[Q] Huawei Honor H60-L12 ROM - Software Install Failed! - Honor 6, 6 Plus Q&A, Help & Troubleshooting

Hi all,
I bought a H60-L12, but the manufacturer had installed the H60-L02 rom (version H60-L02V100R001CHNC00B611).
How can I install the H60-L12 version?
I've already tried to install these 5 ROMS:
H60-L12_EMUI3.0_Android4.4_V100R001CHNC00B307
H60-L12_EMUI3.0_Android4.4_V100R001CHNC00B611
H60-L12-4-4-V100R001CHNC00B118-unicom-32g
H60-L12-4-4-V100R001CHNC00B119-High-unicom
H60-L12-V100R001CHNC00B121
But I always get the error "Software Install Failed!" with the volume + & - & power method.
Also tried with the *#*#2846579#*#* and didn't worked as well.
Tried to install different stock versions and nothing.
What should I do more?
Regards,
Luis

Check INDEX
"For L12 Users ONLY" Sections you might need to restore correct version stock local.prop and build.prop

I have the same problem but I am on version L04 at the moment and can not got back to L12. My phone is not rooted nor unlocked. I asked the support of Huawei via mail but till now no reaction from their side...

Julsen1985 said:
I have the same problem but I am on version L04 at the moment and can not got back to L12. My phone is not rooted nor unlocked. I asked the support of Huawei via mail but till now no reaction from their side...
Click to expand...
Click to collapse
hi have you succeded to install L12? i found that you may need to install the L12 recovery image first and then you can flsh back to your L12 firmware have you tried?

henr721 said:
hi have you succeded to install L12? i found that you may need to install the L12 recovery image first and then you can flsh back to your L12 firmware have you tried?
Click to expand...
Click to collapse
Hi, yes I did. I wrote the way here (in german)
http://www.iphone24.org/blog/howtos...ielle-firmware-zurueck-flashen-full-restore-1
An thermalboyz included it into his collection here: http://forum.xda-developers.com/honor-6/general/huawei-honor-6-index-t2963209
Scroll down to: 3 Button Restore not working (If you change between variant example L02>L12) Or Partition been changes and cannot restore back Stock version. Use this steps below : -

From huawei club forum, which posted by Chinese, they provided a "middle package" for H60-L02/L12, L01/L03/L11/L21:
Link for refer: http://club.huawei.com/thread-4744481-1-1.html
中转包地址如下:
荣耀6移动版(H60-L01/L03/L11/L21)
荣耀6联通版(H60-L02/L12)
We have to download it, then do upgrade it first before upgrade ROM version.
P/S: If you cannot extract it, may need rename it from chinese name to latin letter.
If need assist in Chinese word, let me know.
Hope this help.
lmpcruz said:
Hi all,
I bought a H60-L12, but the manufacturer had installed the H60-L02 rom (version H60-L02V100R001CHNC00B611).
How can I install the H60-L12 version?
I've already tried to install these 5 ROMS:
H60-L12_EMUI3.0_Android4.4_V100R001CHNC00B307
H60-L12_EMUI3.0_Android4.4_V100R001CHNC00B611
H60-L12-4-4-V100R001CHNC00B118-unicom-32g
H60-L12-4-4-V100R001CHNC00B119-High-unicom
H60-L12-V100R001CHNC00B121
But I always get the error "Software Install Failed!" with the volume + & - & power method.
Also tried with the *#*#2846579#*#* and didn't worked as well.
Tried to install different stock versions and nothing.
What should I do more?
Regards,
Luis
Click to expand...
Click to collapse
Julsen1985 said:
I have the same problem but I am on version L04 at the moment and can not got back to L12. My phone is not rooted nor unlocked. I asked the support of Huawei via mail but till now no reaction from their side...
Click to expand...
Click to collapse
Julsen1985 said:
Hi, yes I did. I wrote the way here (in german)
http://www.iphone24.org/blog/howtos...ielle-firmware-zurueck-flashen-full-restore-1
An thermalboyz included it into his collection here: http://forum.xda-developers.com/honor-6/general/huawei-honor-6-index-t2963209
Scroll down to: 3 Button Restore not working (If you change between variant example L02>L12) Or Partition been changes and cannot restore back Stock version. Use this steps below : -
Click to expand...
Click to collapse

Hi all, I'm new of the forum, and this seems to be exactly the same issue I'm having.
I had to buy a replacement for my H60-L12 and I decided to buy a new one, so I went to the same store and I ordered the same phone.
When it arrived, the label indicate H60-L12, bon on the box and on the back of the phone. But when I switched on, the model name and the serial number indicated the H60-L02.
What is really strange is that, according to what I have been seeing on technical specification on internet, the L02 should have 16GB di memory, while this one has 32GB.
Do you have any idea if it is possible to verify from the IMEI what is the real model of the phone and if it is possible that a L02 firmware version was installed on a L12? I have the B316, I have tried to dowload the B316 for the L12 and put it on the dload folder, then local update, but it fails (probabily because it is the same version?).
I have download the H60-L02/L12 file indicated in the previous post, but it is very small. Is it ok?
After I have installed it using the local update procedure, what should I do?
Thanks!

