Database Info

[TOOL] Lx Multi Tool v1.3.2 [WIN/LIN/MAC][Unlock/Recovery/Stock/Kernel/More]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It has LINUX/UNIX and MAC support!
​
Due to the fact that there is another tool for Android called Android Multi Tools, I decided to rename this one to Lx Multi Tool, future releases will go under this name.
Features: ​Fastboot
- Unlock/Lock Bootloader
- Flash Recovery Menu (you can choose and add recoveries) - TWRP 2.8.7.2 Included
- Flash any partition (Flashing submenu)
- Flash full Stock images (you can choose and add images)
- Erase partitions (you can choose which of the partitions)
- Reboot (you can choose again...)
Adb
- Sideload .zip files (you can choose and add .zip files) - SuperSU v2.65 (Systemless!) included
- Backup (you can choose the name and place for your backup)
- Restore (you can choose your backup)
- Version (it just shows the version of your adb binaries) - platform-tools 23.1 included
- Logs (DMESG and Logcat)
- Screenshots (you can directly take screenshots to your PC with no Root)
- Reboot (lots of choices)
Others
- Refresh and delete files/folders from menus (Right click or key F5 and Del)
- Open tool folders from the menus (to add your own kernel/stock image/recovery/sideload zip files)
- Tab key support for easier keyboard navigation
- Tool-tips for all buttons
- Check for updates
- Link to xda-thread (here)
​
Download links: ​Windows x86|x64 - Linux x64 - MAC x64
All released versions can be found here.
​
[ROOT] Use SuperSU 2.62 or higher from here systemless for 6.0.1 and above.​
Known bugs/limitations: ​ - For partition Flashing, it is recommended(mandatory?) to do a reboot-bootloader if you want to flash multiple partitions one after the other. (according to the Google flashing scripts) (Implemented in 1.2.1)
- For return to stock, the tool will be stuck after your phone successfully boots, you need to reboot to fastboot again in order to flash the Radio and finish the full return to stock. (Fixed in 1.2.0)​
Changelog: ​
Check the changelog for each release here.
​
Tutorials/FAQ: ​
Q: How do I get in bootloader/fastboot mode?
Turn off the phone and turn it on by using Volume down + Power key.
Q: How do I check for updates in your tool?
Follow the instructions in the screen below.
Q: Where can I find the device driver to install it for windows?
Click here, download the driver and run the setup.
Q: How do I root my stock phone?
- Unlock bootloader.
- Flash recovery.
- Use SuperSU 2.62 systemless or higher from here.
(Usually the latest version upon tool release is included in the Sideload folder of the tool, you can either sideload it or copy it to recovery and flash it manually)
Q: I get an error "Cannot open file" on MAC, what should I do?
Open the terminal, go to your application path and paste this command:
Code:
chmod +x LxMultiTool.app/contents/macos/*
Q: What do I need to do in order to be in Fastboot or in ADB mode.
Fastboot mode will be detected only while being in bootloader.
ADB mode will be detected from Recovery (custom) and actual ROM with USB debugging active.
Refresh button needs to be used in order to check for what mode you are in.
Q: Are there any other software that I need to install in order to run this tool?
On Windows and MAC everything is bundled, so nothing needs to be installed, just run.
On Linux you need to install from your package manager libQt5Core, libQt5Widgets, libQt5Gui, libQt5Network.
If it's not enough, use ldd LxMultiTool in terminal to find out what you're missing from your environment.
Q: I have an yellow/orange/red text screen during boot, what's that?
When you unlock you usually get the Orange screen and it's normal, but if you really want to know what's this about, give a reading to this.
Q: Hey, my device is not detected, why?
On windows, you need to manually install the USB drivers, they are not included and probably they won't be included in this tool.
Also, make sure you click the connection Refresh button after connecting the device to your PC.
Q: What do i need to do in order to install a custom ROM?
1. Unlock Bootloader.
2. Flash a custom recovery of your choice.
3. Flash an insecure kernel (boot).
4. Flash custom ROM with no problems via recovery.
All those things are found and can be done via this tool.
Q: Hi, i just downloaded this tool, how do i use it?
First, extract the folder somewhere.
After that, run LxMultiTool.exe on windows by double clicking it, LxMultiTool on linux and the same on mac.
Q: Do I need android-sdk installed or something else?
No! This tool uses it's own supplied binaries for adb and fastboot, if you have android-sdk installed it will be ignored anyways.
This tool is fully portable and stand-alone.
Q: I get an error while trying to unlock the bootloader -> FAILED(remote: oem unlock is not allowed), what now?
Starting with Android 5.0, you need to enable Bootloader Unlocking from the developer settings, in order to do that, follow these steps:
- Enable Developer options
- Enable USB Debugging
- Look for the ‘OEM Unlock’ Option and toggle it.
Q: How do I use the return to stock feature?
First download the latest package from here, then extract the contents (there is an archive in the archive) untill you get the a folder like angler-mda89d
that contains the images, that folder needs to be copied in the /Data/StockPackages folder in order to be visible.
Easier steps -> Get your device in bootloader -> Start the tool -> Hit refresh -> go to Stock -> hit open folder -> copy the extracted folder with the name angler-xxxxxx in there, hit F5 or Right-click + Refresh -> you should see the folder in there like in the following screenshot. Thanks @ursa08 for the screenie.
Q: How do I enable Developer options?
- Launch the Settings
- Scroll Down and Tap on About Phone(or About Device)
- Locate the Build Number Section
- Tap on the Build Number Option 7 Times
- Go Back to the Main Settings Page
- Scroll Down and Tap on Developer Options
Q: Hi, i just bought a phone what should i do now?
Well, you firstly need to unlock your bootloader...
Q: What is logcat?
Well, you can pretty much use google for that answer, but to put it short, is that thingy that tells you what is happening behind the scenes of your phone.
It is usually used for debugging and entertaiment(?).
When you report an error/bug to somebody, it will be a blessing to provide a logcat (logfile)!
Q: What is a Custom Recovery and why do i need one?
A custom recovery is that thingy that let's you flash .zip files, use your logic and you wil get it why you need one.
Q:There are others guides/tutorials out there, should i check them instead of this?
If you manage to get things done using this one, no, otherwise yes, note that some could be outdated...
Q:What is sideload and how do I use it?
Sideload is a function from adb that let's you flash a zip file while in recovery directly from your PC.
Please note that you need to be in sideload mode on your recovery before doing this.
To enter sideload mode, in TWRP go to Advanced -> ADB Sideload -> Swipe to sideload​
Sources: ​The official and original repository can be found here.​
Bug reports/Feature requests: ​If you have any bug, or you consider a feature to be a must-have, please use the issue functionality on github for more traceability here.​
Licensing: ​Please note that this tool is open source and released under GPL v3 licence which can be read here.
Make sure you understand at least the short version of the license that's provided in the tool before using it or before contributing/forking and other related stuff.​
Tech and stuff: ​Some additional marketing for stuff used in this tool
Qt - An awesome cross-platform IDE
Vmware - For letting me test this tool on all platforms (Linux and MAC).
Icons8 - A nice platform for good-looking FREE icons. (Big thanks!)
UnixUtils - For the sed utility for Windows.
AndroidFileHost - For the awesome file-management platform for developers.​
Donations: ​Even though this tool is provided free of charge, full open-source, donations are very welcome to support the future development of this tool and to buy me a beer while coding future improvements on it.
This section will also include the hall of fame for donors, as well as on the github repository.
Special thanks for donations:
- @john7760
​
Disclaimer:​I will not be responsible for smashed screens, bricked phones or any other things that you can accuse me of, i've done this tool to help people, use it at your own risk and consider giving a THANKS if you use it and like it.​Please consider leaving some feedback, what to improve, what could be done better, what annoys you, it really helps me improve the tool.
Also, to avoid useless threads on general, Q&A or useless posts, please read the FAQ section upside, it's like a Mini-Guide!

Thanks!
I think there will be more people. Need to run a better window.
Windows7 64bit, part of the code.
Now, I have a simple editing of it.Make it look good.:laugh::laugh:
Download link:
https://mega.nz/#!nQBiDL7J!aDd9BhKtRw2tuYrpD7fImUXMn_Hl-qmUzwqKY13bYTc

Getting an error
FAILED(remote: oem unlock is not allowed)

Skies/SANKE said:
Thanks!
I think there will be more people. Need to run a better window.
Windows7 64bit, part of the code.
Now, I have a simple editing of it.Make it look good.:laugh::laugh:
Download link:
https://mega.nz/#!nQBiDL7J!aDd9BhKtRw2tuYrpD7fImUXMn_Hl-qmUzwqKY13bYTc
Click to expand...
Click to collapse
Well, I've looked at your edit and I don't understand what looks better than mine... It might be subjective though...
Pikezer1337 said:
Getting an error
FAILED(remote: oem unlock is not allowed)
Click to expand...
Click to collapse
Will investigate this problem and I hope I will get a solution fast
Edit: The information from this link might help with your problem.

I am running Arch Linux.
My shell is ZSH.
I downloaded and extracted, and ran zsh (filename).
I wanted to go with option 1 and got this
Code:
[= LG Nexus 5X - Multi Tool v0.1 - Linux =]
[1] Unlock bootloader. (via fastboot)
[2] Relock your bootloader. (via fastboot)
[3] Flash Recovery menu. (via fastboot)
[4] Backup and restore. (via adb)
[5] Recovery sideload. (via adb)
[r] Reboot menu.
[l] Logging menu.
[q] Quit.
Select your option:
1
menu:23: command not found: bootloader
127 [email protected] ~/Android/5XMultiTool.v0.1 % :(
any ideas?

paOol said:
I am running Arch Linux.
My shell is ZSH.
I downloaded and extracted, and ran zsh (filename).
I wanted to go with option 1 and got this
Code:
[= LG Nexus 5X - Multi Tool v0.1 - Linux =]
[1] Unlock bootloader. (via fastboot)
[2] Relock your bootloader. (via fastboot)
[3] Flash Recovery menu. (via fastboot)
[4] Backup and restore. (via adb)
[5] Recovery sideload. (via adb)
[r] Reboot menu.
[l] Logging menu.
[q] Quit.
Select your option:
1
menu:23: command not found: bootloader
127 [email protected] ~/Android/5XMultiTool.v0.1 % :(
any ideas?
Click to expand...
Click to collapse
The problem should be fixed in the V0.2, the Linux and MAC versions are not tested before posting, so bugs could still be around there...

added to index

Hi all, imusing linux and just tried to unlock my 5X. it worked but my question is, it is normal that it formated automatically?
after reboot, i have to start all over again with my account and setup.

