Database Info

[Q] Restore deleted files

Hey guys,
Is there any way to restore deleted files from the Note 10.1. Please Help... Thanks alot

What kind of files? Stored on the internal sdcard?
Sent from my SGH-I777 using xda app-developers app

methaq said:
What kind of files? Stored on the internal sdcard?
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
Yea stored on the internal memory, files of pictures format, documents and pdf.
TYPICALLY, what i want are PNG Files
"Kno App" files

There are many data recovery apps out there.. shut off your tablet first and make sure you don't write anything to it.. boot up CWM and have it mount whatever is holding the files you wanna retreive. The n install any data recovery app to your comp, hook it up, select it in the program and hit go.
The key thing is to not write anything to the tablet , which includes not using the tablet as it may write fragments of information on itself as cache or otherwise; so turn it off.
Sent from my GT-N8013 using xda app-developers app

younix258 said:
There are many data recovery apps out there.. shut off your tablet first and make sure you don't write anything to it.. boot up CWM and have it mount whatever is holding the files you wanna retreive. The n install any data recovery app to your comp, hook it up, select it in the program and hit go.
The key thing is to not write anything to the tablet , which includes not using the tablet as it may write fragments of information on itself as cache or otherwise; so turn it off.
Sent from my GT-N8013 using xda app-developers app
Click to expand...
Click to collapse
after that happened, i tried to root my device, but when i press the power button and volume down it doesnt want to enter CMW mood and instead enters Android System Recovery <3e> . If you could help me with it i'll be grateful, thanks alot

AbdallahSaied said:
after that happened, i tried to root my device, but when i press the power button and volume down it doesnt want to enter CMW mood and instead enters Android System Recovery <3e> . If you could help me with it i'll be grateful, thanks alot
Click to expand...
Click to collapse
Use Odin, untick " Auto Reboot ", install CWM, when done , press power button together with volume up ( the one apart from the power button ), you will be diverted into CWM , you will get a disable feature within cwm , choose it & reboot.
You will have permanent CWM.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
lsherif said:
Use Odin, untick " Auto Reboot ", install CWM, when done , press power button together with volume up ( the one apart from the power button ), you will be diverted into CWM , you will get a disable feature within cwm , choose it & reboot.
You will have permanent CWM.
Click to expand...
Click to collapse
When i'm one ODIN Mode, then i unchecked Auto reboot, and try to install it again. I got this. please help

AbdallahSaied said:
View attachment 1425346
When i'm one ODIN Mode, then i unchecked Auto reboot, and try to install it again. I got this. please help
Click to expand...
Click to collapse
Try connecting to another port, seems you have a problem with this port .

[Q] Can't root my device N8013

I did exactly everything with the steps, then when i tried to enter CWM for the first time. it didn't load, and rather entered Android System Recovery <3e>.
So i read that when on ODIN Mode, i uncheck the AutoReboot and install it again, but when i did that it gaves me FAIL. Here's a screen shot.
Please Help and now like this, is the device rooted or not. " Tried all different ports"
HELP
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

AbdallahSaied said:
I did exactly everything with the steps, then when i tried to enter CWM for the first time. it didn't load, and rather entered Android System Recovery .
So i read that when on ODIN Mode, i uncheck the AutoReboot and install it again, but when i did that it gaves me FAIL. Here's a screen shot.
Please Help and now like this, is the device rooted or not. " Tried all different ports"
HELP
View attachment 1425434
Click to expand...
Click to collapse
Reinstall Samsung Mobile Device USB drivers.
Here: http://www.mediafire.com/?qp9gw2i9lwbr3qb
Sent from my GT-N7100 using XDA Premium HD app

