I was working on a ICS based hoppy rom. Unfortunately I just had a catastrophic screen failure, apparently when my laptop bag fell last night, it landed with enough force to shatter the screen on my nextbook! Oh well. it may be a while before I can work on anything to further the version I was working on.
FYI- Due to work, my time is very limited for working on the next version of Hoppy Rom. I apologize in advance. The company I work for is
setting up new engine test cells in China, and my self and 2 other people are main points of support! again Sorry for anything new taking so long!
DOCHOPPY HAS BEEN SIGHTED (Other than on a DAYZ server...Stay tuned.
Ok I have decided to pass along what I have been working on.
Warning***
This is for the Nextbook 7 premium ONLY!
Known working on Nextbook 7 premium tablets with serial numbers starting:YF1011
DocHoppy Presents!
DocHoppyRom Full On Root v2.0
and
DocHoppy Cramfs Style 3.0
Based off the official update image released by nextbook.
Major thanks to FINLESS BOB!!! GREAT HELPFUL GUY!
PRESENTING DOC HOPPY ROM
CRAMFS STYLE 3.0
AND
FULL ON ROOT v2.0
Disclaimer: I am not responsible for Bricked Tablets. This is known to work on tablet with SN starting with YF1011, and some YF1211.
First you will need to decide which version of the Rom you are going to load. The CRAMFS Style version has SU but you CANNOT write to the /system directory. This is a good all around Rom for those who may need SU but do not need to write to /system.
Full On Root is just that, you have full read write to the /system and can customize the Rom to your hreats content.
HOW TO INSTALL:
TO FLASH CRAMFS STYLE 3.0 Put the UPDATE.IMG file from the Cramfstyle Folder onto your SD card, while tablet is on and follow the on screen instructions.
After running the self extracting Zip file you will have a directory containing the following folders and files.
Drivers (folder)
CramfsStyle(folder)
FullonRoot(folder)
Log(folder)
Language(folder)
Readmefirst.txt
Rkusb.log
RkusbComm.dll
Setting.ini
RK29update.exe
TO FLASH CRAMFS STYLE 3.0 Put the UPDATE.IMG file from the Cramfstyle Folder onto your SD card, while tablet is on and follow the on screen instructions.
To flash Full On ROOT, Plug your nextbook into your PC via usb cable. Turn your nextbook over and with a safety pin or something of similar size, press and hold the reset button for 2 to 3 seconds.
Run the RK29update.exe
Select your Rom files via the boxes containing the .... And navigate to the correct directory for the rom you want to install.
Insert eache file in order according to the update tool.
Clear IDB. (this is like a lowlevel format for the Rom tool:
After the Tool says OK. Select Run. This will begin to load the Rom onto your tablet. It will go through loading and then checking the Rom install.
After the Rom loads and the tool comes back with an OK, patiently wait for the tablet to reboot, and load the new ROM. If the tablet is still connected to the pc via USB when the rom boots it will show the screen allowing you to select weather or not to turn on USB storage. Press the home key and you will be given a choice of Golauncher or Rklauncher. (go lock is a screen lock program.)
Enjoy the Rom!
Disclaimer: I am not responsible for Bricked Tablets. This is known to work on tablet with SN starting with YF1011, and some YF1211.
Features for both Roms:
Complete and correctly working market. It now correctly associates the tablet to your gmail account allowing purchases from market.
Launcher 3.0 as well as Go launcher ex. Launcher 3.0 was pulled from an rk2918 firmware3.0 update and put into this rom.
Google Calendar is now back and working correctly.
Original Email is back and working correctly.
Included Kindle App
Included Estrongs file explorer.
Both have SU though the Cramfs version cannot write to SW.
Removed Apps Added in last release and return to more of a original rom state.
Rom is pretty clean. And seems speedy.
Cramfs Style 3.0 Rom has 200mb internal Ram +/-
Full On Root 2.0 has 894MB of Free Internal Ram.
Cheers!
DocHoppy
www.freaktab.com
Keep in mind this is the first version of this ROM. There will be updates and changes made.
FUTURE CHANGES:
Custom Theme Changes.
More Tweaks to the system.
Long Term Wants:
Power Menu change to include recovery boot.
Power Menu change to include restart.
This is a work in progress.
Known working on Nextbook 7 premium tablets with serial numbers starting:YF1011
Linked here for image.
Non Add Showing Link.
DocHoppyFullOnRoot2.0
New Cramfs style Rom is still Available Here.
DocHoppyCramfsstyle3.0
To install DocHoppyRomv3.0, rename .img file to update.img, download update.img file, copy to SD card, and follow the prompt.
DocHoppyCramfsstyle3.0
Enjoy.
Disclaimer:
Not responsible for bricked tablets.
Enjoy!
Also visit www.freaktab.com
So freaking sweet, great work on RW!
I used Wendal's tool to decompress the cramfs file system.
As for the /system, Because the device uses cramfs, and based on everything I have read, using Wendal's tool to decompress the file system, make the changes, and compress is the only way I can see to be able to
customize the rom for the device. The image is rooted, but after the update.img is compressed, the /system file remains read only. I tested this using root explorer, but anything requiring su works fine. But all hope may not be lost, I was reading on a chumby forum someone suggested using mkfs.jffs to make it writable, but further down it notes that you would need to change the kernel (easy enough to recompile I think), to utilize a different file system. The boot loader would also need to be modified, something I am not ready to try and tackle just yet, I think I would be bricking my nextbook pretty quickly.
It is a start and I am actually learning a lot as I go.
Any thoughts or suggestions are welcome.
I am definitely a long time user / cyanogenmod / aosp fan, but as far as ripping open .img files its definitely new territory, I tried to find an internal SD card like the nook has, to maybe dump it, but I cannot find such a beast. Any progress you make is awesome. So do things like root explorer work, just not on /system due to cramfs?
Correct, root explorer does work, but due to cramfs, it does not allow you to toggle to rw from ro on the /system.
Working on taking apart apk's and customizing and rebuilding and resigning next.
just flashed this rom and it works great!
How would I go about doing a custom boot animation or image?
... even if it means flashing a new rom from clean?
This is great. Thanks. The only question I have is why do I see so few items in Market? Does it have anyhting to do with compatability?
Calendar & Sync Access
First, thank you for your work.
Before I update by Next7P, have you included Google Calendar and Sync access in this update?
I use MyPhoneExplorer and will need calendar sync to work so I can fully use for business.
Thanks.
There is another method to get Google Market on the Next7P, I am a new user so I can not post the link, but google , forums Whirlpool net au archive 1756859
, very easy and works great, but cannot get sync to work.
Dan,
Thanks for the responses!
sgtfoo : You can use Wendal's rk29xx tool to take a copy of my rom image, or the original update downloadable from nextbookusa.com, and
unpack it. You then have access to the system directory in an editable format. you can go into the system folder /system/media and replace the bootanimation.zip file with another one. Just be sure the image format is 480x 800 and that the zip file has 0% compression ratio. After you make the changes, just repack .img file via Wendal's tool and reflash.
dodoclub : Not sure why. I have a full market. You might try clearing the data and cache for the market. My market shows pretty full, I.E. I got 31050 entries when I searched for facebook in the market.
Danno65: Actually that is something I have been working on. I can get my google calendar to sync, currently I am using a calendar from the market called Jorte, which works great, how ever, googles actual calendar.apk closes unexpectedly, I am thinking it is just a version problem with the calendar, but haven't had a lot of time to follow up on it.
FYI here is the link to Wendal's tool, which makes it much easier to work on the update.img file.
https://docs.google.com/leaf?id=0B8hUXYDeoy_hNTc1YTVkYTMtNTNjZS00YjI2LTgyNDYtYjRjZjFmODdiZTQ1&pli=1
Cheers!
If you have any request or questions please feel free to ask, I will help anyway I can.
Thanks Dochoppy
Got one of these tablets for Christmass to replace an old broken tablet I use for work.
Google hosts our work email, so I still need to get Contacts and Appointments going, but I maybe able to side load them.
Noticed build.prop still has ro.secure=1. This prevents adb from having root access??
Calendar & Sync Access
DocHoppy,
I came across a post where the "Calendar.apk" and "CalendarProvider.apk" files must be in the "system/app" directory to work properly, I tried to copy these files to the above directory but found it to be read/only, will wendalls tool have to be used to get access to the directory?
Also, did you get your google calendars on your desktop to sync with Jorte on the Next7P, I tried but no luck.
Thanks
Dan
The updated image file worked great, thanks again
Thank you so much for your work in building a new rom for this thing. I am anxiously awaiting a new filesystem so we can have true root. How do we manage to recompile the kernel for ext4 support and change the /system fs?
Hello, first of all, thanks for your work!
I am having trouble loading this rom. it says there's an invalid image file in my sd card and if I want to delete.
Now, I don't know if my tablet is a never or older version of what you guys have...
