[Q] Cannot reboot system from Clockworkmod Recovery(Samsung Galaxy Mini 2 GT-S6500D) - General Questions and Answers

Cannot reboot system from Clockworkmod Recovery
Hello, my phone detected that there is an update then i click the update after that it told me to confirm for reboot my phone enter CWM recovery then I clicked on reboot system now. It showed the Samsung Logo and the Splashscreen, but then enters the CWM recovery. I also tried pulling out the battery and then pushing the power button, but it still boots into CWM recovery. Any help? It looks like my phone got messed up and I can only use it in CWM recovery. Help is much appreciated. for everyone information i did root my phone a year ago.

So no problem at all.Wipe the data there and enter into mobile.It should work..

well the thing is i already tried that. i dont remember how many time i wipe it clean. then tried to reboot but still comeback to CWM recovery.

If there are any roms for ur device then fladh it .Of restore the nandroid backup...:thumbup:

wipe dalvik cache

Related

[Q] Accidently Wiped system and almost everything using Team Win Recovery Project v2

Was trying to flash the ICS ROM V5 but it got stuck on the boot animation. I did a factory reset, surprisingly it was still there. So i used "Team Win Recovery Project" aka "twrp-crespo-2[DOT]0[DOT]0RC0[DOT]img" in nexusshacks.com. I went in there to do a factory reset but i wiped the ACTUAL system instead. So when i reboot i am stuck on Google. Unfortunely i only had 1 back up which is in ClockworkMod, but i cant access that. I dont mind my lost files because i can recover that but i want my phone to work again. Can i copy the nexus s contents from another nexus s and place it in my SD and will it work? If you guys have ideas please do reply because i need my phone fixed asap. Bootloader unlocked and rooted using superuser.
nexusshacks.com/nexus-s-root/how-to-root-nexus-s-or-nexus-s-4g-on-ics-or-gingerbread/
okay,am not very familiar with TWRP but your problem doesn't seem that big,you wiped the /system which should not affect your USB storage data (even if you wiped the USB storage it's not a problem),try to boot into the bootloader (volume up + power button) then go to recovery,mount the USB storage and put a ROM on it,then just flash the ROM and your device should boot up normally,i think you weren't stuck at the bootanimation since when you flash a new ROM the first boot could take from 5 to 10 minutes.
i usually do a clean install before flashing a new ROM (format system,data,cache,boot) and the device just boot up normally after flashing the new ROM so it's not a problem if you wiped your system just flash a new ROM.
TigaTiger said:
Was trying to flash the ICS ROM V5 but it got stuck on the boot animation. I did a factory reset, surprisingly it was still there. So i used "Team Win Recovery Project" aka "twrp-crespo-2[DOT]0[DOT]0RC0[DOT]img" in nexusshacks.com. I went in there to do a factory reset but i wiped the ACTUAL system instead. So when i reboot i am stuck on Google. Unfortunely i only had 1 back up which is in ClockworkMod, but i cant access that. I dont mind my lost files because i can recover that but i want my phone to work again. Can i copy the nexus s contents from another nexus s and place it in my SD and will it work? If you guys have ideas please do reply because i need my phone fixed asap. Bootloader unlocked and rooted using superuser.
nexusshacks.com/nexus-s-root/how-to-root-nexus-s-or-nexus-s-4g-on-ics-or-gingerbread/
Click to expand...
Click to collapse
I did this same thing a few weeks ago. I just had to reinstall everything (including the recovery) from fastboot. Worked like a charm.
I used the nexusshack tut to root my nexus had no problems.
You could go into recovery, mount usb storage, find the clockworkmod directory and copy that to your pc..
do a full data wipe and flash a new rom, then install rom manager flash CWM recovery . move the clockworkmod directory back to your phone. boot into recovery and restore you backup.
Just an idea .. not sure if it could work..(take no responsibility is it doesnt)

[Q] Bricked P5100? Help please!

