{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am NOT resposible for any damage done to your device, your neighbor, or any other things you like/hate.
Introduction:
This is my first kernel for any Android device. I created it because I want to get the best out of my device. It initially started with some optimizations regarding SaberMod 4.9 compatibility but I tought why not optimize it even more.
About:
This Kernel is based on the official CM12 kernel, therefore it should work with any Rom using the stock CM kernel too (Like Carbon and Liquid). I run it together with Carbon here, all tests I do will also be done using Carbon. The Kernels features will get more with time
Features and Commit History:
Check 2nd Post!
Installation Instruction:
THIS DOES ONLY WORK ON UNLOCKED BOOTLOADER!
When you're on CM/a CM based Rom:
Flash the zip file in recovery
When coming from Stock:
Flash the boot.img included in your ROMs zip file using fastboot. Flash a CM based Rom then and flash the Kernel zip file again as the Rom overrides the Kernel.
Download:
M5 Kernel (Release Versions)
https://dl.myself5.de
M5 Kernel (Test Versions)
https://testing.myself5.de
Thanks/Credits:
DooMLoRD (and therefore all guys he thanked listed below) - for a lot of Commits
FreeXperia Team (especially Jerpelea) - for too many things!
Kali- - to help get the correct dtbTool parameters for a bootable kernel
Faux123 - for lots of patches, you rock dude!
koush & all CyanogenMod maintainers - for too many things!
Dees_Troy & TeamWin - for their excellent work on TWRP Touch Recovery
Phil3759 - for his excellent work on PhilZ Touch Recovery
myfluxi - for a lot of great patches
flar2 - for a lot of great patches
dbolivar- toolchain fixes
FranciscoFranco - for Cortex-A15 optimizations, bunch of other things!
CarbonRom Team - for too many things!
vishal-android-freak - for too many things!
phaseburn - for being a good friend and helping me with almost everything !
sreinst1 - for too many things!
infected_ - for help with SM!
pec0ra - for fast_hotplug
AndroPlus - for too many things!
sparksco - for the SaberMod Toolchain
YoshiShaPow and Frap129 - for SaberNaro Toolchain
Team AOSPAL - for the Kernel Optimizations
Panic Brothers - for sponsoring me a Z3C!
My Big Brother Eric - for helping me keeping focused on Development!
My friends Silas and Max - for letting me use their servers and being awesome!
If I forgot you, please tell me.
If you think I deserve a donation, I won't stop you
Thanks a lot to those who have donated!
Huge Thanks to @Panic Brothers who donated the Z3C to me! You Rock Bro!
XDA:DevDB Information
M5 Kernel, Kernel for the Sony Xperia Z3 Compact
Contributors
Myself5
Source Code: https://github.com/Myself5/android_kernel_sony_msm8974/tree/cm-12.1
Kernel Special Features:
Version Information
Status: Beta
Created 2015-05-22
Last Updated 2016-07-01
Changelog
Latest Version: V11.2
Changelog:
Version 1:
Initial Z2 Release
Introduce Optimized Buildflags in order to build with SaberMod 4.9
Add Intelliplug
Add Fastcharge
Add new CPU Govs: wheatley, Smartassv2 LionHeart, Lagfree, Intelliactive
Add new I/O Sheduler BFQ, fiops, SIO
Add Faux123 Sound Control
GPU OC to 657MHz, Idle on 27MHz and add 100MHz Step
Version 1.2
Fix D2W
Add fast_hotplug CPU Hoplug
Version 2:
Implement kexec-hardboot -> this allows the usage of MultiROM
CPU OC over 2.9 GHz -> We now can OC up to 3.03GHz
Version 3:
Add CPU Govs Intellidemand, smartassH3 and adaptive
Add IO Sheds VR, ZEN, SIO-Plus and tripndroid
Add Custom Logo
Fix simple ondemand GPU Gov and add conservative
Version 4:
Add 268MHz CPU Step -> CPU can now idle on lower CPU freq and save battery
Add Alucard Hotplug and CPU Gov
Add ElementalX Gov
Revert OC Ability to 3GHz -> 3GHz was just not stable
Add KCAL support
Add F2FS Support
Initial Z3 Bringup
Version 5:
Add Bricked Hotplug
Add new CPU Govs Alucard, HYPER, OndemandPlus, Nightmare, Darkness, PegasusQ, Smartmax
Remove F2FS Support again -> Seems not to be very stable
Version 5.1:
Revert Custom Bootsplash -> together with the new Display Drivers it made the device not to boot anymore
Version 6:
Fix for Z3* Touch in MultiROM -> updated Clearpad Touch Driver
Initial Z3 Compact bringup
Version 7:
Add slim and zzmoove CPU Gov
Initial Z1 Compact bringup by @oshmoun
Enable F2FS Again
Update Alucard, Darkness and Nightmare Govs
Update BFQ I/O Shed
Update Alucard Hotplug
Rebase IntelliPlug to faux123's latest Version
Version 8:
Fixed F2FS, thanks to @Hazou
Finally implement Intelli_Termal V2, thanks to @someone755 and @oshmoun
Updated alcurd, nightmare, darkness
Version 9:
Initial Z1 bringup by @oshmoun and @Langes
Kernel Zip is now based off AnyKernel2 by @osm0sis, this allows the installation on every Rom using CM Kernel, even if it has a different Ramdisk than CM, like Mokee and Slim
Version 10:
Initial Bringup for Sony Xperia Tab Z2 (LTE and Wifi) thanks to @rcstar6696
Fix Kernel install issues with AnyKernel2
Display Kernel Version in Settings (Change Localversion from M5-Kernel to M5-Kernel-*VERSION*
Add Adreno_idler
Update zzmoove to Version 1 Beta 8
Fix a bunch of Display issues (like Black lines) on Z1C
Add mac80211 injection patch and HID patch for keyboard support
Version 10.2:
Fix Soft Reboots on rhine devices
Add Oneshot Sync
Tweak kgsl
Fix loading of LZMA Compressed Recoverys
Version 11:
Probably the last 3.4 M5 Kernel release, we will start working on M5 Kernel based on the Sony 3.10 AOSP Kernel soon.
Merge CM Upstream (Includes merge of Sony 23.4.A.1.200/23.4.A.4.6)
Fix static noise on high-end headphones
Various zRAM fixes and improvements
Merge of Linux Kernel upstream to get the kernel base to 3.4.111 (latest 3.4 Kernel available)
@tomascus rules.
Version 11.1:
Fix sound again by reverting the previous sound fixes
Version 11.2:
Recompile Kernel because thanks to the Server failure we lost some of the V11.1 builds.
All Versions since V4:
Support for LZMA compressed Recoveries like MultiROM TWRP (http://review.cyanogenmod.org/#/c/89057/)
[Only for V*-Permissive] SELinux Permissive for use with Xposed Framework (http://review.cyanogenmod.org/#/c/78551/)
All Version included the newest CM Upstream Changes from the Day they got compiled. Version which are not mentioned explicitly did only include a CM Upstream update.
For a detailed Changelog, check the Github Commit history:
Lollipop
https://github.com/Myself5/android_kernel_sony_msm8974/commits
Bla bla first bla bla
You don't know how long I've spent F5'ing the Z3C development page lol.
Also
This is my first kernel for any Android device.
Click to expand...
Click to collapse
Don't believe this man, he does great work with kernels on other Xperia devices!
I find it odd though that the kexec page address value for the Z3C differs from the Z3 and Z2 -- got any explanation on that? (My first guess would be that's because it has less RAM but I'm tired and pretty sure that's wrong.)
Great Work man
First of all, thanks a bunch for all your hard work @Myself5!!
Our Z3Cs need a serious kernel, feel like this could be it. I've noticed you uploaded 2 different V6 versions for Z3Cs - normal and permissive? Could you explain the difference?
Thanks again for all your input, and happy flashing everyone.
Cr1ms0n said:
First of all, thanks a bunch for all your hard work @Myself5!!
Our Z3Cs need a serious kernel, feel like this could be it. I've noticed you uploaded 2 different V6 versions for Z3Cs - normal and permissive? Could you explain the difference?
Thanks again for all your input, and happy flashing everyone.
Click to expand...
Click to collapse
Permissive has SELinux mode set to permissive (for usage with XPosed), while the normal one has the stock SELinux Settings, being Enforced.
someone755 said:
Bla bla first bla bla
You don't know how long I've spent F5'ing the Z3C development page lol.
Also
Don't believe this man, he does great work with kernels on other Xperia devices!
I find it odd though that the kexec page address value for the Z3C differs from the Z3 and Z2 -- got any explanation on that? (My first guess would be that's because it has less RAM but I'm tired and pretty sure that's wrong.)
Click to expand...
Click to collapse
Thats totally correct. The Z3C has 2GB RAM compared to the Z2 and Z3 having 3GB. Hence the Positions needed for the kernel inside the RAM Banks are different too -> Different Kexec Hardboot value.
Myself5 said:
Permissive has SELinux mode set to permissive (for usage with XPosed), while the normal one has the stock SELinux Settings, being Enforced.
So if I'm planning to use Xposed I need to flash the permissive version is that right?
Click to expand...
Click to collapse
Just Flashed m5 kernel (release version)
works perfectly.
Thanks for all your hard work
Tested on PAC Rom. Working good! Seems to be a little more battery consuming compared to stock CM kernel.
I thought so to, but am gonna give it a day or so to settle. Much faster/responsive tho, apps etc are opening a lot faster so is browser imo
Flash v6 se permissive in last cm. Reboots constant.
tatanico said:
Flash v6 se permissive in last cm. Reboots constant.
Click to expand...
Click to collapse
Have you tried latest cm with it's own kernel? bcs m5 permissive kernel works with nightly from May 19
Just a question about xposed and selinux. I'm running a stock 5.0.2 with xposed on my phone, selinux status set to enforcing. Why is permissive needed with cm and this kernel? Just curious.
Kernel and last cm 23/05 not work god.
Hello!
I've got the latest cm nightly ( 24.05.2015 ), with latest M5-Kernel-V6-L. I think everything works fine, the system speed little bit faster then the cm's kernel. The processor cores using are better. In stand by, it's uses only one core, not two core like cm. But! With M5 kernel, wifi doesn't work. I can't run it. If i turn it on, nothing. It's doesn't find any wifi. And it's going back to off... Am I the only one with that error? I doesn't try M5 kernel before.. I missed something? I'm not at home, but if I arrived, I can make a Logcat if it help.
