I thought the audio files could use some volume boost to better show off these sexy speakers
These are the default audio files which have been modded. This is NOT a system wide audio hack. For that check out Viper4Android.
This will overwrite files on /system/media/audio partition and should be flashed in recovery only.
Audio Bump to Full Dynamic Range (No crackling sound)
Dropbox - https://www.dropbox.com/s/u7iruechb4l6iiz/M8_Default_Sounds_Full_Dynamic_Range.zip
Audio Bump to 150%
Dropbox - https://www.dropbox.com/s/j36hma4xei7vdy2/M8_Default_Sounds_AudioBoost_150perc.zip
Audio Bump to 200%
Dropbox -https://www.dropbox.com/s/djwq6tjyf123mfy/M8_Default_Sounds_AudioBoost_200perc.zip
Revert back to Stock
Dropbox - https://www.dropbox.com/s/dqyeaxi54k5tbbk/M8_Default_Sounds_Revert.zip
Sweet downloading now
Dam that's loud nice one
Nice work, definitely delivers... sooner then expected, too.
Sent from my ViperOne M8 using xda app-developers app
I flashed and it said something about update binary. The sound effect changed for the touch sounds but I don't notice anything being louder.
DELETED!
hmmm...didn't change anything...
Psych0t1c20 said:
I flashed and it said something about update binary. The sound effect changed for the touch sounds but I don't notice anything being louder.
Click to expand...
Click to collapse
Crazypinoy9 said:
hmmm...didn't change anything...
Click to expand...
Click to collapse
Which recovery are you both using? This is tested and working fine with TWRP
Sent from my HTC One_M8 using XDA Premium 4 mobile app
v-b-n said:
Which recovery are you both using? This is tested and working fine with TWRP
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'm on TWRP 2.7.0.2
v-b-n said:
Which recovery are you both using? This is tested and working fine with TWRP
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Philz
Flashed it with Philz but didn't really notice any noticeable boost in sound after. My music still sounded more or less like it did before the flash with the volume cranked up to the max.
It's not to make your speakers louder but it makes your audio files themselves louder as in stock ringtones, alarms, ui, etc.
Sent from my HTC One_M8 using xda app-developers app
shag04 said:
It's not to make your speakers louder but it makes your audio files themselves louder as in stock ringtones, alarms, ui, etc.
Sent from my HTC One_M8 using xda app-developers app
Click to expand...
Click to collapse
Thanks.
Would have been awesome if music files can get a little boost as well.
jwsm said:
Thanks.
Would have been awesome if music files can get a little boost as well.
Click to expand...
Click to collapse
I also flashed in TWRP but it didn't do anything for me.
Not sure why some are saying no difference ... revert to stock play any one tone at full volume, then flash the mod and play again ... if you dont feel the difference, then this mod is not necessary for you anyways
Added new edited set ...this one has been bumped to Full Dynamic Range without causing any sound crackling (on some tones with 150%) on the speakers.
Think of it like 120% volume bump but all sounds stay withing a decibel limit to prevent crackling.
I think its better than the 150%
v-b-n said:
Added new edited set ...this one has been bumped to Full Dynamic Range without causing any sound crackling (on some tones with 150%) on the speakers.
Think of it like 120% volume bump but all sounds stay withing a decibel limit to prevent crackling.
I think its better than the 150%
Click to expand...
Click to collapse
Downloading now
So, just to confirm, this only increases the audio output on UI, system notification and ring tones but will not boost the sound volume when playing music through the speakers, correct?
jwsm said:
Downloading now
So, just to confirm, this only increases the audio output on UI, system notification and ring tones but will not boost the sound volume when playing music through the speakers, correct?
Click to expand...
Click to collapse
Yes that's correct.. These are edited audio files nothing more
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Flashed with CWM didn't change nothing said something about Binaries but flashed properly but no change in sounds with notifications
v-b-n said:
Added new edited set ...this one has been bumped to Full Dynamic Range without causing any sound crackling (on some tones with 150%) on the speakers.
Think of it like 120% volume bump but all sounds stay withing a decibel limit to prevent crackling.
