Related
I've had a few cases so far. Ringke Flex and the Spigen Neo Hybrid.
I had the Spigen the longest, for maybe a month. It looks great, but the square design gets to be very uncomfortable and hard to reach areas of the phone while in use. The buttons are incredibly responsive. Which is a plus for casual use, not a plus when you don't want them to be as responsive, either in pocket or using as a camera. The Ringke Flex I had for a week. The case is a very nice fit, but the buttons are almost rock hard to push, the back is slippery due to an odd design, and the case still adds an extended bulk which is kind of strange.
My prior phone was a Galaxy Nexus, and had a Diztronic case after following up on great Amazon reviews. For whatever reason, I thought I would get something more visually appealing and fancy for this device.
http://www.amazon.com/gp/product/B00JQMDGG8/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
In the end, I just went back to where I started. Unless you are one of those people who enjoy having a very bulky case (Lifeproof/Otter) for max protection, the Diztronic TPU case is a very nice slim fit, has the best matte finish I've seen for people with sweaty hands or just enjoy a better grip, and the phone physically still looks very appealing. The buttons are also the most tactile and responsive I've seen on the cases to date. Anyone looking for something minimalistic, but has some protection which is not over the top, you can do far worse then spending $10 on this case. Cannot recommend enough.
*Unfortunately tried to take photos, but my best camera is the one on the S5!
you think it would fit the OEM wireless back cover?
Barakfel said:
you think it would fit the OEM wireless back cover?
Click to expand...
Click to collapse
Technically, it does not fit the OEM wireless cover. However, I used a heat gun to stretch mine out, and the fit is OK, though not perfect. You can still see a little bit of the silver on the sides of the phone. The volume and power buttons work fine. I've been using the case now for over a week and there are no functionality issues.
Not familiar with the other backing myself. Like the other poster mentioned, it's a nice tight fit, so some finagling may be required to get it to work.
sanjurotsubaki said:
I've had a few cases so far. Ringke Flex and the Spigen Neo Hybrid.
I had the Spigen the longest, for maybe a month. It looks great, but the square design gets to be very uncomfortable and hard to reach areas of the phone while in use. The buttons are incredibly responsive. Which is a plus for casual use, not a plus when you don't want them to be as responsive, either in pocket or using as a camera. The Ringke Flex I had for a week. The case is a very nice fit, but the buttons are almost rock hard to push, the back is slippery due to an odd design, and the case still adds an extended bulk which is kind of strange.
My prior phone was a Galaxy Nexus, and had a Diztronic case after following up on great Amazon reviews. For whatever reason, I thought I would get something more visually appealing and fancy for this device.
http://www.amazon.com/gp/product/B00JQMDGG8/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
In the end, I just went back to where I started. Unless you are one of those people who enjoy having a very bulky case (Lifeproof/Otter) for max protection, the Diztronic TPU case is a very nice slim fit, has the best matte finish I've seen for people with sweaty hands or just enjoy a better grip, and the phone physically still looks very appealing. The buttons are also the most tactile and responsive I've seen on the cases to date. Anyone looking for something minimalistic, but has some protection which is not over the top, you can do far worse then spending $10 on this case. Cannot recommend enough.
*Unfortunately tried to take photos, but my best camera is the one on the S5!
Click to expand...
Click to collapse
I agree. I had the Diztronic on my Nexus and the S5 case is even nicer. If you want something that will give a measure of protection without putting your phone in a hermetically sealed pickle jar, Diztronic is the answer.
Thanks guys! I don't come on XDA as often as I used to, but I was browsing the accessory thread this morning to do some research as to the demand of a case that will work with the wireless charging door. Nice start to my morning to find this thread!
It sounds like quite a few people want a case that will work with the official samsung charging door and their S5. I didn't make it before as my thinking was can't they just put a Qi receiver pad under their stock door and use any case they want? I guess the problem with that is it won't seal tight enough to keep water out. So a case that fits the wireless door is needed.
I'll think it over today. But I think there is a good chance well make a new case specifically for the wireless charging door. I'll post an update on our website if we do.
I would buy one. Already own diztronic case for s5 and s2. I think many of us would prefer a matte front (same finish as the back). The shiny black plastic all consumer electronic manufacturers are using looks cheap with reflections, scratches, and fingerprints.
