Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
This is an unofficial CyanogenMod 12.1 ROM for the LG G Pad 7.0 (WiFi) with a very shiny CAF-based kernel.
All of the basics should be working (video playback, WiFi, etc.).
Installation instructions:
Download ROM and save to sdcard
Boot into TWRP
Perform a full backup
Factory reset, wipe cache and system
Flash ROM, Flash GAPPS (Optional)
Reboot
Enjoy! (Optional)
Source code:
Kernel (cm-12.1 branch): https://github.com/sultanxda/android_kernel_lge_v400
Local manifest (contains the rest of the sources): https://github.com/sultanxda/android/blob/master/v400/cm-12.1/local_manifest.xml
Credits (in no particular order):
The CyanogenMod team
CyanogenMod contributors
CAF
bangprovn
invisiblek
timmytim
If I forgot you, slap me and force me to use an iPhone 4 running iOS 8
Downloads:
ROM: https://www.androidfilehost.com/?w=files&flid=29692&sort_by=date&sort_dir=DESC
XDA:DevDB Information
CAF CyanogenMod 12 for V400, ROM for the LG G Pad 10.1
Contributors
Sultanxda
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: No Longer Updated
Created 2015-04-05
Last Updated 2018-01-20
Changelog:
October 13, 2015:
ROM:
*Switched to stable CyanogenMod branch
*Latest upstream (stable/cm-12.1-YOG7D) CyanogenMod changes
*Removed built-in superuser (use SuperSU instead)
*Disabled strict mode (fixes the flashing red borders that occur randomly, especially in Chrome)
*SELinux is now enforcing
*Changed I/O scheduler to Deadline
*Switched back to old WiFi firmware and configuration
Kernel:
*Updated CPU input boost driver (better performance now)
*Enabled CPU boosting on thread migration (gives much better performance)
*Switched back to old WiFi drivers
*Improved eMMC performance
*Added patches for SELinux
July 23, 2015:
ROM:
*Latest upstream CyanogenMod changes
*ROM is now compressed with LZMA (ROM zip is 50MB smaller as a result, and takes much less time to upload/download)
Kernel:
*Synced with CAF LA.BF.1.1.1_rb1.26
*Updated prima WiFi drivers from CAF LA.BF.1.1.1_rb1.26
*Enabled dynamic FPS feature for the display (this will reduce the power consumed by the display in some usecases)
July 6, 2015:
ROM:
*Latest upstream CyanogenMod changes
*Synced audio HAL with CAF LA.BF.1.1.1_rb1.25
*Synced display HAL with CAF LA.BF.1.1.1_rb1.25
*Updated WCNSS WiFi configuration from V40020a update
*Updated WCNSS WiFi firmware from V40020a update
*Updated venus video firmware from V40020a update
*Reduced time needed to optimize apps at boot
Kernel:
*Synced with CAF LA.BF.1.1.1_rb1.25
*Updated prima WiFi drivers from CAF LA.BF.1.1.1_rb1.25
*Vibrator is disabled while recording videos (so the noise can't enter videos)
*Misc. fixes
June 14, 2015:
ROM:
*Latest upstream CyanogenMod changes
*Synced audio HAL with CAF LA.BF.1.1.1_rb1.24
*Synced display HAL with CAF LA.BF.1.1.1_rb1.24
*Synced media HAL with CAF LA.BF.1.1.1_rb1.24
Kernel:
*Synced with CAF LA.BF.1.1.1_rb1.24
May 24, 2015:
ROM:
*Latest upstream CyanogenMod changes
*Synced display and media HALs with CAF LA.BF.1.1.1_rb1.22
*Two CPUs are always kept online instead of one (better performance and unnoticeable change to battery life)
*Switched to vanilla CAF LA.BF.1.1.1_rb1.22 audio HAL (better audio quality)
Kernel:
*Synced with CAF LA.BF.1.1.1_rb1.22
*Updated core logic of the CPU input boost driver again (less aggressive and smarter now)
*Added some updates to the Interactive CPU governor
May 9, 2015:
ROM:
*Latest upstream CyanogenMod changes
*Updated Adreno graphics libraries
*Updated display and media HALs from CAF
Kernel:
*Synced with CAF LA.BF.1.1.1_rb1.21
*Updated core logic of the CPU input boost driver
*Fixed high CPU load caused by uninterruptible threads (myfluxi)
April 22, 2015:
ROM:
*Latest upstream CyanogenMod changes
*Android 5.1.1
*Increased speaker volume
*Updated display HAL to CAF LA.BF.1.1.2_rb1.18
*Added proper color-calibration interface for LiveDisplay (invisiblek)
*Disabled active fstrim (invisiblek)
Kernel:
*Synced with CAF LA.BF.1.1.2_rb1.18
*Added CPU input boost driver I wrote myself (makes the device feel smoooooth)
*Removed zRAM
*Disabled DSI burst mode (caused graphical glitches and made the display feel laggy)
*Limited vibrator to max of 1865mV (previous max of 3100mV was insane)
April 16, 2015:
ROM:
*CyanogenMod 12.1
*Android 5.1
*Updated Adreno graphics libraries from the official 20A Lollipop update
Kernel:
*Rebased kernel to CAF LA.BF.1.1.2_rb1.17
*Added back magnetic-cover support
*Added back dt2w support
April 5, 2015:
ROM:
*Initial release
Kernel:
*Initial release of kernel based on CAF LA.BF.1.1.1_rb1.17
Reserved
Like I said in the OP, some kernel features may be missing (as I removed a bunch of stuff that my dad will never use). I'm not sure if you guys had F2FS before, but this build does not have F2FS. Have fun.
Thanks for you work @Sultanxda , this build is much smoother than bangprovn's, nearly everything works, camera works, wifi is stable, performance is better
Awesome , downloading .... It's still not the CM12.1, right? Would not be stable yet? Why on my S4 also is not with CM 12.1...
thank Sultanxda : D: D: D
Does it have support for the magnetic smart case?
Thanks btw
Smoth Rom, but tap to wake seems to not work
---------- Post added 6th April 2015 at 12:04 AM ---------- Previous post was 5th April 2015 at 11:59 PM ----------
izzet3838 said:
Does it have support for the magnetic smart case?
Thanks btw
Click to expand...
Click to collapse
Mine doesn't work.
Touch unlock does not work.
Netflix does not run.
Kernel max, mini does not change.
My first try to modify my tablet was today with this ROM.
After a little time playing with it, I noticed that the screen brightness does not change, so it is a little tiring for the eyes.
I hope these little things to be fixed in the future.
