Welcome to moonshine s-off for the HTC One SV . Developed by Fuses, beaups, and Hyuh. Enjoy.
1.) make sure htc sync is uninstalled
2.) make sure adb and fastboot drivers are working
3.) make sure htc sync is uninstalled
4.) if you are having problems with fastboot, try a usb 2.0 port.
5.) make sure htc sync is uninstalled
6.) make sure other programs that interfere with adb and fastboot are uninstalled (PDANet, Kies, etc.)
7.) make sure htc sync is uninstalled
8.) if you use a third party firewall, be sure to grant access to distiller.exe as it checks for updates
9.) MAKE SURE HTC SYNC IS UNINSTALLED
10.) YOU MUST UNZIP THE ARCHIVE BEFORE RUNNING DISTILLER. DO NOT JUST TRY TO RUN IT FROM THE ARCHIVE.
Downloads available at: http://moonshine.io
beaups said:
Welcome to moonshine s-off for the HTC One SV .
Click to expand...
Click to collapse
Thanks for posting this here and your great work all around!
:good:
I guess it's only for ICS, isn't it?
szympro said:
I guess it's only for ICS, isn't it?
Click to expand...
Click to collapse
No, jelly bean (only for boost mobile is ics).
You have to look at the Software Number.
For ics you can use Supercid and Facepalm S-off (except boost mobile).
All devices now supported
Boost (k2_cl) cricket (k2_plc_cl) gsm lte(k2_ul) and gsm only (k2_u)
All one Sv users can install this, it only takes five minutes. Boost mobile is still in testing, but it fully works.
Thanks beaups and fuses. Without them this wouldn't be possible at all.
Sent from my HTC One SV
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The moon has shine on me tonight.
Thank you, very much. Took me quite a few times to get the correct criteria
Like to thanks oldsplatterhead for his stock rom.
Thanks again.
P.s when HTC releases 4.2 obviously a new hboot will come with it, wonder if moonshine s-off can be carried over? Guess it's too early to ask.... but I have faith it will be cracked.
Sent from my HTC One SV using xda premium
It should be permanent
Sent from my HTC One SV
hi all, this is my first post in one SV forum. s-offed my new device (k2_ul) with moonshine.io few days ago, it all went well and quick.
thanks, moonshine! i'll make a donaton in few days.
Install custom roms
Hi, is there a change that something can go wrong using this method? Because I have used it after htc dev-unlock an rooting, and have S-off, but my phone doesn't install a custom rom. I understand that you have to be S-off to be able to install custom roms, right?
Smellie2 said:
Hi, is there a change that something can go wrong using this method? Because I have used it after htc dev-unlock an rooting, and have S-off, but my phone doesn't install a custom rom. I understand that you have to be S-off to be able to install custom roms, right?
Click to expand...
Click to collapse
If you see, that you are S-Off, you should be S-Off, i think.
And you don't need to be S-Off to flash custom Roms, you also can flash with S-On, but you need to flash boot.img with fastboot then.
As i have seen your phone info, you have hboot 2, that means you had already jb installed. So why do you want to use the stock, odexed rom instead?
old.splatterhand said:
If you see, that you are S-Off, you should be S-Off, i think.
And you don't need to be S-Off to flash custom Roms, you also can flash with S-On, but you need to flash boot.img with fastboot then.
As i have seen your phone info, you have hboot 2, that means you had already jb installed. So why do you want to use the stock, odexed rom instead?
Click to expand...
Click to collapse
I want that because my phone acts weird. It doesn't remember whether I want to use my launcher or Sense, if I put a widget on my homescreen the next day there's a grey area where the widget was, etc. So I thought if I can install a stable rom that might be over.
Smellie2 said:
I want that because my phone acts weird. It doesn't remember whether I want to use my launcher or Sense, if I put a widget on my homescreen the next day there's a grey area where the widget was, etc. So I thought if I can install a stable rom that might be over.
Click to expand...
Click to collapse
Have you tried to do a factory reset?
Sounds a little bit like a default (with data partition).
old.splatterhand said:
Have you tried to do a factory reset?
Sounds a little bit like a default (with data partition).
Click to expand...
Click to collapse
No, I haven't done that. I can with a guide root my phone and tablet, but I don't know what happens when I do something like that. Do I have to get rooted then again, or doesn't that change all that stuff like rooting and unlocking?
Smellie2 said:
No, I haven't done that. I can with a guide root my phone and tablet, but I don't know what happens when I do something like that. Do I have to get rooted then again, or doesn't that change all that stuff like rooting and unlocking?
Click to expand...
Click to collapse
It doesn't change unlocking or S-Off. It deletes all user data, all you brought to your phone (not external sd, internal sd i'm not sure), but not things in system.
It sets the software itself to the point where the phone came to you.
Worked perfect!! Nice job.
Stallion34 said:
Thx for the answer...
I followed your suggestion but moonshine gives me an adb failure during the proccess...
