Database Info

Directly booting to recovery

I have a rooted S-7500, with CWM recovery 5.0.2.8 installed. I (by mistake) allowed the 'software update' option to install a system update(or something) today by mistake (I know, you should never install system updates after rooting. My bad.) Since then, the phone directly goes to the cwm recovery mode on powering on, and i am unable to do anything else
I am not very well versed with the finer details of rooting bootloader recovery n all...so pls some details with steps...if possible .
Any help whatsoever...please I will be really grateful

You have to flash back STOCK rom on your device now...
here is complete guide for how to do & download links...
[GUIDE] Unroot / Unbrick, Flash official stock firmware on galaxy ace plus GT-S7500
thread by @samersh72 simple one & easy to understand everyone
Download stock rom depends on your country
Follow guide
I'm sure you will resolve issue soon
Noworry its just minor problem happens while you dealing with android system ​

j.posarekar70 said:
You have to flash back STOCK rom on your device now...
here is complete guide for how to do & download links...
[GUIDE] Unroot / Unbrick, Flash official stock firmware on galaxy ace plus GT-S7500
thread by @samersh72 simple one & easy to understand everyone
Download stock rom depends on your country
Follow guide
I'm sure you will resolve issue soon
Noworry its just minor problem happens while you dealing with android system ​
Click to expand...
Click to collapse
Thanks!!! It totally worked!
Just a clarification...now that i have got the stock rom back on my phone...am i right in saying that I have lost root access, my phone is totally back to the 'original' state, and i have lost CWM as well? Please correct me if I am wrong.
And assuming that I am correct(above), I would like to re-root my device(need to use proxydroid to surf internet over the damned proxy server!). So..can I follow the standard method, ie, can I do it the same way I had done before, or do i need to do something different now?
And once again...THANK YOU for your help! I had ended up hard bricking my previous phone, and was really scared when this happend to my aceP. You saved me!

Easy way to ROOT your SGAP
Yes by the time you flash stock rom you loss root even any custom recovery you flashed before...
but now if you want to root your SGAP again don't follow that guide again which you done before just follow this :
Download ODIN from Downloading link below (inside ODIN software folder)
Download any one recovery which you like TWRAP / CWM v5.5 (inside Custom recovery folder)
Download Root_SGAP.zip from Root folder & place that zip inside in your sd card
Click to expand...
Click to collapse
Download Link : GALAXY Ace Plus - Basic stuff
FOR Custom_Recovery :
Open odin, be sure your system has already install drivers & if kies is there close it.
extract recovery zip
connect device to pc in download mod (vol down + power + home) & select that (recovery) .md5 file in pda section inside ODIN software
Click start & wait to reboot device
FOR ROOT :
Now boot device in CWM mod ( vol up + down + power + home)
choose zip from sd card & select Root_SGAP.zip
DONE.
Click to expand...
Click to collapse
you've successfully ROOT & flash custom recovery on your device by just few simple steps ​

Just 1 more qstn...is it necessary to apply a custom recovery before rooting? If no, is it recommended?? Because the last time i rooted, it made me put a custom recovery before rooting.

dubey.arpit said:
Just 1 more qstn...is it necessary to apply a custom recovery before rooting? If no, is it recommended?? Because the last time i rooted, it made me put a custom recovery before rooting.
Click to expand...
Click to collapse
if you are going to stick on stock rom forever & only want to root device then stock recovery is ok for you...
but while dealing with custom roms, custom recoveries are smart choice.
it has lot of additional options than stock recovery.
so my opinion yes use custom recovery ​

Stuck in boot loop
Got stuck in boot loop after performing the steps. I was running this ROM.
Had to reinstall the ROM. I'm sure there's something I didn't understand or something I did wrong. I'd be thankful if anyone could point it out.
Thanks in advance.

