Sure I'm not mike1986. or a Dev, but it's not my first guide for this type of process. (N7 3G & TF300), and I've wrote this guide for help everyone who wants to unlock, rooting, flashing, restore back Stock his HTC One and use Fastboot easily.
Because If you have some problems for install or use the ADB Line commands, the simple way is to use Fastboot, that's why i've inserted this guide with all commands
You will find:
Post 1 => [TUTORIAL]Unlock - Flash Recovery - Rooting - S-OFF and Gets SUPERCID your HTC One
Post 2 => [GUIDE] Download HTC One M7 RUU - Restore back STOCK
Post 3 => HELP FOR FLASH MORE FASTER WHEN YOU USE FASTBOOT LINE COMMAND
Note: To access the Bootloader, Flash etc. mode on HTC One press your Power Button + Volume key
Click to expand...
Click to collapse
Requirements:
Click to expand...
Click to collapse
- AIO Toolkit for the One => from @hasoon2000
- SDK Platform
Or
- Fastboot files or Platform Tools
And
- recoverystock.img
Don't forget that you should need Android SDK Installed on your machine or you can download Fastboot Files or Platform Tools and install it on the root of your PC in one folder named "fastboot" or "platform tools".
Once your folder created and named "fastboot" or “platform tools”, extract the files into this folder.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1st Step:
Using the AIO from Hasoon2000 for the install of the drivers for your One
HOW TO UNLOCK YOUR ONE:
Click to expand...
Click to collapse
DON'T FORGET, USING HTCDEV UNLOCK WILL VOID YOUR WARRANTY!
The process by HTCDev for unlock your One
Go to HTCDev.com website
Register yourself
Click on Unlock Bootloader option
Select “All other supported Models” - not others
Follow the on-screen instructions and at the end your One will be unlocked
You will see [highlight]“UNLOCKED”[/highlight]
Click to expand...
Click to collapse
HOW TO FLASH THE RECOVERY FOR YOUR ONE
Click to expand...
Click to collapse
For the moment, we have some problems with different recoveries. The best way is to use this process:
Use the AIO for flashing the stock recovery from HTC (select your own recovery)
Once your stock recovery flashed, make a backup of your recovery.
Then it’s done, you can flash the recovery that you want (for my part it’s TWRP 2.5.0.0), don't forget to reboot to bootloader and don't wipe your phone
Code:
[B]C:\platform-tools>fastboot flash recovery recoverystock.img[/B]
Once your recovery flashed you will see in the bootloader above
[highlight]“UNLOCKED”[/highlight], [highlight]“TAMPERED”[/highlight]
Click to expand...
Click to collapse
HOW TO ROOT YOUR ONE
Click to expand...
Click to collapse
Just select "Perm root" to AIO Tool.
It’s really simple.
Reboot and try your root with an app as Titanium Backup.
You will may to update the binaries of SU.
HOW TO S-OFF YOUR ONE
Click to expand...
Click to collapse
If you want to S-OFF your One, it's useless to write again another guides because you will find here the both ways for S-OFF your One.
Note: if you're on Hboot 1.54 then s-off can't be achieved at the moment.
Click to expand...
Click to collapse
1 - [S-OFF] revone - DEVELOPER EARLY ACCESS PREVIEW EDITION by ieftm - and REVOLUTIONARY Team
2 - [S-OFF] Moonshine S-OFF - UPDATED -- WINDOWS SUPPORT ADDED by Fuses
HOW YOUR ONE GETS SUPERCID
Click to expand...
Click to collapse
1 - Open terminal/command prompt and type (copy paste command below or make sure that you have EIGHT 1's):
Code:
fastboot oem writecid 11111111
2 - Reboot your phone into bootloader mode (by typing: adb reboot bootloader) and verify CID#. It should look similar to this screenshot:
And now you can play with your subsonic phone:victory:
[GUIDE] Download HTC One M7 RUU - Restore back STOCK
[GUIDE] Download HTC One M7 RUU - Restore back STOCK
Find your HTC One M7 Rom Update Utility (RUU) is very useful if you need to restore back your device to Stock after any modification you’ve made. If you have rooted your One, unlocked its bootloader, installed custom recovery and roms and finally you want decided to getting back to official firmware and then to get or accept future OTA updates again. It’s the best way to restore back your device to Stock.
Coming back to stock is also useful if you have some bugs (for fixing it), Bootloop, stuck in boot screen logo and freeeeezzziiiinnnngggg, etc....
But before to going back to stock, you need to know :
Your bootloader will never be “LOCKED” again !!! You can’t restore it, just RELOCK it.
The “TAMPERED” text in your bootloader will only disappear after the flash of your RUU.
1 - Where I can can find the right RUU for my HTC One-M7 ?
First, you need to download the RUU that matches your device according to what carrier you have, hboot version, and baseband. The RUU will not run if it doesn’t match your device.
If you don’t know your One M7 variants, go to see the end of the post,
and this tread - HTC One variants [U/UL/WL]
But first download and install the necessary files prior to execute this properly. If you have already installed those files, just check theirs.
HTC Sync(Windows only)
Java Runtime Environment.
Android SDK | Android Developers.
Platform tools
Fastboot files
2 - Checking HTC One hboot and overall firmware version
If you already have this installed on your computer then proceed to checking your device info.
To find the correct firmware info of your device (modeid and cidnum), just simply run your device using the below fastboot command.
Hold the power button down until the phone power off.
Press Volume Down and Power to start the device into Bootloader mode.
Use the Volume buttons to select up or down. Highlight Fastboot and press the Power button.
Connect the device to the computer via a usb cable.
Run command prompt. ( Start > Run > type CMD).
Code:
C:\fastboot>fastboot devices
Code:
C:\fastboot>fastboot getvar all
You can read the whole logcat and get your device correct hboot and baseband version.
Download the right RUU for your HTC One from this thread :[COLLECTION] HTC M7 RUU, OTA, and Stock Nandroid Downloads
3 - Running HTC One M7 RUU
First make sure that your battery is fully charge 100%
If you are ready, you need to re-locked the bootloader before to going back to the RUU
Set the phone in fastboot mode (select fastboot from hboot menu), then plug-in USB cable.
Run the command prompt window, go to your fastboot directory
Enter the following commands:
Code:
fastboot devices
Code:
fastboot oem lock
It will then prompts you into a security warning and then relock your bootloader.
Now, you can boot your device into fastboot mode again,
Run the RUU.exe once your device is in fastboot USB mode.
