Related
I flashed my Xperia T (LT30P) today to a firmware version of ICS 4.0.4 after updating software the other day (5/31) to jellybean 4.1.2 Now, my phone isn't picking up data nor showing up as 4G LTE. The firmware I used was 7.0.A.1.303 Vodafone. I have tried a factory restore with no success. I live in America and the firmware was UK if that makes a difference. I visited at&t today to resolve the issue. They told me that the network is functioning fine and tried my sim card in a different phone, which worked fine. So, is there anything I can do? Thanks in advance for helping.
It does make a difference if you used UK firmware on an American phone. Since the UK communicates on a different frequency than the US, the two are not compatible. The only option would most likely be to reflash your phone using a different ROM, or flash it back to stock.
Hello guys,
Well I have the most indescifrable issue with my Moto g (xt1032).
It was aquired with kitkat, the day 5.0.1 GPE was released I installed it, making it a xt1033 GPE.
When Motorola´s 5.0.2 was released (brazilian) I downgraded to 4.4.4, and went ahead and installed moto´s 5.0.2 for the camera..
The next day, all was going ok, wifi, gps, moblie data etc.. not a single issue.... I had made calls, sent sms, etc... but around 12:00m (lunchtime) I saw "emergency callls only".... (I have not cutted the sim card to fit in the phone).
At that time, I swapped sims, (I´m on Claro colombia, I put a Virgin Mobile Sim..) and it worked again. I could call, send messages and stuff.
But yesterday That Virgin mobile sim stopped working, Now I face the following notification: Selected network (Claro) Unavailable.
I also get another notification about Resticted mode changed.
and yet another notification that says my sim card cannot be used to register on said network.
And another notification that says cannot send mms without registering something.
And another notiication about Voice service disabled...
this is driving me crazy....
The first thing I thought was of factory resetting the phone, to no luck, as my phone gets stuck at the red exclamation android and never goes to recovery.
I tried to install Phillz recovery but I get fastboot errors.
My phone is rooted btw, bootloader unlocked.
Is this my fault? as in I did a massive screw-up, or is it the software or is it a change on the provider´s end? I dont know.
What would you recommend doing at this point?
I have entered test mode and selected GSM only, but no luck.
Please, please shine a light on me, searching for no service and specific notification content only guides me to kit kat issues, which I really don't know are applicable to lollipop.
Mercí for your attention guys, have a good night.
donlloreda said:
Hello guys,
Well I have the most indescifrable issue with my Moto g (xt1032).
It was aquired with kitkat, the day 5.0.1 GPE was released I installed it, making it a xt1033 GPE.
When Motorola´s 5.0.2 was released (brazilian) I downgraded to 4.4.4, and went ahead and installed moto´s 5.0.2 for the camera..
The next day, all was going ok, wifi, gps, moblie data etc.. not a single issue.... I had made calls, sent sms, etc... but around 12:00m (lunchtime) I saw "emergency callls only".... (I have not cutted the sim card to fit in the phone).
At that time, I swapped sims, (I´m on Claro colombia, I put a Virgin Mobile Sim..) and it worked again. I could call, send messages and stuff.
But yesterday That Virgin mobile sim stopped working, Now I face the following notification: Selected network (Claro) Unavailable.
I also get another notification about Resticted mode changed.
and yet another notification that says my sim card cannot be used to register on said network.
And another notification that says cannot send mms without registering something.
And another notiication about Voice service disabled...
this is driving me crazy....
The first thing I thought was of factory resetting the phone, to no luck, as my phone gets stuck at the red exclamation android and never goes to recovery.
I tried to install Phillz recovery but I get fastboot errors.
My phone is rooted btw, bootloader unlocked.
Is this my fault? as in I did a massive screw-up, or is it the software or is it a change on the provider´s end? I dont know.
What would you recommend doing at this point?
I have entered test mode and selected GSM only, but no luck.
Please, please shine a light on me, searching for no service and specific notification content only guides me to kit kat issues, which I really don't know are applicable to lollipop.
Mercí for your attention guys, have a good night.
Click to expand...
Click to collapse
Flash the full XT1033 BR firmware by downloading the following mirror:
https://drive.google.com/file/d/0B_2QjjWMyLghQm9vZ3hhS3Z3dUk/view ***Asia***
https://drive.google.com/file/d/0B_2QjjWMyLghV3hMYWVoSFo0WHc/view ***Brazil ***
I had the same issue (I'm also on Claro Colombia). All you need to do is flash the official Motorola Lollipop 5.0.2 and it'll be working fine.
