Related
Hey guys,
I just wanted to give a short review of a case I'm using, because I absolutely love it. It's the Exact Armor Case.
I bought it a week and a half ago, at the time it was only $3.95, at the time of me writing this it is $7.95 on Amazon. It's VERY similar to the Ionic Guardian Armor Case. There was some concern because I believe that on Amazon this case in the pictures doesn't show a cut out on the back for the speaker, but it does indeed have one.
It feels really good in the hand. I wasn't sure how I was going to feel about the dots on the back, but they ended up not being bad, and really make it so the phone doesn't slide out of your hand/off a table when you are holding it/sitting it down. I also have an i-Blason TPU case and I liked it but wanted something with a little bit more protection. I love the rubbery cover on the buttons on the Exact case, it makes it incredibly easy to push those buttons, which were more difficult to push on the i-Blason case in my opinion.
It feels really good and sturdy in the hand, and I love the way it feels. It doesn't add any more then the i-Blason case does when you're holding it in my opinion, except for on the corners, but you don't really notice those when holding it. All of the ports (mini USB and headphones) are accessible, however when I tried to plug a headphone jack from my car in it was a little too big and didn't fit in the hole cut in the case, but using a pair of headphones fits just fine.
I'm usually rough on phones, and so I wanted to get a sturdy case until hopefully an Otterbox comes out, which I will then buy and see if I like it more then this case. I HAVE dropped my phone twice over the past 72 hours or so using the case, and there was no damage to the phone. Once was getting out of my car and the phone fell onto gravel, and the second was just when I was pulling it out of my pocket I dropped it. (Yes, I'm clumsy, and I need to try harder to keep it safe.) There is no damage at all to the phone.
The front of the case does slide over the front, so you can sit the phone screen down and it doesn't touch whatever is underneath it. There is a small lip there, but so far it hasn't deterred me in anyway touching the screen/typing/swyping.
Please feel free to ask any questions, I'll be more then happy to answer. And before anyone asks, I just put on a Xtremeguard Screen Protector on literally 5 minutes before I took the pictures, so if the screen looks weird that's why, as it has to dry out and such.
If anyone asks, I can also talk about the i-Blason case a little.
I can't post links to the cases above because I don't have 10 posts yet :/ Just search on Amazon, you'll find them all, and after I post 10 times I'll come back and add the links in.
Amazon link: http://www.amazon.com/Exact-Armor-Google-Nexus-Smart/dp/B00AAKM44K
I have this case also. For such a bargain I'm astounded by its quality. :good:
Who knows when an otterbox will come out, I think I will get this one until then
ccs1676 said:
Who knows when an otterbox will come out, I think I will get this one until then
Click to expand...
Click to collapse
Nobody knows for sure but like most of the stuff in production you can probably expect it will be released before the end of January.
I think chances are you will get this one and then decided (unless you some how destroy it) that you don't want to shell out for an Otterbox.
theTqM said:
I have this case also. For such a bargain I'm astounded by its quality. :good:
Click to expand...
Click to collapse
Thanks for posting the link! Gotta start posting more and stop lurking so much It's amazing quality, especially since I got it when it was only $4.
ccs1676 said:
Who knows when an otterbox will come out, I think I will get this one until then
Click to expand...
Click to collapse
It's terrific quality, and super cheap, and who knows, even if Otterbox comes out with one, I like this one an awful lot!
I would really like to get this case but the shipping to Canada kills the deal. $13 is more than the case itself. Anyone know if someplace else sells this case? EBay has nothing.
Sent from my Nexus 4 using Tapatalk 2
Ew.... *gags*
Sent from my Nexus 4
theTqM said:
Nobody knows for sure but like most of the stuff in production you can probably expect it will be released before the end of January.
Click to expand...
Click to collapse
Only there's no Otterbox case in production for the Nexus 4. Alas.
I got this case when it was $3.95 as well, great deal.
My TPU case was causing problems with my Skinomi screen protector but no problems with this case.
I currently have this case on... It sometimes lifts my xo skin screen protector so I have to push the screen protector down. For those who need even more protection there is a case on ebay called the Rugged Hybrid case, for 10-12 buck. The case is a beast but I'm waiting for someone to review on it before I purchase one.