Samsung should have included wireless charging in the s5 along with a magnetic charging port like the Nexus 10 pogo, and front speakers. Instead we have a worthless heart rate sensor.
We could try a matte front, I just don't think it looks as nice against the glossy screen. In my opinion the glossy lip blends better next to the display, almost like you don't even have a case on. Unlike our competitors that have recently started offering similar style cases as ours, only our front lip is glossy. Their cases the entire top half is glossy, similar to our old S2 case.
The S5 wireless charging door case could be a good model to test full matte on though.
Barakfel said:
you think it would fit the OEM wireless back cover?
Click to expand...
Click to collapse
you could always get this it wirelessly charges through the case just fine using it on my S5 with the neo hybrid case just fine. as for keeping the water protection it seems to work just fine put my phone in the fishtank for 25 mins with no issues to test it.
http://www.amazon.com/gp/product/B00F3J2KJW/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
Does the diztronic case mess up screen protectors? Im using a tempered glass right now.
heshamtecom said:
With all respect, I belive Obliq Xtreme Pro is the best Galaxy S5 TPU case, have a look and let me know http://www.galaxy-s5-cases.com/
Click to expand...
Click to collapse
That's not a TPU case. It contains TPU on the inside, buts it's a dual layer two piece case with a polycarbonate shell. it's basically exactly the same as our Reactor case for the GS5. It's a fine case, but personally I don't like dual layer cases on my phone. Too bulky. According to that page you linked it weighs 5 ounces! That's a tank compared to a 21g TPU case. It's a totally different class of product then a traditional single layer TPU case. It also does appear to "borrow" heavily from UAGs design. I really hate it when companies do that, but it is what it is, happens in every industry.
---------- Post added at 08:24 AM ---------- Previous post was at 08:09 AM ----------
theo_yuxda said:
Does the diztronic case mess up screen protectors? Im using a tempered glass right now.
Click to expand...
Click to collapse
I prefer to think of it as the screen protectors not being compatible with cases I think it's far more common for someone to only have a case than to only have a screen protector. The vast majority of people using screen protectors will also use a case. However many use a case but no screen protector. Given that, companies that make screen protectors should do a better job making sure their products can be used with a case.
To answer your question (somewhat) , I used a tempered glass SP on my old S4 and one of our cases. It was a bit of a stretch, but after a day or two it fit well enough. I haven't tested it on an S5 however. We are going to start adding a small amount of depth to our cases in the future, likely 0.25mm to better accommodate thick screen protectors. We have to be careful that the case still fits well for those that don't use screen protectors. The new OnePlus One is the first case well be testing this on.
Ive had this case for my S3. Wonderful case and great price.
Unfortunately, they dont ship to the Netherlands. I really want this one
Sent from my SM-G900F using XDA Premium 4 mobile app
I currently own the S5 G900F with the Official S-View Cover, due to the case becoming unpleasantly dirty (White to black) and the realization that the phone might not last me very long with this level of protection, Im in the search for a new case.
I need this case to be a bull coverage case, which means that it will have to have a inbuilt screen protector, for I can not apply one to save my life. It must also be as compact as possible, while offering great levels of protection, as I have small hands.
Cases I have been looking at are the Otterbox Defender Series (S5), and the i-Blason ArmourBox
OtterBox - My concerns about this case, is the 'Echo' that certain members of the community suffer, although someone has 'found a cure' for this, which is to find and peel away hidden stickers inside the case, I am not sure, as I have only heard of it once. This is a very popular case and seams to offer the most protection. It also adds quite some size to the phone, which may become annoying.
i-Blason - This is not a very popular case, but seams to be thinner and smaller than the OtterBox. It is cheaper, but price does not really matter as both cases are competitively price in the UK. It seams to offer good protection.
One of my biggest worries with both cases is the functionality of the FingerPrint Unlock, this is something I use and take pride of on my mobile, and would hate to have to use it, would these cases allow for the use?
Secondly, the inbuilt screen protectors, is there any 'give' as in, does it feel like you are not touching the screen?
Any opinions and suggestions would be greatly appreciated, thanks
Pedroc1999 said:
I currently own the S5 G900F with the Official S-View Cover, due to the case becoming unpleasantly dirty (White to black) and the realization that the phone might not last me very long with this level of protection, Im in the search for a new case.
