This thread will begin with an Unboxing and Review video, I will update it with Root, Recovery, and Rom Guides, plus anything else having to do with the S5! Be sure to check back here often!
Mods Feel Free To Sticky! Hit the thanks button if you agree.
FINALLY Geohot Has Released A Root Method! TowelRoot!
Grab Root Here: http://forum.xda-developers.com/showthread.php?t=2783157
Root Method For OTA Update To NE9
Files For NE9 Root here: http://forum.xda-developers.com/verizon-galaxy-s5/general/how-to-root-g900vvru1ane9-t2836201
How To Install SafeStrap
Download Safestrap here: http://forum.xda-developers.com/showthread.php?t=2793891
Free Wifi Tether Guide No Root Required
Unboxing and Review
Water Test
Rear Facing 4K Video Test
Front Facing 1080p Video Test
Still no root or mods of any type, but the op has been updated with Front facing and Rear facing video tests
Free wifi tether guide added to the OP
What about those folks who have the verizon developer edition? I believe we could root and flash custom roms. I hope we could get support. My S5 DE has been sitting there since Monday :/
sinfulmatik said:
What about those folks who have the verizon developer edition? I believe we could root and flash custom roms. I hope we could get support. My S5 DE has been sitting there since Monday :/
Click to expand...
Click to collapse
.... why? You know vzw dev ed has been rooted. .. get after it man! Root and debloat til your heart is content and your cup is overflowing with greatness:thumbup:
beav3r
I think that the developer editions should have their own subforum. I'm tired of seeing their depressing post.
thewebsiteisdown said:
I think that the developer editions should have their own subforum. I'm tired of seeing their depressing post.
Click to expand...
Click to collapse
i so agree... depressed with my S5 here... just want a glimmer of hope.
OP Updated with Root Method Finally! Much thanks to @geohot
Just wanna let you guys know that you no longer need Foxfi for tethering. You can use X Tether from Xposed Module Repository: http://repo.xposed.info/module/com.dym.motoxtether to activate wireless tether. (Or in this case, mobile hotspot) Check out the pics for proof.
Thanks I'll look into this
Sent from my HTC6525LVW using XDA Free mobile app
Droid_Evo_8 said:
Just wanna let you guys know that you no longer need Foxfi for tethering. You can use X Tether from Xposed Module Repository: http://repo.xposed.info/module/com.dym.motoxtether to activate wireless tether. (Or in this case, mobile hotspot) Check out the pics for proof.
Click to expand...
Click to collapse
This absolutely works great.
Follow this thread to learn how to do it:
http://forum.xda-developers.com/google-nexus-5/help/how-to-tether-blocking-fix-t2544487
Droid_Evo_8 said:
Just wanna let you guys know that you no longer need Foxfi for tethering. You can use X Tether from Xposed Module Repository: http://repo.xposed.info/module/com.dym.motoxtether to activate wireless tether. (Or in this case, mobile hotspot) Check out the pics for proof.
Click to expand...
Click to collapse
Secondlaw said:
This absolutely works great.
Follow this thread to learn how to do it:
http://forum.xda-developers.com/google-nexus-5/help/how-to-tether-blocking-fix-t2544487
Click to expand...
Click to collapse
@Secondlaw - Were you saying the method you quoted from @Droid_Evo_8 works? Or were you stating that there was an easier method without using xposed? The method from your post doesn't seem to involve using the xposed mod but rather modifying a SQL file. Care to elaborate? Did this work without xposed and are you on a VZW non Dev GS5?
Sent from my SM-G900V using XDA Premium 4 mobile app
I installed the xPosed mod first and that didn't allow tethering. Once I modified the .DB, I was able to tether. I didn't do it the other way around.
I suppose someone else could edit the .DB file without the installed the xPosed mod and test.
I successfully enabled native hotspot with xposed and x tether but after disabling the hotspot (after testing) my connections to the web are mucked up until I reboot. A page will load about 3/4 then stop loading. Doesn't matter if on a WiFi connection or vzw.
Sent from my SM-G900V
OP updated with SafeStrap guide
Is it OK to uninstall exposed after I've run the script and achieved tether?
OP Updated with NE9 root guide!
owenbeals said:
OP updated with SafeStrap guide
Click to expand...
Click to collapse
Can SafeStrap be installed on a rooted NHA?
Thanks!