I want to S-off my device and then try your custom JB rom...
Click to expand...
Click to collapse
You are already on JB, so there is no real profit for you, cause mine is not modded.
Here a quote from another forum (thanks to wetbiker):
wetbiker7 said:
Make sure you have removed HTC sync from you computer. Also, make sure USB debugging is enabled in developer settings on your phone.
If you have HTC sync, make sure that you reboot the pc and the phone so that everything is reset and the files are completely removed from the pc.
Unzip the Moonshine zip that you downloaded and place it in a folder. With your phone fully booted, plug in USB and connect to pc. Click on the distiller and follow the prompts. Also, make sure you have a good charge on your phone because it'll take it between 5 and 10 minutes.
Also, if you are running a custom kernel, you will need to reinstall it after you have finished with Moonshine.
Edit: disable anti-virus and run the distiller as administrator.
Hope this helps.
Click to expand...
Click to collapse
ERROR: run distiller again and READ
what do i miss? i fastboot flashed splatterhand's stock boot.img for k2u...
edit: SOLVED... you shall not use customized roms
Checking for updates......
Please wait....
Test 1: Rebooting into bootloader
Waiting for fastboot (7/60)
Waiting
Test 2: Booting device
Waiting for ADB (27/60)
Device detected.....................
[************************************************************]
Test 3: Rebooting into bootloader (again)
Waiting for fastboot (7/60)
Waiting for ADB (38/60)
Waiting for device
Moonshining (1)......................................
Moonshining (2).............................
Moonshining (3)..................................
Moonshining (4).........
Waiting for ADB (34/60)
Waiting for device
Powering off device, UNPLUG your device, then press VOL-DOWN & Power to enter hboot
All Done, hope you enjoyed the Moonshine!
Click to expand...
Click to collapse
Ok my device is S-Offed too with this fantastic tool !!
thanks a lot !!!
Hi,
I just wonder why every second step in the instruction is this:
beaups said:
make sure htc sync is uninstalled
Click to expand...
Click to collapse
Hi.
Quick question, I'm trying to help someone back in France with this.
If you're on JB (official OTA update) and do this procedure, will you :
- keep your data as they were just before ?
- keep your rom as it was before (ie : will you be able to install the next OTA updates without any trouble) ?
In one word : does this process just does S-OFF or does it change anything else ?
Thanks a lot !
M
Related
This only really applies to those with S-ON Unlocked, HBOOT 1.45.0013. Once we figure out how to get S-OFF on all phones, this guide will become unneeded! In the meantime, this is here for those of us that are S-ON but want to play with ICS.
THIS TUTORIAL ALSO APPLIES TO ANY CUSTOM ROMS THAT REQUIRE A CUSTOM KERNEL.
If you're S-ON LOCKED, go HERE and UNLOCK your phone!
I'm assuming you have
Fastboot set up as a PATH, or copied to the folder you are extracting boot.img to
HTC Drivers installed
Clockwork Recovery
1.) Grab your ROM of choice.
2.) Open up your ROM in 7zip or another file compression program.
3.) Extract the "boot.img" file that's inside to a folder.
4.) Open the command prompt and go to the folder you extracted the "boot.img" file too.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
"cd" in the command prompt stands for "change directory", so you will need to type that before the path to where your boot.img file is located.
5.) Reboot your phone into fastboot mode. To do this, turn off your phone by holding down the "Volume down" and "Power" buttons until the fastboot screen arrives. There should be three Androids on skateboards on the bottom.
6.) Press the power button once on the "fastboot" option. Your phone should now connect to the computer and it should say "fastboot usb" on your phone.
7.) In the command prompt, type the following command:
Code:
fastboot flash boot boot.img
8.) Assuming you've done everything properly, this will overwrite the existing kernel on your phone with the kernel that comes with your ROM.
9.) Now, reboot your phone into Recovery. At this point, flash your ROM by flashing the zip file.
10.) Reboot and enjoy your new ROM!
Thanks to Blue6IX for telling me how to do this and to yogi2010 for making me realize I forgot to tell people to actually flash the ROM itself. Figured I'd make a guide for those that didn't know about it since it's probably hidden somewhere underneath pages and pages of comments on other ROMs.
probably worth stickying for a while till we get to know how to downgrade to an s-offable state?
Amazing work guys.
I'm also lucky the phone I purchased off Craigslist was root able.
Sent from my HTC myTouch_4G_Slide using xda premium
I can confirm this does indeed work as advertised. I'm S-On Unlocked with latest HBOOT, installed pyr-o-ice 1.1.1 yesterday, its running as it should.
ZeikHunter said:
I can confirm this does indeed work as advertised. I'm S-On Unlocked with latest HBOOT, installed pyr-o-ice 1.1.1 yesterday, its running as it should.
Click to expand...
Click to collapse
Nice to hear that
We need this stickied, don't we? Who do we have to contact?
sent from HTC Doubleshot pyroiced
tbalden said:
Nice to hear that
We need this stickied, don't we? Who do we have to contact?
sent from HTC Doubleshot pyroiced
Click to expand...