Sent from my Nexus 4 using xda app-developers app
Sparta507 said:
I currently have this case on... It sometimes lifts my xo skin screen protector so I have to push the screen protector down. For those who need even more protection there is a case on ebay called the Rugged Hybrid case, for 10-12 buck. The case is a beast but I'm waiting for someone to review on it before I purchase one.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Is the lift because of the slight inward flex around the edges that one gets when gripping the phone? or is it always in contact with the XO?
theTqM said:
Is the lift because of the slight inward flex around the edges that one gets when gripping the phone? or is it always in contact with the XO?
Click to expand...
Click to collapse
It's because of the inward flex around the edges when I grip it. It does seem like the case is always in contact with it, but doesn't pull up the protector unless I grip it tight or push on it.
Sent from my Nexus 4 using xda premium
Just received my case earlier today and I have to say it may be my favorite. I own the iBlason in black, Diztronic TPU in black as well as the Cruzerlite Androidified in white. The price vs. protection offered is astounding. I have to say it is very much comparable to my parents Ballistic Shell Gel Series case they both have on their Galaxy S III. The material isn't quite as "nice" as the Ballistic but for a $7 case, comparing it to a $30 from Ballistic or $15 on Amazon, it is certainly a no brainer.
Nexus 4 Ballistic Case (yet to be released):http://www.goballisticcase.com/products/lg-nexus-4-ballistic-shell-gel-sg-series-case
Anyone want to comment on whether the case grips your pocket? That's the only thing holding me back from pulling the trigger on this over the diztronic you case.
masterchung89 said:
Anyone want to comment on whether the case grips your pocket? That's the only thing holding me back from pulling the trigger on this over the diztronic you case.
Click to expand...
Click to collapse
Mine is fairly easy to pull out of my pocket. I don't wear super tight pants, but if I did it might be a problem. The rubbery part on the case is a lint magnet when you put it in your pocket but it isn't bad putting in or pulling out.
Sent from my Nexus 4 using xda premium
tmhiott said:
Mine is fairly easy to pull out of my pocket. I don't wear super tight pants, but if I did it might be a problem. The rubbery part on the case is a lint magnet when you put it in your pocket but it isn't bad putting in or pulling out.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
I can wholly say the same.
Ordered. Guess I'll soon find out :fingers-crossed:
I have this too. I like it so far
Sent from my Nexus 4 using xda app-developers app
Hey guys,
I got the chance to review this case and made the video as usual. It is very thin, very light, however I am not comfortable leaving the top and bottom exposed.
Here it is! If you have any questions please just let me know
http://youtu.be/KIRwjBtI7L4
Just slapped mine on, like the raised corners for face down safety but agree the front of the top and bottom are pretty exposed. Nice fit and what I was looking for though. Nice review
Sent from my Nexus 4 using Tapatalk 2
whiel i like how slim it is. on mine, even with it face down, it'll wobble and it seems the screen is still touching because it slides soo easily like it does without the case.
the case without the phone doesn't wobble and it doesn't slide easily. maybe i have crooked one? doesn't feel like it though since there's no squeaking with the case on.
Just got mine and I'm liking it a lot, all we need is a case exactly like this one but covers the top and bottom as well, but yea this one is very nice
Sent from my Nexus 7 using Tapatalk 2
Odd I put mine face down in the dark and can see light all the way around except the corners. I am fairly positive it's not touching screen. The second case I got isn't as good of a fit though it is loose on the volume rocker side.
Sent from my Nexus 4 using Tapatalk 2
I've had mine for a week or so.
Pros:
Thin
Light
Cons:
Moves around too much directly over the volume controls. Not enough material there to be stiff enough so it tends to flex in that area.
There's an annoying ridge around the edge closest to the screen. Sort of like a line for the mold used to form the plastic. This makes it feel cheap.
I've got the "Ringke Fusion" case on order and hoping I like that better. If so, this one may be going back.
-Brett.
I was just wondering...to address the 'top and bottom bezel uncovered' issue, could we not apply one of those full body shield protectors, i.e those that protect the sides? Or would the case not fit with that on?
esskayy said:
I was just wondering...to address the 'top and bottom bezel uncovered' issue, could we not apply one of those full body shield protectors, i.e those that protect the sides? Or would the case not fit with that on?
Click to expand...