Related
The latest update on the LG servers! Not an OTA. D80120G, Kit Kat 4.4.2. Here's a link to the kdz file on their server. You can use the LG Mobile Support Tool to upgrade. After putting your phone into download mode (holding volume up while plugging in usb), go into the options menu and selected Upgrade Recovery. You will need to have the latest LG USB drivers installed. Unfortunately, the Mac drivers do not support software upgrades. Towelroot does not support D80120G yet, but Stump Root was able to use brute force and root 20G. You can find Stump Root here
D80120G KDZ File
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW040116432109876543213/D80120G_00.kdz
For D80120E: I lost root and recovery when I updated, but was able to re-root with towelroot. Here's a link to their website. Then I installed and ran AutoRec to install TWRP, then flashed Cloudyfa's kernel v1.3 to enable Knock Code.
D80120E KDZ File
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW469006432109876543213/D80120E_00.kdz
http://oceanhost.eu/g92b383v7jqe/D80120E_00.kdz.htm mirror - thanks hyelton!
D80120A KDZ File
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW168295432109876543213/D80120A_00.kdz
http://storagecow.eu/index.php?dir=Xda/LG+G2/Stock/T-Mobile+G2/ mirror - thanks hyelton!
LG Mobile Support Tool...Thanks CollinFX45 for the link!
http://csmg.lgmobile.com:9002/client/app/B2CAppSetup.exe
Latest drivers from LG (as of 7/2/14)
http://tool.xcdn.gdms.lge.com/dn/downloader.dev?fileKey=UW00120120425
You can also download 4.4.2 through the PC Suite. Thanks elzero26 for pointing this out!
If you are having issues with updating your phone with the Support Tool or the PC Suite, you may have to update it following the directions from the link below.
Alternate method for updating software
http://forum.xda-developers.com/showthread.php?t=2432476
As always, flash at your own risk.
Howie Dub said:
Fresh off the LG servers! Not an OTA. D80120A, Kit Kat 4.4.2. Here's a link to the kdz file on their server. I used the LG Mobile Support Tool to upgrade. Hope root comes soon
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW168295432109876543213/D80120A_00.kdz
View attachment 2603833
Click to expand...
Click to collapse
Try Rooting with this and see if it work :/
Im d/l now, after it installs im going to try kingoapp.com, unless someone else wants to try before me....
Art? Quick review pls
Can you see if tap to pay is available?
Sent from my LG-D800 using Tapatalk
derekedw said:
Can you see if tap to pay is available?
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
I was going to ask same thing so I second that
stevessvt said:
Im d/l now, after it installs im going to try kingoapp.com, unless someone else wants to try before me....
Click to expand...
Click to collapse
Definitely let us know. I'm eager for some Kit Kat goodness, but I can't live without my root.
hamad138 said:
Art? Quick review pls
Click to expand...
Click to collapse
No art in dev options Looks the same except for the icons in the notification bar being kit kat white. Feels smoother. Knock Knock feels more responsive.
derekedw said:
Can you see if tap to pay is available?
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
how do i check if tap to pay is available?
Howie Dub said:
No art in dev options Looks the same except for the icons in the notification bar being kit kat white. Feels smoother. Knock Knock feels more responsive.
how do i check if tap to pay is available?
Click to expand...
Click to collapse
Install the Google Wallet APK
Should be a setting under NFC too
Sent from my LG-D800 using Tapatalk
derekedw said:
Can you see if tap to pay is available?
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
SolsticeZero said:
Install the Google Wallet APK
Click to expand...
Click to collapse
derekedw said:
Should be a setting under NFC too
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
Google Wallet says tap to pay is not available
Howie Dub said:
Google Wallet says tap to pay is not available
Click to expand...
Click to collapse
I wonder if T-Mobile had LG disable it to push their Isis TTP service. If that's the case, perhaps it can be modded back in, as tap to pay is part of the Kit Kat framework.
So the OTA should be out anyday now, right?
I know the d802 users are about to sh$# bricks lol
Sent from my LG-D801 using xda app-developers app
I thnk it sucks that despite Google making tap to pay available to the masses with kitkat, carriers are allowed to have it removed. Restraint of trade much?
---------- Post added at 11:02 AM ---------- Previous post was at 11:02 AM ----------
can you install this without a wipe?
gunnyman said:
I thnk it sucks that despite Google making tap to pay available to the masses with kitkat, carriers are allowed to have it removed. Restraint of trade much?