But thanks for the effort to get the CM on our little tablets!
one question
Sorry for question) But tell whether another update cm 12.1 for our violent tablet?
There is another kernel for this rom.
evripidis said:
My first try to modify my tablet was today with this ROM.
After a little time playing with it, I noticed that the screen brightness does not change, so it is a little tiring for the eyes.
I hope these little things to be fixed in the future.
But thanks for the effort to get the CM on our little tablets!
Click to expand...
Click to collapse
Screen brightness can change. I just checked it and it works.
gusmao100 said:
There is another kernel for this rom.
Click to expand...
Click to collapse
No... Using a different kernel anyway wouldn't make sense, as you'd lose all the benefits of the CAF kernel.
I was preparing to install this rom more just received the official update to Android 5.0.2. I will test for a few days and evaluate whether it is the best option.
Sultanxda said:
Screen brightness can change. I just checked it and it works.
Click to expand...
Click to collapse
Mine doesn't work...
What can I do?
I have checked this many times...
The brightness change through Bs player but inside the OS.
Update
After a clean install the problem solved
installed the official update to Android 5.0.2, but now as rootear ???
gusmao100 said:
installed the official update to Android 5.0.2, but now as rootear ???
Click to expand...
Click to collapse
Activate Developer options (opções de desenvolvedor) , settings (configurações), Developer options, root access (acesso root), select only apps or apps and adb.
braulio_holtz said:
Activate Developer options (opções de desenvolvedor) , settings (configurações), Developer options, root access (acesso root), select only apps or apps and adb.
Click to expand...
Click to collapse
I'm talking about the official update today towelroot does not work !!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
gusmao100 said:
I'm talking about the official update today towelroot does not work !!!
Click to expand...
Click to collapse
Here is better http://forum.xda-developers.com/g-pad-10/general/dev-thread-lg-g-pad-7-0-8-0-10-1-t2838995
Related
LineageOS 14.1 (CyanogenMod formerly) is a free, community built distribution of Android 7.1.2 (Nougat) which greatly extends the capabilities of your phone.
This is the unofficial Build of LineageOS 14.1 for Jiayu S3 (advanced and basic, not S3 plus), with MT6752 SoC.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* Your warranty is now void.
*
* We aren't responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
What's not working:
You tell me.
Sources:
https://github.com/Shokerface/android_vendor_jiayu_s3_h560
https://github.com/sandstranger/android_device_jiayu_s3_h560/tree/cm-14.1
https://github.com/Shokerface/android_kernel_jiayu_s3_h560
https://github.com/sandstranger/kernel_3.10.102
https://github.com/Shokerface/android_local_manifest
Based on The M.A.D Team device tree.
Developer:
sandstranger
Download:
Check downloads tab
Thanks to:
Verevka
The. M.A.D. Team
Zormax
Moyster
danielHk
DeckerSu
JonnyXda
lescal
XDA:DevDB Information
[ROM] [7.1.2] Unofficial LineageOS 14.1 - Jiayu S3 , ROM for the JiaYu S3
Contributors
Borizzz
Source Code: https://github.com/Shokerface/android_vendor_jiayu_s3_h560/tree/cm-14.1
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP for N from The M.A.D. Team
Based On: LineageOS 14.1
Version Information
Status: Testing
Current Stable Version: Stable28
Stable Release Date: 2018-06-28
Created 2018-03-02
Last Updated 2018-07-05
Changelog
Stable28 28.06.2018:
Synced last LineageOS 14.1 sources (you can check changelog on theirs site);
Added support of fsync calls in mediacodec-seccomp.policy
Android Security Patch Level: 06th of June, 2018;
Stable27 06.06.2018:
Synced last LineageOS 14.1 sources (you can check changelog on theirs site);
Android Security Patch Level: 05 of May, 2018;
Kernel:
Kernel built with gcc8;
Removed exfat driver, cause sdfat supports exfat;
Updated f2fs & sdcardfs;
Various MTK security patches.
Stable26 29.04.2018:
Kernel:
fscrypt with 4.15 Linux kernel;
sdcardfs updated - included last commits;
New filesystem SDFat included;
Kernel built with Gcc 7.3.1;
Many other fixes.
Firmware:
Synced last LineageOS 14.1 sources (you can check changelog on theirs site);
Included new hybrid modem taken from madOS from April, 2018 (thanks to The M.A.D. Team);
Android Security Patch Level: April, 2018
Firmware history before deleting all ROMs by its author era:
Stable25 11.02.2018:
Some commits causing reboots rolled out;
Added some debug info into /proc/last_kmsg;
Some caller improvements;
Root added.
Stable24 03.02.2018:
Added r00t.
Stable23 03.02.2018:
Synced last LineageOS 14.1 sources;
Revert NFC drivers to N;
Various OpenGL fixes for MTK (even OpenGL messed up like s**t);
Fixes for mtp for MTK;
Fixed missing batterservice api error;
Fixed mediaplayer errors;
Fixed nullpointerexception errors;
Various fixes for MTK telephony;
New BT driver v.2.0 for MTK - thanks for danielhk;
Various BT fixes;
Fixed codecs for instagram and other apps;
VM settings for preventing apps fc;
Included missed WIFI_DRIVER_STATE_CTRL_PARAM flag;
Some other fixes.
Stable22 20.01.2018:
Synced last LineageOS 14.1 sources;
Fixed codecs;
Selinux in permissive mode;
Userdebug build, only LineageOS root should work well;
Turning off hardware buttons backlight by timer should work now;
Many other fixes.
Stable21 *Special New Year Build* 29.12.2017:
Updated mtk_agpsd blob till N, this need for fixing ril crash, when mtk_agpsd is present in system;
Some other small stuff.
Stable20 v2 28.12.2017:
Synced last LineageOS 14.1 sources;
RAMdisk cleaned from trash;
Updated GSM blobs;
Fixed crash on modem restart - updated blobs;
Logging in Kernel turned off due to reboots;
Tons of other fixes like in Resurrection Remix and some other.
Stable19 29.11.2017:
Fixed reboot when changing audio.
Stable18 28.11.2017:
Fixed reboots after call;
Fixed cpu temperature indicator.
Stable17 *REUPLOAD2* 25.11.2017:
FM Radio fixed;
Handset fixed.
Stable17 *REUPLOAD* 25.11.2017:
All ril blobs replaced by S3 ones;
Removed unnecessary fuelgauged blob. Maybe this can help fix reboots during call.
