Database Info

[Resolved] [Q] HTC MAGIC 32b bricked or can someone help me?

READ THE QUOTED TEXT before starting anything else!
Hey XDA-Community hope u can help me anyway.
I updated from gingeryohi rc5 to rc5.1, restored apps, set some settings and rebooted. Then my phone stucked @ vodafone bootscreen. i wanted to restore it by recovery, but it stucked too-.-
Then i tried to restore a nandroid by adb when running the stuck recovery but didn't work..
so i decided to reset the phone to stock cupcake by bootloader with "sappimg.nbh".
Then it updated some things like system, data, ... after that i had 2 options: Reboot and power off.
I choosed reboot.
The phone stucked again at vodafone screen and reboots again and again and I don't know what to do.
Now I'm on:
SAPPHIRE UNKWOWN 32B SHIP S-ON G
HBOOT-1.33.0007 (SAPP10000)
CLP-10
RADIO-2.22.19.26I
Jul 31 2009, 15:49:25
Before:
Look at my signature
I hope somebody can help me!!!!
Greez
Cokxx
Click to expand...
Click to collapse
OK @ ALL who having the the same problem than on the top described read this instruction to get the solution:
1. Flash SAPPIMG.NBH by BOOTLOADER
2. Press REBOOT. When it can't boot into Android SHUT DOWN
3. MAKE A HARD RESET: PRESS [HOME]+[BACK]+[POWER] and AGREE the question with the trackball and reboot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FINISHED!
--->I assume no liability for damage<---​

If you dint follow the instructions on how to flash, you most probably semi brick't it, meaning you have low level stuff plus kernel initializing but not android runtime.

This happened to me before and I had to delete the android secure file or try using super wipe which more safe. I know how u feel. Good luck just searching around.
Sent from my HTC Vision using XDA App

Hmm.. could it be that there is a wrong kernel on the phone.-> The kernel of my last rom? Can I flash the right kernel via Bootloader or fastboot???

313dash said:
This happened to me before and I had to delete the android secure file or try using super wipe which more safe. I know how u feel. Good luck just searching around.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
1. How I can delete the android secure file? And should I oO.
2. I can't use superwipe because have no recovery anymore... I only have the bootloader....
Eth3n said:
If you dint follow the instructions on how to flash, you most probably semi brick't it, meaning you have low level stuff plus kernel initializing but not android runtime.
Click to expand...
Click to collapse
I don't have to follow any instructions to flash lol. I did it 100 times... The strange thing is that i flashed the rom and it booted and ran. Then i restored some market apps and set settings like display brightness, Ringtone and some other small things. And after i rebooted it stucked at Vodafone (provider) screen :/ But thats not longer important because I restored the phone and i'm only able to use the bootloader. But android still don't work.

Heimdall One-Click Defuse. The easiest way to get CWM installed so you can flash ROMs

introduction
Hey guys, I was trying to figure out how to root my device so I could install CWM, so I could install jellybean or something... I totally forgot I made a one-click CWM installer.
Here is a one-click for the Defuse1.5 kernel by LinuxBozo with CWM installed. It's old, but it's a good launchpad for a stock device.
This works on Windows, Linux and Mac and Windows and Linux. Make sure you follow the in-app directions if you've never used Heimdall.
Instructions
1. reboot into Download Mode
2. click the flash button in this app
3. if any problems, repeat with flash bootloaders option checked
4. reboot into recovery
5. flash rom
6. advanced>reboot recovery you will now see a blue recovery instead of orange.
7. flash rom again
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Usually i show it with the Green Connected icon at the bottom, but I decided to release this as an afterthought. Sorry.
Download
http://files.teamkomin.com/Infuse4G/Infuse4g-Defuse1.5-Kernel-One-Click.jar

Thak you sir, downloading...
Sent from my SGH-I997 using xda premium

Thanks...downloading...