Sent from my Xperia Z3C using XDA Free mobile app
lba810701 said:
Hello!
I've got the latest cm nightly ( 24.05.2015 ), with latest M5-Kernel-V6-L. I think everything works fine, the system speed little bit faster then the cm's kernel. The processor cores using are better. In stand by, it's uses only one core, not two core like cm. But! With M5 kernel, wifi doesn't work. I can't run it. If i turn it on, nothing. It's doesn't find any wifi. And it's going back to off... Am I the only one with that error? I doesn't try M5 kernel before.. I missed something? I'm not at home, but if I arrived, I can make a Logcat if it help.
Sent from my Xperia Z3C using XDA Free mobile app
Click to expand...
Click to collapse
Yes WiFi lost here.
6.1 is coming
Compiling and uploading 6.1 ATM. No changes exept the merge of the CM Upstream branch. 6.1 is now working with the latest CM Builds.
Also it's the first fully automated build on my jenkins setup (using the fileserver as a host and my friends homeserver as the buildserver) so don't be confused if the Kernel build host is "[email protected]", thats my friends server. The Automation allows me to upload a new Kernel version faster in case of a CM upstream change.
Regards and Happy Flashing
Changelog is live
I just updated the Second Post, It now includes a Full Changelog, and therefore a Feature List too.
Have fun with it
I seem cannot set minimum CPU freq, it keeps turning back to 1958 MHz using kernel adiutor, trickster, and any app :/
Sent from my Xperia Z3C using XDA Free mobile app
reyhanpk said:
I seem cannot set minimum CPU freq, it keeps turning back to 1958 MHz using kernel adiutor, trickster, and any app :/
Sent from my Xperia Z3C using XDA Free mobile app
Click to expand...
Click to collapse
Using kernel adiutor, no problem here.
was12 said:
Using kernel adiutor, no problem here.
Click to expand...
Click to collapse
Solved it, the culprit was the vdd restriction.
Its all normal and smooth now
Sent from my Xperia Z3C using XDA Free mobile app
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
THIS KERNEL IS ONLY FOR AOSP/CM BASED ROMS
(= NOT COMPATIBLE WITH SONY FIRMWARES)
All the kernel features are controllable through Androguide.fr's Pimp My Z1 app, (thread here).
Features
Sound Control: Faux123's GPL Sound Control 3
Color Calibration Control: LCD_KCAL interface ported to the Z1 by @DooMLoRD, gives full control over the RGB channels of the display
GPU OC: 200MHz / 320MHz / 389MHz / 487.5MHz / 533MHz / 600MHz frequency scaling steps
CPU OC: up to 2.26GHz
CPU Voltage Control: use TricksterMod for the moment
Intelliplug: Faux123's latest intelliplug hotplugging driver with eco mode (v5.0)
MPDecision: showp1984's open-source & customizable msm_mpdecision hotplugging driver
Dynamic Fsync: Faux123's Dynamic File Sync v1.5
PowerSuspend: Faux123's power_suspend driver (replacing early_suspend)
Snake Charmer: Faux123's msm_cpufreq_limit CPU frequency limiter driver
Fast Charge: Faux123's fast_charge driver, allowing to set the amperage of the charger or USB port your device is plugged-in to
CPU Boost: Faux123's CPU Input Boost module (will soon add controls for it in Pimp My Z1)
GPU Wake-on-touch: allows touch events to wake the GPU if it was previously in slumber
KSM: Kernel Same-page Merging enabled
F2FS Support: Samsung's F2FS nand-optimized file system support
exFAT Support: Samsung's open-source exFAT driver
zRam Support: support for zRam memory compression
CPUPower: Linaro's cpupower PM driver
Async Fsync: Asynchronous file sync
MSM_Sleeper: Support for setting the max CPU frequency when screen is off through sysfs
Kernel mode NEON: NEON-accelerated XOR framework & support for NEON instructions in kernel mode
Overall Stats: CPU overall stats on a per-core basis
Compression: XZ Compressed & LZ4 compression algorithm support
Sched MC: Multi-Core Power Savings support
Sched SMT: Multi-Thread Power Savings support
Arch_Power: arch-specific power sched features enabled
Workqueue: backported from kernel 3.7, allows CPU hotplug to keep idle workers (learn more)
Toolchain: Built with Linaro GCC 4.9.2 toolchain from 14.04 release
Optimizations: Built with -O2 and many optimization flags
Kexec-hardboot ?: attempted to port @Tassadar's kexec-hardboot patches from the nexus 5, needs testing and confirmation that it works
Additional Governors:
ntellidemand
Intelliactive
Pegasusq
Nightmare
Hyper
Alucard
InteractiveX2
SmartassV2
Lagfree
Wheatley
Lionheart
Badass
Additional I/O Schedulers:
SIO (SImple Ondemand)
FIOPS (Fair Input/Output Per Second)
BFQ (Budget Fair Queueing)
VR
Additional TCP Congestion Algorithms:
BIC
Westwood
HSTCP
Hybla
HTCP
Vegas
Veno
Scalable
LP
YeAH
Illinois
Click to expand...
Click to collapse
Download
Release date: 2014-10-11Full-Pimped-Kernel-2014-10-12-amami.zip - 9.9 MB
Light-Pimped-Kernel-2014-10-12-amami.zip - 9.7 MB
All builds (current/previous) can be found here: Pimped Kernel Folder
These are test builds, and always tested prior to release, please provide feedback if you flash it
Click to expand...
Click to collapse
Disclaimer
Code:
# Neither me or any contributors to this kernel can nor will be held
# responsible for any damage or any kind of problem related to its use.
# You are using this piece of software AT YOUR OWN RISK.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
Sources
The sources are obviously covered by the General Public License, and are available on Androguide.fr's github at: https://github.com/PimpedKernel/android_kernel_sony_msm8974
Also you can find my fork of the sources (Light/Full) with the modifications I made to compile it for Xperia Z1 Compact at: https://github.com/RepoB/android_kernel_sony_msm8974-pimped
Click to expand...
Click to collapse
Credits
Thanks to Androguide.fr he made the whole kernel I just compiled it for Amami
Thanks to oshmoun he helped me a lot to get this kernel to be as great as it is now
Thanks to faux123 for all his contributions to the android kernel community, many of which are implemented here
Thanks to showp1984 for his msm_mpdecision hotplug driver
Thanks to DooMLoRD for all the cherry-picked features from his DoomKernel
Thanks to krabapel2458 for the inital port from DoomKernel of features like GPU OC, some governors and more.
And of course, thanks to FreeXperia and Kali- in particular, for the device bring-up
Click to expand...
Click to collapse
XDA:DevDB Information
PimpedKernel Kitkat - Amami, Kernel for the Sony Xperia Z1 Compact
Contributors
OmarEinea, oshmoun
Source Code: https://github.com/RepoB/android_kernel_sony_msm8974-pimped
Kernel Special Features: Sound Control, GPU OC, Intelliplug, PowerSuspend, Dynamic Fsync, exFAT, F2FS, KSM, Intellidemand, Intelliactive, SmartassV2, InteractiveX2, Lionheart, Wheatley, Badass, Lagfree, BFQ, SIO, FIOPS, Westwood, Hybla, HSTCP, HTCP, Veno, Illinois, LP, BIC...
Version Information
Status: Testing
Created 2014-05-30
Last Updated 2014-11-15
Changelo & To do list & Bugs:
Bugs
Please guys, this is a test build, it was tested on Carbon ROM and Resurrection Remix ROM,
but it has some stability issues, and you might face lots of bugs and software reboots while using it.
Will try to improve it, please give a nice feedback, and I'll enlist all bugs here.
Click to expand...
Click to collapse
To do list
Add dual recovery support [No recoveries included anymore]
Fix reboot to recovery in some ROMs [Done, I think!]
Enable tap to wake feature [Impossible]
Click to expand...
Click to collapse
Changelog
2014-10-11:
Fixed wlan, it should be working now!
2014-10-11:
Updated kernel with latest changes from CM & Pimped kernel
2014-05-30:
Initial release
Click to expand...
Click to collapse
ScreenShots
First here!!!! Great to see!!!! Already trying.
GPU OC in future update ?
omegastarr said:
GPU OC in future update ?
Click to expand...
Click to collapse
Maybe if I figure out why it isn't working, I mean GPU OC code is implemented in the kernel, but it's not working for some reason,
will see what I can do.
omarainea said:
...
Click to expand...
Click to collapse
Yay! Finally! Cyanogen, here I come!
TY, mate. Was waiting for this for a loooooooong time. Good job pulling it off =)
---------- Post added at 01:03 AM ---------- Previous post was at 01:02 AM ----------
omarainea said:
Maybe if I figure out why it isn't working, I mean GPU OC code is implemented in the kernel, but it's not working for some reason,
will see what I can do.
Click to expand...
Click to collapse
I'm not even sure that GPU OC works properly on Z1...
TheQwertiest said:
I'm not even sure that GPU OC works properly on Z1...
Click to expand...
Click to collapse
I'm not sure about that ether, but the weird thing is that even though the same code (as the one used for Z1) is included here,
you can't even switch GPU to more that 450MHz, I mean the GPU script has all 487.5MHz / 533MHz / 600MHz OCs but they aren't showing up
Tried it with pimp my z1
Didn't work. Specifically it crashes when any setting is changed from stock.
I'm on slimkat.
Running it on the latest CM11 nightly (31/5) and the phone momentarily freezes very shortly after boot before rebooting. Can't say what triggers it because it happens regardless of what I do.
Great work mate. The most important for me is the support for undervolting. Is it included in the kernel?
idimitro said:
Great work mate. The most important for me is the support for undervolting. Is it included in the kernel?
Click to expand...
