Hi Guys, new to this so please indulge me a little!
Purchased two GT-P5100 Samsung Galaxy Tab 2s for the kids, checked the software version using *#1234# and received this:
AP: P5100UBALD4
CP: P5100UBLD4
CSC: P5100UUBALD4
Connect them to kies and it displays: latest firmware version: PDA:LD4 / PHONE:LD4 / CSC:LD4 (TTT)
Checked these at SamMobile:
GT-P5100 - Trinidad and Tobago
PDA: P5100UBALD4
CSC: P5100UUBALD4
Version: 4.0.3
Modified: 2012-04-17
Checked in firmware and files for Australian version (XSA) and found that here sammobile. com/firmware/?page=3&model=GT-P5100&pcode=XSA&os=1&type=3#firmware
Downloaded the firmware and flash programs files. Flash programs contained odin3 V1.87 and signed_espresso_20120220_16G.pit Firmware file contained: P5100XWALE3_P5100XSAALE1_P5100XXLD7_HOME.tar.md5
Put the tab into download mode after shutting down using power+volume right then volume left to enter odin mode.
Connected the tab with the usb cable, attached the pit file using PIT button then attached the md5 file using the PDA button. Re-partition deselected, auto-reboot & f.reset time were both selected, flash lock not selected. Pressed the start button. Process completed and the tab rebooted as normal.
Tried using *#1234# and received this:
AP: P5100XWALE3
CP: P5100XXLD7
CSC: P5100XSAALE1
When I connected to Kies I now see this:
"Your devices current firmware version is not supported to update firmware via Kies.
Current firmware version: PDA:LE3 / PHONE:LD7 / CSC:LE1 (TTT)
I assumed rightly or wrongly that the country designator should have changed to XSA. Does anyone have any idea if I have missed something in the process?
I checked Setting > About Device:
Model Number:
GT-P5100
Android version:
4.0.3
Baseband version:
P5100XXLD7
Kernel version:
3.0.8-546364-user
[email protected]#1
Build Number:
IML74K.P5100XWALE3
Within status, device status is normal
Appreciate any advice you can offer.
Cheers Paul
Solved
PaulCsyd said:
Hi Guys, new to this so please indulge me a little!
Purchased two GT-P5100 Samsung Galaxy Tab 2s for the kids, checked the software version using *#1234# and received this:
AP: P5100UBALD4
CP: P5100UBLD4
CSC: P5100UUBALD4
Connect them to kies and it displays: latest firmware version: PDA:LD4 / PHONE:LD4 / CSC:LD4 (TTT)
Checked these at SamMobile:
GT-P5100 - Trinidad and Tobago
PDA: P5100UBALD4
CSC: P5100UUBALD4
Version: 4.0.3
Modified: 2012-04-17
Checked in firmware and files for Australian version (XSA) and found that here sammobile. com/firmware/?page=3&model=GT-P5100&pcode=XSA&os=1&type=3#firmware
Downloaded the firmware and flash programs files. Flash programs contained odin3 V1.87 and signed_espresso_20120220_16G.pit Firmware file contained: P5100XWALE3_P5100XSAALE1_P5100XXLD7_HOME.tar.md5
Put the tab into download mode after shutting down using power+volume right then volume left to enter odin mode.
Connected the tab with the usb cable, attached the pit file using PIT button then attached the md5 file using the PDA button. Re-partition deselected, auto-reboot & f.reset time were both selected, flash lock not selected. Pressed the start button. Process completed and the tab rebooted as normal.
Tried using *#1234# and received this:
AP: P5100XWALE3
CP: P5100XXLD7
CSC: P5100XSAALE1
When I connected to Kies I now see this:
"Your devices current firmware version is not supported to update firmware via Kies.
Current firmware version: PDA:LE3 / PHONE:LD7 / CSC:LE1 (TTT)
I assumed rightly or wrongly that the country designator should have changed to XSA. Does anyone have any idea if I have missed something in the process?
I checked Setting > About Device:
Model Number:
GT-P5100
Android version:
4.0.3
Baseband version:
P5100XXLD7
Kernel version:
3.0.8-546364-user
[email protected]#1
Build Number:
IML74K.P5100XWALE3
Within status, device status is normal
Appreciate any advice you can offer.
Cheers Paul
Click to expand...
Click to collapse
Managed to solve the problem by performing a factory reset. Devices now display XSA in Kies
Hi, I have an unbranded P5100 (wifi + 3G) bought in Australia. I need to reset to stock firmware which is unfortunately still 4.0.3 here in Australia.
Now I went onto sammobile and entered my model number, country and chose XSA.
It comes up with:
Model: GT-P5100
Country: Australia
Version: Android 4.0.4
Product Code: XSA
PDA: P5100XWALE3
CSC: P5100XSAALE1
MODEM: P5100XXLD7
All this data is correct except for the Android version. My tablet came with 4.0.3 and not 4.0.4.