Click to collapse
That'll protect from scratches but not from impact
Sent from my Nexus 4 using xda premium
I have this case and love it. I don't like to put cases on my phones but wanted to protect the glasses back so I got this. Protects the back while barely being noticeable, which is perfect for my tastes.
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
Got this case a couple days ago in white. So far so good. Thin and low profile. Dropped the phone yesterday, hit the corner and not a scratch or crack on the phone.
To those who have this case on, is it a snug fit or kind of lose? I'm asking because I just received the Spigen SGP Slim and it has a lose fit. Like you could shake it softly and feel the phone sliding around..kind of disappointed and if the Ringke Slim is snug, then I'm considering ordering that.
Sent from my Nexus 4 using xda app-developers app
Mine is fit, and I actually have hard time taking it off the phone.
Sent from my Nexus 7 using Tapatalk HD
cisland said:
Mine is fit, and I actually have hard time taking it off the phone.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
Man..I knew I should of ordered from Rearth instead since I had the slim case for the Gnex...thanks for the response. Haha
Sent from my Nexus 4 using xda app-developers app
probably the tightest snuggiest case. IT's a b*tch to take off. Can nick the phone w/my fingernail trying to remove the case hence why I've been rocking it naked the past week..
Correct fitment is pretty tight . but I think this also makes it barely noticeable
Sent from my Nexus 4 using xda premium
Thanks for the responses...went ahead and ordered me one. That spigen ones crappy IMHO..good thing I have a buddy that's gonna take it off my hands for the amount I got it for
Sent from my Nexus 4 using xda app-developers app
waiting for mine
Sent from my Nexus 4 using xda app-developers app
Best case I've ever owned. And I hate cases.
Sent from my Nexus 4 using xda app-developers app
I got my navy blue Ringke Slim (version 2) this morning and although the fit is superb and getting it back off if a challenge i am a little cheesed off that "soft touch" doesn't equate to grip like it would on a Case Mate Barely There.
Great case but i am tempted to put my 95p S Line jobbie back on.
Cheapo case back on and the Ringke Slim sold on, it needs to be more grippy.
First, the case's full name is Acase Superleggera Pro Hybrid dual layer Case for LG Google Nexus 4.
Link on amazon.com: http://www.amazon.com/gp/product/B00B4I2GJU/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
FOr me, the seller shipped from IN, I dont know if they have any other branch. IAmazon said it would be delivered on Thursday, but I have received it on Wednesday.
I am not good at English, so I will use a lot of images to review this case.:laugh: I also take picture the case with the Nexus 4 adapter, so you can compare the demensions.
The case fit perfectly to the phone.
The case has two layers which are seperated. One is soft and one is hard.
I have a back, front and body wet-protector, and this case haven't peel my protector yet. Hopefully it won't. However, with a soft cover, I dont think it will peel any corner off.
THe back of the hard part is smooth. Hence slippery or not, I think it depends on each person. For me, it's not slippery. But the fact is it's smooth, so it can fall off your hand if you're not careful.
Buttons can be used very easily.
I dont have a Wifi charger in case someone ask me for this.
Last thing, any grammar error?
EDIT and WARNING: Because this case has a ruber layer (it has two layers: the soft ruber one and the hard one), it collects dust very easy, especially when you put it in your jeans' pocket. This is no problem to me, with a fiber or tape, I can easily remove them.
I also confirm again, this case doesn't peel the corner of your screen protector off.
However, with the Ballistic one, it will peel your corner off very easily because the top and bottm of the ballistic aren't fixed. I have borrowed the Ballistic one from a friend and used it for two days, at the end of each day, I had to apply my screen protector again. If you need some images on the Ballistic one, tell me, I will do some for you.
Test.
Image part 3.
Looks like a good alternative to otter box. Thanks for sharing.
Sent from my Nexus 4
I also got this case in white, i absolutely love it except for the fact that it's white, and gets dirty if not taken care of. Other then that, it's awesome. I don't use it now, because i have lens for my phone camera, but when I did use it, i wasn't afraid of dropping it.
@opticaldh. What kind of screen protector are you using?
Sent from my Nexus 4 using xda premium
mcarbaja said:
@opticaldh. What kind of screen protector are you using?
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
I have a wet one. zagg.
another rugged case, which isn't available in Germany without 20€ shipping.... sad
Sent from my Nexus 7 using xda app-developers app
opticaldh said:
Test.