I think its better than the 150%
Click to expand...
Click to collapse
Thanks mate! Flashed the 120%, not sure if I notice a difference, but I'll trust you!
:highfive:
Maedhros said:
Thanks mate! Flashed the 120%, not sure if I notice a difference, but I'll trust you!
:highfive:
Click to expand...
Click to collapse
Ha ha.. I didn't get time yesterday.. Will update op today with the waveform screenshots that will show what I have done to the sounds
Related
Just a heads up to those who may not know, there is a Beats Audio/xLoud mod/port on the board and it works on the Atrix 2. Beats adds a deeper, cleaner bass and cleans up the mids/highs too. xLoud is a Sony Ericsson thing, it basically boosts the overall volume of ur audio. I just flashed this mod to my phone and holy ****, huge difference! I had to turn all my volumes down media/ringer/alarms. My good cans are packed (moving this weekend) so no testing with them yet but after hearing the difference I just heard with only the phone speaker I'm expecting to be very happy.
Sent from my MB865 using XDA App
Here's the link to the thread for it....make sure to d/l and flash the 3.2.12 one.
http://forum.xda-developers.com/showthread.php?t=1525226
Sent from my MB865 using XDA App
where is the xloud .zip file?
Whoa - déjà vu!
xLoud is included in the zip.
Audio volume really is increased overall (I too had to turn everything down) and the beats makes the bass sound sweet!
cogeary said:
Whoa - déjà vu!
xLoud is included in the zip.
Audio volume really is increased overall (I too had to turn everything down) and the beats makes the bass sound sweet!
Click to expand...
Click to collapse
Yep, very noticeable difference. This one is much better than the first one w/o xLoud.
Sent from my MB865 using XDA App
Maybe its just me, but I can't seem to find a difference in quality using the car dock. Audio goes out the car docks 3.5mm jack to my Volvo s60r's stereo. I was hoping for some more volume.
Sent from my MB865 using xda premium
So will this work with pandora ??? I love pandora but the sound quality is shaky at times...
Sent from my MB865 using Tapatalk
I flashed the first beats mod without xloud, can I flash the xloud mod over it?
Sent from my MB865 using XDA
Yes you can, it will just overwrite the one you just installed.
lilhaiti said:
Yes you can, it will just overwrite the one you just installed.
Click to expand...
Click to collapse
It failed to flash when I tried it, idk what I did wrong.
Sent from my MB865 using XDA
Tried this tweak last week and it's great. My highs have come alive and it sounds much cleaner.
So how does the mod affect the Motorola stock equalizer?
I'm assuming the beats audio is only effective in the My Music app? So do I have to disable the "Effects" in settings to hear the Beats Audio? Or should I switch that to custom?
This work well seems crisper...... Did notice if the bass is overpowering the mids and lows go to sound settings and un-tick enable audio effects..... For me with headphones will set effects enabled effects profile custom surround ambient eq bass punch WOW!!!!!
iarejohnsmith said:
I'm assuming the beats audio is only effective in the My Music app? So do I have to disable the "Effects" in settings to hear the Beats Audio? Or should I switch that to custom?
Click to expand...
Click to collapse
Nope, it's not only in My Music, I use PowerAmp and it works perfectly
916x10 said:
Nope, it's not only in My Music, I use PowerAmp and it works perfectly
Click to expand...
Click to collapse
wait, so, it works by default, and all the additional effects are additional? but my system sounds are not any louder than they were before, which other people seem to be reporting
iarejohnsmith said:
wait, so, it works by default, and all the additional effects are additional? but my system sounds are not any louder than they were before, which other people seem to be reporting
Click to expand...
Click to collapse
Mine are....I have had to turn all my volumes down since installing this mod. I haven't done any critical listening since I don't use my phone like that anyway, I was just hoping for louder system sounds and that's exactly what I got. The Beats is just an added bonus.
Ok are we supposed to download the one that says older zip files test301.zip or the allandroidzip.zip that looks to be the newest?