Yes it's normal

Thanks mate, I'm new with nexus devices. One last thing, do I have to locked again or its OK leave it like that since on every reboot its showing me that I'm unlock. Sorry and thanks
Sent from my Nexus 5X using Tapatalk

You can leave it like that as long as you can deal with that message on every boot. If you lock it, you would have to unlock (and wipe) again if you ever want to flash anything again. Personally, unless you want to stick with the stock ROM OTAs, I'd leave it unlocked.

Would you confirm your Tools Re-Lock feature works with Custom Recovery (TWRP) without bricking device?

Born<ICs said:
Would you confirm your Tools Re-Lock feature works with Custom Recovery (TWRP) without bricking device?
Click to expand...
Click to collapse
Usually, locking your device does not brick anything, if everything works fine before locking, everything will work fine after locking, you are only limited after locking.

Lexmazter said:
Usually, locking your device does not brick anything, if everything works fine before locking, everything will work fine after locking, you are only limited after locking.
Click to expand...
Click to collapse
.
Would you mind answering the question?
With custom recovery, TWRP, installed and unlocked what happens when you use your Tool to go back to Lock?
Have you tested?
Thanks

Born<ICs said:
.
Would you mind answering the question?
With custom recovery, TWRP, installed and unlocked what happens when you use your Tool to go back to Lock?
Have you tested?
Thanks
Click to expand...
Click to collapse
To be honest I never locked my bootloader, didn't found a reason to, so I didn't tested.
But technically speaking, the only thing that happens is that you cannot flash other custom recoveries (fastboot stuff basically) without unlocking again and wiping all the stuff on your device.

OK, thank you. ReLocking to flash factory image was what I was thinking. I read doing so can lead to bootloop. Just trying to make note of things to avoid doing.
Cheers

You can lock and unlock your bootloader as much as your heart desires without consequence

skulldreamz said:
You can lock and unlock your bootloader as much as your heart desires without consequence
Click to expand...
Click to collapse
Well, wiping your data partition can be a pretty big consequence...
-edit-
You used to be able to use BootUnlocker for Nexus Devices to lock and unlock the bootloader from within the OS, but it looks like that's a no-go on the 5X...

I'm new to the nexus devices, but if I unlock the bootloader and root, will I loose both if I take an OTA update?

owenrg said:
I'm new to the nexus devices, but if I unlock the bootloader and root, will I loose both if I take an OTA update?
Click to expand...
Click to collapse
You will definitely lose root. I don't know about the bootloader since I've never taken an OTA, but I would guess that, unless there are bootloader changes in the update, your bootloader would stay unlocked. And to my knowledge the bootloaders are pretty much never updated for incremental OTAs.

Guide for noobie

Hi,
I'm currently waiting for buy the Xperia XZ. I check some of XDA's thread and with Sony's smartphone I'm still afraid. So I want to know if there is a thread gathering all the detailled step to root, install TWRP, flash latest firmware, install custom ROM etc... ?
Thanks a lot

