[UPDATED] [How To] P5100 Upgrade to P5100XXCLI1 Jelly Bean OTA + CWM + Root - Galaxy Tab 2 10.1" Android Development

First of all, I am not to be held responsible for any damage this may do to your device.
This guide assumes that you know what you are doing (NOT FOR BEGINNERS). I would advise the newbies to do a lot of research and read up on the basic and advanced "HOW TOs" which are all available on xda-developers and a lot of other forums before asking questions about stuff you should already know before attempting a procedure like this. That being said, I WILL NOT RESPOND TO THESE TYPES OF QUESTIONS.
NOTES:
This procedure is only for the P5100
This procedure was performed under Windows 7 Ultimate 64-bit with all required drivers installed
This procedure will not lock your device to Globe Philippines
This procedure will wipe your device including the Internal Storage
You will require a micro-SD card with at least 1GB free space
You must follow the instructions to the letter
You may opt to backup your device before performing this procedure
Instructions:
1. Download the following files:
ODIN: http://www.mediafire.com/?lh0batz9fjaalps
Original P5100 Stock Philippine ROM: http://www.hotfile.com/dl/165239219/07f45f2/P5100XWALE2_P5100OLBALE1_XTE.zip.html
P5100 Required Philippine OTA: http://www.hotfile.com/dl/170852899/ad44bcc/GT-P5100_P5100XXBLI2-OTA-P5100XWALE2_GLB_268219552.zip.html
P5100 Jelly Bean Philippine OTA: http://www.hotfile.com/dl/171436333/2f6f89a/GT-P5100_P5100XXCLI1-OTA-P5100XXBLI2_GLB_279272235.zip.html
ClockworkMod Touch Recovery 6.0.1.2: https://docs.google.com/file/d/0B02Uc9IrgGXQZjAxRUhtMW96NUk/edit?pli=1#
SuperSU: http://download.chainfire.eu/212/SuperSU/CWM-SuperSU-v0.96.zip
2. Copy the following files (which you downloaded from Step 1) to the root of your micro-SD card:
GT-P5100_P5100XXBLI2-OTA-P5100XWALE2_GLB_268219552.zip
GT-P5100_P5100XXCLI1-OTA-P5100XXBLI2_GLB_279272235.zip
CWM-SuperSU-v0.96.zip
3. Boot your device into download mode and connect it to your computer
4. Unzip the file P5100XWALE2_P5100OLBALE1_XTE.zip (it will unzip to P5100XWALE2_P5100OLBALE1_P5100DXLD3_HOME.tar.md5)
5. Start ODIN, click the PDA button and select the P5100XWALE2_P5100OLBALE1_P5100DXLD3_HOME.tar.md5 which was unzipped in Step 4, then click the Start button and wait until it finishes and reboots your device
6. Disconnect your device from your computer and boot it into download mode again, then reconnect it to your computer
7. In ODIN, click the Reset button, uncheck the Auto Reboot button then click the PDA button and select the GT-P5100_ClockworkMod-Touch_recovery_6.0.1.2.tar file which was downloaded in Step 1, then click the Start button and wait until it finishes, then power down the device.
8. Disconnect your device and boot it into recovery mode (you will now have CWM Touch 6.0.1.2 installed in place of the stock recovery)
9. Flash the OTAs and SuperSU with CWM in the following order:
GT-P5100_P5100XXBLI2-OTA-P5100XWALE2_GLB_268219552.zip
GT-P5100_P5100XXCLI1-OTA-P5100XXBLI2_GLB_279272235.zip
CWM-SuperSU-v0.96.zip
10. Perform a wipe/factory reset in CWM then reboot your device (please take note of step 11)
11. When you select reboot system now, it will ask you if you want to fix the issue of overwriting CWM with the stock recovery, select YES (This step is necessary to retain CWM under a stock ROM)
12. When your device boots up, proceed by setting it up as you do normally
If all goes well, you now have the latest Stock Jelly Bean OTA for your P5100 which will be rooted and have CWM as your recovery.
CREDITS:
Egooktamuck: GT-P5100_ClockworkMod-Touch_recovery_6.0.1.2.tar
Chainfire: SuperSU
SamMobile: All the firmwares
UPDATE:
I re-flashed but in the following order, and included the PIT file in Odin, and the volume is now fixed, I already performed the operation successfully on two more P5100s:
1. Wipe the entire device (factory reset)
2. Flash P5100XWALE2_P5100OLBALE1_P5100DXLD3_HOME.tar.md5 with Odin while also using signed_espresso_20120220_16G.pit
3. Boot normally and setup the device as you would
4. Flash GT-P5100_P5100XXBLI2-OTA-P5100XWALE2_GLB_268219552.zip in stock recovery and boot up normally
5. Flash GT-P5100_P5100XXCLI1-OTA-P5100XXBLI2_GLB_279272235.zip in stock recovery and boot up normally
6. Flash GT-P5100_ClockworkMod-Touch_recovery_6.0.1.2.tar with Odin but with no PIT file
7. Flash CWM-SuperSU-v0.96.zip with CWM then select fix stock recovery when rebooting from CWM

what knows issues that appear ? or bugs ?