I need this case to be a bull coverage case, which means that it will have to have a inbuilt screen protector, for I can not apply one to save my life. It must also be as compact as possible, while offering great levels of protection, as I have small hands.
Cases I have been looking at are the Otterbox Defender Series (S5), and the i-Blason ArmourBox
OtterBox - My concerns about this case, is the 'Echo' that certain members of the community suffer, although someone has 'found a cure' for this, which is to find and peel away hidden stickers inside the case, I am not sure, as I have only heard of it once. This is a very popular case and seams to offer the most protection. It also adds quite some size to the phone, which may become annoying.
i-Blason - This is not a very popular case, but seams to be thinner and smaller than the OtterBox. It is cheaper, but price does not really matter as both cases are competitively price in the UK. It seams to offer good protection.
One of my biggest worries with both cases is the functionality of the FingerPrint Unlock, this is something I use and take pride of on my mobile, and would hate to have to use it, would these cases allow for the use?
Secondly, the inbuilt screen protectors, is there any 'give' as in, does it feel like you are not touching the screen?
Any opinions and suggestions would be greatly appreciated, thanks
Click to expand...
Click to collapse
Here's what I use and recommend: Galaxy S5 Case, S5 Case, New Trent Trentius [Heavy Duty] It feels good in the hand, has it's own screen protector and 3 colored backplates. I also use a tempered glass protector under it. They are not like film screen protectors, very easy to put on with no mistakes.
Thanks for the reply, that is very interesting, just a few questions...
Does it suffer from the 'echo' like other cases?
Is the screen protector 'tight to the glass'
Sound volume? Is it reduced?
Also I have tried tempered glass ones too, still cant apply straight
Pedroc1999 said:
Thanks for the reply, that is very interesting, just a few questions...
Does it suffer from the 'echo' like other cases?
Is the screen protector 'tight to the glass'
Sound volume? Is it reduced?
Also I have tried tempered glass ones too, still cant apply straight
Click to expand...
Click to collapse
No echo that I've ever noticed. To be fair though, I'm on a custom rom that allows me to increase the stock volume level. The extra screen protector just gives it a nice tight feel. No problems at all with touchscreen.
I watched a review and have to ask, how are al,l the holes aligned up? And by this I mean the homebutton cutout, LED and camera cutout etc
Pedroc1999 said:
I watched a review and have to ask, how are al,l the holes aligned up? And by this I mean the homebutton cutout, LED and camera cutout etc
Click to expand...
Click to collapse
Lined up perfectly on my phone.
What colour have you picked? Do you mind snapping a picture?
Pedroc1999 said:
What colour have you picked? Do you mind snapping a picture?
Click to expand...
Click to collapse
It comes with all three backs. I can't take a picture as it's on my phone
Okay, possibly final question, I work alot with pens etc, will this case easily pick-up pen marks etc?
Pedroc1999 said:
Okay, possibly final question, I work alot with pens etc, will this case easily pick-up pen marks etc?
Click to expand...
Click to collapse
Can't say, I never keep anything in the same pocket as my phone.
What would you say are the bad points on your current case?
Im still wanting to get a Defender, is this a bad decision?
Why not a lifeproof fre? Waterproof, dust and shockproof..i live by them..been on my s3,s4 and now s5. The warranty is key too....
bx10r said:
Why not a lifeproof fre? Waterproof, dust and shockproof..i live by them..been on my s3,s4 and now s5. The warranty is key too....
Click to expand...
Click to collapse
Thank you i was just about to say the same thing! I also have the Trent Case but nothing compares to the Lifeproof
---------- Post added at 08:25 PM ---------- Previous post was at 08:21 PM ----------
Pedroc1999 said:
I currently own the S5 G900F with the Official S-View Cover, due to the case becoming unpleasantly dirty (White to black) and the realization that the phone might not last me very long with this level of protection, Im in the search for a new case.
I need this case to be a bull coverage case, which means that it will have to have a inbuilt screen protector, for I can not apply one to save my life. It must also be as compact as possible, while offering great levels of protection, as I have small hands.
