:laugh:This Thread is Dedicated to Galaxy Young Duos Lovers :laugh: <<<<<< ROOT, CWM, ROM, THEME >>>>>> Fully Working CWM is Available
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
<<Specification>>
Samsung Galaxy Young is the latest addition to the galaxy series and it is among the budget android handsets with latest Jelly Bean!!!
So, Here We started a thread with all info. about Galaxy Pocket!
Disclaimer: Rooting Galaxy Young is risky by way of loss of warranty post rooting and also the small risk of data loss or phone damage. You should be aware of such risks which are quite common with rooting. Kindly note that, you must take up this procedure at your own risk. We shall not be responsible for anything that may go wrong with your handset.
Root & CWM.....
Fully Ready Package for Rooting & Flashing CWM !!Without Binary Counter!! to Galaxy Young GT-S6312
Download The Package
Instructions:
1. Unzip Downloaded Package "Root-CWM-6312.zip" & copy to internal memory.
2. Install "Farmaroot.apk" (Thanks to alephzain)
> Open Farmaroot application & Select "Install Superuser"
> Select "Gandalf"
> Done with Success !!!!
> Reboot your phone.. & wait for proper boot up...
3. Install "Busy Box Installer"
> Open & Install Busy Box.
> Done!
4. Install Terminal.apk
> Open Terminal and type following commands:
Code:
su
cd /storage/sdcard0
sh cwm.sh
Done You CWM is ready now.......
Entering in CWM!!
1. Switch off the Phone completely.
2. Press & Hold Volume Up + Home + Power Key.
CWM will appeared!
>Use UP & DOWN key to navigate items & Power key to Selection.
Regards..
Androsamace
Reserve 2
Reserve 3
Reserve 4
I did the sh and it said done. I did reboot and went into recovery.
the problem is now it wont reboot into the normal jellybean? It only boots into CWM recovery now.
What do I need to do to reboot to the normal phone operating system? It keeps rebooting into clockworkmod recovery.
H0wdy said:
I did the sh and it said done. I did reboot and went into recovery.
the problem is now it wont reboot into the normal jellybean? It only boots into CWM recovery now.
What do I need to do to reboot to the normal phone operating system? It keeps rebooting into clockworkmod recovery.
Click to expand...
Click to collapse
Don't use following command:
Code:
reboot recovery
it will stuck at recovery!!
Requesting to all users please please ....... follow my instruction as mentioned on the instruction post,
Entering in CWM!!
1. Switch off the Phone completely.
2. Press & Hold Volume Up + Home + Power Key.
CWM will appeared!
Click to expand...
Click to collapse
you can restore your nandroid backup to restore your original condition......
androsamace said:
Don't use following command:
Code:
reboot recovery
it will stuck at recovery!!
Requesting to all users please please ....... follow my instruction as mentioned on the instruction post,
you can restore your nandroid backup to restore your original condition......
Click to expand...
Click to collapse
So what do you do after installing CWM? You power off then back on? Can you ever type "reboot recovery" after?
H0wdy said:
So what do you do after installing CWM? You power off then back on? Can you ever type "reboot recovery" after?
Click to expand...
Click to collapse
No!
Dont use reboot recovery...
You should go to recovery manually..
As mentioned in instruction.
Sent from my GT-S6312 using xda app-developers app
Not to get too much off topic.
Since I did reboot recovery, I had to reinstall a stock rom so I used odin and flashed:
XXAMD3
4.1.2.
However, now samsung update is saying there's an update available, but it has an issue registering device when I try to apply the update.
Is there a way to install the update another way? Is 4.2.2 out for gt-s6312?
H0wdy said:
Not to get too much off topic.
Since I did reboot recovery, I had to reinstall a stock rom so I used odin and flashed:
XXAMD3
4.1.2.
However, now samsung update is saying there's an update available, but it has an issue registering device when I try to apply the update.
Is there a way to install the update another way? Is 4.2.2 out for gt-s6312?
Click to expand...
Click to collapse
Update support only stock condition... unrooted!
Sent from my GT-S6312 using xda app-developers app
OK, I got it working. I was used to doing reboot recovery from another phone.
When are you releasing CM9?=)
BTW, is 4.2.2 out yet?
Can i use this to my Galaxy Star Duos GT-5282?
Can i use this to my Galaxy Star Duos GT-5282?
Ill try ONECLICKROOT,SUPERONECLICK , But i got stuck it is not responding
jpnazar08 said:
Can i use this to my Galaxy Star Duos GT-5282?
Ill try ONECLICKROOT,SUPERONECLICK , But i got stuck it is not responding
Click to expand...
Click to collapse
Yes u can try framaroot to root it but dont try this recovery it can be risky as its not for ur device..