Click to collapse
Yes it is, but you might find it buggy (for now)
@omarainea I have tested (not so much but anyway...) with carbon and resurection roms. RR install was cleaner I hadn´t utilized kernel settings beforkrnel install. Kernel works good, no reboots have changed a lot of settings without problems, on carbon phone reboots all the time but I had changed a lot of settings before kernel install. Later I will try more clean carbon installation with pimpkernel, for now I´m going with RR rom. Great work, thanks!
funiewski said:
@omarainea I have tested (not so much but anyway...) with carbon and resurection roms. RR install was cleaner I hadn´t utilized kernel settings beforkrnel install. Kernel works good, no reboots have changed a lot of settings without problems, on carbon phone reboots all the time but I had changed a lot of settings before kernel install. Later I will try more clean carbon installation with pimpkernel, for now I´m going with RR rom. Great work, thanks!
Click to expand...
Click to collapse
Can you outline the steps you took? I can't get it to work on mine both with Carbon and Slim.
ctap001 said:
Can you outline the steps you took? I can't get it to work on mine both with Carbon and Slim.
Click to expand...
Click to collapse
just did a clean Carbon or RR install, then boot to system, then reboot to recovery and flash the kernel without any wipes, reboot.
omarainea said:
just did a clean Carbon or RR install, then boot to system, then reboot to recovery and flash the kernel without any wipes, reboot.
Click to expand...
Click to collapse
By clean you mean doing a factory reset prior?
And would it matter if I wipe partition and dalvik after flashing the kernel?
Also have you tried it with ART? My crashes only happen when I was on Dalvik
ctap001 said:
By clean you mean doing a factory reset prior?
And would it matter if I wipe partition and dalvik after flashing the kernel?
Also have you tried it with ART? My crashes only happen when I was on Dalvik
Click to expand...
Click to collapse
By clean install I mean factory reset and format /system prior, and it didn't matter to me whether I wipe dalvik after flashing the kernel or not.
also, now that you're mentioning it, I haven't tried ART on Pimped kernel yet (just Dalvik).
omarainea said:
By clean install I mean factory reset and format /system prior, and it didn't matter to me whether I wipe dalvik after flashing the kernel or not.
also, now that you're mentioning it, I haven't tried ART on Pimped kernel yet (just Dalvik).
Click to expand...
Click to collapse
That step is always included in ROM instructions so I'm quite sure I did that. At first I thought the reboots were being caused by undervolting but even when I just changed the read-ahead in I/o settings I still get random crashes.
Hello!
Does the work kernel in the kit SlimRom? If so. I would like to test it!
thx
Sent from my D5503 using XDA Premium 4 mobile app
diabolica said:
Hello!
Does the work kernel in the kit SlimRom? If so. I would like to test it!
thx
Sent from my D5503 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Nope kit SlimRom is Sony based not cm-based ROM, this kernel is for cm-based ROMs.
if you're looking for a custom kernel for kit SlimRom you can try DooMKernel, I'll release v19 soon, so wait for it and try it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am NOT resposible for any damage done to your device, your neighbor, or any other things you like/hate.
Introduction:
About:
This Kernel is a port from the Z2/Z3/Z3C M5 Kernel based on the official CM12 kernel. It should work with any Rom using the stock CM kernel too (Like Carbon and Liquid). I'm mainly using PAC 5.1, and it's working sweet so far!
Installation Instruction:
THIS DOES ONLY WORK ON UNLOCKED BOOTLOADER!
CM Recovery not supported!
When you're on CM/a CM based Rom:
Flash the zip file in recovery
When coming from Stock:
Flash the boot.img included in your ROMs zip file using fastboot. Flash a CM based Rom then and flash the Kernel zip file again as the Rom overrides the Kernel.
Download:
M5 Kernel (Release Versions)
https://dl.myself5.de
M5 Kernel (Test Versions)
https://testing.myself5.de
Thanks/Credits:
Myself5 for making this kernel in the first place!
DooMLoRD (and therefore all guys he thanked listed below) - for a lot of Commits
FreeXperia Team (especially Jerpelea) - for too many things!
Kali- - to help get the correct dtbTool parameters for a bootable kernel
Faux123 - for lots of patches, you rock dude!
koush & all CyanogenMod maintainers - for too many things!
Dees_Troy & TeamWin - for their excellent work on TWRP Touch Recovery
Phil3759 - for his excellent work on PhilZ Touch Recovery
myfluxi - for a lot of great patches
flar2 - for a lot of great patches
dbolivar- toolchain fixes
FranciscoFranco - for Cortex-A15 optimizations, bunch of other things!
CarbonRom Team - for too many things!
vishal-android-freak - for too many things!
phaseburn - for being a good friend and helping me with almost everything !
sreinst1 - for too many things!
infected_ - for help with SM!
pec0ra - for fast_hotplug
AndroPlus - for too many things!
sparksco - for the SaberMod Toolchain
YoshiShaPow and Frap129 - for SaberNaro Toolchain
Team AOSPAL - for the Kernel Optimizations
If I forgot you, please tell me.
To donate to Myself5:
XDA:DevDB Information
M5 Kernel, Kernel for the Sony Xperia Z2 Tablet
Contributors
Myself5
XDA:DevDB Information
M5 Kernel for Z2 Tablet, Kernel for the Sony Xperia Z2 Tablet
Contributors
rcstar6696, Myself5
Kernel Special Features:
Version Information
Status: Alpha
Created 2015-09-11
Last Updated 2016-07-01
Latest Version: V11.2
Changelog:
Version 1:
Initial Z2 Release
Introduce Optimized Buildflags in order to build with SaberMod 4.9
Add Intelliplug
Add Fastcharge
Add new CPU Govs: wheatley, Smartassv2 LionHeart, Lagfree, Intelliactive
Add new I/O Sheduler BFQ, fiops, SIO
Add Faux123 Sound Control
GPU OC to 657MHz, Idle on 27MHz and add 100MHz Step
Version 1.2
Fix D2W
Add fast_hotplug CPU Hoplug
Version 2:
Implement kexec-hardboot -> this allows the usage of MultiROM
CPU OC over 2.9 GHz -> We now can OC up to 3.03GHz
Version 3:
Add CPU Govs Intellidemand, smartassH3 and adaptive
Add IO Sheds VR, ZEN, SIO-Plus and tripndroid
Add Custom Logo
Fix simple ondemand GPU Gov and add conservative
Version 4:
Add 268MHz CPU Step -> CPU can now idle on lower CPU freq and save battery
Add Alucard Hotplug and CPU Gov
Add ElementalX Gov
Revert OC Ability to 3GHz -> 3GHz was just not stable
Add KCAL support
Add F2FS Support
Initial Z3 Bringup
Version 5:
Add Bricked Hotplug
Add new CPU Govs Alucard, HYPER, OndemandPlus, Nightmare, Darkness, PegasusQ, Smartmax
Remove F2FS Support again -> Seems not to be very stable
Version 5.1:
Revert Custom Bootsplash -> together with the new Display Drivers it made the device not to boot anymore
Version 6:
Fix for Z3* Touch in MultiROM -> updated Clearpad Touch Driver
Initial Z3 Compact bringup
Version 7:
Add slim and zzmoove CPU Gov
Initial Z1 Compact bringup by @oshmoun
Enable F2FS Again
Update Alucard, Darkness and Nightmare Govs
Update BFQ I/O Shed
Update Alucard Hotplug
Rebase IntelliPlug to faux123's latest Version
Version 8:
Fixed F2FS, thanks to @Hazou
Finally implement Intelli_Termal V2, thanks to @someone755 and @oshmoun
Updated alcurd, nightmare, darkness
Version 9:
Initial Z1 bringup by @oshmoun and @Langes
Kernel Zip is now based off AnyKernel2 by @osm0sis, this allows the installation on every Rom using CM Kernel, even if it has a different Ramdisk than CM, like Mokee and Slim
Version 10:
Initial Bringup for Sony Xperia Tab Z2 (LTE and Wifi) thanks to @rcstar6696
Fix Kernel install issues with AnyKernel2
Display Kernel Version in Settings (Change Localversion from M5-Kernel to M5-Kernel-*VERSION*
Add Adreno_idler
Update zzmoove to Version 1 Beta 8
Fix a bunch of Display issues (like Black lines) on Z1C
Add mac80211 injection patch and HID patch for keyboard support
Version 10.2:
Fix Soft Reboots on rhine devices
Add Oneshot Sync
Tweak kgsl
Fix loading of LZMA Compressed Recoverys
Version 11:
Probably the last 3.4 M5 Kernel release, we will start working on M5 Kernel based on the Sony 3.10 AOSP Kernel soon.
Merge CM Upstream (Includes merge of Sony 23.4.A.1.200/23.4.A.4.6)
Fix static noise on high-end headphones
Various zRAM fixes and improvements
Merge of Linux Kernel upstream to get the kernel base to 3.4.111 (latest 3.4 Kernel available)
@tomascus rules.
Version 11.1:
Fix sound again by reverting the previous sound fixes
Version 11.2:
Recompile Kernel because thanks to the Server failure we lost some of the V11.1 builds.
All Versions since V4:
Support for LZMA compressed Recoveries like MultiROM TWRP (http://review.cyanogenmod.org/#/c/89057/)
[Only for V*-Permissive] SELinux Permissive for use with Xposed Framework (http://review.cyanogenmod.org/#/c/78551/)
All Version included the newest CM Upstream Changes from the Day they got compiled. Version which are not mentioned explicitly did only include a CM Upstream update.
For a detailed Changelog, check the Github Commit history:
Lollipop
https://github.com/Myself5/android_kernel_sony_msm8974/commits
No Reply ? Whats wrong has anyone test the kernel ??
Enjoy it
I'm using it now on my tablet with the latest tesla build and it works great. Is this the kernel in your pac build?
Frostbiter said:
I'm using it now on my tablet with the latest tesla build and it works great. Is this the kernel in your pac build?
Click to expand...
Click to collapse
Yes PAC includs the M5 Kernel but you can use the kernel on all Cm based Roms
10.1 is up
Hey guys, I managed to find some free time, and finally compiled and uploaded a 10.1 Build. Basically it only includes CM Upstream commits (about 200 of them), and should work flawless with the newest CM builds, I am running it with the OFFICIAL 20151016 release of Carbon ROM on my Z3 here (excuse me, but some advertisement needs to be placed ). I hope you enjoy it
Regards
Installed it on CM 12.1 first look runs smoothly and quick
V10.2
Hey guys,
V10.2 is currently compiling, you can check the progress here: http://myself5.de:12345/job/M5Kernel All Devices/
It's basically a bug/derpfix build, but also added some new under the hood changes.