I will share my experience with this issue.
As it turned out, my L12 was flashed with the wrong firmware and seens as a L02.
No way to restore the correct version with any more or less standard procedure (not even copying the built and prop files from the L12, the upgrad was always failing).
So, for future reference, what I did was:
- use the unbrick function to load a EMUI2.3 version of the firmware (at this point the phone was almost unusable because everything was crashing)
- copied the L12 B316 on the SD in dload directory
- installed using the three button procedure
The upgrade was correctly executed and now everything is working fine.
In case someone was wondering why I didn't use the unbrick function to load the L12 B316, the answer is: I did it, but it was not working. As I said, it seems that the unbrick function leaves a lot of the previous installation behind, and despite the load of the B313 (yes, I tried the 313 to be able to update then to 316 with the complete update package and have a clean installation), the update package was downloaded but not installed, always giving error. Same with the three button procedure.
So, the only way I found has been to revert to 2.3 and then apply the update.
Now I would like to know who flashed the L02 on my L12 and made me loose four days

Related

[Q] How to Unlock bootloader of Huawei Ascend G525 and install German firmware

Hi,
I got the Huawei Ascend G525 as a gift from brother in law living in china, and now I am in a bind that it does not have the google play, i installed it using the apk file for google play but the whole UI is in Chinese settings , and the usual Chinese OS version issues for english user >_< , I managed to find and download German firmware (sorry forgot the link to post where it was) and tried to install it but the update failed. Further research led me to believe that i have to unlock its bootloader and I tried to use the method on huawei site (using adb toolkit) but for that i need bootloader unlock key and the site options to get key from huawei does not have G525 in list, so I am back to square one, Please let me know how i can unlock bootloader of Huawei G525 and if there is a new firmware I can use or something like flashing phone rom with Odin (I did flash my galaxy tab 2.0 with odin with new UK firmware)
The Android version is 4.1.2
and firmware file name, i download is Ascend_G525_firmwareú G525-U00,Android 4.1,Emotion_UI,G525-U00 V100R001C00B188,West_Europe
my mobile current firmware is G525-U00V100R001CHNC00B180
Please any help will be useful.
saleemafaq said:
Hi,
I got the Huawei Ascend G525 as a gift from brother in law living in china, and now I am in a bind that it does not have the google play, i installed it using the apk file for google play but the whole UI is in Chinese settings , and the usual Chinese OS version issues for english user >_< , I managed to find and download German firmware (sorry forgot the link to post where it was) and tried to install it but the update failed. Further research led me to believe that i have to unlock its bootloader and I tried to use the method on huawei site (using adb toolkit) but for that i need bootloader unlock key and the site options to get key from huawei does not have G525 in list, so I am back to square one, Please let me know how i can unlock bootloader of Huawei G525 and if there is a new firmware I can use or something like flashing phone rom with Odin (I did flash my galaxy tab 2.0 with odin with new UK firmware)
The Android version is 4.1.2
and firmware file name, i download is Ascend_G525_firmwareú G525-U00,Android 4.1,Emotion_UI,G525-U00 V100R001C00B188,West_Europe
my mobile current firmware is G525-U00V100R001CHNC00B180
Please any help will be useful.
Click to expand...
Click to collapse
can you tell me where did you downloaded that kind of firmware? can I have a link? thanks..
jeehuu91 said:
can you tell me where did you downloaded that kind of firmware? can I have a link? thanks..
Click to expand...
Click to collapse
If you tell me the block name of recovery I will make backup for you
Until I´m not 100% sure which block it is I will not replace stock recovery against cwmr.
cmoegele said:
If you tell me the block name of recovery I will make backup for you
Until I´m not 100% sure which block it is I will not replace stock recovery against cwmr.
Click to expand...
Click to collapse
I don't know how to determine the block name my handset's recovery... how do I know that? Thanks...
my fear is, that we both have problems for flashing.
The unlock code for the bootloader you can get from huawei directly.
I tried this on my European version, but this will not be offered from Huwaei ( only chinese versions).
So I´m still not able to flash chinese Rom (b191) or any other Miui or Lewa Rom ,...
I also confirm the lack of bootloader unlock request in Huawei's website.
What did you do to get the bootloader unlock code? Did you send an e-mail? Where?
I also find myself in a dead end, because I try to get a backup of the current ROM in the phone, connect succesfully through adb (downloaded drivers from here ) however following instructions from here:I can not connect the device with "fastboot devices" (i get to Huawei Device devices in windows device manager with yellow exlamation mark and the phone has been booted in a pink background, i think this is the bootloader mode because I have done it with all three buttons, power, vol+, vol-). Do you think this is a locked bootloader problem?
Late reply and updates
Hi,
Sorry for not following post, (i think i accidently turned off the option to inform me of new replies via email)
I tried emailing to both the german support email and the chinese, chinese support email gave me no reply even though i mailed them 3 times, but german one did and said that my phone is from china so they can't provide any support,
I tried to talk to them on facebook and local Huawei support center, facebook, no help, though someone else was willing to him and thanks to him poiting to way how to install english super use i am able to see almost all system messages in english, and as for the local support, since its not launched here they said they can't do anything,
The problem at hand was that it was not launched any where else, so no english version firmware i could find,
I almost bricked phone when i played with the "sorry forgot name" sytem file where it said to include the contact mismatch to 10 so that i can see the contacts name in the messages (its from china so least match is 11) and thanks to my luck i was able to upgrade firmware to b191 from b180 on 3rd try and since then i am scary cat to do anything with phone,
and now i read that its being launched in UAE, so looking forward if they put new firmware download on english website, (hoping they dont wait for an update to put it on website and put the current stock one)
please update me if you can get your hands on new english firmware , ty
firmware link
jeehuu91 said:
can you tell me where did you downloaded that kind of firmware? can I have a link? thanks..
Click to expand...
Click to collapse
hi, i have the link but since i am new, site wont let me post link, u can PM me for it
theoxarhs said:
I also confirm the lack of bootloader unlock request in Huawei's website.
What did you do to get the bootloader unlock code? Did you send an e-mail? Where?
I also find myself in a dead end, because I try to get a backup of the current ROM in the phone, connect succesfully through adb (downloaded drivers from here ) however following instructions from here:I can not connect the device with "fastboot devices" (i get to Huawei Device devices in windows device manager with yellow exlamation mark and the phone has been booted in a pink background, i think this is the bootloader mode because I have done it with all three buttons, power, vol+, vol-). Do you think this is a locked bootloader problem?
Click to expand...
Click to collapse
I send a short Email to [email protected] asking for the unlock code on saturday 7-12-2013.
Dear sir/madam,
I tried applying for a bootloader unlock code at unlock url which I cannot post because of XDA forum restricting me, but my device (Ascend G525) was not listed. I supply the data via this mail in the hope to get a bootloader unlock code via this way instead.
Product Model: Huawei Ascend G525
SN: ****************
IMEI: ****************
ProductID: ****************
I hope to hear from you soon.
Yours sincerely,
******************
Click to expand...
Click to collapse
I immediatly got a response from Huawei on monday.
Dear Customer,
Thank you for supporting Huawei device.
Your unlock code : ***************** ,please keeping your unlock code properly. Thank you!
Huawei Terminal Company limited
Click to expand...
Click to collapse
That's the good news, the bad news is that as far as connecting to my device I got as far as you got. As I'm on Ubuntu 13.04 64bit I added the usb rule needed for Huawei devices. It shows up when I execute "./adb devices". When I boot into hboot/fastboot mode by pressing the volume buttons and the on button I get the pink screen, but it does not show up when I run "./fastboot devices".
Anybody who knows how I can get fastboot to connect to a Huawei G525?