---------- Post added at 11:02 AM ---------- Previous post was at 11:02 AM ----------
can you install this without a wipe?
Click to expand...
Click to collapse
I think it sucks that carriers are allowed to block out and taint parts of an OS, an open-source OS at that, just because they have people by the balls in terms of contracts and subsidies. Tethering? Free, and part of Android, but try telling a carrier that. Tap-to-Pay? "Oh but ISIS is so much better!," says carriers. "You can use that while we install CIQ to track every movement that you make!"
Ahem...sorry about that. /rant
Wait for this thread to close
even after so many warnings u make new threads
Sent from my LG-D802 using Tapatalk
I'm just waiting on someone to port these over to Verizon.
Almost to the point of trying to root guys, its installed, but updating a lot of apps now.
SolsticeZero said:
I wonder if T-Mobile had LG disable it to push their Isis TTP service. If that's the case, perhaps it can be modded back in, as tap to pay is part of the Kit Kat framework.
Click to expand...
Click to collapse
I know there's code in there for tap to pay because using a shortcut creator, you can see activities, but it appears the UI to make changes is gone or hidden. Having root, there may be a SQL change that can be made to turn it on or point it to google wallet.
all kudos goes to the legendary people that coded http://www.towelroot.com/
mega mirror: link
for a second opinion, here is the LH post
confirmed working with LG G3 F400K, i was able to confirm root with chainfire superSU as well as:
the latest xposed framework
titanium backup
snowsire said:
all kudos goes to the legendary people that coded http://www.towelroot.com/
mega mirror: link
for a second opinion, here is the LH post
confirmed working with LG G3 F400K, i was able to confirm root with chainfire superSU as well as:
the latest xposed framework
titanium backup
Click to expand...
Click to collapse
Maybe is not the thread to ask, but seeing that you have XPOSED working already, I wanted to know, how most of usual XPOSED mods are working for you? GravityBox and Tinted Statusbard for example, how are they working on your G3? I'm really used to them on my Nexus 5 and since I will probably get a G3 when an Internarional version is released in US I'm really interested in your answers!
Thanks!
pispuso said:
Maybe is not the thread to ask, but seeing that you have XPOSED working already, I wanted to know, how most of usual XPOSED mods are working for you? GravityBox and Tinted Statusbard for example, how are they working on your G3? I'm really used to them on my Nexus 5 and since I will probably get a G3 when an Internarional version is released in US I'm really interested in your answers!
Thanks!
Click to expand...
Click to collapse
gravitybox is working excellently , all my mods i used on the htc one m7 are running without issues. I cant say i ever used " Tinted Statusbard " before, but xposed misc modules / downloads searches works as you would expect, run the root method above, install xposed, and enjoy.
the one caveat i guess i should mention is that no custom recovery / backup has been run. So, install at your own risk,
snowsire said:
gravitybox is working excellently , all my mods i used on the htc one m7 are running without issues. I cant say i ever used " Tinted Statusbard " before, but xposed misc modules / downloads searches works as you would expect, run the root method above, install xposed, and enjoy.
the one caveat i guess i should mention is that no custom recovery / backup has been run. So, install at your own risk,
Click to expand...
Click to collapse
Great! Thanks for answering!
I don't have a G3 yet so I guess by the time I get one there will be a custom recovery that works.
Thanks again!
Be getting my G3 in a week or so international version do you think this will work on international
Hey guys I have just rooted my G3 with towelroot, when LG software updates come up I press update and it always say cannot update due to phone being rooted. Is that normal? my first time rooting a phone.
Gravediggaz said:
Hey guys I have just rooted my G3 with towelroot, when LG software updates come up I press update and it always say cannot update due to phone being rooted. Is that normal? my first time rooting a phone.
Click to expand...
Click to collapse
Yes that is correct.
Works on international G3 Model 855 thanks
Hi guy's
I just got my G3 yesterday and I want to root it but it's still currently on 4.4.2. Do you think it's worth just waiting for 4.4.4 and then rooting?
I can root using towelroot but it's not still possible to install a custom recovery... right?
Diesel779 said:
Hi guy's
I just got my G3 yesterday and I want to root it but it's still currently on 4.4.2. Do you think it's worth just waiting for 4.4.4 and then rooting?
Click to expand...
Click to collapse
Maybe the 4.4.4 update is a security****patch to block towelroot
Mennooo said:
Maybe the 4.4.4 update is a security****patch to block towelroot
Click to expand...