Can anyone who has upgraded let me know what is the total ram in task manager....currently on ics its 687 i think....
Sent from my GT-P5100

Any screenies
Sent from my GT-P5113 using XDA Premium App

mab71 said:
Can anyone who has upgraded let me know what is the total ram in task manager....currently on ics its 687 i think....
Sent from my GT-P5100
Click to expand...
Click to collapse
Task Manager shows 685MB

ZeroXtreme said:
Task Manager shows 685MB
Click to expand...
Click to collapse
Thanks....do feel any slowdown?
Sent from my GT-P5100

mab71 said:
Thanks....do feel any slowdown?
Sent from my GT-P5100
Click to expand...
Click to collapse
One word to describe - Awesome.
Sent from my GT-I9100 using Tapatalk 2

SMASHERSONLY said:
Any screenies
Sent from my GT-P5113 using XDA Premium App
Click to expand...
Click to collapse
Attached a screenshot to the OP

mab71 said:
Thanks....do feel any slowdown?
Sent from my GT-P5100
Click to expand...
Click to collapse
Actually, no. No lag or slow down. Way snappier compared to the ICS ROM.

does it have the phone and messaging feature ?

theelitekiller said:
does it have the phone and messaging feature ?
Click to expand...
Click to collapse
Obviously have. Because this is P5100 rom
Sent from my GT-I9100 using Tapatalk 2

New OTA!
Version: 4.1.1
Country/carrier: Germany (DBT)
New PDA: P5100XXCLI3
Needed PDA: P5100XXBLH4
Download

this is not 4.1.1 but 4.0.4 Sorry.

i did all the steps but i didnt do wipe data, so now i have jelly bean with root and cwm without losing my apps.

I've updated to the latest german JB rom.... noticed that in portrait mode, scrolling in homescreen and app drawer has some stutters....anyone have this too?? In landscape, smooth as butter
Sent from my GT-P5100

LuffarJoh said:
New OTA!
Version: 4.1.1
Country/carrier: Germany (DBT)
New PDA: P5100XXCLI3
Needed PDA: P5100XXBLH4
Download
Click to expand...
Click to collapse
Hi, can i use it with my p5110?
Regards,
Mgl2
Sent from my GT-P5110 using xda app-developers app

mab71 said:
I've updated to the latest german JB rom.... noticed that in portrait mode, scrolling in homescreen and app drawer has some stutters....anyone have this too?? In landscape, smooth as butter
Sent from my GT-P5100
Click to expand...
Click to collapse
Did you a Wipe, Reset or stuff like that after flashing the firmware?
maybe it will help with stutters.
what did you use to upgreade to JB? OTA update? Zip-flash? odin?

solitsnake said:
Did you a Wipe, Reset or stuff like that after flashing the firmware?
maybe it will help with stutters.
what did you use to upgreade to JB? OTA update? Zip-flash? odin?
Click to expand...
Click to collapse
Yes, did a wipe. First used odin to flash the needed base. Wiped everything, Then used stock recovery to flash the ota JB file..which JB rom r you using? Now there are 2 I think....phillipines and german
Sent from my GT-P5100

theelitekiller said:
i did all the steps but i didnt do wipe data, so now i have jelly bean with root and cwm without losing my apps.
Click to expand...
Click to collapse
Good to hear it worked for you this way. I just specified a wipe to guarantee no issues arise due to a non-wipe upgrade.

mab71 said:
Yes, did a wipe. First used odin to flash the needed base. Wiped everything, Then used stock recovery to flash the ota JB file..which JB rom r you using? Now there are 2 I think....phillipines and german
Sent from my GT-P5100
Click to expand...
Click to collapse
There three. The others is India
Sent from my GT-I9100 using Tapatalk 2