Click to collapse
We should just get you and Blue moderator status lol
Limewirelord said:
We should just get you and Blue moderator status lol
Click to expand...
Click to collapse
This thread's been reported!
And thusly stickied. Voila!
Will this method work for all of the ROMs we have here for the mt4gs? One I have been looking at is Bulletproof. If I use the same technique you've explained, will I get the same end result?
Just got a MT4GS a couple days ago. It was updated to 1.45.0013. I read up to see that it couldn't be S-OFF'd or rooted due to locked bootloader..."oh crap!". Searched more and ran into this... "hells yeah!" Worked like a charm! Now running Pyr-o-ice desensed...awesome stuff! Thanks a lot!
xzuhto said:
Will this method work for all of the ROMs we have here for the mt4gs? One I have been looking at is Bulletproof. If I use the same technique you've explained, will I get the same end result?
Click to expand...
Click to collapse
yep, it will work!
Awesome I look forward to flashing.
Sent from my myTouch_4G_Slide using Tapatalk
hi, pls excuse my ignorance.
does this method grant su access?
j.books said:
hi, pls excuse my ignorance.
does this method grant su access?
Click to expand...
Click to collapse
All of the ICS roms (and all of the custom GB roms as far as i know) are rooted here, and include the 'su' binary and superuser apk. That's what counts, so short answer:
yes
YESSSSS!!! But got damn I can't wait until S-OFF is a reality. This sucks lol but its better than having Tmobile take over ym phone with retarded apps. Thanks to all you DEV dudes who work hard for this device..
d3athb4dishonor said:
YESSSSS!!! But got damn I can't wait until S-OFF is a reality. This sucks lol but its better than having Tmobile take over ym phone with retarded apps. Thanks to all you DEV dudes who work hard for this device..
Click to expand...
Click to collapse
We'll nail it eventually. It's a tough nut to crack, but at least along the way we found a temporary fix.
We can now go back to S-ON from S-OFF, and the standard response to how to do that for the longest time was 'it's not possible'. Anything is possible with the right amount of effort invested. I am sure we'll come up with some more goodies along the way...some are brewing even now.
I've made S-ON to S-OFF my life's work until it's done, and have mostly given up on everything else I was working on to achieve that end.
There are a few other devs who have been spending a lot of time on this as well, and we are working together and unraveling the issue one layer at a time.
We'll get it, but it's the toughest nut to crack - the manufacturer is doing whatever they can to prevent us from being able to do so...there is a specific effort to block us from doing it that must be overcome.
Meantime, since we don't have a real RUU for this phone on any software version, the search for one came back with the leaked copy of the OTA as an official signed HTC package. ( To me it seemed like a consolation prize after the exhausting search for an RUU...didn't get one, but got at least this )
I'm glad someone went ahead and made a guide for people to use it to at least get unlocked since HTC broke the OTA they actually pushed over-the-air, this package is what it was supposed to be.
Hang in there, we'll get all you guys S-OFFed as soon as we can!
Y'all are doing a kickass job man. I'm sure once this phone is all the way opened up and dev see that, it will gain more publicity. I unlocked my phone with the htcdev.com, but haven't loaded up a rom yet. All I've really done is uninstalled a few bloatware apps, but can't wait until I can have total access to everything and see what this badboy has to offer.
Sent from my myTouch_4G_Slide using xda premium
ok.. noob question, can I flash boot after flashing custom rom?
First off: Thanks are due across the board, as well as to the man who made the .exe Noob-proof app it helped a little bit and worked great
Second: Okay.. I recieved a warranty replacement..new HBoot. following this guide I did all required.
UPON using fastboot command to boot the boot.img it reboots and starts to boot up PyroIce 1.1.2..... which you say isnt right since i need to flash the ROM again in Recovery..
If i Do that it wont boot again and hangs on the MT4GS splash screen, i think it is actually due to the fact that i also flash the adreno drivers patch, but i am not going to try and tinker with it.
bottom line, working... thanks so much guys
shazam1203 said:
ok.. noob question, can I flash boot after flashing custom rom?
Click to expand...
Click to collapse
I've seen that boot.img is where the kernels are, and I've seen that to flash an ICS ROM in that thread that in order to flash an ICS ROM on a MT4GS you need to flash a kernel after the ROM, in the form of a boot.img.
So I'll say, hesitantly, "yes".
Unless, of course, you meant something else. That, or, I misunderstood something somewhere...
---------- Post added at 08:34 PM ---------- Previous post was at 08:18 PM ----------
CoNsPiRiSiZe said:
First off: Thanks are due across the board, as well as to the man who made the .exe Noob-proof app it helped a little bit and worked great
Click to expand...
Click to collapse
I don't know about the dot-exe but I'll agree nonetheless.
