[RECOVERY][GT-I9105/P]CWM 6.0.3.1 Full touch with internal and external sd support - Samsung Galaxy S II Plus

Today I made a CWM recovery for GT-I9105P / GT-I9105 on request from Panda00
he tested it and is working fine.
here is procedure
Recovery version CWM 6.0.3.1
Download CWM_s2vep_k2wl.tar
go in download mode vol down + home + power button then click vol up. Connect phone with PC
flash it with odinv3 (just google for odin3 3.04 & make sure u have proper drivers installed then click on PDA tab select the CWM_s2vep_k2wl.tar then click start.)
phone will reboot.
Got to cwm by vol up + home + power button
kindly leave feedback.
as always " I AM NOT RESPONSIBLE FOR ANY BRICKS"

reserved#1

reserved#2

k2wl said:
reserved#1
Click to expand...
Click to collapse
make for i9105 too
Sent from my GT-I9105 using Tapatalk 2

yashuperia said:
make for i9105 too
Sent from my GT-I9105 using Tapatalk 2
Click to expand...
Click to collapse
it will mostly work on i9105 .. u have to try it... i dont own the device.
if u give me stock recovery i will make it... if above one does not work for u.

N/A.

panda00 said:
k2wl... Remember the kitchen compatibility file you made for us? It also worked with i9105 users. Which means... that the mount points are the same... therefore CWM should work.
Click to expand...
Click to collapse
ya i think so but i will not change the thread name unless and untill somebody test it . report it to be working ok.

N/A.

panda00 said:
Has anyone with an I9105 tested this yet. Need to confirm that it works with Non-P.
Click to expand...
Click to collapse
I can confirm it only when my phone will arrive tuesday, but i'll try it.

Where do I need to put the .tar file ?
And can I use Odin 3.07 too ?

warface123 said:
Where do I need to put the .tar file ?
And can I use Odin 3.07 too ?
Click to expand...
Click to collapse
ya u can use odin 3.07 . just put it in pda tab.

does this work on all I9105P firmware or do we have to flash some specific firmware first to flash this?

danyal241 said:
does this work on all I9105P firmware or do we have to flash some specific firmware first to flash this?
Click to expand...
Click to collapse
will work on all firmwares...

.
k2wl said:
ya i think so but i will not change the thread name unless and untill somebody test it . report it to be working ok.
Click to expand...
Click to collapse
yup..it works thanks

<ID:0/016> Added!!
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> SetupConnection..
<ID:0/016> Initialzation..
<ID:0/016> Get PIT for mapping..
then stuck
any help?

check ur drivers and close any kies programs running in background

works well thank you

k2wl said:
check ur drivers and close any kies programs running in background
Click to expand...
Click to collapse
rooted, thanks you're the man!!!!!
Sent from my GT-I9105P using xda premium

Not working man..at allllll

omarfaieq007 said:
Not working man..at allllll
Click to expand...
Click to collapse
I'm sorry but... you are wrong.
Please give us more info 'bout your method 'cause this cwm works.
cheers