Cases I have been looking at are the Otterbox Defender Series (S5), and the i-Blason ArmourBox
OtterBox - My concerns about this case, is the 'Echo' that certain members of the community suffer, although someone has 'found a cure' for this, which is to find and peel away hidden stickers inside the case, I am not sure, as I have only heard of it once. This is a very popular case and seams to offer the most protection. It also adds quite some size to the phone, which may become annoying.
i-Blason - This is not a very popular case, but seams to be thinner and smaller than the OtterBox. It is cheaper, but price does not really matter as both cases are competitively price in the UK. It seams to offer good protection.
One of my biggest worries with both cases is the functionality of the FingerPrint Unlock, this is something I use and take pride of on my mobile, and would hate to have to use it, would these cases allow for the use?
Secondly, the inbuilt screen protectors, is there any 'give' as in, does it feel like you are not touching the screen?
Any opinions and suggestions would be greatly appreciated, thanks
Click to expand...
Click to collapse
The Trent case is an awesome case especially since you can switch it up with the different back pieces but if you want a waterproof case then Lifeproof all day.
I've opted for the Lifeproof case with the screen protector; no real problems on this end. The case also works well with the Qi wireless charging kit.
I use the UAG Cover. Works really good for me. Dropped it round about 5-6Times....no damage
I have the screen protective film on my S5 (from the dealer) but when it gets scratched up, I won't replace it. I recommend the Spigen tough Armor case. Great protection and what I like the best is that the buttons don't stick out beyond the cover. I have had problems accidentally pressing the buttons while the phone was in my pocket. I always carry the phone in my pocket and the Spigen eliminates that problem. The relatively slick back cover makes it easy to get out of my pocket. The four corners on the back side are slightly raised to protect the camera lens and prevent scratches on the cover if the phone is dropped.
AND, no, I have no relationship with Spigen. Just credit given where credit is due.
Edit - the slightly raised corners are on the back side.
http://www.elementcase.com/Element-Case-Recon-Case-Samsung-Galaxy-S5-a/332.htm#CF
Best case ever!! Hands down!!! :good:
before i bought my zerolemon 8500, i used an otterbox defender.
Looks like a good protective case but it is big and ugly. Sorry. I'll keep my Spigen Tough Armor case.
I bought a case but I don't like the appearance and feel of it so I took it off. If I pay 700$ for a nice looking phone I don't want to put it into an ugly case. Especially when it has Gorilla Glass 4 on front and back.
What do you guys think?
MKBHD has a nice video about phone cases here: www.youtube.com/watch?v=Btr8uOU0BkI
I hate it too. But i dropped my phone like 2 times average for every phone i owned. So... yeah... i feel safe to "naked" only when i am home
Probaby anyone can suggest a good looking case?
Sent from my SM-G920F using Tapatalk
Yeah I always run cases on my devices since I like to keep them in prestine condition. I never drop my phones. If I do its maybe once a year lol but I still run one to be safe. I usually rock UAG because I can throw the phone around a little more than normal with those cases.
I didn't have a case on my Samsung Moment. I dropped it once and scratched up the side a bit. I put a skin on my HTC Evo Shift. Dropped it once and put a small dent in the plastic. When I got the S4, I decided I should protect it since it was more than I had ever paid for a phone, so I put a case on it. History suggested that I didn't particularly need it, but I'd rather have it and not need it than not have it when I need it. I can't replace my phone if I break it. I also went UAG on my S4 and loved it. I actually did drop the phone many times, but I might have also been less careful since I knew it had a case on it. With the S6, I wanted something maybe even slimmer than the UAG and that maybe could show off the good looks of my phone, so I went with a Spigen Ultra Hybrid.
I got a case that I love from spigen. It's not bulky, it's clear and it protects it from drop. It has that tech 21 rubbery feel.
http://www.amazon.com/gp/aw/d/B00QU4PN84
Sent from my SM-G920I using Tapatalk
I always rock cases on my phones. The S6 being glass on the front and back is definitely rocking one. Gorilla glass or not, it's still glass. I use the spigen neo hybrid. It looks classy and provides an adequate amount of protection for very little bulk added.
nateohio said:
I always rock cases on my phones. The S6 being glass on the front and back is definitely rocking one. Gorilla glass or not, it's still glass. I use the spigen neo hybrid. It looks classy and provides an adequate amount of protection for very little bulk added.