[Guide] Here is the DHGE guide for rooting SONY devices 2019-04
Changelog at the bottom of this post.
nathan30 said:
if there is a thread gathering all the detailed step to root, install TWRP, flash latest firmware, install custom ROM etc... ?
Click to expand...
Click to collapse
No - but you can find all you need to know here in this forum or in the devices-fora later than Z3+ or SONY-cross-device.
https://forum.xda-developers.com/crossdevice-dev/sony
Good introductory (written for devices before Z3+):
https://forum.xda-developers.com/crossdevice-dev/sony/noob-guide-to-sony-ericsson-xperia-t3209012
It is still valid but the 2015 and newer devices are not rootable anymore as described thanks to DM-Verity.
For rooting the current device you have to open the bootloader.
Any claims to the contrary found "on the web" are only tricks to have you install "interesting" software on a Windows PC.
Do you want root?
A classic post to help you decide
No:
wait for the OTA-updates from SONY (over the air - prosaic?)
don't like waiting or want to downgrade: get Flashtool http://www.flashtool.net
it comes with Xperifirm that finds you the latest ROM
https://forum.xda-developers.com/cr...xperifirm-xperia-firmware-downloader-t2834142
Unfortunately Xperifirm only finds the latest ROM (the only available on SONYs servers) so you better keep your downloads (>2 GBytes each) or find an older ROM in case you need it (xda has a search function). Here you'll find some ROM-versions: https://xpericheck.com
since my Xperia XZ/XZ1 I occasionally have problems with Flashtool that it requires a FSC-script which does not come with it or can not easily be copied from a similar device.
Now I use Newflasher https://forum.xda-developers.com/cr...gress-newflasher-xperia-command-line-t3619426 by @munjeni. This is a command line tool that for me unfortunately only works under Windows (have JDK issues under Debian).
You unpack the ROM (ftf-file) and place the newflasher.exe in the directory where you unpacked to. Then you start the device in flash mode (power on while holding the volume down key) and run the tool from the command line as administrator/root.
If you do not delete userdata.sin you will initiate the equivalent of a factory reset (aka loose all your data and settings!). For an upgrade within the same Andoid version I always delete userdata.sin before newflashing.
Yes:
As stated above, you need to unlock the bootloader to modify the system software on your device. Fortunately SONY gives (for non-carrier-locked) devices the option to unlock the bootloader.
Check if unlocking is allowed: in the service menu (dial *#*#7378423#*#* or *#*#SERVICE#*#* ) check under "Service Info"->"Configuration" the line "Bootloader unlock allowed:"
If you read anything other than "Yes" Stop here!
No: flashing another SONY Rom ("Customized CountryX") does not help you.
Hint: there is an app "SONY service menu" in the app-repository (F-Droid or Google).
OK - you can Now it is your last chance to save your device keys or "backup the trim area partition"
You should do this if you ever want to return to a SONY "blessed" state. e.g claiming service in countries where warranty is not for devices with unlocked bootloader or you want to sell it.
There are some device specific kernels out there whose authors state that they mitigate all DRM issues once the TA is restored. I guess you need these kernels otherwise restoring the TA locks up your device ...
Otherwise do not bother with restoring the TA-partition. Doing so after the next steps will soft brick your device.
Now you have to prepare your PC with some drivers in order to start the backup process:
Go to SONY's developver world http://developer.sonymobile.com
Under "Downloads" you will find the drivers for the XZ or any other device http://developer.sonymobile.com/downloads/drivers/xperia-xz/
These drivers are for Windows, do not bother if you are running a free operating system.
To get fastboot running you might additionally have to find the "fastboot_driver" in the download area. Put the content of the ZIP-file into the directory where you you unzipped the device driver and install it via right-clicking on the file android_winusb.inf.
Install these drivers if you are a Windows user. Under Windows 8 and newer there could be problems with installing "non signed" drivers.
Do a web/xda search to circumvent this security measure of Microsoft or do click on reboot while holding the shift-key and figure it out yourself.
http://www.flashtool.net/win8drivers.php
When you are installing: You also need to install the programs adb and fastboot.
https://forum.xda-developers.com/showthread.php?t=2317790
If you are running a free operating system: search for adb/fastboot or Android SDK in your repository and install these.
Running Linux it helps to insert the udev-rule mentioned in http://www.flashtool.net/lininstall.php otherwise you have to run esp. fastboot with root-privileges (not recommended, although the udev rule saves no punches ...)
On Android on your SONY device you have to be root to save a partition - catch 22 :crying: ...
https://en.wikipedia.org/wiki/Catch-22
Don't fear the ... / catch: For Android Marshmallow ROMs, e.g. up to version 39.0.A.3.30 of the Xperia XZ ROM, exists an exploit of the copy on write function in the Linux kernel that gets you root privileges temporarily.
On newer devices where there is no Marshmallow ROM with a vulnerable kernel available you are out of luck until another exploit is found.
Follow https://forum.xda-developers.com/crossdevice-dev/sony/universal-dirtycow-based-ta-backup-t3514236
Hint: In post #21 is described how to restore the TA (read the last sentence! -> you have to flash a stock ROM after restore).
If it does not work the first time let the tarnished bovine do its stride several times more.
Or: Repeat the process until success.
If you are already on Nougat you must downgrade the system ROM (see above) to use the exploit and backup the TA-partition.
The latest exploit that is available for devices that came out with Oreo uses a different exploit.
Search for this exploit in the specific forum or on "Sony Cross Device". If you are already on Pie you have to download an Oreo ROM for your device.
This is similar to the procedure described above that has the Xperia XZ in mind.
TA-partiton backed up?
Now the non-reversible part:
Under http://developer.sonymobile.com/unlockbootloader/ you request an unlock code.
READ, READ what SONY have written there!
- You will lose some DRM functionality: https://forum.xda-developers.com/z3-compact/general/loss-drm-keys-t2890936
- Your device will factory reset. You have a backup?
You can get the IMEI-number from the original package of your phone (if you have good eye sight and nobody swapped the boxes) or pull a tab from the side of the phone (you do not want to do that) or print a screen shot of the relevant page of your service menu or head into settings->about device->status->IMEI-Info.
You follow SONY's instructions to unlock the bootloader and hold your breath as after a long reboot everything on your device is wiped. On the newer devices you get an ugly warning "the device can't be trusted anymore".
NEVER EVER enable the MyXperia software from now on!
On some devices this in combination with an unlocked bootloader will hard brick your device.
Here was a link to fxpblog where they destroyed two devices.
Hey, you have been warned. With the TA-backup you always can return to the chicken den.
Become a "developer"
- Tap seven times on the build number of your device. (settings->device info)
- then enable "OEM unlocking" (new for the 2016 and later devices like XZ) and "USB-debugging"
You have read the SONY advice?
Next decision: Root stock ROM or go Custom Rom?
I am VERY happy with LineageOS on a Tablet Z and other devices in my household. I liked the Resurrection Remix ROM on my SAMSUNG phone.
Your mileage may vary: Testing a ROM and reversing will cost you with a proper backup minimum 4-5 hours.
If you choose a custom ROM:
- read the thread to get a hunch if you really want to install it (get over the off topic noob questions and annoying full quotes)
- Follow the instructions of the first page of the ROM-thread to install it. If you can not do this: stop or be prepared for searching and learning.
From February 2017 until May 2017 I had eXistenZ N on my Xperia XZ and like the UI tuning modifications. This "ROM" does not come pre-rooted it is a patch for the stock ROM (match the versions exactly!) that enhances the settings/look.
On SONY devices I recommend rooting stock ROMs.
Shortcut: Pie users can proceed to step 7 here
Having a custom kernel might still be advantageous for you.
You need a custom (or modified stock) kernel (aka boot image) with DM-Verity and SONY-RIC OFF.
This kernel has to be in sync with your ROM. Flashing an unsuitable kernel (e.g. MM-kernel on N-Roms) will result in a boot loop aka "soft brick".
You even can bake one yourself (no easy task) if you find/adapt the sources for your device. -> first stop SONY developer world
This is might be easy! THANKS to the efforts of @AndroPlus, @janjan and others.
You have to look into the device specific fora to find a proper kernel for your ROM-version.
They have also included many patches to improve battery life, mitigate some (e.g. camera) issues from the loss of the device keys ...
Download the kernel and recovery for your device and ROM-version and follow the kernel makers' instructions.
On devices where there is no custom kernel, you can try patching the stock kernel to switch off RIC and DM-verity. In reality behind the scenes it is a bit more than just patching (=modifying) the kernel. You also get some updated init-scripts and as a end result a new boot.img
Very useful is [PoC][Work in progress] Trim Area Proof Of Concept developed by @munjeni
These scripts not only prepare a stock kernel for rooting but also put your TA backup from above to such a use that you regain the DRM-features lost by opening the bootloader! So you do not need a custom kernel with partial DRM-fixes!
For Oreo it is more complicated (it might be easier to search for a suitable boot.img aka kernel and I have not tested it on Pie but see next step):
@serajr enhanced a script specifically for Xperia X Performance, XZ and XZs
https://forum.xda-developers.com/showpost.php?p=74724162&postcount=2793
Under Linux I had to set the executable attributes on the shell scripts and binaries (chmod +x).
You get the required kernel.elf via the tools menu in Flashtool. Dump "kernel.sin".
I started applying the scripts to the Stock ROM in May 2017 since eXistenZ ROM lagged a bit behind in security patches and Android version:
- flashed stock ROM via Flashtool or Newflasher
- prepared a patched boot image with PoC and my kernel...sin and TA.img and answered all questions with "yes" (hit return each time)
Code:
./ta_poc kernel.sin TA.img ramdisk
I am on Debian as operating system.
On Windows you just run the provided batch files and follow the instructions here and in the thread for the scripts.
- flashed the resulting boot image with fastboot flash boot boot.img and test it works. Service menu/Security: keys provided YEAH
- flash recovery and from there root with SuperSU and flash Titanium Backup
- restored my apps with their data via Titanium Backup
==============
Some hints:
==============
Most of these commands emit useful info on the command line - read it, post their error messages if you are stuck.
Version numbers of the software used speeds diagnosis of problems. Often a good advice: "Use latest version."
adb reboot bootloader or switching OFF the device and then pressing the "volume up" button while plugging the USB cable gets you into fastboot mode. You see a black screen and the blue LED light.
I normally do not flash the kernel-ZIP-file via recovery but unpack it and flash this: fastboot flash boot boot.img
To get into recovery mode:
Switch OFF your device. Press the "power" button shortly to switch ON and hold "volume down" button more than 5 seconds (or when you see the yellow LED light on some devices).
Or: adb reboot recovery
If you can not get into recovery (e.g. AndroPlus has no kernel for your latest SONY ROM):
fastboot boot TWRP_latest_version.img
I use an SD card (content there survives factory resets) and there a directory "for_recovery" well stocked with the zip-files I intend to flash. In TWRP you can tell the file manager on what storage (internal, SD-card, USB ...) it will find the flashable ZIP-files. The default is "internal".
Pressing the Power button and "volume up" for about five seconds gives you a hard reset.
Good if you are totally struck - just flash a SONY ROM for your device with Flashtool and all the wipe boxes checked or use Newflasher (overwrites most partitions including your data).
If you like to read about the haarrrdddd way:
https://forum.xda-developers.com/z4-tablet/help/enybody-root-t3154926
The first rooting of a DM-Verity secured device in 2015. Thanks to SONY for releasing source code and binaries.
Rooting - aaahh, finally
Flash the latest Magisk (up to late 2017 I used SuperSU which still works) from recovery.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
https://www.chainfire.eu/ Find the latest SuperSU from there. You will not find it there any more since Chainfire has sold the rights to the utility. I endorse Magisk since that is open sourced on GitHub.
No: flashing a custom kernel and recovery does not root your device.
For Android Pie users: On my Xperia XZ1 I can skip step 6 completely!
Just install/upgrade to the latest Pie ROM and flash Magisk and install the Magisk app.
Bonus: Debloat the device
https://forum.xda-developers.com/search/forum/2522?query=debloat
Nowadays I use a debloat script written by @serajr for my devices https://forum.xda-developers.com/xperia-xz2/development/oreo-debloat-script-v1-0-t3798979,.
I edit (comment out) the debloat_list.sh in order to keep "com.google.android.apps.maps" and "com.sonymobile.email" which I both use.
mine (you screened my script?):
flash the attached ZIP-file
View attachment xtrm_debloat.flashable_ew_2016-12.zip
found in https://forum.xda-developers.com/xperia-z5/general/discussion-bloat-sony-xperia-z5-t3518860 probably original work by @ganeshbiyer
=============================================================
With opened bootloader you will not get OTA updates any more!
You have to check with the Xperifirm program if there are newer ROMs for your device.
I have not had any problems with installing e.g. a Swiss ROM over a Central Europe. There could be some worries when switching continents.
Download the desired ROM via Xperifirm and follow the instructions of Flashtool to flash the device (over USB update = OUU :laugh.
Accept the use of the FSC script.
Repeat the steps 5 to 6(7) for any other/newer SONY ROMs you flash followed by step 4 (if necessary).
If a wipe is needed I prefer the full wipe in TWRP compared to checking the boxes in Flashtool.
Or use Newflasher without flashing userdata.sin (just delete the file) in case of an upgrade.
=============================================================
CHANGES to this Guide
2019-04-23 updated for Pie, endorsed Newflasher, added link to serjars debloat script, link ckecks
2018-02-28 clarified getting kernel.elf for self patching, some typos, link ckecks
2018-01-31 link for better suited ta_poc added, toned down AndroPlus endorsement, added Magisk
2017-06-25 added link to xpericheck (find older ROMs), added hint for restoring TA for those TLDR-guys
2017-06-02 added procedure for patching stock kernel as alternative to custom kernels
2017-02-05 added recommendation for eXistenZ N ROM
2017-01-25 new URL for SuperSU, typos
2017-01-18 corrected the advice for booting into TWRP
2017-01-17 added info on fastboot driver for Windows users