Related

[ROM][P6200L][3.2][VJKL4] Stock - BRAZIL

Warning: I am not responsible if loading this rom hard bricks your tab. Install this at your own risk.
This is a official rom and stock. :laugh:
Odin + .pit file.
http://www.4shared.com/rar/ShRHf_QA/Odin3v185.html
ROM
http://www.4shared.com/rar/8F0WIp9H/P6200L_STOCK_VJKL4_REV_04_FIRM.html
Seeya!
Obrigado.
Ilana-Br said:
Warning: I am not responsible if loading this rom hard bricks your tab. Install this at your own risk.
This is a official rom and stock. :laugh:
Odin + .pit file.
http://www.4shared.com/rar/ShRHf_QA/Odin3v185.html
ROM
http://www.4shared.com/rar/8F0WIp9H/P6200L_STOCK_VJKL4_REV_04_FIRM.html
Seeya!
Click to expand...
Click to collapse
Dear friend, thank you, worked perfectly on my now returned to the same rom that came on the device. and a pity that there are no custom rom that are worth using, I'll wait even ics official, it comes up.
Retail ou de operadora.
Obrigado
Sent from my GT-P6200L using xda app-developers app
fefopumper said:
Retail ou de operadora.
Obrigado
Sent from my GT-P6200L using xda app-developers app
Click to expand...
Click to collapse
Rom retail, (stock) no customizations!
Seeya!
fwtj said:
Dear friend, thank you, worked perfectly on my now returned to the same rom that came on the device. and a pity that there are no custom rom that are worth using, I'll wait even ics official, it comes up.
Click to expand...
Click to collapse
Yes, I don't like of using custom roms too, because has many bugs.. maybe in the future be better.
In this moment I'll waiting the ICS too, next month maybe starts the update to our device.
Seeya !
Como faço o flash?
Sent from my GT-P6200L using xda app-developers app
Ja resolvi, vlw...xD
Yeah ics update, wait.
very good job:good:
I hate to be a moron, but I am new to this. I just got the GT-P6200L a couple of days ago. I updated to ICS and it works perfectly, but I cannot root it. Unless I can find a way to root ICS, I am going to go back to honeycomb.
I downloaded the two zip files from the top of this thread:
http://www.4shared.com/rar/ShRHf_QA/Odin3v185.html
http://www.4shared.com/rar/8F0WIp9H/P6200L_STOCK_VJKL4_REV_04_FIRM.html
I noticed that the Odin also included a .pit file (as indicated in the original post). I do understand how to load the .pit file with Odin.
The other file (P6200L_STOCK_VJKL4_REV_04_FIRMWARE.rar) contained several files. I am not sure what to do with these files. The files are:
MODEM_P6200LVJKL4_REV_04_CL1089917.tar.md5
P6200L_APBOOT_P6200LVJLA3_CL616007_REV02_user_low_ship.tar.md5
P6200L_CODE_P6200LVJLA3_CL616007_REV02_user_low_ship_16G.tar.md5
P6200L-CSC-MULTI-ZTOLA2.tar.md5
Am I supposed to load the .RAR file into Odin? Or, am I supposed to load one or more of the .md5 files into Odin?
If someone could give me a better idea about what to do with these files, it would be much appreciated.
My current config is:
Model number: GT-P6200
Android version 4.0.4
My current baseband version is: P6200XXLQ1
Kernel Version: 3.0.15-P6200XXLQ1-CL776352 [email protected] #3 SMP PREEMPT Mon Jun 25 14:42:23 KST 2012
Build number: IMM76D.XXLQ1
Thank you very much for any help you can provide!
http://forum.xda-developers.com/showthread.php?t=1367249
Sent from my GT-P6200 using xda app-developers app
Campello said:
http://forum.xda-developers.com/showthread.php?t=1367249
Sent from my GT-P6200 using xda app-developers app
Click to expand...
Click to collapse
Thank you. Tried that one already, too. No joy.
I'm ready to go back to honeycomb. I've tried so many different root methods that I've lost count. I get the same error every time, regardless of the root.zip file I attempt to use.
The error message is: E: signature verification failed
Thank you for trying to help.
Dude, almost everyone had the same problem after ics upgrade, there r posts everywhere... You can use heimall, but most ppl r too stupid too install correct drivers, so i recommend mobile odin and aorth's cwm 6.0.1.0. (Rename his file to recovery.img and u r ready to go) when thats done, flash that root file with flashed cwm. Done!!!
Couple of other ways with temporary cwm but the best ways anyways is to flash aorth's cm9 after cwm. Root, is of course included.
Sent from my GT-P6200 using xda app-developers app
Bad2hold said:
Dude, almost everyone had the same problem after ics upgrade, there r posts everywhere... You can use heimall, but most ppl r too stupid too install correct drivers, so i recommend mobile odin and aorth's cwm 6.0.1.0. (Rename his file to recovery.img and u r ready to go) when thats done, flash that root file with flashed cwm. Done!!!
Couple of other ways with temporary cwm but the best ways anyways is to flash aorth's cm9 after cwm. Root, is of course included.
Sent from my GT-P6200 using xda app-developers app
Click to expand...
Click to collapse
I understand exactly what you are telling me. Thank you for your reply. From what I am reading, my GT-P6200L has to be rooted already in order to use Mobile Odin. The entire problem I am having is not being rooted. I am trying to accomplish root. Did I misunderstand something in regard to being rooted before using Mobile Odin?
Oh yeah, i forgot, ur right ^^ hear ya go: if unable to use heimdall, use temp. cwm to flash root
But why you dont just flash cm9? Ever tried it? Not many ppl here do like samsungs touchwiz bloatware, do you? Just install permanent cwm from aorth with heimdall or mobile odin after root and you r good to flash cm9. Just follow instructions in aoths thread.
ROOT AFTER ICS UPDATE
Flash with heimdall. Guide: http://forum.xda-developers.com/showthread.php?t=1508703
Code: heimdall flash --recovery recovery.img
Use aorth's img version from here:
http://forum.xda-developers.com/showthread.php?p=29077817
And rename to recovery or type full file name instead of recovery.img
Than flash root+supersu from recovery. flashable zips here:
http://goo.im/superuser and that root.zip what u already have
Or use this method here with temporary cwm touch
http://forum.xda-developers.com/showthread.php?p=28689474
Confirmed working but only temporary cwm with that way.
mashkuov said:
this is a working root for ICS :laugh:
- Download these 2 files ( CWM.zip and root.zip ) and put in your SDCARD:
- Reboot to recovery: (Hold Volume Up+Power till it reboot to recovery)
- Choose apply update from external storage.
- Choose CWM.zip and wait until CWM recovery appear.
- Once the cwm recovery appear: Touch the screen to choose and navigate the options
* This cwm recovery is only temporary cwm recovery.
Once you had install the cwm recovery, navigate and;
- Choose install zip from sdcard.
- Choose zip from sdcard.
- Choose root.zip ;and Yes - Install root.zip.
- Once done, choose reboot system now.
* Your device is rooted without permanent cwm recovery: If you don't need cwm recovery. You can stop at here.
You will find superuser app in your drawer
Click to expand...
Click to collapse
If u need permanent cwm, use aorths, linke on top, just flash with mobile odin by rename his file to recovery.img
Sent from my GT-P6200 using xda app-developers app
Have fun
Sent from my GT-P6200 using xda app-developers app
is anyone tested this new release firmware http://www.sammobile.com/firmware/?page=8&view=6301
GT-P6200L - Brazil
PDA: P6200LVJLP5
CSC: P6200LZTOLP2
Version: 4.0.4
Date: 2012-08-29
Regions:
Download
Yes, I've just flashed this FW, it's 4.0.4 and for Brazil! Running great!
FMAranda said:
Yes, I've just flashed this FW, it's 4.0.4 and for Brazil! Running great!
Click to expand...
Click to collapse
I'm currently using the Austrian 4.0.4 but am thinking of updating to this latest Brazil version.
Is it unbranded and free from any region specific extra apps?
Sent from my GT-I9300 using xda premium
Completely free, just like the ICS you're using.