Click to expand...
Click to collapse
This is the case I use and it's very bulky and I don't like fake aluminium plastic. And not to mention the 1-2 mm raised lip front. Please dont say plastic looks classy.
I have always used cases to be on the safe side even though I have only dropped my phone once or twice at the most over the years, I will be using a case on my s6 when it arrives but as yet I'm undecided as to which case to get, I've considered the spiden neo hybrid but I have heard that it can reduce signal strength which I don't like the sound of, so I'm still looking for the right one
If you think this case is bulky, I'd hate to see what you'd say about a Otterbox Commuter or Defender series. That 1-2mm lip serves a purpose as drop protection. I don't consider slapping on a thin plastic low profile case as anything but scratch protection. If I'm going to put a case in a phone, it's primarily for drop protection. That being said, I do have the black version so it doesn't look like "cheap plastic aluminum"
I'm going to buy a simple TPU case, like the spigen liquid crystal
barondebxl said:
I got a case that I love from spigen. It's not bulky, it's clear and it protects it from drop. It has that tech 21 rubbery feel.
http://www.amazon.com/gp/aw/d/B00QU4PN84
Sent from my SM-G920I using Tapatalk
Click to expand...
Click to collapse
I bought the same case. It makes the phone less slippery wich is good. It also makes it slightly bulkier wich is bad. But it does feel protected.
Do you use that horrible back protector? I'm thinking of trying the case without it, hopefully it won't get scratched.
LOL the poll is so loaded. I have a case but I dont drop my phone. I just like keeping it in pristine condition. Having a case doesn't necessarily mean you are careless....
This is the case i use on mine. Its practically not even there, but offers some protection.
http://www.t-mobile.com/accessories/samsung-galaxy-s-6-protective-cover-clear-silver.html
I have that Spigen crystal clear cover and stopped using it after a day. It always looks dirty and ugly, it irritates me too much. I'll keep it for travelling when needed.
Agree with MKBHD's comments in that video posted earlier, I don't like cases generally and may end up getting a skin to stop this being so slippery like he did with his M8
I use the exact case when I use a case.
Sent from my SM-G920T using XDA Premium HD app
I'm thinking of getting this case http://www.lifeproof.com/shop/us_en/galaxy-s6-cases/galaxy-s6-fre-case/?color=Black+/+Black
Bulky AF but will protect the phone.
I have an iPhone 5S for work and it slipped out of my pocket and dropped from 2 feet high onto a concrete floor right on its top right corner. Screen turned into a spider web. I have a feeling same thing would happen to the S6. Better safe than sorry!
SammyTRK said:
I bought the same case. It makes the phone less slippery wich is good. It also makes it slightly bulkier wich is bad. But it does feel protected.
Do you use that horrible back protector? I'm thinking of trying the case without it, hopefully it won't get scratched.
Click to expand...
Click to collapse
I do use it but I don't think it's that bad lol. I love the case, it's the best one to still be able to see the design and color of the phone while protecting and not making it too bulky.
Sent from my SM-G920I using Tapatalk
My 2 cents. Buy a cheap TPU case to use when you first get your phone. First, it takes time for your hands to get used to the shape of a new phone and your risk of dropping the phone is greatest during this period. Second, you will be playing with your new phone more often than you would normally, and increasing the risk of a drop. Third, your anxiety levels when going naked with your brand new and very expensive phone will counterbalance the enjoyment of having a naked phone.
After about a month, get rid of the cheap case and enjoy the phone naked, knowing that if you scratch it or drop it, you now have a reason to buy the next phone on the horizon....
I use the Spigen slim hard case (back cover) but now I cant get the damn thing off the phone. I feel like I'm going to break the phone removing it
So I decided to do a review on a case which I've been using since my HTC One M7 days. It's the Urban Armor Gear case. This is my first ever review so I do apologise if it seems a bit biased but I'll try and make it as honest as possible.
Let's start off with some basic overview of the product itself.
