[MOD] Deodexed app & framework|Battery with %|4x5 Appdrawer|for JB k2_u & k2_ul
Deodexed app & framework | Battery with % | 4x5 Appdrawer | for JB k2_u & k2_ul
Hi there, i have some goodies for HTC One SV (k2_u & k2_ul) User who are on Jelly Bean.
Credits:
- to jmztaylor and Facepalm crew for getting S-Off and for his tips
- to bkcokota for a mostly working recovery
- dsixda for his kitchen
- UOT Kitchen for the Battery Mod
- the community where it did a lot of research
Notice:
I tested this myself on a european non-lte phone (codename: k2_u) and it works. But as always bricks can happen and i am not responsible if your phone is dead afterwards.
Don't do this, if you are not experienced enough!
This files are for flashing in recovery. As the stock ROM is odexed, you have to flash the deodexed app & framework folder first. Then you can easily use the rest.
Requirements:
- a S-Off HTC One SV with Softwareversion: k2_u 2.14.401.107; k2_ul 2.14.401.6
- the downloads below
- a recovery where you can flash the files
Deodexed app & framework folder
k2_u 2.14.401.107 Deodexed app & framework - Mirror
Md5 Sum: 0637F1EF2F81CA68C5DFDABDACD04A5B
k2_ul 2.14.401.6 Deodexed app & framework - Mirror
Md5 Sum: 86035F9E95459B4997B5C84DAB724561
Battery Mod - Stock Battery with %
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
k2_u 2.14.401.107 Battery Mod - Mirror
Md5 Sum: 401634E0EFC07780CAE5C473F0897872
k2_ul 2.14.401.6 Battery Mod - Mirror
Md5 Sum: 055A6436930592EEC3A6DF54D174ECBC
4x5 Appdrawer
k2_u 2.14.401.107 4x5 Rosie - Mirror
Md5 Sum: C788B37912FF858D00CD39A7FF3B32D1
k2_ul 2.14.401.6 4x5 Rosie - Mirror
Md5 Sum: 8A6AF79442485019F7B0646A91BFD4CB
How to install:
First of all: make a nand backup in recovery, so you can easily go back if you don't like it!!!
Download the zip files you want (deodexed app & framework folder first), copy to sd card and flash through recovery.
Wipe cache and dalvik cache, the reboot.
To delete 4x5 Appdrawer or Battery Mod, flash again deodexed app & framework folder or restore your nand backup.
I hope you have fun and enjoy it!
Please tell me, if i missed something.
Cheers.
Volume Wake Mod
For k2_u (Non-LTE) and k2_ul (LTE) Users!
Credits
- zarboz for figuring out
- nitsuj17 for the init.d script
- tbriden for his guide
Very special thanks to all of them!
As our kernel itself has no init.d support, you need an app like Uni-init v1.0 to make this work.
Download:
Volume Wake für k2_u (Non-LTE) - Mirror
Md5 Sum: 96B3BC6CCF8789A392847FF7118039CE
Volume Wake für k2_ul (LTE) - Mirror
Md5 Sum: 368D24E39BDC7E457256C66D07C20F78
How to install:
- As always: make a backup in recovery
- If you don't have it, download and install BusyBox and update to the latest
- Download and install Uni-init v1.0
- Activate Init.d Support (it will maybe ask you to download latest binaries, do it)
- Reboot and use the "Verify" Button in Uni-init v1.0 to check if init.d is active
- If you are successful, reboot to recovery and flash the fitting Volume_Wake.zip from above
If the Volume Wake Mod doesn't work at first boot, reboot again to get the script loaded at boot, now it should be fine.
5x4 Appdrawer & landscape mode for Homescreen
Hi there, i've got a request for rosie with 5x4 appdrawer & landscape mode for Homescreen. So here it is.
This mod is for Jelly Bean Rom, latest base.
Its available for k2u and k2ul.
Notice:
- You must have installed deodexed app & framework folders from first post before using this mod!!!
- Landscape don't work for lockscreen!
- Not all widgets are made for landscape (especially third-party widgets)
- Flash this on your own risk, i'm not responsible for bricked devices
Pictures:
Download:
- k2u_JB_5x4_Landscape.zip (non-LTE) - Mirror
- k2ul_JB_5x4_Landscape.zip (LTE) - Mirror
How to install:
1.) Download the file for your device and copy to external sd card.
2.) Boot to recovery and make a backup first.
3.) Flash in recovery.
4.) Wipe cache and dalvik cache.
5.) Reboot.
Enjoy
Yeah !
Thanks man.
I didn't have time to test stuff lately since I'm still "reducing" the stock rom, but I did made a cwm flashable zip to change the bootanimation (from the one you sent here) and delete the bootsound
Matlevo12 said:
I didn't have time to test stuff lately
Click to expand...
Click to collapse
No problem, man. If you have time maybe you can make a short check that the fixes work (if nobody others reported before).
old.splatterhand said:
Updated the first two posts:
- All mods are made for k2_ul too
- Flashable also for HTCdev unlocked users (who are on the same base)
Click to expand...
Click to collapse
Does this mean we can now flash these mods even S-ON ?
Seanie280672 said:
Does this mean we can now flash these mods even S-ON ?
Click to expand...
Click to collapse
Yes, you can use them with S-On too.
But make a backup in recovery before, only to be safe.
old.splatterhand said:
Yes, you can use them with S-On too.
But make a backup in recovery before, only to be safe.
Click to expand...
Click to collapse
Great thanks, I only want the battery mod.
I changed all links away from dropbox the last hour.
old.splatterhand said:
I changed all links away from dropbox the last hour.
Click to expand...
Click to collapse
Thanks, could you possibly put the framework files on a different server, the server they are currently on is a pain in the arse and have to wait over an hour between each download attempt. ive tried 3 times to download it now, also a very slow server, 2 hours to download the 300mb framework files.
Good news. i am only interested in flashing the battery % mod , should i flash before deodexed app and framework or not?? i am S-ON. Another doubt that i have is what should i back up (Bootloader ,Boot ,Recovery ,System ,Cache ,Data ,Android Secure)??
Thanks
Seanie280672 said:
Thanks, could you possibly put the framework files on a different server, the server they are currently on is a pain in the arse and have to wait over an hour between each download attempt. ive tried 3 times to download it now, also a very slow server, 2 hours to download the 300mb framework files.
Click to expand...
Click to collapse
I'm sorry and i know, but to be honest:
I tried 5-6 filehoster another filehoster and with each one my uploads were crashing after 60-80% uploaded. And to upload a rom with 560 mb i need about 4-5 hours with my internet connection. Now think about how many times i tried to upload and it was crashing the most time.
I tried dropbox, but as you have seen it causes to much traffic in only two days.
As long as i find no better/stable alternative i will stick to this hoster (cause i had no single crash with my uploads there).
titin83 said:
Good news. i am only interested in flashing the battery % mod , should i flash before deodexed app and framework or not??
Click to expand...
Click to collapse
You can try it without (at your own risk), but make a backup before.
titin83 said:
Aother doubt that i have i what should i back up (Bootloader ,Boot ,Recovery ,System ,Cache ,Data ,Android Secure)
Click to expand...
Click to collapse
I asked same question in TWRP thread, but i personally think Bootloader is not necessary (all the time).
titin83 said:
Good news. i am only interested in flashing the battery % mod , should i flash before deodexed app and framework or not?? i am S-ON. Another doubt that i have is what should i back up (Bootloader ,Boot ,Recovery ,System ,Cache ,Data ,Android Secure)??
Thanks
Click to expand...
Click to collapse
Back it all up yes, put a tick in every box, better safe than sorry, its will only backup your phone as it is right now in its current state and yes you have to flash the framework zip first, then clear cache etc, I then rebooted my phone to the normal user state, shutdown again and back into recovery then flashed the battery mod.
Files are up now on Dev-Host AND mirrored on androidfilehost.com to provide you a good and stable availability!
Have fun!
Hopefully soon Cricket users will have one for there phones. I sent old.splatterhand a back up of my CWM backup so hopefully he will be able to work his magic with it.
old.splatterhand said:
Volume Wake Mod
For k2_u (Non-LTE) and k2_ul (LTE) Users!
Credits
- zarboz for figuring out
- nitsuj17 for the init.d script
- tbriden for his guide
Very special thanks to all of them!
As our kernel itself has no init.d support, you need an app like Uni-init v1.0 to make this work.
Download:
Volume Wake für k2_u (Non-LTE) - Mirror
Md5 Sum: 96B3BC6CCF8789A392847FF7118039CE
Volume Wake für k2_ul (LTE) - Mirror
Md5 Sum: 368D24E39BDC7E457256C66D07C20F78
How to install:
- As always: make a backup in recovery
- If you don't have it, download and install BusyBox and update to the latest
- Download and install Uni-init v1.0
- Activate Init.d Support (it will maybe ask you to download latest binaries, do it)
- Reboot and use the "Verify" Button in Uni-init v1.0 to check if init.d is active
- If you are successful, reboot to recovery and flash the fitting Volume_Wake.zip from above
If the Volume Wake Mod doesn't work at first boot, reboot again to get the script loaded at boot, now it should be fine.
Click to expand...
Click to collapse
Sorry but it does not working on my phone...
VSPZ said:
Sorry but it does not working on my phone...
Click to expand...
Click to collapse
You have busybox installed?
And the 89volwake file under system\etc\init.d?
Restarted the phone?
old.splatterhand said:
You have busybox installed?
And the 89volwake file under system\etc\init.d?
Restarted the phone?
Click to expand...
Click to collapse
I have Busybox 1.21.0 and the 89volwake file under system\etc\init.d.
I restarted the phone over 20 times but still nothing happens.
Any other suggestion please?
VSPZ said:
I have Busybox 1.21.0 and the 89volwake file under system\etc\init.d.
I restarted the phone over 20 times but still nothing happens.
Any other suggestion please?
Click to expand...
Click to collapse
You have downloded thr right package for your phone version (check md5)?
Also installed Uni-init v1.0 and activated init.d inside the app and verified?
titin83 said:
Good news. i am only interested in flashing the battery % mod , should i flash before deodexed app and framework or not?? i am S-ON. Another doubt that i have is what should i back up (Bootloader ,Boot ,Recovery ,System ,Cache ,Data ,Android Secure)??
Thanks
Click to expand...