Related

HELP! Odin to T959VUVKAB

Ok, so I attempted to Odin back to the leaked stock KAB file using the leaked PIT for the Vibrant 4g.
Everything seemed to work fine on the Odin side of the house, but now my phone only boots into recovery. Any help.
I am using Odin 1.81
The PIT uploaded by krylon360
The leaked T959VUVKAB tar
I placed the TAR in the PDA section of Odin
Any help is greatly appreciated.
If your rooted you can adb push a launcher on it.
Sent From My Galaxy S 4G
MvP77 said:
If your rooted you can adb push a launcher on it.
Sent From My Galaxy S 4G
Click to expand...
Click to collapse
Thank, but I went ahead and Odin'd back to the KAB build.
MvP77 said:
If your rooted you can adb push a launcher on it.
Sent From My Galaxy S 4G
Click to expand...
Click to collapse
My USB Debugging was off, so i couldnt do that
where did you download these files troby1986 ?
Ssgvendetta said:
where did you download these files troby1986 ?
Click to expand...
Click to collapse
krylon360 from Team Whiskey has the PIT posted on this site, and the TAR can be found at samfirmware.com
troby could you list exactly the steps you took? im having same problem, stuck in recovery
troby1986 said:
krylon360 from Team Whiskey has the PIT posted on this site, and the TAR can be found at samfirmware.com
Click to expand...
Click to collapse
where he post pit file can i have link please or pit file my phone was dead i repaired with jtag but now need flash with re-partition
B.R
troby1986 said:
Ok, so I attempted to Odin back to the leaked stock KAB file using the leaked PIT for the Vibrant 4g.
Everything seemed to work fine on the Odin side of the house, but now my phone only boots into recovery. Any help.
I am using Odin 1.81
The PIT uploaded by krylon360
The leaked T959VUVKAB tar
I placed the TAR in the PDA section of Odin
Any help is greatly appreciated.
Click to expand...
Click to collapse
If you searched the dev section that PIT doesn't work and will brick your phone like it did mine. I had to get my phone replaced. Even Krylon said not to use it in one of a couple threads in here. There are plenty of warnings in the DEV section saying not to use any PIT files.
How can I put this...
DO NOT USE PIT! DO NOT USE PIT! DO NOT USE PIT!
That is all.
Sent from my SGH-T959V using XDA App
http://forum.xda-developers.com/showpost.php?p=12747892&postcount=234

[I9003] XXKPH + XXKPE Gingerbread Rooted [GUIDE]