Sent on my GT-S6312 via xda premium
jpnazar08 said:
Can i use this to my Galaxy Star Duos GT-5282?
Ill try ONECLICKROOT,SUPERONECLICK , But i got stuck it is not responding
Click to expand...
Click to collapse
PM me,
I will try to root your device..
CM 10 ? Anyone ? Even if its in beta stage I'm ready to test. Just pm me
Is there a thread for custom roms/mods?
Is 4.2.2 available anywhere?
H0wdy said:
Is there a thread for custom roms/mods?
Is 4.2.2 available anywhere?
Click to expand...
Click to collapse
4.2.2 is not yet available buddy. We will have to wait
androsamace said:
PM me,
I will try to root your device..
Click to expand...
Click to collapse
okay im going to pm you
"Gandalf" doesn't work
androsamace said:
2. Install "Farmaroot.apk" (Thanks to alephzain)
> Open Farmaroot application & Select "Install Superuser"
> Select "Gandalf"
> Done with Success !!!!
Click to expand...
Click to collapse
Hi Androsamace,
The "Gandalf"-Step doesnt work for me.
I got following error:
Exploit result
Failed ... Try antoher exploit if available.
I tryed the Aragond method and the "Install SuperSU" method.
Nothing worked.
Could you help me here please?
Thanks.
Captn
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer:
By flashing this recovery you take full responsibility to whatever happens on your device. The developer will NOT be held responsible to whatever happens on your device. Ofcourse, the recovery has been tested but whatever happens on your device will not be held against the developer.
What Is CWM Recovery ?
CWM recovery is a way that enables you to falsh a custom rom , customize your rom and can save you from bad situations. To Be fully in controll of your android device you need a recovery and this is one of them.How To Install CWM Recovery ?
There are 2 methods for installing CWM
1.Method (dd method)
You need root before you continue.
now copy recovery.img from second post to your sd card and :
1.On PC :
Make shure that device is on usb debugging mode.
Plug device and open Terminal/command prompt.
Copy Pasta the Following Commands :
PHP:
adb shell
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p10
make shure that partion is mmcblk0p10 or you will brick device !
now you can reboot to recovery (volume up + home +power) and enjoy CWM 6.0.X.X
2.On Phone :
First Download Terminal Emulator From Play Store.
Plug device and open Terminal apk
Right the Following Commands :
PHP:
su (you need root acess for it )
Then
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p10
make shure that partion is mmcblk0p10 or you will brick device !(guys with fat fingers stay away !)
now you can reboot to recovery (volume up + home +power) and enjoy CWM 6.0.X.X
Second Method Is Via ODIN.
First Download ODIN
Now Download the GT-I9500-CWM-6.0.X.X.tar From Second Post and put it in same directory as odin.
Go To Download Mod (Volume Down +Home+Power) and plug device.
Now in Odin You Will see {added} and a light blue figure on top that means that device has been recognized if you dont get them uninstall devices drivers and retry.
Now click PDA and select GT-I9500-CWM-6.0.X.X.tar And Then Click Start .
After Device reboots Your Done and CWM Is Flashed.
Third method is flashing via recovery .
It does not matter if you are on stock recovery or custom recovery .
First of all download from second post GT-I9500-CWM-6.0.X.X.zip .
Then put it on sdcard .
Then Flash it .
Enjoy your new recovery.Thanks To :
CM Team For CWM recovery .
@Dees_Troy @bigbiff @anders3408 @cybojenix {These Guys Are The Best And I Thank Them for helping me every step in the way and nut thinking that i am a nut job }
Please Hit The Thanks Button If You Like My Work
Follow Me On Twitter SamerDKingCobra
If You Have Any Kind Of Trouble Feel Free To PM Me As I Am Here Almost 19 Hours A Day.
Downloads :
1.GT-I9500-CWM-6.0.4.6.img {For dd Method , Please rename to recovery.img }
2.GT-I9500-CWM-6.0.4.6.tar Build #1 {For Odin}
1.GT-I9500-CWM-6.0.4.5.img {For dd Method , Please rename to recovery.img }
2.GT-I9500-CWM-6.0.4.5.tar Build #1 {For Odin}
3.GT-I9500-CWM-6.0.4.5.zip [For Third Method]
1.GT-I9500-CWM-6.0.4.4.img {For dd Method , Please rename to recovery.img }
2.GT-I9500-CWM-6.0.4.4.tar Build #1 {For Odin}
3.GT-I9500-CWM-6.0.4.4.zip {For third method}
Change Log :
Build #1 Fully Working.Whats To Do In Future Build ?
Enable Touch .
Add OTG Support.FAQ:{Please Read Before Posting}
Q: OMG ! Recovey Not Booting What To Do ?