The UAG Rugged Case for the HTC One M9 is a fused composite case that consists of a hard polycarbonate plastic and soft (but rigid to the feel) rubber. I personally love the military design of the back of the case. The rugged feeling is further enchanced by the rubber bolts that are near the edge of the case. The corners have rubber bumpers that absorbs impact from a drop on the corner of the device because let's face it, no device drops face down all the time right? A new addition from the old M7 case is the grips on the side of the case. I did find myself trying to grip my M7 firmly when I took it out of my pocket with the old case that didn't have the grips at the side but with the new M9 case, the added side grips are a godsend. While not everyone is into the solidness and rugged feel, I personally LOVE it.
Picking it up, you can immediately feel how solidly built it is with the plastic and rubber construction. It definitely adds some heft to the device but there's always two sides to a coin. I personally love the added weight because it tells me that I have a quallity product in my hands and I'm not afraid that anything will dent at all should a drop occur. Doing some research, there are other cases out there that have similar features like the Otterbox series of cases. I find that two seperate pieces is way too troublesome for me as assembly and deassembly can be a pain whereas the UAG can easily slip in and out although it's a bit difficult to get it out once it's in there which is good so I know that my M9 won't fly out of the case anytime soon lol.
Everyone knows about that shiny black top on the M9 right? It's the IR Blaster. UAG has actually thought of that and made a cut out at the top of the case for the IR! A nice addition! The only problem that I could find with the case after about one week of use is that the buttons are a bit hard to press straight out of the box. You need a period of "burn-in" for the rubber at the buttons to soften up before it feels normal to press. Another thing is the lack of colour options on the website. It's currently available in Ash (Smoked) and Maverick (Transparent) which is really little compared to when I had the M7 and it had colours like Aero, Outland and so on. I do hope UAG brings those colour options back for the M9.
Other than that, I really have nothing else to say about it. It's a rugged and solidly built case and I really like it a lot. It has both beauty and protection in one. Not many cases have both. If you're in the market for a rugged case and don't like the hassle of a seperate piece case like Otterbox, look no further than UAG.
I hope I wasn't too biased in this first mini review of mine. Do add your opinion in the posts below. I'd love to hear what others think of UAG's recent colour options like ash and maverick as compared to the solid colours.
Looking for a new case myself. Was kind of sold on the tech 21 but I've never had uag before and might invest..
dladz said:
Looking for a new case myself. Was kind of sold on the tech 21 but I've never had uag before and might invest..
Click to expand...
Click to collapse
If you're into the rugged protection type, then UAG is for you. But if you're into the slim cases or TPU cases, you might find that UAG cases adds a bit of weight and thickness to the phone.
Androidian10 said:
If you're into the rugged protection type, then UAG is for you. But if you're into the slim cases or TPU cases, you might find that UAG cases adds a bit of weight and thickness to the phone.
Click to expand...
Click to collapse
If I could get away with it then I'd probably go without a case, but weirdly on the flip side to that, out of the cases I have had, I don't mind chunky ones, I'm not a small bloke by any means and have pretty big hands ( note 4 was no problem) having said that, I've just ordered the verge versus in titanium, that's a two parter, next pay day which is a few days I'm going to get a few of them, uag, spigen hybrid and if I can find a tough case with the dot style then I'll be more than happy with that. I'd prefer not lose a feature.
dladz said:
If I could get away with it then I'd probably go without a case, but weirdly on the flip side to that, out of the cases I have had, I don't mind chunky ones, I'm not a small bloke by any means and have pretty big hands ( note 4 was no problem) having said that, I've just ordered the verge versus in titanium, that's a two parter, next pay day which is a few days I'm going to get a few of them, uag, spigen hybrid and if I can find a tough case with the dot style then I'll be more than happy with that. I'd prefer not lose a feature.
Click to expand...
Click to collapse
Maybe you could take a look at the Speck cases as well. I used to have the candyshell on my old old iPhone 3G S. Was a pretty good case with dual protection as well. I was choosing between the UAG and Candyshell as well. I'm planning on getting the Candyshell Grip for my next case.
Androidian10 said:
Maybe you could take a look at the Speck cases as well. I used to have the candyshell on my old old iPhone 3G S. Was a pretty good case with dual protection as well. I was choosing between the UAG and Candyshell as well. I'm planning on getting the Candyshell Grip for my next case.
Click to expand...