Click to collapse
Haha, yeah maybe. Off topic but has anyone enabled ART on their G3?
Diesel779 said:
Haha, yeah maybe. Off topic but has anyone enabled ART on their G3?
Click to expand...
Click to collapse
yeah I have on D855 all working tickerty boo
Works like a charm
Diesel779 said:
Haha, yeah maybe. Off topic but has anyone enabled ART on their G3?
Click to expand...
Click to collapse
Yeah, I've got it enabled also on a d855, is all working but the difference between ART and dalvik is minimal, haven't really noticed anything maybe a couple less stutters switching between various apps
Does towelroot wipe your phone? Thanks!
mobiilisti said:
Does towelroot wipe your phone? Thanks!
Click to expand...
Click to collapse
No does not wipe phone its a apk file load it click it & your phone is rooted so u can use apps that need su permission
snowsire said:
all kudos goes to the legendary people that coded http://www.towelroot.com/
mega mirror: link
for a second opinion, here is the LH post
confirmed working with LG G3 F400K, i was able to confirm root with chainfire superSU as well as:
the latest xposed framework
titanium backup
Click to expand...
Click to collapse
What does ''untethered root'' means?
I have three questions to you guys who already rooted the G3 with towelroot:
Does a factory reset unroot the G3 again and makes possible to install OTA Updates again? How can I perfom the factroy reset without a custom recovery? Do I have to install SuperSU (or something equivalent) after using towelroot?
Indurus said:
I have three questions to you guys who already rooted the G3 with towelroot:
Does a factory reset unroot the G3 again and makes possible to install OTA Updates again? How can I perfom the factroy reset without a custom recovery? Do I have to install SuperSU (or something equivalent) after using towelroot?
Click to expand...
Click to collapse
+1 on this.
I'm new to LG devices and wasn't sure how to get OTA updates after rooting.
Hi everyone, I'm going to post a separate thread about this. None other than @jrkruse has once again made us a stock modified rom for the Verizon galaxy S5. Lets go over the basics shall we?
IMPORTANT INFORMATION
You MUST have an unlocked bootloader in order for root to work!(Or you may/probably will bootloop your phone)
This rom uses an updated bootloader, but it is not needed, you may flash this over the PD1 and PF4 bootloader!
If you wish to update your bootloader or need to unlock, please goto my thread
http://forum.xda-developers.com/ver...t/rd-unlocking-galaxys-s5-bootloader-t3337909
Features
DEODEXED
Knox Removed!
Amazon Bloat Removed
Verizon Bloat Removed
Rooted!
Hotspot Fix!
Installation
Please read everything Above before continuing
Well you continued so I assume you understand what you are doing
One last time, you MUST HAVE AN UNLOCKED BOOTLOADER TO FLASH
You also MUST BE ON PD1+ Bootloaders!
You need to download the ROM from here
https://www.androidfilehost.com/?fid=312968873555004789
Flash it inside TWRP or Flashfire or Safestrap(Or whatever method you may be using to flash roms)
I recommend against Dirty flashing however if you are coming from a 6.0.1 ROM you probably are fine
Wipe Cache/Dalvik
Reboot!
You should be done!
Extras
If you would like xposed, this framework should work
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
Thanks to @wanam and @rovo89
SuperUser Provided by @Chainfire (I Assume lol)
Screen overlay issues can be corrected by this
http://forum.xda-developers.com/attachment.php?attachmentid=3910855&d=1477064365
Useless Info
Pokemon go won't work, get over it!
Android Pay also won't work!
Really Beta Stuff
If you wish to try and play Pokemon Go or use android pay, the following may work
http://forum.xda-developers.com/apps/supersu/suhide-t3450396
You CANNOT use xposed unless you use a systemless xposed compiled for our Samsung devices @wanam usually does a good job at that)
Expect bootlooping or problems!
Reserved Cuz
@jrkruse Did I mess anything up? I'm on my phone and rushing and busy
GeTex said:
Reserved Cuz
@jrkruse Did I mess anything up? I'm on my phone and rushing and busy
Click to expand...
Click to collapse
Nope maybe just mention it has the hotspot fix
hi
I'm using Resurrection Remix rom now with PB1_Bootloader .
Do I need go back to PB1 rom and update my bootloader to flash This rom?