---------- Post added at 03:58 PM ---------- Previous post was at 03:09 PM ----------
My bad, I thought I was starting the device in fastboot mode, but the pink screen denotes the download mode. I looked up the instructions to start the device into fastboot mode at sigmakey[dot]com. The complete list of steps that I followed were
Remove battery for >= 10 seconds
replace the battery
hold volume down and power button
when the screen locks on the Huawei logo you're in fastboot mode
connect the device via USB
run:" fastboot devices" and see if it's listed
run: "fastboot oem unlock [unlockcode]"
HUAWEI ASCEND G525 bootlock?
Got my phone 6 days ago. Rooted it.
Third day I messed it up by deleting languages (stupid, but selected them with a cleaner & removal tool).
I formatted a micro sd card, downloaded original firmware, started up in the installation mode but while busy unpacking, "installation failed".
Is it because of a bootlock? or is it something else.
Is there an boot unlocker for download for the G525? The phone doesn't start up, so I can only work out of the boot menu or sd card.
All tips are welcome.
try again
Jopiextra said:
Got my phone 6 days ago. Rooted it.
Third day I messed it up by deleting languages (stupid, but selected them with a cleaner & removal tool).
I formatted a micro sd card, downloaded original firmware, started up in the installation mode but while busy unpacking, "installation failed".
Is it because of a bootlock? or is it something else.
Is there an boot unlocker for download for the G525? The phone doesn't start up, so I can only work out of the boot menu or sd card.
All tips are welcome.
Click to expand...
Click to collapse
Where did you buy your phone from? Mine is from china , the bootunlocker is required to install custom rom (what i came to conclusion, from forums etc, corrsct me if it isn't the case), or rom other than compatible one, my has CHN in its firmware name and the firmware from chinese sites can only be used to update chinese firmware, i wanted to install the german firware for google play(now i achv through apk) and msg and phone number string match(Still found no soluton for it).
Now coming to your issue, i accidently deleted a system file too and phone won't start, so i downloaded firmware , copied the update folder as instructed in the pdf with it, but installation failed, being desperate, i tried again and again , and it would fail some point during extraction, but then on 6th or 7th attempt the file went threw, so either take your phone to support center best solution i would say, or try installing it a few times, try using a different sd card with better speed, but sorry cannot give a conclusive solution. ( Haven't messed with phone again )
saleemafaq said:
Where did you buy your phone from? Mine is from china , the bootunlocker is required to install custom rom (what i came to conclusion, from forums etc, corrsct me if it isn't the case), or rom other than compatible one, my has CHN in its firmware name and the firmware from chinese sites can only be used to update chinese firmware, i wanted to install the german firware for google play(now i achv through apk) and msg and phone number string match(Still found no soluton for it).
Now coming to your issue, i accidently deleted a system file too and phone won't start, so i downloaded firmware , copied the update folder as instructed in the pdf with it, but installation failed, being desperate, i tried again and again , and it would fail some point during extraction, but then on 6th or 7th attempt the file went threw, so either take your phone to support center best solution i would say, or try installing it a few times, try using a different sd card with better speed, but sorry cannot give a conclusive solution. ( Haven't messed with phone again )
Click to expand...
Click to collapse
Thanks!!!
I live - and bought mine - in Holland (the Netherlands).
I downloaded firmware too but when in download mode and with SD card in, the update stops ("Update failed").
How did your rom/firmware come trough? By updating from sd card or by downloading update directly from sd card?
Which firmware or rom did you download?
Ask Huawei support center
Hi,
First is there no support center for Huawei in your area ? In my case i got the mobile as gift from china and since this model G525 is not launched in my country, the support center refused on any support regarding firmware, so i went to chinese site http://consumer.huawei.com/cn/ and got the firmware from there, my previous firmware was B180 and then i updated it to B191 (currently available on china site).
Second where did you download the firmware from ? Because when i was trying to install the firmware from europe or us etc, (main reason the contacts least string match issue) , i could not find any firmware file on those sites, i went through all the sites, I even emailed german support , and they refused that they don't have any firmware, duh, because my mobile IMEI was not in their data base , (no ****), i do manage to find one posted by someone while going throw forums, but it failed to install, which lead me to believe i need bootunlock code
As for the update is concerned, I am not sure what are you asking about updating from SD card or downloading from SD card ? The only method Huawei G525 have is to download file to computer, extract it, put the update folder in the formatted sd card and then start the phone with volume keys so it start downloading file from sd card and then update firmware. Even the option from the settings to update firmware requires the same, just that , phone start itself in download mode and start the same process.
Like i said i don't have a specific answer why the update is failing, but most probably because the firmware you are trying to install does not support the current you have, I don't know why the hell they would put a restriction in update package to lock down it with previous firmware region. Since you might not know which firmware you previously had the new one might not support the old version, like B191 requires to have B182 or higher version, (wtf) mine came with B180, and there is no B182 or higher available for download, so it could be your phone has old firmware, not supported by current, so all i can say is better take it to customer service, and ask them for help,
and the method i mentioned is was just hit and trial, i was just desperate, so i kept phone pushing to update it.
Let me know if you find any better solution or how to install other firmwares
German Firmware
Hi, for those looking for german firmware , here is the forum link,
http://www.android-hilfe.de/huawei-...ware-vom-europaeischen-geraet-ausstatten.html
go to the Digitdia post , and get the download link,
Don't know if forum allows me to post other forums links, but i do not want to take credit by posting the download link, so please visit the site, if you do not want to here is the download link anyway
http://rom.android-host.de/HUAWEI/G525/B188/G525_U00_B188.zip
Both,
Thank you very much for the reply.
I rooted my phone, so if I send it to the wervice centre, I'll have to pay ******** lots of money.
So, I will keep trying to find the right firmware (update) for my phone.:good:
EDIT: Sal, the link WORKED. So it WAS the Western-Europe firmware i needed. Super, great, thanks!
ascend g525 can i update to german firmware
Jopiextra said:
Both,
Thank you very much for the reply.
I rooted my phone, so if I send it to the wervice centre, I'll have to pay ******** lots of money.
So, I will keep trying to find the right firmware (update) for my phone.:good:
EDIT: Sal, the link WORKED. So it WAS the Western-Europe firmware i needed. Super, great, thanks!
Click to expand...
Click to collapse
My firmware is g525-U001v100r001c00b189 can I try western Europe firmware
I have unlocked boot loader even I deleted something when rooted my phone worked but gave some bug
Is this English
Please help
I have the same query, mine is G525-U00V100R001C00B187 are the links for Europe or Germany applicable to my device? I want to have a fall back before I start tinkering with my device and rooting it... If anyone can shed some light on this, it will really be a great help...
Update: Looks like its a European firmware, based on this, http://www.android-hilfe.de/huawei-ascend-g525-forum/482260-chinesisches-g525-mit-einer-software-vom-europaeischen-geraet-ausstatten.html.
g525 firmware
here list of huawei firmware release
http://asanfile.com/file?path=huawei/flash file/g525 - u00/android 4.1/
plz help how to unlock bootloader i already got unock code from huawei but i dont how to unlock or waht software is needed
just to help unlock
http://www.modaco.com/topic/362152-unlocking-bootloader-oficially-with-the-code-of-huawei/
i found this site i hope its helpful to you unlocking bootloader
credits to him if it'll help
i've tried it and it works (g525)
as for locking codes just go to huawei site posted earlier in this thread
raenne said:
i found this site i hope its helpful to you unlocking bootloader
credits to him if it'll help
i've tried it and it works (g525)
as for locking codes just go to huawei site posted earlier in this thread
Click to expand...
Click to collapse
Thanks for this Link.