CM10 galaxy tab plus how to flash ROM

Can any one tech me how to flash CM10 on galaxy tab plus from zero??
Cause when I try to flash it's got boot loop.
nopphonyel said:
Can any one tech me how to flash CM10 on galaxy tab plus from zero??
Cause when I try to flash it's got boot loop.
Click to expand...
Click to collapse
Can r u entered Download mode or Recovery mode?
Try to hold on volume up and power button until screen off then release and press power button again for enter recovery mode.
After entered Recovery mode "Wipe User Data", "Wipe Cache" and "Reboot"
If this solution cant solve a problem please try to flash your tab to Official HC and ICS with Odin then Flash to CM10 again.
Dont Wipe Data with CM Touch ,please use clockworkmod 6 for wipe data.
Yep
Sent from my GT-S5570 using xda app-developers app
meow-meow said:
Can r u entered Download mode or Recovery mode?
Try to hold on volume up and power button until screen off then release and press power button again for enter recovery mode.
After entered Recovery mode "Wipe User Data", "Wipe Cache" and "Reboot"
If this solution cant solve a problem please try to flash your tab to Official HC and ICS with Odin then Flash to CM10 again.
Click to expand...
Click to collapse
I have problem when I wipe data. it's auto reboot
Sent from my GT-S5570 using xda app-developers app
nopphonyel said:
I have problem when I wipe data. it's auto reboot
Sent from my GT-S5570 using xda app-developers app
Click to expand...
Click to collapse
R u try flash to HC ?
** If u flashed and found a boot-loop after flash HC, please follow up latest post.
Halp!
Good timing, i have a similar problem.
I was at ICS 4.0.4 rooted then decided to downgrade to HC stock to back it up (since ICS is buggy).. I flashed using odin 3v1.85 using a single file PDA: P6200DXKL3_P6200OLBKK8_P6200DXKK5_HOME.tar.md5. After flashing HC, I'm stuck at bootloop.
Then I have no choice than to flash it up from there, since I can still access recovery 3e.. Firstly i flashed CWM 6 using odin, then tried to update CM10 from my external sdcard. Then this error shows up
Installing: /emmccm-10-20120904-UNOFFICIAL-p6200.zip
Finding update package...
E: unknown volume for path [/emmccm-10-20120904-UNOFFICIAL-p6200.zip
E: Can/t mount /emmccm-10-20120904-UNOFFICIAL-p6200.zip
installation aborted.
BTW I wiped data and cache using CWM. I accidentally formatted the sdcard my real objective is to mount it then I didnt notice.
oyea, tried flashing it using touch cwm, it worked but it boot loops..then i tried acessing recovery but it just went off, and i cant turn it on.
Good thing when i charge it on an outlet the screen goes on then i went to Downloadmode again. I reflashed it back to HC via odin.
NOTE: ( MY tab is ruinned. now the screen won't turn on, only when I'm charging it as previously stated. The only thing i can access is download mode
Thanks in advance :crying: I'm at lost
I have a experiences like this. I try entered to download mode and re-flash my tab to HC with Odin then reboot a device and wipe all user data.
Finally, I'm on CM10. :victory:
Flashing back to ICS fixed the bootloop, then from there it's history!
Though I forgot to copy the cwm backup of my ICS before formatting the sdcard. Now it's gone :silly: . Anyway, it's nice to start off from scratch.
Can someone tell me how to go back to stock HC/ICS from ICS from CM10 without the nandroid backup? Just in case some problems will occur in the future. Thanks!
valkyrie-randgris said:
Finally, I'm on CM10. :victory:
Flashing back to ICS fixed the bootloop, then from there it's history!
Though I forgot to copy the cwm backup of my ICS before formatting the sdcard. Now it's gone :silly: . Anyway, it's nice to start off from scratch.
Can someone tell me how to go back to stock HC/ICS from ICS from CM10 without the nandroid backup? Just in case some problems will occur in the future. Thanks!
Click to expand...
Click to collapse
I rollback from CM10 to Stock HC with Odin and download stock HC from Sammobile.com.
Thanks mate! I'll keep that in mind.
I just hope bootloop or bootstuck won't occur. Like when I flashed the single HC tar file from sammy from ICS. Cheers!
So .. what should I do?
Sent from my GT-S5570 using xda app-developers app
Check below link if want to downgrade in safest way, using mobile odin.
http://forum.xda-developers.com/showthread.php?p=32427424
Sent from my GT-P6200 using Tapatalk 2
nopphonyel said:
So .. what should I do?
Sent from my GT-S5570 using xda app-developers app
Click to expand...
Click to collapse
Nopphoyel, can u turn your tab to download mode.?
Hope can, so here the step.
Try flash hc using odin1.85, put the firmware package to pda, check the re-partition. Select pit and put .pit file and flash.
It worked for me.
Get the pit file under 'dyelen' name from below link, download & unzip.
http://forum.xda-developers.com/showthread.php?p=31936913
Try 1st, hope work on u too..
How to flash cm10? Here the drill.....
1. Root. Download the supersuv0.94.zip from below link and save to externalsdcard, Turn to recovery mode/ Choose update from sdcard and flash supersu v0.94.zip:
http://www.google.com.ph/url?sa=t&r...zoHgDA&usg=AFQjCNFyqHRhzKdNa_kvZPRsaep-6XEt9g
2. Clockworkmod recovery- the most important thing if want flash cm10, u need the cwr. Download the recovery mode .img from aorth.
http://forum.xda-developers.com/showthread.php?p=29077817
,rename to recovery.img and save on external sdcard. U can flash recovery using heimdall or mobile odin, i prefer mobile odin. Download mobile odin.
http://forum.xda-developers.com/showthread.php?p=19375402
check the recovery select your recovery.img from external sdcard and flash. Wait until it reboot to the recovery. Before u flash any rom please make backup to internal sdcard & Try to restore 1st to makesure your nandroid backup work. Also backup using go backup or titanium backup. If your nandroid backup getting weird this optional to get your data back.
3. Backup call log and sms. Please backup to external sdcard just change the backup folder in setting. This very useful to restore back your log & Sms after your flash new rom.