Next7p
2.3.1
kernel: 2.6.32.27
build: v2.0.7.....
my serial is also different from alot..it starts with YF0511
any help or tips?
markmatters said:
Hello, first of all, thanks for your work!
I am having trouble loading this rom. it says there's an invalid image file in my sd card and if I want to delete.
Now, I don't know if my tablet is a never or older version of what you guys have...
Next7p
2.3.1
kernel: 2.6.32.27
build: v2.0.7.....
my serial is also different from alot..it starts with YF0511
any help or tips?
Click to expand...
Click to collapse
I would say the serial number would have something to do with it, check on the site for nextbook and see if your serial is in the same *batch* as ours, if the original serial is in a different group, im assuming the hardware may be slightly different? If so, you can always use his method to repack the original with root.
First off I would like to say that I was very pleased when I came across this thread from another one. I haven't flashed this ROM yet, but plan to. Thank you for your work on this as I have been searching the whole internet since I got this thing [4 weeks now] for some sort of custom ROM. It is hard to use this tablet when I have ICS on my Captivate and Vibrant. GB just isn't as cool.
One thing I hope we can work on is root access, so we then can use Titanium Backup. Then we won't have to manually reload everything when new releases come out.
With all that being said, if there is anything I can do to help, I would love to. Like I said, I plan on flashing this probably tomorrow or Tuesday. Thanks again.
For the record, I got titanium backup working fine on this rooted rom. it is capable. You just need to reboot after it restores a backup.
i'm new to android. glad to see rooted rom finally, keep it up!!!
i have a clarification, any improvement in the booting time? my device took 1min30sec (power ON to ready to use, for me, 90sec seem like not fast enough).
Good luck on improving boot time. And besides a tablet is best used when on all the time... try using the suspend state to quickly wake it. We're just starting with the early versions of this rom... give it time to grow.
Sent from my N7p using XDA App
Build.prop editing
Okay so observation:
Our tablet is not recognized as a "tablet" by the Android market, only and android device.
What prop would I have to edit in order to have us recognized as I tablet. I noticed this when:
I finally managed (through some internet tutorial before this rom) get the market working (the first version, not 3.1+). And when I downloaded apps (I'll use Minecraft Pro as an example) I noticed that the way mine looked and the way the tablet version looked via android market photos and Youtube, ours looks like an enlarged phone version rather than a tablet optimized version. What can I edit to fix this?
Flashed this today... so for it works great. Love the new boot animation. Great work and can not wait for future releases!
Sent from my Nextbook Premium 7 (Doc Hoppy's Rom v02) from the XDA app.
---------- Post added at 12:16 PM ---------- Previous post was at 12:03 PM ----------
One thing that would be great on a future release [not sure if it is possible yet with out r/w], would be a bigger data partition for apps. Moving everything large to the SD is ok, just takes longer to boot those apps. A kernel that would allow voltage control app [like CPU Master] to work also. Just a thought!
Related
Welcome to OS Easy Launcher
I have developed this app initially to launch android in a simpler manner. It now supports booting multiple OS's on your Storage card. Any issues related to the stability of android or the other OS's are not related to my app but the build of the OS itself. One of my main goals of this app is to make it as aesthetically pleasing as possible for a WM app. if you see any room for improvement let me know and I will try to make it better.
For all builds of Android and Ubuntu that will work with this app go Here
Instructions:
1. download and unzip to the root of your storage card the version of android or ubuntu from above.
2. download Android Easy Launcher and install to your phone
3. Launch easy installer and launch the build type you had unzipped to the root of your Storage Card
4. Enjoy!!
Instructions for Win 95:
1. Download here
2. extract to root of your Storage Card a
3. Run Os Easy Launcher app and enjoy!
Note: when exiting Win 95 your phone will exit to landscape mode. you will manually need to change your orientation back to portrait.
If you have any suggestions let me know. also if you are having issues let me know what build your using and if your using sense build or not as well as rom so i can make this as compatible as possible.
If your a chef and want to cook this in your app feel free to do so. if you want to be notified of when i update the app for your next rom pm me and i will give you a heads up when its ready.
UPDATE:
Video of how to put android on your phone along with using the app coming soon!!! (need to charge my video camera)
Credits:
Thank you tbdawg for the code to check if the files are on the sd card.
Updated translation for German Rom version thanks to akeos2000
For this app in other languages please see post 2!
Current app version:
v3
English
German
Norwegian
Current features:
-All Launguages-
*launches desire build still will need to run CLRCAD.exe first.(im trying to fix it so you dont have to)
*launches froyo build
*launches Windows 95
*launches ubuntu
*info selection added in menu - displays a brief info on the app in a message box
*checks if file for build is located on storage card before it launches. if the file is not found it will display a message. see images for example
*now boots both CLRCAD.exe and haret.exe for certain builds requiring CLRCAD.exe to run properly.
*now able to boot multiple builds in several locations on storage card ---- Froyo located in the Android folder, Desire located on root of storage card and Ubuntu located in the Ubuntu folder (note: app does not install the folders they are located in the current zip files from the link i posted above. just unrar to storage card basically.)
German Version:
Updated translation thanks to akeos2000
Future features:
*auto update android build
*multilanguage support
Fixes:
V3
*removed standard build of android due to the newest build of Desire gives you the option to launch with sense or without.
*replaced standard build with windows 95
*updated Background image as well as icon image
*app renamed to OS Easy Launcher
V2.5
*CLRCAD.exe for both desire build and new froyo build launch before haret automatically. if the build is not found a message will appear. This does not require a reg tweak to work.
*Now you can have the new froyo Android folder, Ubuntu folder and the desire build all be located on the storage card at once this will allow you to boot whatever version you want without having to overwrite to test the newest build.
*Updated app icon in stat menu
*updated UI again
V2
*now checks if file is located on storage card before it launches.
V1.5
*ubuntu now calls to proper folder to launch
*restored second button to boot CLRCAD.exe (only needed for desire build)
ETA of next update to app:
tomorrow most likely. working on multilingual support now.
Other Languages:
I have just translated everything in the original app. should work with foreign roms. just select the language of your app and it will search your storage card in the right language structure.
note: if you see the english version updated the foreign language version will be updated to the same build and reuploaded.
Currently Supported
*German - Confirmed Fully Working
*Norwegian - Confirmed Fully Working
Dont see your language then request it. Just let me know what they call storage card in your foreign rom!!
do i have to extract anything or jst download and launch
when i down load it and do step one an error comes up and when i do step two an error comes up and saysfailed to load file/storage card /zimage
I'm going to take a simple guess here and say you do not have a single Android file on your memory card. This is a simple shortcut program to the files that you should already have on your phone's memory card.
the app currently works best with the latest disire build 2.5. I am working on updating it for other images as i just read that some say zharet.exe so that should be resolved soon. currently you need to have extracted your latest android build to the root of your storage card then install my app and launch. I will also automate step 1 so all you will need to do is launch haret. I will be trying to get a hold of the devs and see if they would not mind if i included an update feature so you can use my app to update the build to the latest released version. Sorry i did not clarify as much earlier as i was headed to the hospital and wanted to get the thing uploaded real quick.
Well i am currently trying to finish downloading some more builds for the HD2 to test with my app. I believe i will have it set as sense build, standard build, Froyo build, and Ubuntu build. Post 1 will be updated with a new link to get any build of android for the HD2. New version to be uploaded as soon as all testing is done.
App updated to v1.5 and reuploaded. let me know if you find any issues.
Strange, but my device is held after runnig android
I have try two version of android (desired and standard)
in both cases after "init panel" command in console screen isa faded and device not respond to any actions, axcluding battary removal
May be i did some thing wrong ?
I get an error no matter what when i press either launch or run button. i have the android build stored on my storage card/root folder and extracted. what am i doing wrong?
i will make a video tonight on how to. i hope it helps everyone. sorry for the short reply about to get on a plane.
stunning m8 quite slow and the camera function inc googles doesnt work at all on my hd infact its frozen a couple of times (just using standard build) but still its good to see android on my hd2.
thanks and keep up the good work!
matothett said:
I get an error no matter what when i press either launch or run button. i have the android build stored on my storage card/root folder and extracted. what am i doing wrong?
Click to expand...
Click to collapse
ruslanin19 said:
Strange, but my device is held after runnig android
I have try two version of android (desired and standard)
in both cases after "init panel" command in console screen isa faded and device not respond to any actions, axcluding battary removal
May be i did some thing wrong ?
Click to expand...
Click to collapse
I am making a video to show how to setup your storage card for andriod and using the app. i will have this up in the next day just need a charge on my camera as it is completely dead. Please remember any issues with android is not due to this app but due to the build of android. The devs have done an amazing job to get us to this point in such a fast time but its really only in the stages to playing with and not really functional for daily use.