Click to expand...
Click to collapse
Did you erase the 'Acase' logo off ?
How do the buttons feel ?
Nice job on the review. I also have this case for my N4 and it is a great case for $15 as the reviews will show on Amazon.
I do have a wirless charger (lg-wpc 700) and it charges fine with this case on.
Sent from my SAMSUNG-SGH-I317
planoman said:
Nice job on the review. I also have this case for my N4 and it is a great case for $15 as the reviews will show on Amazon.
I do have a wirless charger (lg-wpc 700) and it charges fine with this case on.
Sent from my SAMSUNG-SGH-I317
Click to expand...
Click to collapse
Thanks for the Wifi-charger information :laugh:
New colors available (Blue, purple, red)
ht tp://ww w.amazon.com/Acase-Superleggera-Hybrid-layer-Google/dp/B00B4I2GJU
Just like Galaxy S III, multiple color options are available now for Nexus 4 too.
Also, found 2 YouTube unboxing/reviews for those interested.
Could anyone compare it to the ballistic case ?
This one looks thinner but still looks strong enough to keep protecting the phone from an average drop . :laugh:
Elh0mbreloco said:
Could anyone compare it to the ballistic case ?
This one looks thinner but still looks strong enough to keep protecting the phone from an average drop . :laugh:
Click to expand...
Click to collapse
I'm still waiting for the Superleggera to arrive (7-10 days). As soon as I get it I'll update what I find, compared to Ballistic Shell Gel SG.
I tried the Ballistic one from a buddy of mine but I personally did not like it. The build quality is very good with the ballistic and it feels like it's going to protect the phone well. But from day to day usability it's not very practical.
The inside silicone piece of the Ballistic is very soft/loose. It fits the phone well but without the support of the hard shell it tends to come off. That is why some people complain that the top and bottom of this case is not very fitting, since there is no hard shell support there.
The soft silicone with the protruding corners of the case sometimes gets stuck taking in/out of pant pockets.
In the YouTube reviews and the pictures by OP by the look of the Superleggera, the silicone seems stiffer than the Ballistic and the hard shell supports all four sides, hence more form fitting than the Ballistic and should not have any pocket issue.
nice review, looks nicer than the two later one i bough a few months back.
indoh said:
another rugged case, which isn't available in Germany without 20€ shipping.... sad
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
it's not just germany, any country outside the US pays around that much to get most things shipped from US amazon. Try to find it on another website.
AW: [Review]Acase dual layer Case
neotekz said:
nice review, looks nicer than the two later one i bough a few months back.
it's not just germany, any country outside the US pays around that much to get most things shipped from US amazon. Try to find it on another website.
Click to expand...
Click to collapse
other sides aren't better... got one from Amazon merchant for about 10$ shipping. but I'm waiting for it's arrival since 3 weeks
Sent from my Nexus 7 using xda app-developers app
Acase's are really good I have 1 on both my S3's and love them. I bought a Diztronic for my N4 as these were not available yet. Will be ordering 1 tomorrow.
Can anyone with this case (Acase Superleggera Nexus 4) comment on whether the case lip interferes with edge swiping (e.g. useful to switch tabs in Chrome). Thanks!
gatoruso said:
Can anyone with this case (Acase Superleggera Nexus 4) comment on whether the case lip interferes with edge swiping (e.g. useful to switch tabs in Chrome). Thanks!
Click to expand...
Click to collapse
How slippery is this case? I'm assuming the hard case (outer cover) is, but not the inside tpu bit. Is that true? So can I remove the hard case and expose the tpu while setting it on an uneven surface?
Your English is not bad at all!
Sent from my Nexus 4 using xda app-developers app
UPS just dropped this off 5 minutes ago. My first impression is that this is the best case for the gs4 for people who want a cover style case. This is the case that Samsung should have made for the gs4. It definitely mimics the curves of the gs4 very well. It has generous port openings that looks to even fit third party adapters. It also has the it blaster port opening. The headphone opening fits all of my headphones such as the vmoda m100, audeo phonak pfe232 and velodyne vpulse. The hinge is made of plastic but this case definitely feels high quality.
http://www.amazon.com/SPIGEN-SGP-Pr...3911394&sr=1-2-fkmr0&keywords=spigen+sg4+view
Sent from my HTC One using xda premium
My recommendation.... Buy this case immediately. It can be broken down into 3 different styles of case.