Alease Dont try entering recovery first time from advanced power menu just do it the hard way
Q:My Device is not getting read by windows ?
A:Uninstall all drivers that you installed for the device .Please Hit The Thanks Button If You Like My Work
Follow Me On Twitter SamerDKingCobra
If You Have Any Kind Of Trouble Feel Free To PM Me As I Am Here Almost 19 Hours A Day.
For later use
Attachment.??
Disturbed™ said:
Attachment.??
Click to expand...
Click to collapse
Second post , sorry i took me long enough because of my bad internet
S.a.M.e.R_d said:
Second post , sorry i took me long enough because of my bad internet
Click to expand...
Click to collapse
Thanks buddy. can you please tell one thing.? what is the speed of taking /restoring backup.? like how much time does it take to take backup.? in TWRP V it hardly take 3-5 min for 2.5GB data.
Disturbed™ said:
Thanks buddy. can you please tell one thing.? what is the speed of taking /restoring backup.? like how much time does it take to take backup.? in TWRP V it hardly take 3-5 min for 2.5GB data.
Click to expand...
Click to collapse
after a precision timing it took me 7. 43 minutes for 5.23 gb of data
Works well, thanks.
will this work on leak 4.3 tq
kishen80 said:
will this work on leak 4.3 tq
Click to expand...
Click to collapse
Yes probably , as i compiled CWM with android 4.3.1 source
Sent from my GT-I9500 using XDA Premium 4 mobile app
kishen80 said:
will this work on leak 4.3 tq
Click to expand...
Click to collapse
After doing wipe data/factpry reset on latest philz touch recovery the phone wont go past the samsung logo..
Something like that wont happen with tbis right?
Sent from my GT-I9500 using xda app-developers app
Degrated Shadow said:
After doing wipe data/factpry reset on latest philz touch recovery the phone wont go past the samsung logo..
Something like that wont happen with tbis right?
Sent from my GT-I9500 using xda app-developers app
Click to expand...
Click to collapse
no its working :good::good::good:
kishen80 said:
no its working :good::good::good:
Click to expand...
Click to collapse
yes i can confirm. i just did a backup and restore. its freaking good. i am sticking to this recovery.
subscribing now.
Hi,
Please make ZIP version to istall from other recovery
Thanks
Do we have a CWM flashable package?
i made a zip but it will not work from first flashh dunno why , i will try and report back.
mateen5997 said:
Hi,
Please make ZIP version to istall from other recovery
Thanks
Click to expand...
Click to collapse
rl421403 said:
Do we have a CWM flashable package?
Click to expand...
Click to collapse
Done Check Second Post.
S.a.M.e.R_d said:
Done Check Second Post.
Click to expand...
Click to collapse
Thanks. Just grabbed.
Sent from my Galaxy S4
S.a.M.e.R_d said:
Done Check Second Post.
Click to expand...
Click to collapse
Thanks
Hi Samered, cwm file zip is corrupted, please make another one, thanks
Sent from my GT-I9500 using XDA Premium 4 mobile app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello guys.. In this thread, i will share tutorial about How To Install ClockWorkMod Recovery for Samsung Galaxy Fame GT-S6810. So, let's check this out...
Things Required :
Galaxy Fame that already rooted
Terminal Emulator (u can download it from playstore)
CWM File. Put it on /sdcard. (not extSdcard)
Steps :
Make sure ur galaxy fame already rooted
Open Terminal Emulator and type this :
Code:
$ su
# dd if=/dev/block/mmcblk0p6 of=/sdcard/bak_recovery.img
# dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p6
dd if=/dev/block/mmcblk0p6 of=/sdcard/bak_recovery.img is for backup up stock recovery
CWM is installed. To check it, type "reboot recovery" to go to cwm. (without quotes)
Screenshot :
Click to expand...
Click to collapse
bug :
- error restore /data
Thanks to : Allah SWT
Credits :
Baca Yang Bener
Awan Syabani (for tester )
thanks , it worked for me
BUG.
Is there any type of bug present on this recovery ???????????????
can i use this recovery on my Galaxy Fame Gt-S6812 (Duos)
Vkas Raj said:
Is there any type of bug present on this recovery ???????????????
can i use this recovery on my Galaxy Fame Gt-S6812 (Duos)
Click to expand...
Click to collapse
i dont know bro. is fame duos already has cwm ? cz fame with fame duos is different.
davexd97 said:
thanks , it worked for me
Click to expand...
Click to collapse
u r welcome
yes there is a recovery present for both 6810 & 6812 but it has some bugs >>>>>>>>>>>>
Thread: http://forum.xda-developers.com/showthread.php?t=2495467
will this recovery installed permanently or temporary ??????????????
will you be uploading some more stuff for this phone ???????