Mobbs said:
stunning m8 quite slow and the camera function inc googles doesnt work at all on my hd infact its frozen a couple of times (just using standard build) but still its good to see android on my hd2.
thanks and keep up the good work!
Click to expand...
Click to collapse
Thank you very much!!!
HELP,HELP!!
Hi,
I followed Yr installation instructions to the letter...The moment i launched version 1.5...& chose the standard android build...my screen went blank...though it was normal but after a few minutes nothing...I then rebooted & now none of my apps want to run except the standard apps that come with the phone...
When reboot now notification pos up saying cant run-PocketNotify!
Manilla-2.5.19211619.0
ROM-1.66.421.1 (76641)wwe
Radio-15.30.50.07U
I tried to reinstall apps just says unsuccessful!
check ur date as i noticed when u return from android to wm it gets messed up. the app only lauches the exe for you and does not touch anything else. it does not even access anything from internal memory only the storage card. i think the issues are related to the android builds themselves as i lost the htc volume skin after running haret from my storage card without my app on the phone so thats why i lean towards it being build related. but do check all ur settings.
got it working 1st try. nice work my friend. if i werent so damn broke i would donate, even if your not asking.
cheers
Ryan258896 said:
got it working 1st try. nice work my friend. if i werent so damn broke i would donate, even if your not asking.
cheers
Click to expand...
Click to collapse
Thanks bro. Im working on updating the app again real soon. should be up in the next day or so.
new build up and ready with more optimizations.
awesome job, thanks again. im actually tri booting with your app. i have Desire 3.7 and Ubuntu as well as WM 6.5 Energy Rom, all 3 working fine. downloading the update now.
Ho.. great job man the' Easy Launcher v2.5' is the app i looking for. Works perfect when booting froyo thanks alot ....
nextbook 3 / Prestigio PMP3084B / Odys Genesis
(same thing all roms work on all 3 devices)
Android OS 2.1 <<<not any more
RockChip RK2818
dual Core CPU, at ~600MHz
8.4" 800x600 resistive touch / 4:3 display
__________________________________NEXTBOOK 2 ROM ONLY_____________________________________
special thanks to delimeat52
http://www.mediafire.com/?rd5zoladeyf4tlv
__________________________________________________________________________________________
Origional Next3 firmware with market and root added
http://www.megaupload.com/?d=UR080WKG
Origional Prestigio PMP3084B firmware with root and market
http://www.megaupload.com/?d=K7273SCB
Prestigio PMP3084B firmware with root and market and no bloat ware
http://www.megaupload.com/?d=O4KIRFXY
Prestigio PMP3084B firmware 2.1.2 striped of bloat only 12 apps pre-installed the system is truly rw, busybox installer verified, boot animations removed
works grate on the next book (that's what i have)
i feel its one of the best ones ive created so far
only con with it is its defaults language is Russian just change the language goto settings its the 7th down,(has an A next to it) press the first option then scroll to English
http://www.megaupload.com/?d=GVFCVAJP
same as above but default is english and location is US also
http://www.megaupload.com/?d=1FSTL1X1
Market Fix if not working:
1. Open Settings.
2. Select Applications.
3. Select Manage Applications.
4 Press Menu > Filter > All
5. Clear Cache for - Checkin Service, Download Manager, Gmail, Google Talk Service and Market
6. Reboot Device
if that dosent work then your on your own and i wish you luck
__________________________________ FROYO_____________________________________________
2.2 FROYO EDITION version 1 !!!!
http://www.megaupload.com/?d=AZN9CGCQ
2.2 froyo version 2 stripped of bloat
http://www.megaupload.com/?d=6KTPYAAL
2.2 Froyo v3 removed second search, kickback, added life wallpapers added back desk clock
http://www.megaupload.com/?d=O2RF5O7X
2.2 Froyo v4 fixed root, Added some essential apps Special thanks to MajstorSpeedy he fixed it!
http://www.megaupload.com/?d=XOY8KA14
2.2 Froyo v5 Special thanks to DaremoS he made it!
fully rooted, smaller, possible speed improvement
http://www.megaupload.com/?d=5ZXKJEL7
known problems
calibration isnt perfect,
browser force closes install one from market
if you only see one app in the featured of the market place do this
goto Applications/ALL
Find Market. clear cache & force stop
Find Google Services Framework. clear data & force stop
Now when you try to open the Market, it closes and you get an error.
Reboot phone, Market should be fine now.
_______________________________________GINGERBREAD________________________________________________
http://www.megaupload.com/?d=O8EK69NU 2.3.4 GINGERBREAD beta v.2
TESTING ONLY
known things
- Android 2.3.4 (Gingerbread)
- TS works fine (had to remove TScalibration)
- Fully rooted
- Faster than 2.1
- Stable
- Missing USB (missing the ability to connect to pc)
- Missing Market
special thanks to MajstorSpeedy he created it
_______________________________________________________________________________________________________
move this to the sd card or the internal and update it
if it says invalid then use the directions and tools here
http://www.megaupload.com/?d=X5J1GIDD
more roms coming soon...............
WARNING:
This will erase all your current data, and as always I a not responsible for bricking your device!
_______________________________________________________
if you wish to buy me an energy drink click here to be sent to paypal!!!!
i have so far collected $1 for all of my hard work here updated on 10/16/11
YES!!! thank you for trying, I'm afraid im nothing more than moral support brother. good luck.
So I just put the .img files onto the root of the internal memory? Then what?
How do I flash the img files? Tried Droid explorer, nada.
I've done the same... but my tablet rejects the updated.img file as invalid and offers its deletion
I think i got it going into recovery mode:
HOLD the Down arrow key and Press the Power button (connect it via usb to a computer prior to do this) now the screen is still black but the computer will try to install usb driver for it ... where is the usb driver ?? LOL
Hello, everybody!
I've been hunting for information about this tablet for some time and decided to stop leeching info and share what I got so far (not much but could be helpful). My primary goal isn't really a flashy ROM (no pun intended, neither about flashing nor adobe flash ), but a rooted device.
Here's what I know:
First of all, my tablet is sold by a different name, but is essentially the same device as next 3, probably a generic Chinese tablet. It is called Prestigio MultiPad PMP3084B:
XXX
All software should be completely compatible between these two devices, as far as I know.
As you can see, Prestigio has recently updated the firmware to 2.1.2. It still has a lot of bloatware (fring, facebook, etc) and cannot be rooted by usual tools, but includes SlideMe app market and an updated book reader (I have used it for a couple of days now and not much is changed from the previous build). If you nextbook users want to try a different firmware, you could try this one (or at least use it in future ROM cooking).
For some reason the links on the main Prestigio website don't work, so here are the links with working files:
XXX
The most useful thing for us should be the instructions and tools for flashing. The instructions given in the .doc files work 100%, both driver installation and flash procedure are fully explained, so be sure to check it out.
Another useful thing I found are the instructions for making a custom rooted ROM for rk2818 devices, found at XXX
I haven't had the time to try those out, but I found some info about people who made it work on various rk2818 devices.
Lets make this thread useful to others, share our experiences and try to unlock the bloody thing.
Edit: Unfortunately, the forum has a spam-preventing feature which doesn't allow me to post outside links before accumulating 8 posts. I will gladly send you the links through PM, just contact me. It would be nice if somebody with higher user privileges could then post them in this thread.
donaldj83 said:
7" 800x600 resistive touch / 4:3 display
it seems every one wants it done yet no ones doing any thing about it i'm at lest trying
if you have done this before and want to help please do send me a pm or post it here
Click to expand...
Click to collapse
I'm glad to join your initiative, hopefully we can achieve something in this thread. Just one small correction: the screen is 8.4'', which is important as it makes this tablet stand out from generic 7'' tablets.
I DID IT!
Working market and full perm root ill have it uploaded in a few mins!!!!!!!!!!!!!!!!!!!!!!
Full working root and market!!!!
http://www.megaupload.com/?d=UR080WKG
working market and full root!
move this to the sd card or the internal and update it once you get back to the main screen open the market login first try to download some thing if it fails then do this
Market Fix if not working:
1. Open Settings.
2. Select Applications.
3. Select Manage Applications.
4 Press Menu > Filter > All
5. Clear Cache for - Checkin Service, Download Manager, Gmail, Google Talk Service and Market
6. Reboot Device
Now there is also this eReader : http://www.odys.de/web/web_lan_de_hmp_1_mp_18_an_X610000_sw_ja.html
which also have it firmware update to 1.3.4
Hello I have a Prestigio PMP3084B whixh seems to be based on the same hardware as NextBook Next3. PMP3084B even has a secondary interface which looks exactly as the one on the Next3.
I'm trying to root my device, but had no luck yet. If this Next3 got rooted maybe there is a chance for me too. Any ideas?