Snowflakes91 said:
Got stuck in boot loop after performing the steps. I was running this ROM.
Had to reinstall the ROM. I'm sure there's something I didn't understand or something I did wrong. I'd be thankful if anyone could point it out.
Thanks in advance.
Click to expand...
Click to collapse
Check my guide on how to fix a bootloop in my sig

Question About Flashing A Stock ROM
Hi! I had the same problem, and I flashed stock ROM! Now is all Ok, but my phone is not rooted. I want to try it again! But I am scared! What if I again stuck in CWM Boot Loop? Is it possible to that happen again?
And should I install different version of CWM to fix it?
Please help me!
I am NEW here!
Thank you very much in advance,
David Boca

cwm fixed
davidboca2000 said:
Hi! I had the same problem, and I flashed stock ROM! Now is all Ok, but my phone is not rooted. I want to try it again! But I am scared! What if I again stuck in CWM Boot Loop? Is it possible to that happen again?
And should I install different version of CWM to fix it?
Please help me!
I am NEW here!
Thank you very much in advance,
David Boca
Click to expand...
Click to collapse
The new cwm by mb-14 is fixed and there are no more bootloops​

Reply
bibhu60 said:
The new cwm by the wisp is fixed and there are no more bootloops​
Click to expand...
Click to collapse
Can you please give me the Link to the Xda Developers page with it? Many Thanks in advance!

Here it is..
davidboca2000 said:
Can you please give me the Link to the Xda Developers page with it? Many Thanks in advance!
Click to expand...
Click to collapse
CWM 5.5.0.4 BY mb-14
I am also using this recovery from months i have flashed many roms and mods but it does not have any bugs.
Working perfectly...
Hit thanks if I helped You don't say it...
​

thanks
thanks for help

[Q] (Q) ¿Error al entrar en CWM?

Hello friends, I am newbie in android something I wanted to install CWM 6.0.4.5 of this tutorial http://forum.xda-developers.com/showthread.php?t=2560928 and everything goes perfectly, but when squeezed keys + volume, power and home the ANDROID SYSTEM RECOVERY 3E shows me instead of CWM 6.0.4.5 and enter CWM have to do to step 4 with odin and remove the battery etc. .. and I can get! but only this time, after I turn it and attempt to re-enter but it appears the android system recovery 3e. Please help, I do not want this whole process to remove the battery to get. Thank you!

hi @matutecarp99
you have to flash this file called cwm-permanentor.zip with CWM to prevent the Stock ROM to flash it's own recovery over CWM
Warning : flashing cwm-permanentor.zip makes your device status custom.
you can find cwm-permanentor.zip here http://forum.xda-developers.com/showthread.php?t=2303395
find it in section B)Rooting it's one of those 2 links.
there is other solutions for this, mentioned in tutorial in your link, but this method i said worked for me.

matutecarp99 said:
Hello friends, I am newbie in android something I wanted to install CWM 6.0.4.5 of this tutorial http://forum.xda-developers.com/showthread.php?t=2560928 and everything goes perfectly, but when squeezed keys + volume, power and home the ANDROID SYSTEM RECOVERY 3E shows me instead of CWM 6.0.4.5 and enter CWM have to do to step 4 with odin and remove the battery etc. .. and I can get! but only this time, after I turn it and attempt to re-enter but it appears the android system recovery 3e. Please help, I do not want this whole process to remove the battery to get. Thank you!
Click to expand...
Click to collapse
It's because the firmware overwrite cwm with stock recovery, you must root it or directly flash custom ROM. Or use the trick from the first replier.
Sent from my GT-I9082 using Tapatalk

CWM
vahid8910 said:
hi @matutecarp99
you have to flash this file called cwm-permanentor.zip with CWM to prevent the Stock ROM to flash it's own recovery over CWM
Warning : flashing cwm-permanentor.zip makes your device status custom.
you can find cwm-permanentor.zip here http://forum.xda-developers.com/showthread.php?t=2303395
find it in section B)Rooting it's one of those 2 links.
there is other solutions for this, mentioned in tutorial in your link, but this method i said worked for me.
Click to expand...
Click to collapse
Thanks for responding! I have android 4.2.2 and my version of CWM is 6.0.4.5 this tutorial you sent me is for android 4.1 and the version of CWM "cwm-permanentor.zip" which is not .. I hope I help a friend!
No if you can help me with this, but never flashee one custom rom, I wanted to know if I could help install one with all precautions and detail because it's my first time .. ONLY IF POSSIBLE
I have the GT-I9105P with root and xposed and mods and tweaks. Thanks in advance!

that cwm-permanentor.zip worked for me on 4.2.2.
but you better make sure.