Thankyou !!!!!!!!!!
Vkas Raj said:
yes there is a recovery present for both 6810 & 6812 but it has some bugs >>>>>>>>>>>>
Thread: http://forum.xda-developers.com/showthread.php?t=2495467
will this recovery installed permanently or temporary ??????????????
will you be uploading some more stuff for this phone ???????
Thankyou !!!!!!!!!!
Click to expand...
Click to collapse
hmm... Would you be a tester for my cwm installer app ? if yes, i'll send u pm.
cleverior.ipul said:
hmm... Would you be a tester for my cwm installer app ? if yes, i'll send u pm.
Click to expand...
Click to collapse
Yes ,,,,
Happily , i will be your CWM tester !!!!!
Q. will your installer flash recovery permannetly or temporary?
I Will Support Anything which is Developing For this PHONE.................
Vkas Raj said:
Yes ,,,,
Happily , i will be your CWM tester !!!!!
Q. will your installer flash recovery permannetly or temporary?
Click to expand...
Click to collapse
It`s permanent CWM.. I`ll attach an odin package for this recovery to make it easier.
Just unzip it and put it on the pda tab in Odin 3.07 and flash it.
As i said here i'm working on a rom.. For now i managed to deodex all apps and frameworks and remove some of the bloatware.. And it`s fully working.. I`ll mod it in a few days and upload it.
Meanwhile, as a homework, gather around to open a thread for this device
Cheers!!
Vkas Raj said:
Yes ,,,,
Happily , i will be your CWM tester !!!!!
Q. will your installer flash recovery permannetly or temporary?
I Will Support Anything which is Developing For this PHONE.................
Click to expand...
Click to collapse
have u root ur fame ?
its cwm permanent.
corsicanu said:
It`s permanent CWM.. I`ll attach an odin package for this recovery to make it easier.
Just unzip it and put it on the pda tab in Odin 3.07 and flash it.
As i said here i'm working on a rom.. For now i managed to deodex all apps and frameworks and remove some of the bloatware.. And it`s fully working.. I`ll mod it in a few days and upload it.
Meanwhile, as a homework, gather around to open a thread for this device
Cheers!!
Click to expand...
Click to collapse
Root is required for ODIN flashing or not ?
will it work for Galaxy Fame 6812.............
or any type of bug on this CWM...
no need for root to flash cwm with odin.. recovery works on all 3 devices (10/10p/12).. as bugs i found only not mounting usb storage.. will test more today..
Sent from my GT-I9100 using Tapatalk
corsicanu said:
no need for root to flash cwm with odin.. recovery works on all 3 devices (10/10p/12).. as bugs i found only not mounting usb storage.. will test more today..
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
will this recovery makes .tar backups ???????????
Vkas Raj said:
will this recovery makes .tar backups ???????????
Click to expand...
Click to collapse
yes. but maybe u'll get error when restore /data
When I try to wipe dalvik cache an error appears but not really interrupts the process.
"E:unknown volume for path [/sd-ext]"
ryanperez said:
When I try to wipe dalvik cache an error appears but not really interrupts the process.
"E:unknown volume for path [/sd-ext]"
Click to expand...
Click to collapse
that is because cwm search for dalvik on external sd and maybe you don't have one or cwm doesn't mount it.. the process is still wiping internal dalvik so that's the reason for not interrupting.. it's a normal thing :good:
corsicanu said:
that is because cwm search for dalvik on external sd and maybe you don't have one or cwm doesn't mount it.. the process is still wiping internal dalvik so that's the reason for not interrupting.. it's a normal thing :good:
Click to expand...
Click to collapse
Oh. thanks for the information. and by the way. How is it going on the rom? sorry for the bad english.
As i promised!:good:
http://forum.xda-developers.com/showthread.php?t=2582851
cleverior.ipul said:
[*]Make sure ur galaxy fame already rooted
[*]Open Terminal Emulator and type this :
Code:
$ su
# dd if=/dev/block/mmcblk0p6 of=/sdcard/bak_recovery.img
# dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p6
dd if=/dev/block/mmcblk0p6 of=/sdcard/bak_recovery.img is for backup up stock recovery
[*]CWM is installed. To check it, type "reboot recovery" to go to cwm. (without quotes)
Click to expand...
Click to collapse
Ran this command from terminal emulator and when I tried to boot it into recovery, the phone went dead. There is no signs of any activity and I pulled the battery out and when I press the power button, there is no response from the phone.
It's a brand new phone and it's dead already. Sigh!
Any ideas how to recover it? Thanks in advance for any and all replies.
RainGater said:
Ran this command from terminal emulator and when I tried to boot it into recovery, the phone went dead. There is no signs of any activity and I pulled the battery out and when I press the power button, there is no response from the phone.