[TUTORIAL]How to update EVA-L09C636 (Asia-Pacific) model to B361 (EMUI 5)

I had been searching for a way to update my EVA-L09C636 (Asia-Pacific) model to EMUI 5.0. During the previous month I tried to install EVA-L09C636B361 firmware via either dload and Huawei Updater, but such means of direct installation never worked out.
Now the problem is solved, and the solution is quite simple, though a little bit unexpected: using Huawei Updater to install EVA-L19C636B190 before installing EVA-L09's own B361 firmware. I mean, it is interesting that we have to "borrow" the B190 firmware from the Dual SIM L19 model in order to update to EMUI 5.
(I'm not the first person to find the solution. I just found out that in a Taiwanese forum a tutorial is already posted. )
So there are two steps to install B361:
1.
Install EVA-L19C636B190 via Huawei Updater
Use Custom ROM URL
Copy and paste the link to EVA-L19C636B190:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1079/g104/v64578/f1/
Use the HiSuite on PC to finish the installation of B190 (Set its proxy to 127.0.0.1 and the port to 41279)
2.
Repeat the previous process, but this time, replace the link with the one to EVA-L09C636B361:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1256/g104/v73928/f1/
Again, use the HiSuite to finish the installation of B361
Note that the C636B190 version firmware for L19 model does run on L09 without the support of the L09-exclusive NFC. I think there should be a thread discussing this. Anyways, before official update comes out, the two steps above seem to be the only way to install EMUI 5 on the Asia-Pacific EVA-L09C636 version without losing data.
That is interesting, I dont have a C636 but I would assume just doing step 2 without the need to flash a L19B636 would do the trick.
whyhowie said:
I had been searching for a way to update my EVA-L09C636 (Asia-Pacific) model to EMUI 5.0. During the previous month I tried to install EVA-L09C636B361 firmware via either dload and Huawei Updater, but such means of direct installation never worked out.
Now the problem is solved, and the solution is quite simple, though a little bit unexpected: using Huawei Updater to install EVA-L19C636B190 before installing EVA-L09's own B361 firmware. I mean, it is interesting that we have to "borrow" the B190 firmware from the Dual SIM L19 model in order to update to EMUI 5.
(I'm not the first person to find the solution. I just found out that in a Taiwanese forum a tutorial is already posted. )
So there are two steps to install B361:
1.
Install EVA-L19C636B190 via Huawei Updater
Use Custom ROM URL
Copy and paste the link to EVA-L19C636B190:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1079/g104/v64578/f1/
Use the HiSuite on PC to finish the installation of B190 (Set its proxy to 127.0.0.1 and the port to 41279)
2.
Repeat the previous process, but this time, replace the link with the one to EVA-L09C636B361:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1256/g104/v73928/f1/
Again, use the HiSuite to finish the installation of B361
Note that the C636B190 version firmware for L19 model does run on L09 without the support of the L09-exclusive NFC. I think there should be a thread discussing this. Anyways, before official update comes out, the two steps above seem to be the only way to install EMUI 5 on the Asia-Pacific EVA-L09C636 version without losing data.
Click to expand...
Click to collapse
I was searching for this for months. I bought my p9 EVA-L09C636 in the US (I'm european) and I never had the chance to update, even at 4.1.1. I went crazy because I tried several times to unlock the bootloader first, installing twrp and flashing updates but with no success. It's unbelievable that I need to fake the version with huawei updater to obtain the updates for my phone. Now I've Nougat, without factory reset, with everything working, from nfc to all stock apps and services. Thank you very much
Z-Blade said:
That is interesting, I dont have a C636 but I would assume just doing step 2 without the need to flash a L19B636 would do the trick.
Click to expand...
Click to collapse
Well, in that case it keeps failing at 1%. I saw some previous posts talking about this as well.
Need Help
My model is Huawei P9 EVA-L09C636
I tried to update like this, it's started updating and got an error while updating then phone rebooted with new update,
but there's lot of errors,
Built Number displays as - NRD90M test-keys
Updater missing in settings
Camera missing
Flash Light not working
Clock missing
File Manger missing
and few more default huawei apps missing.
How do I fix it or downgrade to previous version back?
Thanks finally I was able to update my P9 to Nougat using this steps. The only difference is that there is a EVA-L09C636B190 available now so i didnt have to use the version for any other cell, I was afraid to do it. So following this steps i was able to upgrade from 168 to 190 and finally to 361 version.
My Phone is Huawei P9 EVA-L09C636
Even though my phone is L09 I've flashed L19 by following the steps on this thread -
(https://forum.xda-developers.com/mate-8/general/nxt-l09c636b521-official-firmware-guide-t3544729/)
2016.12.29 - EVA-L19C636 - EVA-L19C636B361
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1583/g104/v74666/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...ll/hw/spcseas/update_data_full_hw_spcseas.zip
it's still NRD90M test-keys. but i'm cool with it.
Works on AL00 as well?
I was wondering if I can get the most current european rom on my AL00 with that method as well?
Holy cow thank you for this tutorial.
I spent six hours following every tutorial I could find on the web and my P9 staunchly refused to install ANY update from the very next one after the one it came with all the way up to the latest!
After hours and hours of trying this method is the one that worked.
Edit: This firmware is a developer build.
There have been several updates installed since it was released.
After you this firmware it you should immediately install Huawei Firmware Finder from the Play Store and install the latest full OTA.
The developer build changes the device ID of your phone so you have to manually add the model of your phone in Firmware Finder as:
EVA-L19C636
Otherwise Firmware Finder would tell you there are no firmwares available for your model.
If you can't install the latest OTA immediately after installing this firmware, first install the next one available (38 if I recall correctly) then install the latest OTA -- 38 will say it failed to install but it actually installs just fine, then install the latest full OTA.
That will give you all the bug fixes and the security patches from Google.
Also note that this firmware works on both the dual sim and single sim models (it's built for the single sim but my device is dual sim and the sim configuration in settings works).
snjflame said:
My model is Huawei P9 EVA-L09C636
I tried to update like this, it's started updating and got an error while updating then phone rebooted with new update,
but there's lot of errors,
Built Number displays as - NRD90M test-keys
Updater missing in settings
Camera missing
Flash Light not working
Clock missing
File Manger missing
and few more default huawei apps missing.
How do I fix it or downgrade to previous version back?
Click to expand...
Click to collapse
The build number is normal.
As for the disappearing apps, it sounds like you have faulty flash storage.
That will cause files and apps to randomly disappear.

Debrand from FRD-AL00 to FRD-L09 and update to Nougat.