CoNsPiRiSiZe said:
Second: Okay.. I recieved a warranty replacement..new HBoot. following this guide I did all required.
UPON using fastboot command to boot the boot.img it reboots and starts to boot up PyroIce 1.1.2..... which you say isnt right since i need to flash the ROM again in Recovery..
If i Do that it wont boot again and hangs on the MT4GS splash screen, i think it is actually because i also flash the adreno drivers patch, but i am not going to try and tinker with it.
bottom line, working... thanks so much guys
Click to expand...
Click to collapse
I don't know much about the whole ROM thing and Android in general. I come from G1 land, where everything was easy . You just flash the ROM and you're done. However, if I understand correctly, here you just flash the ROM you want (ICS whatever) and then the kernel (boot). Did I miss something along the way?
I would think that the kernel should be no different conceptually than the one in Linux (or Windows, or OS-X, or...). It's the interface between the software packages ("Android", plus the apks, framework, all that) and the hardware. So really, I don't see why any ROM shouldn't work as long as your kernel has everything the ROM needs to interface with the hardware and the framework has everything the ROM needs to interface with the software (or the software with the kernel). Do I understand correctly?
[EDIT]
I just reread that... you booted the hboot via fastboot instead of writing it to the phone first... which I guess is smarter than what I did -- cus if it won't work at least you don't brick it that way. Do you have a link to the howto for that? I'm sure it's simple and easy, I just have never done it...
[/EDIT]
Hi mates,
i succesfuly made my international one s s4 supercid and s-off with facepalm. after that i flashed maximushd and that worked flowlesly. great rom! don´t know what was in my mind to command in fastboot "fastboot write secureflag 3". there my problems begun. i searched erverywhere with no solution to get it back s-off. you can´t downgrade hboot 2.16 with ruu. method getting it supercid, a requirement for facepalm, didn´t worked too. so i decided to sent it in to a repair center to fix my problem. my wife asked me to s-off her htc one. i searched in the one forum and found rumrunners s-off. on their website i noticed they are supporting a lot of htc devices, including my one s. i gave it a shot and boom! i´m s-off again!
it´s a universal tool. download the file, extract it and run the soju.exe. follow instructions and you will be s-off!
link to rumrunner.us:
http://rumrunner.us/
all credits to them!!!! thank you guys!!!
a Little how to:
make sure all your drivers are installed.
1. adb: in settings-> development-> usb debugging must be checked! when you connect your device there must be a notification "usb debugging" connected.
2. boot into bootloader, fastboot is highlighted blue. press power butten. now you have "fastboot" red highlighted. connect phone and must turn into red "fastboot usb".
3. htc sync manager must be uninstalled.
4. your device must be rootet.
5. click the link above and read carefully the requirements. better two times!
6. download universal file rumrunner_HTC_0.5.0.zip. and extract it anywhere.
7. reboot phone and pc.
8. go to settings-> power-> disable fastboot. also disable Display sleep.
9. disable any anti virus software and make sure you are connected to the internet with your pc.
10. connect phone to pc, go to settings-> development and uncheck usb debugging than check it again to make sure the pc recognized your device.
11. run soju.exe
Thanks, this worked for me as well. TMOBUS 3.16.401.8, 2.15 HBoot... facepalm and moonshine both would not work after SEVERAL attempts. Rumrunner worked first try, even in Windows.
guythnick said:
Thanks, this worked for me as well. TMOBUS 3.16.401.8, 2.15 HBoot... facepalm and moonshine both would not work after SEVERAL attempts. Rumrunner worked first try, even in Windows.
Click to expand...
Click to collapse
error extracting file......
Use 7zip
you f*cking legend im now S-off
does this work with 2.16 hboot
i personaly dont need this but many of my users do,thanks.
dd98 said:
does this work with 2.16 hboot
Click to expand...
Click to collapse
Yes of course!
Sent from my HTC One S using xda app-developers app
rc420head said:
i personaly dont need this but many of my users do,thanks.
Click to expand...
Click to collapse
They are welcome!
Sent from my HTC One S using xda app-developers app
jonny1974 said:
They are welcome!
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
I am FINALLY S-OFF!!!! Thank you so much OP, this took a while (root access issues with stock), but flashed odyssey and good to go!!!
jonny1974 said:
Use 7zip
Click to expand...
Click to collapse
thats working but the s-off-process ends with error "download update rumrunner.us! enter to exit lol
i had a second cmd window pop up with a apdb error no root in production build or something like that.. what do i do now?
ulmcity said:
thats working but the s-off-process ends with error "download update rumrunner.us! enter to exit lol
Click to expand...
Click to collapse
Reboot your pc and phone. Plug phone in with debugging enabled, disable and enable it again. Run song.exe.
I got an error saying that i don't have adb drivers or usb debugging enabled..
Usb debugging is enabled and I use Cyanogenmod 10.1.3.
How to install adb drivers to get this working?
jonny1974 said:
Reboot your pc and phone. Plug phone in with debugging enabled, disable and enable it again. Run song.exe.