Sent from my MB865 using xda premium
Awesome
Works great thanks! Sounds a lot better ican tell right away
So im sorry but I did this. And to be honest it didn't sound better at all. In fact I think it was worse everyone keeps saying stuff like wow... what a difference. But I hear worse clarity, more bass but... im a musician and so sounds I hear more clearly maybe than most but Idk.... anyways like I said im not trying to be rude.
Deliberate said:
So im sorry but I did this. And to be honest it didn't sound better at all. In fact I think it was worse everyone keeps saying stuff like wow... what a difference. But I hear worse clarity, more bass but... im a musician and so sounds I hear more clearly maybe than most but Idk.... anyways like I said im not trying to be rude.
Click to expand...
Click to collapse
Yea these are some of the same complaints I've heard about the actual beats headphones because they're made really for more hip hop songs and not a wide range of music the highs are where those headphones usually suffer IMO
Sent from my MB865 using xda premium
Hi all,
Managed to put the AudioX settings into a flashable CWM.zip file.
Attached is the newest version which I have currently installed:
Disable Tru Bass effect.
Limiter set to 0.150 instead of 0.250
SRS3D Set space to 0.5 instead of 0.800
I decided to leave some of the limiter since having an uncompressed signal can harm the physical speaker.
This tweak means louder speaker output and no Trubass effect which is by default boosting the 400Hz area.
WARNING: I do not take any responsibility for broken speakers etc. When I tried the original edits the volume was so loud the speaker made some crackle noises. If you keep that volume level chances are you will destroy the speaker and then it will crackle even at lower volumes. The new version does have a softer limiter and the volume levels are good so I think the speaker is not in danger.
Attached is the AudioX.zip cwm installable and the Default_Audio_Settings.zip installable. If you don't like the result simply flash the second zip.
All the best
htckt said:
Hi all,
Managed to put the AudioX settings into a flashable CWM.zip file.
Attached is the newest version which I have currently installed:
Disable Tru Bass effect.
Limiter set to 0.150 instead of 0.250
SRS3D Set space to 0.5 instead of 0.800
I decided to leave some of the limiter since having an uncompressed signal can harm the physical speaker.
This tweak means louder speaker output and no Trubass effect which is by default boosting the 400Hz area.
WARNING: I do not take any responsibility for broken speakers etc. When I tried the original edits the volume was so loud the speaker made some crackle noises. If you keep that volume level chances are you will destroy the speaker and then it will crackle even at lower volumes. The new version does have a softer limiter and the volume levels are good so I think the speaker is not in danger.
Attached is the AudioX.zip cwm installable and the Default_Audio_Settings.zip installable. If you don't like the result simply flash the second zip.
All the best
Click to expand...
Click to collapse
This should be in the development forums.
Sent from my HTC One XL using xda app-developers app
The speaker is super loud to me already. How much louder does this make it?
Sent from my HTC One X
Wow. This is one flash that really works well. Major difference in volume now. thanks,
Does this make only the loudspeaker (the one on the back of the phone) louder or will this increase the in-call volume as well? And what about headphones? Thanks in advance.
rilo2009 said:
Does this make only the loudspeaker (the one on the back of the phone) louder or will this increase the in-call volume as well? And what about headphones? Thanks in advance.
Click to expand...
Click to collapse
This one makes the loudspeaker in the back louder, I don't think it affects headphones since it's a different output.
I am not a pro developer, only played around with values that seem familiar and by guessing which is the speaker output compared to the in-call volume (since they have a different compression ratio).
All the best
htckt said:
This one makes the loudspeaker in the back louder, I don't think it affects headphones since it's a different output.
I am not a pro developer, only played around with values that seem familiar and by guessing which is the speaker output compared to the in-call volume (since they have a different compression ratio).
All the best
Click to expand...
Click to collapse
A bit late.... But will this work on 4.0.4 Roms and is it flashable through twrp 2.2.0??
Sent from my HTC One XL using xda premium
Luisit0 said:
A bit late.... But will this work on 4.0.4 Roms and is it flashable through twrp 2.2.0??
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
and odexed rooms? I have cleanroom 4.5 final. thanks.
its a mod, not an app. odex or deodex dont matter
is this for Sense or ASOP?