Changelog:
Fix Soft Reboots on rhine devices
Add Oneshot Sync
Tweak kgsl
Fix loading of LZMA Compressed Recoverys
Regards
Myself5 said:
V10.2 is currently compiling, you can check the progress here:
Click to expand...
Click to collapse
Playing around with the kernel on CM
Looks like smooth and stable
Want to change CPU govenour with tasker from Wheatley to elementalx when playing special games.
Tasker says he can set on CPU 0 and 1 the govenour, but not on CPU 2 and three. There is no govenour selection on CPU 1 and 2 avaiable in Tasker
I give my the answer myself
Kernel Audiotor have Tasker plugin support..so its much easyer with this and it works
@rcstar6696
Any chance of a new kernel based on Sony 23.4.A.1.200/23.4.A.4.6
http://review.cyanogenmod.org/#/c/128679/
V11 is compiling
Hey folks,
I just started the build of V11. It contains considerably most of the changes done till now, @tomascus did a very good work with that. He merged Linux Kernel upstream up to 3.4.111, which is the newest 3.4 Kernel available. We ofc also merged the CM upstream, and tomascus also merged some improvements to f2fs and zRAM. In addition to that Eyenseo fixed the static noise on highend headphones. In addition to that, I'd like to welcome Eyenseo and tomascus to the team, they will maintain the Z2 (as I sold mine recently) and tomascus, who will maintain the Z1 (we were looking for a Z1 maintainer since quite a while).
Furthermore, we'd like to announce that this might be the last 3.4 M5 Kernel build (unless we find some time to keep it updated for LP). The reason is: M will use the Sony AOSP trees and the 3.10 Kernel. Hence we are going to start working on a 3.10 based M5 Kernel as soon as we can, in order to be ready once M builds are released. (Which should be soon)
You can see the current build progress here: http://myself5.de:12345/job/M5Kernel All Devices/
Changelog Version 11:
Probably the last 3.4 M5 Kernel release, we will start working on M5 Kernel based on the Sony 3.10 AOSP Kernel soon.
Merge CM Upstream (Includes merge of Sony 23.4.A.1.200/23.4.A.4.6)
Fix static noise on high-end headphones
Various zRAM fixes and improvements
Merge of Linux Kernel upstream to get the kernel base to 3.4.111 (latest 3.4 Kernel available)
@tomascus rules.
Myself5 said:
Hey folks,
I just started the build of V11.
Click to expand...
Click to collapse
Just wanted to say: great kernel and thank you for your hard work.
Just got a Z2 and immediately switched to CM12.1 along with your kernel and the smoothness and battery life are great!
Sent from my Xperia Z2 Tablet LTE using Tapatalk
Just a simple question, when deciding which cpu hotplug plugin to choose, do I leave MPdecision always on? It seems like MPdecision alone does not work as a cpu hotplug(4 cores always connected) and other plugins seems to have some kinda dependencies on MPdecision plugin. I would much prefer to use MPdecision alone, but it seems like I have to turn on intelliplug or MSM mpdecision to make hotpluging work.
DDz_1888 said:
Just a simple question, when deciding which cpu hotplug plugin to choose, do I leave MPdecision always on?
Click to expand...
Click to collapse
Only enable one hotplug method...do you enable two or three it is become buggy
Bastlwastl2010 said:
Only enable one hotplug method...do you enable two or three it is become buggy
Click to expand...
Click to collapse
then MPdecision seems to be broken, it never will unplug idling cores. 4 cores are always online.
DDz_1888 said:
then MPdecision seems to be broken, it never will unplug idling cores. 4 cores are always online.
Click to expand...
Click to collapse
Nonessential....
There are different meanings in idle cores while display on, because bring back cores online cost energy.
A good explanation is here, from the author of elementalx:
http://elementalx.org/the-truth-about-kernels-and-battery-life/
V11.1 is coming
Hey folks
After various reports on different devices, we reverted our sound changes for the static noise with headsets. It seemed to cause more issues than it was fixing.
Therefore, our changelog for 11.1 is quite small.
Changelog:
Fix sound again by reverting the previous sound fixes
As always, the build progress can be seen here: http://myself5.de:12345/job/M5Kernel All Devices/
V11.2 is out
Hey Folks,
As some of you know, my Server died recently, including all the data on it. I thankfully meanwhile found a Backup from the 21st of December 2015, but that means that the V11.x builds are gone. Thanks to the community, we got some of the newer builds back, however not all of them (some devices miss V11.1-Permissive for example), which is why I decided to start a new (11.2) build after finish to setup my server. That is now. I also updated the changelog for 11.2, stating it is what it is. A rebuild of 11.1.
Thanks for your patience and lot for the builds you guys had uploaded during the Server downtimes.
Regards,
Hey, thnk you for your work!... But all links are down;( maybee some guys will upload it? Thx
---------- Post added at 05:47 PM ---------- Previous post was at 05:46 PM ----------
Hey, thnk you for your work!... But all links are down;( maybee some guys will upload it? Thx
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel features:
Powered by Ubuntu 14.04.3 x86_64 (sparky VPS @ www.servercore.com.br - thanks @ChristianLetti)
Build with toolchain SaberMod eabi-4.9-09272015 cortex-a53 targeted
Full -O3 & graphite support with device and target flags enhanced, linaro build improvements, etc
Less is more: stockish builds based on android_kernel_motorola_msm8916
Kernel compressed with LZ4-r131, custom tweaked RAMdisk with GZIP (best size/efficiency ratio, faster boot, less CPU usage)
Removed some debug and logging options
ARM enhanced performance and battery patches
Upstream and CAF fixes
Several CPU Governors (blu_active own governor is default)
Slight UV and both CPU and GPU OC available (boots with stock freqs)
Enhanced TCP methods (westwood is default), Network and Wifi tweaks
Several I/O control (FIOPS is default), tweaked filesystems (F2FS, ExFAT, NTFS & CIFS)
blu_plug: Dynamic Hotplug for osprey
msm_thermal simple driver (default 65º C threshold)
Optimized RWSEM, AES and SHA1 routines (with NEON support)
Vibrator Strength tunable (63 % default)
KGSL fixes and reworked GPU driver
KCAL - Advanced color control for Qualcomm MDSS v3 (RGB calibration and post-processing features)
doubletap2wake available (0:disabled, 1:enabled, 2:enabled fullscreen), option to disable with power button
USB Fast Charge (force max PMIC charge level available both in MTP/AC charger mode)
Multimount fstab (you can use data and cache partitions as f2fs or ext4)
USB & SD Card automount
CDROM emulation added to mass_storage (full Drive Droid compatible)
init.d support (busybox run-parts required)
CM12.1 performance profiles compatibility
Compatible with Kernel Adiutor, Universal Kernel Manage and others
DOWNLOAD KERNEL ZIP
I only support stock ROM on XT1541. Stock ROM for XT1540 and XT1542 should work nicely also.
Other than that, you're on your own
On CM based ROMs, I support all models original CM supports.
Warning: If you come from other kernel, you should dirty flash your ROM before flashing blu_spark zip to avoid problems.
Reflash ROM -> flash SuperSU -> Boot device and install busybox -> flash blu_spark.
Also uninstall or clean data of any kernel control app you're using.
The regular kernel zip is for all ROMs that have Wifi builtin (like CM).
The stock zip is for stock ROM on supported models or other ROMs that have wifi built as a module.
Ask your ROM developer to know what to choose from.
Thanks to @franciscofranco, @faux123, @LaboDJ @show-p1984, @flar2, @anarkia1976, @stratosk, @myfluxi, @Christopher83, @hellsgod, @savoca
Special thanks to @DariosF and @ciprianruse88, for the friendship, initial push, knowledge and webart.
XDA:DevDB Information
blu_spark osprey, Kernel for the Moto G 2015
Contributors
eng.stk
Source Code: https://goo.gl/dDXuqH
Kernel Special Features: Powered by sparky
Version Information
Status: Stable
Current Stable Version: r92
Stable Release Date: 2015-11-14
Created 2015-09-21
Last Updated 2015-11-13
Reserved
All right crew!
Some of you may know me from Nexus development in Code_Blue and blu_spark projects, I decided to release a kernel for the Little Moto G3.
So far is in beta stage but quite stable. I manage to do a nice base I think, keep in mind that more stuff will come in the future, be patience
I tested it good on the AOSP ROM by @Alberto97 and Paranoid-L by @scritch007.
CM 12.1 nightlies works nicely.
Other ROMs should work too, I use anykernel zip that uses ROM existing RAMdisk
Stock 5.1.1 ROM compatible also soon
Enjoy the blu_spark!
Great! All kernel have wifi issues due to different drivers. Seem better using CAF wifi drivers. I'll try this soon!
Sent from my MotoG3 using Tapatalk
Goob work thanks!
eng.stk said:
On CM 12.1 of 13-09 by @squid2, I encountered some issues.
Radio derps always on first run, on reboot is cool. But wifi doesn't work.
Now on the officials let's see how it goes, hope you guys can help out so we have some nice goodies for the osprey.
Stock 5.1.1 ROM boots also, most work, except wifi... but who wants stock right? ;p
Click to expand...
Click to collapse
The reason you encountered WiFi issues on the stock ROM and my CM builds is that they use a separate kernel module for WiFi instead of building it into the kernel. You can make two variants of your kernel, one with CONFIG_PRONTO_WLAN=y for ROMs where WiFi is built into the kernel, and one with CONFIG_PRONTO_WLAN=m for ROMs where WiFi is in a separate kernel module.
Also, just so everyone knows, the official CM builds will be using Alberto's stock-ish kernel with WiFi drivers built in. So the existing blu_spark build here will probably work on official CM. Also be aware that the official CM kernel will use stock Motorola WiFi drivers, and will not have any special features like hotplug or better I/O schedulers. Thus, performance and battery life will be a bit poorer with the official CM kernel, and Indian users may encounter WiFi issues. On official CM, flashing a custom kernel such as blu_spark should improve performance and battery life a bit. In the coming days, I will also be making my kernel (that I've been bundling with CM) available as a standalone flashable zip, so that people who were happy with the kernel my unofficial CM builds shipped with would continue to be able to use my kernel.
squid2 said:
The reason you encountered WiFi issues on the stock ROM and my CM builds is that they use a separate kernel module for WiFi instead of building it into the kernel. You can make two variants of your kernel, one with CONFIG_PRONTO_WLAN=y for ROMs where WiFi is built into the kernel, and one with CONFIG_PRONTO_WLAN=m for ROMs where WiFi is in a separate kernel module.