Stable17 25.11.2017:
Synced last LineageOS 14.1 sources;
Fixed reboots;
Wi-Fi state control & Wi-Fi suspend support;
Upstream linux kernel to 3.10.108 (oreo branch);
Android Security Patch Level: November 2017;
Sensor calibrating moved back to engineering mode;
No more Netd patching under MTK;
Wi-Fi AP now works on wlan interface;
Now phone turn on from sleep 4 times faster;
Added xen0ns stuff, which recalibrate proximity sensor upon each phone boot;
Security patches in Kernel;
Updated Ion driver;
PersistentDataBlockService service errors on boot, thanks to Moyster;
Fixed too loud call volume while talking;
Build.prop cleaned;
Ambient display for MTK refactored, thanks to Moyster;
Vendor stuff moved into vendor folder;
Updated clang 5.0 compiler;
Fastcharge 1300mAh;
BT Blueborn & WiFi WPA2 KRAK vulnerabilities are fixed;
upstream f2fs drivers;
Tons of other fixes.
Stable16 27.09.2017:
Camera blobs are taken from Xtreme ROM;
Fixed autofocus camera problem;
You can now set photos size upto 16.3Mpix;
Fixed total app memory bug
Zram ported from 4.1 Kernel;
Some other stuff.
Stable15 16.09.2017:
Synced last LineageOS14.1 sources;
Android security patch Level: 05.09.2017
NFC drivers from Zormax removed, The M.A.D Team used instead;
GPU o/c is back again for improving game fps;
Power hal from Moyster;
Power stat from our phone;
Removed debug spam like AEE, master dump etc from Kernel;
Some other stuff.
Stable14 09.09.2017:
Synced last LineageOS14.1 sources;
MP3 now uses hw audio codecs;
Again included optimization flags;
Dexpreopt removed, instead custom art.so with speed odex used;
Upstream clang from 3.8 to 5.0;
Max charge current now is 1,2Ah;
Removed ril blobs, which caused fc on start;
Working NFC;
Removed some Zormax stuff;
Added gamepad support.
Stable13 02.09.2017:
Removed all optimization flags;
Dexpreopt is back again;
Removed some stuff from libart.so which caused apps fc;
Kernel built with gcc 4.9.4 instead of 7.1;
HW audiocodecs included.
Stable12 24.08.2017:
Synced last LineageOS14.1 sources;
Fully working base video hw enc/dec from Android N;
Clearmotion now should work;
FMRadio blobs updated to Android7;
GPS blobs updated to Android7;
Merged July MTK security patches in Kernel;
Driver of CPU hotplug;
Updated sources of CPU governor "interactive";
Other fixes.
Stable11 19.08.2017:
YouTube now uses hw codecs;
No more camera fc on video recording;
System gallery now plays video;
Tons of ffmpeg codecs uncluded;
ROM build with O3 optimization flag;
Camera now records video using only HW codecs;
Sdcardfs is enabled by default.
Stable10 14.08.2017:
Android security patch level: 05.08.2017;
Synced last LineageOS14.1 sources;
Codecs updated to Android 7;
NFC drivers updated;
Sources from Zormax patched;
Updated drivers ged, mtk_smi, gpu_hal , mtkjpg, m4u, mmp in Kernel;
Added overclock option of CPU and GPU with ability to set frequency of CPU;
CPU works with workqueue;
Added new CPU governors: renice , elementalx;
New memory governors: zen and others;
Small fixes in Kernel;
Updated audio drivers to Android 7, they are taken from Sony;
Updated BT drivers to Android 7;
Almost all vendor now from Android 7;
Updated JPG drivers to Android 7, small improvements in photo quality;
Completely working PCM32;
Completely working 48kHz sound;
BT sound now works with 48kHz;
Screen options: now you can prevent accidental sensor turn ons;
ROM build with additional optimization flags;
Added ability to set sound level in engineering mode (WIP);
Camera now works through cameraserver;
Many, many other fixes.
Stable9 22.07.2017:
No more lags and hangs;
Removed ROM odex;
Art now used from Uber ROM;
Compiler optimization flags are taken from Uber ROM;
GPS is taken from madOS;
Ril fixes.
Stable8 07.07.2017:
Synced last LineageOS14.1 sources;
NFC taken from madOS 7.1.2;
ROM is odexed;
Kernel updated to 3.10.107;
Android security patch level: 05.07.2017.
Stable7 27.06.2017:
Synced last LineageOS14.1 sources;
Kernel updated to 3.10.106;
Full f2fs support.
Stable6 18.06.2017:
Synced last LineageOS14.1 sources;
Fixed hang with zram turned on;
Updated NFC configs;
Some fixes for f2fs;
Some fixes for BT;
Displaying operator name fixed;
No more fake NVRAM error;
Sdcardfs turned off by default due to some issues;
Some other changes & fixes.
Stable5 16.06.2017:
Synced last LineageOS14.1 sources;
Added f2fs support from extra fresh drivers;
Udated toolchain for Kernel build.
Stable4 12.06.2017:
Zram, zsmalloc & some other stuff backported from Kernel 4.1;
Added sdcards support;
Fuse replaced by sdcardfs;
Modem replaced, Wifi should work fine.
OMX codecs rolled out, they was cause of many troubles. I you want YouTube - use browser. This should be fixed by Google.
Low memory killer in Kernel updated;
Some other fixes.
Stable3 06.06.2017:
Synced last LineageOS14.1 sources;
Android Security Patch Level: 05.06.2017;
Power from xen0n.
Stable2 03.06.2017:
Synced last LineageOS14.1 sources;
Decreased system boot time;
Updated OMX codecs;
You can now switch off doubletap;
Fixed Youtube zooming bug;
VPN improved;
Updated ext4 & exfat drivers;
Improved energy consumption;
Kernel built with -O2 flag;
Other fixes & improvements.
Stable1 15.05.2017:
Fixed network traffic indicator;
Other RIL libs are used now;
Removed Gello browser, Jelly used instead.
Stable 10.05.2017:
Camera now fully working;
BT configs are updated to Android N;
Android Security Level 05.05.2017
Modem is replaced;
Other fixes.
Pre-Stables:
Release Candidate4 28.04.2017:
Updated LineageOS sources;
Kernel totally updated;
Added ability to on/off adaptive brightness control in AppDrawer;
Vibro frequency control now works;
Improved mediaserver politics;
Now all libs, except Mali drivers are compiled from sources;
libmrdump now compiled from sources;
bessound_hd_mtk updated to Android N;
Alarm in off state fixed;
libcameracustom is taken from Xtreme Android 5.1;
Wi-Fi improved;
Reverted back using healthd for charging, now charging used from mtk;
Other fixes and improvements.
Beta2 19.04.2017:
Updated to Android 7.1.2;
Many fixes in Kernel;
Vibro frequency now works;
Synced last LineageOS sources;
Mtk_agpsd fully working now;
Some other changes.