I flashed this on a sense Rom, definitely made the external speaker louder, sounded nice and crisp. Flashed with twrp no problem
Sent from my HTC One XL using Tapatalk 2
mushat3k said:
I flashed this on a sense Rom, definitely made the external speaker louder, sounded nice and crisp. Flashed with twrp no problem
Sent from my HTC One XL using Tapatalk 2
Click to expand...
Click to collapse
thanks for confirmation, gonna flash right now!!
I wonder what would happen if I flash this on top of mines. Speaker might just explode hehe
Sent from my One X using Tapatalk 2
might just be me, but i dont really notice a biiiiiiiig difference on speaker sound... i wiped both caches n flashed, then wiped caches again
Luisit0 said:
might just be me, but i dont really notice a biiiiiiiig difference on speaker sound... i wiped both caches n flashed, then wiped caches again
Click to expand...
Click to collapse
It wasn't a huge difference, but it probably made it atleast 30-50% louder
Sent from my HTC One XL using Tapatalk 2
mushat3k said:
It wasn't a huge difference, but it probably made it atleast 30-50% louder
Sent from my HTC One XL using Tapatalk 2
Click to expand...
Click to collapse
dunno wt i did wrong, i flashed it again and i can definetly tell its louder.. wierd lolz anyways cool mod!
The only way I can flash this is if I do it through CWM Recovery?
Sent from my Evita.
ILoveYouAll said:
The only way I can flash this is if I do it through CWM Recovery?
Sent from my Evita.
Click to expand...
Click to collapse
nop, it works with twrp too
Does this mod work on CM10? Whether yes or no, is there any particular reason to combine more than one audio modification on the same ROM?
Sent from my One X using xda premium
Flashed this on two phones running CleanROM 4.5, didn't change anything. Tried clearing all caches, reinstall of the ROM, etc.... nothing.
So I'm sharing my moded t03g audio file. Gives the speaker one hell of a boost!
Put it in etc/sound. Permissions rw-r--r--.
Speaker Boost
https://www.box.com/shared/crffdcvdwqo2dg9yaj5h
Speaker + Headset Boost
https://www.box.com/shared/lue9gcq3avnjhs9yr46a
Headset gets REAL loud! Made my Koss Porta Pro vibrate!
Thanks to imilka for directions and for cm10 on our devices.
Also. Try this mod with http://forum.xda-developers.com/showthread.php?p=31808489 for the most awesome result!
UPDATE: 2012-11-19
OK I got a new one that works for YouTube and games too based on newest cm10 build.
This should only be used on roms that have the wired headset microphone fix.
I will only make a version with both speaker and headphone volume increase. Here it is:
https://www.box.com/shared/nupknymebllvoifsct0e
I'm not sure it will work on all versions of cm.pa.aokp.aosp builds out there but try and see if it works for you.
UPDATE: 2012-12-16
So... I got some time to play around with latest CM10.1 for Note2. And I made the audio boost for it too
So here's the new t03g file for CM10.1:
http://db.tt/PLRq26l6
Enjoy!
You liked this? Press thanks and I'm happy!
Reb0rn said:
So I'm sharing my moded t03g audio file. Gives the speaker one hell of a boost!
Put it in etc/sound. Permissions rw-r--r--.
https://www.box.com/shared/crffdcvdwqo2dg9yaj5h
Thanks to imilka for directions and for cm10 on our devices.
You liked this? Press thanks and I'm happy!
Edit. Will try to boost earplug...
Click to expand...
Click to collapse
What value did you use?
I set 105 as I thought going higher might break your speaker... its more then enough.
Sent from my GT-N7100 using Tapatalk 2
Added headset boost. Its sick!!
Who needs volume + if its this easy to mod...
Sent from my GT-N7100 using Tapatalk 2
how to install?
edit: ohh sry, did not read...
Volume in music, phone and system sounds has increased, but when playing games or in Youtube watching clips the volume is still low .
gee2012 said:
Volume in music, phone and system sounds has increased, but when playing games or in Youtube watching clips the volume is still low .
Click to expand...