CWM
vahid8910 said:
that cwm-permanentor.zip worked for me on 4.2.2.
but you better make sure.
Click to expand...
Click to collapse
Risk of brick? or something similar? I have to flash with CWM?

matutecarp99 said:
Risk of brick? or something similar? I have to flash with CWM?
Click to expand...
Click to collapse
install it with CWM,
idk about brick, mine didn't brick.

CWM
I'm done updating my CWM to v6.0.4.5 right now... and it works perfectly
..
From Samsung S2+ (I9105P rooted ) running on CWM v6.0.4.5 android 4.2.2

CWM
vahid8910 said:
install it with CWM,
idk about brick, mine didn't brick.
Click to expand...
Click to collapse
Well now I install it with CWM and tell them how I was. I hope everything goes well, if something goes wrong not help me? I am very nervous, I'm not used to do this

CWM
matutecarp99 said:
Well now I install it with CWM and tell them how I was. I hope everything goes well, if something goes wrong not help me? I am very nervous, I'm not used to do this
Click to expand...
Click to collapse
Used Odin v3.07 I'm already update my CWM v6.0.4.5 before it was CWM v6.0.3.5
And now I'm ready to Flash cyanogenmod CM-11 Kitkat 4.4.2

CWM
vahid8910 said:
install it with CWM,
idk about brick, mine didn't brick.
Click to expand...
Click to collapse
You install it and always comes into CWM now thank you very much to all!
Could pass me the link of the tutorial to install android 4.4.2 rom kitkat? YOU!

Cyanogenmod 11
Elucidator21 said:
Used Odin v3.07 I'm already update my CWM v6.0.4.5 before it was CWM v6.0.3.5
And now I'm ready to Flash cyanogenmod CM-11 Kitkat 4.4.2
Click to expand...
Click to collapse
You Might Pass the link CM11 kitkat 4.4.2? Finish Install CWM UN while ago! : D
And tell me What son of ESA rom errors

@matutecarp99
http://forum.xda-developers.com/showthread.php?t=2568665
Don't forget to make a backup with CWM before flashing CM-11.

CWM
vahid8910 said:
@matutecarp99
http://forum.xda-developers.com/showthread.php?t=2568665
Don't forget to make a backup with CWM before flashing CM-11.
Click to expand...
Click to collapse
Sorry friend, but never ever flashe rom, as is done already, but I never did and do not know how the backup is done, explain me please? And also how is restored .. thanks

matutecarp99 said:
Sorry friend, but never ever flashe rom, as is done already, but I never did and do not know how the backup is done, explain me please? And also how is restored .. thanks
Click to expand...
Click to collapse
you can see back up and restore in CWM.
actually backup is not necessary i suggested it because it's good to have a back up of stock rom, so whenever anything goes wrong you can restore your phone as it was.

vahid8910 said:
you can see back up and restore in CWM.
actually backup is not necessary i suggested it because it's good to have a back up of stock rom, so whenever anything goes wrong you can restore your phone as it was.
Click to expand...
Click to collapse
As it is my first time to install a custom rom will do the backup!
Xq says build 2 build 1 etc. .. not that is!, are updates rom? And I wanted you to tell me what are the BUGS this rom
USB works? etc. ..
Ahh DOWNLOADS and above in the tutorial there are patches if I'm not mistaken, that is? I am VERY BASIC IN ANDROID APOLOGY
I am from Argentina speak non-English, use google translator xD!

