First of all sorry for my bad english
The things that you need to fabricate charging dock are as follows:
1) Old CD case
2) Old sony ericsson data cable
3) Some fast glue
1) Disassemble CD case in order to use only the back side
2) From data cable remove plastic fixing legs
3) Mesure with the phone and mark the correct position of the cable ( the picture of the cable should be upwards)
4) Using some fast glue bond the connector to de CD case and voalla the dock is ready
And hese are the pictures. Maybe tomorrow i will make it like stand but for now is working ok for night charging
ht
Yeah, nice work!
Did you see this topic ?
http://forum.xda-developers.com/showthread.php?p=38501016
There are other DIY charging systems.
"I know that my English isn't perfect, but I still hope it's comprehensible." Send over the cool Xperia Z
Now, I will adapt this for car holder !
TurboKan said:
Now, I will adapt this for car holder !
Click to expand...
Click to collapse
Share the result after that
There is already a thread to share these. Let's keep them in one place.
Sent from my C6603 using Tapatalk 2
alias_neo said:
There is already a thread to share these. Let's keep them in one place.
Sent from my C6603 using Tapatalk 2
Click to expand...
Click to collapse
Ok if possible delete my tread i will continue posting in another
It works! But, what's the voltage? Isn't it low?
Why would the voltage be low? USB is a standarized port so there's no difference between chargers when it comes to voltage.
The other thing is the current that varies from 500mA (USB 2.0 port) and 900mA (3.0 port) up to 3mA. The current depends on the charger not the cable.
I tried making this and the charging time takes a long time. I am gaining about 10% per hour. Is this normal?
zaku2s said:
I tried making this and the charging time takes a long time. I am gaining about 10% per hour. Is this normal?
Click to expand...
Click to collapse
Depends. Which charger do y use, more precisely how many amps does it output? Maybe you contact surfaces are to small. A pic would be welcome
"I know that my English isn't perfect, but I still hope it's comprehensible." Send over the cool Xperia Z
I don't think the charger has any effect, I believe the pins are set up to draw a maximum of 1A, probably due to it being a dock, it wants to "slow" charge.
As for it taking a long time, I found that the cable had a huge effect, switching to a better cable made it charge correctly.
Sent from my C6603 using Tapatalk 4 Beta
I am using the stock charger. It would probably be the contact point. I don't want to scrach my XZ so I didn't push it all the way down. I'll try again when I get home
alias_neo said:
I don't think the charger has any effect, I believe the pins are set up to draw a maximum of 1A, probably due to it being a dock, it wants to "slow" charge.
As for it taking a long time, I found that the cable had a huge effect, switching to a better cable made it charge correctly.
Sent from my C6603 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Ah, correct, wiring, to small section causes more energy loss. So taking a thicker wire isn't l luxury. But standard usb wire should work.(I used a Sony Ericsson fastport data wire)
Could also be the soldering, if it isn't sold properly you get bad contracts.
I'm using a 750mA charge ( from the x10) and it never takes so long to charge even over my custom system running a sleep taking app over night.
"I know that my English isn't perfect, but I still hope it's comprehensible." Send over the cool Xperia Z
Do anyone know the model number or name of the old ericsson cable?
Sent from my C6603 using Tapatalk 4
pjgowtham said:
Do anyone know the model number or name of the old ericsson cable?
Sent from my C6603 using Tapatalk 4
Click to expand...
Click to collapse
The connector was called FastPort, so look for something like FastPort usb data wire
"I know that my English isn't perfect, but I still hope it's comprehensible." Send over the cool Xperia Z
naphets8 said:
The connector was called FastPort, so look for something like FastPort usb data wire
Click to expand...
Click to collapse
I think it's sony dcu-60 am I right?.
Sent from my C6603 using Tapatalk 4
pjgowtham said:
I think it's sony dcu-60 am I right?.
Sent from my C6603 using Tapatalk 4
Click to expand...
Click to collapse
Can't tell you from scratch. Wanna say Google is your friend.
"I know that my English isn't perfect, but I still hope it's comprehensible." Send over the cool Xperia Z
Does anyone have any ideas because I found an old DIY speaker and I was wondering if anyone had ideas for a dock in which it could be used.
Sent from my C6603 using xda app-developers app
I wanted the same dock+speaker end result so I ended up using my BT speaker and using tasker (but can use smart connect) to auto on BT when docked which it then reconnects to speaker when in range then turns BT off when undocked. Obviously totally different than wjatbtou have to work with but I already had the speaker so it cost me nothing to do.