Sent from my HTC One using xda premium
i have the regular spigen slim armor case and love it. they make quality stuff
I have the white version of this case and completely agree with everything you said , highly recommend this case to anyone looking for a flip/sview case
bayniner said:
I have the white version of this case and completely agree with everything you said , highly recommend this case to anyone looking for a flip/sview case
Click to expand...
Click to collapse
This is the first case I had for the gs4 that I have been totally satisfied with.
Sent from my HTC One using xda premium
Can you flip the cover backward so you can hold the phone nicely? If yes, are the camera and flash still exposed? Thanks.
daihung1 said:
Can you flip the cover backward so you can hold the phone nicely? If yes, are the camera and flash still exposed? Thanks.
Click to expand...
Click to collapse
Yes you can fold it back all the way. The screen on the case exposes the camera. If you want the camera totally unblocked, then hold the cover halfway open.
Sent from my SGH-M919 using xda premium
Sent from my HTC One using xda premium
actually, im not a fan of that clip thing on the cover and how the hinge sticks out...makes it catch on clothing when removing from pockets
So i just use the normal samsung S-view case with the Spigen backplate for the s-view case
http://www.amazon.com/SPIGEN-SGP-Sa...=8-4&keywords=spigen+samsung+galaxy+s4+s-view
eyecon82 said:
actually, im not a fan of that clip thing on the cover and how the hinge sticks out...makes it catch on clothing when removing from pockets
So i just use the normal samsung S-view case with the Spigen backplate for the s-view case
http://www.amazon.com/SPIGEN-SGP-Sa...=8-4&keywords=spigen+samsung+galaxy+s4+s-view
Click to expand...
Click to collapse
Im not sure of how it would clip on clothing. If its in my pocket then it is closed. Its only open when I want full screen access.
Sent from my SGH-M919 using xda premium
dee32181 said:
Im not sure of how it would clip on clothing. If its in my pocket then it is closed. Its only open when I want full screen access.
Sent from my SGH-M919 using xda premium
Click to expand...
Click to collapse
the hinge ..not the clip.....
the hinge sticks out just a little bit, so if there are any lose threads in your pocket ,or suit jacket, it will pull at them
I wish they could have made the hinge more flush
dee32181 said:
This is the first case I had for the gs4 that I have been totally satisfied with.
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
Got the black one yesterday and loved the way it looked but shipped it back immediately. I thought "smooth black" would actually feel smooth but instead its kind of rough and almost sticky. Dust and lint immediately stuck to it before I even got the chance to pocket it. The texture was similar to the way the inner casing of otterboxes used to be (after enough complaints about dust and lint sticking to it they finally changed the material to a smoother, more dust free material).
Based on the reviews it seems like that white model is different? If so I may go for that instead. Otherwise the case is pretty slick.
Sent from my SCH-I545 using xda premium
eyecon82 said:
the hinge ..not the clip.....
the hinge sticks out just a little bit, so if there are any lose threads in your pocket ,or suit jacket, it will pull at them
I wish they could have made the hinge more flush
Click to expand...
Click to collapse
The hinge barely syicks out. I havent had any problems with it catching.
Sent from my SGH-M919 using xda premium
zeroxg4 said:
Got the black one yesterday and loved the way it looked but shipped it back immediately. I thought "smooth black" would actually feel smooth but instead its kind of rough and almost sticky. Dust and lint immediately stuck to it before I even got the chance to pocket it. The texture was similar to the way the inner casing of otterboxes used to be (after enough complaints about dust and lint sticking to it they finally changed the material to a smoother, more dust free material).
Based on the reviews it seems like that white model is different? If so I may go for that instead. Otherwise the case is pretty slick.
Sent from my SCH-I545 using xda premium
Click to expand...
Click to collapse
Mine gathers a lil lint but its not nearly as bad as the silicone from otterbox cases or untreated silicone. It wipes off very easily.
Sent from my SGH-M919 using xda premium
eyecon82 said:
actually, im not a fan of that clip thing on the cover and how the hinge sticks out...makes it catch on clothing when removing from pockets
So i just use the normal samsung S-view case with the Spigen backplate for the s-view case
http://www.amazon.com/SPIGEN-SGP-Sa...=8-4&keywords=spigen+samsung+galaxy+s4+s-view
Click to expand...