Okay, I'm Downloading it now. but just want to make sure of the steps:
1.Power button + volume down till entering ODIN Mode
2.open ODIN v1.85 from my PC
3.uncheck AutoReboot
4.Click on PDA and choose HighOnAndroid file
5.Press Start
is that correct so far ? Thanks alot i hope it works this time
Mister_Mxyzptlk said:
Reinstall Samsung Mobile Device USB drivers.
Here: http://www.mediafire.com/?qp9gw2i9lwbr3qb
Sent from my GT-N7100 using XDA Premium HD app
Click to expand...
Click to collapse

AbdallahSaied said:
Okay, I'm Downloading it now. but just want to make sure of the steps:
1.Power button + volume down till entering ODIN Mode
2.open ODIN v1.85 from my PC
3.uncheck AutoReboot
4.Click on PDA and choose HighOnAndroid file
5.Press Start
is that correct so far ? Thanks alot i hope it works this time
Click to expand...
Click to collapse
That looks about right. Just install the Samsung mobile USB drivers and follow the root guide as normal. Do whatever it says to do.
Sent from my GT-N8010 (Which is actually a GT-N8013 flashed with an official Samsung GT-N8010 ROM using Odin) using XDA Premium HD app

AbdallahSaied said:
Okay, I'm Downloading it now. but just want to make sure of the steps:
1.Power button + volume down till entering ODIN Mode
2.open ODIN v1.85 from my PC
3.uncheck AutoReboot
4.Click on PDA and choose HighOnAndroid file
5.Press Start
is that correct so far ? Thanks alot i hope it works this time
Click to expand...
Click to collapse
After the install don't let it boot to the home screen. Instead immediately boot right back into CWM and then you'll be fine.
"Q: I don’t see ClockworkMod Recovery when I enter recovery, I see stock Android recovery.
A: With newer software updates, you may be encountering this error because it will overwrite ClockworkMod Recovery upon reboot. To get around this, simply boot into ClockworkMod Recovery right after flashing in ODIN."

Actually, I found ODIN 3.0.4 was better to flash the GNote 10.1 with... In fact I had problems getting 1.85 to recognise the note was attached to the PC. Since I had 3.04 too i tried that and had no problems... I would suggest using the later version of ODIN, ODIN 3.0.4....

Android 2.3.6 Firmware on Galaxy Pocket Duos S5302

Install Android 2.3.6 Firmware on Galaxy Pocket Duos S5302
Reminder
You will lose installed custom ROM such as CM10, Paranoid Android or AOKP after flashing official firmware. Custom ROM will be replaced by official stock ROM.
You will lose custom recovery such as ClockworkMod Recovery or TWRP Recovery if you have any. Custom recovery will be replaced by stock recovery. We will soon write on how to install ClockworkMod recovery on Galaxy Pocket Duos S5302. [Try search box at top-right to get it]
Your device no longer belongs to rooted device once you install this firmware. We will soon write on how to root Galaxy Pocket Duos S5302. [Try search box at top-right to get it]
Though official firmware update usually not erase any system data but we advise you to follow our pre-requisites mentioned on previous page as precaution.
This firmware released by Samsung and flashing of this won’t increase binary counter.
Download this - Click here-
2)Odin Download[
How to Update Galaxy Pocket Duos GT-S5302 to S5302JPLH2 Android 2.3.6 Official Firmware--:good::good:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Extract Firmware zip file that you downloaded already from above link, you will get a .tar file and some other files.
Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Power off your phone. Wait 5-6 seconds for vibration to confirm complete switch off.
Now, put the Galaxy Pocket Duos GT-S5302 phone in Download Mode by pressing pressing and holding down the Volume Down and Home buttons while pressing the Power button until you are welcomed by a green robot indicating you are in Download Mode.
Now run Odin3 v3.07.exe (see Step 2) as an Administrator because Admin privileges is required to complete the process smoothly.
Now connect your Galaxy Pocket Duos GT-S5302 with your PC using USB cable. A message will arrive under Odin’s message box in the bottom left saying “Added!!”. If you don’t get the same then you should try another USB port (try USB port located in back in your desktop PC). If that too don’t work then you should then reinstall the driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device.
Select these files in Odin at respective tabs from extracted S5302JPLH2 firmware folder :
Click the PDA Button, and select the .tar file here with *code* appearing in its name
Click the Phone Button, and select file with *modem* in its name (leave if there is no such file)
Click the CSC Button, and select file with *csc* in its name (leave if there is no such file)
Click the PIT Button, and select the .pit file. Use only if you got it while extracting in step 1 above, otherwise ignore it.
In Odin window, make sure Auto Reboot and F. Reset Time checkboxes are selected. Also, make sure that Re-Partition checkbox is selected, only if you are using a .pit file (see Step 7.4).
Double check everything that we mentioned in Step 7 & Step 8 above. Now, once satisfied hit the START button to begin the flashing process.
Once flashing completed, you will see a PASS message with green background in the left-most box at the very top of the Odin. The phone will then automatically rebooted and soon you will see the Samsung logo. You can then unplug the USB cable to disconnect your device from computer.
Congrats! Your Galaxy Pocket Duos, model number S5302 should now run on Android 2.3.6 Gingerbread build JPLH2. Go to Settings > About phone to verify this firmware update.:good::good:

thanx bro

I didn't see any links?
Sent from my GT-S5300 using Tapatalk 2

luqman98 said:
I didn't see any links?
Sent from my GT-S5300 using Tapatalk 2
Click to expand...
Click to collapse
google it

Dont joke ok..where's the link

[GUIDE] How To Overclock Samsung Galaxy Ace Plus S7500

NOTE: I Will Not Be Held Responsible For Any Bricked Devices. Please Use At Your Own Risk.Will Be Fine If You Follow Exact Instructions!
Things you will neeed: (all links below)
1.ROOTED DEVICE
2.Clockworkmod 5.0.0.4.tar
3.Odin v 1.85
4.Update-kernel-Trebon(thanks to mb-14)
5.Rom Toolbox Pro
Steps:
-Transfer update-kernel-trebon to your sd card
-Your device should have clockworkmod 5.5.0.4 installed by default if
not flash with Odin(open Odin and click ''PDA'' and select clockworkmod
5.5.0.4.tar.Turn off your device and boot into download mode by holding the volume
down+home+power keys together.Then press volume up to continue.Connect your phone
to pc by using your usb cable and in the ID:COM section in odin you will notice a yellow/green box pop up,this
means that your device is connected and ready.Press ''start'' in odin and leave to finish,then reboot your device if
not automatically rebooted.)
-Turn on your device into recovery mode by holding the volume down+volume up+power+home keys together
-Navigate in clockworkmod by using the volume up and down keys and select using the home key.Go to ''install zip
from sd card'' and ''choose zip from sd'' and choose update-kernel-trebon.zip.Then reboot your device
-Finally install Rom Toolbox Pro and under performance you will see ''cpu control''and then ''cpu sliders'' where you
change the frequency of the cpu to maximun '1305'
You Will Definitely Feel The Performance Bump In Games!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Clockworkmod 5.5.0.4 - http://search.4shared.com/postDownload/NrzNirXN/clockworkmod_5_5_0_4_2.html
Update-kernel-Trebon - http://search.4shared.com/postDownload/-JiqA7Nm/ace_plus_kernel-_thanks_to_mb-.html
Rom Toolbox Pro - http://www.4shared.com/get/735EkeBg/ROM_Toolbox_Pro_v595.html
Odin v1.58 - http://www.4shared.com/get/74D8ERjO/odin_v185.html
Press ''Thanks'' If I Helped You :good:

NC

hehe lol

Hey cn v over clock using CWM 6.0????
Sent from my GT-S7500 using xda app-developers app

trendchanger said:
Hey cn v over clock using CWM 6.0????
Sent from my GT-S7500 using xda app-developers app
Click to expand...
Click to collapse
I haven't tried using 6.0 but just in case you wanna try it I recommend doing some research first because you never know what can happen.Going back to CWM 5.0.0.4 is a very easy process though,all you have to do is put your phone into download mode and connect to the PC and open odin3 then flash the cwm tar package as PDA and wait for phone to reboot.Good luck with everything man :highfive:

trendchanger said:
Hey cn v over clock using CWM 6.0????
Sent from my GT-S7500 using xda app-developers app
Click to expand...
Click to collapse
overclocking is not related to recovery its a kernel thing :good:
you can overclock your processor with any recovery it can be twrp (in my case)

Hey does this kernel work on any ROM ? and do i need to have the exact CWM version u mentioned up there or i can use a higher version ( im using 6.xxx )

Mad VIbes said:
NOTE: I Will Not Be Held Responsible For Any Bricked Devices. Please Use At Your Own Risk.Will Be Fine If You Follow Exact Instructions!
Things you will neeed: (all links below)
1.ROOTED DEVICE
2.Clockworkmod 5.0.0.4.tar
3.Odin v 1.85
4.Update-kernel-Trebon(thanks to mb-14)
5.Rom Toolbox Pro
Steps:
-Transfer update-kernel-trebon to your sd card
-Your device should have clockworkmod 5.5.0.4 installed by default if
not flash with Odin(open Odin and click ''PDA'' and select clockworkmod
5.5.0.4.tar.Turn off your device and boot into download mode by holding the volume
down+home+power keys together.Then press volume up to continue.Connect your phone
to pc by using your usb cable and in the ID:COM section in odin you will notice a yellow/green box pop up,this
means that your device is connected and ready.Press ''start'' in odin and leave to finish,then reboot your device if
not automatically rebooted.)
-Turn on your device into recovery mode by holding the volume down+volume up+power+home keys together
-Navigate in clockworkmod by using the volume up and down keys and select using the home key.Go to ''install zip
from sd card'' and ''choose zip from sd'' and choose update-kernel-trebon.zip.Then reboot your device
-Finally install Rom Toolbox Pro and under performance you will see ''cpu control''and then ''cpu sliders'' where you can
change the frequency of the cpu to maximun '1305'
You Will Definitely Feel The Performance Bump In Games!
View attachment 2296445
Clockworkmod 5.5.0.4 - http://search.4shared.com/postDownload/NrzNirXN/clockworkmod_5_5_0_4_2.html
Press ''Thanks'' If I Helped You :good:
Click to expand...
Click to collapse
There is already a guide for this...

medo227 said:
Hey does this kernel work on any ROM ? and do i need to have the exact CWM version u mentioned up there or i can use a higher version ( im using 6.xxx )
Click to expand...
Click to collapse
I don't know about the ROM part because i lost the phone but yes it will work for your CWM version also

medo227 said:
Hey does this kernel work on any ROM ? and do i need to have the exact CWM version u mentioned up there or i can use a higher version ( im using 6.xxx )
Click to expand...
Click to collapse
Worked for me on stock 2.3.6 with CWM 6 though

sonyx10mini said:
Worked for me on stock 2.3.6 with CWM 6 though
Click to expand...
Click to collapse
That's good to hear

odin 3.04
omarilzz said:
NC
Click to expand...
Click to collapse
also works on odin v3.04?

massi cuea said:
also works on odin v3.04?
Click to expand...
Click to collapse
Yes it will GL

broken links
Is it just me, or are the download links not working anymore ?