Sent from my C6606 using Tapatalk 4
slyviper1700 said:
Does anyone have any ideas because I found an old DIY speaker and I was wondering if anyone had ideas for a dock in which it could be used.
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
Hi, I would go with something like the attachment. Using a sbh20(or similar) for wireless sound transmission. Speaker on the side. ( if you thing is stereo, one on each side), and the phone in landscape mode on a inclined surface with the pins on the bottom.
"I know that my English isn't perfect, but I still hope it's comprehensible." Send over the cool Xperia Z
Related
ok, i've tested a nokia cable and the stock cable, but the phone will not charge in my car with either. did motorola really have the idea of forcing atrix owners to purchase the car dock to charge on the go?
this is a large problem for me since my sport has me traveling a lot. i consume a lot of battery running gps and music in my car. this is not good.
Weird I use a FM converter one my phone to play music over the radio and it has a USB port I plug into and charge my phone at the same time. Might try another charger?
JRW 28 said:
Weird I use a FM converter one my phone to play music over the radio and it has a USB port I plug into and charge my phone at the same time. Might try another charger?
Click to expand...
Click to collapse
What is the output on your charger?
Sent from my MB865 using XDA App
svtfmook said:
ok, i've tested a nokia cable and the stock cable, but the phone will not charge in my car with either. did motorola really have the idea of forcing atrix owners to purchase the car dock to charge on the go?
this is a large problem for me since my sport has me traveling a lot. i consume a lot of battery running gps and music in my car. this is not good.
Click to expand...
Click to collapse
Nope. I use a generic cig lighter charger w/usb port and a generic cord from a local cell phone shop and it works on my phone perfectly. However, all are not created equal. I was going to give my generic charger to my gf cause I bought a fancy red one (same type, but with a red rubberized coating on it) but it wouldnt work on my phone, had no issue working on my ipod touch though. So yeah, some may not work, not quite sure why.
Sent from my MB865 using XDA App
svtfmook said:
What is the output on your charger?
Sent from my MB865 using XDA App
Click to expand...
Click to collapse
I don't have a clue
I use this plus this in the truck. Works like a champ. Can't get much cheaper either.
bigddybn said:
I use this plus this in the truck. Works like a champ. Can't get much cheaper either.
Click to expand...
Click to collapse
Same exact charger I use!
Sent from my MB865 using XDA App
Just wondering if anyone knows the pinout for the 5 contacts on the back so i could make myself a speaker/charger dock until an official one becomes more available.
I've wondered this myself. After running a meter across the pins. Pins 2&4 seem to accept a voltage pin 5 is a ground I think. I feel through a guesstament that it follows the USB pinout in flat lateral form.
Sent from my HTC One X using xda premium
Usually I would literally just test each pin to see what was what but obviously being an expensive phone and canceling my insirance I do not want to short anything out, and yes it seems logical for one of the end contacts to be a ground, did you put a voltage into pin 2 & 4? If so how much?
Sent from my HTC One X using XDA App
I've been getting read to cut an older USB cable and test that way. But I used 4.4 volts. I to don't want to kill the warranty by ripping the phone apart. After I cut the USB I'm going to make a jig and do tests. If I find anything out I'll post here.
Sent from my HTC One X using xda premium
It's the micro USB pinout in pogo form..
1. 5vcc
2. Data -
3. Data +
4. Audio out mono
5. Ground.
Left to right pinout with the camera facing your left shoulder.
Sent from my HTC One X using xda premium
Thank you, I shall post a pic of homemade dock when I have the time to make one.
Sent from my HTC One X using XDA App
Ok. I tested. Connected HTC ONE X to lab power supply (5V 1A limit) and after a while (2-3 seconds) is started charging and 0.44A was flowing into phone. It was almost fully charged at the time.
Does anybody know how to get audio out on audio out pin?
And why Data - pin has 1,8V in reference to ground at all times?
edit:
Ok. I measured again. 0.44A and phone goes to charging (USB). I don't have time today to see what happens if you connect Data + adn - pins...
But still no luck with audio.
dkirchik said:
It's the micro USB pinout in pogo form..
1. 5vcc
2. Data -
3. Data +
4. Audio out mono
5. Ground.
Left to right pinout with the camera facing your left shoulder.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
can you do USB OTG out via POGO?
z0bug33 said:
can you do USB OTG out via POGO?
Click to expand...
Click to collapse
i wonder that too, "4. Audio out mono" is this really correct ? or is it the yellow identifier in a normal micro usb
Vcek said:
i wonder that too, "4. Audio out mono" is this really correct ? or is it the yellow identifier in a normal micro usb
Click to expand...