Simply follow the RUU prompts, just wait and don’t unplug the phone until completely finishes.
The phone will reboots once completes and finally your phone should be on stock again.
RUU VARIANTS:
x.xx.61.x - Orange UK (United Kingdom)
x.xx.65.x - Orange CH (Switzerland)
x.xx.69.x - Orange PL (Poland)
x.xx.73.x - Orange FR (France)
x.xx.75.x - Orange ES (Spain)
x.xx.110.x - T-Mobile UK (United Kingdom)
x.xx.111.x - T-Mobile DE (Germany)
x.xx.112.x - T-Mobile AT (Austria)
x.xx.113.x - T-Mobile CZ (Czech Republic)
x.xx.118.x - T-Mobile PL (Poland)
x.xx.161.x - Vodafone UK (United Kingdom)
x.xx.163.x - Vodafone FR (France)
x.xx.165.x - Vodafone IT (Italy)
x.xx.166.x - Vodafone CH-DE (Switzerland - Germany)
x.xx.168.x - Vodafone GR (Greece)
x.xx.169.x - Vodafone AT (Austria)
x.xx.206.x - O2 UK (United Kingdom)
x.xx.207.x - O2 DE (Germany)
x.xx.401.x - World Wide English
x.xx.415.x - Arabic (UAE/Middle East)
x.xx.468.x - Turkey
x.xx.497.x - Morocco
x.xx.498.x - WWE Brightpoint US (United States)
x.xx.531.x - T-Mobile US (United Kingdom)
x.xx.666.x - Bell Canada
x.xx.707.x - Asia WWE (World Wide English)
x.xx.708.x - Asia HK (Hong Kong)
x.xx.709.x - Asia TW (Taiwan)
x.xx.720.x - Asia (India)
x.xx.728.x - Virgin AU (Australia)
x.xx.751.x - Chunghwa Telecom (Taiwan)
x.xx.771.x - Hutchison 3G UK (United Kingdom)
x.xx.841.x - Telsra WWE (World Wide English)
x.xx.862.x - Voda-Hutch AU (Australia)
x.xx.901.x - TIM IT (Italy)
x.xx.911.x - SK Telecom (South Korea)
x.xx.980.x - Optus AU (Australia)
x.xx.1400.x - HTC China
x.xx.1403.x - HTC China CMCC (China Mobile Communications Corporation)
x.xx.1540.x - HTC One U.S. Developer Edition
Thanks to mike1986 for this list
Fastboot & Platform Tool Guide
HELP FOR FLASH MORE FASTER WHEN YOU USE FASTBOOT LINE COMMAND
If you have got a problem with your adb or fastboot or recovery....it's very simply and faster
use this:
Download this zip file "Fastboot_files.zip" or this tool : platform-tools.zip - md5: 15e771613370afe3c70e0be1454d2ef1 - size: 346.8KB
Install this file somewhere in one folder which is named "fastboot" on your PC
=> disk C: root
Unzipped this file on the folder "fastboot" and you will find 3 files:
- adb.exe
- AdbWinApi.dll
- fastboot.exe
Click to expand...
Click to collapse
OR
Unzipped this file on the folder "platform-tools" and you will find 11 files:
- aapt
- adb
- AdbWinApi.dll
- AdbWinUsbApi.dll
- aidl
- dexdump
- llvm-rs-cc
- fastboot
- dx
- NOTICE
- source.properties
Click to expand...
Click to collapse
and when you need to push something by the bootloader, you can use it.
Don't forget to push on this folder the file that you need. For exemple: boot.img or a recovery.img, etc...
CD to where your fastboot or platform tools were installed
The line command is :
Code:
[B]C:\Users\R2D2>cd c:\platform-tools[/B]
Code:
[B]C:\platform-tools>fastboot flash recovery recovery.img[/B]
OR
Code:
[B]C:\Users\R2D2>cd c:\fastboot[/B]
Code:
[B]C:\fastboot>[/B]
Enter
Code:
[B]C:\fastboot>fastboot flash recovery recovery.img[/B]
Enter
If you want to flash the "recovery.img" file
******************************************************************
******************************************************************
If you want to know all lines of command
Code:
c:\fastboot>fastboot
Code:
usage: fastboot [ <option> ] <command>
commands:
update <filename> reflash device from update.zip
flashall flash boot + recovery + system
flash <partition> [ <filename> ] write a file to a flash partition
erase <partition> erase a flash partition
getvar <variable> display a bootloader variable
boot <kernel> [ <ramdisk> ] download and boot kernel
flash:raw boot <kernel> [ <ramdisk> ] create bootimage and flash it
devices list all connected devices
continue continue with autoboot
reboot reboot device normally
reboot-bootloader reboot device into bootloader
help show this help message
options:
-w erase userdata and cache
-s <serial number> specify device serial number
-p <product> specify product name
-c <cmdline> override kernel commandline
-i <vendor id> specify a custom USB vendor id
-b <base_addr> specify a custom kernel base address
-n <page size> specify the nand page size. default: 2048
OP and post 3 updated with some screenshots for a better help
I do that the same, but after flash Recovery i don't see “TAMPERED” so it's problem to root phone. Help me!
C:\platform-tools>fastboot.exe flash recovery recoverystock.img
sending 'recovery' (9562 KB)...
OKAY [ 1.208s]
writing 'recovery'...
OKAY [ 0.707s]
finished. total time: 1.919s
Flash successfull
phunghoang24 said:
I do that the same, but after flash Recovery i don't see “TAMPERED” so it's problem to root phone. Help me!
C:\platform-tools>fastboot.exe flash recovery recoverystock.img
sending 'recovery' (9562 KB)...
OKAY [ 1.208s]
writing 'recovery'...
OKAY [ 0.707s]
finished. total time: 1.919s
Flash successfull
Click to expand...
Click to collapse
It's not "C:\platform-tools>fastboot.exe flash recovery recoverystock.img
but it's : "C:\platform-tools>fastboot flash recovery recovery.img"
don't write the .exe for fastboot
try this and tell me
It's all working.
phunghoang24 said:
I do that the same, but after flash Recovery i don't see “TAMPERED” so it's problem to root phone. Help me!
Click to expand...
Click to collapse
Have you tried my previous post and is it okay for you now ?
I would like to know if users (apparently many- seen downloads) have encountered problems when using this tutorial.
Or do you think that it is good simply
philos64 said:
I would like to know if users (apparently many- seen downloads) have encountered problems when using this tutorial.
Or do you think that it is good simply
Click to expand...