Click to collapse
I just flashed the Battery Mod without the framework and everything worked fine! (One SV with LTE)
Related
Disclaimer: I'm not responsible for any damage caused to your device by following these instructions(though it may not happen!)
Screen Shots are in the 2nd post !!
Change Log is in the 5th post
Things i'm thinking to add are at 4th post.
My sincere credits to Yuweng & casacristo for being with me in trying to make a2sd work in MTK phones !!
Pre-requisites:
For your Computer:
- 7zip
For your phone:
-Rooted, of course !
- Modded Recovery [Get it from here]
-Make a nandroid recovery of your phone before installing.
-Full wipe/factory reset, either through phone or modded recovery is recommended required.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yeah ! Bala's ROM is SilverLight™ |
Click to expand...
Click to collapse
Click to expand...
Click to collapse
SilverLight™
SilverLight™ 5 - alpha !
Hi friends, sorry i'm too late than i expected. Day's passed on swiftly and i'm here to just release the alpha of Silverlight 5.
SilverLight 5 bug fixes are here : http://forum.xda-developers.com/showthread.php?p=30734779#post30734779
Important feature is that it is based on Android 2.3.6 !
It has been ported from Alcated 918D [MTK 6573]
Everything works fine. (Special thanks to yasir bro for testing it !!!)
I also named it as Stock Android 2.3.6 update for Spice Mi-350n.
It is just stock, for now
Another important thing is that, I'm making this port an open-source port. Since, i saw new rom makers emerging, it would be easy for them to cook/build custom ROMs from this port.
One thing, if someone wants to use it, do give me an information and a credit in your thread !!
Click to expand...
Click to collapse
Sorry, if i have disappointed you, but full version will be released as soon as possible.
Whats more to come:
Suspense !
You can even come to the time when i ported this one and how i suffered from there on without time to add features, in the download page !!
FROM HERE, ALL DOWNLOADS WILL BE AVAILABLE AT OUR GOOGLE CODE PAGE:
http://code.google.com/p/silverlight-roms-350n/
Click to expand...
Click to collapse
In the downloads page, download
2.3.6-update-2.zip
&
a2sd-p1.zip
First flash a2sd-p1.zip and then flash 2.3.6-update.zip.
NOTE: Flash Dark-tremor a2sd and any equivalent if you want to use it.
SilverLight™ 4:
Change Log:
*Bugs fixed
*Added new tweaks:
---Forced launcher into memory
---Raised JPEG quality to 100%
---User Interface will e rendered with GPU
---The time that a black screen is seen after a call is reduced
---Better Touch screen & Scroll responsiveness
---Better Battery life
---3G,Net-Speed & Photo,video recording quality incresed.
*Added SilverLight custom script & Loopy smoothness script at init.d
*Removed SuperCharger script
*Replaced FileExplorer with a new MIUI one - try it!
*Replaced Music app with ICS Music app - try it !
*Removed XDA app (causes few problems)
*Removed Go-Launcher EX (for space)
*Tweaked Youtube app to load 720p videos with Wi-Fi as well as 3G !
*Added a new boot_logo !
Try it now !!!
It is a SIGNED update.zip. So don't extract it as the other version.
Flashing this zip is enough if you are on SilverLight™ 3.
If you are on stock V2, then download PART1.zip only and flash it before flashing SilverLight™ 4 ! (no need PART2.zip - no problem even if you flash it).
SilverLight™ 4
DOWNLOAD: http://www.mediafire.com/?q92e83s4zn3arhh
Click to expand...
Click to collapse
Click to expand...
Click to collapse
EXTRAS:
PART 1:(not signed) http://www.mediafire.com/?rx7gmqpj9d6il62
PART 2:(not signed) http://www.mediafire.com/?i6l67a2176l7no9
FOR A2SD:
After installing the ROM, install Terminal Emulator app from market.
Open the app and type the following one by one:
su
a2sd install
##Phone will reboot
Open the app again,
su
a2sd datasd
##Phone will reboot
Open the app again,
su
a2sd cachesd
##Phone will reboot.
THATS ALL !!!
XXXXXXXXXXXXXXXXXXXXXXXXXXX----------------------------------------------XXXXXXXXXXXXXXXXXXXXXXXXXXXX
SilverLight™ 3
Features:
>> Based on Official Spice build v2 !(thanks to yasir bro!!)
-- If you are on Bala's ROM v1.5/1.01(or did not flash your phone by following this guide), then do please flash your phone with official build v2 using this guide. It takes a mere 7 minutes for you to flash it but it takes hours together for me to make one for v1.5. If you want, i can make one for v1.5 also, but it can't be released within one week. So, bear with me & do upgrade your phone to official v2 !!!
NOTE1: If you are on Bala's ROM v1.5, then you won't lose your apps. Just flash official v2 with the help of flashing tutorial and the flash SilverLight 3 !
NOTE2 (read this only after reading the flashing guide above): If you are upgrading, then in the flashing guide linked above, in step 5, i did it like & it worked : After loading the scatter file, with battery inserted,i connected the phone by pressing Back+Menu buttons. My pc detected it and i clicked Format->Download. I kept holding it till the red process completed and from there everything went fine and flashing was successful.
Click to expand...
Click to collapse
>> ICS Themed
--This is the reason why this update took a lot of time !! My first hands on theming. So, if you have anything to say, feel free.
Click to expand...
Click to collapse
>> V6 Supercharged
--Get ready to fly with the V6 Supercharger (script created by zippelinrox). Read more about it here. To set your custom settings, just open terminal emulator, type: su --> hit enter --> type: v6
Click to expand...
Click to collapse
>> No Bloatwares !
--The spice bloatwares are removed and its a clean ROM !!
Click to expand...
Click to collapse
>> Beats audio & Bravia Engine
-- Beats audio & Bravia engine mods are included !!
Click to expand...
Click to collapse
>> DarkTremor A2SD v2.7.5.3 beat4
--Enjoy installing unlimited apps with the a2sd !! Read more on using it in the following 3rd post !!
Click to expand...
Click to collapse
>> Pre-installed apps:
--A2SD GUI
--Adfree(no more ads)
--Barcode Scanner
--GO Launcher EX v2.87 (latest)
--ICS Clock Widget
--ICS search bar
--New ICS Launcher
--MobileUncleTools
--Experia Arc S Launcher
--SpiceUp - official app of the Spice Mi-350n Support site!
--Update Me Smartphone - check & download future ROM updates from phone itself!
--XDA app
Click to expand...
Click to collapse
>> Misc features
-- Busyboxed
-- Rooted !!
--Deodexed
--Zipaligned
-- Added ICS boot animation
-- Disabled boot sounds
-- Added Galaxy Nexus's Ringtones !
-- Home button Wake up mod included(it is up to you to install NoDeepSleep.apk)
-- Replaced default font with Roboto font (stock ICS font !!)
Click to expand...
Click to collapse
Click to expand...
Click to collapse
DOWNLOADS:
Download: http://www.mediafire.com/?i3sk5jqd9whi2g8
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Installation Instructions (SL-v3):
NOTE: Its is highly recommended to make a complete nandroid backup(including boot.img) before installing. Do not boot your phone in between.
Also disable Signature verification every time you flash a zip because they are not signed.
1) Download 'SilverLight-3_by_balamu96m.7z'. Extract it. Then you'll have SilverLight_Part1_by_balamu96m.zip , SilverLight_Part2_by_balamu96m.zip & SilverLight_Part3_by_balamu96m.zip(These are flashable zips. So do not extract them)
Click to expand...
Click to collapse
2) Copy all the three & place it in your sdcard. (preferably at the root).
Click to expand...
Click to collapse
3) Now boot into recovery (modded or CWM) and choose - flash zip from sdcard --> select zip from sdcard --> select SilverLight_Part1_by_balamu96m.zip.
Let it install without any error. DO NOT TRY BOOTING.
Click to expand...
Click to collapse
4) Now, before installing SilverLight_Part2_by_balamu96m.zip, mount 'System' & 'Data' in recovery (i.e) mounts --> system and then data. Now install SilverLight_Part2_by_balamu96m.zip by steps followed above !. DO NOT TRY BOOTING.
Click to expand...
Click to collapse
4) Again, with similar steps followed before, SilverLight_Part3_by_balamu96m.zip.
Click to expand...
Click to collapse
5) After installing SilverLight_Part3_by_balamu96m.zip, a do a full wipe/Factory reset in the recovery. (It is a must)
Click to expand...
Click to collapse
Click to expand...
Click to collapse
THATS ALL !! You have successfully installed SilverLight™ 3 !!
Now boot your phone. First boot may take long time (even 10 minutes !), but don't worry. It will boot !!
STEPS TO ENABLE A2SD after installing the ROM:
NOTE: If you had done this already for Bala's ROM v1.5, no need to do again.
1) Make a backup of all your sdcard files in your computer because partitioning will erase all your files.
2)Now boot in recovery --> partition sdcard --> partition sdcard --> Swap size: 0mb --> Choose size of the partition that you prefer (recommended 1024mb)(not more than 1399 mb because beta 04 supports till that only)
Let it partition your sd without any error !!
[NOTE: If you are partitioning for the 1st time with recovery, the default type of the partition will be ext2 - that is what we need & with this a2sd will work .
If you have mistakenly upgraded your partition to ext3 or ext4, then use MiniTool Partition Wizard (its free) and change your partition to ext2. Only then a2sd will work.]
Now boot normally. Now with the help of A2SD GUI app, make apps to be stored in sdcard(will be on the main-screen!). Your phone will reboot once or few times. Read more about using A2SD GUI in the following 2nd or 3rd post !!
VOILA !! a2sd is working !!! You can verify/view its space with titanium backup app !!
Now you can place all your files back on your sdcard.
With recovery you can even backup your sd-ext whenever required. (sd-ext is the place where apps which you install will be stored)
XXXXXXXXXXXXXXXXXXXXXXX_--------------------------------XXXXXXXXXXXXXXXXXXXXX
__________________________________________________________________________________________________________________________________________
VERSION 1.5
__________________________________________________________________________________________________________________________________________
Features (v1.5):
---Removed all Spice bloatwares !
---Added the following as default programs:
--A2SD GUI !~HOT~
--Mobile Uncle Tools~HOT~
--AdFree (No more Ads) ~HOT~
--Android Assistant
--Barcode Scanner
--GO Launcher EX
--Google Play Store[updated Market app] !