As some of you might know, I recently bought FRD-AL00 variant of this amazing phone. For those who doesn't know, this is Chinese variant with 4GB of RAM and 32 GB of internal storage. Its European equivalent is FRD-L09 and from same rationale, FRD-AL10 and FRD-L19 are equivalents but it has 64GB of internal storage.
I bought it at AliExpress and it came flashed with FRD-L19C432B131 (wrong firmware). The phone were really unstable, it was rebooting very often, specially when I played videos on YouTube or when phone was under heavy load (low memory and many apps opened).
My first try: Debrand to right EU version (FRD-L09). I did it doing standard procedures: Unlock bootloader/TWRP/Root/Debrand/Flash (FRD-L09C432B131). I followed these tutorials:
** WARNING: Backup your data cause this procedure wipes everything. **
** Do it at your own risk **
1) Unlock bootloader/Install TWRP/Root:
Followed this procedure: https://forum.xda-developers.com/honor-8/how-to/guide-unlock-bootloader-tested-root-t3443946
1.1) For this step I ran DCUnlocker because I coudn't get my unlock code from Huawei
1.2) Warning: Pay attention and install right version of TWRP, there are two links to download
1.3) Flash superSU
1.3.1) Download SuperSU
1.3.2) Flash it through TWRP
1.3.2.1) Power off and then press volume up + power (unplug USB)
1.3.2.2) Press "Install", select SuperSU ZIP and flash it. Now you're root
2) Debrand using SRKTool
Followed steps in this tutorial: https://www.youtube.com/watch?v=JZVsIKtdgV4&t=310s
2.1) I skipped step to change build.prop, cause right after debrand I reflashed new ROM
2.2) Warning: Don't forget to enable USB debugging, grant access to your computer and grant access to SRKTool actions in SuperSU (it will ask for permission when SRK tries to change something). Make sure SuperSU is running
2.3) After reboot, just power off your phone and move to next step
3) Flash EU ROM
3.1) Make sure you copied ROM FRD-AL09C432B131 and unziped at folder dload on your SDCard
3.2) Press Volume UP + Volume Down + Power
3.3) At this point, your phone might enter in Huawei's recovery mode and start flashing new ROM. It takes about 5 ~ 10 minutes
Now. I realized even "right" ROM for similar model were still unstable. Actually nothing has changed. My next attempt: Nougat!
4) Update to Nougat
This step were simpler. Just execute Charles method and it works seamsless:
Charles Method: https://forum.xda-developers.com/showpost.php?p=69885525&postcount=11
Other responses for different variants: https://forum.xda-developers.com/honor-8/how-to/various-responses-charles-app-b360-t3541342
In my case (FRD-L09C432B131), the response I used was:
Code:
{
"status": "0",
"autoPollingCycle": "1",
"components": [{
"name": "FRD-L09C432B360",
"version": "FRD-L09C432B360",
"versionID": "73856",
"description": "FRD-L09C432B360 (2017/01/18)",
"createTime": "2017-01-18T01:57:51+0000",
"url": "http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v73856/f1/"
}]
}
PS: did not lost any data on this upgrade but backup, just to make sure you won't loose anything.
Finally...
Now, phone is running FRD-L09C432B360 and seems to be very stable.
Please let me know if you have any questions and follow me on Twitter: emilioyn.
mediasonic said:
As some of you might know, I recently bought FRD-AL00 variant of this amazing phone. For those who doesn't know, this is Chinese variant with 4GB of RAM and 32 GB of internal storage. Its European equivalent is FRD-L09 and from same rationale, FRD-AL10 and FRD-L19 are equivalents but it has 64GB of internal storage.
I bought it at AliExpress and it came flashed with FRD-L19C432B131 (wrong firmware). The phone were really unstable, it was rebooting very often, specially when I played videos on YouTube or when phone was under heavy load (low memory and many apps opened).
My first try: Debrand to right EU version (FRD-L09). I did it doing standard procedures: Unlock bootloader/TWRP/Root/Debrand/Flash (FRD-L09C432B131). I followed these tutorials:
** WARNING: Backup your data cause this procedure wipes everything. **
** Do it at your own risk **
1) Unlock bootloader/Install TWRP/Root:
Followed this procedure: https://forum.xda-developers.com/honor-8/how-to/guide-unlock-bootloader-tested-root-t3443946
1.1) For this step I ran DCUnlocker because I coudn't get my unlock code from Huawei
1.2) Warning: Pay attention and install right version of TWRP, there are two links to download
1.3) Flash superSU
1.3.1) Download SuperSU
1.3.2) Flash it through TWRP
1.3.2.1) Power off and then press volume up + power (unplug USB)
1.3.2.2) Press "Install", select SuperSU ZIP and flash it. Now you're root
2) Debrand using SRKTool
Followed steps in this tutorial:
&t=310s
2.1) I skipped step to change build.prop, cause right after debrand I reflashed new ROM
2.2) Warning: Don't forget to enable USB debugging, grant access to your computer and grant access to SRKTool actions in SuperSU (it will ask for permission when SRK tries to change something). Make sure SuperSU is running
2.3) After reboot, just power off your phone and move to next step