Click to collapse
Still waiting on the verge to be delivered, I'm a massive fan of Tech 21 as they've actually revolutionized the technology, also they can accommodate a phone with minimal footprint.
I've never heard of speck but i'll have a nose and see what they have to offer.
Strictly speaking i would love to have the hunter f for my phone but i doubt they'll make one, best looking cases period.
dladz said:
Still waiting on the verge to be delivered, I'm a massive fan of Tech 21 as they've actually revolutionized the technology, also they can accommodate a phone with minimal footprint.
I've never heard of speck but i'll have a nose and see what they have to offer.
Strictly speaking i would love to have the hunter f for my phone but i doubt they'll make one, best looking cases period.
Click to expand...
Click to collapse
I think the UAG stands out for me is because it eliminates the curved back of the phone. When you slip the phone into the case, it becomes a block so it won't wobble around when I put it on the table. But yeah, I'd say Speck and UAG are in the same category. But do come back with your views on the verge tho.
Androidian10 said:
I think the UAG stands out for me is because it eliminates the curved back of the phone. When you slip the phone into the case, it becomes a block so it won't wobble around when I put it on the table. But yeah, I'd say Speck and UAG are in the same category. But do come back with your views on the verge tho.
Click to expand...
Click to collapse
Will do, should be here tomorrow.
Dude.... that's not related to the thread at all. Make a new one with your question.
If the case came in other colours like Black or Orange, I'd be all over it. I'm not a fan of the transparent cases. This does seem like a well built, nice looking case though.
nice looking case
Hi there,
Did anyone bought any "Slim Fit" cover ( as the Air Skin from Spigen ) ? How was your experience with those ?
Actually I use ( as I always do ) the Spigen Tough Armour when at work but when I'm off I would like to enjoy the phone a bit more.
What I need is a thick and soft cover. Those on Amazon slips away from the phone even by using the adhesives they provide with or at least this is what I read on the review.
Any suggestions?
The bottom half is pretty standard across the board. The top isn't the most secure, but holds enough for causal use. Not talking about any one specific slim case. They all tend to slide up a bit because there is nowhere to anchor them.
Find one you like and use the spare stickers from the Spigen. Using one of the full body films can help keep it in place, too. Another option is some double sided tape below the screen. If you aren't trying to flip it open like a Zippo, it will stay on.
MySelf_v1 said:
Hi there,
Did anyone bought any "Slim Fit" cover ( as the Air Skin from Spigen ) ? How was your experience with those ?
Actually I use ( as I always do ) the Spigen Tough Armour when at work but when I'm off I would like to enjoy the phone a bit more.
What I need is a thick and soft cover. Those on Amazon slips away from the phone even by using the adhesives they provide with or at least this is what I read on the review.
Any suggestions?
Click to expand...
Click to collapse
I have used Spigen cases for years for my candy-bar phones - but for this phone I got a Ringke http://www.ringke.com/site/item.php?id=1&item=1248
It's basically 2 pieces of polycarbonate, and a small raised lip protects the main screen of the phone, as well as the outside. It's maybe 1.5mm raised from the small screen.
First, I haven't dropped it seriously (yet). It took a drop from waist-height onto a tiled floor without a problem - though the thing about falls, is that it does depend on HOW it falls.
Like all the slim cases it doesn't protect the hinge mechanism - but if you are looking for protection there, the case gets a lot thicker - and not sure if the phone would then rest flat on a surface.
I bought the transparent one, then bought the black variant - if you use the flash as a torch, the transparent polycarbonate transmits the beam all across the case...
I was looking for portability with "sufficient" protection, whilst being able to fit into my back pocket (yes, really!).
Because of the phone's form factor, the overall level of protection is fine for me
I bought one and sent it back for one particular reason. It is made of hard plastic, and when folded, it makes weird sound when mobile vibrates. Both hard shells vibrate against each other. Rest it is a sleek cover. SO far I found only the Samsung one to be most useful.
I just bought and tried both the tough armor and air skin. I sent the tough armor back.
Zero issues with case halves sliding on or off. Everything seems firm and secure. I really like the air case. Just enough for some protection and a better grip.
The tough armor completely ruined the zflip experience for me. Turned it into way to thick of a brick. At that point I'd prefer a candy bar phone.
Hope that helps OP.