--Google Search[updated]
--Terminal Emulator
--YouTube
---Darktremor A2SD v2.5.7.3 beta 04~HOT~
---Added BEATS AUDIO - enhances sound. You can feel it in earphones.~HOT~
---Added Sony BRAVIA IMAGE ENGINE - enhances image quality. Try it!~HOT~
---DEODEXED !!~HOT~
---Zipaligned all apks to optimize RAM usage !
---Modified Status bar (fading error fixed) & Drop-Down with transparency & modded battery icon! (see screen-shots [v1.5]!)
---Added new colourful wallpapers to the default wallpaper gallery !
---Added Nexus One boot animation and shut animation!
---Added Samsung Vibrant's boot and shut sounds!
---Added Nexus default ringtones and notifications(error fixed!)
---BusyBox added !
---Pre-rooted, of course!
INSTALLATION INSTRUCTIONS [v1.5] :
NOTE: Its is highly recommended to make a complete nandroid backup(including boot.img) before installing.
Also disable Signature verification every time you flash a zip because they are not signed.
1) Download 'Bala's_ROM_v1.5.7z'. Extract it.
You will have a folder named 'Bala's_ROM_v1.5'
In that you'll have PART-1.zip , PART-2.zip & PART-3.zip(These are flashable zips.So do not extract them)
2) Copy the folder & place it in your sdcard's root.
3) Now boot into recovery and choose - flash zip from sdcard --> select zip from sdcard --> #open folder#'Bala's_ROM_v1.5' --> select PART -1.
Let it install without any error. Now try booting your mobile. The phone will not boot (more clearly: should not boot if installation completed correctly ! lol !)
4) Now, before installing PART-2, mount 'System' & 'Data' in recovery (i.e) mounts --> system and then data. Now install PART-2 by steps followed above !
[Now try booting. It should boot now !! LOL ]
[WHAT YOU BOOTED ABOVE IS NOT THE FULLY WORKING ROM, MANY THINGS DOESN'T WORK !! SO BOOT AGAIN TO RECOVERY ]
4) Again, with similar steps followed before, install PART-3.
5) After installing PART-3, a do a full wipe/Factory reset in the recovery. (It is a must)
THATS ALL !!This is Complete Version 1.5. You have successfully installed VERSION 1.5. Sorry for making it large. I'll try reduce it later.
STEPS TO ENABLE A2SD after installing the ROM:
1) Make a backup of all your sdcard files in your computer because partitioning will erase all your files.
2)Now boot in recovery --> partition sdcard --> partition sdcard --> Swap size: 0mb --> Choose size of the partition that you prefer (recommended 1024mb)(not more than 1399 mb because beta 04 supports till that only)
Let it partition your sd without any error !!
[NOTE: If you are partitioning for the 1st time with recovery, the default type of the partition will be ext2 - that is what we need & with this a2sd will work .
If you have mistakenly upgraded your partition to ext3 or ext4, then use MiniTool Partition Wizard (its free) and change your partition to ext2. Only then a2sd will work.]
Now boot normally. Now with the help of A2SD GUI app, make apps to be stored in sdcard(will be on the main-screen!). Your phone will reboot once or few times. Read more about using A2SD GUI in the following 2nd or 3rd post !!
VOILA !! a2sd is working !!! You can verify/view its space with titanium backup app !!
Now you can place all your files back on your sdcard.
With recovery you can even backup your sd-ext whenever required. (sd-ext is the place where apps which you install will be stored)
DOWNLOAD LINK::
http://www.mediafire.com/?nt6idp7vw2qdl3x
(sorry for making it large !)
_________________________________________________________________________________________________________________________________________________
VERSION 1.01
_________________________________________________________________________________________________________________________________________________
Deodexed version 1.01 added !! Same installation instructions !! Check Downloads !
Features (v1.01):
(updated 20 Mar)
1.Removed all Spice bloatwares !
2.Added the following as default programs:
-Android Assistant
-Barcode Scanner
-GO Launcher EX
-Google Play Store[updated Market app] !
-Google Search[updated]
-Nexus Revamped Live Wallpaper!
-Terminal Emulator
-YouTube
2. Zipaligned all apks to optimize RAM usage !
3.Modified Status bar & Drop-Down with new battery icon! (see screen-shots [v1.01]!)
4. Added new colourful wallpapers to the default wallpaper gallery !
5.Added Nexus One boot animation and shut animation!
6.Added Samsung Vibrant's boot and shut sounds!
7.Added Nexus default ringtones and notifications!
8. Pre-rooted, of course!
Overall it looks to be an Ultra fast & Stable ROM !!
INSTALLATION INSTRUCTIONS [v1.01] :
(instructions updated 20 mar)(fixed all reported errors!)
1. Download the file 'Balas_ROM_v1.01_GB_signed_update.zip' and copy it to your sdcard - root of the sdcard is preferred.
2. Flash it as 'update.zip' in modded recovery.
(i.e) [for beginners] Go to recovery --> Flash zip from sdcard --> choose zip from sdcard and select Balas_ROM_v1.01_GB_signed_update.zip
NOTE: Since the file is signed there is no need to disable signature verification !!
Let the installation process complete without any error.
Then reboot.
Voila !! Your new ROM is booting !!
Deodexed version may take some more time to boot than normal. Don't get afraid !
Try and post your comments !!
DOWNLOAD LINKs (update.zip)(Mediafire) :
- Normal odexed version - Bala's_ROM_v1.01_GB_signed_update.zip
- Deodexed version - Deodexed_Bala's_ROM_v1.01_GB_signed_update.zip
Screen Shots in the second post !
An extract of review posted by yasirmujtaba: (here)
yasirmujtaba said:
The rom porvided by bala is supercool
I m trying to rate it..
Style:-
1-Go launcher
2-Custom battery icon
3-Modified Notification bar
4-Custom wallpapers and ringtones & notifications
OVERALL:- 9/10
Performance:-
Very Very good response no lagging even
when skyfire dolphin and opera are running simultaneously
Ram consumption is very effective
Overall- 9/10
So the rom scores a huge number of 9
Click to expand...
Click to collapse
Hit THANKS if you like my ROM !!
Screen Shots !!
SCREEN SHOTS - SilverLight™ 3:
SCREEN SHOTS v1.5:
SCREEN SHOTS v1.01:
NOTE:
-The android version displayed there (in Bala's ROM v1.01&v1.5) is just change in number. The actual version is 2.3.4 only !! Only you know that it is 2.3.4. For others it is 2.3.7 !!
USING A2SD GUI [For v1.5+]
'A2SD settings' on the app's main screen.
------You can choose where apps that you install should be saved either in sd-ext (sdcard partition) or your internal memory.
------ 'Zipalign on boot is off' - is recommended because the ROM is already zipaligned and doing it again on boot will take more time to boot.
------'Swap is deactivated' - I have not used it.....maybe you/anyone can try and reply !
DALVIK:
-- You can choose where Dalvik cache should be saved. Go more info on Dalvik-cache, try googling n reading the wiki about it.Other things can remain the same......
---other tabs, you yourself can read & understand !!
Some more:
One thing to remember - sd-ext is like internal memory for phone, but phone can't find how much space is used or left in sd-ext. Titanium backup will help you there......
All third-party/system apps will tell that apps are installed in phone memory......you should understand that sd-ext is also like internal memory for phone and all other apps !!
Apps should be installed normally .......but your free space in internal memory will remain the same even after installing apps.....you'll notice that ur sd-ext space will be reducing........
Phone can't find how much space is left in sd-ext but titanium backup will help you to know !!
If you find decrease in phone memory even when a2sd in enabled, use a2sd gui to reinstall all app to sd-ext.....u can also type this command in terminal emulator :
su
a2sd reinstall
More over one should not move apps to sdcard in 'application settings' when using a2sd !!
These are few things that i'm trying to add:
Trying to add few requests by some users!!
Extended Power menu with Reboot, Recovery & download - working on it.
Click to expand...
Click to collapse
Change log:
SilverLight™ 3:
*Removed Terminal Emulator
*Removed Android Assistant
*Based on Official spice build v2
*Highly modified framework-res.apk & SystemUI.apk with ICS theme.
*Added new ICS Launcher
*Added ICS search bar & ICS Clock
*Added V6 SuperCharger!
*Added Xperia launcher
*Added SpiceUp app
*Added Update-Me-Smartphone app
*Added XDA app
*Changed boot animation with ICS's one
*Disabled boot sound
*Added Roboto font
*Added Home Button wake up mod
Bala's ROM v1.5:
*Removed Nexus Revamped Live Wallpaper
*Added A2SD GUI
*Added Mobile Uncle Tools
*Added AdFree
*Added DarkTremor A2SD v2.7.5.3 beta 4
*Added Beats audio & Bravia Engine
*Added Busybox
Bala's ROM v1.01:
*Initial release
what is special in it I've already done all the things you've
done.
and what about ram consumption ......
but thanks for your hard work.....
your Balas_ROM_v1.01 not getting installed
hey.... balamu96m
your nandroid- custom ROM [Balas_ROM_v1.01] is not getting installed....
what is the problem????
i hav followed all the above steps...
i am able to Restore my nandroid backup done by me.... but when i tried your.. its not getting installed....
it shows "Oops... Something went wrong..." message.
[ i am using same recovery (fly blackbird iq260) in my phone as u hav posted screenshots above....
wanna try this rom...
help me out...
same problm here.........
Oops... Something went wrong...
balamu96m said:
please elaborate your problem.......is your phone not booting ?? or not able install in modded recovery ??
try making a wipe data/factory reset and then install the ROM......also disable 'Signature Verification' (it is a must) and try.............reply !
Click to expand...
Click to collapse
1. i hav wiped all data
2. i hav wiped SD card
3. disabled sign verification
4. unzipped yor rom and puted in proper folder.
5. but i selected to restore yor rom its shows some ..... (dots) for few second and shows oops something went wrong...