Also, just so everyone knows, the official CM builds will be using Alberto's stock-ish kernel with WiFi drivers built in. So the existing blu_spark build here will probably work on official CM. Also be aware that the official CM kernel will use stock Motorola WiFi drivers, and will not have any special features like hotplug or better I/O schedulers. Thus, performance and battery life will be a bit poorer with the official CM kernel, and Indian users may encounter WiFi issues. On official CM, flashing a custom kernel such as blu_spark should improve performance and battery life a bit. In the coming days, I will also be making my kernel (that I've been bundling with CM) available as a standalone flashable zip, so that people who were happy with the kernel my unofficial CM builds shipped with would continue to be able to use my kernel.
Click to expand...
Click to collapse
"...and Indian users may encounter WiFi issues..."
I didn't got your point here.
Will the Official CM kernel cause the WiFi issue for we Indian users or this blu_spark kernel?
Sent from my SM-A800F using XDA Free mobile app
SArnab©® said:
"...and Indian users may encounter WiFi issues..."
I didn't got your point here.
Will the Official CM kernel cause the WiFi issue for we Indian users or this blu_spark kernel?
Sent from my SM-A800F using XDA Free mobile app
Click to expand...
Click to collapse
Official CM won't work on Indian users without custom kernel
Sent from my MotoG3 using Tapatalk
Finally, a REAL custom kernel!!! Thank you!!
Nice work! im currently running cyanogenmod so i cant test it.
Synapse isn't working...stock x.44 rom on xt1540
Running r25 plus the 22/09 official CM nightly on the 1GB model.
No glaring issues to report, everything works as far as I can tell. Battery life is comparable to stock, but note that most of the time I'm using the "performance" option for CM, whatever that does.
Performance is slightly disappointing, some stutters and lag is present, but that is to be expected, as I had run into these issues (worse, even) on the kernel used on the unofficial builds.
Overall, thanks for your excellent work, and I look forward to using this kernel after using Code_Blue for a very long time on my now-defunct Nexus 5.
If you happen to need testing or feedback, let me know, and I'll try my best to be of use to you.
squid2 said:
The reason you encountered WiFi issues on the stock ROM and my CM builds is that they use a separate kernel module for WiFi instead of building it into the kernel. You can make two variants of your kernel, one with CONFIG_PRONTO_WLAN=y for ROMs where WiFi is built into the kernel, and one with CONFIG_PRONTO_WLAN=m for ROMs where WiFi is in a separate kernel module.
Click to expand...
Click to collapse
Sadly for me, CONFIG_PRONTO_WLAN=m and CONFIG_PRONTO_WLAN=y both the methods didn't flick to get WiFi working on Stock ROM. Last time i had missed doing modules_install for the seperately compiled wlan module. Did that one as well, still WiFi is a no go.
BTW in Motorola kernel source, there are 2 defconfigs namely
Code:
msm8916_defconfig
msm8916-perf_defconfig
and 2 externel configs
Code:
debug-msm8916.config
lux.config
I had attempt building kernel by clubbing them as follows
Code:
[B]CASE 1 :[/B]
msm8916_defconfig + debug-msm8916.config + lux.config
[U]Result:[/U] Kernel works (All features except WiFi), WiFi module stripped be 3.4MB in size
[B]CASE 2:[/B]
msm8916-perf_defconfig + debug-msm8916.config + lux.config
[U]Result:[/U] Kernel works (All features except WiFi), WiFi module stripped be 4MB in size (This is the size same as of Stock's WiFi module).Yet no go with WiFi
Now do i have to club them together while building kernel,
Code:
msm8916-perf_defconfig + msm8916_defconfig + debug-msm8916.config + lux.config
To get Kernel and WiFi module matching each other..?
eng.stk said:
Stock 5.1.1 ROM boots also, most work, except wifi... but who wants stock right? ;p
Click to expand...
Click to collapse
Hi, is your kernel functioning WiFi fine on Stock ROM..? Stock for stability and good backup i'd say
hp420 said:
Synapse isn't working...stock x.44 rom on xt1540
Click to expand...
Click to collapse
Nothing to do with kernel
khartaras said:
Running r25 plus the 22/09 official CM nightly on the 1GB model.
No glaring issues to report, everything works as far as I can tell. Battery life is comparable to stock, but note that most of the time I'm using the "performance" option for CM, whatever that does.
Performance is slightly disappointing, some stutters and lag is present, but that is to be expected, as I had run into these issues (worse, even) on the kernel used on the unofficial builds.
Overall, thanks for your excellent work, and I look forward to using this kernel after using Code_Blue for a very long time on my now-defunct Nexus 5.
If you happen to need testing or feedback, let me know, and I'll try my best to be of use to you.
Click to expand...
Click to collapse
Yeah I'm cooking some stuff, but moto source is crap. I already miss nexus AOSP .
==vj== said:
Sadly for me, CONFIG_PRONTO_WLAN=m and CONFIG_PRONTO_WLAN=y both the methods didn't flick to get WiFi working on Stock ROM. Last time i had missed doing modules_install for the seperately compiled wlan module. Did that one as well, still WiFi is a no go.
BTW in Motorola kernel source, there are 2 defconfigs namely
Code:
msm8916_defconfig
msm8916-perf_defconfig
and 2 externel configs
Code:
debug-msm8916.config
lux.config
I had attempt building kernel by clubbing them as follows
Code:
[B]CASE 1 :[/B]
msm8916_defconfig + debug-msm8916.config + lux.config
[U]Result:[/U] Kernel works (All features except WiFi), WiFi module stripped be 3.4MB in size
[B]CASE 2:[/B]
msm8916-perf_defconfig + debug-msm8916.config + lux.config
[U]Result:[/U] Kernel works (All features except WiFi), WiFi module stripped be 4MB in size (This is the size same as of Stock's WiFi module).Yet no go with WiFi
Now do i have to club them together while building kernel,
Code:
msm8916-perf_defconfig + msm8916_defconfig + debug-msm8916.config + lux.config
To get Kernel and WiFi module matching each other..?
Hi, is your kernel functioning WiFi fine on Stock ROM..? Stock for stability and good backup i'd say
Click to expand...
Click to collapse
Yeah I tried a bit of everything and didn't get it to work either. NOt going to bother :/
eng.stk said:
Stock 5.1.1 ROM boots also, most work, except wifi... but who wants stock right? ;p
Click to expand...
Click to collapse
I do!! If I want anything else I have a nexus for that.
Hotspot doesn't work for me. USB tether does
blu_spark r29
All right crew!
New build is up, enjoy :good:
Latest CAF wifi drivers and other network patches
Build improvements and tracing disabled
Filesystem and storage improvements
Multimount fstab (you can use data and cache partitions as f2fs or ext4)
Removed debug and cruft
Crypto and Neon patches
Scheduler improvements
Lot's of ARM battery and performance fixes
Memory management improvements
CM12.1 performance profiles compatibility
RAMdisk tweaks
Click to expand...
Click to collapse
I was about to review by the time new release is already up.
I'd say this kernel is meeting my requirements and behaves to how I want it to be.
Thanks for not adding CPU boost. And the blue_plug is going good
Battery backup is close to Motorola's stock kernel. And happy to find WiFi turning on-off fine.
Will get on new release and check it out. Thank you for bringing kernel development alive for G3
ROM: CyanogenMod official nightly 24-Sept-2015
The latest release is cool. Smoother and CPU temps are soo cooler. Honestly I always had higher temps on CM12.1 as compared to Motorola's stock kernel. This time its same as stock.
And I tried out INTERACTIVE governor with just 2 changes. The scaling goes awesome with blue_plug
timer_rate: 40000
hispeed_freq: 800000
The CPU load tasks looks accomplished within lower frequencies itself less rampage to higher freqs. And have set CPU min to 400MHz.
Hello.. Anyone can tell me if the latest release work on stock rom?
I'm iffy on whether or not to keep this one yet, since I'm going away for the weekend, but I'll totally test it for today and see how battery life seems. the first build didn't like me underclocking, so I'm hoping this one responds better.
*edit*
i'm seeding for the next few hours for anyone who prefers torrent. Please re-seed!
*edit #2*
stock .44 build, moto xt1540, kernel b29
no wifi, no hotspot...cleared cache and dalvik. no dice
Following the release of r29, updated CM12.1 nightly to 24/09 and flashed the newest release.
Performance is significantly improved over last iteration, on r25 and 22/09 I had massive, massive slowdowns where the phone ground to a halt quite often. I also experienced issues with Spotify closing while playing music (which is a mild annoyance) and frequent re-launching of the, well, launcher. Here, I've not had as much of that, but the phone takes a LONG time to wake up when someone is calling, as in 4-5 seconds just for the screen to show caller ID. Which may or may not be kernel-related, but if you could look into it, that'd be fantastic.
Thanks for the quality release again.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
EXPERIENCE HALOGEN | EXPERIENCE AWESOMENESS
For Changelogs please see POST #2.
For Recommended Settings please SEE HERE.
DISCLAIMER :-
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will simply laugh at you.
*/
NOTE :-This kernel is ONLY meant for AOSP/CM ROMs.
This IS NOT MEANT for STOCK ROMs.
Upto R14 Kernel supports Lollipop.
From R15 onwards Kernel supports ONLY Marshmallow.
From R18 onwards Kernel supports Doze + Marshmallow.
If you don't know what Doze is, google it.
WHAT IS THIS KERNEL ?This kernel is built especially for these 3 things :- 1. Audio, 2. Performance, 3. Battery Life.
I will try to bring in as many features as possible, and at the same time ensure that there are no conflicts / incompatibility issues.