My P5100 had CM10 nightly on it and was running fine until I upgraded to the latest version of CM10 after wiping the cache & Dalvik cache. After the upgrade I couldn't get Google Play to run even after wiping its data and fixing permissions so I tried to do a CWM restore. Unfortunately there was a fault restoring the Data partition and now my tablet is stuck at the animated bootscreen. If I long-press the power button it powers off but immediately restarts. There is no way to start in in recovery or flash mode. I've plugged it into my PC and the Samsung Android ADB interface is showing but the other references to the tablet all have a yellow triangle in Device Manager. I'm hoping some clever person can help me rescue the tablet with ADB. Thanks!
dwl99 said:
My P5100 had CM10 nightly on it and was running fine until I upgraded to the latest version of CM10 after wiping the cache & Dalvik cache. After the upgrade I couldn't get Google Play to run even after wiping its data and fixing permissions so I tried to do a CWM restore. Unfortunately there was a fault restoring the Data partition and now my tablet is stuck at the animated bootscreen. If I long-press the power button it powers off but immediately restarts. There is no way to start in in recovery or flash mode. I've plugged it into my PC and the Samsung Android ADB interface is showing but the other references to the tablet all have a yellow triangle in Device Manager. I'm hoping some clever person can help me rescue the tablet with ADB. Thanks!
Click to expand...
Click to collapse
IF CWM is not working use Odin to flash CWM again then use CWM to flash CM10,
You may need to do a factory reset (full wipe) from CWM.
If all else fails use Odin to flash stock JB ROM
DigitalMD said:
IF CWM is not working use Odin to flash CWM again then use CWM to flash CM10,
You may need to do a factory reset (full wipe) from CWM.
If all else fails use Odin to flash stock JB ROM
Click to expand...
Click to collapse
Thanks but Odin cannot see the tablet to re-flash the recovery.
Downlods mode
Then flash new firmware
sembre said:
Downlods mode
Then flash new firmware
Click to expand...
Click to collapse
That's the problem - I cannot access download mode
UPDATE - it just started in download mode! I can manage from here!!
Just for the record you can install adb on the pc and run the command 'adb reboot recovery'. This will force the tablet to reboot in recovery mode.
Sent from my GT-I9300 using xda app-developers app
Jeez, this has taken up most of the day to fix. I came across many problems I have not previously experienced:
1. When the tablet was stuck at the boot animation and I tried to turn it off by long-pressing the power button it immediately restarted. The only way I could get it to turn off was by long-pressing the power button whilst it was connected to my PC.
2. Flashing the stock ROM with Odin appeared to complete successfully but it would never fully boot, it always got stuck at the black & white Samsung screen. Same problems turning it off as above.
3. Flashing CWM with Odin caused the tablet to reboot into the stock ROM which would not load, in the end I had to untick the "reboot" button in Odin, power it off then manually restart with the Vol- & power buttons.
4. The only way I could get a bootable ROM was by flashing CM10 with CWM. I tried to restore 2 previous CWM backups but on each occasion there was an error restoring the Data partition and I got stuck at the scenario at (1). The backups were made to the external SD card with CWM Touch - is the Touch version unreliable?
I would be really interested if anyone could shed any light on any of this stuff!
For how long did you let it install during the first reboot? It happened to me too, and it took about 10 minutes, maybe even more...
Also, did you try in the "Mount and storage" cwm menu the options "format system", "format data", "format cache" and "format preload" options, prior to re-flashing a ROM? I have read somewhere that for a clean install it's better to do this, as it really clears everything that could mess up the system between two different bases ROMs (like CM and stock).
What I do everytime is using in CWM these 4 "format" options, plus "wipe" system, cache and dalvik, then immediately after this I flash with cwm the new "zip" copied on the card. Then the first reboot is much longer than usual, as at this stage it installs the files, rebuild the dalvik cache etc.
Good luck
dwl99 said:
2. Flashing the stock ROM with Odin appeared to complete successfully but it would never fully boot, it always got stuck at the black & white Samsung screen. Same problems turning it off as above.
Click to expand...
Click to collapse
I think I gave it a good 20 mins to boot. When I got up this morning there was an error message saying that there was no room to install any more apps even though I had very few installed. Settings -> Storage would not calculate the space available so I figured that the partitions had become corrupted. I did the step by step format you described and reflashed & it all seems to be OK now.

ClockworkMod Recovery

Hey Guys,
I am stuck at clockworkmod recovery menu... I am done wipe data/factory reset option, but after this when I have selected reboot system now option, device gets restarted and stucks at nexus logo menu.. I have waited for around an hour but there is no progress after this. Please help me, I have no idea how to go ahead with this.
Just download a ROM for your phone. Adb push it to your device. Wipe data and flash the ROM?

[Q] ODIN Pass but Nothing has changed

Hi Guys, Need some help please!
My P3100 had CM11 on it, and one day it stopped booting, was stuck in the Samsung logo. I got into recovery, did a factory reset\cache and dalvik wipe, but has not helped. I got into the Download mode and tried flashing the stock firmware. Odin takes 92 minutes to complete this process, and I can see "PASS" displayed, but tab still stuck in Samsung logo. Infact, when I reboot to recovery after flashing Stock rom, it still takes me the CWM recovery, while I expected to get into Stock recovery. I have also tried flashing TWRP recovery, I get a Pass message, but takes me to CWM recovery again. I have tried flashing custom ROMs from this recovery, dont get any error, but tab still wont go past the Samsung Logo. Out of ideas now, please help!
Boot into Recovery
- wipe data factory reset
- wipe cache
- wipe dalvic cache
- format system
- flash new ROM (if you flash stock ROM CWM/TWRP recovery will be overwritten during first boot)
I have tried that. Several times. The CWM recovery seems to be permanently stuck to the tab. Even if I flash twrp recovery, the flash is successful, but I go back to CWM recovery.

[Q][Help][Galaxy S6312]Not able to exit from CWM v6.0.3.2 recovery mode

Hi every1! I really want some help. I have Samsung Galaxy S6312 and installed CWM v6.0.3.2 one year ago but didn't flash any rom.
I did factory reset of my phone using recovery yesterday and all went well. But now the problem is it always boots into recovery mode on power up or system boot.
What should I do now ?
I am still able to make a complete backup of my phone and can restore it but again it always boots in to recovery mode.
PS: The first time I installed CWM, the same problem had occurred but I was able to system boot by clearing dalvik cache and wipe partition. But this time even it is not working.
Please help, any help would be appreciated.
Thanks in advance.
amitkumar005 said:
Hi every1! I really want some help. I have Samsung Galaxy S6312 and installed CWM v6.0.3.2 one year ago but didn't flash any rom.
I did factory reset of my phone using recovery yesterday and all went well. But now the problem is it always boots into recovery mode on power up or system boot.
What should I do now ?
I am still able to make a complete backup of my phone and can restore it but again it always boots in to recovery mode.
PS: The first time I installed CWM, the same problem had occurred but I was able to system boot by clearing dalvik cache and wipe partition. But this time even it is not working.
Please help, any help would be appreciated.
Thanks in advance.
Click to expand...
Click to collapse
[ProblemSolved]I think the problem was with the CWM that I had installed using terminal commands. So I again flashed the cwm but this time using Odin.
links that helped me:
flashing using odin:
http://forum.xda-developers.com/showpost.php?p=51338466&postcount=9
how to use odin :
http://galaxyyoungs6312.blogspot.com/2014/01/flashing-stock-rom-to-samsung-galaxy.html
Above link shows the use of odin for flashing stock rom but the procedure is same for flashing cwm.
Thank you all.

Categories

Resources