J0hnick said:
Is it just me, or are the download links not working anymore ?
Click to expand...
Click to collapse
Thanks for the notice all are working fine besides odin3, updated as of now

Yes all links are work fine J0hnicki just checked

Thanks for the feedback @sonyx10mini

Wifi won't turn on
Hi,
after flashing update-trebon i can't turn wifi on only say error in settings.
Sry for my English

I tried installing Rom Toolbox Pro, it says I don't have enough free space but I have almost 1GB :-/

[GUIDE FOR NOOBS ] How to root samsung s3 i9300

CF-Auto-Root is available for both International and carrier locked versions of Galaxy S3.
As CF-Auto-Root installs or keeps the stock recovery i included the steps to install the ClockworkMod Recovery which you can skip if not needed.
Supporting Models of Galaxy S3 :
- GT-I9300
- GT-I9300T
- GT-I9305
- GT-I9305T
- GT-I9305N
- SHV-E210K
- SHV-E210L
- SHV-E210S
- SHW-M440S
What's installed
- SuperSU binary and APK
- Stock recovery
Requires:
- A windows computer with Galaxy s3 driver installed ( Use Kies ).
- Odin
- Any of the Galaxy S3 model listed in the Supporting Models with more than 50% battery.
- USB Cable
Note:
- This root increases your flash counter. You should run Triangle Away after rooting if want to reset the counter.
- Backup all your important data
- Kill all the Kies processes using Windows Task Manager
- Disable Antivirus
Disclaimer:
Rooting or installing recovery may brick your phone or void warranty. I am not responsible for anything. Do at your risk.
HOW TO ROOT GALAXY S3 USING CF-AUTO-ROOT ?
1. Download and extract Odin3-v1.85_technoxide.com.zip
2. Download and extract CF-Auto-Root-xx-xxxx-modelnumber.zip for your device model from Official XDA thread.
( I am downloaded CF-Auto-Root-m0-m0xx-gti9300.zip as my device model is I9300 )
3. In your PC open Odin3 v1.85.exe
4. Click PDA button and select CF-Auto-Root-xx-xxxx-modelnumber.tar.md5
( Mine is CF-Auto-Root-m0-m0xx-gti9300.tar.md5 )
5. Boot your phone to download mode ( Turn off phone, after all the lights gone press volume Down + Home + Power .If it asks to press a button to continue, press the listed button ).
5. Now, Connect the phone to PC using USB cable.
6. If everything correct Odins ID:COM box it will be in yellow or blue color with a port name.
7. Make sure Re-partition is NOT checked.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
8. Finally Click Start button and wait till the phone reboot.
After complete update Odin will show PASS on top left and phone will reboot.
That's it....You are successfully Rooted your phone.... Now follow the steps below if you want to install ClockWorkMod recovery.
HOW INSTALL CLOCKWORKMOD RECOVERY IN SAMSUNG GALAXY S3 ?
Note
Installing recovery steps and images are made based on Galaxy S3 I9300... if you have another one use the correct one for your model.
1. Install and open ROM Manager
2. Click Recovery Setup.
http://2.bp.blogspot.com/-ayjbsrknzPg/Ug0lcvwiw8I/AAAAAAAABGo/eQiOKgnZJwg/s320/Rom-Manager-Recovery-Setup.png
3. In the next screen select ClockWorkMod Recovery under INSTALL OR UPDATE RECOVERY.
4. In the next screen click on Phone Model
Finally in the next screen click Flash ClockworkMod Recovery and wait till it finishes the download and installation.
* if you want to install ClockWorkMod Touch version click on the toggle button before doing the 5th step.
That's it...done...To check the ClockWorkMod recovery boot to recovery either by holding the Volume up + Home + Power or by clicking the Reboot into Recovery in ROM Manager.

There is no need for 2 same threads about rooting phone..
http://forum.xda-developers.com/showthread.php?t=2235366 here is already one and these sort threads belongs in Samsung galaxy S3 Development or Q&A section of the S3

Fantassy123 said:
There is no need for 2 same threads about rooting phone..
http://forum.xda-developers.com/showthread.php?t=2235366 here is already one and these sort threads belongs in Samsung galaxy S3 Development or Q&A section of the S3
Click to expand...
Click to collapse
I put this here for a guy that couldn't get into development and for who ever else cant get in there and ask questions. Thats why it says guide for noobs.
sorry for the inc

I tried the above mentioned solution but it doesnt work for me!
NAND Write start!!
FAIL!