Good News Guys
At last I have Rooted The [I9003] XXKPE Gingerbread Firmware
Updated Guide :
XXKPH
1.) After Flashing to new Firmware , Go to Downloading Mode By pressing volume down + menu button + power button and Flash the Phone Using the PDA file of the [I9003][CWM] ClockworkMod Recovery porting for I9003
(GT-I9003_PDA-XXKPE-fixed.tar)
GT-I9003_PDA-XXKPE-fixed.tar
2.) Root USing SOC
3.) flash PDA with the normalboot.img.tar attached below
http://forum.xda-developers.com/showpost.php?p=16737945&postcount=146
Enjoy !!!
XXKPE
Guide For Rooting
Note:Before rooting, make sure your Samsung I9003 Driver is already installed if not you will stuck up at "Waiting for device"
1.) After Flashing (2 times [unknown CSC problem]) To the New ROM (XXKPE) Go to Downloading Mode By pressing volume down + menu button + power button and Flash the Phone Using the PDA file of the [I9003][CWM] ClockworkMod Recovery porting for I9003
(GT-I9003_PDA-XXKPE-fixed.tar)
GT-I9003_PDA-XXKPE-fixed.tar
2.) Now You Can Root The Phone Using Any SuperOneClick (kernel panic occurs like in KP9 & kp7 - no problem)
(I Used SuperOneClickv2.0b1-ShortFuse)
NOTE: After rooting, you wont have busybox, so if you require commands like cp, download busybox installer from market and install busybox.
Great work. Will try tomorrow.. Lets wait for feedbacks about this..
Sent from my GT-I9003 using XDA Premium App
Isn't this the same thing as that chinese guy said? Wifi works? Connecting is one thing, Actual loading of a page is another
where is normalboot.img.tar ?
Misledz said:
Isn't this the same thing as that chinese guy said? Wifi works? Connecting is one thing, Actual loading of a page is another
Click to expand...
Click to collapse
I think so part.. Only this is more detailed and understandable
Sent from my GT-I9003 using XDA Premium App
vivekkalady said:
This Is the Most Important Step
3.) Now go back to the downloading Mode (volume down + menu button + power button) and flash the PDA file I am Attaching
normalboot.img.tar
Click to expand...
Click to collapse
You didn't attack this file. Is the one included in the original PDA file of the firmware?
kishen80 said:
where is normalboot.img.tar ?
Click to expand...
Click to collapse
I think the normalboit.img.tar he means is the cwm..
Sent from my GT-I9003 using XDA Premium App
amarisi said:
You didn't attack this file. Is the one included in the original PDA file of the firmware?
Click to expand...
Click to collapse
yes but you cant install the file directly
that's why i created this version of file
anyway it works Fine
That's what we all Want
ephraim033 said:
I think the normalboit.img.tar he means is the cwm..
Sent from my GT-I9003 using XDA Premium App
Click to expand...
Click to collapse
No dude
I have attached the file
First the attachment failed
now i have uploaded the file correctly
Check the first post
vivekkalady said:
yes but you cant install the file directly
that's why i created this version of file
anyway it works Fine
That's what we all Want
Click to expand...
Click to collapse
Thank you, just flashed. Gonna check if it worked well.
EDIT: it works flawlessly. Thank you again.
amarisi said:
You didn't attack this file. Is the one included in the original PDA file of the firmware?
Click to expand...
Click to collapse
iLol'd ATTAACKKK!!!
Srs Note: It's on Skin's page if anyone is curious the KP9 Release
vivek good job bro...thanks all working now
Will link this to my thread
Sent from my GT-I9003 using XDA Premium App
now wifi it ok
thanks
root ok
wifi ok
superuser ok
Do i need to flash twice before flashing the GT-I9003_PDA-GB-KP9- UPDATED.tar?
Yeap, It works! .Good Job Viv! The net is alive!
vivekkalady said:
Good News Guys
At last I have Rooted The [I9003] XXKPE Gingerbread Firmware
Guide For Rooting
1.) After Flashing To the New ROM (XXKPE) Go to Downloading Mode By pressing volume down + menu button + power button and Flash the Phone Using the PDA file of the [I9003][CWM] ClockworkMod Recovery porting for I9003
(GT-I9003_PDA-GB-KP9- UPDATED.tar)
GT-I9003_PDA-GB-KP9- UPDATED.tar
2.) Now You Can Root The Phone Using Any SuperOneClick
(I Used SuperOneClickv2.0b1-ShortFuse)
(Check Your Wifi It will Not Work)
This Is the Most Important Step
3.) Now go back to the downloading Mode (volume down + menu button + power button) and flash the PDA file I am Attaching
normalboot.img.tar
By doing This Step you will get the Wifi And Everything You have lost by flashing to the first file for CWT
I am attaching the Screenshot of My phone
Click to expand...
Click to collapse
good job dude..! tnx..!ill try this tomorrow..
it proves that there is nothing in android that we cant hack...!!!
christopher2018 said:
Do i need to flash twice before flashing the GT-I9003_PDA-GB-KP9- UPDATED.tar?
Click to expand...
Click to collapse
Thats up to You dude
Because If your camera and your CSC (*#1234#) is working fine then you dont have to flash twice
(I have to flash twice for my CSC to be valid. first t was showing unknown)
This method is just for rooting (this doesnt depend on how many times you flash)
WOOOOOOHO
at last after reading lots of lots(all gb updates) pages,
vivek just u make me to flash my phone to GB
thanks i will share result currently i am downloading