Normally no bootloader does not need to be updated
Sent from my SM-G900V using Tapatalk
---------- Post added at 04:32 PM ---------- Previous post was at 04:32 PM ----------
I have run a kitkat bootloader on mm rom before
Sent from my SM-G900V using Tapatalk
"You also MUST BE ON PD1+ Bootloaders"
That's what @GeTex said And put a link to update Bootloader That's why I asked this question
Thanks
ـــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــ
well ..... i flashed This rom and i stuck in samsung logo for 1 minute and mobile boot again to TWRP Recovery.
do i need to MM Kernel?
sjla said:
"You also MUST BE ON PD1+ Bootloaders"
That's what @GeTex said And put a link to update Bootloader That's why I asked this question
Thanks
Click to expand...
Click to collapse
I said it because yes, you have to, if you don't hard keys and wifi will not work
theres a difference between running a MM rom on a Kitkat bootloader and running a STOCK SAMSUNG MM ROM on a kitkat bootloader
custom roms don't care as much, but stock do
Well forget what I said refer to the wisdom of the ROM developers I'm just a noob flasher
Sent from my SM-G900F using Tapatalk
sjla said:
"You also MUST BE ON PD1+ Bootloaders"
That's what @GeTex said And put a link to update Bootloader That's why I asked this question
Thanks
ـــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــ
well ..... i flashed This rom and i stuck in samsung logo for 1 minute and mobile boot again to TWRP Recovery.
do i need to MM Kernel?
Click to expand...
Click to collapse
i was on remix also and flashed the rom and end it didnt get pass the samsung logo, but i followed the steps at the end of method 1 here and it worked.
http://forum.xda-developers.com/ver...t/rd-unlocking-galaxys-s5-bootloader-t3337909
mike2550 said:
i was on remix also and flashed the rom and end it didnt get pass the samsung logo, but i followed the steps at the end of method 1 here and it worked.
http://forum.xda-developers.com/ver...t/rd-unlocking-galaxys-s5-bootloader-t3337909
Click to expand...
Click to collapse
Thanks
Any reason the Android Pay and Pokemon Go apps don't work with this ROM? I don't plan on playing Pokemon Go but might use Android Pay and just curious.
drewcu said:
Any reason the Android Pay and Pokemon Go apps don't work with this ROM? I don't plan on playing Pokemon Go but might use Android Pay and just curious.
Click to expand...
Click to collapse
I don't know for sure, but my bet is it because the programs check something for security/anticheat reasons, and since we are rooted and unlocked it fails and won't work. That's just a guess though.
Sent from my SM-G900V using Tapatalk
Pokemon go uses safetynet api that checks for root
Sent from my SM-G900F using Tapatalk
Kaliaila said:
I don't know for sure, but my bet is it because the programs check something for security/anticheat reasons, and since we are rooted and unlocked it fails and won't work. That's just a guess though.
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
Wasn't sure if it had something to do with the fact that some of the bloatware was removed or what you are saying. I am on rooted, deodexed, modded PF4 already but never tried either app so for all I know I cannot use them already on my current ROM.
EDIT: And now I see what happens on PF4 with Samsung Pay. The app cannot verify the Android software when adding a card, rendering Android Pay useless. Oh well.
I am having screen overlay detected issue with GravityBox but the rom awesome .
Thank you @GeTex
One last thing can you Please remove verizon screen
sjla said:
I am having screen overlay detected issue with GravityBox but the rom awesome .
Thank you @GeTex
One last thing can you Please remove verizon screen
Click to expand...
Click to collapse
Try this and see if it works for screen overlay
View attachment Fixed_Google_Package_Installer.zip
drewcu said:
Any reason the Android Pay and Pokemon Go apps don't work with this ROM? I don't plan on playing Pokemon Go but might use Android Pay and just curious.
Click to expand...
Click to collapse
This will allow android pay to work
http://forum.xda-developers.com/apps/supersu/suhide-t3450396
jrkruse said:
This will allow android pay to work
http://forum.xda-developers.com/apps/supersu/suhide-t3450396
Click to expand...
Click to collapse
Last I checked SuHide was a bit of a disaster and had alot of issues(especially for xposed users since I'm not aware of a systemless xposed version for our Special Samsung ART runtime and atop that, I thought it bootlooped my S5 during testing.
GeTex said:
Last I checked SuHide was a bit of a disaster and had alot of issues(especially for xposed users since I'm not aware of a systemless xposed version for our Special Samsung ART runtime and atop that, I thought it bootlooped my S5 during testing.