Click to collapse
Hmm.. that sucks. Wonder how to fix that...
Sent from my GT-N7100 using Tapatalk 2
Sound is gone.
Fired From My FireDevice.
U have to set right permissions. If you don't know how. Reboot to recovery. Advanced. And choose fix permissions.
Profit.
Sent from my GT-N7100 using Tapatalk 2
Hi again, i'm a afraid that the speaker gonna break... can I shouse the max volume someware?
Sent from my GT-N7100 using Tapatalk 2
2xmrc00l said:
Hi again, i'm a afraid that the speaker gonna break... can I shouse the max volume someware?
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
Check pic.
Sent from my GT-N7100 using Tapatalk 2
Reb0rn said:
U have to set right permissions. If you don't know how. Reboot to recovery. Advanced. And choose fix permissions.
Profit.
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
Already tried BT not working. Awesome beats FC.
Fired From My FireDevice.
BT is common cm10 error. Not from this mod.
Awesome beats reinstall.
Sent from my GT-N7100 using Tapatalk 2
Sound is gone....used ES File Explorer and rebooted in to recovery and fixed permissions..
I noted that in some downloads its called .bin in the end.
Delete that. It should only be named t03g
Sent from my GT-N7100 using Tapatalk 2
Its not working with jellybam. Confirmed...file is different...
Fired From My FireDevice.
Thanks for the tweak, I was just looking for something that would allow to up the speaker volumen, too low to wake up to the alarm in the morning...
Reb0rn said:
I noted that in some downloads its called .bin in the end.
Delete that. It should only be named t03g
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
nope was not the case for me
OK I got a new one that works for YouTube and games too based on newest cm10 build.
This should only be used on roms that have the wired headset microphone fix.
I will only make a version with both speaker and headphone volume increase. Here it is:
https://www.box.com/shared/nupknymebllvoifsct0e
I'm not sure it will work on all versions of cm.pa.aokp.aosp builds out there but try and see if it works for you.
Sent from my GT-N7100 using Tapatalk 2
Nice mod and works very well with PA.
I would recommend decreasing external speaker volume as its very risky and must be close to the limit as it is very distorted over 75% even with bass turned down .
Thanks.
:: Edit file 102 seems to work well no distortion on full volume only when bass ramped up
Sent from inside the lunatics pea brain
This is a mod based on the libraries Beats, completely replaces audioconfig Smart, does not increase the volume (and other fashion), only the sound quality.
With third-party players who themselves process the sound and ignore the system settings (such as poveraimp) not working (it will work if you turn off this processing in the player settings) as BeatsEQ this system EQ it works with system applications and change the sound when listening to Music, Video, WEB (Internet), BLUETOOTH, and other audio streams system.
Installation CWM
Put on a clean system.
4.2.2 ODEX / DEODEX
Backup before installing.
Backup is the only way to roll .
(a lot of files , and then pull them out of the firmware problem , especially as some stock is replaced.)
For S4 I9500
Downloads
For S4 I9505
Downloads
What does this specifically do?
I was wondering this mod have?
Paolonicus said:
I was wondering this mod have?
Click to expand...
Click to collapse
This mod - library Beets and Dolby mobile.
Changed sound config.
I tried on SII 4.1.2 and it works good
Angelkom said:
I tried on SII 4.1.2 and it works good
Click to expand...
Click to collapse
O.K.
Doesn't work on rooted Nexus 4.
Sent from my Nexus 4 using xda premium
Does this only improve the bass? No contribution to the volume?
Paolonicus said:
Does this only improve the bass? No contribution to the volume?
Click to expand...
Click to collapse
It is just a good sound and good bass. :good:
There is an increase in the volume of the headphones , if you need I can give.
Installation CWM:
Many thanks!
noskojv said:
It is just a good sound and good bass. :good:
There is an increase in the volume of the headphones , if you need I can give.
Installation CWM:
Click to expand...
Click to collapse
Many thanks! Not only this mod improved clarity and bass, you also helped me with the issue I have with the volume!
Hello,
Will the improved Headphone Volume MOD work on the 9505, too or only 9500?