Click to expand...
Click to collapse
1. Download and install HTC sync manager at HTC webside. Than uninstall it.
2. Follow the post above your post.
jonny1974 said:
Reboot your pc and phone. Plug phone in with debugging enabled, disable and enable it again. Run song.exe.
Click to expand...
Click to collapse
the same...
Adb and fastboot is working? Also disable under settings-power-fastboot.
Now i get this error??
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Which Rom is on your phone? On their website is a notice that will not work on every custom Rom, also in the tool. I did that with magioRom, because I was on hboot 2.16. Try it with CyanogenMod if your hboot is lower.
jonny1974 said:
Which Rom is on your phone? On there website is a notice that will not work on every custom Rom, also in the tool. I did that with magioRom, because I was on hboot 2.16. Try it with CyanogenMod if your hboot is lower.
Click to expand...
Click to collapse
I am on cyanogenmod..
I did it now..
I am S-OFF
Greetings, I want to update my HTC ONE X AT & T with the RUU 3.18 because when I install some ROMs as CleanROM, KickDroidXL, VIPER XL, the phone turns itself off and back on I have to go back to, even installing the kernel Beastmod continues switching off only
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
to install the RUU, only run with the phone connected and you? I have already installed the HTCSync...
I also want to update because my phone sometimes gets no signal and I have to put it in airplane mode and then to remove the airplane mode if you hold the cue!!!
Sorry for my bad English
You actually need the 2.15 firmware to stop your problems, but it's a good idea to run the RUU first.
To run the RUU you just connect the phone in fastboot mode and run the RUU program in Windows. Uninstall HTC Sync Manger (leave drivers installed) because it can interfere. Make sure no other programs are running and make sure screen saver/hibernation is turned off. Once the RUU is completed you need to flash the 2.15 firmware package too. You'll find that in Turge's stock Sense 5 ROM thread.
Sent from my Evita.
timmaaa said:
You actually need the 2.15 firmware to stop your problems, but it's a good idea to run the RUU first.
To run the RUU you just connect the phone in fastboot mode and run the RUU program in Windows. Uninstall HTC Sync Manger (leave drivers installed) because it can interfere. Make sure no other programs are running and make sure screen saver/hibernation is turned off. Once the RUU is completed you need to flash the 2.15 firmware package too. You'll find that in Turge's stock Sense 5 ROM thread.
Sent from my Evita.
Click to expand...
Click to collapse
Will try Thank install the RUU, I was just a little iffy because I can read comments from people who have run the RUU and the phone gives them some kind of mistake and not finish installing, with my current phone settings I can run the RUU safe ?
I was thinking of installing the RUU 3.18 as my phone is AT & T (RUU_EVITA_UL_JB_45_S_Cingular_US_3.18.502.6_Radio_0.24p.32.09.06_10.130.32.34_release_signed_With_Partial)
Sorry for my bad English again
Hey Guys, I too have downloaded the RUU specified above, and I am curious if it will work as well.
I'm in the same boat as OP,
Difference is I'm: HBOOT-1.09.0000
I'm very nervous as the last time I ran a RUU file I was S-OFF and SuperCID and managed to hard brick my phone.
Now I'm S-OFF and SuperCID so I'm guessing I can do this? Thanks in advance guys, really appreciate your time, hope the OP gets his problem sorted before I - sorry for the hijack.
EDIT: Do I need to have the HTC Sync Manager installed? I do not have it installed currently and I downloaded and installed drivers located here:
http://forum.xda-developers.com/showthread.php?t=1952426
Jamalje said:
Hey Guys, I too have downloaded the RUU specified above, and I am curious if it will work as well.
I'm in the same boat as OP,
Difference is I'm: HBOOT-1.09.0000
I'm very nervous as the last time I ran a RUU file I was S-OFF and SuperCID and managed to hard brick my phone.
Now I'm S-OFF and SuperCID so I'm guessing I can do this? Thanks in advance guys, really appreciate your time, hope the OP gets his problem sorted before I - sorry for the hijack.
Click to expand...
Click to collapse
s-off + supercid + 3.18 = good to go
Sent from my One X using XDA Premium 4 mobile app
Black!Jack said:
s-off + supercid + 3.18 = good to go
Sent from my One X using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks so much for your prompt reply, sir I really appreciate it I hope the OP also got an answer they were looking for. Again (Apologies for Thread Hijack)
Are the drivers here; http://forum.xda-developers.com/showthread.php?t=1952426 good enough or should I install HTC Sync before bootloader and RUU install?
timmaaa said:
You actually need the 2.15 firmware to stop your problems, but it's a good idea to run the RUU first.
To run the RUU you just connect the phone in fastboot mode and run the RUU program in Windows. Uninstall HTC Sync Manger (leave drivers installed) because it can interfere. Make sure no other programs are running and make sure screen saver/hibernation is turned off. Once the RUU is completed you need to flash the 2.15 firmware package too. You'll find that in Turge's stock Sense 5 ROM thread.