Click to collapse
I have the same issue, it show:
after imput C:\platform-tools>fastboot flash recovery recoverystock.img
< waiting for device >
sending 'recovery' (9562 KB).
OKAY [ 1.203s]
writing 'recovery'...
OKAY [ 0.717s]
finished. total time: 1.921s
but I don't see “TAMPERED”:crying:
la_muerte said:
I have the same issue, it show:
after imput C:\platform-tools>fastboot flash recovery recoverystock.img
< waiting for device >
sending 'recovery' (9562 KB).
OKAY [ 1.203s]
writing 'recovery'...
OKAY [ 0.717s]
finished. total time: 1.921s
but I don't see “TAMPERED”:crying:
Click to expand...
Click to collapse
Reboot bootloader until u see tampered
Sent from my HTC One using xda premium
burton813 said:
Reboot bootloader until u see tampered
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
tried, no use
also flashed recovery couple times (tried: stock, CWM and TWRP), non of them work after reboot HBOOT, still cannot get into RECOVERY.
no TEMPERED on the screen:crying:
burton813 said:
Reboot bootloader until u see tampered
Click to expand...
Click to collapse
I will added asap for more clarify
[Edit] Added
Sent from my N7 3G with DroiDevs premium between sky and earth.
la_muerte said:
tried, no use
also flashed recovery couple times (tried: stock, CWM and TWRP), non of them work after reboot HBOOT, still cannot get into RECOVERY.
no TEMPERED on the screen:crying:
Click to expand...
Click to collapse
No, this process works because a lot of users have used it.
Are you unlocked ? You can see unlocked when you are bootloder.
Where are your recoverystock file .img ? normally in the platform tools or fastboot folder (look pics)
Can you explain what have you make ?
philos64 said:
No, this process works because a lot of users have used it.
Are you unlocked ? You can see unlocked when you are bootloder.
Where are your recoverystock file .img ? normally in the platform tools or fastboot folder (look pics)
Can you explain what have you make ?
Click to expand...
Click to collapse
Thanks for the help!
But I think I know why the RECOVERY won't work.
Because I have BRANDED htc one.
cid: H3G__106
H3G (3 Austria)
Code:
fastboot getvar version-main
version-main: 1.28.771.6
finished. total time: -0.000s
so I need to find the right version of STOCK RECOVERY IMAGE
1.28.771.6 - Hutchison 3G UK (United Kingdom)
and flash it first!
Just like the steps to unlock AT&T branded htc one.
la_muerte said:
Thanks for the help!
But I think I know why the RECOVERY won't work.
Because I have BRANDED htc one.
cid: H3G__106
H3G (3 Austria)
Code:
fastboot getvar version-main
version-main: 1.28.771.6
finished. total time: -0.000s
so I need to find the right version of STOCK RECOVERY IMAGE
1.28.771.6 - Hutchison 3G UK (United Kingdom)
and flash it first!
Just like the steps to unlock AT&T branded htc one.
Click to expand...
Click to collapse
Lol.. If it's branded by your carrier, I cannot do nothing for this part.
But you're Unlocked without problem ?
philos64 said:
...Are you unlocked ? You can see unlocked when you are bootloder.
...
Click to expand...
Click to collapse
Yes! I can see *** UNLOCKED *** on my bootloader screen, but just cannot get into Recovery Mode.
la_muerte said:
Yes! I can see *** UNLOCKED *** on my bootloader screen, but just cannot get into Recovery Mode.
Click to expand...
Click to collapse
If I find something about this problem with One Branded, I tell you
la_muerte said:
Yes! I can see *** UNLOCKED *** on my bootloader screen, but just cannot get into Recovery Mode.
Click to expand...
Click to collapse
follow this guide and install supeboot zip
http://www.ibtimes.co.uk/articles/4...-install-clockworkmod-recovery-android422.htm
then with hanson all in one flash CWR , done
la_muerte said:
Yes! I can see *** UNLOCKED *** on my bootloader screen, but just cannot get into Recovery Mode.
Click to expand...
Click to collapse
About the install of the recovery, you're UNLOCKED so you can flash a recovery even if you're branded by your carrier.
When you write your command lines which name write you for your recovery ?
Don't forget to write the same name as your recovery name in your your folder: Look screens of the OP
stesa said:
follow this guide and install supeboot zip
http://www.ibtimes.co.uk/articles/4...-install-clockworkmod-recovery-android422.htm
then with hanson all in one flash CWR , done
Click to expand...
Click to collapse
Why giving the link for a another guide to a another website, your post is completly useless.
Please respect all OP who writes guides for helping xda members !!!!!
Thanks
Related
Hello to all members of xda forum, my problem with my HTC DESIRE S is that I installed a ROM which may be unsuitable for my mobile, Because when I restart it, the screen remains blank with green logo "HTC". I reboot to fastboot mode it works, but when I chose the "recovery" option from fastboot menu, It didn't lead me to access clockmodwork recovery in order to uninstall the unsuitable "ROM", time after time, but in vain the screen turns white again!.
you dear members has to tell me what could I do, I really don't know what to do?
***additional info***
HTC DESIRE S
saga pvt ships s-off rl
hboot 6.98.1002
radio 3822.10.08.04_m
emmc-boot
you need to include more detail.which ruu did you try to install,what was the original version on the phone,what brand is the phone,what country did it come from. is the phone revolutionary s off ,xtc clipped or htc dev unlocked?much more info nobody can help you
Additional info 2
i was trying to install ruu is for htc sensation XL (gingerbread2.3.5) (sense 3.0)
revolitionary s-off
htc desire s (model s510e)/Gingerbread 2.3.3 (1.47.161.2)
france (SFR)
viadora13 said:
i was trying to install ruu is for htc sensation XL (gingerbread2.3.5) (sense 3.0)
revolitionary s-off
htc desire s (model s510e)/Gingerbread 2.3.3 (1.47.161.2)
france (SFR)
Click to expand...
Click to collapse
You actually tried to install the ruu for sensation xl onto the desire s!!!
You're a brave one man!!!
Beamed from the Dark Side using xda premium.
surely if you flashed a sensation xl RUU it wouldn't work and it certainly looks like it.
Here are a list of fastboot commands. You could try flashing a new ROM.
fastboot [ <option> ] <command>
commands:
update <filename> reflash device from update.zip
flashall 'flash boot' + 'flash system'
flash <partition> [ <filename> ] write a file to a flash partition
erase <partition> erase a flash partition
getvar <variable> display a bootloader variable
boot <kernel> [ <ramdisk> ] download and boot kernel
flash:raw boot <kernel> [ <ramdisk> ] create bootimage and flash it
devices list all connected devices
reboot reboot device normally
reboot-bootloader reboot device into bootloader
options:
-w erase userdata and cache
-s <serial number> specify device serial number
-p <product> specify product name
-c <cmdline> override kernel commandline
Click to expand...