Beta1 09.04.2017:
More than 200 backports in Kernel;
Healthd now used as charger;
Synced last LineageOS sources;
Updated codecs xmls;
Removed bg processes limit.
Beta 31.03.2017:
Firmware version downgraded to beta - too many bugs to name it as RC, more work to do;
Bug with using BT & WiFI simultaneously, probably, fixed;
Limit background processes to 5;
Fixed Livedisplay lags;
WiFi AP mode now working;
WiFi now skips empty SSIDs;
Fixed hwui fc;
Many fixes in Kernel;
ipv6 now works in Kernel;
Updated BT configs;
Removed audio menu from engineering menu;
BT in engineering menu now works;
Libcurl included;
Option to turn on onscreen buttons;
mtk-kpd now parsed without errors;
Synced last LineasgeOS sources;
Something other we forgot to mention.
Release Canidate2 25.03.2017:
For root install [SuperSU] [System-Mode] [2.79 SR3] by mauam;
Some codecs updated to Android7 , some still used from Android6;
Included YouTube patch v1, this temporary fixes problem;
Open source drives for GPS, ccli-lib, lights;
Security vulnerabilities fixed in Kernel;
Some other fixes in Kernel;
Synced last LineageOS sources;
Updated ril libraries;
Realized changing RGB colour in Kernel;
Night display is off, better use Live display;
Doze from Meizu;
Brought back mtk_agpsd;
YGPS included;
Updated ligui_ext, libui_ext;
Some other fixes we forgot to mention.
Release Canidate1 18.03.2017:
Now all hardware works;
Implemented sensors calibrating in engineering mode.
alpha 26.02.2017:
We're moved to LineageOS sources due to last circumstances (you know well).
14.10.2016:
Initial first build for testing purposes only. After flashing you may encounter that surfaceflinger don't starts, this solved by copying this file from your pc via adb in recovery or copying this file second time after flashing system in update-script.
Donations
If you want to thank developer for such hard work done during ROM developing, bringing latest LineageOS to our phone, bugless Kernel etc, you can donate any amount of money to him.
Donations are open via PayPal:
Please, consider donation any sum.
Awesome cant wait to see the development on this rom
Has great potential!
Sandstranger........
The new Verevka for the Jiayu S3.......
I have high hopes placed here...... In this CM 14.1
Thanks for your work
@sandstranger I build a ROM with your sources, but this ROM don't boot. Why? Can you help me?
Enviado desde mi S3 mediante Tapatalk
Thank you developer !!!!!
Love you
Is the development of this ROM still continuing?
No , I am going to start building lineage os 14.1
cedricboquiren said:
Is the development of this ROM still continuing?
Click to expand...
Click to collapse
and
sandstranger said:
No , I am going to start building lineage os 14.1
Click to expand...
Click to collapse
Yes, developing now continues, we'll just move to LineageOS sources instead of CM, it's just a rebranding, you know. Stay tuned here)
sandstranger said:
No , I am going to start building lineage os 14.1
Click to expand...
Click to collapse
That is great news. Thank you. We all look forward to the result of your work
:good:
Thx, i will test it...:good:
What is the difference between this rom and the Aosp N for the Jiayu s3
Verstuurd vanaf mijn S3 met Tapatalk
Just google differences between CyanogenMd ans AOSP.
Waiting, Waiting Lineage 14.1.........
Waiting, Waiting Waiting, Waiting.....Waiting, Waiting
so will you be focusing on N now or still update the MM? i think N would be better
good luck on this.
i'll just keep an eye on this for a while 'til it got stable build, i already had too much flashing, i'm scared that i might broke my phone.
Please, be patient, developing N is more complex than MM, it takes more time, so, no ETA. Just wait and you'll be rewarded.
Work in progress...
What working or not?
Sent from my S3 using XDA-Developers Legacy app
Borizzz said:
View attachment 4054114
Work in progress...
Click to expand...
Click to collapse
Great news... Hopefully fast charge is supported...Thanks for your hard work.
AICP is a free, community built distribution of Android 6.0.1 (MarshMallow) which greatly extends the capabilities of your phone.
This is the unofficial Build of AICP11 for Jiayu S3 (advanced and basic, not S3 plus), with MT6752 SoC.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* Your warranty is now void.
*
* We aren't responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
What's not working:
None.
TODO:
Add NTFS support;
Improve HDR in Camera.
Install notes:
Please, make full wipes or get bootloop.
Sources:
https://github.com/Shokerface/android_kernel_jiayu_s3_h560
https://github.com/sandstranger/android_device_jiayu_s3_h560
https://github.com/sandstranger/android_vendor_jiayu_s3_h560
https://github.com/sandstranger/android_device_jiayu_s3_h560/tree/aicp11
Based on The M.A.D Team device tree.
Developer:
sandstranger
Download:
Сheck downloads tab.
Thanks to:
Verevka
The. M.A.D. Team
Zormax
XDA:DevDB Information
[ROM] [6.0.1] Unofficial Sandstrangers AICP11 - JiaYu S3 [MT6752], ROM for the JiaYu S3
Contributors
Borizzz, sandstranger, Verevka, superdragonpt, DerTeufel1980, fire855
Source Code: https://github.com/sandstranger/android_device_jiayu_s3_h560/tree/aicp11
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP for MM from The M.A.D. Team
Based On: AICP11
Version Information
Status: Stable
Current Stable Version: Stable1
Stable Release Date: 2017-04-15
Created 2017-02-05
Last Updated 2017-04-15
XDA:DevDB Information
[ROM] [6.0.1] Unofficial Sandstrangers AICP11 - JiaYu S3 [MT6752], ROM for the JiaYu S3
Contributors
Borizzz
ROM OS Version: 2.3.x Gingerbread
Version Information
Status: Testing
Created 2018-03-02
Last Updated 2018-05-03
Changelog
15.04.2017 Stable2:
Synced last LineageOS13 sources;
Updated codecs from LineageOS;
Kernel updated with more than 300 backports;
Alarm in off state now working;
Thunderquake engine implemented in Kernel, so vibro frequency now works;
Wifi patch from danielhk rolled out;
Improved sleep mode;
UniqueDeviceId & PersistentStorage implemented;
Android Security Level 01.04.2017;
26.03.2017 Stable1:
Fixed LiveDisplay lags;
Fixed security vulnerabilities in Kernel;
Some other fixes in Kernel;
Updated drm libraries;
H264 codec is back;
Updated videocodecs alsps 7.0
WiFi now skip empty SSIDs;
Fixed FMRadio - no more lags, drivers are taken from Lenovo;
Fixed Hall sensor by The M.A.D. Team stuff;
Initial SmartWake support, but it isn't working yet;
Doze mode is working!