Firmware 5.0.2 XT1032 http://www.filefactory.com/file/5i311qq8mguf/BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml.zip
Follow this guide: http://motoroot.890m.com/restore-stock/
Don't skip any step.
Thanks mate, will try and post results.
Anyway, just to know.. why does this happen?
Why is that the radio was working all right and suddenly went kaput?
Chefry22 said:
I had the same issue (I'm also on Claro Colombia). All you need to do is flash the official Motorola Lollipop 5.0.2 and it'll be working fine.
Firmware 5.0.2 XT1032 http://www.filefactory.com/file/5i311qq8mguf/BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml.zip
Follow this guide: http://motoroot.890m.com/restore-stock/
Don't skip any step.
Click to expand...
Click to collapse
Did as stated, but no luck. no network for me.
Gps, wifi and bluetooth are working fine though.
donlloreda said:
Did as stated, but no luck. no network for me.
Gps, wifi and bluetooth are working fine though.
Click to expand...
Click to collapse
Any Ideas? I´m in desperate need of using my phone, well you know.... as a phone
HI Friends, (@Vinay)
I am new here, and have specifically registered to seek your help
I have D2212 IN version which was SIM unlocked.
Apparently, I was successful in
1) Unlocking the boot loader
2) Installing Vinay's Custom Nitrogen ROM
Subsequently, I used the phone happily for over 1month and problems started happening where Phone lagged so much that it became unbearable.
Also at the same time, I noticed my phone would lose its network.
I would get a X next to SIM indicator. No Signal. I swapped the SIM into other phone, the SIM works fine.
I put other working sim in the E3 D2212, again no Network. No Data (2G, 3G). Only WiFi works
So I decided to roll back to D2212_18.5.B.0.26_Customized IN.ftf via Flashtool
Still no dice. I still see no network.
When I hit *#*#7378423#*#*
I think (repeat think) the phone is SIM Locked.
No matter which slot (1 or 2) I insert it, I don't get Network or DATA
But I can certainly vouch the Same Vodafone IN SIM was working on the phone earlier.
Any help in this regards is greatly appreciated.
Regards
Dharmesh Shah
Mumbai, INDIA
Did you flashed the stock rom correctly?
Well I thought so
HI @vincy009
Many thanks for responding. Appreciate your help.
Well I thought I did.
I referred to a few youtube videos to do it using flash tool.
Also, pls note, I also tried flashing back Vinay's Nitrogen ROM, that too would not get Network.
So,it was 100% issue with the way I was flashing the rom (Stock or other)
Eventually, I surrendered and sent the Phone to Sony who refused to fix it citing it to be out of warranty due to unlocked boot loader
So I had to submit to a local Mobile repair shop who fixed it.
But I am yet to ascertain what exactly he did.
In the mean time, I have already read the Newbie's Q&A and other threads where they explain how to use flash tool.
If there is an accurate thread/howto/etc, pls point me to that, so that I can avoid mistakes in future.
Maybe you done something wrong in flashing step or it wud have been any Lil hardware problem.. If wanna do new things always get a nandroid backup.. So it wont get mess up.
Hello everybody, I'm new to sony phones but not to android rooting.
I have bought a second hand xperia XA 3115 that was locked to vodafone australia, got the code and when i put a telstra sim it works but not in 4g. The APN settings can't be modified (when I save it says that i can't ).. Do you guys had the same expeience?
I am open to try a different rom (got the files and the unlock code for the boot loader) but I didn't go for it as I rather collect more informations before I jump into it as the bootloader it says not unlockable. Is that a workaround for that (backing up before the dmr) so I can root it and hopefully gain the ability to modify the APN?
Thank you for your precious time, thank you XDA family for the endless fun you provide
Gabriel
Managed to get the data working after a full reset but nos stays on 3g and at times goes to h+ but not 4g. Speedtest gives 19 mb Gonna test next days. I would like to undestand tho if there's a way to root it even with boot locked.
thank you!
Haidelaido said:
Managed to get the data working after a full reset but nos stays on 3g and at times goes to h+ but not 4g. Speedtest gives 19 mb Gonna test next days. I would like to undestand tho if there's a way to root it even with boot locked.
thank you!
Click to expand...
Click to collapse
Can you post exactly what the message is when you try to save settings, and it says you can't... Also, I guess you tried Settings > more > mobile networks > preferred network type?