Odin fails at modem.bin

i have a galaxy S whic i bricked. im trying to flash a ROM using Odin. it all goes fine until the modem.bin which fails.. neeed urgent help
XxRubikxX said:
i have a galaxy S whic i bricked. im trying to flash a ROM using Odin. it all goes fine until the modem.bin which fails.. neeed urgent help
Click to expand...
Click to collapse
I've had this problem b4, if u were using adb earlier open up task manager and fc it. Also if u have more than one flashing program (odin, heimdall, one click, gremlin remover...etc) close all but the one you are trying to flash with then restart download mode.
XxRubikxX said:
i have a galaxy S whic i bricked. im trying to flash a ROM using Odin. it all goes fine until the modem.bin which fails.. neeed urgent help
Click to expand...
Click to collapse
Pull out your phone's battery and check whether it says SGH-T959V in the sticker under the battery.
I've had this problem b4, if u were using adb earlier open up task manager and fc it. Also if u have more than one flashing program (odin, heimdall, one click, gremlin remover...etc) close all but the one you are trying to flash with then restart download mode.
Click to expand...
Click to collapse
It didnt work for me.. i FCed adb, closed everything but this forum page n Odin still fail at modem.bin
my device is SGH-T959V.
What Rom are you trying to flash? What version of Odin are you using? Have you used my 1 click gremlin remove?
Sent from my SGH-I727 using xda app-developers app
What Rom are you trying to flash? What version of Odin are you using? Have you used my 1 click gremlin remove?
Sent from my SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Im trying to flash back to factory ROM. my Odin version is 3 v1.85. and gremlin remove i have yet to try after Odin i went heimdall but that wudnt detect my phone in download mode.
thomas.raines said:
What Rom are you trying to flash? What version of Odin are you using? Have you used my 1 click gremlin remove?
Sent from my SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Tried your gremlin remover.
fails at data.rfs

Flash Kit (Odin + Drivers + PIT)

Just made ​​a pack that includes everything you need to flash a firmware, everything in its latest version .
Includes:good::
Odin3 v3.07
Drivers v1.5.16.0
PIT for all models and variants
DOWNLOAD :victory:
I have already uploaded such a pack long time back.. It's in my odin guide.
Sent from my GT-I9070 using xda premium
Lol I've seen, this includes the new Odin, drivers, and PIT for NFC version.
Sorry for my bad English hahaha
juan77_sonic said:
Lol I've seen, this includes the new Odin, drivers, and PIT for NFC version.
Sorry for my bad English hahaha
Click to expand...
Click to collapse
New as in?
Also please stop providing the pit files. Many people use wron files and mess the device!
Odin gets the pit mapping from the device itself.!
Sent from my GT-I9070 using xda premium
Shaaan said:
New as in?
Also please stop providing the pit files. Many people use wron files and mess the device!
Odin gets the pit mapping from the device itself.!
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
The new version has MD5 Check, avoids many problems we have with previous versions.
A PIT files will change the names to avoid confusion, no need to use them.
Greetings!
Thanks
By post, because now I'll put a kernel on my Galaxy Pocket
-Sampaio said:
Thanks
By post, because now I'll put a kernel on my Galaxy Pocket
Click to expand...
Click to collapse
Aaah, what?!
It is really useful for me now. I tried to port rom and there was Internal Storage error and so I tried to format Internal SD card with Terminal Emulator and reboot. Then my phone can't boot,can't got into recovery mode. I tried to flash JB via Odin and failed with showing "Pit file not found". So I used these Pit files and flashed that only. Now,it is OK. Thanks
Don't work download
astrolince said:
Just made ​​a pack that includes everything you need to flash a firmware, everything in its latest version .
Includes:good::
Odin3 v3.07
Drivers v1.5.16.0
PIT for all models and variants
DOWNLOAD :victory:
Click to expand...
Click to collapse
The link does not work, you have another?

[Q] Softbrick?