Added LED lights notifications menu;
Added onscreen buttons;
Energy consumption optimizations;
Updated ril libraries;
Added sensors calibration in engineering menu;
YGPS included;
Fixed modem mode for BT;
Camera now records using software codecs;
Open source drivers for lights, cci_lib;
Synced last AICP11 sources;
Fixed hardware buttons vibro, thanks to romkit;
Kernel rebuild with uid_cpu_time support;
WiFi 5Ghz fixed, thanks to DeckerSu;
Added selection of WiFi 5Ghz in WiFi menu.
Included flag of fixing bug in egl;
Updated libfmcust.
BT fixed, headset now working, calls now working;
Audio configs are taken from Lenovo;
Fixed FMRadio;
This build is user now, so no internal root, you must root this ROM manually.
10.03.2017 RC3:
AOSP sources updated to MOB31T;
Android Security Patch Level: 2nd of February, 2017;
CM13 repo updated to LineageOS (bundled root don't working, so AICP extras also don't working, you should install SuperSU and that solves all problems);
Kernel updated to 3.10.105;
Kernel now supports bfq mode;
Kernel now supports sockets killing;
Hall sensor now works!
Custom power library for mtk;
Updated DRM libs;
Greatly improved ril;
Initial support of FMRadio;
Implemented mtk color support;
Fixed wrong battery voltage displaying;
Kernel now supports exfat;
Other improvements.
18.02.2017 RC2:
Synced last sources anroid6_r78 (MOB31K);
Security updates from 01.01.2017;
Device tree cleaned from prebuilt stuff, most libs are compiled from sources;
Fixed vibro problems, but vibro on hardware buttons still don't work. Added submenu in Sounds menu where you can set vibro strength;
Torch is working now;
Probably fixed device hangs when plugging headset;
Fixed third-party cameras work;
Only hardware video decoder used during video recording;
Removed camera libs from The M.A.D. Team;
Updated camera libs;
Deleted plenty of prebuilt binaries and libs;
Updated BT configs;
Updated nvram blobs and file_op blob;
Only hardware video decoder used during YouTube video playback;
Battery consumption optimizations.
07.02.2017 RC1:
Fixed device hangs when playing sound in BT-handset;
Gyroscope is working now;
wpa_supplicant now compiled from sources instead of prebuilt version.
05.02.2017 first testing build:
Latest AICP11 sources;
Many features are taken from [ROM] [6.0.1] Unofficial Sandstrangers LineageOS/CyanogenMod13 - JiaYu S3 [MT6752];
Engineering menu;
Libs from Android MM;
Kernel 3.10.104.
Reserved
@sandstranger will develop an aicp12.1 in a future?
Congratulations for this contribution! ^^
Enviado desde mi SHIELD Tablet K1 mediante Tapatalk
Trying out now, so far so good, just got some delay in ui
Some screenshots of the ROM would be great.
AICP11 RC1 is out. You can check changelog in 2nd post of this thread. As usually download ROM - from Downloads tab.
RC1 is working flawlessly for now. Only one issue: Snapchat FC's when I log in. Keep up the good work guys!
RC2 is out.
Changes are the same as in LineageOS, be sure to check Changelog.
And grab this ROM from Downloads tab.
I have installed this update RC2 . I'm very happy. It's very good. The only bug for me is that when I receive or emit a call from the bluetooth of my car (Dacia Logan) you will only hear an unbearable interference noise. However the music was transferred from my cell to the bluetooth of my car perfectly. Another element to improve would be the translation into other languages (please, Spanish) of the AICP extras. Many thanks @sandstranger and @Borizzz
Bt bug is fixed and will be available in next build.
Borizzz said:
Bt bug is fixed and will be available in next build.
Click to expand...
Click to collapse
that makes me very happy
So far so good in rc2. just a bug report, when I want to disable hardware buttons, it will just turn off the button lights but it is still functioning. And vibrator functionality is not working properly. When setting it to 0% the intensity never change.
Unfortunately, there will be no future AICP11 builds - @sandstranger is disappointed by AICP - 11 version seems like abandoned, no bug fixing by its developers.
Also seems like AICP 12 isn't developed anymore - almost all features are taken from CM. @sandstranger want to build CM14.1 instead.
Borizzz said:
Unfortunately, there will be no future AICP11 builds - @sandstranger is disappointed by AICP - 11 version seems like abandoned, no bug fixing by its developers.
Also seems like AICP 12 isn't developed anymore - almost all features are taken from CM. @sandstranger want to build CM14.1 instead.
Click to expand...
Click to collapse
Why he is disappointed? Everything is working fine now and a few bugs remain,. This rom is my daily driver.
Surprisingly Release Candidate 3 is out.
Check Changelog first.
Download from Downloads tab.
Wow, this rc 3 is so good, didn't experience any force close or lag as of now. Gonna test this on daily use. ?
AICP11 Stable will be released in next few days, so, stay tuned!
Borizzz said:
AICP11 Stable will be released in next few days, so, stay tuned!
Click to expand...
Click to collapse
Gonna wait for this, loving the stable cm, so I'll stay at cm for now
Borizzz said:
AICP11 Stable will be released in next few days, so, stay tuned!
Click to expand...
Click to collapse
Thanks Borizz, looking forward to flashing AICP stable version soon from mad rom 7.1.1 stable 6
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction:
CodeX makes your device even snappier than before. Being a battery and performance balanced kernel it never compromises on stability. You know why? Cause your device deserves it! CodeX main priority is battery. More Juice equals More Fun. Introducing the new CodeX Kernel Updater, which downloads the latest builds available from the remote server and flashes it automatically! All you need is network access to download the latest builds from the app. Then just click the Flash Kernel option in the navigation menu to flash the kernel. This app flashes the kernel through TWRP automatically and reboots your device with the latest CodeX Kernel
Rules that CodeX follow:
Be up to date with linux-stable
Stability and Security are at peaks
Features will be added based on Stability (If some feature breaks the stability, then I'll need to break it)
Have fun. And yeah, let me know if you need any feature. I'll always consider user opinions. But as I said, If that feature breaks the stability then I'll consider removing it!
Okay, time for most Interesting part, FEATURES!