But Prestigio has just release a newer Firmware Build than the Next3 ... i have saw the ROM on Odys Genesis and it's a better interface than the others two
look on the first page of this thred
"
http://www.megaupload.com/?d=UR080WKG
working market and full root!
move this to the sd card or the internal and update it once you get back to the main screen open the market login first try to download some thing if it fails then do this
Market Fix if not working:
1. Open Settings.
2. Select Applications.
3. Select Manage Applications.
4 Press Menu > Filter > All
5. Clear Cache for - Checkin Service, Download Manager, Gmail, Google Talk Service and Market
6. Reboot Device
if you wish to donate pm me and ill give you my mailing address"
i got it working
I saw you wonderfull works, but i just want to pointed out that the Next3 firmware is only on build 1.3.23 the others two: Prestigio and Odys
are at Android 2.1.2 build 1.3.34 and they got a better interface than thsi Next3
Cheer
donaldj83 said:
look on the first page of this thred
"
http://www.megaupload.com/?d=UR080WKG
working market and full root!
move this to the sd card or the internal and update it once you get back to the main screen open the market login first try to download some thing if it fails then do this
Market Fix if not working:
1. Open Settings.
2. Select Applications.
3. Select Manage Applications.
4 Press Menu > Filter > All
5. Clear Cache for - Checkin Service, Download Manager, Gmail, Google Talk Service and Market
6. Reboot Device
if you wish to donate pm me and ill give you my mailing address"
i got it working
Click to expand...
Click to collapse
y2k-inc said:
I saw you wonderfull works, but i just want to pointed out that the Next3 firmware is only on build 1.3.23 the others two: Prestigio and Odys
are at Android 2.1.2 build 1.3.34 and they got a better interface than thsi Next3
Cheer
Click to expand...
Click to collapse
oh i'm sorry i didn't realise every one already had market and permanently rooted there nextbook 3 i figured i was the first my bad next time i wont bother going through the trouble for every one else
donaldj83 said:
oh i'm sorry i didn't realise every one already had market and permanently rooted there nextbook 3 i figured i was the first my bad next time i wont bother going through the trouble for every one else
Click to expand...
Click to collapse
No ONE has got Permanent ROOT except your wonderful work, but just that there are newer build than Next3 if you can root it and put a working market then it's a great of both world ... hope fully one of the other two will put out Froyo for this device ... Thanks again for you hard work ... keep it up ...
Cheer
y2k-inc said:
No ONE has got Permanent ROOT except your wonderful work, but just that there are newer build than Next3 if you can root it and put a working market then it's a great of both world ... hope fully one of the other two will put out Froyo for this device ... Thanks again for you hard work ... keep it up ...
Cheer
Click to expand...
Click to collapse
ill have to google them sorry for being pissy having some problems, didnt meen to direct it twards you you said there identical as far as hardware goes? have you tryed to flash thows imgs to the device? dose it take or say hell na? i havent the foggiest as to how to take some thing elses firmware and make it work when i have some more time ill look into it i used a custom kitchen script built from a guy from another android device and used my decripted system.img before adding the mods and by luck i got it to go with out a hitch if u want let me know i can send ya what i have and let you take a look at it
P177 got back to me on those links
heres the links p177 was trying to send out
http://marketing.prestigio.com/$Customer_Support/Drivers/Tablet_PC/PMP3084B/PMP3084B_FW_V2.1.2.zip
http://marketing.prestigio.com/$Customer_Support/Drivers/Tablet_PC/PMP3084B/tools%20v1.23.rar
http://marketing.prestigio.com/$Customer_Support/Drivers/Tablet_PC/PMP3084B/SOP%20(PMP3084%20Firmware%20Upgrade%20Guide)-by%20upgrading%20tool.doc
im goina try tinkering with this over the next few days and see what i can do
update heres the rom link he was talking about as far as moding roms and what not
http://wiki.archosfans.com/index.php?title=Dump_your_Home_Tablet_rom_and_create_a_custom_rom
also i have a link to throw into the fire as well its how to pack and unpack roms
http://www.androidtablets.net/forum...-repack-custom-firmwares-rockchip-rk28xx.html
using the instructions on here http://androtab.info/rockchip/devel/rkutils
can some one get the decriped img of the system.img for Prestigio PMP3084B
This is an extremely simple ROM modification to the standard Advent Vega 1.10 system image that only alters a couple of things. These are as follows:
/system partition size increased from 128mb to 155mb. (The reason for this will be explained below)
su and SuperUser.apk added - You can use root apps as standard now.
ClockworkMod Recovery built-in.
Added Pauls simple recovery reboot app to get into CWM recovery.
That's all! No google apps, nothing else, just these simple changes. This isn't intended to be used as an everyday ROM (although there is no reason why you couldn't).
The main reason for this, is to be used as ROM base for VegaComb (and any other ROM you wish to use). I have been struggling with the Vega's default partition sizes while trying to port Honeycomb, and rather than spending tons of time trying to make stuff way smaller than it was ever intended to be, this seems like the better option.
So, flash this in nVflash recovery mode (exactly the same as the stock 1.10 image) and off you go. Done. No need to do anything else. You can use this base with any ROM, the ONLY downside is that 30mb of storage has been re-allocated from /data to /system, which most people won't even notice.
ALL future versions of VegaComb will require that you use this modded system image as a base (as they will require more than 125mb of /system space). To return your partitions back to the way they were, just re-flash the stock 1.10 image from www.myadventvega.co.uk (this is the ONLY way to restore your partition sizes, restoring from a Nandroid backup will NOT change your partition sizes back). You DON'T have to return to stock when you want to switch from using VegaComb, all other ROMs should work perfectly fine on top of this base, including Corvus5 and CM7.
Also, it's handy to have this in case you brick your Vega as CWM is pre-installed
AS ALWAYS MAKE SURE YOU NANDROID BACKUP BEFORE FLASHING ANYTHING!
Download ModdedStock_1.10 v2 Here!
Woo Hoo, good sign for things to come
Good work, Love the idea of a bigger /system..saves a lot of messing around moving apps to /data. Cheers. Paul
Just can't get this to install :-(
Keeps coming up with unknown device found!!
Ooops, forgot to plug the charger in.........sorry :-(
I use ubuntu will this work through wine or would i be better off trying to borrow a windows MC
Flash without usb cable?
Is there a way to flash this ROM without using the USB cable and recovery mode since my VPAD10s is giving a huge pain with windows 7 and the driver so I can not make it work.
Is there a version to be used with rom manager?
Thanks guys.
You need to use your PC because this ROM changes the partition sizes in the internal memory, and you need a PC program (nvflash) for that purpose.
Damn! thanks Logseman, I will keep on trying to get my tablet recognized over w7 can´t believe it´s so hard to make it work. wish me luck
Hope over to the Modaco Vega forum and search for YAUDIG and AUDI. They'll get the drivers installed for you.
simonta said:
Hope over to the Modaco Vega forum and search for YAUDIG and AUDI. They'll get the drivers installed for you.
Click to expand...
Click to collapse
Thanks simonta, already tried AUDI´s soft but no luck.
I´m starting to think that the issue might be with my pc/w7.
Great stuff!
Rgds
Lok
Hi:
Currently using vegacomb 0.6, i want to nandroid backup, install the new Rom base, then nandroid restore, and then upgrade to vegacomb 0.7 via the upgrade patch, in order not to loose all my settings.
So I would like to do a Nandroid backup, but being Android illiterate, i havent found how to do it in vegacomb 0.7.
Another question is , as I have moved most apps to SD, if there would be any problem regarding the base rom change and nandroid bacup-restore
Thanks for any hint/pointer
Which gapps should I use it for this built?
Zebwen said:
This is an extremely simple ROM modification to the standard Advent Vega 1.10 system image that only alters a couple of things. These are as follows:
/system partition size increased from 128mb to 155mb. (The reason for this will be explained below)
su and SuperUser.apk added - You can use root apps as standard now.
ClockworkMod Recovery built-in.
Added Pauls simple recovery reboot app to get into CWM recovery.
That's all! No google apps, nothing else, just these simple changes. This isn't intended to be used as an everyday ROM (although there is no reason why you couldn't).
The main reason for this, is to be used as ROM base for VegaComb (and any other ROM you wish to use). I have been struggling with the Vega's default partition sizes while trying to port Honeycomb, and rather than spending tons of time trying to make stuff way smaller than it was ever intended to be, this seems like the better option.
So, flash this in nVflash recovery mode (exactly the same as the stock 1.10 image) and off you go. Done. No need to do anything else. You can use this base with any ROM, the ONLY downside is that 30mb of storage has been re-allocated from /data to /system, which most people won't even notice.
ALL future versions of VegaComb will require that you use this modded system image as a base (as they will require more than 125mb of /system space). To return your partitions back to the way they were, just re-flash the stock 1.10 image from www.myadventvega.co.uk (this is the ONLY way to restore your partition sizes, restoring from a Nandroid backup will NOT change your partition sizes back). You DON'T have to return to stock when you want to switch from using VegaComb, all other ROMs should work perfectly fine on top of this base, including Corvus5 and CM7.
