xda !!!!
Hit Thanks if you like My work!!​
would you please upload the images for HFS ROM? thank you...
Screenshots are added
The Hitman18 said:
would you please upload the images for HFS ROM? thank you...
Click to expand...
Click to collapse
The ROM is Updated, some bugs were fixed
enjoy!
it shows the message like this after click on download - 'Sorry, the file link that you requested is not valid. Sign error.' Would you please suggest me how can I download the ROM?
The Hitman18 said:
it shows the message like this after click on download - 'Sorry, the file link that you requested is not valid. Sign error.' Would you please suggest me how can I download the ROM?
Click to expand...
Click to collapse
I tried to download the ROM files completely, no problems or whatsoever...
try again with the new links posted (updated the links)
if you are using an adblock software, disable it
do you have a problem with 4shared? or you have this problem with this file only?
if you have a problem with 4shared, I can upload the ROM to to another sharing site
wish you the best
akramhadji said:
I tried to download the ROM files completely, no problems or whatsoever...
try again with the new links posted (updated the links)
if you are using an adblock software, disable it
do you have a problem with 4shared? or you have this problem with this file only?
if you have a problem with 4shared, I can upload the ROM to to another sharing site
wish you the best
Click to expand...
Click to collapse
Actually my net connection is not that much fast and it's connection is variable like connected - disconnected and so on...
4shared is not allowing to resume the download. and I was getting problem to download this file only, but now I had download the files. thanks to you.
You are doing so much, so I can not ask you to bear more load by uploading the file to different sharing site.
Thank you and I will soon post my review for the rom.
Glad to hear it
The Hitman18 said:
Actually my net connection is not that much fast and it's connection is variable like connected - disconnected and so on...
4shared is not allowing to resume the download. and I was getting problem to download this file only, but now I had download the files. thanks to you.
You are doing so much, so I can not ask you to bear more load by uploading the file to different sharing site.
Thank you and I will soon post my review for the rom.
Click to expand...
Click to collapse
I hope you'll enjoy It
Assalamu'alaikum
great job! you made it dude!
but, actually I made a new version of HFS Material ROM.. improve material design interface, new feature, multipages lockscreen look like android 4.2+, update some system apps, etc.. but I'm too lazy to upload..
Wow cool...
pykfree said:
Assalamu'alaikum
great job! you made it dude!
but, actually I made a new version of HFS Material ROM.. improve material design interface, new feature, multipages lockscreen look like android 4.2+, update some system apps, etc.. but I'm too lazy to upload..
Click to expand...
Click to collapse
wa'alaikum Assalam
awesome work bro!
it would be wonderful if you provided us with your new awesome build, please do
high expectations for your new build bro! great work
wish you the best
XEDS
hello Dev.. This ROM is awesome you are amazing man!! I give you thanks for your great work! My question is: Can you make-build this ROM for my Xperia E Dual? pleasepleaseplease.. :/
akramhadji said:
wa'alaikum Assalam
awesome work bro!
it would be wonderful if you provided us with your new awesome build, please do
high expectations for your new build bro! great work
wish you the best
Click to expand...
Click to collapse
sorry buddy.. I can't..
I made three ROMs on few months ago.. but, my internet is too slow and I have overheat problem with my modem in every minutes..
Hello there!
Nickcj0 said:
hello Dev.. This ROM is awesome you are amazing man!! I give you thanks for your great work! My question is: Can you make-build this ROM for my Xperia E Dual? pleasepleaseplease.. :/
Click to expand...
Click to collapse
Hello bro, I know you are exited about this ROM, I've received some other porting requests (xperia miro also)
Ok, but you must know that I don't have these devices (I have xperia tipo dual only) so I'll need testers for this
I can work on it, but the results are not guaranteed, I will need testers if you are ready for it
it's OK
pykfree said:
sorry buddy.. I can't..
I made three ROMs on few months ago.. but, my internet is too slow and I have overheat problem with my modem in every minutes..
Click to expand...
Click to collapse
it's alright bro
I know that making awesome ROMs is both time and resources consuming, some roms may take days, some others may take even months
akramhadji said:
Hello bro, I know you are exited about this ROM, I've received some other porting requests (xperia miro also)
Ok, but you must know that I don't have these devices (I have xperia tipo dual only) so I'll need testers for this
I can work on it, but the results are not guaranteed, I will need testers if you are ready for it
Click to expand...
Click to collapse
I think, if you wanna port it to miro, you just need make a change on build.prop and change the kernel
because miro and tipo hardware is almost same.. cmiiw
akramhadji said:
it's alright bro
I know that making awesome ROMs is both time and resources consuming, some roms may take days, some others may take even months
Click to expand...
Click to collapse
my rom is ready to release.. but, my modem is overheat in every minutes and I'll lost my connection.. I need a new modem.. lol
thanks for the suggestion bro
pykfree said:
I think, if you wanna port it to miro, you just need make a change on build.prop and change the kernel
because miro and tipo hardware is almost same.. cmiiw
Click to expand...
Click to collapse
that's what I was exactly going to do
adding xperia miro stock kernel will lower the chances of getting it hard bricked
my rom is ready to release.. but, my modem is overheat in every minutes and I'll lost my connection.. I need a new modem.. lol
Click to expand...
Click to collapse
lol, I guess so
Hello, sorry for late reply....
Another superb ROM from you my brother....
I had used the HFS rom. it is really a great rom:good:. I liked the rom. but I found that the ROM was somehow hard on my mobile. mobile was not smooth and it was slow when I swipe the main menu. and one more thing I found is the battery was draining very fast.(without using mobile it drains in 1.5 days, otherwise in SIP it stands more than 2 days)so currently I switch back to the SIP. but really I liked it a lot. currently I bought a new device and it has not good battery backup(max 22 hours without using it), so I need my Tipo with max battery backup.
Thanks....
Welcome bro
The Hitman18 said:
Hello, sorry for late reply....
Another superb ROM from you my brother....
I had used the HFS rom. it is really a great rom:good:. I liked the rom. but I found that the ROM was somehow hard on my mobile. mobile was not smooth and it was slow when I swipe the main menu. and one more thing I found is the battery was draining very fast.(without using mobile it drains in 1.5 days, otherwise in SIP it stands more than 2 days)so currently I switch back to the SIP. but really I liked it a lot. currently I bought a new device and it has not good battery backup(max 22 hours without using it), so I need my Tipo with max battery backup.
Thanks....
Click to expand...
Click to collapse
This ROM was just a port from the original HFS ROM for Xperia tipo
Unfortunately, the lollipop UI seems to require more resources to make it run smoothly, try installing tweaks and a better kernel, because this ROM is mainly about Good theme.
and thank you for using my ROM!!
wish you the best
Will this work for Tipo Single Sim?
this is for Xperia tipo dual sim
jaydip95 said:
Will this work for Tipo Single Sim?
Click to expand...
Click to collapse
but there is a single sim version of the ROM in the thread
here is the Xperia tipo version, please thank the developer for his valuable work:
http://forum.xda-developers.com/xperia-j-e/development/rom-h-f-s-material-edition-release-t3097969
works like a charm!
good work bro:good::good:

Categories

Resources