Click to collapse
Just head for this thread
http://forum.xda-developers.com/showthread.php?t=1488672
HY, I'm finding the RRU pro HTC ONE S with CID TIM__401.
My phone is bricked in this situation,
*** TAMPERED ***
*** RELOCKED ***
VLE PUT SHIP S-ON RL
HBOOT-1.06.0000
RADIO-0.16.31501S.17_2
OpenDSP-v21.1.032.0314
eMMC-boot
Mar 15 2012, 23:37:23
FASTBOOT USB
<VOL UP> to previous item
<VOL DOWN> to next item
<POWER> to select item
BOOTLOADER
REBOOT
REBOOT BOOTLOADER
POWER DOWN
when I try to using fastboot command the response is:
fastboot flash recovery recovery.img
sending 'recovery' (5742 KB)... OKAY [ 1.040s]
writing 'recovery'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.490s
Help me please
Roberto
BOB0660 said:
HY, I'm finding the RRU pro HTC ONE S with CID TIM__401.
My phone is bricked in this situation,
*** TAMPERED ***
*** RELOCKED ***
VLE PUT SHIP S-ON RL
HBOOT-1.06.0000
RADIO-0.16.31501S.17_2
OpenDSP-v21.1.032.0314
eMMC-boot
Mar 15 2012, 23:37:23
FASTBOOT USB
<VOL UP> to previous item
<VOL DOWN> to next item
<POWER> to select item
BOOTLOADER
REBOOT
REBOOT BOOTLOADER
POWER DOWN
when I try to using fastboot command the response is:
fastboot flash recovery recovery.img
sending 'recovery' (5742 KB)... OKAY [ 1.040s]
writing 'recovery'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.490s
Help me please
Roberto
Click to expand...
Click to collapse
Well , first of all unlock your bootloader >>> says very clear there >>> *** TAMPERED *** then under that *** RELOCKED *** .
Once you unlocked it ... check this post here >> http://forum.xda-developers.com/showthread.php?t=1543588 and get a rom for your device .
From what says in your post , Mar 15 2012 and versions of HBOOT , Radio , etc ... my guess is that RUU_Ville_U_HTC_Europe_1.78.401.2_Radio_0.16.31501S.17_2_10.23.31501S would be fine for you .
I'm not sure if your CID will be a problem to write another recovery image so download that rom version and get from it what you need ( recovery , etc ) . Even so ... i think you should be able to flash TWRP 2.2.0 recovery and use a custom ROM ( TrickDroid 7.0 for example ) .
If need , you can also change your CID to Super CID ... this would alllow ya to write any rom ... check this post for more info >> http://forum.xda-developers.com/showthread.php?t=1671396 .
Yes CID would be a problem, i've changed it to HTC__001 to load the europe ruu...
(I had a tim branded one s too)
Not able to change CID
Alie360 said:
Yes CID would be a problem, i've changed it to HTC__001 to load the europe ruu...
(I had a tim branded one s too)
Click to expand...
Click to collapse
tanks for the info, but i'm not able to change the ID because my cell is not on line.
when i start ADB SHELL it respond ERROR: DEVICE NOT FOUND also some FASTBOOT command give me the same problem.
Sorry for my english
Roberto
BOB0660 said:
tanks for the info, but i'm not able to change the ID because my cell is not on line.
when i start ADB SHELL it respond ERROR: DEVICE NOT FOUND also some FASTBOOT command give me the same problem.
Sorry for my english
Roberto
Click to expand...
Click to collapse
ADB only works if phone is booted or booting and ADB is activated in settings on the phone, and in a custom recovery like CWM.
Fastboot only works in bootloader mode, when it says FASTBOOT just like when you first tried flashing that recovery.img. Test with
Code:
fastboot devices
Your command was correct but it failed because your bootloader was relocked like Equlibryum said. Try unlocking it again with
Code:
fastboot oem unlock
if it doesnt work you have to unlock again. I believe you can van reuse the Unlock_code.bin HTC emailed you the first time e.g.
Code:
fastboot flash unlocktoken Unlock_code.bin
Not sure if you have to be in any special mode to run the RUU, if memory serves me right either just at homescreen on booted phone or in bootloader.
Also you need only fastboot access to change CID.
To use adb you have to enable "debug usb" in developer options (opzioni sviluppatore->debug usb)
Then connect the phone to your pc (it must be on), open cmd and use the command
Code:
adb devices
to see if the phone is effectively connected
Also remember when you change CID you have to request another unlock_code from htcdev
ADB problem
Alie360 said:
To use adb you have to enable "debug usb" in developer options (opzioni sviluppatore->debug usb)
Then connect the phone to your pc (it must be on), open cmd and use the command
Code:
adb devices
to see if the phone is effectively connected
Also remember when you change CID you have to request another unlock_code from htcdev
Click to expand...
Click to collapse
ADB doesn't work, I'm not able to start my ONE S for setting debug usb
>adb devices
* daemon not running. starting it now *
* daemon started successfully *
List of devices attached
Thanks for helpme
Roberto
Then unlock the bootloader, flash a custom recovery and then a custom rom, i sugguest you trickdroid (stable and looks like the stock one).
If you are unconfortable using cmd you should use this: http://forum.xda-developers.com/showthread.php?t=1604677
After that your phone should boot fine.
Then if you want you can change your CID through adb and install the ruu or simply keep trickdroid.
PS: if you want to give thanks, hit the thanks button
also uncheck fastboot under settings/power on phone
and do you have all your drivers/files for fastboot/adb installed in your fastboot.exe folder
make sure you are in that folder in command window for fastboot commands to work and booted into fastboot on phone
as mentioned on adb just be booted in to phone OS
ONE S brick
rugmankc said:
also uncheck fastboot under settings/power on phone
and do you have all your drivers/files for fastboot/adb installed in your fastboot.exe folder
make sure you are in that folder in command window for fastboot commands to work and booted into fastboot on phone
as mentioned on adb just be booted in to phone OS
Click to expand...
Click to collapse
I can't uncheck fastboot under settings/power my phone start only in bootloader and don't go in recovery.