matutecarp99 said:
As it is my first time to install a custom rom will do the backup!
Xq says build 2 build 1 etc. .. not that is!, are updates rom? And I wanted you to tell me what are the BUGS this rom
USB works? etc. ..
Ahh DOWNLOADS and above in the tutorial there are patches if I'm not mistaken, that is? I am VERY BASIC IN ANDROID APOLOGY
I am from Argentina speak non-English, use google translator xD!
Click to expand...
Click to collapse
Like vahid8910 said, you need to back up your device thru CWM.. did u back up your device? theres a lot of back up tutorial on youtube try to
watch 1st before flashing Cyanogenmod CM11..
You need Only the Build #5 and download Gapps... here's the link... CM11 and GApps http://wiki.cyanogenmod.org/w/Google_Apps

Cyanogenmod 11
Elucidator21 said:
Like vahid8910 said, you need to back up your device thru CWM.. did u back up your device? theres a lot of back up tutorial on youtube try to
watch 1st before flashing Cyanogenmod CM11..
You need Only the Build #5 and download Gapps... here's the link... CM11 and GooleApps http://wiki.cyanogenmod.org/w/Google_Apps
Click to expand...
Click to collapse
I already have backup done, I have "gapps-20140105-signed.zip-kk" 83.1 MB and "cm-11-20140121-UNOFFICIAL-s2vep.zip" 196 MB internal memory and external SD (I have them in the 2 memories just in case) now I have to flash. 1 -. CM11 In CWM select install if and same with gapps and reboot system now? No need to do anything WIPES dalvin cache etc. .. please explain it step by step I would not bricking THANKS
PD: I have root, I have seeder (tweak) a few mods and xposed. Also I mount folder (to passing games to external sd)
It should be checked usb debugging? And where I have to leave the backup made​​?
What are the bugs? I'll be able to reinstall xposed? Also change the DPI of 240-210
ALL THAT I MADE MY GALAXY S2 PLUS (I9105P)

you need to wipe it 1st before flashing CM11 and Gapps...

Cyanogenmod 11
Elucidator21 said:
you need to wipe it 1st before flashing CM11 and Gapps...
Click to expand...
Click to collapse
I tell you the steps you do and tell me if I do something wrong:
1.-Wipe data factory reset
2.-Wipe cache partition
3.-Install zip from sd card, CM11
4.-Install zip from sd card, GAPPS
5.-Reboot system now
If you do these step Ships all well? THANKS

[Q] Help Me Please...My device is dead

So my Samsung Tab 2 is rooted and i tried downloading Nightlies and after downloading i went into CWM and
1.factory reset
2.wipe dalvik
3.then went on to flash the latest Nightlies
and then it shows error and got dead
now i cant do anything the tablet is dead and doesnt start also
only i can goto CWM mode but that doesnt help
Help me guys am stuck for a long time please help:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:

TheAndroidNinja said:
So my Samsung Tab 2 is rooted and i tried downloading Nightlies and after downloading i went into CWM and
1.factory reset
2.wipe dalvik
3.then went on to flash the latest Nightlies
and then it shows error and got dead
now i cant do anything the tablet is dead and doesnt start also
only i can goto CWM mode but that doesnt help
Help me guys am stuck for a long time please help:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
If you can get into CWM can't you flash a different recovery, maybe TWRP, then flash a good ROM? I'm a fan of the OMNIROM Kit Kat 4.4.2, but there's lots to choose from.
I had trouble installing ROMs from CWM, but all that resolved with TWRP. I used 2.7.0.1 of TWRP, by the way.
Good luck, and report back.
Marc

Update to latest twrp (I prefer philz advanced recovery, myself) and try flashing again.
Oh, and if possible use a different ROM file as your download may have been corrupted.
Sent from my SGH-T999 using Tapatalk