Lienot said:
Hello,
Will the improved Headphone Volume MOD work on the 9505, too or only 9500?
Click to expand...
Click to collapse
Yes.
noskojv said:
Yes.
Click to expand...
Click to collapse
Happen to know if this zip will work on the i337M? The beats part, not the headphones part
Sent from my SGH-I337M using xda premium
prking07 said:
Happen to know if this zip will work on the i337M? The beats part, not the headphones part
Sent from my SGH-I337M using xda premium
Click to expand...
Click to collapse
Make a backup and check please. I think should work. Let me know.
noskojv said:
Make a backup and check please. I think should work. Let me know.
Click to expand...
Click to collapse
Yup, tested it and it works perfectly!! Thanks!
Sent from my SGH-I337M using xda premium
noskojv said:
It is just a good sound and good bass. :good:
There is an increase in the volume of the headphones , if you need I can give.
Installation CWM:
Click to expand...
Click to collapse
Thank you so much. That increased the volume, and also, I used this mod and enjoy it very much
I got strange behavior with it. It works initially then when I disconnect and reconnect my headphone, no eq effect. sometimes it kicks in automatically in a minute or so sometimes doesn't.
c_zal said:
I got strange behavior with it. It works initially then when I disconnect and reconnect my headphone, no eq effect. sometimes it kicks in automatically in a minute or so sometimes doesn't.
Click to expand...
Click to collapse
Settings / sound / music effects
Select BeatsEQ
Is it only me or this mod breaks stock player?
ama3654 said:
Is it only me or this mod breaks stock player?
Click to expand...
Click to collapse
+1 .. Wanam's ROM. The (Mod_headphones.zip) file in post 8 works fine though.
i installed this and stock music player isnt working. it had more bass compared to this dunno why i feel so. I didnt backup so is there a way to go back n get stock music player functionality.
Hey guys I just wanted to share I played around with the files and it was so hard to figure out how to get bass on this phone
I could enable temporary the bass with also mixer now I could enable permanently.
U will set the SAMPLERATE of the phone to
Frequencies:
KHZ_192
KHZ_96
KHZ_48
And set FORMAT to
Bit Depth:
S16_LE
S24_LE
Navigate to system/etc/mixerpath.xml
Open and
Scroll down to speaker settings in like in Screenshot
And put these lines
<ctl name="SLIM_0_RX SampleRate" value="KHZ_192" />
<ctl name="SLIM_0_RX Format" value="S24_LE" />
Just add and configure with viper4android
Because the Sony Walkman equalizer don't work after this.
U will hear the bass greatly
Enjoy
PS: it will work on all Kk devices based on Sony firmware
Included
Sony Xperia Z1 Compact
Sony Xperia Z Ultra
Etc
Not sure if it work with cyanogenmod roms just test
Sent from my C6903 using XDA Premium 4 mobile app
It actually works, thanks a lot! But now I can't actually adjust the volume, which is a major problem. Have you got any ideas? ?
Edit; Actually , if you turn off clear audio it works again. , also do you think it might work if we add those bits to the headphone section? With a few adjustments.
And you have to adjust The speaker with viper if you have it Volume boosted by the way.
Sent from my C6903 using XDA Premium 4 mobile app
dontbelive said:
Hey guys I just wanted to share I played around with the files and it was so hard to figure out how to get bass on this phone
I could enable temporary the bass with also mixer now I could enable permanently
U will set the SAMPLERATE of the phone to (KHZ_192)
And set FORMAT to (S24LE)
Navigate to system/etc/mixerpath.xml
Open and
Scroll down to speaker settings in like in Screenshot
And put these lines
Just add nothing else and if you want u can play around with the speaker sound set to 85 instead of 83
U will hear the bass greatly
Enjoy
PS: it will work on all Kk devices based on Sony firmware
Included
Sony Xperia Z1 Compact
Sony Xperia Z Ultra
Etc
Not sure if it work with cyanogenmod roms
Sent from my C6903 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hey man thank you!
But your mixer_paths.xml is a bit different, do you already using a mod do boost volume? I dont use nothing now, your changes will be my first. Will work?
Cheers!