Also, it's handy to have this in case you brick your Vega as CWM is pre-installed
AS ALWAYS MAKE SURE YOU NANDROID BACKUP BEFORE FLASHING ANYTHING!
Download ModdedStock_1.10 v2 Here!
Click to expand...
Click to collapse
Thanks. one questions. Which gapps should I use for this built?
Thanks again.
hi, can i flashed this rom using CWM?
No, you can only flash it using a pc.
@all
Can someone please tell me how to use the nvflash, cause i'm clueless. I've searched using google but no luck, even on YouTube. I've downloaded nvflash but I can't work it. It keeps telling me about the drivers, although I installed the drivers. Any help would be great.
Thank you in advance.
jayk32 said:
@all
Can someone please tell me how to use the nvflash, cause i'm clueless. I've searched using google but no luck, even on YouTube. I've downloaded nvflash but I can't work it. It keeps telling me about the drivers, although I installed the drivers. Any help would be great.
Thank you in advance.
Click to expand...
Click to collapse
Hi
Switch off your Vega.
Connect it to the PC with the USB Cable.
Hold the power button on the Vega for 2 secs
Hold the back button while still holding the power button for a further 2 secs.
Release the power button but keep holding the back button for a further 2 secs.
You should now have a black screen and the Vega should be recognized on your PC (check in Control panel under USB for Nvidia Harmony or Shuttle)
The above assumes that you have installed the drivers.
Then open Modded Stock v1 or 2 which you should have already downloaded to the PC and it will install on the Vega (Vega will show NV Flash mopde across the top of the screen)
Once Modded stock is installed go to the apps menu and the recovery app is there. If you have already downloaded and put on your SD Card, the Vegacomb 9n Rom run the recovery and it will put you into CWM.
Wipe data, cache and in advanced the Dalvik cache.
Then select install from SD card and select the Rom and it will install.
If you continue to have problems Google Vegatools 4.1 and download and install
and it can do all the hard work.
Hope this helps
Stransky
Hi guys, sorry to hijack the thread an take it slightly off course but........
Buy flashing this stock modded rom, will it reset my touch screen issues? Read that its a pretty common problem.
I've tried the fix at modaco, and it works.......for a very brief period, then back to just half of my landscape screen being recognized?
I've only had my Vega a week, can any other of you more experianced fellows point me towards a fix? It would be much appreciated.
Sent from my VegaComb using xda premium
Thanks for a awesome rom.One questions,having problems with the sensor.Is there a simple solution to this?i have wiped dalvic cache but didnt help.I want to play games like NFS Shift and ather other games with sensor abilities.
Why not use Custom MTD ?
http://forum.xda-developers.com/showthread.php?t=717874
Welcome to Androot-N7p-ROM for the NextBook 7 Premium *ONLY.
I decided to change up some of the apps and generalize the rom in terms of its boot-animation screen. It runs on LauncherPro (just choose it as the "always"/default upon first instance of it. The Launcher that comes with the device isn't so great, but I left it there just in case.
It's based on the first known rooted ROM for this device: 'DocHoppy's ROM'. Credit for most of this ROM goes to him and to 'Wendal' for his toolset for packing the ROM (into cramfs) for the Nextbook 7 Premium device.
As such, it is a beta/ work-in-progress.
Androot-N7p-ROM v0.2
[ 146 MB ]
download here
Instructions:
*WARNING: FLASHING THIS DEVICE WILL ERASE YOUR DATA AND APPS!!!!*
Download image.
Rename file to update.img
copy file to root of SD card.
Follow on screen prompt asking if you want to run update image.
Disclaimer:
I am not responsible for bricked devices.
Here's my changes..
removed:
-youtube player <- the real youtube app is better
-explorer <- redundant
-slide me app market <- redundant now that Google's Market is installed
-quick search box <- Google Search widget is better IMO
kept/added:
-Market <- the real Google one
-root explorer - an alternative & capable file explorer
-astro file manager <- we all know it well
-quickpic 1.5.2 - a much lighter & more efficient photo organizer/viewer
-3D gallery <- some love it, some hate it
-brightness level 1.0.0 - quicker brightness changes
-ConnectBot 1.6.2 <- for those that need a SSH tool
-Officesuite full <- may as well keep it
-Titanium Backup 4.6.7 <- has some very handy tools aside from backups
-LauncherPro 0.8.6 <- may be old, but it's smooth and capable
-superuser <- because this rom is rooted
-has some of the Google Apps (go ahead and add as you see fit)
-has a custom boot animation.
Click to expand...
Click to collapse
Known Issue:
Apps2sd reports SU Binary out of date. Attemps to update this via superuser fails due to cramfs file system.
It's not perfect, but it does work well and I run it as my daily driver on my N7P.
Please give feedback or suggestions! I trust the pro devs could easily help me out with the little things!
-------------------
here are other threads related to the Nextbook 7
http://forum.xda-developers.com/showthread.php?t=1410862 (dochoppy's rom)
http://forum.xda-developers.com/showthread.php?t=1190990 (rooting talk? )
Since I'm new to modifying/cooking ROMs, here's my
Questions I have for the devs that cook ROMs all the time...
(lol)
Where do I edit the items that show in 'settings > about' in the device?
How do I change the default shortcuts that LauncherPro puts on the dock?
How do I change what icons are default on the home screen?
Where do I put custom wallpapers as part of the rom?
How do I modify Android UI colours?
Can the dialer be removes without losing "contacts"?
How do I create a shortcut to "contacts" without the phone/dialer?
(more to come I'm sure)
Hello, first of all, thanks for your work!
I am having trouble loading this rom. it says there's an invalid image file in my sd card and if I want to delete.
Now, I don't know if my tablet is a never or older version of what you guys have...
Next7p
2.3.1
kernel: 2.6.32.27
build: v2.0.7.....
my serial is also different from alot..it starts with YF0511
any help or tips?
In Dochoppy's original rom/post he mentions that the device will need to have a serial number starting with YF1011. That stands the same for this rom, as it's derived from his.
Having an invalid update.img firmware file could be due to a number of things, but the one I have here works on my device.
I wish I had more of an answer, but by all means try out the tools for repacking the rom.
So after messing around compiling a ROM, I forgot to add a launcher, and now I am stuck in a bootloop. After the girl in the dress is there for awhile, I get a black screen, then reboot. Anyone now how to fix this? I have been searching Google, but can not find anything yet.
Any help would be great!
xxProphecyxx said:
So after messing around compiling a ROM, I forgot to add a launcher, and now I am stuck in a bootloop. After the girl in the dress is there for awhile, I get a black screen, then reboot. Anyone now how to fix this? I have been searching Google, but can not find anything yet.
Any help would be great!
Click to expand...
Click to collapse
I had mine half dead for a short bit until i found i could go into a low level bootloader mode and recover it. I am working on getting a the tool/images i used to recover mine uploaded and such.
Download and extract n7p_rescue_kit.zip
Reboot device using paper clip then quickly press and hold reset until you get black screen with usb plugged in
When windows wants driver give it the respective folder for your os (32bit or 64bit) from Drivers folder from the download
Run RK29update.exe if it says "Found RKAndroid Loader Rock Usb" on bottom you are good but if it shows "No Found RKAndroid rock usb" repeat last step.
Either flash all of the default selected items or do just system (since bootloop is in system)
Hope this helps
P.S. If you pack then unpack your custom one you can flash JUST system using the tool but be sure to use the offsets that are pre-loaded.
use a pin to push the reset button on the back to break out of the boot loop.
If after this your rom still bootloops, try putting a different update.img rom to flash, on to the sd card. Then boot into safe mode by holding all 4 front buttons after boot. the update should be found and installed after that.
Thanks!
I registered just to thank DocHoppy for all his efforts. I have a Nextbook Premium 7 I got for Christmas from Hastings, which fell into the YF09111XXXX batch. I used Wendal Chen's RK29xxImageTools_v2.1 to unpack the firmware upgrade from the nextbookusa site. I then put the Google apks, SuperUser, Rootexplorer, and re-packed it with a custom bootanimation. Because of my serial # I couldn't use DocHoppy rom without getting that "Invalid Update" error, but using their firmware seems to work.
My next goal is to find a way to get the "Accounts & Sync" into the settings! One of my apps is getting an "Error 42" which is an Android Market authentication error... however, other apps have worked without any problems so it's difficult to tell if that's the issue I'm having.
aberrantjots said:
I registered just to thank DocHoppy for all his efforts. I have a Nextbook Premium 7 I got for Christmas from Hastings, which fell into the YF09111XXXX batch. I used Wendal Chen's RK29xxImageTools_v2.1 to unpack the firmware upgrade from the nextbookusa site. I then put the Google apks, SuperUser, Rootexplorer, and re-packed it with a custom bootanimation. Because of my serial # I couldn't use DocHoppy rom without getting that "Invalid Update" error, but using their firmware seems to work.