Frankenscript said:
If you can get into CWM can't you flash a different recovery, maybe TWRP, then flash a good ROM? I'm a fan of the OMNIROM Kit Kat 4.4.2, but there's lots to choose from.
I had trouble installing ROMs from CWM, but all that resolved with TWRP. I used 2.7.0.1 of TWRP, by the way.
Good luck, and report back.
Marc
Click to expand...
Click to collapse
Really thanx for replying and taking time in my problem
but I dont have TWRP installed
My tab2 is rooted and CWM is installed nothing else
https://www.youtube.com/watch?v=o3DBVWamJgk--i used this method to rrot my device
Please reply it would bee really helpful for me
Please Thanx for taking time,big help

TheAndroidNinja said:
Really thanx for replying and taking time in my problem
but I dont have TWRP installed
My tab2 is rooted and CWM is installed nothing else
https://www.youtube.com/watch?v=o3DBVWamJgk--i used this method to rrot my device
Please reply it would bee really helpful for me
Please Thanx for taking time,big help
Click to expand...
Click to collapse
Just download latest TWRP from Android Andi here http://forum.xda-developers.com/showpost.php?p=47970089 flash it thru your CWM, reboot into your new recovery, wipe system and flash a different ROM. Make sure you re-download whatever ROM you are going to use because as previously stated you may have gotten a bad download.

tokenpoke said:
Update to latest twrp (I prefer philz advanced recovery, myself) and try flashing again.
Oh, and if possible use a different ROM file as your download may have been corrupted.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Really thanx for replying and taking time in my problem
but I dont have TWRP installed
My tab2 is rooted and CWM is installed nothing else
https://www.youtube.com/watch?v=o3DBVWamJgk--i used this method to rrot my device
Please reply it would bee really helpful for me
Please Thanx for taking time,big help
and i downloade 2-3 downloads its saying the same
please try to find me a soulution
Thanx

TheAndroidNinja said:
Really thanx for replying and taking time in my problem
but I dont have TWRP installed
My tab2 is rooted and CWM is installed nothing else
https://www.youtube.com/watch?v=o3DBVWamJgk--i used this method to rrot my device
Please reply it would bee really helpful for me
Please Thanx for taking time,big help
and i downloade 2-3 downloads its saying the same
please try to find me a soulution
Thanx
Click to expand...
Click to collapse
Read my last post. Use a different ROM then. There are plenty to choose from.

To be clear what you need to do is use the CWM you have to install A DIFFERENT recovery, one more compatible with a lot of the current custom ROMs. I have used TWRP so for example:
1. Boot to CWM with TWRP package on your microSD
2. Flash TWRP
3. Reboot into recovery... CWM will be gone and you will have TWRP instead
4. In Twrp Wipe caches and format system
5. Still In Twrp, Flash ROM of your choice from ROM downloaded onto your microsd
6. Reboot system and give it time.
Let us know how it goes!

Thank you everyone
Thank You Thanx a lot for helping me guys
I downloaded TWRP n then downloaded the latest version of OMNI Rom and it worked
Thnak u soo much guys
CWM n Cyanagonemod has a lot of bugs and is really ****

CSP III said:
Just download latest TWRP from Android Andi here http://forum.xda-developers.com/showpost.php?p=47970089 flash it thru your CWM, reboot into your new recovery, wipe system and flash a different ROM. Make sure you re-download whatever ROM you are going to use because as previously stated you may have gotten a bad download.
Click to expand...
Click to collapse
Hey after i installed Omnirom i think i lost my Root Access
cz Xposed doesnt start anymore and and not any other also
help me please

Glad you got your system to boot omnirom! You may need to re root the device... Others here can help you get that done, as I'm no expert.