I'm not able to use the ADB or FASTBOOT command because the the device is NOT CONNECT, but the driver and the sofware are correctly installed. I think the only way for resolve in the correct RRU for TIM__401 but is impossible to find it.
bye
Roberto
BOB0660 said:
I can't uncheck fastboot under settings/power my phone start only in bootloader and don't go in recovery.
I'm not able to use the ADB or FASTBOOT command because the the device is NOT CONNECT, but the driver and the sofware are correctly installed. I think the only way for resolve in the correct RRU for TIM__401 but is impossible to find it.
bye
Roberto
Click to expand...
Click to collapse
I believe in order to change your CID you need ADB. got a classic chicken or egg situation here.
I believe the only way you could get this to work is to get fastboot to work. then you could unlock bootloader, and install recovery and rom as they said already. Sometimes you have to try your phone in a different usb port so windows will be forced to reinstall the drivers or you need to delete the drivers from device manager and try again
Can not DO SUPERCID
my htc one s was offical system till i OTA 4.1.1
now HBOOT:2.15 BASEBAND:1.11.50.05.28_10.27.50.08L CID:TIM__401
and UNLOCKED root
but ever I do the supercid the result often still TIM__401
I did cry even 10+
what can I do this?
who can give me some suggestion?
Doggydude said:
get fastboot to work. then you could unlock bootloader, and install recovery and rom as they said already.
Click to expand...
Click to collapse
This is your solution...forget the ruu.
HTC_One_S | S-OFF | Root_Box | Bubba_3.7b_SoftOV
Welcome
I have a problem with downgrade HBOOT. While I entered:
Code:
adb push zergRush /data/local/tmp
it shows:mode.
Code:
C:\a3>adb push zergRush /data/local/tmp
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: device not found
I can't turn on phone in normal mode. Could sb help me?
I assume you've installed correct drivers for your version of windows,
if so, first let ADB find your device, ....then undertake next steps...
What wersion of android is currently iinstalled on your phone?
If ics, then you should seek to gain root access different way
I've heard ICS has been patched against zerg rush exploit ( still double check it )
Edit: i know the question may appear foolish but:
Is your device - by any chance - already rooted?
I was trying to install Android 4.2.2 downloaded from: http://forum.xda-developers.com/showthread.php?t=2171105
I have install from sd: Rom and Gaps and after rebot it show black screen.
Code:
*** UNLOCKED ***
SAGA PUT SHIP S-ON RL
HBOOT-2.02.0002
RADIO-3831.19.00.110
roman_kaczynski said:
I was trying to install Android 4.2.2 downloaded from: http://forum.xda-developers.com/showthread.php?t=2171105
I have install from sd: Rom and Gaps and after rebot it show black screen.
Click to expand...
Click to collapse
If you're htc dev unlocked then you have to flash boot.img (from the rom zip you've just flashed)
1. adb devices
2.adb reboot bootloader
3.fastboot devices
4. Fastboot flash boot boot.img
1. adb devices
Code:
C:\a3>adb devices
List of devices attached
C:\a3>
2.adb reboot bootloader
Code:
C:\a3>adb reboot bootloader
error: device not found
C:\a3>
3.fastboot devices
Code:
C:\a3>fastboot devices
HT13JTJ30235 fastboot
C:\a3>
4. Fastboot flash boot boot.img
Code:
C:\a3>fastboot flash boot boot.img
sending 'boot' (3354 KB)...
OKAY [ 0.563s]
writing 'boot'...
OKAY [ 0.663s]
finished. total time: 1.231s
C:\a3>
What I shoud to do now?
roman_kaczynski said:
1. adb devices
Code:
C:\a3>adb devices
List of devices attached
C:\a3>
2.adb reboot bootloader
Code:
C:\a3>adb reboot bootloader
error: device not found
C:\a3>
3.fastboot devices
Code:
C:\a3>fastboot devices
HT13JTJ30235 fastboot
C:\a3>
4. Fastboot flash boot boot.img
Code:
C:\a3>fastboot flash boot boot.img
sending 'boot' (3354 KB)...
OKAY [ 0.563s]
writing 'boot'...
OKAY [ 0.663s]
finished. total time: 1.231s
C:\a3>
What I shoud to do now?
Click to expand...
Click to collapse
Reboot and enjoy
this marvelous rom
Edit: by the way, are you sure you've installed
proper adb drivers?
In this mode your phone doesn'seem to be visible...
Fastboot is showing your device though
Yes, it's working, but I can't google play and I have problems with bluetooth: "Unfortunately, Bluetooth Share has stopped".
roman_kaczynski said:
Yes, it's working, but I can't google play and I have problems with bluetooth: "Unfortunately, Bluetooth Share has stopped".
Click to expand...
Click to collapse
If you're comming from a different base (sense rom for example)
it is always better to perform full wipe (all except sd card)
before flashing new rom (and kernel-boot.img)
If that would not resolve your issues,
you should ask in jelly fire bean rom thread for further support
Ok, thanks. I have another question. If I would like to install older version of Android (4.1.*) what I should to do now?
roman_kaczynski said:
Ok, thanks. I have another question. If I would like to install older version of Android (4.1.*) what I should to do now?
Click to expand...
Click to collapse
You can flash- at will- everything you want(- except RUU)
as long as you flash boot. img along with the rom of your choice
(boot.img belonging to that rom naturally, or compatible with)
Do not forget about full wipe,...it often saves us from headache...
Ok, but if I'm turning on Bootloader Mode, I can't get to RECOVERY. It turning on to normal mode. I would like to try install Android 4.2.1 or 4.1.*, because screen dims while I'm moving to settings, etc. Second problem is that I haven't got keyboard on 4.2.2 :cyclops:
EDIT: Now all working fine. If I would like to install Android 4.1.* I should download ROM and Gaps and follow instructions? And at the end: Fastboot flash boot boot.img?
In principle, yes...
In every rom thread you'll find
detailed instructions- how to flash it ...
You must read more
Thank you very much for help.
Regards
Could I install RUU ROM from this: http://forum.xda-developers.com/showthread.php?t=695667 now?
roman_kaczynski said:
Could I install RUU ROM from this: http://forum.xda-developers.com/showthread.php?t=695667 now?
Click to expand...
Click to collapse
No, because those are for a different device.
If I find RUU official for HTC Desire with Android 4.0.4? It will be ok?
roman_kaczynski said:
If I find RUU official for HTC Desire with Android 4.0.4? It will be ok?
Click to expand...