Features:
OTA
More Juice
Built with clang-7.0.2
Latest CAF upstream tag merged (LA.UM.6.2.r2-04800-sdm660.0)
Latest linux-stable upstream (4.4.150)
Built on OOS source
DT2W support
Deep sleep fixed
Dirty Ratio tweaks
Better performance than stock
KCAL color control
Boeffla wake lock blocker
CPU wake boost driver
Switch for Fsync
Wireguard VPN support
Audio Control
Disables dm-verity
AnyKernel2 Flashable
CPU Governors:
Alucard
Blu_active
I/O Schedulers:
Maple(default)
TCP:
Westwood(default)
Instructions:
1. Download both the builds (given below).
2. Flash both of them in TWRP/RWRP.
3. Reboot and enjoy
Downloads:
CodeX Updater:
Don't install any of these APKs directly without flashing the Version 1.0 zip! (If you do so, Flashing Kernel option crashes the app!)
Version 1.1 It is a zip to install the app with the right privileges. The app has auto-updater for latest releases
CodeX Kernel:
Version 1.3
Version 1.4
Version 1.5
Version 1.6
Version 1.7
FAQs:
1. Can you add xyz feature?
A. As already said, I'll always consider user opinions. But as I said, If that feature breaks the stability then I'll consider removing it!
2. Why the app needs internet for loading changelog or while flashing kernel?
A. Well, the app tries to load the latest changelog available in the remote server. And regarding flashing kernel, it makes sure that you're flashing latest version of the kernel.
3. Battery drains a lot! Damn CodeX?!
A. I've added most of the battery patches to the kernel. Still if battery drains faster for you, then consider either calibrating your battery or use an app like BetterBatteryStats to know what's causing the drain. Alternatively, I suggest using Greenify.
4. Which ROMs does this kernel support?
A. Have a look at the title. Only AOSP/LOS based ROMs. Though you can try it on MIUI, but you may face bugs
5. Why does the app says CodeX not found?
A. Well, I made this app to work exclusively with CodeX Kernel. I may plan to support other kernels in the future.
6. App Force closes on clicking Flash Kernel?
A. Make sure that you have your Updater in the system.
Thanks to:
@AxelBlaz3 for inviting me to continue his project. He'll work on it when he finds time.
@mihran_thalhath for helping me with some kernel things :good:
@sscsps for his cloud. CodeX shouldn't be existing without him
@Psycho-Mods for helping me in UI designing and fixing weird bugs in the CodeX Updater app.
@Shahan_mik3 for DT2W on custom ROMs.
@shekhawat2 for qcacld driver (Wi-Fi fix).
@nathanchance for the commits I've cherry-picked.
@Sultanxda for several battery and performance commits.
@franciscofranco for battery tweaks.
@osm0sis for AnyKernel2
Sources:
https://github.com/MiguelNdeCarvalho/Codex-Kernel
Telegram group:
Codex Kernel | Whyred: https://t.me/codexkernel
Whyred - OFFICIAL: https://t.me/redminote5proofficial
XDA:DevDB Information
[KERNEL][OTA][AOSP/LOS][CLANG-7.0.2][4.4.150] CodeX Kernel v1.6 [August 18, 2018], Kernel for the Xiaomi Redmi Note 5 Pro
Contributors
MIguelNdeCarvalho, AxelBlaz3
Source Code: https://github.com/MiguelNdeCarvalho/Codex-Kernel
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v1.7
Stable Release Date: 2018-08-18
Created 2018-07-23
Last Updated 2018-08-18
Changelog:
Version 1.3 (July 23, 2018)
Latest linux-stable upstream (4.4.143),
Latest CAF upstream tag merged (LA.UM.6.2.r1-09500-sdm660.0),
Remove Adreno Boost,
Remove Adreno Idler
Version 1.4 (July 25, 2018)
Latest linux-stable upstream (4.4.144)
Version 1.5 (August 4, 2018)
Latest linux-stable upstream (4.4.145),
Latest CAF upstream tag merged (LA.UM.6.2.r2-04800-sdm660.0),
Add sound control,
Enabled sound control by default,
Added more frequencies and dropped voltage. Thanks to Mihran,
Fully working on Android P
Version 1.6 (August 16, 2018)
Latest linux-stable upstream (4.4.148)
Version 1.7 (August 18, 2018)
Latest linux-stable upstream (4.4.150)
The Codex Updater link is unavailable...
Why another thread?
bayad said:
The Codex Updater link is unavailable...
Click to expand...
Click to collapse
already fixed
alreadyregistered said:
Why another thread?
Click to expand...
Click to collapse
because the project will be mantained by me and Axel will only help me, he has no time
Audio control feature ??
Ara Seferian said:
Audio control feature ??
Click to expand...
Click to collapse
I am not so experienced with kernel, but I will take a look
Uh oh. This happened.
The AndroidGuy said:
Uh oh. This happened.
Click to expand...
Click to collapse
Soon you'll have to ask Google for permission before making a phone call.
peter-k said:
Soon you'll have to ask Google for permission before making a phone call.
Click to expand...
Click to collapse
Haha:silly:
New Build Is Up!
Version 1.5 (August 4, 2018)
Latest linux-stable upstream (4.4.145)
Latest CAF upstream tag merged (LA.UM.6.2.r2-04800-sdm660.0)
Add sound control
Enabled sound control by default
Added more frequencies and dropped voltage. Thanks to Mihran
Fully working on Android P
Have fun!
Great
Thx brthr for this Kernel?? and Thx for Keeping it Updated
Updates Not Showing In The CodeX Updater App...
New Version 1.5, Still Showing 1.2 New Version
great kernel, best performance on AEX. Thanks.
i'm using AEX 5.7 now, how can i flash this kernel?
should i download v1.3 and v1.4? or just v1.5 and then flash it through RWRP?
edomiredo said:
i'm using AEX 5.7 now, how can i flash this kernel?
should i download v1.3 and v1.4? or just v1.5 and then flash it through RWRP?
Click to expand...
Click to collapse
You only need to download 1.5 and flash with twrp. sorry for my bad english.
Ver 1.5 UC/OC CPU
Big: 300 -> 2.2 Ghz
Litle: 300->1.8 Ghz
nghiabh said:
You only need to download 1.5 and flash with twrp. sorry for my bad english.
Ver 1.5 UC/OC CPU
Big: 300 -> 2.2 Ghz
Litle: 300->1.8 Ghz
Click to expand...
Click to collapse
so i can customize kernel configuration with Kernel Adiutor?
edomiredo said:
so i can customize kernel configuration with Kernel Adiutor?
Click to expand...
Click to collapse
Yes
nghiabh said:
Yes
Click to expand...
Click to collapse
it is just me or v1.5 is draining too fast than v1.2?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Introduction
LineageOS is a free, community built, aftermarket firmware distribution of Android 10 (Q), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Bugs
What's working:
Boot
Audio Playback
RIL (LTE/CALL/SMS)
DT2W (Double tap to wake), for now you have to use Kernel Adiutor or other kernel tweak apps to enable it.