Rafe said:
Hey man thank you!
But your mixer_paths.xml is a bit different, do you already using a mod do boost volume? I dont use nothing now, your changes will be my first. Will work?
Cheers!
Click to expand...
Click to collapse
I think his mixer_paths has z2's scripts writed inside.but I think it should work if you just add that 2 scripts inside your mixer_paths
Sent from my C6903 using Tapatalk
jimRnor said:
I think his mixer_paths has z2's scripts writed inside.but I think it should work if you just add that 2 scripts inside your mixer_paths
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
Humm and where i can find those Z2 scripts?
Rafe said:
Humm and where i can find those Z2 scripts?
Click to expand...
Click to collapse
The xml files on z2's system
Sent from my C6903 using Tapatalk
Chocolatetrain said:
It actually works, thanks a lot! But now I can't actually adjust the volume, which is a major problem. Have you got any ideas? ?
Edit; Actually , if you turn off clear audio it works again. , also do you think it might work if we add those bits to the headphone section? With a few adjustments.
And you have to adjust The speaker with viper if you have it Volume boosted by the way.
Sent from my C6903 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I don't know.I Did not try abt headphone
I can adjust volume with clearaudio on I have no problems
And yeah viper4android is good to adjust the bass etc
Sent from my C6903 using XDA Premium 4 mobile app
Rafe said:
Hey man thank you!
But your mixer_paths.xml is a bit different, do you already using a mod do boost volume? I dont use nothing now, your changes will be my first. Will work?
Cheers!
Click to expand...
Click to collapse
I use the mod Dreamingonloudmusic MOD v6 that's why I have these more lines
It will work just add
Sent from my C6903 using XDA Premium 4 mobile app
Thanks man!
What about to set a bigger sample rate? Like 320? Its possible?
Cheers
Rafe said:
Thanks man!
What about to set a bigger sample rate? Like 320? Its possible?
Cheers
Click to expand...
Click to collapse
Nope
Only these
KHZ_48
KHZ_96
KHZ_192
And for Format only (this will activate Bass)
S16LE = low bass (nearly no bass)
S24LE = high bass (great bass but with distortion)
Sent from my C6903 using XDA Premium 4 mobile app
dontbelive said:
Nope
Only these
KHZ_48
KHZ_96
KHZ_192
And for Format only (this will activate Bass)
S16LE = low bass (nearly no bass)
S24LE = high bass (great bass but with distortion)
Sent from my C6903 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
That's changing the frequencies and bit depth played by the speaker, just so you know. Thanks for this find!
propably all of those will work:
olokos said:
That's changing the frequencies and bit depth played by the speaker, just so you know. Thanks for this find!
propably all of those will work:
Click to expand...
Click to collapse
Thanks that's cool I will try these values and see if it will change I will update thread with more information for more clarification and I will upload my own modded mixerpath.xml cuz I put everything to limit but without distortion and sound good without quality lose again thanks
EDIT; it don't work I tried so only the bit depth I post and frequency are valid I don't know how to add more values I think it's in kernel? Or I don't know but still main thing we reached to get more bass on loudspeaker and only problem is to reduce the noise and bass strength, just lower volume is not possible cuz u will be not able to hear anything so I hope good devs can do something with these to get clear bass and clear voice playback on this speakers like the g2 or note 3
Sent from my C6903 using XDA Premium 4 mobile app
Is it possible to change the recording volume of the microphone too this way?
saintgein said:
Is it possible to change the recording volume of the microphone too this way?
Click to expand...