Hi, it does save but the option APN on/of is faded and can't do much. It takes but just 3g. Having a chat with a telstra operator right now but they don't know shiat!
Weird, phone was locked Vodafone now using telstra. They have no idea and now not even MMS or sms are working.
Haidelaido said:
Weird, phone was locked Vodafone now using telstra. They have no idea and now not even MMS or sms are working.
Click to expand...
Click to collapse
Did you already do 'download Internet and mms settings' from data options? Maybe sim card is funky...
How do you do that? Sim is 3 months old perfectly working on another phone. Tried millions of APN settings but no luck, I can save them but no 4g no sms MMS. I've also read of people not solving with root I am waiting to do that as don't know if I can root it easy due to locked bootloader.
If that helps
Flash the Custom AU firmware via Flashtool/xperia firm,
there is no need to unlock bootloader unless you need root which can be done after update & phone working.
the Vodafone firmware is still behind in its updates,the custom AU does not have all the carrier branding &
works across all carriers here,
Below is the latest N version details for the (F3115)
Device: Xperia XA (F3115)
CDA: 1302-4361
Market: Australia
Operator: Customized AU
Network: GENERIC
Version: 33.3.A.0.131 / R2B
Size: 1.76 GB
If you just want to update MM use the custom AU version for that and not the Vodafone one,
and remember if you have problems use Sony PC companion to restore the phone back to factory
default and start again, BUT PC companion will not restore phone if you have unlocked bootloader
in that case use sonys Emma or Flashtool to do it.
--
Skinny
Haidelaido said:
How do you do that? Sim is 3 months old perfectly working on another phone. Tried millions of APN settings but no luck, I can save them but no 4g no sms MMS. I've also read of people not solving with root I am waiting to do that as don't know if I can root it easy due to locked bootloader.
Click to expand...
Click to collapse
Settings > more > download Internet and mms settings...
sirskinny said:
Flash the Custom AU firmware via Flashtool/xperia firm,
there is no need to unlock bootloader unless you need root which can be done after update & phone working.
the Vodafone firmware is still behind in its updates,the custom AU does not have all the carrier branding &
works across all carriers here,
Below is the latest N version details for the (F3115)
Device: Xperia XA (F3115)
CDA: 1302-4361
Market: Australia
Operator: Customized AU
Network: GENERIC
Version: 33.3.A.0.131 / R2B
Size: 1.76 GB
If you just want to update MM use the custom AU version for that and not the Vodafone one,
and remember if you have problems use Sony PC companion to restore the phone back to factory
default and start again, BUT PC companion will not restore phone if you have unlocked bootloader
in that case use sonys Emma or Flashtool to do it.
--
Skinny
Click to expand...
Click to collapse
Thanks bro I will test it tonight, I need to find a friend that has Windows first. I am not loosing the Xperia features unless unlocking the bootloader right? Cheers again mate
levone1 said:
Settings > more > download Internet and mms settings...
Click to expand...
Click to collapse
Don't have such a thing unfortunately but I'll flash another stock later hopefully it will fix, thanks man
Haidelaido said:
Thanks bro I will test it tonight, I need to find a friend that has Windows first. I am not loosing the Xperia features unless unlocking the bootloader right? Cheers again mate
Click to expand...
Click to collapse
This is correct, you loose some features when boot loader is unlocked
--
Skinny
Sorted! Xperia flasher sorted out thanks guys I'm writing from Android 7 thank you!!!
I spent quite a bit of time figuring out how to make the VoLTE work on Airtel and Jio in India on a USA edition H8314 phone.
Sony for some reason doesn't bundle all operators VoLTE configuration in all images, not sure why, typically not the case with other high end phones. And they have region specific bundles or OEM customization.
I solved the problem by taking parts of the regular dual sim ZX2 firmware H8296_Customized IN_1314-9934_52.0.A.3.202_R4B, which has the VoLTE configuration for Airtel and Reliance, and flashing it on my phone. VoLTE works! No issues noticed so far (will update if I notice anything).