Camera / Camcorder
FM Radio (Not-tested)
WiFi
Hotspot (2.4Ghz / 5Ghz)
Bluetooth
GNSS GPS
NFC
USB (ADB/MTP/PTP)
IR Blaster
Sensors
Proximity / Light Sensor
Touch
SELinux is Enforcing
Hardware Encryption
What's not working:
You tell me.
Installation instructions
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device (required when coming from stock!).
Flash ROM.
Optional: Install the Google Apps addon package.
Supported models:
m7: m7ul, m7spr, m7vzw
Downloads
Recovery : Official TWRP
Gapps : Open Gapps Arm 10.0
Rom : Download
Sources
HTC MSM8960 Android Dev
Donate
DONATE To Me
Big Thanks
LineageOS Team.
@Flyhalf205
@icxj1
@R1ghtC
@gimmeitorilltell
All M7/MSM8960 contributors.
XDA:DevDB Information
LineageOS 17 for One M7, ROM for the HTC One (m7)
Contributors
tarkzim
Source Code: https://github.com/LineageOS
ROM OS Version: Android 10
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Stock 5.X
Based On: LineageOS
Version Information
Status: Stable
Created 2019-09-19
Last Updated 2020-08-09
Changelogs
2020/09/14
Updated with September security patches.
Upstream updates and fixes.
2020/08/09
Updated to Android 10.0.0_r41 with August security patches.
Upstream updates and fixes.
2020/07/13
Updated to Android 10.0.0_r40 with July security patches.
Upstream updates and fixes.
2020/06/18
Upstream updates and fixes.
Removed LiveDisplay 2.0 HAL for now since the kernel drivers are buggy.
SELinux is now Enforcing again.
2020/06/07
Updated to Android 10.0.0_r37 with June security patches.
Upstream updates and fixes.
Added LiveDisplay 2.0.
Kernel memory management updates, Switched to MEMCG instead of Android LowMemoryKiller.
Added DT2W (Double tap to wake), for now you have to use Kernel Adiutor or other kernel tweak apps to enable it.
Fixed reboot timeout problems, now reboot to recovery/bootloader are both working.
2020/05/11
Updated to Android 10.0.0_r35 with May security patches.
Upstream updates and fixes.
2020/04/12
Updated to Android 10.0.0_r33 with April security patches.
Upstream updates and fixes.
2020/03/08
Updated to Android 10.0.0_r31 with March security patches.
Upstream updates and fixes.
Kernel updates.
Switched back to SELinux Permissive.
2020/02/13
Updated to Android 10.0.0_r27 with February security patches.
Upstream updates and fixes.
Fixed GPS crashes on previous build.
2020/01/12
Updated to Android 10.0.0_r23 with January security patches.
Upstream updates and fixes.
Bring back battery icon customizations.(By LOS team)
Enabled USB Fast Charge by default.
Added QC Time Service.
Fixed Bluetooth Audio routing.
Tweaked WiFi drivers, connections to 5G AP still unstable, but 2.4GHz is solid, i guess it's a hardware problem.
2020/01/04
Updated to LineageOS 17.1.
Updated to Android 10.0.0_r18 with December security patches.
Upstream updates and fixes.
SELinux is now Enforcing!
Fixed Proximity/Light Sensor.
Fixed Video playback artifacts issue.
Added KeyDisabler for disabling physical touchscreen buttons.
Fixed DRM HAL, rollback to Clearkey/Widevine 1.0 implementations.
Updated Kernel LowMemoryKiller drivers to 3.18 for better performances.
Updated Kernel SDFAT drivers.
2019/12/08
Upstream updates and fixes.
Fixed Camera/Camcorder.
Fixed Flashlight Torch.
Fixed FMRadio. (Not-tested)
Kernel PowerManager / Wakelocks updates.
Tweaked UI performances a little bit.
Fixed an issue which causes random reboots while using Wi-Fi.
2019/10/05
Upstream updates and fixes.
Fixed error messages after boot on previous builds.
Fixed Audio.
Fixed NFC.
Fixed WiFi.
Added back support for all variant.
Fixed media codec issues for video playback.
2019/09/19
Initial release of LineageOS 17.0 for M7.
Flashing might give you an error but it's fine, just ignore for now.
The System is unstable for alpha builds, and constantly crashing by NFC and Camera daemon, which is draining your battery, don't consider it as a daily driver.
Screenshots
here!
Reserved
Mine
Completely unexpected! I'm gonna try it asap, thanks
nice to see android 10 on our device.
Cool!!! We hope that you will succeed. A very pleasant surprise!
amazing job done by Dev @tarkzim go go go !!!
Just let me know if you want me to test your builds i'll be more than happy to support.
Wooow. That's unexpected!! Praying for camera and NFC fix but gonna try it out right now
new build released
Upstream updates and fixes.
Fixed error messages after boot on previous builds.
Fixed Audio.
Fixed NFC.
Fixed WiFi.
Added back support for all variant.
Fixed media codec issues for video playback.
Just one problem for me now.
Gestures navigations are superbbbbb! UI is snappy fluid than any ROM ever for HTC m7.
When I try to root by magisk it goes bootloop the ROM doesn't even boot.
And I can't find an SU file.
help me to root it. I want to re install it.
Thank you so much for giving such amazing experience for a phone that old.
mnsane said:
Gestures navigations are superbbbbb! UI is snappy fluid than any ROM ever for HTC m7.
When I try to root by magisk it goes bootloop the ROM doesn't even boot.
And I can't find an SU file.
help me to root it. I want to re install it.
Thank you so much for giving such amazing experience for a phone that old.
Click to expand...
Click to collapse
Use Magisk 19.5+
tarkzim said:
Upstream updates and fixes.
Fixed Audio.
Fixed WiFi.
Fixed media codec issues for video playback.
Click to expand...
Click to collapse
Thank you for building a Q ROM for a device so old! Though I was wondering what your main focus would be, your Android Pie ROM or Android 10 one? Or are you going to build them side by side?
Zentom said:
Thank you for building a Q ROM for a device so old! Though I was wondering what your main focus would be, your Android Pie ROM or Android 10 one? Or are you going to build them side by side?
Click to expand...
Click to collapse
Actually i will just focus on Q from now, since Pie is stable enough for me. (at least)
tarkzim said:
Actually i will just focus on Q from now, since Pie is stable enough for me. (at least)
Click to expand...