It's a brand new phone and it's dead already. Sigh!
Any ideas how to recover it? Thanks in advance for any and all replies.
Click to expand...
Click to collapse
what ? have u copy recovery.img galfame to sdcard ?
try to flash stockrom using odin.
Hello firends,
1 - ¿Was there a problem when trying this on GT-S6810 Galaxy Fame?
2 - ¿Does not this active counter flashing right?
3 - ¿Is functional recovery system with this CWM?
Greetings,
Diego
Translated by: Google Translator
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In this thread, i would like to share tutorial about How to install CWM Recovery and rooting Samsung Galaxy V SM-G313HZ. But you can also use TWRP Recovery if you do not like CWM and then rooting by following this guide.
Requirement :
PC/Laptop/Netbook.
Odin3 v3.09.
CWM_Vivalto_v6.0.3.7_Build#3_(ODIN_VERSION).zip.
UPDATE-SuperSU-v1.94.
USB Cable.
Brain.
Click to expand...
Click to collapse
Installing CWM :
Extract odin and CWM_Vivalto_v6.0.3.7_Build#3_(ODIN_VERSION).zip in the same folder
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until detected on Odi
Add the recovery.tar.md5 file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
Wait until the flashing process is complete
Click to expand...
Click to collapse
Rooting :
Copy UPDATE-SuperSU-v1.94.zip to External SD.
Go to CWM.
Install zip -> from sdcard.
Choose UPDATE-SuperSU-v1.94.zip and wait untill finished.
Reboot system now.
If there is notif "fix supersu blablabla" just press "back" button.
Click to expand...
Click to collapse
Screenshot :
Changelo CWM build #3
- Change the HOME BUTTON as selector menu
Bug :
can not install zip, backup/restore from/to internal sd.
Old version
Special thanks to Allah SWT.
Credits :
Cleverior
Riskey95
CyanogenMod
And you
are this tutorial really work. i want to try it but i dont know how to unbrick this device when the tutorial doesnt work out.
Lemon_Lime`s said:
are this tutorial really work. i want to try it but i dont know how to unbrick this device when the tutorial doesnt work out.
Click to expand...
Click to collapse
forry for the late reply..
ofcourse this tutorial is really works. look at the screenshot.
What are the changes in build 2? Backup/restore working fine?
cleverior.ipul said:
forry for the late reply..
ofcourse this tutorial is really works. look at the screenshot.
Click to expand...
Click to collapse
thanks for reply .. i will try this out ..
adriansticoid said:
What are the changes in build 2? Backup/restore working fine?
Click to expand...
Click to collapse
fix resolution of CWM. Backup/restore also working fine. I've tested.
Some of the things I noticed:
1. Home button is functioning the same as volume buttons. I think it should function like the power button to select items.
2. White screen when entering recovery.
3. At the bottom it says warning about context files?
4. When rebooting it says root possibly lost. I think it should be rebooted once reboot system is selected.
Maybe it's just me because I got used to CWM in Galaxy Y. Anyway, huge thanks to you. I hope to see more for this device like custom ROMs, kernels, etc. Goodluck.
adriansticoid said:
Some of the things I noticed:
1. Home button is functioning the same as volume buttons. I think it should function like the power button to select items.
2. White screen when entering recovery.
3. At the bottom it says warning about context files?
4. When rebooting it says root possibly lost. I think it should be rebooted once reboot system is selected.
Maybe it's just me because I got used to CWM in Galaxy Y. Anyway, huge thanks to you. I hope to see more for this device like custom ROMs, kernels, etc. Goodluck.
Click to expand...
Click to collapse
1. Maybe will be fixed on the build.
2. I think that isn't big problem.
3. And this is also not big problem.
4. Maybe will be fixed on the build.
Galaxy Y Gen 1 or 2 ?
cleverior.ipul said:
1. Maybe will be fixed on the build.
2. I think that isn't big problem.
3. And this is also not big problem.
4. Maybe will be fixed on the build.
Galaxy Y Gen 1 or 2 ?
Click to expand...
Click to collapse
It's GT-S5360 so I think it's gen 1. It is now sold and I bought a Galaxy V. The CWM in Galaxy Y is almost the same as Galaxy Pocket. I hope there are other devs who also have this device.
This actually works! Too bad it can't be used with Internal Storage...
But using wih sdcard and CWM magically works like charm.. Can mount everything.. Great job dev!
adriansticoid said:
It's GT-S5360 so I think it's gen 1. It is now sold and I bought a Galaxy V. The CWM in Galaxy Y is almost the same as Galaxy Pocket. I hope there are other devs who also have this device.
Click to expand...