TheAndroidNinja said:
Hey after i installed Omnirom i think i lost my Root Access
cz Xposed doesnt start anymore and and not any other also
help me please
Click to expand...
Click to collapse
Go here http://forum.xda-developers.com/showthread.php?t=2535083and use the Philz recovery link for your device. Once finished you can reflash your existing TWRP zip you used earlier to regain TWRP recovery if thats what you want. Or you can just leave as is and have Philz recovery as that is a very good one as well. Your choice.
You could also use the SuperSu link from here http://download.chainfire.eu/supersu and just flash that. I believe that will work just the same. I havent, but have heard it works as well

Thanx
CSP III said:
Go here http://forum.xda-developers.com/showthread.php?t=2535083and use the Philz recovery link for your device. Once finished you can reflash your existing TWRP zip you used earlier to regain TWRP recovery if thats what you want. Or you can just leave as is and have Philz recovery as that is a very good one as well. Your choice.
You could also use the SuperSu link from here http://download.chainfire.eu/supersu and just flash that. I believe that will work just the same. I havent, but have heard it works as well
Click to expand...
Click to collapse
Just flashed Supersu and it worked thanx a lot guys

[Q&A] [WIP] [ROM] [Dirty Developers] [4.4.4] CM11

Q&A for [WIP] [ROM] [Dirty Developers] [4.4.4] CM11
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [WIP] [ROM] [Dirty Developers] [4.4.4] CM11. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

hey i have a problem with this rom
hey i have a problem with this rom
it's my first time to rom my mobile
it's steps what i do
1- clockworkmod recovery 6.0.3 for samsung galaxy ace plus
2- Rooted my mobile and got a Supersu app after restart mobile
3- put rom file .zip in my sd and shutdown my mobile
4- i go in recovery and Wipe your data/cache, including the Dalvik Cache.
5 - when i try to setup the rom i got " status 7 install aborted "

Good evening,
Well,
Not needed root!
1. If i don't have any recovery, flash clockworkmemory or twrp! In my opinion is better twrp
2. Copy .zip into your sd card
3. Reboot into recovery
4. Wipe data, cache, dalvik e system! Remember, is very important wipe System for an clean installation
5. Flash zip from sd-card
6. Reboot

here you go buddy
http://forum.xda-developers.com/gal...de-how-to-make-version-flashable-via-t2958667

What about android lollipop ?

Facing bugs after installation of Cynogenmod 11 in S7500
Hi,
There is some problem to be highlighted after installation of cynogenmod11 OS in Samsung GT-S7500 model.
Request you ton please fix this issues in upcoming updates.
1) Restart the Mobile after 4-5 Hrs duration.
2) Restart the Mobile after disconnecting USB from PC.
3) Sometime mobile are totally hang during using of application like Whatapp, Hike, Facebook messenger etc.
4) Video recording not working.
5) Camera pic quality is poor.
6) Battery draining faster.

GPS seems to not working. (dirtydev cm11)
Hi.
I try to explain with a few words.
I can't localize my position with GPS.
I tried Sygic, (new and old versions), Copilot. I activated only the gps of the device. But it never finds my position.
Have you got the same problem?
PS: sorry for bad english.

sd swap
hi first can i say a big thanx for all the hard work you do. so far im trying to decide if speed mod or this rom is the best. i prefer all the things on this 1 but only thing making me favour speed mod is the option to use external has primary. ive tried all the different options i read on how to swap on cm11 but none seem to work for me, if thi option was available this rom would be the best by far

guys can i flash this on my GT-S7500T ??!!!
I afraid that I will get a BRICKED phone!
pls help me what should i do?!
any one tested this before?!!
Im still on 2.3.6

Happy valentine guys
any suggestion for my problem?!
some one help me pls.
I afraid that I will get a BRICKED phone!
But I need android 4 version

i would like to know which CWM or TWRP to use to flash this rom?
and please be humble to share the link as well.
sorry i must have failed to see if it was mentioned somewhere.
thanks in advance