FEATURES :-(features of ONLY the latest version is mentioned)
Based on Linux Kernel 3.4.42
AROMA installer v3.0
Updated with the latest CM13 sources
Built with UBER Toolchain GCC-6.0
Any Kernel script used
Kexc Hardboot patched
Built with -O3 & -graphite flags for enhanced performance
GPU OC to 533 MHz & UC to 100 MHz
Disabled PowerHal log spam (thanks to @attack11)
Implemented LoUIS cache
Audio :-
Faux Sound Control v3.2
Headset in high performance profile
24 bit audio support
Low latency audio playback
Slimbus overclocking for superior audio quality
DOLBY dap dependency fix
Ultrasound & ASoC : qdspv2 tweaks
Battery Saving/ Performance :-
Readahead set to 512
Set sched_mc_power_savings to 2
Enabled CPU boost
NVIDEA Power efficient patches
Optimized slub memory allocator
Optimize Sfck Compression
Sched Tweaks (see GitHub)
Add Frandom
Power effecient work queues enabled by default
Reclaim RAM from loggers, increasing default ram to 886 Mb
Disable gentle_fair_sleepers for increased I/O
Enable advanced unaligned_access
Enable arch_power
Use power efficient workqueues for bam_dmux
Optimize square root algorithm
Many tick, clockevents & timer tweaks (see GitHub)
Lower swappiness
msm:kgsl tweaks(see GitHub)
CPU Governors :-
intelimm, intellidemand, intelliactive, smartmax, conservative, ondemand, userspace, powersave, performance, interactive, impulse, yankactive, zzmoove
CPU Hotplugs :-
Intelliplug, MSM Hotplug, mp-decision, Bricked Hotplug
GPU Governors :-
msm-cpuferq, msm-adreno-tz, userspace, powersave, performance, simple_ondemand, conservative.
I/O Schedulers :-
fiops, vr, zen, sio, bfq, cfq, row, deadline, noop, fifo, tripndroid
TCP Congestions :-
westwood, cubic, reno, hstcp, hybla, vegas, veno, scalable, lp, yeah, illinois, hctp, advanced, highspeed.
Others :-
Ability to use your device as USB Keyboard / Mouse (use this apphttps://play.google.com/store/apps/details?id=remote.hid.keyboard.client&hl=en)
Stereo call record support
Increase torch power by 20mA
psx2usb
KCAL v2 by Savoca
Added Adreno Idler
GPU tweaks (see GitHub)
Dynamic FSync
Intellithermal v2
Added optimized square root algorithm
Added optimized ARM_RWSEM algorithm
Added state notifier driver
Enabled quick wakeup
NOATIME and NODIRATIME as default
NEON kernel mode
Ex-FAT support
SE Linux tweaks
SE Linux set to permissive
Random / Frandom / Prandom tweaks
Entropy tweaks
Mutex & futex tweaks
LONG TERM SUPPORT :-
This kernel will be supported for a long time with updates directly streamed from CM kernel sources i . e . as long as CM keeps publishing updates to Motrola's Kernel, this kernel will also be updated.
Further, I will also be personally adding features to this kernel along with tweaks and optimizations as and when needed.
DOWNLOADS :-(do not mirror my links)[ Latest Version ][ Older Versions ]
TEST BUILDS with OC & UV :-These builds contain the following extra features ( when compared to normal /stable builds ) :-
CPU OC to 1593.6 MHz
CPU UC to 96 MHz
CPU UV hardcoded and can't be changed
Associated RamDisk changes
Since OC will not work without associated ramdisk changes, hence test builds are available as boot images rather than anykernel zips.
Now there had been reports of bootloop with blisspop & rr roms and certain other roms. I looked into this and found out that even though they are based on cm kernel, their ramdisk sizes are different, hence bootloop on using boot.img but no bootloop on using anykernel zip ( since, anykernel works irrespective of ramdisk size).
Now it is highly unfeasible to build a boot.img for every different rom and upload them separately. Hence, I have decided NOT to include OC/UC in the stable builds.
Hence these images will only work on aosp and cm13 roms.[/I] Any rom having ramdisk size different than that of official cm13 or official slim(aosp), will not be supported. Hence no support for OC in rr/bliss.
INSTALLATION INSTRUCTIONS :-
Reboot into recovery.
Make a nandroid BackUp.
Select Install zip from SD Card.
Select the Downloaded zip (different builds are present as an option in AROMA).
Then Reboot to System.
RECOMMENDED APPS FOR KERNEL TWEAKING :-
Kernel Adiutor
Faux123 Kernel Enhancement Pro
I do not support any other apps.
CREDITS:-~~Google
~~Motorola for kernel sources
~~Flashhhh
~~hurtsky
~~Luk & Luca -for various fixes
~~Thecrazyskull, DC07 -for cherry-picks
~~Faux123
~~Savoca
~~YoshiShaPow
~~attack11
~~many more.......
Please don't start a war here if I forgot to mention someone. PM me and I will add him.
XDA:DevDB Information
HalogenKernel, Kernel for the Moto G 2014 LTE
Contributors
zakee94
Source Code: https://github.com/zakee94/halogen_kernel/
Kernel Special Features: Ultra High SOUND, Kexec, KCAL, Intellithermal, MSM Hotplug
Version Information
Status: Alpha
Current Stable Version: R29
Stable Release Date: 2016-07-24
Created 2016-02-02
Last Updated 2016-07-24
Changelog
CHANGELOG(simplified changelog, for full changelog please look at my GitHub commits.)
R29 --> 24/07/2016
Merged CM Updates
For older changelogs :-
R28 --> 08/06/2016
Merged CM Updates
AROMA installer
Added tripndroid IO Scheduler
CPU optimizations
ARM tweaks and updates
R27 --> 12/05/2016
Merged CM Updates
R26 --> 10/04/2016
Merged CM Updates
R25 --> 16/03/2016
Merged CM Updates
R24 --> 18/02/2016
Reverted the following :-
CPU OC/UC - 1593/96 MHz
CPU UV
LMK tweaks + Agressive LMK mode
Following CPU govs --> lionheart, dancedance, bioshock, alucard
Following Hotplugs --> Mako, Auto-smp
Added the following -->
Merged CM Updates
Built with UBER Toolchain GCC-6.0
R23 --> 19/01/2016
Initial Release
Reserved
... flashed this kernel - and works like a charm!
Thanx!
As a POSITIVE side effect after flashing this kernel, my LTE connection stays as stable, as I had it never before:good:
bitstra said:
... flashed this kernel - and works like a charm!
Thanx!
Click to expand...
Click to collapse
Thanks for the positive review !
bitstra said:
As a POSITIVE side effect after flashing this kernel, my LTE connection stays as stable, as I had it never before:good:
Click to expand...
Click to collapse
There are certain commits which improves and stabilizes cellular connectivity.
It works very well!
The overclocking is overvolting the CPU? Or it just changes the frequencies?
LuuchoRocha said:
It works very well!
The overclocking is overvolting the CPU? Or it just changes the frequencies?
Click to expand...
Click to collapse
It's using more voltage. Look here.
Speed and stability are amazing but Camera app can't find the camera anymore. Any advice?
---------- Post added at 02:34 PM ---------- Previous post was at 02:13 PM ----------
Also any suggestions on best TCP settings for speed?
t-pip said:
Speed and stability are amazing but Camera app can't find the camera anymore. Any advice?
---------- Post added at 02:34 PM ---------- Previous post was at 02:13 PM ----------
Also any suggestions on best TCP settings for speed?
Click to expand...
Click to collapse
You shouldn't face any issues with camera, which ROM are you on ??
For TCP try Westwood.
Hello,
Will be possible to make it for CM12, if I install, the camera stops to work, the rest work perfectly.
Thanks,
Sent from my Moto G 2014 LTE using XDA Free mobile app
zakee94 said:
You shouldn't face any issues with camera, which ROM are you on ??
For TCP try Westwood.
Click to expand...
Click to collapse
Thanks for the reply.
I'm running AOSP 5.1.1
todobarato said:
Hello,
Will be possible to make it for CM12, if I install, the camera stops to work, the rest work perfectly.
Thanks,
Sent from my Moto G 2014 LTE using XDA Free mobile app
Click to expand...
Click to collapse
t-pip said:
Thanks for the reply.
I'm running AOSP 5.1.1
Click to expand...
Click to collapse
This kernel is strictly for marshmallow based roms only.
However if you want to use it on lollipop based roms try an older version.
You can download it HERE.
zakee94 said:
This kernel is strictly for marshmallow based roms only.
However if you want to use it on lollipop based roms try an older version.
You can download it HERE.
Click to expand...
Click to collapse
Will give that a go. From what I could see yesterday this version worked fine with Lollypop apart from the camera.
Edit
Seems that kernel won't run the processor any faster than 787.
Is there any chance of updating to include over clock or modding current version to work with Lollypop camera?
t-pip said:
Will give that a go. From what I could see yesterday this version worked fine with Lollypop apart from the camera.
Edit
Seems that kernel won't run the processor any faster than 787.
Is there any chance of updating to include over clock or modding current version to work with Lollypop camera?
Click to expand...
Click to collapse
No.
I'm kinda curious, the title says Moto G, but will this work for Note 1 running CM13?
roimarco said:
I'm kinda curious, the title says Moto G, but will this work for Note 1 running CM13?
Click to expand...
Click to collapse
Are u serious? Of course it won't.
Hello,
The kernel is broken, with last nighty.
In cm13 was updated the Wi-Fi , now if I install the kernel Wi-Fi is inoperative.
Best regards,
Sent from my Moto G 2014 LTE using XDA Free mobile app
Kernel Updated[ DOWNLOAD ]
For details CLICK HERE.
Thanks a lot, Wifi is fixed now. Your kernel is really awesome. A few tweaks and battery life is stellar, such as performance. Thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Dorimanx UNIFIED! (OP3+OP3T) Kernel for STOCK 7.1.1 OOS/H2OS 4.1.6+7+4.5.1 + BETA!
NO > Oxygen 3.x.x or CM/LineAge/OREO BETA SUPPORT!!! GO AWAY NOW!
My PM box, is for Emergency ONLY! do not send me PM's just because you cant post! that is lame, post something useful and post in thread.
My kernel was based on OP3 Stock Kernel 4.5.1 + BETA 15/24 Source.
Kernel Tree is 3.18.84, + OP3 and CAF updates + my tweaks and lots of tuning!
Global Credits!