6. i am not able to install yor rom... using and testing its a later thing...
i'm trying to fix the error - 'Oops..something went wrong'.............also i'll try to create a working update.zip........................
about the RAM consumption, without ant app running, i'm getting 101 mb free and 128mb used..........it looks to ok but need to improve............
i'll post the update.zip as soon as possible !!
hey friends! uploaded update.zip !! It is also Zipaligned to optimize RAM usage !! check first post !! i checked it in my phone and its working !!! try it and reply !!!
balamu96m said:
i'm trying to fix the error - 'Oops..something went wrong'.............also i'll try to create a working update.zip........................
about the RAM consumption, without ant app running, i'm getting 101 mb free and 128mb used..........it looks to ok but need to improve............
i'll post the update.zip as soon as possible !!
Click to expand...
Click to collapse
there is only 70 mb ram free
but response is pretty good .........
on moe thank to you bro.........
yasirmujtaba said:
there is only 70 mb ram free
but response is pretty good .........
on moe thank to you bro.........
Click to expand...
Click to collapse
Thanks for the review dude !! now working on deodexing.........!!
will try to post it soon !
Deodexed version uploaded !! check first post !!
balamu96m said:
Deodexed version uploaded !! check first post !!
Click to expand...
Click to collapse
Flashing Now Tell You Soon
Flashing
4th Time Today lol["CAN IT EFEECT MY ROM LIKE MY E6??"]
aN Can You Please Explain Dodexing In Simple Words
Is It Related to Theme A Rom ,,,
Sorry If I Am Harassing You...
yasirmujtaba said:
aN Can You Please Explain Dodexing In Simple Words
Is It Related to Theme A Rom ,,,
Sorry If I Am Harassing You...
Click to expand...
Click to collapse
DeOdexing is the process of re-bundling that uncompressed critical data (.odex files) back into your compressed .apk (& .jar) files, so that now all of the data is included in the .apk files necessary to run your applications without the presence of .odex files
In addition all the data is now included within the .jar files necessary to utilize your framework components without .odex files. In a DeOdexed file structure, there are no odex files present.
What is the benefit of DeOdexing?
Deodexing doesn't speed your phone up or do anything of the sort.
It is simply something that is necessary to be able to theme a stock ROM.
Theoratically it should slowdown phone but practically it is negligible.
zipaliging is the process of reorganizing the manner in which the .apk is packaged to optimized it for being parsed faster by the android OS, it is comparable if not better than the odex file structure, so you get the best of both worlds; a themed ROM and the speed of an optimized file structure.
If one can implement all things properly phone will defenately speed up.
i will also make custom rom... but in my vacation. till i will use others.
djgj said:
DeOdexing is the process of re-bundling that uncompressed critical data (.odex files) back into your compressed .apk (& .jar) files, so that now all of the data is included in the .apk files necessary to run your applications without the presence of .odex files
In addition all the data is now included within the .jar files necessary to utilize your framework components without .odex files. In a DeOdexed file structure, there are no odex files present.
What is the benefit of DeOdexing?
Deodexing doesn't speed your phone up or do anything of the sort.
It is simply something that is necessary to be able to theme a stock ROM.
Theoratically it should slowdown phone but practically it is negligible.
zipaliging is the process of reorganizing the manner in which the .apk is packaged to optimized it for being parsed faster by the android OS, it is comparable if not better than the odex file structure, so you get the best of both worlds; a themed ROM and the speed of an optimized file structure.
If one can implement all things properly phone will defenately speed up.
i will also make custom rom... but in my vacation. till i will use others.
Click to expand...
Click to collapse
well you copy very nicely bro lol
waiting for your custom rom
---------- Post added at 06:46 PM ---------- Previous post was at 06:40 PM ----------
balamu96m said:
Deodexed version uploaded !! check first post !!
Click to expand...
Click to collapse
when updating error comes up
that
zip is corrupt
deodexing !
yasirmujtaba said:
Flashing Now Tell You Soon
Flashing
4th Time Today lol["CAN IT EFEECT MY ROM LIKE MY E6??"]
aN Can You Please Explain Dodexing In Simple Words
Is It Related to Theme A Rom ,,,
Sorry If I Am Harassing You...
Click to expand...
Click to collapse
edit: already posted the ans !! any way i'm posting it !!
Harassing ?? Not at all !! i have no problem dude !!
Well, i don't think flashing will affect your phone because i'll have to do it many a times a day and not just 4 times !!
When ever i try and flash my ROM and many a time it'll get struck at boot screen. So i'll be restoring/flashing it many a times a day !
Still thats my view.....i dunno really !
Deodexing.........in simple terms it is like this:
Our phone splits the apks and jars (only system apks and jars) into '.odex' files for fast processing of those files ..........but when the app is split into .apk/.jar file and .odex file, it not possible to edit them and make changes. when those files are deodexed or when we flash a deodexed ROM, the two files, '.odex' file and '.apk/.jar' are combined together and we will have only the apk or jar file and not the .odex file.......hence it makes editing or modifying possible. Also,only because of this, deodexed ROM takes some more time to boot!!
So because of this we can say that it related to theming........that too 'native' theme and not just Launcher' theming which are provided by GO Launcher etc.
I hope you understand...........!! Now any one can easily make themes for our phone !! just edit framework-res.apk and SystemUI.apk, modify,test and upload !!
yasirmujtaba said:
well you copy very nicely bro lol
waiting for your custom rom
---------- Post added at 06:46 PM ---------- Previous post was at 06:40 PM ----------
when updating error comes up
that
zip is corrupt
Click to expand...
Click to collapse
error ?? i didn't get any...........try disabling signature verification...........also try clearing cache, dalvik cache and data [clear data only after a backup via Titanium Bakup or nandroid]
Try n reply !!
Currently trying to add extended power menu with reboot, recovery and download !!
hey balamu96m
i installed yor deodexed signed rom.
works good with 10mb more then other roms.
but there is some problem with status bar(notification bar)...
it stops working when i connect usb cable wid my pc...
so i think problem is with battery application.
overall nice work man
Ice Cream Saga FINAL (v2.0)
GOAL:
The goal of this ROM is to deliver the most stock feel and visuals of the official Ice Cream Sandwich Developer ROM that HTC has released, with great improvements. With a balance of great working tweaks and mods and not much overkill on changes. The ROM offers both stability and performance.
Click to expand...
Click to collapse
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features:
- Base: 14.01.401.2 710 Research and Development WWE RUU
- Kernel: [URL="http://forum.xda-developers.com/member.php?u=4149516"]amidabuddha's 3.0.16-62a67df[/URL]
- Android 4.0.4
- Sense 3.6
- Completely stock
- Nenamark2 benchmark average 26.9 FPS
- AnTuTu benchmark highest score achieved is 3253 on stock kernel
- Cooked via dsixda's Android Kitchen
- Rooted via SuperSU
- Deodexed
- ZipAligned
- Busybox
- Init.d (Busybox run-parts)
- Bash
- Nano text editor + sysro / sysrw
- Complete Multi-Language
Click to expand...
Click to collapse
Recommended Radio:
20.76.30.0835_3831.19.00.110
(The one that came with the RUU)
Click to expand...
Click to collapse
AnTuTu Benchmark Results:
1.2GHz OC'ed with Smartassv2 Governor
1.5GHz OC'ed with Smartassv2 Governor
Click to expand...
Click to collapse
Changelog: NEW
FINAL (v2.0)
- Re-cooked from fresh
- AROMA Installer
- Using Stock Sense Experimental Kernel (refer to [KERNEL][16 Oct 2012] Tweaked 8.6 [3.0.46][ICS Sense][MIUIv4])
- Fixed app-links crash
- Auto-Brightness brightness lowered by 25%
- LED brightness lowered by 25%, still under testing
- Removed one level of LED brightness level
- 4-Way Rotation enabled
- No Video/Image compression on highest settings
- Doubled Video/Image Memory Cap
- AAC recording defaults to Stereo
- Increased AAC audio quality
- More accurate touch response
- V6 SuperCharger ready
- Ad-Blocker hosts files updated
- More tweaks and app changes that I don't remember
v1.0
- Added Sense 4 Wallpapers
- A few build.prop tweaks
Click to expand...
Click to collapse
Requirements:
- Common Sense, it really helps A LOT
- Must be on HBOOT v2.00.002, or v7.00.1002; users on v2.02.002 please check the warning on second post
- Any method of "unlocking" the bootloader hence the above
- Any custom recovery should work
Click to expand...
Click to collapse
Installation:
- Full wipe your phone (system,data,cache,dalvik or you may use your Custom Recovery's "Full Wipe" option)
- Flash the ROM
- Flash the boot.img found inside the ROM, if you are HTC-DEV Unlocked
- Flash your selected patches
- Then let your phone reboot, first boot may take some time
Click to expand...
Click to collapse
Links on 2nd post...
Warning, FAQs, Directions of use, ROM Download Link, Credits
WARNING TO THOSE USERS ON HBOOT 2.02.002!
HBOOT 2.02.002 does not allow the System/Lib partition to be FORMATTED or WRITTEN via Recovery and/or ROM Flash (updater-script), you will need to modify the updater-script of the ROM and remove the command to format System/Lib. Not doing so will always give you an error installing the ROM.
Click to expand...
Click to collapse
Directions of use: NEW
1. Flash the ROM to your phone.
2. Choose your preferred customization of the ROM. (Note: AROMA Installer may break if you've pressed "BACK" a couple of times. I'm not quite sure if it's my code is the problem or a bug on AROMA.)
3. Let the phone reboot itself, it may take more or less than 5~7 minutes depending on your customization.
4. Download the latest V6 Supercharger Script.
5. Set up SuperSU even if you're not connected to the net.
6. Install any Script Manager on your phone, and run the script as root and with su privilege.
7. Let the script initialize and choose your preferred settings on first run. (I chose Rock-Hard on Kernel, then YES to all other settings.)
8. It is recommended to install the options 16, 22, then 32 when you are done.
9. Let the phone reboot and witness how blazing fast your phone is.
Click to expand...
Click to collapse
FAQsNEW
Hey! Changelog is different from the xda-site than on the phone?
I was not able to change the one on the ROM. I was out for a couple of weeks, I just updated the apps and kernel when I got back to xda and uploaded the ROM. I could have done a few things more, like the widgets being installable or not via AROMA, and a tweaks and other stuff but felt like this should be ok. Thus, also suggesting this is final. I'm going to be trying my own port of Desire X to Desire S from now on.
V6 Supercharged, but why do I still need to run the script?