3) Flash EU ROM
3.1) Make sure you copied ROM FRD-AL09C432B131 and unziped at folder dload on your SDCard
3.2) Press Volume UP + Volume Down + Power
3.3) At this point, your phone might enter in Huawei's recovery mode and start flashing new ROM. It takes about 5 ~ 10 minutes
Now. I realized even "right" ROM for similar model were still unstable. Actually nothing has changed. My next attempt: Nougat!
4) Update to Nougat
This step were simpler. Just execute Charles method and it works seamsless:
Charles Method: https://forum.xda-developers.com/showpost.php?p=69885525&postcount=11
Other responses for different variants: https://forum.xda-developers.com/honor-8/how-to/various-responses-charles-app-b360-t3541342
In my case (FRD-L09C432B131), the response I used was:
PS: did not lost any data on this upgrade but backup, just to make sure you won't loose anything.
Finally...
Now, phone is running FRD-L09C432B360 and seems to be very stable.
Please let me know if you have any questions and follow me on Twitter: emilioyn.
Click to expand...
Click to collapse
plz tell me how can i update mu FRD-L09 to nougat?
is there any complete video tutorial to upgrade FRD-L09? kindly help me...
Is anyone tried this method? I need confirmation , as i bought FRD-AL00 and want to debrand it to L09.
Thanks in advance.
Can it upgrade to B389? And use 2 sims sir?
ALASTOR1111 said:
Is anyone tried this method? I need confirmation , as i bought FRD-AL00 and want to debrand it to L09.
Thanks in advance.
Click to expand...
Click to collapse
I bought the phone AL00 with Noagat on board same as author wrote, but my experience was not good with it, same symptoms as in beginning of this post... After my trying to update to newer Noagat ROM, it was downloaded, flashed and phone could not boot.
So i had to made return to emui 4.1 by using rollback ROM and 3 buttons method. Same unstable work, i finished with going back to AL00 brand and ROM, now it works good, anyway AL00 ROMS multilingual and it is not hard to install all google environment on this ROM...
I have non of complaints on phone, exept i live in Serbia, and my mobile carrier is Telenor. LTE800 frequency on 4G its not supported on FRD-AL00. Only that....
TheHunterVN said:
Can it upgrade to B389? And use 2 sims sir?
Click to expand...
Click to collapse
But now, You got the dual sim function right?
ALASTOR1111 said:
Is anyone tried this method? I need confirmation , as i bought FRD-AL00 and want to debrand it to L09.
Thanks in advance.
Click to expand...
Click to collapse
Try this guide 100% working https://forum.xda-developers.com/honor-8/how-to/guide-honor-8-t3612873
Not for me, i'm on EMUI 5 (android 7.0) and its dual sim phone.
ALASTOR1111 said:
Not for me, i'm on EMUI 5 (android 7.0) and its dual sim phone.
Click to expand...
Click to collapse
Then try this https://forum.xda-developers.com/honor-8/how-to/guide-honor-8-to-frd-l19-t3632220
I am in China, My cell phone is AL00(EMUI5), after use SRKTOOL change oeminfo, at that time I thought the phone bricked.
Fortunately L09C432B131 firmware rescue my phone, and receive OTA update to B360.
After that, I did not receive any update, even place firmware(394/391/388) into dload.
How can I get an update, anyone help me?
heretic43 said:
I am in China, My cell phone is AL00(EMUI5), after use SRKTOOL change oeminfo, at that time I thought the phone bricked.
Fortunately L09C432B131 firmware rescue my phone, and receive OTA update to B360.
After that, I did not receive any update, even place firmware(394/391/388) into dload.
How can I get an update, anyone help me?
Click to expand...
Click to collapse
U faced the same issue like me. Sadly, i font know why and stayed in b360 for 2 months. Maybe stay in this rom 4ever )
TheHunterVN said:
U faced the same issue like me. Sadly, i font know why and stayed in b360 for 2 months. Maybe stay in this rom 4ever )
Click to expand...
Click to collapse
Maybe we should back to AL00, but I don't want to, just stay here...
heretic43 said:
Maybe we should back to AL00, but I don't want to, just stay here...
Click to expand...
Click to collapse
Me too. Do u have the stock AL00 rom?
TheHunterVN said:
Me too. Do u have the stock AL00 rom?
Click to expand...
Click to collapse
I have a TWRP backup B387, if back to AL00, restore backup or change omeinfo, which one should I choose?
heretic43 said:
I have a TWRP backup B387, if back to AL00, restore backup or change omeinfo, which one should I choose?
Click to expand...
Click to collapse
Honestly i dont know. Maybe another pro can help you. But can u upload ur backup plz? I will try to back to b387
TheHunterVN said:
Honestly i dont know. Maybe another pro can help you. But can u upload ur backup plz? I will try to back to b387
Click to expand...
Click to collapse
backup Partition (boot, cust, system) not include OEM, do you really want to try it?
Hello, i am trying to rebrand my new honor 8 from China. It's an FRD-AL10 with EMUI 5. Do i proceed with the steps as seen in the first post?
Edit: I've bricked it. Any suggestions?
This thread is a oneway ticket to the brick =(