Flar2 for many kernel mods
Cyanogen/LineAge/Code Aurora for many kernel mods
Andip71
Franciscofranco
SultanXDA
OP3 Devs for Stock kernel base!
To all my sources in GITHUB!
Linus Torvalds for Linux source!
WHAT INSIDE:
Kernel support OOS/H2OS 4.1.x/4.5.x
Kernel compiled with Linaro GCC 7.1.1 Android Bionic 64Bit adapted for OP3
Kernel includes all new security patches.
Kernel updated up to 3.18.84 build.
Kernel includes all original last 7.1.1 changes by OP3 Devs.
Kernel operate in 300HZ + all needed fixes to do that.
Kernel has DASH charge and USB Fast Charge (USB mode up to 900mA with MTP on)
Kernel support charging up to 2500ma with any charger! stock locked to 1500ma
Kernel has swipe to wake features by @FLAR2 (up,down,right,left,and dual tap).
Kernel include Sweep2Sleep allows sweeping from right to left and backwards!
on soft buttons to turn off the screen. by @FLAR2
Kernel has support for screen color change app. (KCAL Interface).
Kernel has support for touch keys light delay, default 6sec. by @andip71
Kernel include KGSL fixes and reworked GPU driver (use 133MHz min freq to save juice, goes to idle @ 100MHz)
Kernel include all latest patches from Code Aurora source for 3.18.y
Kernel include Enhanced TCP methods
Kernel include IPA/TIMERFD/WIFI/NETLINK wakelocks removal code by @franciscofranco
Kernel include open source QUALCOMM Wi-Fi driver updated to max without debugs.
Kernel include advanced binder driver from main line 4.10.y kernel.
Kernel include CDROM emulation on mass_storage (compatible with DriveDroid 0.10.18+)
Kernel include latest F2FS driver for 3.18.y with fixes for speed and stability.
Kernel include ZEN,NOOP,BFQ,DEADLINE,CFQ,FIOPS,SIO I/O govs tuned for SSD.
Kernel includes Elementalx, Blu_active, Interactive, Conservative, Ondemand, Performance CPU GOVS.
Kernel support FSYNC mode for FS. (Off by default)
Kernel includes ARM enhanced performance and battery patches
Kernel support Backlight Dimmer feature.
Kernel supports CPU OverClock/UnderClock for both clusters.
Kernel support thermal driver tuning, max heat for cores.
Kernel includes advanced crypto drivers and latest qseecom decryption driver.
Kernel includes updated EXFAT and FUSE + NTFS drivers.
Kernel support for not forcing encryption and verity checks.
Kernel includes support for CIFS driver.
Kernel includes fast finger print sensor mod when screen is off.
Kernel includes support for Haptic Feedback (vibrate) tuning (more/less)
Kernel includes massive code update for sound driver, and @FLAR2 sound/mic gain control interface.
Kernel include boost to I/O by mounting partitions with optimized flags, and updated MMC driver.
Kernel includes updated BT and NET/PPP/VPN/DATA drivers.
Kernel include mode to ignore home and touch keys when finger is pressed against the screen.
Kernel includes Aroma Installer for easy install with few simple changes that can be selected.
Kernel includes many patches to camera, GPU, and screen drivers.
Kernel has OTG enabled by default internally.
Kernel has Notification LED Control driver by @andip71
Kernel include usage of power efficient workqueues in many drivers by @franciscofranco
Added Support For INIT.D Scripts see /data/init.d folder
Kernel will switch to NOOP I/O Sched during screen Off time to save power. by @SultanXDA
Kernel will boost CPU frequency when screen wakeup to improve user experience, by @SultanXDA
Kernel will set max allowed apps in RAM to 60 from 32
Kernel will add advanced busybox binary in /sbin/busybox for advanced users and my scripts
Known BUGS!
Post reports, i will fix.
Standard disclaimer:
By installing this kernel YOU will take full responsibility for any damage to your device!
Hardware or software! no one forcing you to install it.
So please do not blame me if you read wrong! or didn't read at all the instructions that i have written for YOU.
But you can feel SAFE to use it, as I test every release on my phone!
Before I publish it for download.
Your warranty will be void by installing custom kernel as my.
Kernel Sources:
KERNEL GITHUB
TO DOWNLOAD GO DOWN!!! YES MORE DOWN...(do i need to repeat?)
How To Install:
You will need to have device with Latest Recovery installed! Please install the 3.1.1.x BUILD!
>>>Here is the Recovery you need!<<<
Recovery is Unified with OP3 + OP3T no problem to install.
Old recovery can corrupt your DATA partition as my kernel using latest F2FS driver. new recovery has updated driver.
YOU MUST UNLOCK OEM BOOTLOADER!!! OR YOU WILL BE STUCK ON BOOT!
Refer to other threads for recovery install process and for oem bootloader unlock.
Download kernel, upload it to your SDCARD, anywhere.
Always have STOCK Kernel for your ROM!
Reboot to Recovery.
THINK AGAIN! did you made backup? NO!!!!??? DO IT NOW!
If you had any other Custom kernel, Install STOCK kernel or dirty flash your ROM,
to clean any trace from other kernel. then install ROOT/Magisk if you wish! then install my kernel ALWAYS THE LAST.
Do not clean any cache or dalvik (needed for ROM only!).
Reboot!
If you wish to UNINSTALL my kernel, there is a uninstaller ZIP for you.
it's will remove all ramdisk changes, and install last 4.1.6 stock kernel, preserving ROOT if was installed!
Have Fun and report.
Honored Fearless BETA Testers! without them i would be lost in dark kernel space:
dimberr
Diechel
misterepicwin
vampire36
RyperX
siggey
bipinbedi
Chris7
Leicxan
Radon94
Donation Board:
ME donated 150+ hours to update stock to now.
Dimberr HUGE Donation!
Betadr X2
Diechel
RyperX
Misterepicwin
Cultofluna
Andrej666
Aagato86
Thread Rules:
This is a Kernel development thread ONLY.
Allowed:
1) Any kernel reports with LOGS in case of crash from /sys/fs/pstore/console file.
2)Any satisfaction reports with picks and suggestions about kernel.
3)Any questions related KERNEL.
4)Any important information that may improve this kernel.
5)Any issues you have with STOCK Stable ROM. this what i use and test, all the rest are BONUS.
6)Sound mods and root access. i think it's good information that can improve user experience with my kernel.
Not Allowed:
1) extreme off topic about some ROM mods, APPS, Magisk non ROOT modules,
2)Comparing kernels, other vs other, my vs other.
3)Trolling!, Spamming, hate toward other users, flaming, feeding trolls. posting not in English, NOOB calling other users.
4)Disrespect of any beta tester listed in OP.
All recognized developers Allowed to manage there own threads without bothering forum administrators.
I can, and I will, remove all not allowed posts without blinking.
Mirror #1 by willflint
Mirror #2 by GITHUB!
Info for Web Hackers,
in my mirrors, there is nothing to take!
My work is public and for the people!
Please let my mirrors work in peace.
Thanks.
Please consider supporting my work by tipping
BTC
19FMaiTe5kbNJZwhtYjaAc8p8Q9oZhCjB1
Dash
XkNoDjdq84rq7JunR5q8b3hubx9FTsvY25
Litecoin
Lb6LxPTJ1BxWg78zsNEnAgv5JdC4JgzLPL
Ether
0x2BABf64cb03656f645516A4cA666719b1af4Ac4F
Dogecoin
DAtytL65sy9vuvYh1T7vuKaaaJoKaNHubh
Monero
44vY3x5nBqCRfZdVwLtAgjbzUfnnEevd54yyCzsM4HzFfZEXH36e1WYD9RKRKUmT5SW46Ytkp1bnVZqhySeQFh99C4iivgB
Aeon
Wmt8gnhjtQeefUfmVkUj6EHD14XK9crU2dej2EPsGn3JSrLMcSkDytnJDBTeg3muD3Z3Hsc9CSNxFKpRFcpKW7k92urmTd1yB
There is Kernel OTA APP that will auto download and install kernel via TWRP!
>>>>>>Kernel OTA APP<<<<<<
Mirror #2
Change logs:
28/11/17
Kernel 3.2 Stable
*Merged patches 3.18.80+81+82+83+84!
Including: ARM64,BLOCK,I2C,FS,LIB,SECURITY,SOUND,TTY,USB,
*Merged latest F2FS driver updates from source.
*Merged many updates to BINDER code for CAF source.
*Merged mods to touch screen driver by sultanxda, great work for optimization and power save.
*Merged new updates from CM14 including: MDSS,VIDC,
DIAG,CRYPTO,NET,ADSPRPC,SCSI,SOUND,POWER,IPA,MMC,LOCKING core.
*Merged latest WIFI driver updates. ver 06300
08/11/17
Kernel 3.1 Stable
*Merged main stream patches 3.18.74 to 3.18.79
Including: BLOCK,CRYPTO,MMC,NET,TTY,USB,FS,BASE,SECURITY,HID,IOMMU,SOUND,KERNEL CORE,I2C,LIB,SCSI.
Tons of changes! it's 400 commits compressed to patches.
*Merged optimizations to BINDER code from CAF.
*Merged Camera,MMC,KGSL,SOUND,IPA,MDSS,DIAG,QCOM,USB,FS updates from CAF.
*Merged latest Qualcom WIFI driver v06100
06/10/17
Kernel 3.0 Stable
*Reverted changes to SDCARDFS to get rid of bug with folders in storage.
Beta team reporting that all good now.
*Merged patches 3.18.72+73 including:
BLOCK,NET,PCI,SCSI,TRACE,ARM64,FS,SECURITY fixes.
*Merged BINDER updates from CAF and Mainline kernel.
*Merged wakelocks shut when drivers shift operations, by franciscofranco
26/09/17
Kernel 2.9 Stable
*Merged AOSP and CAF updates including:
FS,BlueTooth,Trace,DIAG,Thermal,ASOC,CAMERA,MDSS,
QSEECOM,KGSL,IPA,SOUND,ARM64,TIME,BINDER,NET,
QCOM,SDHCI,USB.
*Merged patch 3.18.71 including:
SCSI,USB,FS,Kernel Core,MM.
*Merged OP3 Dev BETA OBT24+OBT15 color updates.
*Merged latest WIFI driver updates.