Here are the steps:
1. Install XperiFirm
2. download the Indian version of firmware for XZ2 dual, in my case H8296_Customized IN_1314-9934_52.0.A.3.202_R4B
3. download and install newflasher
4. From the downloaded and extracted set of files in XperiFirm download directory, copy the following to another directory
oem_other_X-FLASH-CUST-B6B5.sin
oem_X-FLASH-CUST-B6B5.sin
5. Copy the newflasher also to the same directory, now this directory should have 3 files
6. turn off the phone,
8. enter flashmode (vol down + connect USB cable to PC)
9. run the newflasher, in the directory you prepaired in step 4 and 5
10. Unplug from USB after the flashing is done and restart your phone, it should work with VoLTE on airtel as well as Jio. On airtel it may take a few minutes before the calls actually start going on VoLTE but it works perfectly fine.
This doesn't require bootloader unlock so all phone function would remain good. Feel Free to ask questions, the version of firmware on my XZ2C is 52.0.A.3.163 USA generic.
So this works good with Indian and US networks ?
ahzam said:
I spent quite a bit of time figuring out how to make the VoLTE work on Airtel and Jio in India on a USA edition H8314 phone.
Sony for some reason doesn't bundle all operators VoLTE configuration in all images, not sure why, typically not the case with other high end phones. And they have region specific bundles or OEM customization.
I solved the problem by taking parts of the regular dual sim ZX2 firmware H8296_Customized IN_1314-9934_52.0.A.3.202_R4B, which has the VoLTE configuration for Airtel and Reliance, and flashing it on my phone. VoLTE works! No issues noticed so far (will update if I notice anything).
Here are the steps:
1. Install XperiFirm
2. download the Indian version of firmware for XZ2 dual, in my case H8296_Customized IN_1314-9934_52.0.A.3.202_R4B
3. download and install newflasher
4. From the downloaded and extracted set of files in XperiFirm download directory, copy the following to another directory
oem_other_X-FLASH-CUST-B6B5.sin
oem_X-FLASH-CUST-B6B5.sin
5. Copy the newflasher also to the same directory, now this directory should have 3 files
6. turn off the phone,
8. enter flashmode (vol down + connect USB cable to PC)
9. run the newflasher, in the directory you prepaired in step 4 and 5
10. Unplug from USB after the flashing is done and restart your phone, it should work with VoLTE on airtel as well as Jio. On airtel it may take a few minutes before the calls actually start going on VoLTE but it works perfectly fine.
This doesn't require bootloader unlock so all phone function would remain good. Feel Free to ask questions, the version of firmware on my XZ2C is 52.0.A.3.163 USA generic.
Click to expand...
Click to collapse
beastonprowl said:
So this works good with Indian and US networks ?
Click to expand...
Click to collapse
I haven't traveled to USA since, but I do not see why it won't work.
thanks ahzam for sharing this. My XZ2 is on Customized Version CE1 and VoLTE didn't work with o2 Germany. I downloaded the DE firmware with xperifirm and flashed the 2 files you mentioned via newflasher v13. Reboot and everything is working fine now!
Thanks again,
drewster
Hi ahzam,
I have bought H8296 unlocked international version from USA.
I am also not able to use the VoLTE in India on airtel idea or jio.
Will this firmware help me to get the VoLTE.
After doing so, will I be getting future official Sony updates or it will be rooted device and Xperia support will end?
Can you please help?
Regards
Akhilesh
FantasticBeast007 said:
Will this firmware help me to get the VoLTE.
Click to expand...
Click to collapse
Yes, this should work.
FantasticBeast007 said:
After doing so, will I be getting future official Sony updates or it will be rooted device and Xperia support will end?
Click to expand...
Click to collapse
For me updates still work.
Your device will not be rooted after that. So in my opinion you will not loose your warranty.
Greetz
Thank you for confirming
I will try this and keep you posted if this works
Thank you Guys
It worked and now I get VoLTE on both Airtel and Jio.
However for Airtel it takes some extra 10 seconds to get VoLTE.
One problem I have noticed after this. I received an official xperia update but got an error "Could not Install" while installing this update.
Do you know how to resolve this issue?
Regards
Akhilesh
FantasticBeast007 said:
One problem I have noticed after this. I received an official xperia update but got an error "Could not Install" while installing this update.
Do you know how to resolve this issue?
Regards
Akhilesh
Click to expand...
Click to collapse
For me all updates worked so far without any error. I think i've read somewhere, that the update can be done via Sony companion. (But for me companion never worked in any way^^)
ahzam said:
I spent quite a bit of time figuring out how to make the VoLTE work on Airtel and Jio in India on a USA edition H8314 phone.
Sony for some reason doesn't bundle all operators VoLTE configuration in all images, not sure why, typically not the case with other high end phones. And they have region specific bundles or OEM customization.