Call log backup : https://play.google.com/store/apps/...hu.CallLogBackupRestore&feature=search_result
SmsBackup : https://play.google.com/store/apps/details?id=com.riteshsahu.SMSBackupRestore&feature=search_result
3. If all work. Wipe data/Cache/Dalvik.
Flash new rom
cm10: http://forum.xda-developers.com/showthread.php?p=30434924
happy flashing...
Do With Your Own Risk. And Don't Wipe Data using Ics stock recovery or temporary cwr. Since they detected have emmc brickbug and cause hardbrick. Hardbricks mean totally brick, only JTAG or change main board your last hope.
thanks to aorth for make this tablet getting better and better..
Sent from my GT-P6200 using Tapatalk 2
bujai5279 said:
Nopphoyel, can u turn your tab to download mode.?
Hope can, so here the step.
Try flash hc using odin1.85, put the firmware package to pda, check the re-partition. Select pit and put .pit file and flash.
It worked for me.
Get the pit file under 'dyelen' name from below link, download & unzip.
http://forum.xda-developers.com/showthread.php?p=31936913
Try 1st, hope work on u too..
How to flash cm10? Here the drill.....
1. Root. Download the supersuv0.94.zip from below link and save to externalsdcard, Turn to recovery mode/ Choose update from sdcard and flash supersu v0.94.zip:
http://www.google.com.ph/url?sa=t&r...zoHgDA&usg=AFQjCNFyqHRhzKdNa_kvZPRsaep-6XEt9g
2. Clockworkmod recovery- the most important thing if want flash cm10, u need the cwr. Download the recovery mode .img from aorth.
http://forum.xda-developers.com/showthread.php?p=29077817
,rename to recovery.img and save on external sdcard. U can flash recovery using heimdall or mobile odin, i prefer mobile odin. Download mobile odin.
http://forum.xda-developers.com/showthread.php?p=19375402
check the recovery select your recovery.img from external sdcard and flash. Wait until it reboot to the recovery. Before u flash any rom please make backup to internal sdcard & Try to restore 1st to makesure your nandroid backup work. Also backup using go backup or titanium backup. If your nandroid backup getting weird this optional to get your data back.
3. Backup call log and sms. Please backup to external sdcard just change the backup folder in setting. This very useful to restore back your log & Sms after your flash new rom.
Call log backup : https://play.google.com/store/apps/...hu.CallLogBackupRestore&feature=search_result
SmsBackup : https://play.google.com/store/apps/details?id=com.riteshsahu.SMSBackupRestore&feature=search_result
3. If all work. Wipe data/Cache/Dalvik.
Flash new rom
cm10: http://forum.xda-developers.com/showthread.php?p=30434924
happy flashing...
Do With Your Own Risk. And Don't Wipe Data using Ics stock recovery or temporary cwr. Since they detected have emmc brickbug and cause hardbrick. Hardbricks mean totally brick, only JTAG or change main board your last hope.
thanks to aorth for make this tablet getting better and better..
Sent from my GT-P6200 using Tapatalk 2
Click to expand...
Click to collapse
Every thing is OK but when i finish flash to HC It's locked with password and I don't know password.:crying:
And I tried to flash again and it stuck at Samsung Galaxy Tab Plus 7.0 logo (Not booting logo,This logo show before boot to android OS) :crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Did u wipe from ICS stock recovery or temporary cwr(Cwr with touch)? My tab also need password on hc after hardbricks 3month ago, i send to centre, they change the main board..
Try find people who can perform JTAG, or send to centre your last hope...Hopefully centre not find your root the device, your waranty will void & u need to pay for that board.
Sorry dude..
Sent from my GT-P6200 using Tapatalk 2
!!??
bujai5279 said:
Did u wipe from ICS stock recovery or temporary cwr(Cwr with touch)? My tab also need password on hc after hardbricks 3month ago, i send to centre, they change the main board..
Try find people who can perform JTAG, or send to centre your last hope...Hopefully centre not find your root the device, your waranty will void & u need to pay for that board.
Sorry dude..
Sent from my GT-P6200 using Tapatalk 2
Click to expand...
Click to collapse
Do u know how much is it I mean main board
Im from malaysia, in ringgit rm713.
Sent from my GT-P6200 using Tapatalk 2
I'm on Paranoid Android 2.50 (Androi 4.1.2), coming from Android 3.2.
Onething that I'd like to share is you should flash a cusstom rom wwhen you're on Android 3.2. Some friends of mine used the stock Android 4.0 then flashed CM10 or Paranoid and their devices bricked.
although very beautiful and fluid is still immature has many bugs that I at least I consider fundamental for me ... for example, does not read the external sd ... not the video player does not read the pen drive .... well you would for hands just a phone and not a very large smartphone / tablet sfuttare in full ... I have uninstalled immediately expect a more complete version ... more well known problems and then decide to suit your needs if you install it or not. hello ..
Inviato dal mio GT-P7500 con Tapatalk 2
---------- Post added at 10:31 PM ---------- Previous post was at 10:26 PM ----------
thangbithit said:
I'm on Paranoid Android 2.50 (Androi 4.1.2), coming from Android 3.2.
Onething that I'd like to share is you should flash a cusstom rom wwhen you're on Android 3.2. Some friends of mine used the stock Android 4.0 then flashed CM10 or Paranoid and their devices bricked.
Click to expand...
Click to collapse
Hello Could you tell me what bugs has paranoid 2:50?
Inviato dal mio GT-P7500 con Tapatalk 2
bujai5279 said:
Did u wipe from ICS stock recovery or temporary cwr(Cwr with touch)? My tab also need password on hc after hardbricks 3month ago, i send to centre, they change the main board..
Try find people who can perform JTAG, or send to centre your last hope...Hopefully centre not find your root the device, your waranty will void & u need to pay for that board.
Sorry dude..
Sent from my GT-P6200 using Tapatalk 2
Click to expand...
Click to collapse
Can some body help me please.I am trying to install cm10 rom and i get this message E:Error in /Eternal _sd/cm-10 (status) installation aborted.Please helpme