My next goal is to find a way to get the "Accounts & Sync" into the settings! One of my apps is getting an "Error 42" which is an Android Market authentication error... however, other apps have worked without any problems so it's difficult to tell if that's the issue I'm having.
Click to expand...
Click to collapse
Install "Quick Sync Settings" to get to the hidden settings view.
Also did you use this guide for market? That one worked great for me.
Thanks
Working great for me so far. Thanks sharing your work.
Nice!!!
I have the image as well... Can you tell me how to open it or point me in the direction of a tutorial? I've been looking for weeks and couldnt find any info until this thread I have a yf091... as well. Thanks in advance for any help.
lost enigma 208 said:
I have the image as well... Can you tell me how to open it or point me in the direction of a tutorial? I've been looking for weeks and couldnt find any info until this thread I have a yf091... as well. Thanks in advance for any help.
Click to expand...
Click to collapse
Not sure if this rom will work for you, just guessing by your serial number. If it is to work changing between roms on these tablets is very easy. Just download the image onto the root of your sdcard, rename it update.zip (not update.zip.zip) your tablet will recognize it as an update and ask if you want to proceed. If you say yes then follow the prompts and your in business!
Sent from my NXM726HN using XDA App
Just go this to day and was plesantly suprised to find this rooted rom. Just wanted toy let you know that my S/N is YF12112xxxx and this rom work prefect for me (so far) Thanks for all the work you guys have done here. Also is there anyway to over clock the processor in out tabs?
Thanks for the comments thus far!
I would like to overclock this thing too, but that might be further down the road, as priority is on getting a different file-system for the /system volume.
Version 0.4 is coming next.
FYI:
There will be a larger span of time between updates on this particular rom for the N7p, because I will be using more stable conjumbles of things from other roms for this device. This rom is more of a remix or derivative than an entirely different rom.
Again thanks for all the hard work. I have a few requests. first since we cant change the Adhoc ( using wifi from another android device) on the fly with out RW access can you please add the ability to connect to adhoc wifi in the next build? Also i love google currents app but we cant use is on our device because we don't have map's installed. can that be added as well?
fireproof34 said:
Again thanks for all the hard work. I have a few requests. first since we cant change the Adhoc ( using wifi from another android device) on the fly with out RW access can you please add the ability to connect to adhoc wifi in the next build? Also i love google currents app but we cant use is on our device because we don't have map's installed. can that be added as well?
Click to expand...
Click to collapse
Most of the N7P roms out there now have Market installed and working. Why not just install these apps yourself?
I only suggest so because for the time being, the device is limited to its minimal capacity for apps without full-on apps2SD. Besides, for a tablet like this, you want to keep the system apps to a minimum and de-bloated for performance whenever possible.
sgtfoo said:
Most of the N7P roms out there now have Market installed and working. Why not just install these apps yourself?
I only suggest so because for the time being, the device is limited to its minimal capacity for apps without full-on apps2SD. Besides, for a tablet like this, you want to keep the system apps to a minimum and de-bloated for performance whenever possible.
Click to expand...
Click to collapse
As far air know they can not be installed with out write access. I f they can please let me know how and I will be more then ecstatic to get them both installed.thanks.
Sent from my NXM726HN using XDA App
fireproof34 said:
As far air know they can not be installed with out write access. I f they can please let me know how and I will be more then ecstatic to get them both installed.thanks.
Sent from my NXM726HN using XDA App
Click to expand...
Click to collapse
Oh I was talking about currents and maps. Both of those can be installed via market. I have them both on my tablet.
The ad-hoc networking is something worth putting in a later release though.
good mention.
Runs great
Works great on my
NextBook Premium 7
Serial: YF121121263
Manufactured: Dec 2011
I just joined and know very little about tablets
but this image is better than the rest. I'm 63 retired and would like to learn how to do what you do.
Again, thanks for your hard work.
lrmahon
Welcome. Lots of searching and trial and error ,but this is a great place to start!
lrmahon said:
Works great on my
NextBook Premium 7
Serial: YF121121263
Manufactured: Dec 2011
I just joined and know very little about tablets
but this image is better than the rest. I'm 63 retired and would like to learn how to do what you do.
Again, thanks for your hard work.
lrmahon
Click to expand...
Click to collapse
Sent from my NXM726HN using XDA App
Hola peoples!!! Ok so I just thought I'd create my own thread on this matter. Mustangtim started one in apps and themes (and here is the link to that thread) but since I'm taking over this project it was brought to our attention that this should be in the dev section as its no longer just an app.. I am actually tearing .imgs apart trying to figure out what the deuce.
FIRST OFF THIS IS A WORK IN PROGRESS, WE ARE NOT YET FULLY SUPPORTED. HOWERVER I'M DOING MY BEST TO CHANGE THAT.
Secondly if you want to help get this started please visit the market and grab the app here. Its a $3 dollar app for unlimited amount of roms, based on your SD card storage capacity anyway. And speaking of which you need AT LEAST a class 4 or better SD card to make this run smoothly.
Also feel free to visit the forums at http://forum.init2winitapps.com/
Ok so here it is, Boot Manager Pro. Its been a long time coming for the g2x to dual boot. First off let me say long story short, I currently have a bootable SD Rom, known as ROM1. I have yet to be able to recreate my findings tho. But it works and it doesnt brick at all. However it is a bit laggy on my class 4 SD card. Luckily I've already done my research on this project as there are many threads of such awesome info so I'm just going to be lazy about it and quote the good people of xda versus re-writing it based off of their info.
ChrisDDD said:
So here's a very basic description of how it works... It doesn't partition your SD card, it just creates a folder of its own, and then sub-folders to hold the different roms you install. When you install a rom, it basically creates images of the usual Android partitions - system, data, cache, & boot. These are standard .img files, just like the ones Clockwork creates when you do a backup. After the images are created and wiped (formatted, which you should do initially) it installs your rom into these essentially the same way as Clockwork installs a rom to your phone's actual partitions. I assume it modifies the kernel that comes with each rom to mount the image files on the SD card instead of the phone's partitions.
When you want to boot a rom, it just replaces your current boot image with the modified one and restarts the phone. With the modified boot image, the system, data and cache images on the SD card are mounted to the correct locations and Android starts up none the wiser. The rom will initially run a little slow, because the SD card is slower than the internal memory, but after things get cached it speed up considerably.
When you want to reboot to another rom, or back to the phone's rom, Boot Manager again swaps boot images that mount the desired rom's partitions (in the case of the phone's rom) or files (in the case of an SD card installed rom).
When you first run Boot Manager, it makes a Clockwork flash able backup of your current boot image, which you can flash if a rom hangs or loops on startup. Alternatively, you can also simply boot into recovery and do an advanced restore, choosing just the boot image to restore from a backup. It accomplishes the exact same thing.
It can be a little hit or miss, with some roms just plain refusing to start through Boot Manager, but it does work and when it does, it's pretty amazing given what it's actually doing.
Click to expand...
Click to collapse
So basically upon installing the app you need to setup your phone so that way you can properly install a ROM, follow these steps:
1. Go into the supersu(or superuser app) and then go to settings then disable logging or click none.
2. Then go into the BMP app and press the menu button on your phone, not the app, and go to settings. Once in settings put a check mark in force large boot.img, screen on during install, and then go into variables, leave tegra alone but change the sdcard block to show mmcblk1p1. Then press finish and let the app restart. By the way I didnt change any of the sizes of the .imgs but feel free to do so. But be warned do not decrease the size of the system.img only increase it, if desired.
3.Then after you've done the above you need to setup the phone rom. Click on 'Setup Phone' under phone rom and follow that process to setup your phone rom.
4. Once your phone rom is setup you may begin to install a zip to rom1 or rom2 or whatever slot you want. This is the tricky part. I have done tons of reading and most people say that if your using CWM, which us g2x'ers do, then you will probably have a better chance of getting a bootable rom by restoring from a nandroid backup you did versus installing new.
5. So after you decide which path you will take, nandroid backup or fresh rom install, choose install. If you choose a fresh rom, wipe system, data, and cache right away. If nandroid, then wipe after the install.
6. Now once you have clicked install put your phone down, DONT MESS WITH YOUR PHONE AT ALL! PUT IT DOWN AND WALK AWAY OR SOMETHING! Don’t mess with it, text from it, xda from it, dont even use the screen as a mirror!!!! lol seriously the app is picky and while under the .img creation process you want nothing to mess that up or you will not get it booted. You may however drag down the notifications bar to follow the progress of the install.
7. Once its complete, tap the install complete notification in the notification bar and let the app do its thing to finalize the install and get you back to your rom selection screen. Now if you did a nandroid back up here is where you click 'manage slot' and then factory reset the backup you did. Just do it, dont ask why.