Anyway, I downloaded the file, but when opening it, I can't find the modem file at all. It only has the MD5 file. So how do I go about unrooting and bringing it back to stock again without having the modem file?
Any tips would be greatly appreciated
Just wanted to let you know that JellyBean 4.3 is finally available for the i9506 with Telekom branding. I have not received any notification but when you manually perform a software update check in your device settings the ~720MB download will start.
For all of you who want to flash it via odin etc. here is the download link:
http://terafile.co/855f236c6852/I9506XXUBNA2_I9506DTMBNA1_DTM.zip
Here is some additional info I forgot to post:
Product Code: DTM
PDA: I9506XXUBNA2
CSC: I9506DTMBNA1
MODEM: I9506XXUBML2
Platform: Samsung Android
Selected port: COM6
Selected model: SM-G930F
Reading info, please wait...
Detected phone model: SM-G930F
Firmware compiled date: Mon Jan 15 17:03:31 KST 2018
PDA version: G930FXXS2DRA9
CSC version: G930FXEF1DQJ1
SW version: G930FXXU2DRA9
Phone SN: R58H61FZEFE
Android version: 7.0 (NRD90M)
Sales code: XEF
Country: France
HW platform: exynos5
HW Chip: exynos8890
HW Modem: SHANNON335
Security patch level: 2018-01-01
SIM 1 status: ready
Codename: heroltexx
I tried everything flash COMBINATION_FA60_G930FXXU2ARA2 and network repair and write cert but when i flash the original stock firmware the network remains nothing
I can't do network repair and write cert on version 7 and i can't downgrade to version 6 cause bootloader !!!!
Has the phone's imei been blacklisted in some way?
I checked it and it’s not
Seems you cant flash an older firmware. Grab the very latest firmware (even if its not your csc) and flash that.
I found this the hard way
instrumentaly said:
Platform: Samsung Android
Selected port: COM6
Selected model: SM-G930F
Reading info, please wait...
Detected phone model: SM-G930F
Firmware compiled date: Mon Jan 15 17:03:31 KST 2018
PDA version: G930FXXS2DRA9
CSC version: G930FXEF1DQJ1
SW version: G930FXXU2DRA9
Phone SN: R58H61FZEFE
Android version: 7.0 (NRD90M)
Sales code: XEF
Country: France
HW platform: exynos5
HW Chip: exynos8890
HW Modem: SHANNON335
Security patch level: 2018-01-01
SIM 1 status: ready
Codename: heroltexx
I tried everything flash COMBINATION_FA60_G930FXXU2ARA2 and network repair and write cert but when i flash the original stock firmware the network remains nothing
I can't do network repair and write cert on version 7 and i can't downgrade to version 6 cause bootloader !!!!
Click to expand...
Click to collapse
plz try flashing this firmware and write pB6.tar modem then patch certificate https://www.sammobile.com/firmwares/galaxy-s7/SM-G930F/ALE/download/G930FXXU1DQHD/207465/
sharufi said:
plz try flashing this firmware and patch certificate https://www.sammobile.com/firmwares/galaxy-s7/SM-G930F/ALE/download/G930FXXU1DQHD/207465/
Click to expand...
Click to collapse
lol check log b4 answer i'm using U2 and u sent me link for U1 rom how i can downgrade !!!!!
instrumentaly said:
lol check log b4 answer i'm using U2 and u sent me link for U1 rom how i can downgrade !!!!!
Click to expand...
Click to collapse
its new build, 2018-02-18, it should work
sharufi said:
plz try flashing this firmware and write pB6.tar modem then patch certificate https://www.sammobile.com/firmwares/galaxy-s7/SM-G930F/ALE/download/G930FXXU1DQHD/207465/
Click to expand...
Click to collapse
how can I patch the certificate? I have the same problem
Atoriki92 said:
how can I patch the certificate? I have the same problem
Click to expand...
Click to collapse
could you flash the rom having binary 2 installed ?
instrumentaly said:
Platform: Samsung Android
Selected port: COM6
Selected model: SM-G930F
Reading info, please wait...
Detected phone model: SM-G930F
Firmware compiled date: Mon Jan 15 17:03:31 KST 2018
PDA version: G930FXXS2DRA9
CSC version: G930FXEF1DQJ1
SW version: G930FXXU2DRA9
Phone SN: R58H61FZEFE
Android version: 7.0 (NRD90M)
Sales code: XEF
Country: France
HW platform: exynos5
HW Chip: exynos8890
HW Modem: SHANNON335
Security patch level: 2018-01-01
SIM 1 status: ready
Codename: heroltexx
I tried everything flash COMBINATION_FA60_G930FXXU2ARA2 and network repair and write cert but when i flash the original stock firmware the network remains nothing
I can't do network repair and write cert on version 7 and i can't downgrade to version 6 cause bootloader !!!!