Click to collapse
I prefer the case having the clip todue to the fact that it keeps the case closed. I dont use my samsung s view case due to the case flapping open.
Sent from my SGH-M919 using xda premium
zeroxg4 said:
Got the black one yesterday and loved the way it looked but shipped it back immediately. I thought "smooth black" would actually feel smooth but instead its kind of rough and almost sticky. Dust and lint immediately stuck to it before I even got the chance to pocket it. The texture was similar to the way the inner casing of otterboxes used to be (after enough complaints about dust and lint sticking to it they finally changed the material to a smoother, more dust free material).
Based on the reviews it seems like that white model is different? If so I may go for that instead. Otherwise the case is pretty slick.
Sent from my SCH-I545 using xda premium
Click to expand...
Click to collapse
Yes I have the white model and it has a gloss finish
---------- Post added at 06:04 PM ---------- Previous post was at 05:51 PM ----------
eyecon82 said:
actually, im not a fan of that clip thing on the cover and how the hinge sticks out...makes it catch on clothing when removing from pockets
So i just use the normal samsung S-view case with the Spigen backplate for the s-view case
http://www.amazon.com/SPIGEN-SGP-Sa...=8-4&keywords=spigen+samsung+galaxy+s4+s-view
Click to expand...
Click to collapse
I have both the spigen sview and the samsung sview with the spigen cover, the samsung and spigen combo Is nice but the case would constantly open in my pocket due to lack of latch and their for was draining my battery, with the spigen sview dont have to worry about it opening and it looks alot nicer and offers more protection, ive had mine since release and it have never once gotten cought on anything
Mine should be arriving this week. I cannot wait
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
dee32181 said:
The hinge barely syicks out. I havent had any problems with it catching.
Sent from my SGH-M919 using xda premium
Click to expand...
Click to collapse
it's the 90 degree angle that gets caught on things..sometimes..so i made a habit of putting my thumb on it before taking it out of the pocket
eyecon82 said:
it's the 90 degree angle that gets caught on things..sometimes..so i made a habit of putting my thumb on it before taking it out of the pocket
Click to expand...
Click to collapse
Im not saying you didnt have problems. I am saying I havent had any. I appreciate your input though.
Sent from my SGH-M919 using xda premium
dee32181 said:
Im not saying you didnt have problems. I am saying I havent had any. I appreciate your input though.
Sent from my SGH-M919 using xda premium
Click to expand...
Click to collapse
Just noticed you have a screen protector and a flip cover!
Paranoid much?
Seriously man, ditch the screen protector. It takes away from the screen beauty and screws up the tactile smoothness between your finger and screen
Howdy folks, does anybody have any experience with this case?
http://www.goballisticcase.com/products/samsung-galaxy-note-8-0-ballistic-tough-jacket-series-case
It looks like a nice alternative for the otterbox..
Sent from my GT-N7000 using xda app-developers app
I'd also be keen to know if anyone has one and their thoughts on it.
Wish UAG made a case for the Note 8.
I ordered it for $39 dollars on eBay, I hope to get within a week..I'll let you know how it is.
Ballistic reviews for other devices look very promising!
Sent from my GT-N7000 using xda app-developers app
Received it today; first impressions...it fits like a glove, but it's easy to put on.
The silicone is the inner shell so it doesn't attract any dust. The plastic outside shell has a nice texture and isn't slippery. The only rubber parts which can be seen are the"enforced"edges, which serve the purpose of protection and makes sure that your screen never touches anything when laid down on its face and a narrow ring around the screen. The case however doesn't have covers for the ports(usb, camera, headphone and speakers) I had the idea that it would come with a screen protector, but my dead brain cells must have misunderstood the description. It comes however with a protective cover which also serves as a stand. It feels sturdy and with it on, your note is well protected, it makes however quite heavy like a brick.
The "phone"still fits in my hand, but that is without the cover attached.
All in all I'm quite satisfied with this case it will protect my note well and the design is not too shabby either.
I'll give y'all an update in two weeks.
Cheers my friends.