Hello guys, I have a big problem.
3 weeks ago I had Ressurection Remix custom rom as daily driver.
Everything is alright, even if it won*t wake up sometimes, it's okay too.
I visit everyday the xda forum and look for news and updates for my device GT-I9105P.
I saw a updated version of AOSB custom rom to version 1.3.5 and downloaded it.
Boot to CWM 6.0.4.5 and wiped data and cache and installed AOSB 1.3.5.
After I hit reboot it stucks on the bootscreen. I wait over 10 minutes.
Since I stuck on this bootscreen I can't install any other rom and can't even restore my backup.
They all stuck at the bootscreen. Tried the Original stock rom via odin and it's the same, it won't boot.
I realised by the original rom there are the samsung boot sound and i heard that the sound won't play till the end.
What I don't understand, I can install CyanogenMod it works not 100%.
I can't download anything. If I want to download Apps or update them, the error google playstore has stoped apear.
After that I can't open Playstore again. It closes imediately after I hit the icon with the same error.
I can't even download from the Browser. If I download via browser it says the download managar has stoped.
If I connect my device with my laptop I can see the Internal Storage and the SD card BUT: The Internal Storage is empty.
I can't copy into internal storage.
I think it have something to do with permissions but I installed so many custom roms but since the 1.3.5 version every rom won't work.
I really don't know what to do. Used adb for logcat and I will upload it. I searched for /storage/emulated/0 and there is something.
"addStorageLocked 65537 /storage/emulated/0"
Btw, I don't have a efs partition it says error in the recovery. Something like /efs partition not found.
This happend after 1.3.5. For this rom everything worked fine.
Hope you guys can help me :/
EDIT:
E:failed to mount /efs (Invalid argument)
E:failed to mount /efs (Invalid argument)
# Manual Mode #
-- Appling Multi-CSC...
Applied the CSC-code : unknown
Successfully applied multi-CSC.
This appear in the STOCK recovery but I can use the recovery it works. (But still stuck on bootlogo)
Wiping data/factory and cache already done.
You are installed stock with odin and phone go in reboot samsung logo?
Sent from my GT-I9105 using XDA Free mobile app
gentr said:
You are installed stock with odin and phone go in reboot samsung logo?
Sent from my GT-I9105 using XDA Free mobile app
Click to expand...
Click to collapse
exactly. If I flash stock with odin, it reboots after the flash into the samsung bootlogo and there it stucks.
you can try the procedure described here and also add the pit file and enable re-partition as described in the NOTE 1 section of the first post
When you are in samsung logo torn off the phone with power button and go in recovery and do factory reset- wipe check partition and wait.
Sent from my GT-I9105 using XDA Free mobile app
karamancho said:
you can try the procedure described here and also add the pit file and enable re-partition as described in the NOTE 1 section of the first post
Click to expand...
Click to collapse
Flashing the original rom was a success in odin but it stuck at the bootlogo and the sound won't play till the end.
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And this is the error if I want to flash the PIT file.
btw: in Odin Mode there's written
Odin Mode
Product Name: GT-I9105P
Current Bin: Samsung Official
System Status: Custom
gentr said:
When you are in samsung logo torn off the phone with power button and go in recovery and do factory reset- wipe check partition and wait.
Sent from my GT-I9105 using XDA Free mobile app
Click to expand...
Click to collapse
Already tried this so many times it won't solve my problem. It stucks in the Samsung Logo.
Try again with Odin 3.9 ad file in ap. After that you can get stock recovery when torn of the phone?
Inviato dal mio GT-I9105 utilizzando Tapatalk
Sounds bad.. Try downgrade to 4.1.2 and then update 4.2.2 via ota or kies.
Can u use wifi or mobile data?
If u can, problem is not efs file.
Sent from my GT-I9105P using XDA Premium 4 mobile app
gentr said:
Try again with Odin 3.9 ad file in ap. After that you can get stock recovery when torn of the phone?
Inviato dal mio GT-I9105 utilizzando Tapatalk
Click to expand...
Click to collapse
I tried it with Odin 3.9.
rs tony said:
Sounds bad.. Try downgrade to 4.1.2 and then update 4.2.2 via ota or kies.
Can u use wifi or mobile data?
If u can, problem is not efs file.
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I can use wifi and mobile data both are working.
There is no firmware 4.1.2 for german Modell. Every german firmware are on 4.2.2.
There are other 4.1.2 firmware on samfirmware but for other countries like china for example.