Click to collapse
No, you need desire s (saga) ruu's. You run a huge risk in bricking your device if you try anything else
Sent from my Desire S using Tapatalk 2
I have installed ROM from this: http://forum.xda-developers.com/showthread.php?t=2006392 and I have flash boot.img after install.
After reboot I have black screen.
roman_kaczynski said:
I have installed ROM from this: http://forum.xda-developers.com/showthread.php?t=2006392 and I have flash boot.img after install.
After reboot I have black screen.
Click to expand...
Click to collapse
I've not flashed it so i could be wrong here but i think it's an odexed rom and needs a bit more than just flashing the ROM and kernel. Could you try ice cream saga whilst i have a read, won't be for an hour or two though
Sent from my Desire S using xda premium
so that ROM will not work on my phone? http://forum.xda-developers.com/showthread.php?t=2006392
It all started yesterday where i was trying to update (InsertCoin) which for some reason made my phone shut down mid-way through the installation process...
I had to reboot my phone back into recovery to wipe system/cache/data to reinstall...For some reason this wiped/damaged everything but the bootloader ofc.
(Bye go all my pictures, whatsapp conversations etc...)
This made me not being able to boot into my recovery aswell
I still can't get back into my recovery, and i've tried flashing the recovery over and over again via fastboot flash recovery twrp.img
When i try to flash the recovery, it succeeds but when i try to boot into it, it blinks the splash screen with odd intervals, i dont know if this means that its trying over and over again...I'm sort of desperate here...any help?
sidenote here: I'm in linux
you should've updated firmware to hboot 2.22 needed for IC, then you need to install the latest recovery 2.7.1.1 from twrp website
twrp here: http://techerrata.com/browse/twrp2/m4ul
new firmware here :http://forum.xda-developers.com/showthread.php?t=2759131
I have not updated it, will go and do that now,
Code:
[email protected]:/media/leon/*censor*/Android/ROMS/Millium$ sudo fastboot flash zip firmware.zip
[sudo] password for leon:
target reported max download size of 800227328 bytes
sending 'zip' (19549 KB)...
OKAY [ 2.466s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) Read zipped android_info fail
FAILED (remote: 99 unknown fail)
finished. total time: 4.305s
Right.....!?
I really don't want to reboot to bootloader at the moment...since the update failed...
Apparently i am S-ON and therefor need to obtain s-off, but i don't have an android system installed..how
s-off required to flash firmware or if s-on, bootloader needs to be re-locked, sorry i assumed you knew that! maybe create a signature giving details of your device for future, it does help.
If you are S-ON ---> Re-lock your bootloader (this will most probably wipe content of your device)
If you are S-OFF ---> no need to re-lock the bootloader.
Copy downloaded .zip to fastboot.exe location (e.g. c:/SDK/platform-tools/fastboot.exe)
Re-name .zip file to firmware.zip
Open command prompt
Boot your device in fastboot mode (vol down + power ===> fastboot)
Connect device to the PC
In command prompt cd to fastboot.exe location
Make sure you have correct modeid and cidnum (type: fastboot getvar all)
Type: fastboot oem lock (if your device is not relocked yet or in case it's S-ON)
Type: fastboot oem rebootRUU and wait for device to reboot
Type: fastboot flash zip firmware.zip and wait for process to complete
Sometimes flashing for the first time doesn't work, so flash firmware.zip again just to make sure.
Type: fastboot flash zip firmware.zip and wait for process to complete
Type: fastboot reboot
Unlock your bootloader and flash custom recovery if you are going to use custom ROM.
Code:
FAILED (remote: 12 signature verify fail)
This ahappens when flashing the firmware
*edit: I have fixed that, but i cannot flash the 2.22 included y you because it has a different modelid, presumably because my m4 isn't the at&t variant.
Will this work?
`leon said:
Code:
FAILED (remote: 12 signature verify fail)
This ahappens when flashing the firmware
Click to expand...
Click to collapse
not work ?? ok, then you will need to s-off the device, unlock first,you need SUPERCID also
Braddison said:
not work ?? ok, then you will need to s-off the device, unlock first
Click to expand...
Click to collapse
It did, sorry, didnt edit the post quick enough
`leon said:
Code:
FAILED (remote: 12 signature verify fail)
*edit: I have fixed that, but i cannot flash the 2.22 included y you because it has a different modelid, presumably because my m4 isn't the at&t variant.
Will this work?
Click to expand...
Click to collapse
no that firmware will not update everything that is required, use the firmware zip in the link i gave previously.
you need to change your cid to supercid,,,,very simple to do
Enter the command "fastboot oem readcid". Make a note of your original CID.
enter the command "fastboot oem writecid 11111111" make sure it is 8 ones (1)
enter the command "fastboot read cid" [it should confirm your CID is 11111111]
Braddison said:
no that firmware will not update everything that is required, use the firmware zip in the link i gave previously.
you need to change your cid to supercid,,,,very simple to do
Enter the command "fastboot oem readcid". Make a note of your original CID.
enter the command "fastboot oem writecid 11111111" make sure it is 8 ones (1)
enter the command "fastboot read cid" [it should confirm your CID is 11111111]
Click to expand...
Click to collapse
Yeah, i just tried that 5 minutes ago, though...:
Code:
(bootloader) [JAVACARD_ERR] SD/USBDISK Init error
Gosh...my device doesn't like me..
oh, wait, don't i have to unlock bootloader?
i'll try that now
OMG IM IN RECOVERY
cant seem to do anything with my data partition, same goes for internal storage
well you've done everything that i done when i tried out Insertcoin rom for a few days and never had any of your issues. so not sure whats going on.
- unlocked bootloader
- get s-off
- get supercid
- update firmware
- get latest twrp recoverry
- install Insert Coin
use the fix miniwhooper posted on her firmware thread ....Flash stock recovery and factory reset from boot loader. It will fix you /data partition.. then flash custom recovery and it should be fixed
`leon said:
Yeah, i just tried that 5 minutes ago, though...:
Code:
(bootloader) [JAVACARD_ERR] SD/USBDISK Init error
Gosh...my device doesn't like me..
oh, wait, don't i have to unlock bootloader?
i'll try that now
OMG IM IN RECOVERY
cant seem to do anything with my data partition, same goes for internal storage
Click to expand...
Click to collapse
Make sure you are in the folder your rom zip is located.