[Q] after update to JB, not able to downgrade

Since upgrading to JB 4.1.2, I am not able to downgrade to ICS. After the flashing ICS via odin or for that matter mobile odin, is complete, it goes into a boot loop. Only way way out was again flash Jelly bean, it worked. Is there any firmware with full components like pda separate file, CSC separate file and phone separate file? I have heard that we need to flash these separate files via odin to downgrade. can anybody give a download link for the same?
Do you have a CWM back-up from a previous ROM?
Sent from my GT-P6210 using xda app-developers app
unfortunately no
Sent from my GT-P6200 using xda premium
seking said:
Since upgrading to JB 4.1.2, I am not able to downgrade to ICS. After the flashing ICS via odin or for that matter mobile odin, is complete, it goes into a boot loop. Only way way out was again flash Jelly bean, it worked. Is there any firmware with full components like pda separate file, CSC separate file and phone separate file? I have heard that we need to flash these separate files via odin to downgrade. can anybody give a download link for the same?
Click to expand...
Click to collapse
you must go to stock ricovery ( with power + volum up ) and then wipe data
( your data are remove ( factory riset )
sorry for my bad ENGLISH
But I have heard that if one wipes factory reset through stock recovery, I am afraid one is liable to get bricked devices.
Sent from my GT-P6200 using xda premium
I would research the factory reset option. It shouldn't brick your device.
Sent from my GT-P6210 using xda app-developers app
deleted
S-AJAD said:
don'd worry
if you wipe in stock recovery your divice aren't break
if you wip in cwm or other castom recovery with stock row your tab are breaked
Click to expand...
Click to collapse
I thought it was the opposite... (at least for ICS)
Alway wipe in cwm
S-AJAD said:
don'd worry
if you wipe in stock recovery your divice aren't break
if you wip in cwm or other castom recovery with stock row your tab are breaked
Click to expand...
Click to collapse
NO! Wipe data in STOCK recovery brick your device, but if you wipe in CWM you are safe.
For downgrade use this guide:
http://forum.xda-developers.com/showthread.php?t=1777003
skurys said:
I thought it was the opposite... (at least for ICS)
Click to expand...
Click to collapse
i do this work when i have this tablet
i had the cyanogen mod 10 and 10.1 and paranoid.
when i want back to stock rom i need to do this work and my tab doesn't break
but in JB i dont sure. i think other member are better than me.
sorry for my english
S-AJAD said:
don'd worry
if you wipe in stock recovery your divice aren't break
if you wip in cwm or other castom recovery with stock row your tab are breaked
Click to expand...
Click to collapse
Just to make it clear.. wiping from stock is Safe IF you are in HC or JB ( someone said its safe ) but a big NO in ICS because it causes the tab to be bricked.. wiping from CWM on all roms is SAFE.. pls.. get your facts right..
Sent from my GT-P6200 using XDA Premium HD app
If you want to downgrade from official JB to official ICS, you have to have .pit file
You can search pit file for P6200 in XDA and using odin to flash official ICS with option re-partition checked
First time, when my friend downgrade without .pit file, tab got stuck at SS logo even wipe everything fully. With .pit file, it succeeded
goodwellbest said:
If you want to downgrade from official JB to official ICS, you have to have .pit file
You can search pit file for P6200 in XDA and using odin to flash official ICS with option re-partition checked
First time, when my friend downgrade without .pit file, tab got stuck at SS logo even wipe everything fully. With .pit file, it succeeded
Click to expand...
Click to collapse
Is it necessary to have three different files ie pda, phone and csc when using pit file eith repartition checked?
Sent from my GT-P6200 using xda premium
No, just ICS Stock Rom with .pit file
P6200 pit file in this thread (http://forum.xda-developers.com/showthread.php?t=1667886) works fine
You can downgrade to HC, do wipes and flash ICS.
i usually do encounter this on my 7.7 when i flash hc from ics...what i did was wipe the device using cwm after flashing the older firmware to fix the bootloop...
my friend have tab 7 plus and i'm planning to flash jb on it...is the stock JB recovery free from the brickbug?
JAYZE said:
i usually do encounter this on my 7.7 when i flash hc from ics...what i did was wipe the device using cwm after flashing the older firmware to fix the bootloop...
my friend have tab 7 plus and i'm planning to flash jb on it...is the stock JB recovery free from the brickbug?
Click to expand...
Click to collapse
I guess it is safe becoz someone did it already and it did not got brick.. if i were you.. after flashing jb.. flash the CWM.. then from there do the wiping
Sent from my GT-P6200 using XDA Premium HD app
goodwellbest said:
No, just ICS Stock Rom with .pit file
P6200 pit file in this thread (http://forum.xda-developers.com/showthread.php?t=1667886) works fine
Click to expand...
Click to collapse
I used the pit file and the ics stock and flashed using odin, the flashing went off smoothly with odin saying success. But after booting mine stuck at the samsung animation for eternity. Again I had no other alternative than flash jb back again.
Sent from my GT-P6200 using xda premium
seking said:
I used the pit file and the ics stock and flashed using odin, the flashing went off smoothly with odin saying success. But after booting mine stuck at the samsung animation for eternity. Again I had no other alternative than flash jb back again.
Sent from my GT-P6200 using xda premium
Click to expand...
Click to collapse
Did you check option re-partition in Odin?
By the way, stuck at SS logo is quite often happened if you did not wipe. You should try to perform full wipe.
There is an issue related to wipe using ICS stock recovery, you should use Odin to flash CWM recovery (without .pit file) and use CWM recovery to wipe.
seking said:
I used the pit file and the ics stock and flashed using odin, the flashing went off smoothly with odin saying success. But after booting mine stuck at the samsung animation for eternity. Again I had no other alternative than flash jb back again.
Sent from my GT-P6200 using xda premium
Click to expand...
Click to collapse
when you are stuck in bootloop flash cwm recovery and do a full wipe..that will fix it...avoid full reset using stock recovery to prevent brickbug