This works on Windows, Linux and Mac and Windows and Linux.
LOL... thank you so much for all that you do !!!
.....still lol.... priceless :good: :good:

AdamOutler said:
1. reboot into Download Mode
2. click the flash button in this app
3. if any problems, repeat with flash bootloaders option checked
4. reboot into recovery
5. flash rom
6. advanced>reboot recovery you will now see a blue recovery instead of orange.
7. flash rom again
Click to expand...
Click to collapse
Quick question, Adam.
In step three, you had wrote, "repeat with flash bootloaders option checked."
Does this package contain GB bootloaders, being a 2.2.1 kernel?
If someone came directly from 2.2.1 and had never had a previous GB bootloader, will they see the distorted rainbow recovery?
I was not sure if this package had bootloaders.
Thanks.

Thanks, but when click on the download link I just get a page that says welcome to nginx...

qkster said:
Quick question, Adam.
In step three, you had wrote, "repeat with flash bootloaders option checked."
Does this package contain GB bootloaders, being a 2.2.1 kernel?
If someone came directly from 2.2.1 and had never had a previous GB bootloader, will they see the distorted rainbow recovery?
I was not sure if this package had bootloaders.
Thanks.
Click to expand...
Click to collapse
I didn't see that problem. Link may be down for a while. Server issues..

Here's a link.

Need help installing rom into bricked nexus s

Hello guys, right now my nexus s is acting up on me. Right now I have matrix rom and when trying to turn on it gets stuck on the booting animation forever. I tried mounting the sd card adding a few roms even the same one and the original gingerbread one and the system does not allow me to flash it trhu clockworkmod. This is what comes up
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
. Do any of you know what this means.?

juan_carlos__007 said:
Hello guys, right now my nexus s is acting up on me. Right now I have matrix rom and when trying to turn on it gets stuck on the booting animation forever. I tried mounting the sd card adding a few roms even the same one and the original gingerbread one and the system does not allow me to flash it trhu clockworkmod. This is what comes up
. Do any of you know what this means.?
Click to expand...
Click to collapse
The picture isnt showing....
But ur recovery may need to be updated.
Can u flash one of ur backups?
If so, boot up and update ur recovery.
Then just make sure u have correct ROM version for ur phone.
I hope that helps.
Vs Nexus S4G using tapatalk2

vidaljs said:
The picture isnt showing....
But ur recovery may need to be updated.
Can u flash one of ur backups?
If so, boot up and update ur recovery.
Then just make sure u have correct ROM version for ur phone.
I hope that helps.
Vs Nexus S4G using tapatalk2
Click to expand...
Click to collapse
There I fixed the picture, but no I cant flash any of my backups because I deleted them for some reason some earlier backup was not working and the second one I delete it by accident. And the roms form my cell I have been getting the right ones from nexusshacks.com and cyanogen website. I was thinking in something more like pushing the rom thru a computers comand prompt thast my next step.

vidaljs said:
The picture isnt showing....
But ur recovery may need to be updated.
Can u flash one of ur backups?
If so, boot up and update ur recovery.
Then just make sure u have correct ROM version for ur phone.
I hope that helps.
Vs Nexus S4G using tapatalk2
Click to expand...
Click to collapse
I found some tutorial in order to push the rom with command prompt but it's not working neither. does any of you know why not or if I'm doing something wrong here the link of the tutorial and at the end I posted whats what the command prompt came up with. http://forum.xda-developers.com/showthread.php?t=1667929

Do you consider updating your recovery and rom?