DHGE said:
No - but you can find anything here or in the devices-fora later than Z3+ or SONY-cross-device.
https://forum.xda-developers.com/crossdevice-dev/sony
Good introductory (written for devices before Z3+):
https://forum.xda-developers.com/crossdevice-dev/sony/noob-guide-to-sony-ericsson-xperia-t3209012
It is still valid but the 2015 and newer devices are not rootable anymore (as described) thanks to DM-Verity.
For rooting the current device you have to open the bootloader.
Any claims to the contrary found "on the web" are only tricks to have you install "interesting" software on a Windows PC.
Do you want root?
No:
wait for the OTA-updates from SONY
don't like waiting or want to downgrade: get flashtool http://www.flashtool.net
it comes with Xperifirm (at least for my linux machines) that finds you the latest ROM
https://forum.xda-developers.com/cr...xperifirm-xperia-firmware-downloader-t2834142
Unfortunately it does not find many older ROMs anymore so you better keep your downloads (>2 GBytes each) or find an older ROM in case you need it (xda has a search function).
Yes:
As stated above, you need to unlock the bootloader to modify the system software on your device. Fortunately SONY gives (for non-carrier-locked) devices the option to unlock the bootloader.
Check if unlocking is allowed: in the service menu (dial *#*#7378423#*#* or *#*#SERVICE#*#* ) check under "Service Info"->"Configuration" the line "Bootloader unlock allowed:"
If you read anything other than "Yes" Stop here!
No: flashing another SONY Rom ("Customized CountryX") does not help you.
Hint: there is an app "SONY service menu" in the app-repository (F-Droid or Google).
OK - you can Now it is your last chance to save your device keys or "backup the trim area partition"
You should do this if you ever want to return to a SONY "blessed" state. e.g claiming service in countries where warranty is not for devices with unlocked bootloader or you want to sell it.
Otherwise do not bother with restoring the TA-partition. Doing so after the next steps will soft brick your device.
Go to SONY's developver world http://developer.sonymobile.com
Under drivers you find the drivers for the XZ under "Downloads" http://developer.sonymobile.com/downloads/drivers/xperia-xz/
These drivers are for Windows (which version?), do not bother if you are running a free operating system.
Install these drivers if you are a Windows user. Under Windows 8+ there could be problems with installing "non signed" drivers. Do a web/xda search to circumvent this security measure of Microsoft. http://www.flashtool.net/win8drivers.php
When you are installing: You also need to install the programs adb and fastboot.
https://forum.xda-developers.com/showthread.php?t=2317790
If you are running a free operating system: search for adb/fastboot or Android SDK in your repository and install these.
Running Linux it helps to insert the udev-rule mentioned in http://www.flashtool.net/lininstall.php otherwise you have to run esp. fastboot with root-privileges (not recommended, although the udev rule saves no punches ...)
You have to be root to save a partition - catch 22 :crying: ...
For Android Marshmallow ROMs, precisely up to version 39.0.A.3.30, exists an exploit of the copy on write function in the Linux kernel that gets you root privileges temporarily.
Follow https://forum.xda-developers.com/crossdevice-dev/sony/universal-dirtycow-based-ta-backup-t3514236
If you are already on Nougat you must downgrade the system ROM (see above) to use the exploit and backup the TA-partition.
TA-partiton backed up?
Now the non-reversible part:
Under http://developer.sonymobile.com/unlockbootloader/ you request an unlock code.
READ, READ what SONY have written there!
- You will lose some DRM functionality: https://forum.xda-developers.com/z3-compact/general/loss-drm-keys-t2890936
- Your device will factory reset. You have a backup?
You can get the IMEI-number from the original package of your phone (if you have good eye sight and nobody swapped the boxes) or pull a tab from the side of the phone (you do not want to do that) or print a screen shot of the relevant page of your service menu or head into settings->about device->status->IMEI-Info.
You follow SONY's instructions to unlock the bootloader and hold your breath as after a long reboot everything on your device is wiped. On the newer devices you get an ugly warning "the device can't be trusted anymore".
Hey, you have been warned. With the TA-backup you always can return to the chicken den.
Become a "developer"
- Tap seven times on the build number of your device. (settings->device info)
- then enable "OEM unlocking" (new for the 2016 devices like XZ) and "USB-debugging"
You have read the SONY advice?
Next decision: Root stock ROM or go Custom Rom?
Well - my opinion - for the newer SONY devices I have not found a recommendable custom ROM yet. I am VERY happy with a generic CyanogenMod on a tablet Z in my household. Do not ask me about the sad story of CyanogenMod as of late 2016...
Your mileage may vary: testing a ROM and reversing will cost you with a proper backup minimum 4-5 hours.
If you choose a custom ROM:
- read the thread to get a hunch if you really want to install it (get over the off topic newbie questions)
- Follow the instructions of the first page of the ROM-thread to install it. If you can not do this stop or be prepared for searching and learning.
On SONY devices I recommend rooting stock ROMs.
You need a custom kernel (aka boot image) with DM-Verity and SONY-RIC OFF.
This kernel has to be in sync with your ROM. Flashing an unsuitable kernel (e.g. MM-kernel on N-Roms) will result in a boot loop aka "soft brck".
You even can bake one yourself (no easy task) if you find/adapt the sources for your device. -> first stop SONY developer world
This is easy! THANKS to @AndroPlus
AndroPlus has also included many patches to improve battery life, mitigate some (e.g. camera) issues from the loss of the device keys ...
https://forum.xda-developers.com/xperia-xz/development/kernel-andropluskernel-v01-t3475240
AndroPlus has kernels for other devices too. Look into the specific device forum for a custom kernel,
Download the kernel and recovery for your device and ROM-version and follow AndroPlus' instructions.
Some hints: (most of these commands emit useful info on the command line - read it, post it if you are stuck)
adb reboot bootloader or switching OFF the device and then pressing the "volume up" button while plugging the USB cable (hooked to your PC! we need DC power for all this) gets you into fastboot mode. You see a black screen and the blue LED light.
I normally unpack the kernel-ZIP-file and flash this: fastboot flash boot boot.img
You get into recovery mode on booting by pressing the "volume up" button when you see the yellow LED light.
If you can not get into recovery (e.g. AndroPlus has no kernel for your latest SONY ROM):
fastboot boot TWRP_latest_version
I use an SD card (content there survives factory resets) and there a directory "for_recovery" well stocked with the zip-files I intend to flash.
Pressing the Power button and "volume up" for about five seconds gives you a hard reset.
If you like to read about the hard way:
https://forum.xda-developers.com/z4-tablet/help/enybody-root-t3154926
The first rooting of a DM-Verity secured device in 2015. Thanks to SONY for releasing source code and binaries.
Rooting - aaahh, finally
Flash the latest SuperSU from recovery.
https://download.chainfire.eu/1019/SuperSU
No: flashing AndroPlus or TWRP does not root your device. You'll have to flash Chainfire's ZIP-file!
Bonus: Debloat the device
https://forum.xda-developers.com/search/forum/2522?query=debloat
mine (you screened my script?):
flash the attached ZIP-file
View attachment 4000189
With opened bootloader you will not get OTA (over the air - prosaic?) updates any more!
You have to check with Xperifirm if there are newer ROMs for your device.
I have not had any problems with installing e.g. a Swiss ROM over a Central Europe. There could be some worries when switching continents.
Download the desired ROM via Xperifirm and follow the instructions of flashtool to flash the device. Accept the use of the FSC script.
Repeat the steps 5 to 6(7) for SONY ROMs followed by step 4 (if necessary).
If a wipe is needed I prefer the full wipe in TWRP compared to checking the boxes in FlashTool.
Click to expand...
Click to collapse
Woaw, thanks a lot for your awesome answer !
I receive my phone today, I'll follow your instructions

@DHGE your guide is well put, and I've not had any problems so far (I used a slightly different version of the Xperia ROM since the version you specified didn't show up, but it worked just fine, is sitting on Android 6.0, and I have the TA backed up).
I've obtained the unlock code from Sony's developer site, but I've still yet to get their email with the instructions on where to shove the code. Its been about two or three hours now, and it was sent to a Gmail address (which has received other mail since). I tried generating a new code to make sure the email was right (it was), and it spat out the same unlock code, so I'm guessing its just based off of the IMEI.
Question is: what does one do with the unlock code? I can't imagine the instructions would be different for each person and am not sure how long it may take Sony to email the Gmail account...

k2trf said:
What does one do with the unlock code?
Click to expand...
Click to collapse
Follow the steps on SONY's website where you obtained the unlock code.
Look at the big link at the right bottom after all the warnings...

Somehow I missed that completely, and just latched onto it saying to wait for the instructions via email. Honestly, I don't even know why they think it necessary. Anyone playing with unlock codes damn sure better be familiar with ADB and fastboot already, or be learning as they go. >_>

Hi,
there something I can do to roll back if I didn't backed up my TA partition?
thanks

bigkekko said:
Hi,
there something I can do to roll back if I didn't backed up my TA partition?
thanks
Click to expand...
Click to collapse
Roll back to recover TA? Unfortunately not.

[Root] H901 - For Newbies!

None of the methods in this thread are my own work. I struggled with getting my phone rooted for a long time and spend 10s of hours on the process. I had never rooted before and was therefore unfamiliar with all the terms, unfamiliar with how to complete all the recommended checks to ensure one had the right model, etc. There were several helpful threads but most approach the subject with the assumption that one knows something about the process. In this post I lay out what worked for me in a step-by-step way and what you have to do to achieve my results.
#1 Ensure you have a H-901 motherboard and not the Korean F600 motherboard by checking the sticker, and checking “About Phone” -> “Hardware Info” -> “Model number” in settings. These must both be LG-H901…from what I can tell the community has only developed technique for the H-901 variant.
#2 Get a micro SD card and load it with Magisk https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445 , and if you have Marshmallow or Lollipop and want Nougat (much better experience IMHO), load the files in this thread: https://forum.xda-developers.com/tmobile-lg-v10/development/h901-t-mobile-nougat-v30b-twrp-t3639203 And maybe this thread as well (read both and then decide): https://forum.xda-developers.com/tm.../h901-t-mobile-nougat-v30c-flashable-t3744648
#3 Ensure you have unlocked your bootloader. (apparently only for T-mobile LG v10s since other carriers lock the bootloader) The FWUL virtual machine root method will not work if you have not done so. This is an entire process in itself. The following 2 videos which show how to root android 6.0 or earlier (process will not work with Nougat, 7.0, since some fastboot commands are missing). https://youtu.be/OtXlokk6JkQ , https://youtu.be/PPLwFGxLQA4
Also, this thread may be helpful. https://forum.xda-developers.com/tm...t-mobile-bootloader-factory-unlocked-t3236224 , download the nexus root toolkit here for easy ADB command entry http://www.wugfresh.com/nrt/ —we will only use the “Advanced Utilities” -> ”Manual Input” -> ”Launch CMD Prompt”. When it prompts you to select a phone, select the first option and then for android version select Android *** Any. Don’t use any of the other commands because they are not configured for your device.
If you get a “waiting for device” error while attempting the fastboot oem unlock command in the above thread, see: https://forum.xda-developers.com/tmobile-g4/help/fastboot-waiting-device-t3489789 Great video which shows how to change drivers. You will need to do this, I found a number of drivers that were already on my PC from google and Samsung worked although I didn’t have the specific one mentioned in the above thread. Don’t be afraid to experiment… you can always try another driver. And don’t require it to be hardware compatible. Ignore the warning message: https://youtu.be/nQjg6ePnGAc
---------------------------------------------
NOW that you have your bootloader unlocked you can proceed to actually flash the TWRP image as per this thread: https://forum.xda-developers.com/tmobile-lg-v10/general/root-h901-nougat-t3773942
Notes before beginning:
-To enter download mode to begin: Plug a USB cable into your phone with your phone powered off, hold down on the Vol Up button and plug the USB cord into your computer. It should immediately boot into download mode. Exiting Download mode after flash: pull battery…no damage will be done.
-To enter recovery after flashing TWRP: power off the phone then hold both the down volume and power at the same time. When you see the black LG screen briefly release the power button and then press it again while not letting the volume down up. You will see a screen asking if you want to delete all user settings. Say YES (via the volume and power keys—no touch input). You will see a screen asking if you want to delete all user data. Say YES (the data is only deleted if TWRP loads successfully) You will briefly see the black LG bootup screen. TWRP or factory recovery will load. Or if you did not unlock your bootloader, it will say recovery is corrupted and cannot be trusted, and then boot normally without changing your settings or deleting files.
-Additional note: as of 7-23-18 some commands had changed:
From V20 forum, Brian (runningnak3d) has moved to gitlab.com. So instead of github.com, we have to use a new git repository that Brian created in gitlab.com.
cd
mv lglaf lglaf_BAK
git clone https://gitlab.com/runningnak3d/lglaf
cd lglaf
git pull
git checkout v10-miscwrte
There are additional comments in the thread. Some timeout errors may be solved by: 1 - Download the VirtualBox extension pack: https://download.virtualbox.org/vir..._VirtualBox_Extension_Pack-5.2.8.vbox-extpack
2 - Go to File / Preferences / Extensions / click the + and browse to where you downloaded it.
3 - Once installed, with the VM off, right click on the VM, and go to settings. Click on USB, and pick USB 3.0. If your machine doesn't have a USB 3 port, pick 2.0.
But frankly, simply up arrow after a timeout error to load the last command on the command line and hit enter again. Simply keep doing this until it works. You know it works because no dialog appears for several minutes before informing one of success.
**Upgrade to Nougat after Flashing TWRP and booting to Recovery steps: (I did a full wipe as suggested by this thread: https://forum.xda-developers.com/v20/development/h918-recowvery-unlock-v20-root-shell-t3490594 before flashing the v30b upgrade then full Nougat zip, and then flashing Magisk. I flashed the 3 zips sequentially. I was afraid Nougat would not boot successfully because the zip files are less than 2 gb combined but success! You may want to also flash the 30c upgrade before flashing Magisk for a total of 4 zip flashes. I did not try this. However doing all this means no backups are done so if there is a problem you may have to flash a KDZ with the LG UP tool (don’t ask me how).
As a final note, I cannot answer specific questions about the various processes provided or errors you may encounter that I have not listed in this write up since I have not experienced them. A bit of research on your part may be required, but this post should provide you with a huge head start compared to where I started. Good luck!