Click to expand...
Click to collapse
I use it on s7 and it works fine but I don't use xposed. I used an earlier version on s5 and it worked but then again I didn't use xposed framework. So I guess the best would be just read through the suhide thread and see if latest versions work with xposed. By the way I meant to ask earlier, how is everything going. Good I hope. Thanks for posting rom
jrkruse said:
I use it on s7 and it works fine but I don't use xposed. I used an earlier version on s5 and it worked but then again I didn't use xposed framework. So I guess the best would be just read through the suhide thread and see if latest versions work with xposed. By the way I meant to ask earlier, how is everything going. Good I hope. Thanks for posting rom
Click to expand...
Click to collapse
Things are a bit of mayhem, stuff not working, computers breaking, limited internet. Always something. Anyhow, @Chainfire said it doesn't work with xposed, only systemless
I have seen quite a few questions about this in the other threads so I though I would go ahead and post my solution.
This was tested on my FRD-L04 running the stock *b162 firmware, rooted with magisk v11.1, and using the $40 straight talk "unlimited" plan. I cannot promise or guarantee that this method will work with any other model or firmware.
First, If you are using magisk, flash the module I will link to below. If you are NOT using magisk, you will have to modify your build.prop manually. You will need to add the line
"net.tethering.noprovision=true"
Second, with a root enabled file browser, you need to go into the /system/app/ folder and delete the folder named "ATTEntitle"
Reboot and tether should be working fine!
https://drive.google.com/file/d/0BwRZfEQbEy6FcThtTzlvMTZhbVU/view?usp=drivesdk
wraithewok said:
I have seen quite a few questions about this in the other threads so I though I would go ahead and post my solution.
First, If you are using magisk, flash the module I will link to below. If you are NOT using magisk, you will have to modify your build.prop manually. You will need to add the line
"net.tethering.noprovision=true"
Second, with a root enabled file browser, you need to go into the /system/app/ folder and delete the folder named "ATTEntitle"
Reboot and tether should be working fine!
https://drive.google.com/file/d/0BwRZfEQbEy6FcThtTzlvMTZhbVU/view?usp=drivesdk
Click to expand...
Click to collapse
I did what u said but I don't have the ATTentitle folder and tethering is still locked.
EDIT
Are you on EMUI 5? I didn't think it was possible to install magisk on EMUI 5. Is tethering included in your Straighttalk Plan? I am on 5Gb Data+Talk+Text on L04 rooted with TWRP 3.1.0-0
Thank!
wraithewok said:
I have seen quite a few questions about this in the other threads so I though I would go ahead and post my solution.
First, If you are using magisk, flash the module I will link to below. If you are NOT using magisk, you will have to modify your build.prop manually. You will need to add the line
"net.tethering.noprovision=true"
Second, with a root enabled file browser, you need to go into the /system/app/ folder and delete the folder named "ATTEntitle"
Reboot and tether should be working fine!
https://drive.google.com/file/d/0BwRZfEQbEy6FcThtTzlvMTZhbVU/view?usp=drivesdk
Click to expand...
Click to collapse
Thanks for moving this out of TWRP. What version of the OS (full vers. # and also please, the hardware model and straight talk plan)?
I've been looking at it but can only do so for Nougat via CM 14.1 code, which until someone tells me it works (Never tried it), I'm not sure it's the right place to look, but with Honor's crappy support and zero source policy, it's what we have. Also, are you rooted? Stock? Anything you can tell about the phone and it's setup would be helpful.
Thanks.
*edited original post*
Thanks for adding the details. These guys are only interested in 7.0 (Nougat). I've used "net.tethering.noprovision=true" for years and it's always worked especially back in the days before hotspot was a part of so many plans. I've got a no hotspot ATT cheap go-phone plan on my Honor 8 FRD-L04 Nougat and it has no tethering in the plan, but tethering works fine from my phone. Gotta be a combo of emui 5/Nougat-like and straight talk's policies.
hachamacha said:
Thanks for adding the details. These guys are only interested in 7.0 (Nougat). I've used "net.tethering.noprovision=true" for years and it's always worked especially back in the days before hotspot was a part of so many plans. I've got a no hotspot ATT cheap go-phone plan on my Honor 8 FRD-L04 Nougat and it has no tethering in the plan, but tethering works fine from my phone. Gotta be a combo of emui 5/Nougat-like and straight talk's policies.