Problem with CM11
When I flash CM I get the following:
assert failed: getprop("ro.product.device") == "trebon: || getprop ("ro.product.device") =="trebon"
Click to expand...
Click to collapse
I'm lazy to mention all but in the end it writes: GT-S7500 two times and
Error in cm-11-20150113-DirtyDev-trebon.zip
Status 7
Installation aborted.
Please help me

ariton1 said:
When I flash CM I get the following:
I'm lazy to mention all but in the end it writes: GT-S7500 two times and
Error in cm-11-20150113-DirtyDev-trebon.zip
Status 7
Installation aborted.
Please help me
Click to expand...
Click to collapse
When you have downloaded the zip, have you unzip and edited it? Or have directly flashed the zip?
Anyway, is strange or is a recovery's problem or you have edited the zip in some way
vksberi said:
i would like to know which CWM or TWRP to use to flash this rom?
and please be humble to share the link as well.
sorry i must have failed to see if it was mentioned somewhere.
thanks in advance
Click to expand...
Click to collapse
Both recovery should be ok!
ticoo said:
guys can i flash this on my GT-S7500T ??!!!
I afraid that I will get a BRICKED phone!
pls help me what should i do?!
any one tested this before?!!
Im still on 2.3.6
Click to expand...
Click to collapse
I have not idea, you should try!
I'm not sure, but if you'll brick the phone you can restore with re-flashing the stock rom

WebKit Lag
How much longer will it be till the WebKit lag is fixed? It's really "bugging" me off c:
10/10 best pun 2015

please help guys i have no recovery or factory reset
Hi thanx for all your time and effort you put into roms. I have been using cm11 for few weeks but all of a sudden i cant enter recovery or do factory reset I've tried hard reset I've tried factory reset option but nothing works. My phone tries to enter recovery because screen flashes then stays blank but i can enter download mode. I was going to try Odin but im worried has i have no nandroid back up. Please help guys if anyone has a answer for this i will be very grateful. My phone has been working great up until now
Many thanx you guys are the best

please add step-by-step how to install this rom

Problem in installing this ROM
I am getting error in Recovery that "this ROM is for GT - S7500 and your device is GTS7500".(Error status 7) What should I do now?

DevMeena401 said:
I am getting error in Recovery that "this ROM is for GT - S7500 and your device is GTS7500".(Error status 7) What should I do now?
Click to expand...
Click to collapse
Probably you are trying to flash the rom with CWM you must change the recovery, flash TWRP 2.5.0.0 with odin

zyxw-androidiani said:
Probably you are trying to flash the rom with CWM you must change the recovery, flash TWRP 2.5.0.0 with odin
Click to expand...
Click to collapse
Tried but in TWRP it is just skipping MD5 sum and said process complete but inside the phone nothing changed. I don't know what to do, in TWRP I am unable to locate my old back up while in CMW it is not allowing me to go back using same back giving me error of MD5 sum.

DevMeena401 said:
Tried but in TWRP it is just skipping MD5 sum and said process complete but inside the phone nothing changed. I don't know what to do, in TWRP I am unable to locate my old back up while in CMW it is not allowing me to go back using same back giving me error of MD5 sum.
Click to expand...
Click to collapse
Which rom already have you ?

Marshmallow on Nexus 4

Hello! I have watched your Youtube video Of Marshmallow running on Nexus 4. I want some assistance from your side. I have a rooted Nexus 4 and I also want to install Marshmallow on my nexus 4. I have downloaded the Frank N4 rom and the google apps as provided from the link in your video description. Both are zip files of 201Mb and 199 Mb respectively. So how can I install that rom and Gapps? Please help. I have copied both the zip files to my Phone. 
Can I now turn my phone in to recovery mode and then flash the rom and then Gapps?
Or what is the recommended way? Please help me.