Sent from my Evita.
Click to expand...
Click to collapse
Thanks, RUU was successful!
Nehomar_C said:
Will try Thank install the RUU, I was just a little iffy because I can read comments from people who have run the RUU and the phone gives them some kind of mistake and not finish installing, with my current phone settings I can run the RUU safe ?
I was thinking of installing the RUU 3.18 as my phone is AT & T (RUU_EVITA_UL_JB_45_S_Cingular_US_3.18.502.6_Radio_0.24p.32.09.06_10.130.32.34_release_signed_With_Partial)
Sorry for my bad English again
Click to expand...
Click to collapse
You're good to go. The people who bricked their phone hadn't done their research, they probably had s-on.
S-on + SuperCID + jb RUU = brick.
You have s-off so you're fine.
Sent from my Evita.
run the RUU has been a Success in my Evita, truly thank him for it : D timmaaa now proceed to update to firmware 2.15 : Bueno:
add that to turn on the phone immediately had taken the signal, something that had not to
Results will comment
Sorry for my bad English
So I just got my Sensation today(unlocked, Bell version z710a) and followed this guide(http://forum.xda-developers.com/showthread.php?t=1631861) up to step 4A. The problem is, I forgot to enable smartflash(step 3A) before flashing the rom(same rom attached in step 4A). Now my phone won't boot up and I keep getting a message saying, "touch input stopped"(included pics of what it looks like).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And this message keeps popping up. Sometimes I'll remove the battery and turn it back on and this will come up:
And I will be able to go through the normal setup with the message popping up every 2 seconds. But as soon as I press "finish" after going through the setup, the phone will still not boot up properly and get stuck on either the htc logo or a blank screen.
I would truly appreciate any help, I've tried wiping data and rebooting as well, and I have no idea what to do now. Thanks!
Try running an RUU
Sent from my Sense 5 powered Sensation
@noodleyhead
did you not forget to flashing boot.img too after installing the new rom with manual flashing.. after you know it's that you already forgot to enabled smartflash form 4ext recovery..?
Go to recovery ( remove battery , insert battery , hold volume down and power button )
Wipe data cache ,
Enable smart flash and flash Rom again
Itsakash said:
Go to recovery ( remove battery , insert battery , hold volume down and power button )
Wipe data cache ,
Enable smart flash and flash Rom again
Click to expand...
Click to collapse
I've tried that as well, but get no results. I also tried relocking bootloader and unlocking again, but i still end up and the lockscreen and go through setup wizard, only to end up stuck at the htc logo.
I tried doing RUU also, but I have a Bell Sensation, which is 3.32.666.13, and there isn't an ruu file available for that.
Any other ideas?
JJeamy said:
@noodleyhead
did you not forget to flashing boot.img too after installing the new rom with manual flashing.. after you know it's that you already forgot to enabled smartflash form 4ext recovery..?
Click to expand...
Click to collapse
Yeah i realized afterwards and tried that also, but i get the same results.
ShadowCodeGaming said:
Try running an RUU
Sent from my Sense 5 powered Sensation
Click to expand...
Click to collapse
I was about to, but I have a bell sensation on 3.32.666.13, and I haven't been able to find a download for my particular version. If you know of any others that will work, let me know.
noodleyhead said:
I was about to, but I have a bell sensation on 3.32.666.13, and I haven't been able to find a download for my particular version. If you know of any others that will work, let me know.
Click to expand...
Click to collapse
I think any z710a ruu should work
Sent from my Sense 5 powered Sensation
Ok, I tried wiping data and enabling smartflash, then reflashing the rom, but now when i try to boot it up, it won't go past the white screen with the htc logo, no quietly brilliant coming up.
Anyone else have an idea of what I can try? I'm getting desperate now, nothing seems to be working.
ShadowCodeGaming said:
I think any z710a ruu should work
Sent from my Sense 5 powered Sensation
Click to expand...
Click to collapse
Can you link me to one? I can't tell which ones are z710a and which ones aren't.
If you can find one on here that might work for me: http://www.tsar3000.com/Joomla/index...oads&Itemid=98
or here: http://www.shipped-roms.com/index.php?category=android&model=Pyramid
or anywhere else you might be able to find one.
Again I have a bell sensation 3.32.666.13. I was able to find a zip file here: http://www.androidruu.com/?developer=Pyramid (3rd one down)
but its a zip file, not exe, so not really sure what thats for. Thanks so much for the help!
noodleyhead said:
Can you link me to one? I can't tell which ones are z710a and which ones aren't.
If you can find one on here that might work for me: http://www.tsar3000.com/Joomla/index...oads&Itemid=98
or here: http://www.shipped-roms.com/index.php?category=android&model=Pyramid
or anywhere else you might be able to find one.
Again I have a bell sensation 3.32.666.13. I was able to find a zip file here: http://www.androidruu.com/?developer=Pyramid (3rd one down)
but its a zip file, not exe, so not really sure what thats for. Thanks so much for the help!