Click to expand...
Click to collapse
I am able to Tether with "Wifi Tether Router App" from googleplay and the remove/reinsert SIM card trick with native tethering.
Still no working tether EVEN with root on EMUI 5.0 android Nugut for stright talk at*t
anyone ?
Serpentdrago said:
Still no working tether EVEN with root on EMUI 5.0 android Nugut for stright talk at*t
anyone ?
Click to expand...
Click to collapse
Nope, no known solution yet
I have tethering working on straight talk. I am also on L04 385. What I did was root then I installed magisk, then I installed the tethering magisk module. It works perfectly.
I am on b380 now with magisk. I can come firm that the tethering magisk module works!
crash6x86 said:
I have tethering working on straight talk. I am also on L04 385. What I did was root then I installed magisk, then I installed the tethering magisk module. It works perfectly.
Click to expand...
Click to collapse
How did u upgrade to 385? I didn't find any thread for L04. I tried FF but I get a dwload error even when I set the proxy
Sent from my FRD-L04 using Tapatalk
It came as an ota.
crash6x86 said:
It came as an ota.
Click to expand...
Click to collapse
Are u in USA on Straighttalk and L04?
Sent from my FRD-L04 using Tapatalk
Yes I am
---------- Post added at 07:51 PM ---------- Previous post was at 07:48 PM ----------
cococchio said:
Are u in USA on Straighttalk and L04?
Click to expand...
Click to collapse
It may be because I was on the beta trial
crash6x86 said:
Yes I am
---------- Post added at 07:51 PM ---------- Previous post was at 07:48 PM ----------
It may be because I was on the beta trial
Click to expand...
Click to collapse
Thanks a lot for pointing to Magisk!
For all the folks that like me cannot update to B385 yet.
Magisk module works also on B360 but it requires a modified boot
https://forum.xda-developers.com/honor-8/development/kernel-frd-l04-hybrid-stock-kernel-t3606681
crash6x86 said:
I have tethering working on straight talk. I am also on L04 385. What I did was root then I installed magisk, then I installed the tethering magisk module. It works perfectly.
Click to expand...
Click to collapse
I too am on a L04, but i was under the impression that 360 was the highest you could successfully update the L04?? Please let me know how you were able to successfully update
ETA sorry I didn't see where u had already posted that u were a member of the beta program... Im jelly!! =P
Sent from my HUAWEI FRD-L04 using XDA Labs
---------- Post added at 10:11 AM ---------- Previous post was at 10:07 AM ----------
cococchio said:
Thanks a lot for pointing to Magisk!
For all the folks that like me cannot update to B385 yet.
Magisk module works also on B360 but it requires a modified boot
https://forum.xda-developers.com/honor-8/development/kernel-frd-l04-hybrid-stock-kernel-t3606681
Click to expand...
Click to collapse
I am using the hybrid kernel modified boot quoted above and it does indeed have proper loop support and therefore magisk compatible.
Also fixed a cpl of the other bugs associated with B360 such as the ok Google listening microphone bug that was present when the sound recorder, camera, or another app tried to use the audio recorder
Sent from my HUAWEI FRD-L04 using XDA Labs
Does this work with simple mobile on honor 8??
I'm not sure why I've not seen this posted here. Any ways here's the link to the 6t thread where this was originally shared. https://forum.xda-developers.com/oneplus-6t/themes/exposed-pixel-display-oneplus-6t-t3947995/page47#post80204620
My screens :
My post from original thread:
To whom it may concern: Yes the test version the dev posted works for the TMobile 7pro. Yes all features work. For me battery drain is negligible with DC dimming turned on. I still get over 7hr SOT even though gsm shows doze never activates.
It's been mentioned weeks ago mate on various threads.
The only thing is that you have to be rooted and exposed installed.
hallo dare said:
It's been mentioned weeks ago mate on various threads.
Click to expand...
Click to collapse
Thanks Bro. I don't remember seeing it as I don't follow many threads because I'm stocked rooted maybe. I only shared because I'm highly impressed with the functionality and the battery drain. If it's not useful I'll ask for the thread to be deleted.
mookiexl said:
My post from original thread:
To whom it may concern: Yes the test version the dev posted works for the TMobile 7pro. Yes all features work. For me battery drain is negligible with DC dimming turned on. I still get over 7hr SOT even though gsm shows doze never activates.