Methods to get unlimited mobile hotspot, very useful if you're on the $50 MetroPCs (owned by T-mobile) unlimited plan. All you $70 T-mobile plan suckazzz! https://forum.xda-developers.com/tm...ited-tetherting-hotspot-t3825144#post77249285
I would actually recommend using a USB tether client and forgoing root access if tethering is your only objective and you are trying to be efficient with your time. However, with root you can install all these cool apps!: https://www.digitaltrends.com/mobile/best-android-root-apps/
The following caught my eye:
-Rec: screen record
-liveboot: boot animation (does not work with Magisk)
-Servicely: checks to see which apps are using a lot of battery and lets you suppress them
-Adblock Plus
-Titanium backup: very powerful phone backup application & bloatware remover look into for quickly switching over to a different lg v10
-Greenify: put apps into hibernation
-System tuner: get lots of info about you phone but be careful making changes
-ES file explorer: dig into the android system
-Disk digger: recovers deleted files (photos only?)

[GUIDE][ROOT] QLink Scepter 8 Tablet (Gen 1 & Gen 2) | Bootloader Unlocking & Rooting Guide

QLink Scepter 8 Tablet​By Hot Pepper Mobile
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Bootloader Unlocking
& Rooting Guide
For Gen 1 & Gen 2 Models​
TABLET MODELS & VARIANTS:
For those members familiar with the firmware restoration thread, there are a total of four model variants of the QLink Scepter 8 tablet: two variants of the Gen 1 model, and two variants of the latest Gen 2 model. Determining which Scepter 8 you have is a very simple two-part check. First, if you don't already know your Android OS version, go to device Settings> About tablet, and locate your Android version. If you are running Android 11 (Go Edition), you have the original Gen 1 model. If you are running Android 12 (Go Edition), your tablet is the latest Gen 2 model. Secondly, you will need to locate the device S/N in order to determine your tablet variant. Your S/N is printed on the manufacturer's label affixed to the exterior of the tablet's rear housing. From the Android OS, you can also locate your S/N by opening device Settings>About tablet>Model. Regardless of whether you have the Gen 1 or the Gen 2, the first two letters of your S/N will be either CF or MD. This is the codification of your tablet variant. To alleviate some of the legwork of rooting, and to keep this thread simple to follow, I have provided boot images pre-patched for Magisk v25.2 systemless root support. I have categorized the download links for each of the boot images in accordance with the respective model and S/N variant. To avoid potential bugs, instabilities, boot loops and the like, it is crucial that you download the boot image that corresponds with your model & variant. ​​OVERVIEW:
This guide outlines step-by-step instructions for unlocking the bootloader and rooting all variants of the Gen 1 & Gen 2 QLink Scepter 8 tablet. This guide also includes a detailed section on properly installing the ADB, fastboot, & USB device drivers on your Windows PC or laptop, as well as steps to troubleshoot & manually update these drivers in the event the tablet is not being recognized while in fastboot mode.
DISCLAIMER:
Unlocking your bootloader and rooting your device are both procedures that carry inherent risks. Because these procedures involve modifying the device from it's stock factory configuration, it is possible to corrupt, damage, or even render your tablet completely inoperable. By proceeding further, you are assuming sole responsibility for the integrity and operability of your device, therefore absolving me of any liability in the event something goes south. I have, however, tested these guides and feel confident that things will go smoothly as long as you follow the instructions carefully. Moreover, I encourage all members to read the instructions fully before starting the steps, in order to first gain a fundamental understanding of the concepts and methods involved.
PLEASE PLAY NICE & FOLLOW XDA RULES:
This thread was created with the intent of being a noob-friendly forum. This simply means that new and inexperienced members are fully welcome here, and will be provided with extra guidance and assistance if needed. Please keep in mind that XDA is a global community of developers, enthusiasts and device users. As such, and although English is the only permitted language in the forums & threads, not all members speak English as their first language, and often rely on text translation tools when asking questions & posting. Accordingly, it is very common for words to be misconstrued, meanings to be misinterpreted, and the context as a whole lost in translation. I ask members to be patient, compassionate and respectful to others on this thread. Those members with the knowledge to do so are urged and asked to help newer members, and recall back when you were new here and others helped you.
Please help me with keeping this thread on point by ensuring that all subject matter herein be kept relevant to the topics of rooting and OEM unlocking the QLink Scepter 8. Any posts about other devices or subject matter run afoul of XDA rules and are subject to removal by moderators -- and potential sanctions imposed upon the offending member. Moreover, an on-topic thread keeps things organized and easier to follow. Thank you for your consideration.
PREREQUISITES:
To unlock the bootloader and root the QLink Scepter 8 tablet, you will need a laptop or PC running on Windows 7/8.1/10/11. (A Mac or Linux machine can also be used. For purposes of this guide, however, I am focusing on a Windows setup.) You will also need the OEM-supplied or a quality equivalent micro USB to USB-A data sync cable. Last but not least, you will need to install compatible USB device drivers for ADB & Fastboot on your PC/laptop. I have included the 15-Second ADB Driver Installer below, under the DOWNLOADS section. This Installer will configure ADB & Fastboot system-wide, and installs the universal Google USB device drivers. I would encourage members to first read the instructions in their entirety prior to actually starting the guide.
•INSTALLING USB DEVICE DRIVERS•
This section is included to install and configure ADB, Fastboot and the proper USB device drivers on your Windows computer. This section can also be used to troubleshoot and fix issues involving your tablet not being recognized by Windows while connected in fastboot mode. If you have already installed the ADB & Fastboot tools (& the proper USB device drivers), and you are not experiencing fastboot recognition issues, you may skip this section and proceed to the bootloader unlocking section.
Many members have reported issues with device recognition while in fastboot mode. I have also noticed a persistence problem with Windows drivers on this tablet. I can manually update the driver using Windows Device Manager, enabling fastboot recognition; yet, once the tablet is disconnected from my PC the updated driver does not always persist, requiring a manual driver update each time fastboot mode is needed. Follow these steps to enable fastboot recognition of your device.
• 1. If you have not yet done so, install the 15-Second ADB Installer from the link below on your Windows PC or laptop. Open the utility and follow the prompts to install the ADB & Fastboot drivers. Next, opt to install ADB system-wide. Lastly, you will be prompted to install the Google USB device drivers. Select Y and install them. You should see an interface informing you that the drivers were successfully installed. NOTE: If you get a warning notification that the drivers are unsigned, select the option to install anyway;
• 2. With your tablet powered off, hold the Power and Volume Down buttons simultaneously until the QLink logo appears, at which time you release the Power button but continue holding Volume Down. When a green Android graphic appears on your display, you are in fastboot mode;
• 3. Connect your tablet to your Windows machine using the OEM-supplied or a quality equivalent micro USB to USB-A data sync cable;
• 4. Open a command window in the path of your ADB/Fastboot directory. Execute this command:
Code:
fastboot devices
If properly connected, the command window will return an alphanumeric string which is synonymous with your tablet serial number. If this occurs, you are finished with this section and may proceed to the instructions for unlocking the bootloader/rooting. If the command window displays Waiting on Any Device, or if your serial number is not displayed, continue with the following steps;
• 5. Keeping your device connected to your Windows PC/laptop, right click your Windows Start icon and select Device Manager. Locate your tablet in the menu. It will likely be located under either the Portable Devices or Android Device heading;
• 6. Right click your device and select Update Driver. Next, select Browse My Computer for Drivers. On the next screen choose the option for Let Me Pick From a List... Now you will see a list of drivers to select from. Depending on the manner in which Windows recognized your tablet in the Device Manager menu, the driver selection menu can vary. If you see an option for Android Device, select that option and then select Android Composite ADB Interface. Or, you may be directly presented with options for Android Bootloader Interface, Android ADB Interface and Android Composite ADB Interface. In any event, choose Android Composite ADB Interface and then click Next. Click Yes in the Update Driver Warning dialogue screen, at which time the drivers will be installed.
• 7. Return to your command window and again execute the fastboot devices command. If your serial number is displayed, your drivers are now properly installed. If you are still experiencing fastboot recognition issues, try using another data sync cable, change USB ports on your computer, and/or reinstall the drivers using the 15-Second ADB Installer.
I. UNLOCKING THE BOOTLOADER:
If you plan on rooting your tablet, this step is mandatory. If your bootloader is already unlocked and you only wish to root your device, skip down to the rooting instructions in the next section below.
WARNING: Unlocking your bootloader forces the device into a factory data reset, which will effectively wipe all saved user data from the device. Make a backup at this point if there are files and media on your tablet that you wish to keep.
INSTRUCTIONS:
1. Enable Developer Options on your tablet by going to device Settings>About tablet and tap Build number approximately seven times. Android will notify you that Developer Options are enabled; this menu will appear under device Settings>System>Advanced.
2. Enable USB Debugging and OEM Unlocking in the Developer Options menu. NOTE: Users have reported the OEM Unlocking option being greyed-out unless you are signed in to your Google account.