*Merged massive update to F2FS from 4.14.y kernel
*Merged latest updates to SDCARDFS from CAF and AOSP.
*Merged latest OEM OP3 4.5.0 kernel updates.
09/09/17
Kernel 2.8 Stable
*Merged OP3/T BETA branch OBT23+OBT14
It's updates to colors switch Srgb and nightmode.
*Merged main line update 3.18.68+69+70!
Many changes to: FS,Kernel Core,NET,BT,SOUND,ARM64,SCSI,LIB,MM
*Merged updates to BINDER CORE from Aosp and main line source.
*Merged updates to F2FS driver.
28/08/17
Kernel 2.7 Stable
*Added busybox mount function to help with working with /system folder.
*Merged latest patches from CAF and AOSP including:
CPUFREQ,DIAG,LOCKS,USB,CAMERA,SOC,NET,KGSL,SOUND,I PA,WIFI updates.
*Merged 3.18.67 patch including: NET,SCHED,Kernel CORE,MM,SOUND updates.
*Fixed selinux not enforced if Magisk installed on EXT4 Data partition!
23/08/17
Kernel 2.6 Stable
*Merged patches 3.18.64 to 3.18.66
Including many many updates to all core drivers and functions.
See GIT if you like to dig in too code changes.
*Merged many updates from CAF and AOSP branches for our device.
*Merged latest OEM OP3/T 4.1.7 update to kernel. (will work just fine with 4.1.6 and BETA too)
*Added new STOCK 4.1.7 kernel to mirror, and new uninstall zip including 4.1.7 stock kernel.
to install this build on 4.1.7 ROM! make sure you had 4.1.7 stock kernel to get all ramdisk updates by OP3!
06/08/17
Kernel 2.5 Stable
*Merged CAF updates including:
ISP,CAMERA,MDSS,IPA,MMC,USB,KGSL,ION,NET,SOUND,PERF,INPUT,REGULATORS
*Fixed ROM dev ram access to used RAM by apps, no longer show 0B
*Merged updates to F2FS driver from Android dev list.
*Merged OP3 Devs BETA 12 update that focused on color update for night mode.
*Updated Busybox from source.
31/07/17
Kernel 2.4 Stable
*Merged fix for low CPU frequency after deep sleep for short delay.
*Merged Patch 3.18.62 including: CRYPTO,TTY,FS,KERNEL CORE,MM,NET updates/fixes.
*Merged update for F2FS driver from source.
*Merged update to BINDER driver from CAF big improvement in code structure and functions.
Binder is directly responsible in running apps and services, memory allocator.
*Merged patch for android-verity mount check.
*Merged new code that will shrink and compact RAM each time screen goes off after 3sec.
And only once in 15min! This will help to have always fresh and fast device. For very long time of use 150hours+
*Merged fix for QCOM driver to prevent possible memory leak.
*Merged patch 3.18.63 including: POWER DOMAIN,OF,SPMI,PCI,USB,FS,KERNEL CORE,NET, BT+NFC,SOUND.
*Merged new update to WIFI driver LA.UM.5.5.r1-05400-8x96.0 open source perfect module!
*Merged massive fix by Awesome DEV @SultanXDA for debug fs code.
*Compiled new Linaro GCC 7.1.1 = new libs and Android Bionic Core, first time such thing was possible!
And compiled Kernel with this massive native android toolchain!
Noticeable speed and global stability feeling!
My BETA team is impressed! 3 days no words in our discord channel hehehe
*Updated Busybox 1.28.0 from source using GCC Linaro 7.1.1
Now it's possible to use OTA Kernel Update App by @Diechel
It's will auto download kernel, install it via TWRP, and show you the change log
Really cool thing! it's donation app. 1$ feel free to donate, or use the website as before
>>> https://play.google.com/store/apps/details?id=com.diechel.xda.dorimanxota3t.pro <<<
16/07/17
Kernel 2.3 Stable
*Merged latest update to F2FS driver from source. sync with 4.13.y tree.
*Merged fix for min sched windows when kernel using 300HZ.
*Merged CAF patch to fix bugs and security issues in:
CAMERA,MDSS,USB,ADSP,CHARGER,IPA,QCOM,NFC,QCDEV,SOUND
*Merged latest WIFI opensource update LA.UM.5.5.r1-05300-8x96.0
*Merged mods to WIFI driver to reduce battery usage.
*Merged mainline patch 3.18.61 including:
NET,USB,IPC,TRACE,SECURITY
*Merged mod to boost CPU freqs after suspend on wakeup.
*Added SeLinux mode changer in Aroma Installer.
You can set Enforce or Permissive. no apps/magisk modules needed!
*Updated Uninstaller to include selinux mods cleanup.
*Added mount command to be linked to busybox, so apps can remount system and root.
If they are allowed to use ROOT.
09/07/17
Kernel 2.2 Stable
*Merged kernel updates 3.18.59 + 3.18.60
Including USB,FS,Kernel Core,LIB,NET,IOMMU,MM
*Set to deny access from perfd ROM service that can brake CPU gov tuning.
*Tuned Interactive GOV on boot for both cluster,
To deliver great Performance and balanced battery save.
*Tuned Blue_Active Gov default tuning.
*Fixed init.d support from /data/init.d/
*Updated busybox to 1.28.0 made with Linaro gcc 7.1.1 64Bit
*Merged many updates from CAF source for our soc.
Including MDSS,CAMERA,IPA,VIDC,INPUT,QCOM,USB,DIAG,SCHED
*Updated WIFI driver to latest opensource LA.UM.5.5.r1-05100-8x96.0
*Fixed my boot script load on boot to allow better tuning of kernel.
*Fixed not working touch when screen is in half wake state. (liftup, wave gesture)
*Added new driver to allow to limit max freq on both clusters so no other app
or ROM service can set higher. for now not used! and not forced.
I will add controls for it in my app.
*Merged updates to F2FS driver from main source.
*Updated new GCC Linaro 7.1.1 kernel builder 64Bit and made kernel with it.
*Added new controls for CHARGING LIMIT in Aroma installer.
You can set max allowed charge back to 1500ma if you wish!
28/06/17
Kernel 2.1 Stable
*Merged 3.18.58 patch including RAM,USB,NET,FS updates.
*Added overclocking for OP3 Model, one step higher for both clusters, not used by default!
25/06/17
Kernel 2.0 MEGA BOMB Build
Kernel will work with BETA STOCK ROMS!
Including All the in WHAT INSIDE LIST
Tested for long time by fearless beta testers!
And crowned as STABLE.
=============================
XDA:DevDB Information
[KERNEL] Dorimanx V3.2 OP3/T Nougat 7.1.1 STOCK 4.5.1 Tree 3.18.84 [28 NOV] PWR CORE, Kernel for the OnePlus 3
Contributors
dorimanx, dimberr, Diechel, misterepicwin, vampire36, RyperX, siggey, bipinbedi, Chris7, Leicxan, Radon94
Source Code: https://github.com/dorimanx/DORIMANX-OP3T-KERNEL/commits/master_7.x.x
Kernel Special Features: See What Inside list.
Version Information
Status: Stable
Current Stable Version: 3.2
Stable Release Date: 2017-11-28
Created 2017-06-26
Last Updated 2017-11-28
One for me
And one more for me
Happy to see you here
Sent from my OnePlus 3T using XDA Labs
Master dorimanx is here
Hmm definitely interesting stuff right here and finally its unified! It was only for 3T AFAIK since it was posted at 3T thread only
Sorry but there is no cpu overclock, the gpu min isn't 100mhz
FinallY!!!
@dorimanx Dori....welcome here on the OP3. Great going.
The subject title is mentioning the OP3 but the github folder says OP3T...can I request you to correct and modify please ...thanks mate
Sent from my ONEPLUS A3003 using XDA-Developers Legacy app
halleyrokz said:
Sorry but there is no cpu overclock, the gpu min isn't 100mhz
Click to expand...
Click to collapse
no oc but gpu min is 100mhz
SREEPRAJAY said:
@dorimanx Dori....welcome here on the OP3. Great going.
The subject title is mentioning the OP3 but the github folder says OP3T...can I request you to correct and modify please ...thanks mate
Click to expand...
Click to collapse
Well the kernel is unified, its same for both models.
To change github and web page to publish the same thing
Why?
plhip47 said:
no oc but gpu min is 100mhz
Click to expand...
Click to collapse
Overclock was not tested on OP3 so for now its stock freqs.
Reminder, i have the op3t
I will find beta tester to help me test this.
dorimanx said:
Well the kernel is unified, its same for both models.
To change github and web page to publish the same thing
Why?
Click to expand...
Click to collapse
Of course you are the boss...but the word "unified" will make things even more clear...cause you never know if there is a question coming sooner or later...[emoji14]
Sent from my ONEPLUS A3003 using XDA-Developers Legacy app
Wow lord Dorimanx!!! Welcome for some OP3 / 3T love !!! Nice to see you here
OB18 op3, buttery smooth. [emoji109]
Sent from my ONEPLUS A3003 using Tapatalk
Just installed it, on latest FreedomOS Stable, and it's smooth af !
Thanks Dorimanx ^^
dorimanx said:
Well the kernel is unified, its same for both models.
To change github and web page to publish the same thing
Why?
Click to expand...
Click to collapse
+1 One and only Dori
Sent from my LG-H815 using Tapatalk
goran_oh said:
+1 One and only Dori
Sent from my LG-H815 using Tapatalk
Click to expand...
Click to collapse
I have added the UNIFIED on main page... i hope it's will not confuse people, if OK or not to install.
the MM kernel is a mess, but N kernel is much more solid and merged for both models.
Also i have added thread rules, that not really different from XDA global rules, Please ALL... respect the rules.
other wise... there will be some overtime cleaning for me to do :silly:
And we have here well known, and respected forum moderator using OP3
First full(98%) charge. Wow
Sent from my ONEPLUS A3003 using Tapatalk
Imotep95 said:
First full(98%) charge. Wow
View attachment 4194781
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
looking good, expected screen on time is 6 hours with normal moderate usage. (no heavy games that use full power)
My record is 7 hours and 20min. no games. just usual things like : calls, xda labs, whatsup, discord, instagram, face, music(screen off), and other apps.
still every user can get different results. all depend on usage and control of apps that drain power without you want that.