Click to expand...
Click to collapse
Mainly because I can't search from mobile (get a 404 error) but any way to make a magisk module of this? Something that won't trip safety net, as I rely on it for travel and payment stuff (I'm rooted with magisk ofc)
manor7777 said:
Mainly because I can't search from mobile (get a 404 error) but any way to make a magisk module of this? Something that won't trip safety net, as I rely on it for travel and payment stuff (I'm rooted with magisk ofc)
Click to expand...
Click to collapse
Using edxposed won't trip safety net
I used this, but Snapchat banned me for 12h,12h,24h and 48h.. so removed xposed.
hallo dare said:
Using edxposed won't trip safety net
Click to expand...
Click to collapse
I pass safety net and am still able to use Android Pay using edxposed.
He should have made a magisk module, not exposed....
The battery drain was very high on my oneplus 7 pro eu. I will test it one time more
---------- Post added at 11:33 AM ---------- Previous post was at 11:15 AM ----------
Is edxposed compatible with android q?
matze19999 said:
He should have made a magisk module, not exposed....
Click to expand...
Click to collapse
Agreed, xposed is a pain to use.
I will not use xposed, but magisk modules works a Treat...
I never could get it to work. Even asked in the thread but no one replied.
mookiexl said:
I'm not sure why I've not seen this posted here. Any ways here's the link to the 6t thread where this was originally shared. https://forum.xda-developers.com/oneplus-6t/themes/exposed-pixel-display-oneplus-6t-t3947995/page47#post80204620
My screens :
Click to expand...
Click to collapse
How did you get it to work? I can't ever get it to work no matter what I do. Can you share your steps if you haven't already done so?
The_Keeper86 said:
I never could get it to work. Even asked in the thread but no one replied.
Click to expand...
Click to collapse
Search the thread for the Tmobile variant. I'm using the test build that the official Dev posted.
mookiexl said:
Search the thread for the Tmobile variant. I'm using the test build that the official Dev posted.
Click to expand...
Click to collapse
Thanks! I somehow missed that. Working good so far!
Now if I can only get it to display in 12 hour.
This is the link posted in the thread as a test build for the t-Mobile variant because the official app didn't work. There has since been a another official release that I haven't tested but other users have confirmed it working. Just follow the instructions as postedhttps://drive.google.com/file/d/1UcXBiCWw4q4IkWZhqy1M_YoAZO2Bqvmt/view
Install the opAOD app from the link above
Install Edxposed installer apk https://www.coolapk.com/apk/com.solohsu.android.edxp.manager (YES YOU CAN FIND IT ELSE WERE BUT I ACTUALLY USE COOL APK)
Magisk:
Install Riru core(don't reboot)
Install Riru Edxposed )Reboot)
Open the edxposed installer app and find the modules tab
Click the activate tab and reboot
That's all I did and it was immediately working upon reboot.
mookiexl said:
This is the link posted in the thread as a test build for the t-Mobile variant because the official app didn't work. There has since been a another official release that I haven't tested but other users have confirmed it working. Just follow the instructions as postedhttps://drive.google.com/file/d/1UcXBiCWw4q4IkWZhqy1M_YoAZO2Bqvmt/view
Install the opAOD app from the link above
Install Edxposed installer apk https://www.coolapk.com/apk/com.solohsu.android.edxp.manager (YES YOU CAN FIND IT ELSE WERE BUT I ACTUALLY USE COOL APK)
Magisk:
Install Riru core(don't reboot)
Install Riru Edxposed )Reboot)
Open the edxposed installer app and find the modules tab
Click the activate tab and reboot
That's all I did and it was immediately working upon reboot.
Click to expand...
Click to collapse
Awesome thanks. Is there a way to change it to 12 hour and also is it possible to schedule the aod to come on at a certain time? Bi know you aren't the developer but figured I'd ask anyway.
The_Keeper86 said:
Awesome thanks. Is there a way to change it to 12 hour and also is it possible to schedule the aod to come on at a certain time? Bi know you aren't the developer but figured I'd ask anyway.
Click to expand...
Click to collapse
No for 12 hour for now. As far as turning on at certain times that is also a no but you can disable with a simple tap. With that I would suggest setting regular alarms to just touch the phone to disable and enable AOD, or somehow using Tasker which I have no patience to do, to set active times. My recommendation is to just tap the screen to disable when you don't need it. It's a tool after all and not a gimmicky feature