7.1 Also so if you desire to install gapps and/or possibly a different kernel, now would be the time to do so while your here. I have read mixed reviews of doing this process right after the rom installs. However when I set up my rom1, I booted into it first all happily then realized I had no gapps. So I had to reinstall BMP on rom1 then boot back to phone rom and then I installed GB gapps and had no issues booting back into rom1.
8. Once the above steps are done if your feelin lucky go ahead and tap on boot the rom you installed, and if all goes well it will boot up.
9. If it boots up you need to post confirmation here!!! Provided info such as phone rom and the info on the sd rom you used and slot number and such.
Hopefully it will just work for you. I have done all the above steps using HFP 2.1 as my phone rom and only been able to get 1 bootable rom. Being it was for testing I used HFP as my phone rom and as well as my rom1.
So if the above steps dont wortk out for you and your boot lopped or what ever, then turn your phone off and reboot into cwm. You have 2 options to resolve the boot issue you just created. 1, you may go to restore then advanced restore then restore your boot. Or 2. select install a zip and nav to the bootmanager folder then phone rom then flash the update zip there.. then reboot and you should be back at your phone rom.
Here is a basic run down of everything that I have done so far:
When I first started working on this project I wasn’t doing any dev'ing to change any of the stuff in the boot.img. I just changed settings in the app per all the research I did. So when all was said and done I restored HFP 2.1 to ROM1 and it actually booted!! And it works lovely btw.. I can still boot into this rom today. I then decided to pass the word and ways that I created the working rom1, well I nor anyone else I passed the info to was able to get it working. Only one other person was able to confirm that rom1 works but only after I copied all my rom1 info and sent it to him for testing.. and he was able to boot into my created rom1… As I see it, it was a blue moon event that I have yet to repeat. So I thought eff it lets do some dev'in so I unpacked the boot.img from rom1 then compared that to the unpacked boot.img from rom2 that I created in my trial and error experiences. So in doing so I noticed 4 differences; 1, the mount points obviously, 2, in the sbin folder had a ueventd file from the working rom1 was a text file viewable by gedit in ubuntu. In rom2 it was just a non-readable file. 3, in the init.rc file was also missing a chmod command for system, (the command is in rom1 but not rom2) and 4, there was a ueventd.tegra file that was in rom1 that wasn’t in rom2, but everything else is the same. So I decided to plug and play with the differences to see if she boots and no go. I don’t understand why its boot looping because I am using the same rom as phone rom as for rom1 and rom2. So it boot looped. So I had to restore my boot.img many times in cwm.
So then I said eff it lets do some more research, then I noticed in the .zips folder plus the individual rom folder there are .zips that will let you flash via cwm if you get boot loops and 'should' get you booting to your desired sdrom. I then tried that way and no go.. so then I opened up the zip and had a look at the internals.. first there is the moveboot.sh file that the app runs in cwm flash the given boot.img. I then checked out the meta-inf and opened up the updater-script thinking that the app wasn’t actually flashing the boot.img which is why it loops... Well I think im half way right. However the script itself is lil dodgy... first thing I noticed was at the end of the script they have a command to cp the log from /tmp to /sdcard/bootmanager well the command was wrong so it never copied the log. So I fixed that. I also saw that the assert command was pointing to ‘boot’ instead of mmcblk0p5, so I changed that too. Then I decided to do away with the assert command and the moveboot.sh file they have going on to utilize the same functions that the kernel zips use, which is a kernel folder that holds the boot.img and a run_program that dd's the boot.img to 0p5. plus I even updated the update-binary that the file uses. I used the one from the g2x nullifier as I know that one was made for our phone and should have no issues.. plus there was a noticeable difference in the sizes of the provided binary to that replaced binary. So with the updated.zip file I then rebooted into cwm to flash that being that I was using a different command to flash the boot.img as well as the other changed stuff and still it boot looped. So as of now the only thing I don’t think ive done was grab the boot.img from rom1 then change the mount points, only change that, and then use that for rom2 and see if it boots. I don’t think I’ve done that yet. But every dam process I do I get boot loops. So basically I have came to the conclusion that it’s now NOT a boot.img issue being that I have done everything to change the boot.img and to make sure it flashes, which it does indeed and now creates the log too… I think maybe it has issues with the system.img as that’s what comes next in the boot process. But that’s just my hypothesis. I won’t be able to confirm this till I liberate rom1’s boot.img then change the mount points to point to rom2 and then see if it boots.. if it don’t work then that would mean to me that there is an issue with system.img created. But that’s just my hypothesis…
What I don’t understand is why the eff when I didnt hack the app I got a working sd-rom, but when I do change some stuff with it still don’t work!!???!! I guess maybe ill just edit/hack the apk to see what’s up.. This is getting way more complicated than it needs to be, since it worked prior to all my major changes to the script its using for flashing and the boot.img and what not. Anyone have any ideas feel free to add them.
My next steps are to edit rom1 boot.img one last time to change the mount points to point to rom2 and then if that’s a no go then it’s got to be the system.img that’s getting created. By the way this whole process I have only been restoring my nandroid backup for HFP 2.1. I have not attempted to flash new as with thru my research more times than not people would get a bootable rom via restoring versus flashing new.. so if anyone wishes to experience an sd rom let me know, ill send you a link to download my rom1 to get it going. Mind you that its not perfect and you need a class 4 or better sdcard. Everything works but it just takes a bit longer to load things and get things cached as its on the sdcard and not nand. Also if you have any input or are wishing to help pm me I need more heads to get this sorted as I can’t be the only one who knows how to edit scripts and unpack imgs and such. Either way I will continue to do this until I get it right damit!!! Oh and I just ordered a class 10 sdcard to help with this process…
That was copied from the other thread that mustangtim started. Last night when I went home the first thing I did was change the mount points on rom1 to reflect rom2, I changed nada else, then I tried to boot it... it boot looped. So maybe its a permissions issue or the system.img.
So just as a proof of concept and before anyone calls bs on my work/findings Here is the link to my rom1 that boots and is HFP2.1. *Update, 'm just going to
leave it on my DB for now till I find something better I guess. xda wont let me attach the file since its 233MB. Oh well here is the link :
Code:
[URL="http://db.tt/eBZwrOrs"][U][B]Here it is, my Rom1 HFP 2.1[/B][/U][/URL].
I have also attached my updated script file to flash back to rom1, for now.
The boot.img points to rom1 instead of phone rom, ill add to phone rom
as well, just not the now. :) Feel free to flash this via cwm versus
restoring...
Also this is part of the this: the ‘.zips’ folder you need to replace the file in
that folder as well. It’s an update file for rom1 to flash the boot.img.
..
If you’re going to use this you need install a random rom to rom1 then replace those created files in rom1 with these files in the 7z file..
So I am doing this new thread to get the devs or people with know how to help me out with my findings. I have edited the boot.img so much I could pretty much re-write everything in there by now including using magic to create to my own kernel eff!! lol jk but seriously I need people with knowhow to provide confirmation of go or no go. Basically I have people whom have helped out but It seems that I'm the only one who has dug this far into this app(unless i've been misinformed) and I have no one on my level to talk with except the init2winit devs. Which are very helpful btw.
And lastly:
Conap said:
Guys if it's failing to make the boot.img first make sure your using the market version....others have released cracked versions of our app which they broke...if your using the actual market version just send me a pm or email [email protected] and send your log.txt from BootManager folder on sdcard and we'll get it straightened out. Thanks.
Click to expand...
Click to collapse
or post here or PM me, I'm always down to help out.
Also thanks go to the init2win team, Gflam and Conap as they started this app. and as well to Mustangtim as he brought me into the light of BMP.
So you got all that???!!!??? Now lets get this party started and get full support for dual booting. I will not rest until I get this working. Thanks for your time and possible assistance.
Ok so since I have a book above I thought this is a good place for links and such...
So just incase anyone is curious, here is the Official Boot Manager Manual
Here is a nice link for Tips and Tricks while Installing ROM's that so far has good info to help you watch via adb what the BMP is doing in its creation process.
Some FAQs:
When should I set up my phone ROM?
Set up your phone ROM EVERYTIME you install a new ROM to your phone so you can get back to your phone ROM and won't get stuck on your SD ROM.
My SD ROM seems to lag how can I fix this?
SD ROM lagging may be due to a few things which all have easy fixes. First fix is that most of you have class 2 cards which are what usually come with your phones. These have a much lower read/write then cards of a higher class, we recommend a class 6 card or above. Another easy solution is overclocking merely install a better kernel and use CPU Boost (or any other overclock app) to overclock your phone.
Can I nandroid my SD ROM slots?
Yes and no you can't nandroid them in the traditional sense of the word using recovery but this app works as a recovery for your SD ROM slots and you can back up your ROM slots within the app in the Manage Installed ROMs section which works as a nandroid for your slots by fully backing up your slots to your sdcard which can later be restored.
What if I want to change the sizes of my images, how may I determine the individual sizes easily?