Click to expand...
Click to collapse
Same problem for me with my G935F, have you found solution?
---------- Post added at 01:36 AM ---------- Previous post was at 01:34 AM ----------
Same problem for my, on G935F. Have you found solution to fix it?
instrumentaly said:
Platform: Samsung Android
Selected port: COM6
Selected model: SM-G930F
Reading info, please wait...
Detected phone model: SM-G930F
Firmware compiled date: Mon Jan 15 17:03:31 KST 2018
PDA version: G930FXXS2DRA9
CSC version: G930FXEF1DQJ1
SW version: G930FXXU2DRA9
Phone SN: R58H61FZEFE
Android version: 7.0 (NRD90M)
Sales code: XEF
Country: France
HW platform: exynos5
HW Chip: exynos8890
HW Modem: SHANNON335
Security patch level: 2018-01-01
SIM 1 status: ready
Codename: heroltexx
I tried everything flash COMBINATION_FA60_G930FXXU2ARA2 and network repair and write cert but when i flash the original stock firmware the network remains nothing
I can't do network repair and write cert on version 7 and i can't downgrade to version 6 cause bootloader !!!!
Click to expand...
Click to collapse
Based on the information i can see available to me your PDA, BL and CP version are all AP SWREV B:2 whereas your CSC is using AP SWREV B:1, you will not be able to connect to any network whilst your CSC is set to B1, you need to download a full firmware package that contains all AP SWREV B:2 if your in australia or uk the new 8.0 oreo firmware is out on sammobile its for the uk but the network functions on all australian carriers this should fix your issue also go to the dialer and enter *#0011# is thr screen blank or filled with information if blank you are experiencing a certificate error or imei issue if it displays text when entered change the modem to AP SWREV B:2 firmware please feel free to private message me if you still need some help.
also quick questoin the combination FA_60_G930FXXU2ARA2 rom you flashed to the device did it actually boot ? As i have a G930F with knox tripped and for some reason the exact same combination rom will not boot at all on my device i get nad passed and provisioned and the blue status light but will not go any further and once restarted i get a console error.
Thanks
Matthew
mofazar said:
Same problem for me with my G935F, have you found solution?
---------- Post added at 01:36 AM ---------- Previous post was at 01:34 AM ----------
Same problem for my, on G935F. Have you found solution to fix it?
Click to expand...
Click to collapse
Just flash with this version
Sammobile 7.0 INS
your baseband version also repaird
then root
Then repair imei on Z3x (only orignal)
And then patch certificate
thats it....
Sorry for my bad English...
Hers the log..
Operation: Patch Certificate
Selected model: SM-G930F
Software version: 32.4
Waiting ADB device... OK
Reading phone info...
Model: SM-G930F
Android version: 7.0
PDA version: G930FXXS2DRCG
CSC version: G930FODD2DRAG
Phone version: G930FXXU2DRAG
Product code: SM-G930FZSUINS
CSC country code: India
CSC sales code: INS
Phone SN: RZ8J90V9S9B
IMEI: 358688xxxxxxxx8
HW version: MP 0.700
RF cal date: 20170909
Chip name: EXYNOS8890
Modem board: SHANNON335
Security patch: 2018-03-01
Boot Warranty bit: 1
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Writing zTool... OK
Initialization zTool... OK
Rebooting phone... OK
Patching CERT check... done
Done with Samsung Tool PRO v.32.4
So, I've been having this problem. I want to hard reset my phone but I can't as "Volume UP + Home + Power" doesn't work (broken as I failed to flash TWRP) nor the reset in the settings of the phone. I've decided to use Odin but I can't find my type of stock firmware except one which is downloading right now and says there's 9 hours left. Could you help me by putting a link to my phone's stock firmware? Phone details are here:
Region: MM1
Model: SM-N9005
PDA: N9005DXSGBQA1
CSC: N9005DXUGBOK3
(Or was it N9005OLBGBOK3? Try seeing if the CSC above is there.)
OS: 5.0 Lollipop
Thanks in advance!
EDIT: I soft-bricked my Android, now I'm going to need the firmware for my device...
FYI.
https://www.sammobile.com/firmwares/galaxy-note3/SM-N9005/
Would you please help me download that file and send it to me on a website that doesn't take a whole day to download? (MEGA, FILEDROPPER) etc. I don't have enough time on my hands...
Also, I put the wrong details for my phone.
PDA: N9005DXSGBQA1
CSC: N9005DXUGBOK3
(I think it's N9005OLBGBOK3 not N9005DXUGBOK3)
Thank you very much!
I'll be keeping in touch with this thread for a couple days.