Click to collapse
Yes but it's another section
Go to all mic section
Speaker-mic section
Stereo-mic etc
Everything related to it and change the
ADC Volume .. It have different names
ADC1
ADC2
ADC3
ADC4
ADC5
So most probably it's always at 12 just trigger it to 19
Same for camcorder-mic
You will have better sound record push it to 19 and the DEC3 Volume to 89 normally it's 83 or 82
Sent from my C6903 using XDA Premium 4 mobile app
dontbelive said:
Thanks that's cool I will try these values and see if it will change I will update thread with more information for more clarification and I will upload my own modded mixerpath.xml cuz I put everything to limit but without distortion and sound good without quality lose again thanks
EDIT; it don't work I tried so only the bit depth I post and frequency are valid I don't know how to add more values I think it's in kernel? Or I don't know but still main thing we reached to get more bass on loudspeaker and only problem is to reduce the noise and bass strength, just lower volume is not possible cuz u will be not able to hear anything so I hope good devs can do something with these to get clear bass and clear voice playback on this speakers like the g2 or note 3
Sent from my C6903 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank you, its really useful
Could you make a new list of the bitrate and frequencies that work? I'll try that on the Z1 and report here.
saintgein said:
Is it possible to change the recording volume of the microphone too this way?
Click to expand...
Click to collapse
Yup, let me know how do you want it to be changed in percentage and where calls/videos/what?
dontbelive said:
Yes but it's another section
Go to all mic section
Speaker-mic section
Stereo-mic etc
Everything related to it and change the
ADC Volume .. It have different names
ADC1
ADC2
ADC3
ADC4
ADC5
So most probably it's always at 12 just trigger it to 19
Same for camcorder-mic
You will have better sound record push it to 19 and the DEC3 Volume to 89 normally it's 83 or 82
Sent from my C6903 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Exactly what i was looking for, although it's a bit hard to try because of the problem occuring when there's alot of bass around. I'm talking about the recording volume when shooting vids btw. What's the difference between stereo and speaker mic?
olokos said:
Thank you, its really useful
Could you make a new list of the bitrate and frequencies that work? I'll try that on the Z1 and report here.
Yup, let me know how do you want it to be changed in percentage and where calls/videos/what?
Click to expand...
Click to collapse
Video's, and like i said, a little lower (20-30% maybe?, so if there's alot of bass around, the mic doesn't distort all the way around. I'm also not very good at editing stuff like this, so thanks if you can help with this! I bet there's more people who love a mod like this, since i heard some people talking about distorted sound with vids.
olokos said:
Thank you, its really useful
Could you make a new list of the bitrate and frequencies that work? I'll try that on the Z1 and report here.
Click to expand...
Click to collapse
I edit the OP just check I tried all other settings like in the picture but I don't work only the listed one, look
16 bit depth it's to less and
24 bit depth it's to high
So 20 bit would be normal bass and acceptable so maybe one of our developers with more knowledge know how to add more bit depth and frequency? I don't know
Sent from my C6903 using XDA Premium 4 mobile app
saintgein said:
Exactly what i was looking for, although it's a bit hard to try because of the problem occuring when there's alot of bass around. I'm talking about the recording volume when shooting vids btw. What's the difference between stereo and speaker mic?
Video's, and like i said, a little lower (20-30% maybe?, so if there's alot of bass around, the mic doesn't distort all the way around. I'm also not very good at editing stuff like this, so thanks if you can help with this! I bet there's more people who love a mod like this, since i heard some people talking about distorted sound with vids.
Click to expand...
Click to collapse
Sure thing, just send me your mixer_paths.xml from /system/etc and I'll do that
dontbelive said:
I edit the OP just check I tried all other settings like in the picture but I don't work only the listed one, look
16 bit depth it's to less and
24 bit depth it's to high
So 20 bit would be normal bass and acceptable so maybe one of our developers with more knowledge know how to add more bit depth and frequency? I don't know
Sent from my C6903 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
So you've tried any other frequencies/depths? What were the results? No sound at all or what? It works great with 192kHz/24bits on the Z1. I'll try the other ones after I get some rest as I'm tired as hell now
olokos said:
So you've tried any other frequencies/depths? What were the results? No sound at all or what? It works great with 192kHz/24bits on the Z1. I'll try the other ones after I get some rest as I'm tired as hell now
Click to expand...
Click to collapse
Nope it just get back to stock values if I change to other frequency,, I mean
Stock KHZ_48 and S16LE
Sent from my C6903 using XDA Premium 4 mobile app
Look like in the ss and sorry for double post I could not add pictures from gallery when I try to edit previous post
Sent from my C6903 using XDA Premium 4 mobile app