3. Now to boot into fastboot mode, and this particular step is extremely important. Android 10 introduced a new fastboot mode for dynamic partitions, known as FASTBOOTD, which is relocated from the bootloader to userspace. This particular fastboot mode supports resizeable partitions within the dynamic scheme, and enables the user to create, resize and delete various logical partitions. However, FASTBOOTD mode cannot be utilized to unlock the bootloader, and will not recognize the unlock command. As such, the user must rely upon legacy fastboot mode in order to unlock the bootloader. From stock recovery mode, you may simply choose the option to reboot to bootloader. DO NOT CHOOSE THE OPTION TO ENTER FASTBOOT, as this option will boot to FASTBOOTD. From the Android OS, you can boot into legacy fastboot mode by executing:
Code:
adb reboot bootloader
Once you see a green Android graphic appear in the center of your display, you are in the correct fastboot mode.
4. Connect your tablet to your PC/laptop using the OEM-supplied or a quality equivalent micro USB to USB-A data sync cable. Next, open a command window in the path of your ADB/Fastboot directory. Check your connection by executing this command:
Code:
fastboot devices
If you are properly connected, the command window will return an alphanumeric string synonymous with your device's serial number. If you do not see this, there is a problem with communications between your tablet and PC/laptop. To troubleshoot the issue, switch to another USB port, try another data sync cable, and/or reinstall the ADB/Fastboot drivers on your PC or laptop. Also, see my instructions above on installing USB device drivers on your Windows computer;
5. Once a proper connection has been verified, execute this command:
Code:
fastboot oem unlock
Once you see the Okay notification in the command window, your bootloader is now unlocked. Execute this command:
Code:
fastboot reboot
Your tablet will now initiate a factory data reset and then reboot into the initial setup for the Android OS.
II. ROOTING THE QLINK SCEPTER 8
Now that the bootloader has been unlocked, rooting this tablet is very straightforward. Again, I have provided pre-rooted boot image files in the DOWNLOADS section for all four models & variants.
INSTRUCTIONS:
A. Gen 1 QLink Scepter 8​Android 11 (Go Edition)​
NOTE: If your tablet is running Android 12 Go Edition, you're in the wrong place. Skip down to the next section.
1. Download the Gen 1 patched boot image that matches your S/N variant using the links below, and save the file on your PC/laptop in the ADB/Fastboot directory. Note that the file is named patched_boot.img. The flashing command below assumes that you leave this file name unchanged;
2. Go to device Settings>About tablet and tap Build number 7 times or until Developer Options are enabled. (This step is necessary if you unlocked your bootloader using the previous section, due to the factory data reset.) Enable USB Debugging in the Developer Options menu;
3. Power your tablet off. Hold the Power and Volume Down keys simultaneously until the QLink logo appears, at which time you release Power but continue holding Volume Down. The green Android will appear on the display to indicate fastboot mode;
4. Connect your tablet to your PC or laptop using a quality data sync cable. Verify your connection using the instructions in Step 4 of the bootloader unlocking section above;;
5. Once a solid connection is verified, execute these commands:​
Code:
fastboot flash boot patched_boot.img
fastboot reboot
NOTE: Your active boot slot should be boot_a. Regardless, the above command flashes your active slot by default, without having to specify slot _a or _b.
Upon reboot, your tablet will be rooted with the latest Magisk systemless root strategy. If you do not see the Magisk app or the placeholder stub in your app drawer, go ahead and download the latest version from the link below and install the APK on your tablet. Open the Magisk app, grant the prompted permissions, and follow any prompts to complete setting up the root environment.
B. Gen 2 QLink Scepter 8​Android 12 (Go Edition)​
NOTE: If your tablet is running Android 11 Go Edition, you're in the wrong place. Go back to the previous section. .
1.Download the Gen 2 patched boot image that matches your S/N variant and the empty vbmeta.img using the links below, and save the files on your PC/laptop in the ADB/Fastboot directory. Note that the boot image file is named patched_boot.img, and the vbmeta image is named vbmeta.img. The flashing commands below assume that you leave these file names unchanged;
2. Go to device Settings>About tablet and tap Build number 7 times or until Developer Options are enabled. (This step is necessary if you unlocked your bootloader using the previous section, due to the factory data reset.) Enable USB Debugging in the Developer Options menu;
3. Power your tablet off. Hold the Power and Volume Down keys simultaneously until the QLink logo appears, at which time you release Power but continue holding Volume Down. The green Android will appear on the display to indicate fastboot mode;
4. Connect your tablet to your PC or laptop using a quality data sync cable. Verify your connection using the instructions in Step 4 of the bootloader unlocking section above;;
5. Once a solid connection is verified, execute this command:
Code:
fastboot flash boot patched_boot.img
Now, continuing in fastboot mode, you will need to disable dm-verity/Android Verified Boot (AVB) by flashing an empty vbmeta.img via executing the following command:​
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
Next, execute this command to reboot your device:
Code:
fastboot reboot
Upon reboot, your tablet should now be rooted with the Magisk systemless root strategy. If you do not see the Magisk app or the stub placeholder in your app drawer, go ahead and download the latest version from the link below and install it on your tablet. Open the Magisk app, grant the prompted permissions, and follow any prompts to update Magisk and/or complete setting up the root environment.
IMPORTANT NOTE:
In the unfortunate event you have a mishap with rooting your tablet and get stuck in a boot loop, or if your tablet will not otherwise boot into the Android OS, have no worries. My tutorial on firmware restoration for the QLink Scepter 8 will revert your device back to its original stock factory state. You can then return here and give it another try.
QLink Scepter 8 Firmware Restoration Guide
DOWNLOADS:
• 15-Second ADB Installer
• Gen 1 (CF) Patched Boot Image
• Gen 1 (MD) Patched Boot Image
• Gen 2 (CF) Patched Boot Image
• Gen 2 (MD) Patched Boot Image
• Empty vbmeta.img
• Official Magisk Releases / GitHub Repo
THANKS & MENTIONS:
Thanks goes out to Hot Pepper Mobile CEO Shawn Sun and Support Specialist Joshua G for providing stock firmware images for this device.
Also, I wish to recognize and thank @13lack13ox for being a huge help to thread members at times when I was not able.
​

For some reason, I'm stuck on the part where you have to use the fastboot option. So basically, I got my tablet in fastboot mode (the secondary one with the green android graphic), but when I tried to use the adb function, it doesn't detect my tablet. And also, the command, "fastboot devices" doesn't do anything, and when I try to use "fastboot device" it just says waiting for any device and just... stays there, not detecting my tablet. I tried multiple computers, tried both PowerShell and the command prompt with admin privileges, to no avail. For information, it worked when my tablet was on my tablet is the V9 firmware, but it slightly newer since I just updated to V9_20220224... so maybe that might have something to do with it...

64Star said:
For some reason, I'm stuck on the part where you have to use the fastboot option. So basically, I got my tablet in fastboot mode (the secondary one with the green android graphic), but when I tried to use the adb function, it doesn't detect my tablet. And also, the command, "fastboot devices" doesn't do anything, and when I try to use "fastboot device" it just says waiting for any device and just... stays there, not detecting my tablet. I tried multiple computers, tried both PowerShell and the command prompt with admin privileges, to no avail. For information, it worked when my tablet was on my tablet is the V9 firmware, but it slightly newer since I just updated to V9_20220224... so maybe that might have something to do with it...
Click to expand...
Click to collapse
Sounds like you have a common driver issue. Do this: with your device connected to your PC in fastboot mode, right click your Windows start button and open Device Manager. What is your tablet showing up as? We will need to update your driver. I can walk you through it. Did you install the Google driver from the 15-Second ADB Installer? I am nearly finished writing a guide on properly installing the device drivers. I will link it here when posted. It will give you a detailed step-by,-step outline. I don't think it's an issue with the firmware builds. Fastboot detection issues are common with this tablet due to some type of instability with driver persistence. For example, I often need to update my driver every time I use fastboot mode because, for some odd reason, the updated driver doesn't persist once the tablet is disconnected from the PC and then reconnected.

i dont have this tablet but another hot pepper device called the poblano. with that i was able to boot into ffbm from the bootloader and have root adb access. then i ran dd on my boot partition and patched it with magisk and flashed it back
wondering if hot pepper still makes their devices like that or they patched it. either way props to you for getting the fw straight from the oem

luridphantom said:
i dont have this tablet but another hot pepper device called the poblano. with that i was able to boot into ffbm from the bootloader and have root adb access. then i ran dd on my boot partition and patched it with magisk and flashed it back
wondering if hot pepper still makes their devices like that or they patched it. either way props to you for getting the fw straight from the oem
Click to expand...
Click to collapse
The Scepter 8 does not ship with adb root shell (adbd) enabled. In fact, the bootloader was not even intended to be unlocked. The unlock command is disabled in standard fastboot mode. Luckily, the Scepter 8 is integrated with a second fallback fastboot mode, which we were able to use to to the oem unlock.
Many AllWinner tablets and other Chinese devices do, as you pointed out on your Hot Pepper device. When the Scepter 8 was first released I was able to pull a boot image using a Phoenix Suite tool that had been reverse engineered and modded. As luck would have it, I got rid of the tablet and lost my files along with access to the Phoenix Suite tool. So I've been weeks quarreling with Hot Pepper Mobile to provide firmware and the kernel source code. To their credit, the Hot Pepper CEO and support team were very helpful once they understood what I needed. Hot Pepper's software developers are in China, so a language translation issue hindered my request for some time.
Anyway thank you for your kind words and it is a pleasure making your acquaintance.