The ROM is V6 Supercharger-ready. Necessary files for the script has been modified. I DID NOT intentionally added a pre-set setting for the ROM as for you to choose your own. Giving you the freedom to change something if you want to. The script is necessary for the other changes.
Can I install this on older HBOOTs?
I will not support HBOOTs lower than v2.xx. This maybe is time for you to upgrade.
How do I upgrade my HBOOT then?
Here's a guide.
I am on HBOOT v2.02.002, and I don't want to put up with the System/Lib problem, any solution?
You have two choices: either you modify the updater-script of the ROM (takes a minute), specifically, you need to remove the line that formats the partition "mmcblk0p28", or just put a "#"(hash tag) prior to the command;
Or you can downgrade to HBOOT 2.00.002 using a downgrade guide(takes about 5 to 10 minutes). You can try my own, check my sig.
RUUs with v1.xxx have HBOOTs with v0.98.000, while v2.xxx have HBOOTs with 2.00.002. The latest ICS RUU has the HBOOT v2.02.002.
Does not boot after flashing. What gives?
Flash the KERNEL(boot.img) manually via fastboot. Please use search on how to.
My WiFi doesn't turn on. WTF?!
See answer above. If you are on HBOOT v2.02.002, check the warning above. You will need to manually copy the files found on the "lib\modules" folder from the ROM zip file to your phone's "system\lib\modules" folder directory. Overwrite all files.
Does this has the xxx language as you said its complete?
I cannot and will not enlist the languages that are supported here. But these are all from the RUU's and ROMs that I used to have then combined all of them. Here's the list of the "codes".
Everytime my keyboard is up, there's something on my status bar. What's up with that?
It's a feature that let's you choose your keyboard. Useful for other languages. You can remove it by disabling the other keyboards. Use search on how to disable apps on ICS. You may either turn-off or remove ZingKey and/or Thai Keyboard.
Click to expand...
Click to collapse
Ice Cream Sandwich and Sense 3.6 Official Guides:
(for HTC Sensation, but it should be the same)
HTC Sense 3.6 Quick User Guide
HTC Sense 3.6 User Manual
Click to expand...
Click to collapse
ROM FINAL (v2.0):NEW
Depositfile.com link by teadrinker
Uploaded.net link by Fredericosilva
Narod.ru and Dropbox links by Fatal1ty_18_RUS
Torrent Link by me
Torrent link by CortezTK
ROM zip file checksums:
MD5: 1a0f80bd0238b61738489c961651d83e
SHA-1: 9a4f7ff8bb4a643a89c02682efddbb0e1448cf81
Click to expand...
Click to collapse
Credits:
Google
HTC
dsixda
Chainfire
amidabuddha
zeppelinrox
pepcisko
leolawliet
cjoliver
j4n87
amarullz
YOU
Click to expand...
Click to collapse
Hit thanks if you will..
This is going to be flashable, prerooted official stock ICS ?
My device is ready for this release...:thumbup:
Sent from my HTC Desire S using xda premium
Aaaah Finally. Thanks Skanob
Skanob said:
Installation:
- Flash boot.img first if you are HTC-DEV Unlocked
- Full wipe youre phone (system,data,cache,dalvik)
- Flash the ROM
- Then let your phone reboot, 1st boot may take some time
Click to expand...
Click to collapse
Are you not better off flashing the boot.img file after you have flashed the ROM?
The installation guide is wrong.
1) wipe
2) flash the ROM
3) flash the kernel
If you would flash the kernel first and then wipe, you would wipe the kernel...
Sent from my Desire S using xda app-developers app
c.m.b said:
The installation guide is wrong.
1) wipe
2) flash the ROM
3) flash the kernel
If you would flash the kernel first and then wipe, you would wipe the kernel...
Sent from my Desire S using xda app-developers app
Click to expand...
Click to collapse
It's not. It really doesn't matter which one you flash first, ROM or KERNEL. Because HTC-DEV unlocked cannot flash the KERNEL via RECOVERY.
There may also be a problem with the HBOOT 2.02.002 as it does not want to wipe/format the system/lib partition via RECOVERY as experienced from the CHS OTA release. But it can be overwritten.
Skanob said:
It's not. It really doesn't matter which one you flash first, ROM or KERNEL. Because HTC-DEV unlocked cannot flash the KERNEL via RECOVERY.
There may also be a problem with the HBOOT 2.02.002 as it does not want to wipe/format the system/lib partition via RECOVERY as experienced from the CHS OTA release. But it can be overwritten.
Click to expand...
Click to collapse
Still first wipe than flash...
Flashing the kernel then wiping won't work!
Sent from my Desire S using xda app-developers app
c.m.b said:
Still first wipe than flash...
Flashing the kernel then wiping won't work!
Sent from my Desire S using xda app-developers app
Click to expand...
Click to collapse
If you have wiped the boot.img as well, then maybe you are right. But check my instructions again. Did you see something I said to wipe the boot.img?
Skanob said:
If you have wiped the boot.img as well, then maybe you are right. But check my instructions again. Did you see something I said to wipe the boot.img?
Click to expand...
Click to collapse
Nope, but in 4ext recovery is the option wipe everything except SD-card and most people use that to wipe...
That also wipes the kernel
Are we friends again ?
Sent from my Desire S using xda app-developers app
No download link ?
codryn said:
No download link ?
Click to expand...
Click to collapse
On its way
Sent from my Desire S using xda app-developers app
according to my version can flash it?
@OP
Maybe you should look at this:
http://forum.xda-developers.com/showpost.php?p=27720856&postcount=70
masterross said:
@OP
Maybe you should look at this:
http://forum.xda-developers.com/showpost.php?p=27720856&postcount=70
Click to expand...
Click to collapse
I have already.. But..
amidabuddha said:
Bad news for the owners of old hboots (6.98.xxxx and 0.98.2000), including myself: system + libs = 644 MB, so the new ROM will be flashable only on the new ones >= 2.00.2002, or it has to be excessively cleaned (to delete 100+ MB or move some apps to /data)
Click to expand...
Click to collapse
Will look into it when I have the free time again. Right now I'm testing the ROM.
Font Size
I am probably being stupid but I cannot decrease the font size. There is a setting within GMail but this does nothing. Came from Primo S where it was possible. Any suggestions.
PS Get update from HTC - Camera seems much improved and now have my WiFi tethering back!
Seems cool, are there some differences between this and mirok's way to install and then root with superSU ?
Except for the installation process.
Hi,
I think I found a bug:
I'm using my phone a lot with a headset, but the mic doesn't seem to work anymore (had the same issue with a custom rom a while ago, but it was working fine on cm7)
Anyone who can confirm the issue?
Sent from my HTC Desire S using xda app-developers app
what's happening?still no link
Latest versions: GB H1N1v1.0 (in 2nd post) / ICS H1N1v5.8a (updated: 2013.04.16)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ICS H1N1v5.8a ROM released (Andorid 4.0.4 with Aroma™ installer*)
*if you updated your phone to ICS with OTU, you have ICS bootloader, follow Aroma™ installer instructions
Code:
[LIST]
[*][B]Changelog:[/B]
[B]- [/B]Aroma installer
- BASE ROM: Android 4.0.4 build:175
(T-mobile HUN, 2012.12.15 update - same as 2013.01 FR)
- Trebuchet instead JRD launcher
- time server set to EU (instead asian...)
- deodexed apk's, fixed mms.apk
- res.apk files merged
- recompiled system apps
- removed unnecessary apps
- updated google play, gmail
- removed stuffs from startscreen
- camera bitrate higher, save 100% quality JPEGs
- camera use mp4 container instead 3gp, 8Mbit
- removed unnecessary lib files
- symlinked files fixed
- prerooted, added busybox
[/LIST]
[LIST]
[*][B]Build.prop mods:
-[/B] disabled error logging
- proximity sensor fix (black screen when call)
[/LIST]
[LIST]
[*][B]Kernel:[/B]
[B]- [/B]new 995S kernel
- 382MB available RAM for system
- CPU OC up to 1.95GHz (at your own risk!)
- GPU OC up to 320MHz (at your own risk!)
- undervoltage
- [SIZE=3]governors: SmartassV2,Interactive,InteractiveX,Intellidemand,Ondemandx,Lulzactive[/SIZE]
- new I/O scheduler: Deadline
- unlocked bootloader (for ICS/GB)
[/LIST]
Known bugs:
- If you OC'd yor CPU, "restore factory settings" from menu can't working (only button HR - long power+volumeUp) If you want to use that function, revert to 1,4GHz with ondemand governor than reboot phone.
Installation instructions1., Download ICS H1N1v5.8a ROM file
2., Copy ICS_H1N1v5.8a.zip to SDcard
3., Download CWM_ICS package (if you have ICS bootloader) or this CWM_GB package (if you have GB bootloader), extract it then turn on phone in fastboot mode - power on+volume down + connect USB cable to phone and run "fastboot load.bat"
4., MAKE BACKUP if needed, all partitions will be wiped. (excl. SD card)
5., Install zip from sd card menu then select ICS_H1N1v5.8a.zip and follow instructions
Recommendations- I personally recommend to use Seeder (latest apk 2.0 ATM)
!!!HOTFIX!!!- none ATM
All credits to bagyusz and Heimdallr75 from Prohardver!
If you don't like ICS, because of bad camera or other, downgrade is available!
GB H1N1v1.0 ROM released (Android 2.3.6 with Aroma™ installer*)
*if you updated your phone to ICS with OTU, you have ICS bootloader, follow Aroma™ installer instructions
Code:
[LIST]
[*][B]Changelog:[/B]
[B]- [/B]Aroma installer
- BASE ROM: Android 2.3.6 v61L
(T-mobile HUN, latest 2.3 update)
- res.apk files merged
- CPU OC from menu
- CRT animations
- removed unnecessary apps, scripts
- updated google play, gmail, youtube
- new media sounds added
- removed stuffs from startscreen
- camera bitrate higher, save 100% quality JPEGs, h264/mp4 tweaks
- prerooted, added busybox
- added seeder
[/LIST]
[LIST]
[*][B]Build.prop mods:
-[/B] disabled error logging
- proximity sensor fix (black screen when call)
- add energy saving
- disabled ring delay
[/LIST]
[LIST]
[*][B]Kernel:[/B]
- 380MB RAM for system
- IO tweaks
- deadline governor
- overclock up to 1.95Ghz (at your own risk!)