I solved the problem by taking parts of the regular dual sim ZX2 firmware H8296_Customized IN_1314-9934_52.0.A.3.202_R4B, which has the VoLTE configuration for Airtel and Reliance, and flashing it on my phone. VoLTE works! No issues noticed so far (will update if I notice anything).
Here are the steps:
1. Install XperiFirm
2. download the Indian version of firmware for XZ2 dual, in my case H8296_Customized IN_1314-9934_52.0.A.3.202_R4B
3. download and install newflasher
4. From the downloaded and extracted set of files in XperiFirm download directory, copy the following to another directory
oem_other_X-FLASH-CUST-B6B5.sin
oem_X-FLASH-CUST-B6B5.sin
5. Copy the newflasher also to the same directory, now this directory should have 3 files
6. turn off the phone,
8. enter flashmode (vol down + connect USB cable to PC)
9. run the newflasher, in the directory you prepaired in step 4 and 5
10. Unplug from USB after the flashing is done and restart your phone, it should work with VoLTE on airtel as well as Jio. On airtel it may take a few minutes before the calls actually start going on VoLTE but it works perfectly fine.
This doesn't require bootloader unlock so all phone function would remain good. Feel Free to ask questions, the version of firmware on my XZ2C is 52.0.A.3.163 USA generic.
Click to expand...
Click to collapse
Can we get VoLTE for any region with these configurations? Like EMEA etc.
nos1609 said:
Can we get VoLTE for any region with these configurations? Like EMEA etc.
Click to expand...
Click to collapse
you should be able to get VoLTE for any region by following this process, you need to extract the files from right version of the bundle for that region.
hi, actually I'm using xz2 premium (H8166) which isn't supported by the jio sim and airtel volte so can I try this method? Thanks.
updated : actually, it's working for xz2 premium so no problem in Volte... so rite now Im using airtel and jio both working fine... but mobile restarts for network optimization while changing mobile data from sim1 to sim2 or sim2 to sim1. Anyways thanks Alot for this awesome tip man.. I really felt bad for my xz2 premium now I'm really happy. You saved my money. Thanks again.
drewsterAndi said:
For me all updates worked so far without any error. I think i've read somewhere, that the update can be done via Sony companion. (But for me companion never worked in any way^^)
Click to expand...
Click to collapse
It also did not worked via xperia companion.
However I ran software repair using xperia companion and it worked, Now I have Volte + All the Sony Security updates
---------- Post added at 03:48 AM ---------- Previous post was at 03:44 AM ----------
ganesh_84s said:
hi, actually I'm using xz2 premium (H8166) which isn't supported by the jio sim and airtel volte so can I try this method? Thanks.
updated : actually, it's working for xz2 premium so no problem in Volte... so rite now Im using airtel and jio both working fine... but mobile restarts for network optimization while changing mobile data from sim1 to sim2 or sim2 to sim1. Anyways thanks Alot for this awesome tip man.. I really felt bad for my xz2 premium now I'm really happy. You saved my money. Thanks again.
Click to expand...
Click to collapse
Yes the restarting is known issue and Sony does is intentionally. I have XZ2 and planning to buy XZ2 Premium also in coming months.
ganesh_84s said:
hi, actually I'm using xz2 premium (H8166) which isn't supported by the jio sim and airtel volte so can I try this method? Thanks.
updated : actually, it's working for xz2 premium so no problem in Volte... so rite now Im using airtel and jio both working fine... but mobile restarts for network optimization while changing mobile data from sim1 to sim2 or sim2 to sim1. Anyways thanks Alot for this awesome tip man.. I really felt bad for my xz2 premium now I'm really happy. You saved my money. Thanks again.
Click to expand...
Click to collapse
First of all, I would like to say Big thanks who share this Procedure, Now I am able to use Volte Functionality
Now I have the same problem while changing sim1 to sim2 to and vice versa but before did volte procedure it was working fine in both sim, so as per my opinion this problem related somewhere Volte functional
I bought this Cell from the Middle East, So in Middle east it was working fine while changing Sim1 & Sim2 Procedure and even in India it was working
So if someone does R&D than might be it is a curable issue, I don't know why Sony did a big mistake nowadays even Oops, Vivo, all Chinese implements successfully these things, even sony dosnt implement Auto Hide status bar in Compact Series Cell
sunnymodh said:
First of all, I would like to say Big thanks who share this Procedure, Now I am able to use Volte Functionality
Now I have the same problem while changing sim1 to sim2 to and vice versa but before did volte procedure it was working fine in both sim, so as per my opinion this problem related somewhere Volte functional
I bought this Cell from the Middle East, So in Middle east it was working fine while changing Sim1 & Sim2 Procedure and even in India it was working
So if someone does R&D than might be it is a curable issue, I don't know why Sony did a big mistake nowadays even Oops, Vivo, all Chinese implements successfully these things, even sony dosnt implement Auto Hide status bar in Compact Series Cell
Click to expand...