My next step will be using the odin called tool for restoring everything. I'll let you know how it goes.

failed update :(

So i am trying to update my phone for a few days with the latedt push OTA (6.0)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And when the system reboots, it brings me to the TWRP Bootloader screen.. even if i push the reboot to system button, the update failed to be applied.
Any tips?
(ElementalX Kernel, TWRP & SuperSU - Stock 6.0)
Edit: Sorry for the picture size, i have no idea how to resize)

SebLemery said:
So i am trying to update my phone for a few days with the latedt push OTA (6.0)
And when the system reboots, it brings me to the TWRP Bootloader screen.. even if i push the reboot to system button, the update failed to be applied.
Any tips?
(ElementalX Kernel, TWRP & SuperSU - Stock 6.0)
Edit: Sorry for the picture size, i have no idea how to resize)
Click to expand...
Click to collapse
You have to be stock to update OTA. No special recovery and no root

funnel71 said:
You have to be stock to update OTA. No special recovery and no root
Click to expand...
Click to collapse
So, how can i make sure this message does not appear anymore, or can i just flash the latest image from code.google.com with the update included somehow, and everything will restore like it does now?
(sorry for the uestions, im no pro just yet)

SebLemery said:
So, how can i make sure this message does not appear anymore, or can i just flash the latest image from code.google.com with the update included somehow, and everything will restore like it does now?
(sorry for the uestions, im no pro just yet)
Click to expand...
Click to collapse
You can't flash any official OTAs with TWRP. It's a known fact, nothing you can do about it. Reflash stock recovery, or just use a close to vanilla custom ROM that gets the monthly security updates.

OTA update is not installed

I am offered a new OTA Rom from the updater - I download it and then in the Recover I am supposed to enter my password for the Encryption as my drive is encrypted from the factory.
Phone boots into recovery and after 1 second it boots back to normal. The message for entering the password does not appear
Who can help me?
Thanks Gordon
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Have you replaced your stock recovery with TWRP recovery?

Sathelp said:
Have you replaced your stock recovery with TWRP recovery?
Click to expand...
Click to collapse
No - its the original stock rom. i got the handy as christmas gift. which twrp ist the newest and is there an install documentation?

I take it that it is the original EU ROM? If it's stock Chinese, then ignore this post, stock recovery works ok but I know some sellers put on a copy of EU ROM before selling it, so please check your ROM details first.
There is a newer twrp but the one have been using is the original that says it's a mi 10 pro but it works fine. Here is a link to a word doc that wrote about installing ROMs for the ultra. https://mega.nz/file/6UAhXCxZ#Np2KwhMnl8obmOvp4b-2R9ajo0zrtz3vwefy-Ya3PLs
Just use the section on twrp installation through a PCs fastboot app, then reboot system and use the OTA or flash direct from twrp. Links are in the doc for twrp or use http://mifirm.net. Apparently the latest twrp works ok too but I have not installed it yet or put a link in the doc but here is a direct link from my mega folder https://mega.nz/file/TUh0mLAZ#0jYRCIeAiCJEMW1eIvWzPSWG2MuKJMG5V-wgxtWT80M
If you are on A11, you may need to disable your lock screen password before update but twrp will let you know.
Hope it helps.

Sathelp said:
I take it that it is the original EU ROM? If it's stock Chinese, then ignore this post, stock recovery works ok but I know some sellers put on a copy of EU ROM before selling it, so please check your ROM details first.
There is a newer twrp but the one have been using is the original that says it's a mi 10 pro but it works fine. Here is a link to a word doc that wrote about installing ROMs for the ultra. https://mega.nz/file/6UAhXCxZ#Np2KwhMnl8obmOvp4b-2R9ajo0zrtz3vwefy-Ya3PLs
Just use the section on twrp installation through a PCs fastboot app, then reboot system and use the OTA or flash direct from twrp. Links are in the doc for twrp or use http://mifirm.net. Apparently the latest twrp works ok too but I have not installed it yet or put a link in the doc but here is a direct link from my mega folder https://mega.nz/file/TUh0mLAZ#0jYRCIeAiCJEMW1eIvWzPSWG2MuKJMG5V-wgxtWT80M
If you are on A11, you may need to disable your lock screen password before update but twrp will let you know.
Hope it helps.
Click to expand...
Click to collapse
thank you ... will test it