- undervoltage
- able to work with ICS bootloader for DOWNGRADE :good:
[/LIST]
Known bugs:
- If you OC'd yor CPU, "restore factory settings" from menu can't working (only button HR - long power+volumeUp) If you want to use that function, revert to 1,4GHz with ondemand governor than reboot phone.
- Need to select default keyboard at first start
Installation instructions1., Download GB H1N1v1.0 ROM file
2., Copy 2.3.6_H1N1v1.0.zip to SDcard
3., Download this CWM_ICS package (if you have ICS bootloader) or this CWM_GB package (if you have GB bootloader), extract it then turn on phone in fastboot mode - power on+volume down + connect USB cable to phone and run "fastboot load.bat"
4., MAKE BACKUP if needed, all partitions will be wiped. (excl. SD card)
5., Install zip from sd card menu then select 2.3.6_H1N1v1.0.zip and follow instructions
Recommendations- If ROM cant boot after installation or stop at bootlogo, double check your actual bootloader then select correct
- If animations are "lagging", disable it from menu (settings/screen settings/animations)
!!!HOTFIX!!!- nothing at the moment
All credits to bagyusz and Heimdallr75 from Prohardver!
If you able, support the developers. :good:
Re: [ROM][OT-995][2.3/4.x] H1N1 ROM (from bagyusz&Heimdallr75)
Kudos guys. I don't like Alcatel firmware cause I always have issues with it, but YOU guys are frigging great. I'm using mrcheeses tweaked version of your rom at the moment. Its great. Keep up the good work. I think for most users you guys are needed. :thumbup:
Sent from my ALCATEL_one_touch_995 using xda premium
Re: [ROM][OT-995][2.3/4.x] H1N1 ROM (from bagyusz&Heimdallr75)
Best from at this moment for this phone.thank you Hungary
Sent from my ALCATEL_one_touch_995 using xda app-developers app
Thanks a lot, now using mistercheese version it's just the perfect rom for me thanks again
It's really great rom, thanks for all.
Update
Hello all!
H1N1ICS v5.3 full installer
Updated Changelog:
-Fixed launcher
-ICS icon pack installed
-Flash menu is also available for recovery
-Recovery can be installed in the appropriate bootloader when selecting
-Before installation, the installer flavor was doing a full wipe, so do not have to do it manually
-Fixed GPS
Re: [ROM][OT-995][2.3/4.x] H1N1 ROM (from bagyusz&Heimdallr75)
Launcher is not fixed.there is a problem.some pic is showing during drawer transition.
Sent from my ALCATEL_one_touch_995 using xda app-developers app
ICS H1N1v5.3?
5.2 is OK with fix.
Re: [ROM][OT-995][2.3/4.x] H1N1 ROM (from bagyusz&Heimdallr75)
Hello Comicmav.
Sent from my ALCATEL_one_touch_995 using xda premium
I have recently installed the GB H1N1 v0.9 Rom and i realized that it is consume the battery very fast. For example in 7 hours without any use, the phone is all this period in deep sleep, hat the battery 20% decreased. Is this normal with GB or could i anything make for longer lasting battery?
Also wifi tethering seems not to work so good... i get no internet connection in my Laptop, when i use the OT-995, but it works good when i use an other mobile phone.
Thanks!!
i will always prefer a 5.3 instead of a 5.2+fix
V5.3 is nice guys.. if i can help or assist u with anything just let me know
btw if hot boot in reboot menu doesnt work u need to symlink pkill to busybox
i'm just curious... icons are alcatel's or you changed it?
currently i'm on pac rom and i'm satisfied with it but all the nice feedback for H1N1 V5 tempts me to flash it
Greetings,
Comicmav said:
Hello all!
H1N1ICS v5.3 full installer
Updated Changelog:
-Fixed launcher
-ICS icon pack installed
-Flash menu is also available for recovery
-Recovery can be installed in the appropriate bootloader when selecting
-Before installation, the installer flavor was doing a full wipe, so do not have to do it manually
-Fixed GPS
Click to expand...
Click to collapse
is this an official release from the H1N1 group?
Just can't seem to flash it correctly I used the CWM provided in the OP post and also tried touch cwm and 6.0 but every time it keeps stuck at the splash screen. Doesn't matter which Bootloader/batter/animation/(the video improvment thingy) i try...
Hylix said:
Just can't seem to flash it correctly I used the CWM provided in the OP post and also tried touch cwm and 6.0 but every time it keeps stuck at the splash screen. Doesn't matter which Bootloader/batter/animation/(the video improvment thingy) i try...
Click to expand...
Click to collapse
My CWM and the 5504 one should work with this ROM.
i've installed it with my linked /custpack touch version and it worked fine.
It may very well be a hickup on the cache, have you wiped everything before installing? I have absolutely no idea why it would matter but for some reason /cache is messing with installation scripts based on Aroma. Now the need for an Aroma installer is not there for me so i just wiped it out and used the updater to install it without wiping data.
Jinxxed said:
My CWM and the 5504 one should work with this ROM.
i've installed it with my linked /custpack touch version and it worked fine.
It may very well be a hickup on the cache, have you wiped everything before installing? I have absolutely no idea why it would matter but for some reason /cache is messing with installation scripts based on Aroma. Now the need for an Aroma installer is not there for me so i just wiped it out and used the updater to install it without wiping data.
Click to expand...
Click to collapse
I wiped everything. Also it seemed that my GPU overheated on the PAC rom so I wanted to go back to a ICS rom just incase.
However it seems like I can't flash a ICS rom. Older version of H1N1 don't seem to work and the ICS+ from mistercheese also fails to boot....
(PAC still boots flashes)
Also after some inspection it seems like the Aroma installer takes a bit long on the Boot Partition or something.
Hylix said:
I wiped everything. Also it seemed that my GPU overheated on the PAC rom so I wanted to go back to a ICS rom just incase.
However it seems like I can't flash a ICS rom. Older version of H1N1 don't seem to work and the ICS+ from mistercheese also fails to boot....
(PAC still boots flashes)
Also after some inspection it seems like the Aroma installer takes a bit long on the Boot Partition or something.
Click to expand...
Click to collapse
I'd restore that one before i attempted a new install, just use OTU to restore it to factory and then fastboot flash recovery cwm-yaydyaydyd.img and flash the ROM from there.
You can also try to flash the boot.img with fastboot or just boot the boot.img with fastboot boot yayayay.img
You didn't dd anything after i told you i successfully used dd, did you? because that may be the cause and you really shouldn't do that.
Actually, never dd anything EVER unless it's in my multiboot script or i'm asking you to do it.
GThrill ROM for JIAYU G3
The latest version GThrill ROM is based on "CM10" rom from needrom.com. I have applied some tweaks, removed some apps, added some and added option for the selection of EN (ph, us) language. The original purpose was for personal use, but I thought to share it, in case anyone wants to try.
DISCLAIMER
I SHALL NOT BE HELD LIABLE FOR ANYTHING THAT MAY HAPPEN.
SOME IMAGES/LOGOS/FILES/TWEAKS ARE NOT MY CREATION. THEY ARE OWNED AND CREATED BY THEIR RESPECTIVE OWNERS AND CREATORS.
THERE'S NO INTENTION WHATSOEVER TO INFRINGE ANY I.P. RIGHTS.
IF YOU FIND ANYTHING IN THIS POST THAT SHOULD NOT BE HERE, PLEASE LET ME KNOW. I'LL BE HAPPY TO DELETE THEM IF DEEMED VALID.
LIKEWISE, IF YOU FEEL THAT YOUR NAME NEED TO BE MENTIONED HERE, DO LET ME KNOW AS WELL, AND I'LL BE HONORED TO ADD IT.
USE AT YOUR OWN RISK!
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Boot Splash/Logo and Boot Animation Video
- http://www.youtube.com/watch?v=T2d3PgAarA0
NOTES
This thread assumes that your JIAYU G3 is rooted and have a working recovery (CWMR/TWRP).
If your phone is not rooted, b1nary's rooting method works with G3, provided that you have working ADB driver and installed for for it.
Here's the link to b1nary's rooting method: Root MANY ANDROID!
Click to expand...
Click to collapse
GThrill Version 3.0
Features
- based "CM10" which I got from needrom.com post
- Jellybean 4.1.2
- system/framework zipaligned
- init.d support
- zipalign on the fly (script by Wes Garner)
- slim and light: removed unwanted apps
- host file (to block known ad servers/hosts)
- some build.prop tweaks from different sources
- contains some line from V6 supercharger script (by zeppelinrox, particularly kernel tweaks)
- Jellybean Keyboard (SWIPE feature)
- Google Chrome browser (bundled stock browser FCs)
- Language: English and Chinese (some other language can be selected from Settings but i'm not sure if they are completely translated)
Download
- http://d-h.st/xzo
Click to expand...
Click to collapse
GThrill Version 2.1
Features
- version 2.1 is just a maintenance release. it's basically the same as v2.0 with fix to reported Google Chrome issue
- if you are already using GThrill v2.0, no need to upgrade to 2.1, just install the fix for Google Chrome issue
Download
- http://d-h.st/huR
Click to expand...
Click to collapse
GThrill Version 2.0
Features
- based on LEWAOS for JIAYU G3 22.Feb release (http://bbs.lewaos.com)
- Jellybean 4.1.2
- system/framework zipaligned
- init.d support
- zipalign on the fly (script by Wes Garner)
- slim and light: removed unwanted apps (i.e. virus scanner, etc.)
- host file (to block known ad servers/hosts)
- some build.prop tweaks from different sources
- contains some line from V6 supercharger script (by zeppelinrox, particularly kernel tweaks)
- Jellybean Keyboard (SWIPE feature)
- Google Chrome browser (replaced chinese browser)
- Google splash logo, NEXUS Jellybean bootanimation
- Language: English (default), Chinese
Download
- http://d-h.st/JK2
Google Chrome Problem
- A reported problem when launching Google Chrome has been verified
- Here's the fix: http://d-h.st/AYQ
- This fix is to be applied via CWM/TWRP
Click to expand...
Click to collapse
Flashing instructions
As a safety precaution, always make a backup before flashing
1) Download the zip file and put in SD card
2) Boot to recovery mode (CWM, TWRP or Lewa Rec)
3) Flash the zip file you (from #1)
4) (optional, but highly recommended!) Do a factory reset
5) Reboot
6) Once you see the lock screen on first boot after the update, let it set for 1min (to fully settle the update)
7) Unlock and setup things (esp. if you did factory reset)
8) Restart
Click to expand...