Click to expand...
Click to collapse
I think this one http://www.shipped-roms.com/downloa...0U_10.12.9007.21_2M_release_200555_signed.exe but ill have a closer look when I get home in a few hours
Sent from my Sense 5 powered Sensation
ShadowCodeGaming said:
I think this one http://www.shipped-roms.com/downloa...0U_10.12.9007.21_2M_release_200555_signed.exe but ill have a closer look when I get home in a few hours
Click to expand...
Click to collapse
Thanks, but I think that is the older version(from gingerbread I think) and after I searched around I think that one will not work. I may be wrong, so you are certainly welcome to take a closer look whenever you have tim after getting home.
Thanks so much for taking the time to help me! At this moment, my phone will not boot up past the white screen with the htc logo(no quietly brilliant coming up) and I am getting very desperate. I wiped everything that I possibly could in recovery, reflashed the rom after enabling smartflash, and my result is being stuck on the same htc screen. Am I bricked beyond repair? I am seriously getting very scared now. Anyways thanks for helping, any other ideas are welcome.
noodleyhead said:
Can you link me to one? I can't tell which ones are z710a and which ones aren't.
If you can find one on here that might work for me: http://www.tsar3000.com/Joomla/index...oads&Itemid=98
or here: http://www.shipped-roms.com/index.php?category=android&model=Pyramid
or anywhere else you might be able to find one.
Again I have a bell sensation 3.32.666.13. I was able to find a zip file here: http://www.androidruu.com/?developer=Pyramid (3rd one down)
but its a zip file, not exe, so not really sure what thats for. Thanks so much for the help!
Click to expand...
Click to collapse
your version show with zip file in here http://www.androidruu.com/?developer=Pyramid is a update OTA version..not full completed RUU..
anyway may i know what custom rom do you installed before..?, did you already tried another custom rom..?
RUU
noodleyhead said:
I've tried that as well, but get no results. I also tried relocking bootloader and unlocking again, but i still end up and the lockscreen and go through setup wizard, only to end up stuck at the htc logo.
I tried doing RUU also, but I have a Bell Sensation, which is 3.32.666.13, and there isn't an ruu file available for that.
Any other ideas?
Click to expand...
Click to collapse
http://htc.vi8.info/Stock-RUU/
I thing here you will find what you need
JJeamy said:
your version show with zip file in here http://www.androidruu.com/?developer=Pyramid is a update OTA version..not full completed RUU..
anyway may i know what custom rom do you installed before..?, did you already tried another custom rom..?
Click to expand...
Click to collapse
I was following this guide: http://forum.xda-developers.com/showthread.php?t=1631861
and went up to step 4A, and used the same rom linked to dropbox download in that step.
Problem was, I forget to enable smart flash before flashing(step 3A), so I followed extra step 1 in that same thread, which is flashing boot.img, but that didn't work either.
Abdullahku said:
http://htc.vi8.info/Stock-RUU/
I thing here you will find what you need
Click to expand...
Click to collapse
Thank you, but I have a bell sensation, I dont think any of those would work? Or would they?
noodleyhead said:
I was following this guide: http://forum.xda-developers.com/showthread.php?t=1631861
and went up to step 4A, and used the same rom linked in that step(its a version of Android Revolution).
Problem was, I forget to enable smart flash before flashing(step 3A), so I followed extra step 1 in that same thread, which is flashing boot.img, but that didn't work either.
Click to expand...
Click to collapse
just tried installing another custom rom and don't forget to anabled smartflash first...try this ROM
then after that if your phone success to booting normally..then you can make a goldcard to prepare..if sometime while you needed return your phone to the stock..then you don't worried again to searching RUU that are suitable with your phone..
noodleyhead said:
Thank you, but I have a bell sensation, I dont think any of those would work? Or would they?
Click to expand...
Click to collapse
I don't know :\... but also you can try to turn off your device, and remove the battery, and put it back, then press power button + volume up button & choose factory rest, it might work
JJeamy said:
just tried installing another custom rom and don't forget to anabled smartflash first...try this ROM
then after that if your phone success to booting normally..then you can make a goldcard to prepare..if sometime while you needed return your phone to the stock..then you don't worried again to searching RUU that are suitable with your phone..
Click to expand...
Click to collapse
THANK YOU SOOOOOO MUCH. It worked.
noodleyhead said:
THANK YOU SOOOOOO MUCH. It worked.
Click to expand...
Click to collapse
glad to hear that..mate..
now you can make a goldcard to your sd..to prepare..someday while you needed it to return your phone to the stock you just need find the latest RUU..
and just a tip..just do a backup of your rom now first from recovery..before you flashing any other rom again later..
hope you'll enjoy that rom..
Hello guyz, i have problem on my htc one x plus.
I installed cm11 nightly for my on my x plus from here:
http://get.cm/get/qG0
After that my imei has gone blank along with the baseband version.