Run the command...
adb push filename.zip /sdcard
Wait around 10 minutes as it will not give you progress
go back to TWRP main page and install, choose SDcard and the zip file you just uploaded should be there.
hello @AnGrY sCoTsMaN
i have the exact same problem but i flashed cm.12.1 cant boot in recovery or flash anything using adb
hboot os 2.22 it says unlocked but it seems not
can you please help me out
Edit: problem solved without doing anything
HBOOT 2.16 Installation guide
Requirements before installing
Back up your files, your SD Card will be WIPED!
Charge your phone to AT LEAST 30%
Your bootloader MUST be unlocked
You NEED to be S-OFF or else it won't work
You need basic knowledge of Fastboot commands
Windows 10/8/7/Vista/XP: You need drivers installed
Windows 8.1: You need drivers installed AND update kb2967917 from Microsoft
Linux: You need "51-android.rules" or "99-android.rules" configured
Mac: Nothing needed that I know of
I am NOT responsible if you break your phone
This guide will be from a Windows point of view
Installation Guide
Download the HBOOT 2.16 firmware file from here: Download from Mega.co.nz
Place it in your adb and fastboot folder. For example C:\Users\(Your Username)\Fastboot
Now open a Command Prompt window and then type in:
Code:
cd C:\(Location of your Fastboot folder)
Now take your phone and connect it to your computer (with USB Debugging ON) and type in:
Code:
adb reboot bootloader
Once you are in the bootloader and it displays "Fastboot USB", type in:
Code:
fastboot oem rebootRUU
Once your computer recognizes your phone type in:
Code:
fastboot flash zip Firmware_4.06.401.1.zip
If you changed the file name make sure to type in the name of it instead of the one above
You will then get an error:
Code:
"FAILED (remote: 90 hboot pre-update! please flush image again immediately)"
Don't worry, this is normal. DO NOT unplug your phone. Simply type in once again:
Code:
fastboot flash zip Firmware_4.06.401.1.zip
If you changed the file name make sure to type in the name of it instead of the one above
Then wait until the Command window says "finished" and type in:
Code:
fastboot reboot-bootloader
Next we need to download TWRP recovery. You can download it from MDMower's website and MAKE SURE to get TWRP for "/data/media storage (HBOOT 2.16.0000)" and TWRP 2.8.0.1 or above.
Now we must go back to the command window with your phone still plugged in displaying "Fastboot USB" on the screen
Then we type:
Code:
cd C:\Users\(Your Username)\Downloads
or if the TWRP Recovery file isn't in the above location just direct it to the folder its stored in
Now we type:
Code:
fastboot flash recovery twrp-2.8.x.x-ville-dm.img
just replace the "x" with the numbers on the file. e.g. - 2.8.0.1
Once it flashed successfully press the power button and use the volume buttons to scroll down to recovery and to boot into it, simply press the power button
Now go into "Mounts" and select Enable MTP if it isn't already.
Now copy a ROM of your choice (That supports HBOOT 2.16) and flash it. If MTP doesn't work, simply sideload the ROM
That's it, now you just reboot after installing your ROM.
Hope this helps anybody having difficulty with HBOOT 2.16
Getting a different error when flashing.
c:\adb>fastboot flash zip Firmware_4.06.401.1.zip
sending 'zip' (46472 KB)...
OKAY [ 2.598s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
FAILED (remote: 42 custom id check fail)
finished. total time: 4.304s
urlyisis said:
Getting a different error when flashing.
c:\adb>fastboot flash zip Firmware_4.06.401.1.zip
sending 'zip' (46472 KB)...
OKAY [ 2.598s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
FAILED (remote: 42 custom id check fail)
finished. total time: 4.304s
Click to expand...
Click to collapse
You need to change your cid
To change it go into bootloader, then fastboot, connect it to your computer and type
Code:
fastboot oem writecid 11111111
that is eight 1s
If that didnt work then type instead
Code:
fastboot oem writecid HTC__001
that is 2 underscores after HTC
I get this:
Code:
Z:\One_S_All-In-One_Kit_v1.1\Data>fastboot flash zip Firmware_4.06.401.1.zip
sending 'zip' (46472 KB)... OKAY [ 6.507s]
writing 'zip'... INFOzip header checking...
INFOzip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 8.020s
No matter how often I attempt it. Redownloaded the zip to make sure it is not corrupt...
Any pointer?
Ah, damn, because I followed the instructions to the end despite the HBOOT not flashing I can also now not access recovery anymore. It seems the new version of recovery was properly flashed, but as it relies on higher HBOOT I can't get into it anymore. It is still in HBOOT 1.03.
Can anyone help me to get this phone ready for Cyanogenmod?
I was able to load the hboot, but now the bootloader is locked again and I can't flash the recovery.
FAILED (remote: not allowed)
Walter_White said:
I get this:
Code:
Z:\One_S_All-In-One_Kit_v1.1\Data>fastboot flash zip Firmware_4.06.401.1.zip
sending 'zip' (46472 KB)... OKAY [ 6.507s]
writing 'zip'... INFOzip header checking...
INFOzip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 8.020s
No matter how often I attempt it. Redownloaded the zip to make sure it is not corrupt...
Any pointer?
Ah, damn, because I followed the instructions to the end despite the HBOOT not flashing I can also now not access recovery anymore. It seems the new version of recovery was properly flashed, but as it relies on higher HBOOT I can't get into it anymore. It is still in HBOOT 1.03.
Can anyone help me to get this phone ready for Cyanogenmod?
Click to expand...
Click to collapse
Get s-off change your cid to HTC__001 as shown above and run this ruu, then follow the instructions above
urlyisis said:
I was able to load the hboot, but now the bootloader is locked again and I can't flash the recovery.
FAILED (remote: not allowed)
Click to expand...
Click to collapse
It looks like your s-on
UPDATE: I had to unlock the bootloader via the HTC unlock. RESOLVED
dd98 said:
It looks like your s-on
Click to expand...
Click to collapse
Actually, the bootloader shows the following.
***** Tampered ******
Locked
VLE PVT SHIP S-OFF RL
CID-HTC__001
HBOOT-2.16.000
dd98 said:
HBOOT 2.16 Installation guide
Requirements before installing
Back up your files, your SD Card will be WIPED!