Click to collapse
yes, same point before volte its working fine but now restarting issue and I can't update to latest security update too... but I think it's not big issue.. let me flash it anyway restart issue is seriously curable.
sunnymodh said:
First of all, I would like to say Big thanks who share this Procedure, Now I am able to use Volte Functionality
Now I have the same problem while changing sim1 to sim2 to and vice versa but before did volte procedure it was working fine in both sim, so as per my opinion this problem related somewhere Volte functional
I bought this Cell from the Middle East, So in Middle east it was working fine while changing Sim1 & Sim2 Procedure and even in India it was working
So if someone does R&D than might be it is a curable issue, I don't know why Sony did a big mistake nowadays even Oops, Vivo, all Chinese implements successfully these things, even sony doesn't implement Auto Hide status bar in Compact Series Cell
Click to expand...
Click to collapse
Today I discovered 3 more problems
1)After Install Volte Firmware, Because in India no Official launched XZ2C , after install we can not get Firmware Update
2)If you Switch Mobile data between two sims, Cell will restart automatically
3)In Setting->Display you can not get Super Vivid Mode or Professional Mode for better color reproduction
So if anyone tells me XZ2C officially launched which country with Volte Function, if we get an answer than we can solve all the issue
Fact. reset
sunnymodh said:
Today I discovered 3 more problems
1)After Install Volte Firmware, Because in India no Official launched XZ2C , after install we can not get Firmware Update
2)If you Switch Mobile data between two sims, Cell will restart automatically
3)In Setting->Display you can not get Super Vivid Mode or Professional Mode for better color reproduction
To get back this, just factory re-set and will get this options. Anyway It is not working any VoLTE (it's just showing the LTE symbol and option in seeting, in reality your call is routed on 3g/2g. ) you can verify this by selecting 4g only and try calling.
So if anyone tells me XZ2C officially launched which country with Volte Function, if we get an answer than we can solve all the issue
Click to expand...
Click to collapse
>>> 1)After Install Volte Firmware, Because in India no Official launched XZ2C , after install we can not get Firmware Update
How did you find this? As far as I see there is no new firmware came in this recent times. Correct me if I am wrong.
>>>3)In Setting->Display you can not get Super Vivid Mode or Professional Mode for better color reproduction
To get back this, just factory re-set and will get this options. Anyway It is not working on any VoLTE (it's just showing the LTE symbol and option in settings, in reality your call is routed on 3g/2g. ) you can verify this by selecting 4g only and try calling.
tvk73 said:
>>> 1)After Install Volte Firmware, Because in India no Official launched XZ2C , after install we can not get Firmware Update
How did you find this? As far as I see there is no new firmware came in this recent times. Correct me if I am wrong.
>>>3)In Setting->Display you can not get Super Vivid Mode or Professional Mode for better color reproduction
To get back this, just factory re-set and will get this options. Anyway It is not working on any VoLTE (it's just showing the LTE symbol and option in settings, in reality your call is routed on 3g/2g. ) you can verify this by selecting 4g only and try calling.
Click to expand...
Click to collapse
For Latest Software Update Just Use Software Xperifirm, you will get all country latest Software Info and also you can download
Germany, India, Russia you will get Volte Services, Right now I am using Volte Function in Sony XZ2C
FantasticBeast007 said:
It also did not worked via xperia companion.
However I ran software repair using xperia companion and it worked, Now I have Volte + All the Sony Security updates
---------- Post added at 03:48 AM ---------- Previous post was at 03:44 AM ----------
Yes the restarting is known issue and Sony does is intentionally. I have XZ2 and planning to buy XZ2 Premium also in coming months.
Click to expand...
Click to collapse
Can you tell me which Firmware you are using, because I am not able to get any OTA Update
https://xpericheck.com/device/H8296
Current build is 52.0.A.11.3