I did a bit of research and found that by using ruu, u can get the imei back.
So for that i needed turn my s-on to s-off by the foll commands:
adb reboot
if i am not mistaken, while the phone is rebooting i am supposed to put the 2nd command:
adb wait-for-device push firewater /data/local/tmp
The problem here that I think is the phone reboots so fast that i guess the command fails to execute and i get an error saying :
error protocol fault (no status)
So, how to turn off fastboot or quickboot in cm11? There is absolutely no option in the phone. I tried battery settings,power settings, everything!
is there a way to disable fastboot/quickboot in bootloader mode?
plz help!
quantum94 said:
Hello guyz, i have problem on my htc one x plus.
I installed cm11 nightly for my on my x plus from here:
http://get.cm/get/qG0
After that my imei has gone blank along with the baseband version.
I did a bit of research and found that by using ruu, u can get the imei back.
So for that i needed turn my s-on to s-off by the foll commands:
adb reboot
if i am not mistaken, while the phone is rebooting i am supposed to put the 2nd command:
adb wait-for-device push firewater /data/local/tmp
The problem here that I think is the phone reboots so fast that i guess the command fails to execute and i get an error saying :
error protocol fault (no status)
So, how to turn off fastboot or quickboot in cm11? There is absolutely no option in the phone. I tried battery settings,power settings, everything!
is there a way to disable fastboot/quickboot in bootloader mode?
plz help!
Click to expand...
Click to collapse
I don't think you need to be S-on to run a RUU. At least back in my HTC evo 4g LTE days, you didn't. Try running the RUU as S-off.
Evolution_Tech said:
I don't think you need to be S-on to run a RUU. At least back in my HTC evo 4g LTE days, you didn't. Try running the RUU as S-off.
Click to expand...
Click to collapse
i know,u didn't get it!
my device is s-on!
For running ruu,i need to be s-off!
The whole process is mentioned is for that!
quantum94 said:
i know,u didn't get it!
my device is s-on!
For running ruu,i need to be s-off!
The whole process is mentioned is for that!
Click to expand...
Click to collapse
Flash a stock based ROM and try the RUU again. S-on or off shouldn't matter.
Evolution_Tech said:
Flash a stock based ROM and try the RUU again. S-on or off shouldn't matter.
Click to expand...
Click to collapse
okay,will try that...
but i need to flash ruu to get my imei back right?
quantum94 said:
okay,will try that...
but i need to flash ruu to get my imei back right?
Click to expand...
Click to collapse
That should work, yes. However, just flashing a stock ROM may fix it as well.
Evolution_Tech said:
That should work, yes. However, just flashing a stock ROM may fix it as well.
Click to expand...
Click to collapse
i tried searching for stock rom's but all i am getting is ruu....!
could you provide a link for stock rom?!
or better ....could you tell me how to fix the problem i mentioned in my original post!
quantum94 said:
i tried searching for stock rom's but all i am getting is ruu....!
could you provide a link for stock rom?!
or better ....could you tell me how to fix the problem i mentioned in my original post!
Click to expand...
Click to collapse
I found a few, here's one:
http://forum.xda-developers.com/showthread.php?t=2004928
Also, just search through the development here:
http://forum.xda-developers.com/htc-one-x2/development
And I believe this is the problem mentioned in your first post. S-off tool will only work on stock based ROM.
Evolution_Tech said:
I found a few, here's one:
http://forum.xda-developers.com/showthread.php?t=2004928
Also, just search through the development here:
http://forum.xda-developers.com/htc-one-x2/development
And I believe this is the problem mentioned in your first post. S-off tool will only work on stock based ROM.
Click to expand...
Click to collapse
i forgot to mention that mine is HOX+ international version.
thanks for the links!
from the first link,i found a european stock rom. I stay in india, so shud i flash the european one?
There is no stock rom for asia !
Also, is there any way to disable fastboot/quickboot from the bootloader? coz if that's possible,it would solve everything!
quantum94 said:
i forgot to mention that mine is HOX+ international version.
thanks for the links!
from the first link,i found a european stock rom. I stay in india, so shud i flash the european one?
There is no stock rom for asia !
Click to expand...
Click to collapse
I'm not sure, or willing to say, yes to that. I don't suppose you made a backup of stock before flashing custom, did you? This is why you always make a backup of stock.
Evolution_Tech said:
I'm not sure, or willing to say, yes to that. I don't suppose you made a backup of stock before flashing custom, did you? This is why you always make a backup of stock.
Click to expand...
Click to collapse
No i didnt!
is there a way out of this dilemma?!
Evolution_Tech said:
I'm not sure, or willing to say, yes to that. I don't suppose you made a backup of stock before flashing custom, did you? This is why you always make a backup of stock.
Click to expand...
Click to collapse
ok....i looked and i found this option while searching for quickboot in my phone:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
However, in the developer options, there is no such thing!
what to do?