Goekay said:
I can use wifi and mobile data both are working.
There is no firmware 4.1.2 for german Modell. Every german firmware are on 4.2.2.
There are other 4.1.2 firmware on samfirmware but for other countries like china for example.
Click to expand...
Click to collapse
Look from sammobile. There should be 4.1.2 for every country.
Sent from my GT-I9105P using XDA Premium 4 mobile app
Goekay said:
Hello guys, I have a big problem.
3 weeks ago I had Ressurection Remix custom rom as daily driver.
Everything is alright, even if it won*t wake up sometimes, it's okay too.
I visit everyday the xda forum and look for news and updates for my device GT-I9105P.
I saw a updated version of AOSB custom rom to version 1.3.5 and downloaded it.
Boot to CWM 6.0.4.5 and wiped data and cache and installed AOSB 1.3.5.
After I hit reboot it stucks on the bootscreen. I wait over 10 minutes.
Since I stuck on this bootscreen I can't install any other rom and can't even restore my backup.
They all stuck at the bootscreen. Tried the Original stock rom via odin and it's the same, it won't boot.
I realised by the original rom there are the samsung boot sound and i heard that the sound won't play till the end.
What I don't understand, I can install CyanogenMod it works not 100%.
I can't download anything. If I want to download Apps or update them, the error google playstore has stoped apear.
After that I can't open Playstore again. It closes imediately after I hit the icon with the same error.
I can't even download from the Browser. If I download via browser it says the download managar has stoped.
If I connect my device with my laptop I can see the Internal Storage and the SD card BUT: The Internal Storage is empty.
I can't copy into internal storage.
I think it have something to do with permissions but I installed so many custom roms but since the 1.3.5 version every rom won't work.
I really don't know what to do. Used adb for logcat and I will upload it. I searched for /storage/emulated/0 and there is something.
"addStorageLocked 65537 /storage/emulated/0"
Btw, I don't have a efs partition it says error in the recovery. Something like /efs partition not found.
This happend after 1.3.5. For this rom everything worked fine.
Hope you guys can help me :/
EDIT:
E:failed to mount /efs (Invalid argument)
E:failed to mount /efs (Invalid argument)
# Manual Mode #
-- Appling Multi-CSC...
Applied the CSC-code : unknown
Successfully applied multi-CSC.
This appear in the STOCK recovery but I can use the recovery it works. (But still stuck on bootlogo)
Wiping data/factory and cache already done.
Click to expand...
Click to collapse
I have this same problem
I installed cm11 on my galaxy s2 i9105 plus
now its stuck at boot screen please help
im newbie to all this stuff?
what i could do??
rs tony said:
Look from sammobile. There should be 4.1.2 for every country.
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It's the same site. There isn't 4.1.2 firmware for the german one but could it be a problem if I download a english one?
There is a screenshot and they are the only countries with 4.1.2. The other above are all 4.2.2.
basithboss said:
I have this same problem
I installed cm11 on my galaxy s2 i9105 plus
now its stuck at boot screen please help
im newbie to all this stuff?
what i could do??
Click to expand...
Click to collapse
You don't have the same issue. Looked at your posts and everything contain the same thing.
look at this guide and don't write in threads which don't have the same issue.
http://forum.xda-developers.com/showthread.php?t=2303395
there you go.
Goekay said:
It's the same site. There isn't 4.1.2 firmware for the german one but could it be a problem if I download a english one?
There is a screenshot and they are the only countries with 4.1.2. The other above are all 4.2.2.
Click to expand...
Click to collapse
U can safely flash diffrent region firmware than urs
Sent from my GT-I9105P using XDA Premium 4 mobile app
rs tony said:
U can safely flash diffrent region firmware than urs
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I don't know how to describe how thankful I am...Thank you very very very much my friend! It works now!
Goekay said:
I don't know how to describe how thankful I am...Thank you very very very much my friend! It works now!
Click to expand...
Click to collapse
Good and if u update ur phone via kies, u can get warrantly back
Sent from my GT-I9105P using XDA Premium 4 mobile app
rs tony said:
Good and if u update ur phone via kies, u can get warrantly back
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
installed 4.2.2 again and instant reflash cm11 and everything works thank you again

Categories

Resources