Click to collapse
Thank You for your support of this ancient but still incredible device! Hope it will live forever
tarkzim said:
Use Magisk 19.5+
Click to expand...
Click to collapse
How do I get 19.5?
chibuzorotu said:
How do I get 19.5?
Click to expand...
Click to collapse
There is a subforum for Magisk.
tarkzim said:
There is a subforum for Magisk.
Click to expand...
Click to collapse
Not the official one
Cos is only up to 19.4 in the official one
chibuzorotu said:
Not the official one
Cos is only up to 19.4 in the official one
Click to expand...
Click to collapse
That's official Canary version which is still the testing version for 10.0...
Not recognizing China Telecom SIM，device：M7VZW
Code:
/*
* By flashing this kernel, you understand that:
*
* You are flashing it on the right device.
* This kernel is flashed on a compatible ROM.
* I am not held responsible for any damage nor negative side effect that appears on your device.
This is a no-frills custom kernel for the Mi 9T and K20 designed to be used with the custom Android 10 ROMs. It's intended to be a simple alternative for the stock kernel that brings several under-the-hood enhancements.
Changelogs can be found in the second post of this thread.
Features:
Upstreamed with Linux and CAF tag
Compiled with Proton Clang by kdrag0n
Updated Energy Model and frequencies courtesy of kerneltoast and kdragon
K-Lapse support with recommended value hard-coded
Simple LMK, a custom low memory killer that improves memory management
GPU Boost
Debugging removed for increased performance
Credits:
osm0sis (for AnyKernel3)
kdrag0n (for a better compiler)
various devs for their help (Mi 9T devs and other devices, you know who you are)
Xiaomeme (because they are what they are)
Everyone else that I'm too lazy to call out on
Download link:
Removed
XDA:DevDB Information
Project Oberon, Kernel for the Redmi K20 / Xiaomi Mi 9T
Contributors
Watanabe_You
Source Code:
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2021-08-28
Created 2020-05-17
Last Updated 2021-08-28
Changelog:
August 28th 2021
Upstreamed F2FS
Upstreamed CAF to LA.UM.9.1.r1-10700-SMxxx0.QSSI12.0
Upstreamed kernel to 4.14.245
Fixed Little CPU boosting to max frequently
Fixed some minor errors during compile
Adjusted all frequencies for more efficiency
Under-the-hood fixes and optimizations
Older changelogs:
July 19th 2021
Updated for Android 11, if it works on Android 10 then let me know but I doubt it will.
Debugging removed
No more BSOD
Updated toolchain
Added some of the optimization codes
Boosted GPU and fingerprint stuff
Used effective frequencies, inefficient ones removed
Switched to Simple LMK for better memory management
March 14th 2021:
Updated to Linux Kernel 4.14.225
Updated CAF tag to LA.UM.8.1.r1-16900-sm8150.0
Removed more debugging
Reverted some changes for upstream kernel updates
Updated toolchain
Updated some of the optimization codes used
October 20th 2020:
Orokin-MiUI update will be on hold until I sort out a few issues
Orokin-AOSP:
Updated to Linux Kernel 4.14.200
Updated CAF tag to LA.UM.8.1.r1-16000-sm8150.0
Reworked Energy Model and frequencies for better efficiency
Removed more debugging for faster boot time
Updated ION and IOMMU
Device specific optimizations
Various under the hood changes
Built with updated Proton Clang
June 26th 2020:
Fixed random reboot issue
Orokin-AOSP:
Upstreamed Linux and CAF tag
Updated Simple LMK
Removed debugging code
Redo Simple LMK for better compatibility
Optimized Input Boost
Optimized cpuidle
Orokin-MiUI:
Upstreamed Linux and CAF tag
Reworked Simple LMK
Reworked CPU Input Boost
Relaxed Devfreq Boost frequency
Kernel-wide debugging removed
Improved fingerprint speed
Improved cpuidle power draw
June 1st 2020:
Fixed an issue where device boots into download mode
Reworked cpu input boost values
Disable debug configs
Fixed more build warnings for code stability
May 24th 2020:
Orokin:
Upstreamed Linux and CAF tag
Updated Simple LMK
Upstreamed F2FS
Added and tuned Devfreq Boost
CPU-specific optimization
Clean up ugly kernel name
Orokin-MiUI:
Added Simple LMK and Devfreq Boost
Upstreamed Linux and CAF tag
Upstreamed F2FS
Optimized for our device CPU
Switched to LZ4 compression
Various code fixes here and there
Upstreamed RCU for fast app launch
Enable Ultra Low-Power State
May 17th 2020:
Initial release
so it is the same as vantom kernel you didn't change much
thank you anyway for your work
Teslapela said:
so it is the same as vantom kernel you didn't change much
thank you anyway for your work
Click to expand...
Click to collapse
Yup, I'll be adding more when I get the time to.
any chance to core off and undervolting ?
wars045 said:
any chance to core off and undervolting ?
Click to expand...
Click to collapse
Nope, it won't be much of an improvement.
core off olsow?
volume bost?
I'd really appreciate audio level control if you are able to add it!
You can increase the charge current while charging faster?
Is it possible to overclock the device?
thi2812 said:
Is it possible to overclock the device?
Click to expand...
Click to collapse
No, it is already fast enough.
efr07 said:
You can increase the charge current while charging faster?
Click to expand...
Click to collapse
You need a good charger to hit faster charging, any modification isn't recommended.
Fingerprint doesnt work on latest Xiaomi.eu 20.05.21.
Wysłane z mojego Redmi K20 przy użyciu Tapatalka
bartosz066 said:
Fingerprint doesnt work on latest Xiaomi.eu 20.05.21.
Wysłane z mojego Redmi K20 przy użyciu Tapatalka
Click to expand...
Click to collapse
That is MiUI 12, all FOD are broken for custom kernels. Wait for xiaomeme to release a fix
Watanabe_You said:
No, it is already fast enough.
You need a good charger to hit faster charging, any modification isn't recommended.
Click to expand...
Click to collapse
I have a charger at 27w. Please make a modification for faster charging.
I have continuous restarts after starting the phone - coltos v5.9
wars045 said:
I have continuous restarts after starting the phone - coltos v5.9
Click to expand...
Click to collapse
Is that the ROM with Mi 9 FoD?
I'm troubleshooting that problem right now.
i dont know, how to check?
wars045 said:
i dont know, how to check?
Click to expand...
Click to collapse
Which kernel did you use?
vantom
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
wars045 said:
vantom View attachment 5028057
Click to expand...
Click to collapse
Uh, please bring it up with the ROM developer and pray he talks to vantom about it.
If I ever find the cause I'll let him know, if someone unbans me from the telegram group.