Sent from my GT-N5100 using xda app-developers app
misternagoya said:
Received it today; first impressions...it fits like a glove, but it's easy to put on.
The silicone is the inner shell so it doesn't attract any dust. The plastic outside shell has a nice texture and isn't slippery. The only rubber parts which can be seen are the"enforced"edges, which serve the purpose of protection and makes sure that your screen never touches anything when laid down on its face and a narrow ring around the screen. The case however doesn't have covers for the ports(usb, camera, headphone and speakers) I had the idea that it would come with a screen protector, but my dead brain cells must have misunderstood the description. It comes however with a protective cover which also serves as a stand. It feels sturdy and with it on, your note is well protected, it makes however quite heavy like a brick.
The "phone"still fits in my hand, but that is without the cover attached.
All in all I'm quite satisfied with this case it will protect my note well and the design is not too shabby either.
I'll give y'all an update in two weeks.
Cheers my friends.
Sent from my GT-N5100 using xda app-developers app
Click to expand...
Click to collapse
Do you still have access to the S-pen?
Sure no problem, the spen is easy to remove and all the buttons(volume etc) react perfect even with such a protective case.
Sent from my GT-N7000 using xda app-developers app
Can you post some pictures please?
Will do tomorrow.
Sent from my GT-N5100 using xda app-developers app
misternagoya said:
I ordered it for $39 dollars on eBay, I hope to get within a week..I'll let you know how it is.
Ballistic reviews for other devices look very promising!
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
I can't find it for that price anywhere. Happen to have a link? I'm interested in picking this up over the otterbox
I bought it through this shop, fast and cheap shipping!
http://www.ebay.com/itm/171090399902?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
I had to use ebay since I live in Japan, otherwise this offer on Amazon would have even been better!:crying:
http://www.amazon.com/BALLISTIC-Samsung-Charger-Radiation-Shield/dp/B00EFBB20M/ref=pd_rhf_se_p_tnr_1
pics
thanks for sharing your impressions and the pictures. i am very tempted to pick one of these up myself. I got a simple/cheap flip case to hold me over temporarily, but to be quite frank, I am too damn clumsy not to invest in more serious protection for my electronic devices.
Note 8 is my first case, so was curious how such a sturdy case felt on the device. Ballistic basically won over my loyalty two smartphone ago...had the equivalent case on my Atrix, and one day while running to catch a bus my phone fell out of my pocket and when flying, slammed into the asphalt of the highway/street i was running across hard enough to bounce three times and make it halfway back towards the other side of the street. I was horrified, went to retrieve it... not one single scratch, not one sign that anything had happened, just nothing. Those massive corners do their job, is all I have to say...
Hoping the case for this device is as reliable.
I can highly recommend this case, after two weeks of using, it has been nothing but good to my sweet note. The case and the stand feel sturdy, and when the note is my bag, the cover protects the screen...good stuff and a hell of a lot cheaper than the otter box.
Sent from my GT-N5100 using xda app-developers app
just received mine today. this case is perfect but i am wondering how come the front cover which acts as a kickstand has a big hole that we will display the name samsung. i find it weird and find the hole redundant.
any thoughts?
When you put the cover on the back, the hole is a cutout for the camera.
Sent from my GT-N5100 using xda app-developers app
misternagoya said:
When you put the cover on the back, the hole is a cutout for the camera.
Sent from my GT-N5100 using xda app-developers app
Click to expand...
Click to collapse
yup i know but still find it funny as that hole will trap dust over a period of time.
Just picked up this case. It's very nice. Good tight fit and solid all around. I had the poetic revolution case for one day and tossed it. Pure junk IMO.
mictek said:
Just picked up this case. It's very nice. Good tight fit and solid all around. I had the poetic revolution case for one day and tossed it. Pure junk IMO.
Click to expand...
Click to collapse
Has anyone noticed the case puts too much pressure on the back of the tablet. This is causing white spots to appear on the screen. Looks like LCD mura, but goes away when you take the case off. I've sent Ballistic an email, maybe mine is defective.
No I haven't experienced this...
Sent from my GT-N5100 using xda app-developers app
misternagoya said:
No I haven't experienced this...
Sent from my GT-N5100 using xda app-developers app
Click to expand...
Click to collapse
It's hard to notice on mine, but on a white background you can see it. Thanks for the reply.