@64Star I have updated the thread above with some detailed instructions on updating your device drivers. Hope this helps.

Viva La Android said:
@64Star I have updated the thread above with some detailed instructions on updating your device drivers. Hope this helps.
Click to expand...
Click to collapse
It does, I've unlocked the bootloader and now i'm gonna go root it. Thanks for your help!

I have an unfortunate update: When I went to turn on my tablet, I've noticed there was a noticeable crack on the top left corner of the screen... and then when I tried to use it... the touchscreen no longer functions. I have no clue where that crack came from, cause that wasn't there yesterday, and I've kept it safe in a drawer until now, so I have no clue how it's possible. Guess the software isn't the only thing that's cheap, cause my 2020 Moto G Power survived way worse without even a single crack.
TL,DR: Touch screen somehow broke overnight, meaning I can't get past the setup screen, so GG no re, this $10 qlink tablet ****ing sucks.

64Star said:
I have an unfortunate update: When I went to turn on my tablet, I've noticed there was a noticeable crack on the top left corner of the screen... and then when I tried to use it... the touchscreen no longer functions. I have no clue where that crack came from, cause that wasn't there yesterday, and I've kept it safe in a drawer until now, so I have no clue how it's possible. Guess the software isn't the only thing that's cheap, cause my 2020 Moto G Power survived way worse without even a single crack.
TL,DR: Touch screen somehow broke overnight, meaning I can't get past the setup screen, so GG no re, this $10 qlink tablet ****ing sucks.
Click to expand...
Click to collapse
@64Star I hate to hear that but I know exactly how it goes. I've cracked many a screen in my day. But, on a positive note, if you have the extra funds, there are a ton of these tablets available on eBay within the $35 to $40 price range.

Viva La Android said:
@64Star I hate to hear that but I know exactly how it goes. I've cracked many a screen in my day. But, on a positive note, if you have the extra funds, there are a ton of these tablets available on eBay within the $35 to $40 price range.
Click to expand...
Click to collapse
LOL really turning a profit!

13lack13ox said:
LOL really turning a profit!
Click to expand...
Click to collapse
Haha. No doubt

Sorry about the delay on TWRP guys. My mounting issues are actually encryption issues. TWRP isn't decrypting the /userdata or /vendor partitions with the default key. I'm going to chat with one of my friends over at TeamWin and see if I can get a little guidance.

Viva La Android said:
@64Star I hate to hear that but I know exactly how it goes. I've cracked many a screen in my day. But, on a positive note, if you have the extra funds, there are a ton of these tablets available on eBay within the $35 to $40 price range.
Click to expand...
Click to collapse
You really expect me to shell out around 35$ to 40$ on a slow, laggy 10$ tablet just to experiment on? Hahahahahaha....
Spoiler
Perhaps

64Star said:
You really expect me to shell out around 35$ to 40$ on a slow, laggy 10$ tablet just to experiment on? Hahahahahaha....
Spoiler
Perhaps
Click to expand...
Click to collapse
Not really. I was only providing you info as to where they were available. I found one for $19 which is more than I really wanted to give.
As it stands now,.all the lag is gone in mine. I debloated everything that wasn't essential for normal operations. Then I edited the system/build.prop to increase responsiveness and I limited background apps & processes. Finally, I installed a kernel tuner and set the LMK to very aggressive, tweaked the I/o scheduler parameters, and increased entropy from the available pool. And set SELinux to permissive mode. I'm using Nova Launcher Premium with the launcher locked into memory. Believe it or not, the tablet is now very responsive considering the specs. I'm looking into overclocking the CPU a bit, but 1.46 GHz seems to suffice once RAM is optimized. It's a difference in night and day. It's good for a project tablet but that's about it.
There's another government tablet floating around called the Maxwest Nitro 7Q. 4G/LTE supported with a lot better specs. I think I have one located to buy for cheap.

Lots of tweaks it doesnt run too bad just removing bloatware. Would be cool to get your params on your tweaks etc. If you ever got time could you post it up? Maybe the rom you were talking about in another post has all that included? Anyways if not no biggie, this thing is just for playing around on.

13lack13ox said:
Lots of tweaks it doesnt run too bad just removing bloatware. Would be cool to get your params on your tweaks etc. If you ever got time could you post it up? Maybe the rom you were talking about in another post has all that included? Anyways if not no biggie, this thing is just for playing around on.
Click to expand...
Click to collapse
Absolutely. I'll list those for you here in just a little bit. I have a pure stock ROM built with a TWRP installer, but my TWRP has run into a snag. I've reached out to TeamWin for guidance on that.

All in good time, man. Just glad someone with knowledge is doing all this. Wish I could help more. My ability to program and compile is equivalent to stick poking. I've done it once with aosp 6 that was awhile ago.

13lack13ox said:
All in good time, man. Just glad someone with knowledge is doing all this. Wish I could help more. My ability to program and compile is equivalent to stick poking. I've done it once with aosp 6 that was awhile ago.
Click to expand...
Click to collapse
You seem to know your way around the Android OS pretty well. I'm a developer in training myself. Learning every day. Yeah AOSP 6, I still love working with the Marshmallow builds.
Ok first things first. I notice a huge performance boost from some kernel level mods. Here is a link to Kernel Toolkit. Install both APKs. https://mega.nz/folder/QYwA0QTA#O_Zg3h_iVkHOdeyU_yOmLw
First go to the CPU heading and change the scaling governor to Ondemand. Under CPU Governor Params, tap on Performance Profile and select Maximum Performance (you may personally want to scale back to Aggressive or Balanced, depending on your need for battery life). Now, close Kernel Toolkit and restart the app. Next go to the I/O heading. Choose kyber as the I/o scheduler and set the read ahead buffer to 512 KB. Go down to ZRAM and increase to the maximum of 1000 MB. Set Swappiness to 100. Go over to the Profiles heading, create a profile will all settings and give it a name recommended from the list. When complete, tap on the profile, select save settings and then apply settings.
Now go to the menu button in the upper left of the app. Go down and enable Apply Settings on Boot. Select All and set a 5 second delay.
Next, download a build.prop editor from Play Store. There are tons of free ones and any will suffice. Make a backup of your system/build.prop before you tweak anything. Open the editor and grant root permission.
For build.prop edits, locking your launcher into memory helps a lot with responsiveness. Add this line to system/build.prop
ro.HOME_APP_ADJ=1
This basically prevents the launcher from being killed by Android's native LMK.
To increase touch responsiveness, add these lines as well.
debug.performance.tuning=1
video.accelerate.hw=1
Disable the boot animation for faster boot time.
debug.sf.nobootanimation=1
Reboot to enable the tweaks.
Give these a try and let me know your feedback. I'm working on a few more mods to optimize this tablet and I'll keep you posted on those as well.

Thx great changes so far. Yeah more "snappyness" for sure. I'll have to play around and open up as much as i can swap around.
I can't change I/O scheduler though, I get a contact developer message.

13lack13ox said:
Thx great changes so far.
Click to expand...
Click to collapse
Yw. Do you notice a decent improvement?