Click to collapse
ClockWorkMod Recovery / TeamWin Recovery Project / LewaRec
CWM Recovery 6.0.1.5 for JIAYU G3
- I ported it from Acer Gallant E350 by erlucky to JIAYU G3
- USB mount and adb works
- unlike Lewa Recovery, this creates backup of boot and recovery images
Download
- CWMR_6.0.1.5_JiayuG3 (by ng0tkul4).zip
How to Update
- option 1: Flash via CWMR/TWRP
- option 2: for rooted phone without TWRP/CWMR, you can extract .img file from the zip file, and dd it to /dev/recovery
-
Click to expand...
Click to collapse
Lewa Recovery 2.0 for JIAYU G3
- English verion (translated/converted/moded by me)
- USB mount and adb works
- Original post: LeWa Recovery 2.0 English version
Download
- LewaRecovery2.0 (ENtranslated_by_ng0tkul4).zip
How to Update
- option 1: Flash via CWMR/TWRP
- option 2: for rooted phone without TWRP/CWMR, you can extract .img file from the zip file, and dd it to /dev/recovery
-
Click to expand...
Click to collapse
Boot/Splash Logos for JIAYU G3
DISCLAIMER
Logos, images and trademarks are copyright of their respective owners.
I take no credits for any of these. For personal use only. I just packaged them
as installable boot/splash logos for our G3! Use at your own risk.
Lamborghini
- download
- screenshot
The Punisher (1)
- download
- screenshot
The Punisher (2)
- download
- screenshot
White Google
- download
- screenshot
Colored Google
- download
- screenshot
If you want to go back to original JIAYU stock logo, here's stock boot logo
How to install
- Flash via CWM/TWRP recovery
Click to expand...
Click to collapse
Fonts for JIAYU G3
Each (flashable) zip file contains text file license specific to the font it carries, except for RoseMary and Storopia
(feel free to PM if you feel that those need not be included here). I was not ablt to take screenshots before I let go
of my G3, but I've tested all these fonts with G3
!PaulMal
ActionMan
Amaranth
Arimo
CabinSketch
Diavlo
Exo
Gapstown
Komika
Laconic
LuxiSans
Orbitron
SourceSans Pro
Ubuntu
VeggieBurger
RoseMary
Storopia
How to install
- Flash via CWM/TWRP recovery
Click to expand...
Click to collapse
Credits
Other credits/Special Thanks:
- LewaOS for the LewaOS and Lewa Recovery
- clockworkmod for the CWMR
- TeamWIN for the TWRP (Lewa Recovery)
- erlucky for CWMR 6.0.1.5 for Acer E350
- b1nary for his rooting method that works with G3
- ankadnikov/kadan for his LogoBuilder for MTK phones
- bgcngm/Bruno Martins for his MTK unpack/repack scripts
Click to expand...
Click to collapse
First of all tkank you for the development of this awsome rom. I don´t know if what I´m asking is possible, but why don´t you contact JDStar, who has developed another multilanguage lewa rom and ask him for permissions to add the tranaslations to your rom? This is the link to his rom:
http://forum.xda-developers.com/showthread.php?t=2162425
hugoglezp said:
First of all tkank you for the development of this awsome rom. I don´t know if what I´m asking is possible, but why don´t you contact JDStar, who has developed another multilanguage lewa rom and ask him for permissions to add the tranaslations to your rom? This is the link to his rom:
http://forum.xda-developers.com/showthread.php?t=2162425
Click to expand...
Click to collapse
Thanks for bringing this up. Will try to contact him when i get the time... or he can use this as the base.
Nice work bro, keeping our G3 updated :highfive:
added flashable logos
coming up shortly... fonts.
JDStar, has shared some translations for lewa rom 4.1, It would be great if you could make also flashable zips to add some languages. Here´s the link http://androidtranslator.etomaszow.eu/ . Thank you for your efforts and please keep up the good work!!! :good:
splash logo
First of all Thanks for the Roman. Can I know how to flash back the original jiayu splash logo. I would like to have jiayu logo. Thanks
kvpaul said:
First of all Thanks for the Roman. Can I know how to flash back the original jiayu splash logo. I would like to have jiayu logo. Thanks
Click to expand...
Click to collapse
i have uploaded the original/stock JIAYU splash logo
just flashed the Lewa Gthrill, tnx newbie
- LED indicator ok, BTW I noticed that ICS version has 3 Color indicator R-G-B
- wifi/ data/ GPS is ok
- nice music player w/ artist & lyrics (internet needed)
- stock lockscreen not sensitive, must touch a few times, changed to pattern seems ok
- Theme chooser always FC
- some apps, wechat, chikka, text. sometimes suddenly just close
- still testing the batt. life
- so far so good
with Nova Launcher
Netflix App
Thanks for uploading the stock splash logo. I like this rom, but what I am looking is to run netflix app. Netflix will work on ics but in none of the JB roms. Do you know how to make running the netflix app.?
Thanks
CMW recovery flashed but no go
Hi there,
I tried to get into the newly flashed CWMR but somehow I've failed. What I've done is use mobileuncle tools to get into CWM 5 and from there flash the zipfile I've downloaded from the sources. Now the CWM app does boot into recovery but I get this little android figure with a ! from it's belly. Not good I suppose.
I'd realy like to try out this rom but without working recovery I'm a bit scared I'm going to brick the thing....
Could you please advise??
Greetings,
Andreas
i use gthrill for a couple of days and the only problem i have is that when i open the wifi after some time the signal in one of my two sim drop....
i have it in all roms i try...
Installed last night.
Looks nice, work fine, stable. Well done
I have only one issue.
USB won't work.
When Jiayu is connected to PC, USB storage is not recognised. Any solution for this?
andreasheijdendael said:
Hi there,
I tried to get into the newly flashed CWMR but somehow I've failed. What I've done is use mobileuncle tools to get into CWM 5 and from there flash the zipfile I've downloaded from the sources. Now the CWM app does boot into recovery but I get this little android figure with a ! from it's belly. Not good I suppose.
I'd realy like to try out this rom but without working recovery I'm a bit scared I'm going to brick the thing....
Could you please advise??
Greetings,
Andreas
Click to expand...
Click to collapse
boot into normal Android and run MTKTools again and flash CWMR... this time, do it three (3) times in a row, before rebooting.
Hamacio said:
Installed last night.
Looks nice, work fine, stable. Well done
I have only one issue.
USB won't work.
When Jiayu is connected to PC, USB storage is not recognised. Any solution for this?
Click to expand...
Click to collapse
i'm not sure, may be you need correct drivers installed to your pc.
try using different USB port of your PC
ng0tkul4 said:
i'm not sure, may be you need correct drivers installed to your pc.
try using different USB port of your PC
Click to expand...
Click to collapse
Drivers are ok. Tried every single port. Worked fine 2 days ago - Jiayu was with ICS 4.0.4.
Not recognised as a mass storage.
dd rules!
ng0tkul4 said:
boot into normal Android and run MTKTools again and flash CWMR... this time, do it three (3) times in a row, before rebooting.
Click to expand...
Click to collapse
Didn't work. Got it working using the dd method (way easier if you ask me ).
Now, I've installed CWM 5.5.0.4 in /dev/recovery but when trying to flash the zip file for the LewaOS rom it gives me 'cannot open file'. Is that because I need the newer version of CWM mentioned in the opening post? Or just something else? Perhaps because there's 'spaces' in the filename? I'll let you know if I find something out there !
** Update **
I downloaded the correct rom but still no go It just doesn't want to install the rom...
Hamacio said:
Drivers are ok. Tried every single port. Worked fine 2 days ago - Jiayu was with ICS 4.0.4.
Not recognised as a mass storage.
Click to expand...
Click to collapse
Hi
Reflashed again.
Everything is fine.
I think is slower than original ICS 4.0.4 ROM, but stable and good.
Keep up good work!
***Update:***
Battery life much improved, at least 15-20%
I found this ROM very good so far.
There's only small issue with some mobile web sites. Some of the links cannot be open.
I've installed Opera browser in addition but is exactly the same so
I'm not sure: maybe there is a problem in ROM or badly written mobile web sites.
Thanks a lot
AVD Rom Based Stock 11.2.A.0.31
Code:
[B][U]Disclaimer [/U][/B]
Everything on XDA Developers is tried by your own choice and own free will.
We are not responsible in the unlikely case your device gets bricked damaged.
Or in the very unlikely case your device turns into a deceptacon
and takes over the world.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please Do Not Mirror Any Of Our Files
Here I present AVD Rom which is stock based. packed with extra features and tweaks. It is all most lag free fast & fluid ui. AVD Is Now A Dark Moon Team Project I hope you all enjoy what sony should have given us If any of you can't post on the thread then please post here: http://forum.xda-developers.com/showthread.php?p=46225513#post46225513 and me or one of the senior members will answer please do not pm me.
Features:
- PreRooted
- Completely Deodexed
- All apks zipaligned
- BusyBox PreInstalled
- 100% SuperCharged
- init.d Support (run your favorite shell scripts on stock kernel)
- ext_card Mounted As sdcard
- Removed some Un Needed apps
- New Lockscreen
- New conversations
- New Honami Framework
- New boot animation - AVD Customed
- Xperia V Keyboard
- New Album & Movies
- Xperia Z wallpapers
- Xperia Z Ultra Walkman
- Small Apps
- Flashgordon app flash zips without a recovery Used At Your Own Risk!
- semcnotes.apk
- New Calculator
-New Honami Home Launcher
-DoCoMo System Ui
Plus much more.
Screen Shots
Locked Bootloader Installation Instructios
I recomend staring on rooted .31 firmware. Make a nandroid backup before you do anything
1a) download rom zip & ftf file place rom zip on the root of sdcard not in a folder.
2)Download & install CWM from here http://forum.xda-developers.com/showthread.php?t=2333078 the jb kernel to reflash is .21 FW just flash my kernel ftf.
3) Boot into CWM wipedata/factory reset wipe cache partition Navigate to Advanced wipe Dalvik cache
4) Next navigate to mounts & storage format/system (ONLY SYSTEM)
5) Next go to install zip from sdcard. Then Choose zip from sdcard. Find my AVD Rom V1.x.zip install.