Honor 8 AL00 update failed

Hello everyone,
I come to you because I am exhausted about an update that failed, and I have no idea to how to solve this problem although I tried innobracle things since almost two months (after-sales service, forums, test install firmwares ...) !
The problem is that I live in France and I bought a china/asiatic (?) version of the Honor 8 (FRD-AL00) instead of an european version (FRD-AL09) and so I received an update that was not compatible.
I was in Android 7.0 and EMUI 4.1 maybe... and this update soft-bricked the phone (eRecovery menu). Therefore I had to flash a ROM.
First I tried a lot of firmwares with Android 7 and Emui 5.0, but it did not work.
Then I tried to rollback the version. I used an intermediate file to prepare restoring (FRD-LXX EMUI5.0 + Android7.0 to EMUI4.1 + Android6.0) and I installed the firmware FRD-AL10C00B175_android6.0_emuie4.1 (so AL10 and not AL00). That was the first time that I succeed to install something, but that was a chinese version, and actually it does not work, I loop on the setup menu at the launch, when you have to choose the language.
Then I tried install again other firmwares but nothing works! All versions I tried not works "Incompatible with the current version" in eRecovery.
I search a lot on internet, on forums etc... and I did not find anything exept the fact that the original ROM was certainly an edited ROM, installed by the importer, which is an european version that can be installed on AL00.
A solution that worked for people who dit not rollback their version is to flash this edited ROM version (h t t p s : / / yadi.sk/d/_2GHOvkr3Num8B) , from this tutorial (h t t p s : / / translate.google.fr/translate?hl=fr&sl=fr&tl=en&u=http%3A%2F%2Fforum.frandroid.com%2Ftopic%2F261625-gros-probleme-mise-%C3%A0-jour-emui%2F%3Fpage%) (original tutorial : h t t p s : / / translate.google.fr/translate?sl=auto&tl=en&js=y&prev=_t&hl=fr&ie=UTF-8&u=http%3A%2F%2F4pda.ru%2Fforum%2Findex.php%3Fshowtopic%3D808947%26st%3D4960%23entry66154729&edit-text=&act=url).
I tried and it did not work because I did the rollback maybe.
So... do you have any solution?
I tried to install tens and tens of incompatible firmwares. Do you know what firmware version could work to restart my phone?? (For example I tried all Full-MF versions (h t t p s : / / boycracked.com/2017/06/15/official-huawei-honor-8-frd-al00-stock-rom-firmware/) and a lot in Android 6)
Another solution is to unlock the bootloader to force install the edited Rom Version, but I don't want to totally brick the phone...!! :crying:
So what are your recommendations?
Thank you in advance,
I really hope you can help me!
Hi , here you have roms , and guide instructions
https://romfirmware.com/2017/08/01/huawei-honor-8-frd-al00/
Good Luck
Teddy Lo said:
Hi , here you have roms , and guide instructions
link
Good Luck
Click to expand...
Click to collapse
Thanks for your response, but I have already tried to install all these full update you gave me in the link, and it doesn't work.
I just spent 40 minutes with Honor, to get a contact with the after sale service in China to get the original firmware version that was installed on the phone.
I think if I have the original version I could work.
Actually the only version that success to install (not saying that it's incompatible with the current version) is FRD-AL10C00B175_android6.0_emui4.1, but it doesn't work well (indeed it's for AL10 and not AL00 !)
Thanks for your response, but I have already tried to install all these full update you gave me in the link, and it doesn't work.
I just spent 40 minutes with Honor, to get a contact with the after sale service in China to get the original firmware version that was installed on the phone.
I think if I have the original version I could work.
Actually the only version that success to install (not saying that it's incompatible with the current version) is FRD-AL10C00B175_android6.0_emui4.1, but it doesn't work well (indeed it's for AL10 and not AL00 !)
hi,i am similiar with you.do you have solved it. if you have succeed.please reply to me.i really need your help!

I need to rollback (Honor 8), HELP!