Click to collapse
Bump
hey guys you can check this site out http://techno-fix.com/ . i found my pinout searches there. there are very usefull things
hey guys i just had this thing in mind...many a times my hands get a bit sweaty or its very habitual for me to kinda use the phone wid wet hands..
can the contact with the docking pins cause any issue?
I am installing a tab 2 7 as a permanent fixture to my car dashboard. I would like to charge the tablet in ac mode when the ignition is on and, trickle (USB) charge while the ignition is off.
As well as saving my car battery, this will also be my trigger for tasker to activate / deactivate the display.
My question is this, if I use a relay to short the two data pins on the USB cable will this switch to ac charge mode.
An alternative may be to use a standard Car charger and use a relay to break the continuity in the middle cores when the ignition is off
Sent from my HTC One X using Tapatalk 2
Anyone
Sent from my HTC One X using Tapatalk 2
KrisPerry said:
I am installing a tab 2 7 as a permanent fixture to my car dashboard. I would like to charge the tablet in ac mode when the ignition is on and, trickle (USB) charge while the ignition is off.
As well as saving my car battery, this will also be my trigger for tasker to activate / deactivate the display.
My question is this, if I use a relay to short the two data pins on the USB cable will this switch to ac charge mode.
An alternative may be to use a standard Car charger and use a relay to break the continuity in the middle cores when the ignition is off
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
OK I'm guessing no one has tried this yet. I have ordered the parts and will post my findings in due course
Sent from my HTC One X using Tapatalk 2
http://forum.xda-developers.com/showpost.php?p=27443722&postcount=4
This may help you.
bark777 said:
http://forum.xda-developers.com/showpost.php?p=27443722&postcount=4
This may help you.
Click to expand...
Click to collapse
Yeah thanks I had already read this, although it is still unclear what is actually going on
Sent from my HTC One X using Tapatalk 2
I'm going to be attempting the same thing with a Droid X I'm using as a DVR in my car. Any updates? According to this, once AC charging is initiated, removing the short will not revert the charging mode back to the lower rate without interrupting the connection.
MasterTactician said:
I'm going to be attempting the same thing with a Droid X I'm using as a DVR in my car. Any updates? According to this, once AC charging is initiated, removing the short will not revert the charging mode back to the lower rate without interrupting the connection.
Click to expand...
Click to collapse
I haven't had a chance to look at it yet. But this sounds like it may put a spanner in the works. I may have to rethink
Sent from my HTC One X using Tapatalk 2
KrisPerry said:
I haven't had a chance to look at it yet. But this sounds like it may put a spanner in the works. I may have to rethink
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
I'm still waiting on the boat from China for my parts, but had an idea in the meantime. Perhaps a second relay to simply interrupt the +5V wire (and a capacitor to add even more of a delay?) would do the trick. I'm no EE, but it seems like this may do the trick.
MasterTactician said:
I'm still waiting on the boat from China for my parts, but had an idea in the meantime. Perhaps a second relay to simply interrupt the +5V wire (and a capacitor to add even more of a delay?) would do the trick. I'm no EE, but it seems like this may do the trick.
Click to expand...
Click to collapse
The basic principal doesn't work anyway. No matter if the d cores are disconnected
Sent from my HTC One X using Tapatalk 2
My new plan is to switch in a resistor to trick the Tablet into thinking it's docked. Then use this to trigger events in tasker
Sent from my HTC One X using Tapatalk 2
KrisPerry said:
My new plan is to switch in a resistor to trick the Tablet into thinking it's docked. Then use this to trigger events in tasker
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
@KrisPerry - Can you elaborate more on how to accomplish this with the Galaxy Tab 2? I have seen threads on how to do this for the S2/S3 with the micro USB connector, but nothing for the the Galaxy Tab 2. I would be very interested if this works for you.
Cheers!
stranger8 said:
@KrisPerry - Can you elaborate more on how to accomplish this with the Galaxy Tab 2? I have seen threads on how to do this for the S2/S3 with the micro USB connector, but nothing for the the Galaxy Tab 2. I would be very interested if this works for you.
Cheers!
Click to expand...
Click to collapse
Ok first I ordered the breakout board from http://www.podgizmo.com. this allows components to be soldered directly to the relevant pins.
I simply used a 33 and a 10ohm resistor to give approx 7.5 ohm resistance. When the ignition is started a relay switches the resistance across the deviceID pin. The Tablet then thinks it has been car docked and subsequently runs a specific tasker profile
KrisPerry said:
Ok first I ordered the breakout board from podgizmo. this allows components to be soldered directly to the relevant pins.