[ROM] Modified Stock Android 11 (Go Edition) ROM for KonnectONE Moxee m2160 (MH-T6000) 4G-LTE

Android 11 (Go Edition)
Modified Stock ROM​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Assurance Wireless
KonnectONE Moxee m2160
4G-LTE Smartphone
Model No. MH-T6000​
OVERVIEW:
This is a heavily modified build of the stock Android 11 (Go Edition) ROM which comes preinstalled on the KonnectONE Moxee m2160 smartphone. Please note that, while flashing this ROM will not network unlock your device, the ROM does include added support for most GSM based providers on devices which have previously been network unlocked.
In a nutshell, this modified build focuses on the removal of bloatware and a slimmed-down, more responsive stock OS experience. In addition, once installed, the ROM supports full R/W mounting of all logical partitions encompassed within /super. (The unmodified stock ROM, notwithstanding Magisk systemless root, restricts proper R)W mounting of these partitions due to the stringent codebase changes which implemented the dynamic partition scheme back with the release of Android 10.) This ROM also disables force encryption to /userdata (DFE), disables AVB/dm-verity, and includes several mods for improved performance and responsiveness. While certainly nothing special in terms of custom development for the Moxee m2160, this ROM should provide users with a sufficient daily driver ROM with an optimized stock feel.
FEATURES & BUILD INFO:
• Based on firmware build MH-T6000V1.0.0B010
• Kernel version: 4.19.157-perf
• Security patch level: March 5, 2023
• GMS version: 11_202111.go
• VNDK version: 30
• Quick boot sequence
• Systemless root via Magisk v26.1
• Enabled Power Stamina mode for better battery life
• /system mounts R/W
• /system_ext mounts R/W
• /product mounts R/W
• /vendor mounts R/W
• Force encryption of /userdata disabled (DFE)
• OTA notifications & persists disables
• AVB/dm-verity disabled
• Stock launcher locked in memory
• Zipaligned /system/app & /system/priv-app
•Zipaligned /system_ext/app & /system_ext/priv-app
• Zipaligned /product/app & /product/priv-app
• Custom TCP congestion algorithm presets
• Heavily debloated w/minimal Google framework
• Kernel level performance optimizations
• Google Pixel 2 dark bootanimation
• Optimized RAM management
• Schedutil tuned CPU governor parameters
• Enabled fast charging (1100 mAh stable)
• GSM support for network unlocked devices
PREREQUISITES:​
An unlocked bootloader ​
A PC or laptop running on Windows 7, 8.1, 10 or 11​
Smartphone must be running Firmware Build No. MH-T6000V1.0.0B010​
The SDK Platform Tools on your Windows computer (link provided below)​
Installation of the proper ADB & Fastboot device drivers on your Windows computer​
The factory supplied, or a quality sufficient, USB-A to USB-C syncing/charging cable​
A reliable internet connection for downloading the required files ​
NOTE: We will not be using a custom recovery for installation of this ROM, but rather the dynamic user space implementation of fastboot mode, formally called FastbootD. This fastboot protocol was first introduced with the release of Android 10, and is primarily utilized for the management of dynamic partitions (devices with a /super partition).
DISCLAIMER:
This guide involves the invasive procedure of flashing the partitions of your device, thus modifying the configuration of the device from its factory stock state. This is always inherently risky to the integrity and operability of your mobile device. By proceeding further, you are assuming sole responsibility for the functionality and physical wellbeing of your mobile phone, thus absolving me of any liability in the event things go badly. This ROM has, however, been tested thoroughly on my own device with no negative issues. Moreover, in the unfortunate event your device becomes bricked or otherwise inoperable by way of a botched adherence to this guide, my firmware restoration guide for this device can restore both soft and hard bricked phones. Moxee m2160 Unbricking Guide
INSTRUCTIONS:
WARNING:
These instructions include steps for initiating a factory data reset, a procedure which will effectively erase all saved user data, app data, app preferences, photos, videos, music, documents and other media files from your smartphone. Make a backup at this point of all data, files and media that you wish to preserve.​
Download the SDK Platform Tools from the link below and extract the contents of the archive to an empty folder on the desktop of your Windows computer​
Download the ROM from the link below and extract the contents of the archive to your platform tools directory created in the previous step​
Because this ROM has been modified to disable DFE force encryption, it is first necessary to format the /userdata partition. With your phone in a powered off state, press the Volume Up & Power keys simultaneously until the Moxee logo appears on your display, at which time you should release the Power key, but continue holding Volume Up until an Android logo and a corresponding No Command notification appears on your phone display. Now quickly press and hold Power, tap Volume Down and then Volume Up to enter stock recovery mode.​
Use the Volume Down key to navigate to the Wipe data/factory reset option, then press Power to select. Confirm this selection on the next screen to initiate the factory data reset.​
Once the factory reset is complete, navigate to the option to Enter Fastboot, then press Power to select. Your phone should now boot to FastbootD mode.​
In the platform tools folder created in the first step, click on cmd-here.exe, then right click and opt to run it as an administrator. A command window will be launched. Now connect your Moxee m2160 to your Windows computer using a sufficient USB-A to USB-C data syncing/charging cable.​
In order to verify proper fastboot communication between your phone and PC, execute the following command:
Code:
fastboot devices
If properly connected, the command window will yield an alphanumeric value consistent with your mobile phone serial number.​
Execute the following commands once a proper fastboot connection has been verified. Note, the user may copy these commands and paste the full text to the fastboot command window for systematic execution:​
Code:
fastboot flash boot boot.img
fastboot flash vbmeta vbmeta.patched.img
fastboot flash vbmeta_system vbmeta_system.patched.img
fastboot flash vbmetabak vbmetabak.patched.img
fastboot flash vbmeta_systembak vbmeta_systembak.patched.img
fastboot erase super
fastboot flash super super_rw.img
fastboot erase metadata
fastboot erase cache
fastboot erase DDR
fastboot erase modemst1
fastboot erase modemst2
fastboot reboot
** Please note that the super_rw.img file is large in size. Fastboot may initially give a header magic notification error. However, the super_rw.img will then be allocated into a number of smaller sparsechunk files, which will subsequently be flashed to your device one at a time, until complete. Just remain patient during this process. This can take five minutes or more, but the process will not require any user action.​
Upon first reboot following installation, and after completing initial device setup, open your app drawer and search for the Magisk app or its stub placeholder. Open Magisk, grant any requested permissions, and follow any prompts by Magisk to update the version or complete setting up the root environment. If you do not see the Magisk app or stub, download the Magisk v26.1 APK from the link provided below and install the app on your phone. Be sure to then open Magisk and follow all prompts.​
DOWNLOADS:
• SDK Platform Tools r34.0.3
• Modified Stock ROM Package
• Official Magisk Releases / GitHub Repo
BUGS:
Please report any bugs or instabilities you may encounter using this modified stock ROM. Those who know how to submit an official bug report are urged to do so. Otherwise, please give a concise and detailed description of the issue, including photos or screenshots if possible. I will work diligently to patch any reported bugs or instabilities.Moxee m2160 Firmware Restoration & Unbricking Guide​

Instructions were great and I had no problems following them. I did have an error when I first entered the command "fastboot erase DDR" but only because I did not capitalize DDR. My only issue is I cannot get past the phone set up when first booting because it says there is an update and can not pass verification and there is no option to skip. And in my case I don't have a computer still so cannot use qfil to return to full stock to update. Any suggestions?

scottfan81 said:
Instructions were great and I had no problems following them. I did have an error when I first entered the command "fastboot erase DDR" but only because I did not capitalize DDR. My only issue is I cannot get past the phone set up when first booting because it says there is an update and can not pass verification and there is no option to skip. And in my case I don't have a computer still so cannot use qfil to return to full stock to update. Any suggestions?
Click to expand...
Click to collapse
Okay. At the time I completed modifications on the ROM, the latest OTA had not yet rolled out. What I'll do is add another mod to kill the OTA service entirely. That should prevent any issues like you're facing. I'll expedite this task and will let you know just as soon as I've made the fix and changed out the ROM file with the new one. Thanks for your feedback. By the way you won't have to repeat the process, but will only need to flash the super_rw.img file.
Update: I have disabled system updates and OTA notifications. Proved trickier than I thought, since system updates on Android Go Edition are governed by Google Play Services. I had to decompile the Google Services apk, manually disable the individual system update service and listeners, then recompile and reinstall the Google Services core app. I am presently uploading the new super_rw.img.
One thing that should work for you in the meantime, while I get these new files uploaded, is to perform another factory data reset. During initial boot and setup, opt to complete setup offline, without connecting to WiFi or a mobile data network. Accordingly, your device will not be able to check for pending system updates and you should, therefore, be able to complete setup.

Viva La Android said:
Okay. At the time I completed modifications on the ROM, the latest OTA had not yet rolled out. What I'll do is add another mod to kill the OTA service entirely. That should prevent any issues like you're facing. I'll expedite this task and will let you know just as soon as I've made the fix and changed out the ROM file with the new one. Thanks for your feedback. By the way you won't have to repeat the process, but will only need to flash the super_rw.img file.
Click to expand...
Click to collapse
That would be awesome. I really appreciate your help.

scottfan81 said:
That would be awesome. I really appreciate your help.
Click to expand...
Click to collapse
The files should be finished uploading within the next 15 minutes or so. I will then update the download link and will inform you here when that's done.

@scottfan81, the latest files are uploaded and the download link has been updated accordingly.

Viva La Android said:
@scottfan81, the latest files are uploaded and the download link has been updated accordingly.
Click to expand...
Click to collapse
That's great! I just got done with my dinner and going to download it now. I will let you know how it goes. And I did see that I only need to flash the super_rw.img file. So I should know shortly.

scottfan81 said:
That's great! I just got done with my dinner and going to download it now. I will let you know how it goes. And I did see that I only need to flash the super_rw.img file. So I should know shortly.
Click to expand...
Click to collapse
Do a factory reset beforehand. Then flash the super_rw.img

@Viva La Android
I haven't had any luck since my last post. Before I posted about the verification issue I had when setting up my phone I made sure I double checked that I did not have the option to skip the update as you suggested. That was not an option for some reason and that is when I came here. I have followed your steps with the new super.rw.img you updated but I am worse off than I was before. Now I cannot do anything as the phone is not recognizing any network or available WiFi connections. I have tried a factory reset and started over from your first step with no success. I should also include that since flashing the updated super.rw.img file, when the phone first boots the screen quickly flashes black and blue for about 10 seconds before finally starting the set up process then I get 2 error messages. The first being "system UI isn't responding" and second "Android setup keeps stopping" After all of that the setup starts and that's as far as I can go because I can't connect to anything. Trying to give you as many details I can think of. Before the screen flashing when powering on the phone, the boot animation just function properly. Only between the boot animation and setup process do I experience the rapid black and blue screen for roughly 10-15 seconds. I am including some screenshots of the error messages and setup screens showing no connections available. I almost forgot. I also tried manually adding my network and scan qr code with no success.

Unfortunately I have physically damaged my device beyond any hope of restoring it, so I won't be able to support this device any longer -- until & unless I can get a replacement display. But before my device went kaplut, I did test this ROM and had no issues. I wish I could be more help.
I would recommend performing all steps over again from the top -- formatting /userdata before doing anything. Have you tried by completing all the steps over?