[Q] Bootloop after StockRom flashing

Heyo everyone
I'm coming from cm10.1 and now i wanted to go back to stock.
so I've downloaded I9105PXXAMC2 from samfirmware.com
unfortunately after flashing via odin i got bootloop
i've tried to wipe from android recovery but then there's only a red triangle
is there any solution?
it's almost impossible for me to download another firmware because my internet speed sucks so massive
Gh3ttoKiLL4 said:
Heyo everyone
I'm coming from cm10.1 and now i wanted to go back to stock.
so I've downloaded I9105PXXAMC2 from samfirmware.com
unfortunately after flashing via odin i got bootloop
i've tried to wipe from android recovery but then there's only a red triangle
is there any solution?
it's almost impossible for me to download another firmware because my internet speed sucks so massive
Click to expand...
Click to collapse
Install CWM with odin and wipe your data cache and dalvik cache from there then it will boot up fine
safariking said:
Install CWM with odin and wipe your data cache and dalvik cache from there then it will boot up fine
Click to expand...
Click to collapse
I think installing clockworkmod for wiping isn't an option. The op flashed stock Rom probably because he wants his warranty back
Installing clockworkmod again would void it again. If the stock Rom you downloaded is the one you had before rooting, then try flashing it again. If it's not, then download your originally out of box stock Rom and flash it with Odin.
Like...the same baseband version as the one you had before any modification of your system
Sent from my GT-I9105P using xda premium
Brian_SGW_CM9 said:
I think installing clockworkmod for wiping isn't an option. The op flashed stock Rom probably because he wants his warranty back
Installing clockworkmod again would void it again. If the stock Rom you downloaded is the one you had before rooting, then try flashing it again. If it's not, then download your originally out of box stock Rom and flash it with Odin.
Like...the same baseband version as the one you had before any modification of your system
Sent from my GT-I9105P using xda premium
Click to expand...
Click to collapse
You need to wipe it otherwise it won't boot up and if you had cm10.1 you must wipe your internal sd card to
if you install cyanogenmod and you odin back to stock rom the stock rom will simply not boot if no wipe was done!!!
safariking said:
You need to wipe it otherwise it won't boot up and if you had cm10.1 you must wipe your internal sd card to
if you install cyanogenmod and you odin back to stock rom the stock rom will simply not boot if no wipe was done!!!
Click to expand...
Click to collapse
I thought flashing through Odin already wipes..
So if I want to Odin back. With the clockworkmod, I first wipe, then flash stock. Right?
Sent from my GT-I9105P using xda premium
No
odin back first and after that install cwm and wipe!
Sent from my awesome S2 Plus
safariking said:
No
odin back first and after that install cwm and wipe!
Sent from my awesome S2 Plus
Click to expand...
Click to collapse
Can You please be more specific? I'm trying to install stock rom, and it's intering loop on boot. Trying to instal CWM via Odin - no success.
Did you wipe before flashing via Odin?
Sent from my GT-I9105P using XDA Premium 4 mobile app
Brian_SGW_CM9 said:
Did you wipe before flashing via Odin?
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
That's a question too... How to do wipe, if all I have is official bootloader, with debugging OFF, and loop / stuck on SUMSUNG logo?
(I don't care of any kind of warranty, just want to boot up this brick with ANY ROM!)
borsiknet said:
That's a question too... How to do wipe, if all I have is official bootloader, with debugging OFF, and loop / stuck on SUMSUNG logo?
(I don't care of any kind of warranty, just want to boot up this brick with ANY ROM!)
Click to expand...
Click to collapse
Can you reach download mode?
Sent from my GT-I9105P using XDA Premium 4 mobile app
Brian_SGW_CM9 said:
Can you reach download mode?
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes, I'm trying all original firmware from sammobile, that appropriate to this model. Sometimes it geting custom BIN, and bootloader taking it back to samsung official.
borsiknet said:
Yes, I'm trying all original firmware from sammobile, that appropriate to this model. Sometimes it geting custom BIN, and bootloader taking it back to samsung official.
Click to expand...
Click to collapse
Yep, that's the only way
Sent from my GT-I9105P using XDA Premium 4 mobile app
Brian_SGW_CM9 said:
Yep, that's the only way
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Maybe any way to know origin of the phone by S/N to which country he belong?
borsiknet said:
Maybe any way to know origin of the phone by S/N to which country he belong?
Click to expand...
Click to collapse
Find your country's name on sammobile. I mean of the firmware page of sammobile
Sent from my GT-I9105P using XDA Premium 4 mobile app
Brian_SGW_CM9 said:
Find your country's name on sammobile. I mean of the firmware page of sammobile
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
There are no my contry ROM. I stucked with bootloops and debug options OFF. What to do???! It's driving me crazy...
After almost two weeks of seeking for solutions all over internet, the problem was solved. First of all there are no way to root without debuging off via odin o any other tool. All what you have, is just to look for your original firmware of the phone, and it supposed to be four file package.
Looks like:
FULL_CSC_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
FULL_MODEM_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
FULL_PDA_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
s2ve.pit
In this case it was german phone so files end with DBT.
CSC - as CSC
MODEM - as CP or PHONE
PDA - as AP or PDA
and pit file for re-partition.
The name of whole package is GT-I9105P-DBT-I9105PXXAMC2_Service-Firmware.zip
For those asking for delete dalvik/cache/factory reset, the solution is - RE-PARTITION!
I used also option Nand Erase All, just to be sure I delete everything.
All other operations goes as usual in Odin.
I can't post links here, bat me mercy on those looking for solution for days and weeks long.
So here is link that I found on some forum that leading to (thanx Goshhhh!!!) to Google docs, so download was just 5 min. long.
Here is German (DBT) package, and some other usefull links. Use G. translator to understand.
h t t p : / / galaxysclub.ru/obzor-osnovnyh-funkcij-obsuzhdenie-i-reshenie-problem/2111-pomogite-s-i9105-proshivki-dlya-i9105 . html
Just remove spaces, where needed. This is a Russian forum. Respect and thousand thanx to Сергей, author of usefull post with links provided, once again THANX a lot, Sergej!
borsiknet said:
After almost two weeks of seeking for solutions all over internet, the problem was solved. First of all there are no way to root without debuging off via odin o any other tool. All what you have, is just to look for your original firmware of the phone, and it supposed to be four file package.
Looks like:
FULL_CSC_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
FULL_MODEM_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
FULL_PDA_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
s2ve.pit
In this case it was german phone so files end with DBT.
CSC - as CSC
MODEM - as CP or PHONE
PDA - as AP or PDA
and pit file for re-partition.
The name of whole package is GT-I9105P-DBT-I9105PXXAMC2_Service-Firmware.zip
For those asking for delete dalvik/cache/factory reset, the solution is - RE-PARTITION!
I used also option Nand Erase All, just to be sure I delete everything.
All other operations goes as usual in Odin.
I can't post links here, bat me mercy on those looking for solution for days and weeks long.
So here is link that I found on some forum that leading to (thanx Goshhhh!!!) to Google docs, so download was just 5 min. long.
Here is German (DBT) package, and some other usefull links. Use G. translator to understand.
h t t p : / / galaxysclub.ru/obzor-osnovnyh-funkcij-obsuzhdenie-i-reshenie-problem/2111-pomogite-s-i9105-proshivki-dlya-i9105 . html
Just remove spaces, where needed. This is a Russian forum. Respect and thousand thanx to Сергей, author of usefull post with links provided, once again THANX a lot, Sergej!
Click to expand...
Click to collapse
If anyone have problem with bootloop when flash original rom, solution is simple. Just go to recovery. Samsung has stock recovery. Wipe data/factory reset and reboot phone. Thats all . PS to go to recovery turn off phone. Wait 3 seconds. hold home buton, volume up and power buton in same tame.
jaskof1 said:
If anyone have problem with bootloop when flash original rom, solution is simple. Just go to recovery. Samsung has stock recovery. Wipe data/factory reset and reboot phone. Thats all . PS to go to recovery turn off phone. Wait 3 seconds. hold home buton, volume up and power buton in same tame.
Click to expand...
Click to collapse
That was a problem, loops after flashing with Odin.
jaskof1 said:
If anyone have problem with bootloop when flash original rom, solution is simple. Just go to recovery. Samsung has stock recovery. Wipe data/factory reset and reboot phone. Thats all . PS to go to recovery turn off phone. Wait 3 seconds. hold home buton, volume up and power buton in same tame.
Click to expand...
Click to collapse
Well this worked for me just fine
Boot into cwm
Go tot mounts and storage
Format everything (no ext sdcard
Flash firmware with Odin andere cwm would be deleted