I simply used a 33 and a 10ohm resistor to give approx 7.5 ohm resistance. When the ignition is started a relay switches the resistance across the deviceID pin. The Tablet then thinks it has been car docked and subsequently runs a specific tasker profile
Click to expand...
Click to collapse
@KrisPerry - Brilliant, this is exactly what I have been looking for. Do you already have this working? Just to confirm, is the deviceID pin you reference pin 13 (ACCESSORY_ID)?
I'd love to learn more about your setup if you have it documented somewhere (I didn't find anything on XDA).
Cheers!
stranger8 said:
@KrisPerry - Brilliant, this is exactly what I have been looking for. Do you already have this working? Just to confirm, is the deviceID pin you reference pin 13 (ACCESSORY_ID)?
I'd love to learn more about your setup if you have it documented somewhere (I didn't find anything on XDA).
Cheers!
Click to expand...
Click to collapse
Correct, between pin 13 and ground. I have it working on the bench. Next step is to test in the car before installation. I'll maybe document the whole process once completed
Sent from my HTC One X using Tapatalk 2
Update so far.
Sent from my HTC One X using Tapatalk 2
Sent from my HTC One X using Tapatalk 2
Hello all XDA friends! Finally, the 9ft microUSB-to-aux-out cable is available as a stand alone product. There has been tons of requests for this as many of you already have a phone holder in the car and you only need the cable so you can play music/gps sound (app sound) through the car-speakers. The microUSB end plugs into the phone phone and it will charge the battery when the standard USB end is plugged into a car-charger or into the vehicle's USB port (although some USB ports have slow charging rate!).
We've also seen a huge interest in using this cable together with a home stereo or with the "old boom box". Very cool application is to connect the Galaxy phone to a boom-box and put the handset into the beach bag (9ft is a loooong cable!).
When you inserted the cable the "DockMode" will start. Download an app like the iBOLT Dock'n Drive and mange your favorite apps this way. You can also set Slacker Radio, TuneIn or Ulysee Speedomter or CarHome Ultra as default "home screen". Note that you can also set WiFi and Bluetooth to go on or off automatically when handset is connected to the cable.
This new version of the "Dock'n Play" cable should be static free and will provide great sound quality. Feel free to use this thread to ask any questions about Samsung DockMode, aux-out etc. The developer for CarHome Ultra and Ulysee Speedomter can also chime in and answer questions if there's a need. Have fun!
The price is $19.95 and it's available for Amazon Prime for a few days (only a few hundred in stock).
http://www.amazon.com/gp/product/B009PN6APM
I want to buy the iBolt dock itself. Does this cable come with it?
Sent from my SCH-I545 using Tapatalk 4 Beta
le0.br4zuc4 said:
I want to buy the iBolt dock itself. Does this cable come with it?
Sent from my SCH-I545 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Yes, if you buy the xProDock this cable comes with the Dock. However, if you buy the sPro or the ProDock it does not come with the holder. We have a lot of people wanting this as they either don't want to use a holder/dock in the car or they already have something else that works well.
MikaelPe said:
Yes, if you buy the xProDock this cable comes with the Dock. However, if you buy the sPro or the ProDock it does not come with the holder. We have a lot of people wanting this as they either don't want to use a holder/dock in the car or they already have something else that works well.
Click to expand...
Click to collapse
The xProDock I see on amazon (prime) says is comes with a usb cable and it has a picture of a regular usb cable.
I want to buy the dock because I know I will be able to use with my and my wife's phone but I want to make sure I get this cable too
Sent from my SCH-I545 using Tapatalk 4 Beta
You guys should check out in-depth review of iBolt xPro Dock I just posted here: http://forum.xda-developers.com/showthread.php?t=2349447
This one is universal Samsung dock for S3, S4, and Note 2. Bar none - the best car dock and the best value with cable already included. New Dock'n'Drive free app is slick as hell, and I tested it to work great with S4!
be careful !
I have a 2amp charger but with the iBolt cable, my phone charging to 0.720 amp -_-'
Do you have any available for Canadian buyers
Sent from my SGH-I337 using Tapatalk 4 Beta
nico3838 said:
be careful !
I have a 2amp charger but with the iBolt cable, my phone charging to 0.720 amp -_-'
Click to expand...
Click to collapse
Are you talking about original Sammy 2A charger or some ebay $4 charger that claims to be 2A while in reality current limited to under 1A (and thus due to losses and conversion efficiency down to 720 mA)?