Click to collapse
Android version of galaxy y gen 1 is different than galaxy v. Version of recovery also different.
Little Zed said:
This actually works! Too bad it can't be used with Internal Storage...
But using wih sdcard and CWM magically works like charm.. Can mount everything.. Great job dev!
Click to expand...
Click to collapse
good to hear that. please hit the thanks button
OLD Version
CWM 6.0.3.7 Build #2
Changelog :
Fix resolution CWM
Link :
CWM_Recovery_build2.zip (odin version)
[URL="http://www.mediafire.com/download/uh7u9tnh6hc8hre/zz_CWM_Vivalto_Build#2.zip"]zz_CWM_Vivalto_Build#2 (flashable version)[/URL]
CWM 6.0.3.7 Build #1
Changelog :
First build
Link :
CWM_Recovery_v6.0.3.7_Vivalto.zip
cwm updated
Can I flash the build3 using Flashify or Rashr? Or can you make the update flashable? Sorry for the request. I don't have PC. And for some physical problems, I can't go to a computer shop. Thanks.
adriansticoid said:
Can I flash the build3 using Flashify or Rashr? Or can you make the update flashable? Sorry for the request. I don't have PC. And for some physical problems, I can't go to a computer shop. Thanks.
Click to expand...
Click to collapse
here bro
This method worked perfectly to root my Samsung Galaxy Ace 4 Lte (SM-G313ML)
Thanks for sharing it!
garyo said:
This method worked perfectly to root my Samsung Galaxy Ace 4 Lte (SM-G313ML)
Thanks for sharing it!
Click to expand...
Click to collapse
u're welcome. glad to hear that. and dont forget to read my signature.. hehehe
i do as your guide.but my phone can't flash zip supersu v1.4.help me please.my phone is sm-g313hz
---------- Post added at 07:23 AM ---------- Previous post was at 07:12 AM ----------
https://lh5.googleusercontent.com/-.../EGSoSIEbIAk/w769-h577-no/20150221_071533.jpg
https://lh4.googleusercontent.com/-.../B6WUa4XlPu4/w433-h577-no/20150221_071422.jpg
https://lh4.googleusercontent.com/-.../DuQBg0dWOTg/w769-h577-no/20150221_071525.jpg
danbin said:
i do as your guide.but my phone can't flash zip supersu v1.4.help me please.my phone is sm-g313hz
---------- Post added at 07:23 AM ---------- Previous post was at 07:12 AM ----------
https://lh5.googleusercontent.com/-.../EGSoSIEbIAk/w769-h577-no/20150221_071533.jpg
https://lh4.googleusercontent.com/-.../B6WUa4XlPu4/w433-h577-no/20150221_071422.jpg
https://lh4.googleusercontent.com/-.../DuQBg0dWOTg/w769-h577-no/20150221_071525.jpg
Click to expand...
Click to collapse
that is stock recovery. not CWM. try to reflash ur phone to stockrom thru odin and reflash cwm/twrp.
can you send link to me CWM/twrp?because i do as your guide.but it can't flash.thanks
Hey Guys,
Many People are confused how to install CM 12.1 (lollipop) ROM on our device.
So, here's a brief Guide.
Part 1: Installing Recovery
1. Download TWRP Recovery From the Link: https://www.androidfilehost.com/?fid=24407100847293110
2. Download ODIN From this link. http://odindownload.com/download/Odin3_v3.10.7.zip
3. Install Samsung USB Drivers. http://androidhost.org/XIVsA
4. Extract Odin and run odin.exe on your pc.
5. Shut Down your Phone and Press Volume down + power button + home button simultaneously.
6. Press Continue.
7. Open Odin on your pc and select AP and browse to the recovery file you downloaded.
8. It shows port no in ID:COM section. Dont touch any other thing and press start.
9. Now, Your Phone will automatically rebooted.
Part 2 : Installing ROM
10. Download these stuff and copy them to ur microsd card.
CM 12.1 - 6 March Update - https://www.androidfilehost.com/?fid=24438995911971793
GAPPS (For Play Store) - https://www.androidfilehost.com/?w=files&flid=31528
11. Shut Down your Phone and press Volume Up + Power + Home at same time.
12. TWRP Recovery will now open.
Note:When entering TWRP Recovery, it will ask you if you want to keep system partition Read only, check the box "Never show this screen during boot again" and swipe the lock bar, else you can't modify system partition in TWRP like install ROM, root...
13. Select Wipe and wipe cache, dalvik cache, system, internal storage,data.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
14. Select Install and select the rom file and install it. (it may take some time)
15. Now Select Install again and select gapps zip and reboot system and you are all done.
Hit Thanks if this is useful for you.