Charge your phone to AT LEAST 30%
Your bootloader MUST be unlocked
You NEED to be S-OFF or else it won't work
You need basic knowledge of Fastboot commands
Windows 10/8/7/Vista/XP: You need drivers installed
Windows 8.1: You need drivers installed AND update kb2967917 from Microsoft
Linux: You need "51-android.rules" or "99-android.rules" configured
Mac: Nothing needed that I know of
I am NOT responsible if you break your phone
This guide will be from a Windows point of view
Installation Guide
Download the HBOOT 2.16 firmware file from here: Download from Mega.co.nz
Place it in your adb and fastboot folder. For example C:\Users\(Your Username)\Fastboot
Now open a Command Prompt window and then type in:
Code:
cd C:\(Location of your Fastboot folder)
Now take your phone and connect it to your computer (with USB Debugging ON) and type in:
Code:
adb reboot bootloader
Once you are in the bootloader and it displays "Fastboot USB", type in:
Code:
fastboot oem rebootRUU
Once your computer recognizes your phone type in:
Code:
fastboot flash zip Firmware_4.06.401.1.zip
If you changed the file name make sure to type in the name of it instead of the one above
You will then get an error:
Code:
"FAILED (remote: 90 hboot pre-update! please flush image again immediately)"
Don't worry, this is normal. DO NOT unplug your phone. Simply type in once again:
Code:
fastboot flash zip Firmware_4.06.401.1.zip
If you changed the file name make sure to type in the name of it instead of the one above
Then wait until the Command window says "finished" and type in:
Code:
fastboot reboot-bootloader
Next we need to download TWRP recovery. You can download it from MDMower's website and MAKE SURE to get TWRP for "/data/media storage (HBOOT 2.16.0000)" and TWRP 2.8.0.1 or above.
Now we must go back to the command window with your phone still plugged in displaying "Fastboot USB" on the screen
Then we type:
Code:
cd C:\Users\(Your Username)\Downloads
or if the TWRP Recovery file isn't in the above location just direct it to the folder its stored in
Now we type:
Code:
fastboot flash recovery twrp-2.8.x.x-ville-dm.img
just replace the "x" with the numbers on the file. e.g. - 2.8.0.1
Once it flashed successfully press the power button and use the volume buttons to scroll down to recovery and to boot into it, simply press the power button
Now go into "Mounts" and select Enable MTP if it isn't already.
Now copy a ROM of your choice (That supports HBOOT 2.16) and flash it. If MTP doesn't work, simply sideload the ROM
That's it, now you just reboot after installing your ROM.
Hope this helps anybody having difficulty with HBOOT 2.16
Click to expand...
Click to collapse
Whatever which recover i choose, my internal storage was always 48mb, i can not push rom, can not sideload rom,
ad346544521 said:
Whatever which recover i choose, my internal storage was always 48mb, i can not push rom, can not sideload rom,
Click to expand...
Click to collapse
You need the hboot 2.16 specific recovery, you can download it here
Never mind, I found what I needed...
Hi, do you have the firmware for t-mobile to downgrade to 2.15? I tried https://mega.co.nz/#!s54F3YqK!QrNjMlieIG65jsaGWS8eXDdLc5FcYM7IEmqTk_pHbFA but doesnt work. I think because is not for tmobile. I cant downloade the full RUU because the download always fails and my internet is so slow.
EDIT: I dont need it anymore, a friend download the file for me. Just a question. in hboot 2.16, gave me more space for my data, i like that, there is no way to make old roms to work on hboot 2.16?
Cannot get this method to work. I'm unlocked and S-OFF. But whenever I try to flash the firmware*.zip I get the message
FAILED (remote: not allowed)
I'm about ready to give up on HBoot 2.16.
confused on twrp for hboot 2.16
Hi thanks a lot for this very clear tuto that help me successfully upgrade to hboot 2.16 without any error issue. everything followed attentively and step by step .
However i am a littlee confused at the step bellow.
When i reached the download section of specified url , concerning TWRP , there is only twrp 2.7 concerning hboot 2.16
But in the tuto you talk about twrp 2.8.. or above. So please can you clarify me on this ?
Thanks
dd98 said:
HBOOT 2.16 Installation guide
[*]Next we need to download TWRP recovery. You can download it from ......and MAKE SURE to get TWRP for "/data/media storage (HBOOT 2.16.0000)" and TWRP 2.8.0.1 or above.
Click to expand...
Click to collapse
delacosta4526 said:
Hi thanks a lot for this very clear tuto that help me successfully upgrade to hboot 2.16 without any error issue. everything followed attentively and step by step .
However i am a littlee confused at the step bellow.
When i reached the download section of specified url , concerning TWRP , there is only twrp 2.7 concerning hboot 2.16
But in the tuto you talk about twrp 2.8.. or above. So please can you clarify me on this ?
Thanks
Click to expand...
Click to collapse
Sorry, this is an old tutorial. Go to this link, download the latest file and flash it in fastboot mode by typing: fastboot flash recovery twrp-2.8.x.x.img (or whatever the file name is)
thanks..but
dd98 said:
Sorry, this is an old tutorial. Go to link, download the latest file and flash it in fastboot mode by typing: fastboot flash recovery twrp-2.8.x.x.img (or whatever the file name is)
Click to expand...
Click to collapse
thanks that is what i did.
But i though this would have help fix wifi, bluetooth not working since stock rom before i flash with "LIBERTY ROM - The Sixth Element" (that did not fix the problem)
Did you anything that can help ? My phone is Htc one s (actually : hboot 2.16 , TWRP 2.8.0.5, radio 1.20, unlocked, s-off, rooted, and with LIBERTY ROM - The Sixth Element" .
delacosta4526 said:
thanks that is what i did.
But i though this would have help fix wifi, bluetooth not working since stock rom before i flash with "LIBERTY ROM - The Sixth Element" (that did not fix the problem)
Did you anything that can help ? My phone is Htc one s (actually : hboot 2.16 , TWRP 2.8.0.5, radio 1.20, unlocked, s-off, rooted, and with LIBERTY ROM - The Sixth Element" .
Click to expand...
Click to collapse
No the recovery version will NEVER affect anything that does/doesn't work on the rom. Since you are using Liberty rom, make sure you are using the 4.4.2 version because the 4.4.3 version is very buggy
of course
dd98 said:
No the recovery version will NEVER affect anything that does/doesn't work on the rom. Since you are using Liberty rom, make sure you are using the 4.4.2 version because the 4.4.3 version is very buggy
Click to expand...
Click to collapse
Yes surely . i am using 4.4.2. I have carefully read i lot of things including that.
Thanks
Guys can someone please help me?
I am on Windows 10 desperately trying to find a solution on the ''WAITING DEVICE'' response after I type
fastboot oem rebootRUU
I have tried installing a bunch of drivers , driver updates on device manager etc with no luck.
The device is just not responding.
Thanks
File Offline
Unfortunately the HBoot 2.16 file is offline. Can someone please reupload it?
Thank you!