I have a cheap charger for 5€ but with simple USB cable : 1.9amp.
With iBolt cable (for car mode and audio out) just 0.7amp
Tested with Galaxy charging current
In other thread http://forum.xda-developers.com/showpost.php?p=42633527&postcount=44
Confirmed, I'm getting crap charging rates , I'm so disappointed
no shipping to UK? I think I'll make my own one, 9ft is a bit too long for me and I can also use quality components to cut down on interference and lowered charging rates.
Sent from my Transformer Prime TF201 using Tapatalk 4 Beta
scote said:
no shipping to UK? I think I'll make my own one, 9ft is a bit too long for me and I can also use quality components to cut down on interference and lowered charging rates.
Sent from my Transformer Prime TF201 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Would like to see what you build. Pictures please.
Sent from my Nexus 7 using Tapatalk 2
I'd been emailing the company about this for a few weeks when I first heard they were going to launch the standalone cable and they never got back to me. I guess this is why. Disappointing!
nico3838 said:
I have a cheap charger for 5€ but with simple USB cable : 1.9amp.
With iBolt cable (for car mode and audio out) just 0.7amp
Tested with Galaxy charging current
In other thread http://forum.xda-developers.com/showpost.php?p=42633527&postcount=44
Click to expand...
Click to collapse
Look guys, stock Sammy firmware limits charging in smartdock mode to .7A. If that is unnaceptable, run a custom kernel like Perseus or Devil and you can up it to 1.7A.
Sent from my SGH-T889 using Tapatalk 4 Beta
I cannot get audio from my GS4 out using this cable... is there anything I am missing?
Le0_Br4zUc4 - Sent from my BEAST SCH-I545 using Tapatalk 4
Did you enable it in your Accessory settings?
le0.br4zuc4 said:
I cannot get audio from my GS4 out using this cable... is there anything I am missing?
Le0_Br4zUc4 - Sent from my BEAST SCH-I545 using Tapatalk 4
Click to expand...
Click to collapse
Anyone know how to enable dock mode on the i9505G? I don't have an accessories menu so I'm thinking I'm screwed.
the dock isn't well made.. if you live anywhere that gets hot, the suction cup vibrates on bumps when hot.. its cheaply made for a 40$ product in my opinion..
I have no complaints with the quality of the dock. I live in south Florida where it's crazy hot now and my car stays all day long outside. I have no problems with the dock losing suction at all
Le0_Br4zUc4 - Sent from my BEAST SCH-I545 using Tapatalk 4
I'm getting a ground loop buzz with this. Anyone else?
The charger lead for the 1st gen Sony SmartWatch is dreadful! Barely makes contact unless you physically squeeze the watch and the back-clip together. I'm guessing there's no better alternative, due to the fact it's a non-standard connector, but thought I'd ask??
Same for me but they had changed the design in smartwatch 2 because of awful design in first version. I have the same problem while charging.
Transformer TF101 cihazımdan Tapatalk kullanılarak gönderildi
biker750 said:
Same for me but they had changed the design in smartwatch 2 because of awful design in first version. I have the same problem while charging.
Transformer TF101 cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
It's rubbish isn't it!
Thing is, I don't use it enough to warrant upgrading to the Smartwatch 2 - which I'm aware uses a standard micro-USB port - as I only use it when I go running which is very rare, so like I said no point me upgrading.
Just frustrates me how flimsy the connection is, it never gets a proper charge because of it.
alex_ncfc said:
The charger lead for the 1st gen Sony SmartWatch is dreadful! Barely makes contact unless you physically squeeze the watch and the back-clip together. I'm guessing there's no better alternative, due to the fact it's a non-standard connector, but thought I'd ask??
Click to expand...
Click to collapse
You can solve it by rubbing the hole gently with some none sharp metal. No need to squeeze your watch so hard. It will charging normally.
There was in this forum explained a way to make the charger as mini usb but I'm not able to found it now :S
Sent from my GT-N7100 using Tapatalk
alex_ncfc said:
The charger lead for the 1st gen Sony SmartWatch is dreadful! Barely makes contact unless you physically squeeze the watch and the back-clip together. I'm guessing there's no better alternative, due to the fact it's a non-standard connector, but thought I'd ask??
Click to expand...
Click to collapse
I clip a clothespin on it when I charge it. It's not pretty, but it's simple and it works.
I also have the Smartwatch mn2 and the charging connection is not very good. You can say what you like about the Live View but at least it uses a micro USB connection.
Sent from my iPad using Tapatalk