Leave your FeedBack
use same procedure for flashing cm11 as well but obviously download cm11 rom and gapps for android 4.4.4
Thank you
i got a propleme.. TWRP doesn't open at all .. like it's not even intalled.. can you help please ?
did it get completed on odin? Try changing usb cable and usb port
Will it work with cwm
And also is it necessary to download (gapps)
Does it have to be stock frimware so the rom could be installed?
Thank's DEV @SandPox for this nice ROM and for the effort to do for all bugs.
__________ OFFICCIAL _________
http://forum.cyanogenmod.org/topic/...galaxy-trend-plus-s-duos-2-gt-s7580-gt-s7582/
please help
I have s duos 2 -7580 with cm 11 i am currently using. whwn i flash cm 12.1 with twrp it shown E:\Unable to mount System.Please give me solution of this problem...asap
How to fix deadlock or headset problem...
Experimental kernel
https://www.androidfilehost.com/?fid=24269982087004359
Code:
Note for who don't know how to upgrade kernel:
This zip file are not supposed to be flash in recovery
extract it 1 time, you'll get modules/ and kernel.tar
kernel.tar flash by odin or extract it to get boot.img and flash it by any method you want
modules/* copy to /system/lib/modules/, old file must be delete and copy new file to there (remember to backup old modules)
this kernel are supposed to not have any deadlock or headset problem, report to me if anything gone wrong
remember to backup your old kernel
know problem: incall make phone crash, will fix later
damn.. i forgot to fix RIL for s7582, RIL will not work for s7582
surprise: I just know how to fix dialer lag, our phone kernel set the limit to 60fps maximum frame rate, I tried to increase it to 70fps and dialer lag is gone xD
Credits:
Sandpox
Its not installing . I tried it . Showing an error but gaaps is working.
rahulhanda20 said:
Will it work with cwm
And also is it necessary to download (gapps)
Click to expand...
Click to collapse
Try CWM..
Gapps is for play store and framework
munthir said:
Does it have to be stock frimware so the rom could be installed?
Click to expand...
Click to collapse
Not necessary but recomended
alay shah said:
I have s duos 2 -7580 with cm 11 i am currently using. whwn i flash cm 12.1 with twrp it shown E:\Unable to mount System.Please give me solution of this problem...asap
Click to expand...
Click to collapse
i think u have selected read only whenu opened twrp first time...
Install TWRP again and uncheck read only check on dont ask again and continue...and it will work
Light Hope said:
Its not installing . I tried it . Showing an error but gaaps is working.
Click to expand...
Click to collapse
What Error u got
Mohned said:
i got a propleme.. TWRP doesn't open at all .. like it's not even intalled.. can you help please ?
Click to expand...
Click to collapse
Even I also faced the same situation... I flashed twrp but it's directly going into android recovery not to twrp recovery...But i got a solution from Xda-developers... I used odin to flash twrp into my mobile while doing i unchecked the auto reboot option in odin. after flashing its working.......:good:
tried that solution but still it shows same error... e unable to mount system
For this do we need to be on CM 11 ????
Light Hope said:
For this do we need to be on CM 11 ????
Click to expand...
Click to collapse
It doesnt matter whether u are on cm11 or stock unless u wipe everything (except external sd) before install
abbi339 said:
Even I also faced the same situation... I flashed twrp but it's directly going into android recovery not to twrp recovery...But i got a solution from Xda-developers... I used odin to flash twrp into my mobile while doing i unchecked the auto reboot option in odin. after flashing its working.......:good:
Click to expand...
Click to collapse
Thanks alot for replying me^^ .. i'll try this and tell you the results later ..oh and sorry for my bad English
Wow!
It works, no problem.
Can u please tell me how could I root now?
Last time I use I-root but, now its not working.
Give me a instruction please.
IM NOT RESPONSIBLE IF YOU BRICK YOUR TAB OR DECIDE TO BE CARELESS OR CREATE A CYCLONE... you know the drill.
HOW TO ROOT SM-T116 TAB 3 LITE 7.0 3G VOYAGE-XX ( Galaxy Tab 3 Lite VE (3G) (SM-T116 ))
After searching for over a month on how to root/install twrp all i cound find were instructions for the SM-T110/1...
if thread already exists pls notify
N.B I TAKE NO CREDIT FOR THIS RECOVERY IN ANYWAY
I am writting to help fellow SM-T116 owners... Since ive been searching for a long time.... I believe there isnt a guide to root this Tab yet.
- N.B MAKE SURE you device's code name is goyave or goyave3g
1. Download the twrp recovery here
- download the recovery in .tar format...
- you will upgrade to v3 manually.
2. Download Odin v3.10.* here
-> copy them to a place you know on ur pc such as Desktop
3. Boot your Tab 3 lite to download mode by: pressing "power + home + vol down"
-> believing all your drivers are installed correctly
3.1 open Odin*.exe ,
3.2 connect your tab and press volume up...