Easiest way is to open up terminal emulator in your app drawer. Type 'su', then grant permissions if need be, then type 'df -h' and it will display such information. You may also use adb in the same fashion. Connect via usb, open up command prompt/terminal and get adb connected and then type 'df - h' again and the same info will show. I will say this again just because, do not decrease the size of your system.img ever! Unless you want mad issues!
Here is the changlog link and just for heck of it the info based on that link:
Code:
V3.2.6
Fixed DroidX/Droid2 Install issue
Fixed UI theme issues
Fixed issue with spaces in name of pic when selecting photo for screen shot
V3.2.5
Fix to allow continue of install if no boot.img is found.
V3.2.4
Added support for HTC Rezound
Added support for rom's with multiple boot.img's
Added support for rom's made for multiple phones
AutoDetect sdcard for usb mounting
Fix for installing ICS gapps
Optimized SDRom Install process
Added support for Motorola RAZR
Added install queue
V3.2.3
Fixed issues with rom's not showing when on emmc on Droid Incredible
Fixed issues with not showing correct booted rom in app
More improvements to sms sync(all rom's will need updated app for changes to apply)
Fix issues with loader
Fixed issue with switching to backup server when main server goes down
Fixed 1x1 widget to show unlimited rom slots
Added 2x2 widget that works with unlimited rom slots
V3.2.2
Fixed force close for img's over 1Gb when resizing
Fixed current booted rom displaying correctly on gnex
Fixed issue with wrong busybox downloading on gnex which should fix alot of install/boot issues
V3.2.1
Fix for errors causing installs to fail.
Fix for some of the licensing stuff.
Removed sdbooster prefs from Galaxy Nexus(Since they don't have sdcard).
V3.2
Changed 4 sd slots to infinite slots!
Galaxy Nexus Support
Sms and Call Log synced between ROMs (you choose what ones too also requries updating boot manager in all slots)
License Check extended to a week
ROMs do not need market installed for boot manager to run (requires updating boot manager in all slots)
Hide su toasts (superuser elite only)
Fix for force close when setting screen shot in MIUI rom's
Thunderbolt defaulted to force large boot.img
Fixed unsupported device using a key
Manually setting variables only accepts numbers
V3.1.1
Fix for various force closes in rom installs and Nand restores
V3.1
Added su binary check
User selectable colors for everything
Better navigation (press title for quick action)
Added compatability for new twrp backups
Better compatiblitlity with memory tweak scripts(i.e. supercharger script and liquids default scripts)
Fix for install process being killed by android
Fix for some themes erasing img's
Fix more force closes during install
Force smaller boot.img option in settings(Fix for some phone's who's boot.img won't fit on the phone after BootManager edit's it)
Improved gapps checker
Improved security
Boot Manager now accepts keys pay for by paypal (see http://init2winitapps.com/stories/BootManager.html)
Added Evo 3d GSM Support
Added notifcation sound/vibrate for finished install (turn on in settings)
Improved data check
V3.0.3
Fix some force closes
V3.0.2
Added backup server (Sorry our server dropped out)
Fixed some force closes
2nd init fixes for Liquid's ROMs
V3.0.1
Last minute UI fixes
V3.0
UI Completely redone
Includes screen shot of each slot
Custom Info
Custom Dialogs
Custom Animations
Custom everything!
Bug Fixes
Added Droid 2 Global support
Screen shot with long press of search
V2.2.1
Bug fixes in file browsers
File browsers only show relevent files
Kernel installer fix
Droid 2 bug fix
V2.2
New security (more advanced and requires data only once a day)
Installs no longer require data
Added Italian translation thanks Black-Ice
Droid X support
Droid 2 support
Fixed status bar notifications
Fixed phone rom rebooter if gapps aren't installed
Bug fixes
V2.1
Restore android_secure to sd from nandroids
Added TWRP nandroid support
Added CWM tar nandroid support
Added Spanish translation
Made widgets easier to use
SD Booster added (Change SD read cache for better preformance)
Added current settings to manually set variables.
Added option to keep screen on during install in settings
Fixed usb layout
Updated Security
Bug Fixes
V2.0
Install now runs from the foreground (status bar)
Restore Nandroids to slots also in the foreground
User can cancel installs as they run
4 new themes added including one by apophis9283
Some phones such as tb moved to new install code (Fix for some sense rom's)
V1.3
Added third theme to app (Red Theme)
Added 4x1 widget and new widget styling
Fixed in app messenger
Added support for Htc Evo 3D
Added support for Htc Sensation
Added Support for Htc Incredible 2
Added Support for Htc Incredible S
Added Support for Htc Desire S
Added support for LG Ally
V1.2
Added option to reboot to phone rom to install gapps in license check dialog
Better error checking and error logging
Automatically install's ext2 libs if not present
Moved Set Names to Manage rom's
Fix for add-on's not installing correctly
Better compatiblility for rom's that use data2ext or apps2sd(user must set larger img's in manual variables)
Trash cleaner added to extras
Better Fix for WiFi issues on Droid 1
Added display to show what rom you are booted into
Fix for updater-script not found errors
Added support for Htc NexusOne
Added support for Htc MyTouch4G
More compatiblity for ext4 support
V1.1
Fix WiFi issues on Droid 1
Fix bug in rom installer for setting permissions correctly
Fix bug for cache size not setting correctly in setting variables manually
Fix for decimals entered into partition sizes causing force close
Fix force close in widget
Fix force closes in installer
Added Wipe data/Factory reset to Manage Rom's section
Added code to show what file's are being unzipped in dialog
Added support for rom's that extract files to sdcard so the files actually end up on your sdcard
Added support for Htc Desire (apps2sd and data2sd rom's support is experimental. Please email if you test it and it works/doesn't work)
Added support for Htc Inspire4g
Added support for Htc DesireHD
Added option to use ext4 filesystem if rom's support it-Experimental Won't work with all rom's.
Added log.txt file to sdcard to log errors during install
V1.0
Initial Release
YEZZZ
glad to finally see this here!
jookdakang23 said:
glad to finally see this here!
Click to expand...
Click to collapse
indeed... hopefully it wont be before too long that I get this app fully supported for us!
This app will be extremely useful for G2X owners and makes the G2X more versatile and desirable.
da-pharoah said:
indeed... hopefully it wont be before too long that I get this app fully supported for us!
Click to expand...
Click to collapse
idk how you get it booted. lol i keep getting bootloops
jookdakang23 said:
idk how you get it booted. lol i keep getting bootloops
Click to expand...
Click to collapse
Are you using the files I supplied or the ones that BMP created for you?
Woo hoo good job bud
Sent from my LG-P999 using xda premium
x0xhellx0x said:
Woo hoo good job bud
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
LOL thanks bro.... Go Team Hellfire!!!!
da-pharoah said:
Are you using the files I supplied or the ones that BMP created for you?
Click to expand...
Click to collapse
i remember requesting the files but think you ever sent them
jookdakang23 said:
i remember requesting the files but think you ever sent them
Click to expand...
Click to collapse
no we had a miscommunication due to our avail times and GB's lacking ability to utilize two accounts on gtalk.... I have posted those files in the op however...
First, I want to thank everyone who has helped with us on this app. Second, I know I picked the right man for the job, did you see that OP! All kidding aside, a lot of you know I write for ACS under screen name artifintel. I just had too much on my plate to give this project the attention and direction it needs. The right guy is in charge, he's a stand up person and very knowledgeable with this app. Good luck everyone!
[email protected]
I tried installing CM9, it didnt work, stuck on first boot screen after the LG logo.
I'm using rooted stock 2.3.4
Rafase282 said:
I tried installing CM9, it didnt work, stuck on first boot screen after the LG logo.
I'm using rooted stock 2.3.4
Click to expand...
Click to collapse
what rom are using as phone rom? and you installed to rom1?
da-pharoah said:
what rom are using as phone rom? and you installed to rom1?
Click to expand...
Click to collapse
As phone rom i;m using rooted stock 2.3.4 v21y
The to rom1 I installed CM9 kang from oiwan with gapps and harsh kernel
Rafase282 said:
As phone rom i;m using rooted stock 2.3.4 v21y
The to rom1 I installed CM9 kang from oiwan with gapps and harsh kernel
Click to expand...
Click to collapse
and no bootloop you say?? well then it may be the stock rom your using... The app is very picky and if you get a bootloop, I feel that those can get booted with tweaks... but stuck on lg screen is just no bueno.. Try a different rom... maybe one that has its partitions at ext3 format just to try it.. I think owains rom uses ext4, but I could be wrong. I havent fully researched his rom yet..
hands down, a badass app...
SiL3nTKiLL said:
hands down, a badass app...
Click to expand...
Click to collapse
lol +1 for sure!
da-pharoah said:
I think owains rom uses ext4, but I could be wrong. I havent fully researched his rom yet..
Click to expand...
Click to collapse
positive on ext4