[Q] Can't do hard reset right.

Hello!
I have Galaxy Tab 2 10.1.
That's the "evolution line" : Stock 4.0.4 => 4.2.2 (France) with Odin => root with Odin => ROM Cyanongenmod 10.1.3 => 4.2.2 (France) by clockworkmod recovery => Dhollmen 4.3 ROM. That's full list of things i had done with my tablet.
Problem: I can't do hard reset. CWM says all right, it's complete, after reboot all looks deleted, BUT all data can be found when i connect tablet to PC and browse files (or use Root Browser).
Also i can't clear apps cache in user interface and can't clear cache and dalvik cache in CWM.
I'm pretty new to android, rooted my first device (Galaxy s3) 1 month ago.
Help me please!
Doidik said:
Hello!
I have Galaxy Tab 2 10.1.
That's the "evolution line" : Stock 4.0.4 => 4.2.2 (France) with Odin => root with Odin => ROM Cyanongenmod 10.1.3 => 4.2.2 (France) by clockworkmod recovery => Dhollmen 4.3 ROM. That's full list of things i had done with my tablet.
Problem: I can't do hard reset. CWM says all right, it's complete, after reboot all looks deleted, BUT all data can be found when i connect tablet to PC and browse files (or use Root Browser).
Also i can't clear apps cache in user interface and can't clear cache and dalvik cache in CWM.
I'm pretty new to android, rooted my first device (Galaxy s3) 1 month ago.
Help me please!
Click to expand...
Click to collapse
Reinstall cwm should sove problem, if not flash stock then cwm again. I would recommend u flash 4.2.2 sammy update if available for your version
Sent from my GT-P1000 using xda premium
R1V3R0 said:
Reinstall cwm should sove problem, if not flash stock then cwm again. I would recommend u flash 4.2.2 sammy update if available for your version
Sent from my GT-P1000 using xda premium
Click to expand...
Click to collapse
Thank you, i'll try it now!
R1V3R0 said:
Reinstall cwm should sove problem, if not flash stock then cwm again. I would recommend u flash 4.2.2 sammy update if available for your version
Sent from my GT-P1000 using xda premium
Click to expand...
Click to collapse
Installed TWRP, thanks! :laugh:
All is working!

Categories

Resources