RehanEmoPunk said:
Hello! I have watched your Youtube video Of Marshmallow running on Nexus 4. I want some assistance from your side. I have a rooted Nexus 4 and I also want to install Marshmallow on my nexus 4. I have downloaded the Frank N4 rom and the google apps as provided from the link in your video description. Both are zip files of 201Mb and 199 Mb respectively. So how can I install that rom and Gapps? Please help. I have copied both the zip files to my Phone. 
Can I now turn my phone in to recovery mode and then flash the rom and then Gapps?
Or what is the recommended way? Please help me.
Click to expand...
Click to collapse
1. put on twrp recovery, if you dont already have it
2. boot into recovery
3. wipe data, cache, and dalvic cache in advanced wiping options (note all data, pics etc will be lost)
4. install rom and gapps using the install tab
5. reboot

bweN diorD said:
1. put on twrp recovery, if you dont already have it
2. boot into recovery
3. wipe data, cache, and dalvic cache in advanced wiping options (note all data, pics etc will be lost)
4. install rom and gapps using the install tab
5. reboot
Click to expand...
Click to collapse
How to put on TWRP recovery?

Well you can put TWRP recovery from fastboot mode or try an app called flaahify to install TWRP

droid_god said:
Well you can put TWRP recovery from fastboot mode or try an app called flaahify to install TWRP
Click to expand...
Click to collapse
In the flashify app there is an option to download TWRP? Should I download it from there?
There are various versions also and 2.8.7.0 us the latest one?. Should I download the latest one?

I just have to copy the TWRP 2.8.7.0 in my phone's storage?

And now flaah it using flaahify

RehanEmoPunk said:
I just have to copy the TWRP 2.8.7.0 in my phone's storage?
Click to expand...
Click to collapse
i dont use flashify, but i think you just pick the one you want, then click install.
if you want more clarification on how to install it properly, im sure there is a twrp thread in the n4 forum which will provide instructions to install it.

I have copied the frank-mako rom(201mb) and Banks-Gapps6(199mb) zip files in my nexus 4 along with the TWRP-2.8.7.0-Mako.img(8.82mb).
Now what steps should I take to update my Nexus 4 to Marshmallow? Please help me. Thanks in Advance

Go on to flaah recovery and then clean flash rom and reboot. After reboot dont do anything just switch off and boot onto recovery and flaah gapps and then do a normal bootto use rom and enjoy.

RehanEmoPunk said:
I have copied the frank-mako rom(201mb) and Banks-Gapps6(199mb) zip files in my nexus 4 along with the TWRP-2.8.7.0-Mako.img(8.82mb).
Now what steps should I take to update my Nexus 4 to Marshmallow? Please help me. Thanks in Advance
Click to expand...
Click to collapse
we have been helping you, but if you have the twrp img on the phone and didnt install it already, you are not listening.
good luck with getting it setup, i for 1 will not continue to help when you dont or cant follow direction.

Spend a few days researching before you end up with a brick. This is not a support site.

bweN diorD said:
we have been helping you, but if you have the twrp img on the phone and didnt install it already, you are not listening.
good luck with getting it setup, i for 1 will not continue to help when you dont or cant follow direction.
Click to expand...
Click to collapse
Thanks alot ?

Can I install the frank-N4 Marshmallow rom through the Nexus Root Tool kit?

RehanEmoPunk said:
Can I install the frank-N4 Marshmallow rom through the Nexus Root Tool kit?
Click to expand...
Click to collapse
Well i dont know about that will work or not.
But the recovery will always work

RehanEmoPunk said:
Can I install the frank-N4 Marshmallow rom through the Nexus Root Tool kit?
Click to expand...
Click to collapse
Don't bother with root kits. They will lead you to nothing but trouble.

RehanEmoPunk said:
Can I install the frank-N4 Marshmallow rom through the Nexus Root Tool kit?
Click to expand...
Click to collapse
zelendel said:
Don't bother with root kits. They will lead you to nothing but trouble.
Click to expand...
Click to collapse
while i agree people need to learn how to do it the right way, i am well versed in adb and fastboot, but i have use wugs forever and never had an issue.
i have to believe most of the problems come from user error, which the same could be said for manual installs. wug makes a solid tool and has put a ridiculous amount of work into it.
however, im not sure if it can install a custom rom, regardless, if you cant flash a zip without a tool, you shouldnt be modding anything, i def agree with that