-> at this stage Odin should recognise your device
on the ID:COM section like
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. UNTICK AUTO REBOOT or you wont be able to enter recovery
5. Tap pn AP and go to the recovery you downloaded.
select it
6. Press on Start to begin the flashing process
-> After Odin flashes the recovery it will tell you PASS!
7
7.1. Preas and hold POWER + VOLUME DOWN
7.2. when the screen goes black change and hold HOME + VOLUME UP
Now you will enter TWRP... stage 1 done.
rooting on post #2:good:
Now TWRP is functional... Time to root.
1. Download Chainfire's SuperSu flashable zip here
-> and thanking is not a crime.
2. Reboot to recovery...
ALLOW TWRP TO MODIFY THE SYSTEM PARTITION
3.1. Select install
3.2. navigate to your supersu zip
/sdcard/* or /extsdcard/*
-> when you are at the folder where your zip is it will be on the dialog on the right.
4.1. select it
4.2. swipe to confirm
4.3. select wipe cache/dalvik and reboot...
Now you have a Custom Recovery and you are rooted... Doors open.
Becarefull to not to open the wrong doors
THE PEOPLE WHO MADE THIS POSSIBLE
CREDIT GOES TO:
BIG THANKS TO TeamWin - TWRP FOR THE AWESOME RECOVERY AND
CHAINFIRE for the awesome supersu
SAMSUNG FOR Odin and Demostration Image
THATS IT...!!!!!!!!!!!!!!!!!!!!!!!!!!
will upload deodexed and zipalign rom soon.
Very nice !
:laugh::laugh::laugh:
This works for 116NY too xD
hello I cannot get this to work on my SM-t116 I must be doing something wrong
Can you please give a more detailed process on the procedure?
I am new with Android. Please, can you describe step by step process
peter6206 said:
hello I cannot get this to work on my SM-t116 I must be doing something wrong
Can you please give a more detailed process on the procedure?
Click to expand...
Click to collapse
Which part fails bro cause a more detailed procedure is a video right
diana-TF said:
I am new with Android. Please, can you describe step by step process
Click to expand...
Click to collapse
Ill add numbering then...
I wrote every step 1 by 1.
U r probably comfused cause there aren't any numbering as to what to do first.
hi...Replies to Android 4.4.4؟؟؟؟؟
h.azara said:
hi...Replies to Android 4.4.4؟؟؟؟؟
Click to expand...
Click to collapse
Whatsup
Can you please post a link for custom rom
Ponie123 said:
Can you please post a link for custom rom
Click to expand...
Click to collapse
Custom Rom like??
nhlalukoG said:
Custom Rom like??
Click to expand...
Click to collapse
Like CYANOGEN or Pac man
Lol they r built bro...
N i guess no one has built it...
peter6206 said:
hello I cannot get this to work on my SM-t116 I must be doing something wrong
Can you please give a more detailed process on the procedure?
Click to expand...
Click to collapse
i will help you,
1: install kingoroot on your pc
2:Enable USB debugging
3:connect your phone to pc wait for processing
4:when 99% your phone automatically restarted, do not put off the usb cable when it complete
5:hope your phone will b e rooted
I have this tab as above, it is locked(programmed) using an administrative app named Cellwe EMM. Basically i cannot download anything on this tab with neither usb nor sdcard including the internet. All i have to do to get rid of this security is wipe using custom recovery. When i get the tab in download mode it has this MDM DOWNLOAD BLOCK which block me from flashing and installing custom recovery in this tab. My only hope is if i can create an update.zip for twrp or cwm to be installed in this tab using stock recovery. This is where i need help,can someone create this for me or help me with a guide to do this
Adebayo0437 said:
I have this tab as above, it is locked(programmed) using an administrative app named Cellwe EMM. Basically i cannot download anything on this tab with neither usb nor sdcard including the internet. All i have to do to get rid of this security is wipe using custom recovery. When i get the tab in download mode it has this MDM DOWNLOAD BLOCK which block me from flashing and installing custom recovery in this tab. My only hope is if i can create an update.zip for twrp or cwm to be installed in this tab using stock recovery. This is where i need help,can someone create this for me or help me with a guide to do this
Click to expand...
Click to collapse
Hahaha not possible... the update.zip need to be signed by Samsung specifically...
Unless you get a modified stock recovery which needs to be flashed via Odin...
Ok
Rushaan n said:
Ok
Click to expand...
Click to collapse
Does it have "oem unlock" on developer settings??
nhlalukoG said:
Does it have "oem unlock" on developer settings??
Click to expand...
Click to collapse
Deleted