I have a seemingly stupid but still annoying problem. As many of you know Android 8 + EMUI 8 came out this summer and I have updated my Honor8. Everything works well, even better (especially with regard to the battery) apart from a problem, quite annoying. I have seen that everyone around complains about the same problem, so it is clear that both a build bug and not a local problem.
Basically ... the bluetooth link with the multimedia system of my car doesn't work as it should, while it worked well with the 7.0.
Tracknames, music infos disappears, sometimes it connects regularly, starting the music, sometimes nothing happens, sometimes the music passes from the car speakers to smartphone (!!)... in short, manage the music in the car It has become a big problem!
I tried all possible options; reset pairing, reset bluetooth, clear cache, activate the developer options to control some low-level aspects of bluetooth, and finally installed Bluetooth Auto Connect which also has several advanced options. Nothing works. In the meantime an update of 8.0 has been released (mine is the buiold 521). The update came out in September ... maybe (MAYBE) this update fixes all bluetooth issues (but i don't have any detailed info about). Until today I have not received any updates and normally I check new version regularly every day. At this point I decided to return to Nougat!
And here the adventure begins!
I CANNOT IN ANY WAY do the downgrade.
What I tried:
- through HiSuite. The "back to previous version" option appears random (rarely); normally the program tells me "the system is up to date". Once appeared I tried to run the procedure, but after the decompression it gives me an error "error updating".
- by standard Rollback procedure. Using a microSD and putting the full version of Nougate in the dload folder. The installation starts but stops almost immediately with the same "update cannot be applied" error.
At this point I am desperate. I cannot update Oreo, I can't go back to Nougat and meanwhile the bluetooth still doesn't work with my car. Remember that before Oreo, everything worked very well!
What can I do? Can you help me?
Thank you
hi / i can help u / pls say me this:
your region(Ru/Eu/Cn.......)
your model( FRD-L09/L19/L04........)
Your Build number
and which build you upgrade to emui 8
m2relax said:
hi / i can help u / pls say me this:
your region(Ru/Eu/Cn.......)
your model( FRD-L09/L19/L04........)
Your Build number
and which build you upgrade to emui 8
Click to expand...
Click to collapse
Region: EU
Model: FRD-L09
Build: 8.0.0.521 (C432)
Previous Build: don't remember. It was Nougat, and I've upgraded around the first week of September. From that day I haven't received/applied any patch, because nothing appears until now.
This morning I've tried again with HiSuite. As usual it says I'm running the latest version and it doesn't offer any downgrade option .
Thelothian said:
Region: EU
Model: FRD-L09
Build: 8.0.0.521 (C432)
Previous Build: don't remember. It was Nougat, and I've upgraded around the first week of September. From that day I haven't received/applied any patch, because nothing appears until now.
This morning I've tried again with HiSuite. As usual it says I'm running the latest version and it doesn't offer any downgrade option .
Click to expand...
Click to collapse
dont worry/ do u change region of your phone past?
m2relax said:
dont worry/ do u change region of your phone past?
Click to expand...
Click to collapse
Never. And never jailbroken or rooted...
Thelothian said:
Never. And never jailbroken or rooted...
Click to expand...
Click to collapse
ok / pls do this work step by step :
1-Get Unlock Code for your Phone
2-Unlock your phone with Unlock Code
3-install TWRP recovery
4-after install TWRP notice me to send a file for u ( u must flash it from recovery TWRP )
5-after flashing u most install recovery stock
6-End and your problem is done! :fingers-crossed:
m2relax said:
ok / pls do this work step by step :
1-Get Unlock Code for your Phone
2-Unlock your phone with Unlock Code
3-install TWRP recovery
4-after install TWRP notice me to send a file for u ( u must flash it from recovery TWRP )
5-after flashing u most install recovery stock
6-End and your problem is done! :fingers-crossed:
Click to expand...
Click to collapse
I Heard TWRP doesn't work well on Oreo...
CurlyApple said:
I Heard TWRP doesn't work well on Oreo...
Click to expand...
Click to collapse
no if you use multi tools 8 for install twrp its work perfectly on oero
m2relax said:
no if you use multi tools 8 for install twrp its work perfectly on oero
Click to expand...
Click to collapse
The more you know...
Finally I've decide to try updating to 8.0.0.562. After a month of tries, fails (damn Huawei and his stupid update system), errors and a lot of other stupid things, I was finally able to update my Honor hoping the latest version will fix all the problems. It was a enormous waste of time (searching around internet)... but in the end I found a method described here: https://forum.xda-developers.com/huawei-p20-pro/help/p20-pro-bricked-t3868085#4And if you go ahead you should find the correct firmware link (on a Russian site). Although, IMHO, failing with the classic method was due to the impossibility or some bugs in the update system, to unpack the update files on sdcard. So the solution seems to be to leave both the zip and the unpacked folder.The problems with bluetooth remain, but I hope that now there is not to be crazy applying next updates. ATTENTION: the method above is NOT valid for rollback! If you try, you'll brick your Honor.
And finally I've taken an important decision... for me this is the last Huawei/honor device. Next time I'll go to another brand, with a serious update system.
Hello,
I have the same problem whit my honor, bluetooth lost signal random times, and my battery is faster get low, on android 7 i dont feel thees problems. Anyone have an idea how can i downgrade to nougat or marshmallow? My phone infos:
-FRD-L09 8.0.0.521(C432), I bought it in Hungary (i think its an EU modell), the phone have an unlocked bootloader, and flashed whit TWRP recovery
Who know the solution, pls reply here or, write me an email. Big thanks
scseke said:
Hello,
I have the same problem whit my honor, bluetooth lost signal random times, and my battery is faster get low, on android 7 i dont feel thees problems. Anyone have an idea how can i downgrade to nougat or marshmallow? My phone infos:
-FRD-L09 8.0.0.521(C432), I bought it in Hungary (i think its an EU modell), the phone have an unlocked bootloader, and flashed whit TWRP recovery
Who know the solution, pls reply here or, write me an email. Big thanks
Click to expand...
Click to collapse
flash this file with twrp and install stock recovery and do reset factor / finally use hisuite to rollback

Categories

Resources