6) When Installation has finished navigate back to advanced and choose fix permitions
7) After that take the battery out for at least 10 seconds[/COLOR] (NOOB'S DO NOT LET THE PHONE BOOT UP AS THE ICS KERNEL IS STILL INSTALLED YOU WILL GET A BRICK)
7) Take out battery Flash my kernel ftf or you can use vengeance kernel.
8) Open flashtool drag my Stock Kernel ftf file you downloaded into the flashtool window when files have finished preparing connect phone in flashmode (hold vol- key while connecting usb) when its finished flashing reboot. Enjoy.
Click to expand...
Click to collapse
Unlocked Bootloader Installation Instructions
1) Download rom zip, ftf & Addon if you want it. place Rom & Addon zip on externel sdcard
2) Fastboot CM10 kernel for CWM. Boot into CWM
3) Wipe data/factory reset, wipe cache partiton, go to advanced wipe dalvik cache. then go to mounts & storage format system.
4) Go to install zip from sdcard choose zip from externel sdcard. flash rom.
5) when installation is finished go back to advanced choose fix permissions.
6) Next take out battery open flashtool & flash my kernel ftf
7) Reboot device. Enjoy
Click to expand...
Click to collapse
Addon Installation Instructions
1) Boot to CWM by the instructions for you bootloader status in first instrutions
2) Wipe cache partition & dalvik cache.
3) install zip from sdcard choose the addon you downloaded
4) After it has finished take out battery & flash kernel ftf then reboot.
Click to expand...
Click to collapse
Locked Bootloader Update Instructions
Install CWM as before in first installation wipe cache partition go to advanced wipe dalvik cache install rom reflash a jb kernel reboot. All done
Click to expand...
Click to collapse
Unlocked Bootloader Update Instructions
Download latest rom Flash CM10 kernel boot into CWM wipe cache partition go to advanced wipe dalvik cache then flash rom. after install has finished reflash stock kernel ftf or vengeance kernel reboot. All done
Click to expand...
Click to collapse
AVD Bug Fix Instructions
1) Download the fix AVD 1.6V zip from atachments
2) Extract/unpack the zip to your sdcard
3) With you favorite root browser push systemui.apk to /system/app give permissions rw-r-r
4) push framework.jar to system/framework give permissions rw-r-r
And your all done.
Click to expand...
Click to collapse
Downloads:
AVD Rom Latest Release: https://mega.co.nz/#!OhYmVQLb!D4Qt1Hy9gsEgfiFbIKfDeiUWW78RIo-oNTonuCssWHk
Latest Release Mirror: http://www.4shared.com/zip/49nmRBKa/AVD_RomV16.html
Addon Archive: http://www.mediafire.com/folder/23macj2g9sx60/AVD_Addons
Rom Archive: https://mega.co.nz/#F!elpjCTiT!GewDfirKrGIzwUjXO3Gt-g
Kernel ftf: https://mega.co.nz/#!KlZlSLBI!InCg31egMl8AkW2MwiQkxhkyuN9yAmlJVuTtNt1tWgM
Kernel ftf mirror: http://www.4shared.com/file/MLr0lK-k/st26i_112A031_Kernel_By_Gavste.html
Click to expand...
Click to collapse
Why Not Put One Of My AVD Banners In Your Signature
Code:
[B]Changelog:[/B]
V1.6
-Added honami framework (addon to be flashed)
-Added honami home
-Added honami themes
-Added honami system ui
-Added honami skech app
V1.5a
-Removed build prop tweaks (interfered with walkman audio)
-Walkman fixed
-Small apps fixed
-Added X-Reality (only active in album & movies)
V1.5
-Added xperia z ultra walkman
-Added new semcclock app
-Added Xperia i1 widgets
-Added Small Apps (waiting for Aeron Sagar to release system ui)
-Added new init.d scripts for performance
-Added supercharged init.rc
-Added Build prop tweaks
V1.4
-Updated framework to 2013
-slightly modded bootanimation for AVD
-Call dialer bug fixed
-New phone book (white)
-New Phone dialer (white)
-Added sony screen mirror app
-Removed R3al Launcher
-Added Aeron Sagar's Home.apk
-Removed more bloatware
-More performance tweaks
-Added 2 more shell scripts to improve performance & Stability
[COLOR="red"]Rom Is Even More Stable[/COLOR]
V1.3
-Completely rebuilt
-Xloud Fixed
-Vpt Fixed (sound enhancement bug)
-Removed More Bloatware rom is lighter
V1.2
- Album Fix
- New semc clock app
- Updated bootanimation to fit screen
- Added Xperia Link
- Added some new stock wallpapers
V1.1-
- Walkman Fix
V1.0-
-Initial Release
CREDITS-
@Aeron sagar for the use of his amazing mods thankyou my friend
@zeppelinrox for Awesome V6 SuperCharger. Original Thread: http://forum.xda-developers.com/showthread.php?p=16635544#post16635544
@androguy.fr for flashgordon
@TeamMex for sd remount tutorial
@neroyoung for tweaks
@Mata_Ratos for testing and feed back.
@saif1012 for system ui png fix
Bugs:
-Mobile data toggle does not work in notifacation draw or on power widget
-Setting up wifi in setup wizard force closes setup wizard
-Uninstalling an app shows android.acore error (does not affect anything)
-No voice typing on xperia keyboard
Click to expand...
Click to collapse
Some pics would be nice
gavster26 said:
Y U Quote Whole OP
Click to expand...
Click to collapse
The rom size only 15.6mb??
haizanlhkt said:
The rom size only 15.6mb??
Click to expand...
Click to collapse
My appologys bro all fixed
Is it a full working rom? What is better comparing to the stock one?
I'm tired to downgrade to ICS...
I can flash this even if my bootloader is locked - right ?
rexxxxx said:
I can flash this even if my bootloader is locked - right ?
Click to expand...
Click to collapse
yes its modified stock for stock kernel
Eduardo C. said:
Is it a full working rom? What is better comparing to the stock one?
I'm tired to downgrade to ICS...
Click to expand...
Click to collapse
its alot faster and more responsive and smooth
Whoohooo, first time my name appears on a ROM development!!!
But I've got to say it's really a great rom, and for the first time I'm not sad about not beeing able to unlock my bootloader. Can wait a couple more years until someone figures that one out.
Great job gavster26.
gavster26 said:
AVD Rom Based Stock 11.2.A.0.31
Click to expand...
Click to collapse
Good job bro,
This is what I have been waiting for. Downloading it as we speak.
Hope I can do the downgrade to ICS in order to give this ROM a try.
hmmm..
gavster26 said:
Y U Quote Whole OP
Click to expand...
Click to collapse
I'll prefer to stay using this rom -->> http://forum.xda-developers.com/showthread.php?t=2304025
because the antutu score is better -->> https://www.dropbox.com/sh/lngu0oqlzidv13f/A7O2lH7SHC :good:
zona77 said:
I'll prefer to stay using this rom -->> http://forum.xda-developers.com/showthread.php?t=2304025
because the antutu score is better -->> https://www.dropbox.com/sh/lngu0oqlzidv13f/A7O2lH7SHC :good:
Click to expand...
Click to collapse
Thats mine aswel lol. The reason that scores a little higher is because it is odexed and this one is deodexed
gavster26 said:
Thats mine aswel lol. The reason that scores a little higher is because it is odexed and this one is deodexed
Click to expand...
Click to collapse
Hahahaha..i know..that one is yours too..that's why i post my comment like that..
Ooo...i see...
But..i already on fw.31 and to use your deodex rom i have to downgrade again right.. so, i'll wait until cwm for XJ JB out.. and i'll test your deodex rom bro..
Sent from my ST26i using Tapatalk 2
I've got a problem when i install rom. In the cwm i click install zip from sdcard i choose your zip and install then CWM showed me Installation aborted (bad).Partition System is formated
ROS!U said:
I've got a problem when i install rom. In the cwm i click install zip from sdcard i choose your zip and install then CWM showed me Installation aborted (bad).Partition System is formated
Click to expand...
Click to collapse
Don't format sdcard with CWM.
Download ROM again, it could be corrupted.
---------- Post added at 05:00 PM ---------- Previous post was at 04:58 PM ----------
zona77 said:
Hahahaha..i know..that one is yours too..that's why i post my comment like that..
Ooo...i see...
But..i already on fw.31 and to use your deodex rom i have to downgrade again right.. so, i'll wait until cwm for XJ JB out.. and i'll test your deodex rom bro..
Sent from my ST26i using Tapatalk 2
Click to expand...
Click to collapse
I've already installed a previous rooted version of this rom, and now this. A few times until I got it right. From the beggining to end, maybe 30/40 minutes. It's not that long. But I really hope that someone manages to put cwm working on JB.
But you should update to this rom, since it has Flashgordon working and any changes that are made to it will be easilly flashable.
Ok I'll try once again
Mata_Ratos said:
Don't format sdcard with CWM.
Download ROM again, it could be corrupted.
---------- Post added at 05:00 PM ---------- Previous post was at 04:58 PM ----------
I've already installed a previous rooted version of this rom, and now this. A few times until I got it right. From the beggining to end, maybe 30/40 minutes. It's not that long. But I really hope that someone manages to put cwm working on JB.
But you should update to this rom, since it has Flashgordon working and any changes that are made to it will be easilly flashable.
Click to expand...
Click to collapse
I could probley port a CWM but i dont have a linux laptop im saving up for one but it will take quite a while plus id like to port cm10.1 for locked bootloader but again i have to wait for a linux laptop.
Poland has got method for the cwm for JB Well i installed this rom and i liked this....fast, light, smooth a few of the applications,all mods in one Great JOB gavster!!!!
gavster26 said:
I could probley port a CWM but i dont have a linux laptop im saving up for one but it will take quite a while plus id like to port cm10.1 for locked bootloader but again i have to wait for a linux laptop.
Click to expand...
Click to collapse
Really looking forward to the CWM for JB as I have not been able to downgrade to ICS.
Sent from my ST26i
nakTT said:
Really looking forward to the CWM for JB as I have not been able to downgrade to ICS.
Click to expand...
Click to collapse
why ages ? is it not just flashing with flashtool an old firmware ? around 5 min ???