Well, so far, we don't have a separate forum for Galaxy R (i9103) so I need to put in here...
OK, the kernel is ready. I have tested it using Quadrant benchmark, CF-Bench and continuous playing of asphalt6 & dungeon hunter 2 for hours. Smooth and without causing much heat
Below are the details of the kernel:
Features
=======
- For Samsung Galaxy R (i9103) only
- Based on Samsung open source, kernel version 2.6.36.3
- Added new frequencies: 1200 & 1300Mhz
- Setting of max 1300Mhz through SetCPU
- All stock frequencies are untouched: 216-1000Mhz
- Expose the voltage settings to be set through SetCPU
- Limit the boot up frequencies to be 216-1000 to avoid unstable boot up
- Simple IO Scheduler
- 2.6.36.4 patches
- Speed up framebuffer copy
- memory copy macros and functions fine tune
- Misc. kernel fixes
- Rooted (embedded su & Superuser.apk)
Download link
==========
Updated: 2011-11-16 2:40GMT
Version: 1.2
File: ardatdat_i9103_kernel_1.3G_v02_SIO.tar
Link: http://www.mediafire.com/?9d2t25rcqby5v4l
Mirror: http://www.zshare.net/download/961997663b9269b8/
MD5: 6E32FBCF65DADDFF42374218D494401A
Q & A
=====
Q: How to flash the kernel
A: Just flash the .tar file using Odin3 PDA (the same as flashing most of Samsung's android phone). Easily search xda forum for Odin3 and how to use it (http://forum.xda-developers.com/showthread.php?t=1262272)
Q: Will it delete all my applications, settings or files?
A: No. (should be..) It is a kernel, not ROM, therefore, nothing would be deleted
Q: What version of ROM is supported?
A: Kernel version is 2.6.36.3, it is proved to work on 2.3.4/2.3.5/2.3.6 ROM
Q: I don't need overclock (OC), can you make a non-overclock kernel?
A: The kernel itself supports max. of 1300Mhz. It doesn't mean that you need to operate in such frequencies. You can freely set your frequencies using SetCPU (for example, you can set 216/216 when screen off, and 216/1000). In such case, no OC will occur
Q: Will I be rooted after flashing this kernel?
A: Yes. I have modified the kernel to make it embedded with su & Superuser.apk
Q: How stable is OC? Will the battery drain fast? Will the phone get hot?
A: For 1200Mhz, it is quite stable. For 1300Mhz, I have experienced 1 program FC. Apart from that, I am using 216-1300Mhz for daily use and it is quite stable. Tested with asphalt6 and dungeon hunter 2 for over an hour, no FC occurs. Also, the battery doesn't feel hot (it is the advantage of tegra2 CPU )
Q: How can I revert back to the stock kernel?
A: If you have flashed CWM, and you have backup before you flash this kernel, you can choose (advance restore) to restore only the boot.img. Alternative method is to download the rooted stock kernel here (flash through Odin3 PDA): http://www.mediafire.com/?guhb64qy3h6sang
*** I will keep updating this kernel to make it better and better ***
*** Finally, flash at your own risk ***
=====================================================================
From the Samsung Open Source web site, I have downloaded the kernel source for i9103 and made modifications to it. It is good that this phone is equipped with Tegra2 CPU such that overclocking will not cause much heat problem and I can successfully overclocked to 1.3GHz
Below are some screen shots and I will release the kernel later today as I am still testing the new kernel.
For the first version, I will add in rooting (su+superuser.apk), SIO Scheduler, 2.6.36.4 patches and some minor kernel fixes. Stay tuned
(Quadrant score is: 4275)
Odin3 (Flash thru PDA):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Machine setting
Score in Antutu benchmark:
Faster than Galaxy S2
Quadrant score:
Recommended SetCPU settings:
reserved .......
Great news, glad to see that there is some dev for I9103!
Do you have in mind ICS cooking?
And this mod kernel is for what version? 2.3.4? 2.3.5 or 2.3.6?
Good news!!! I'm very happy with the normal CPU speed but it's good to see any developers for this device!!
Google86 said:
Great news, glad to see that there is some dev for I9103!
Do you have in mind ICS cooking?
And this mod kernel is for what version? 2.3.4? 2.3.5 or 2.3.6?
Click to expand...
Click to collapse
Well, for ICS, I have downloaded the source code (haven't compiled yet...). I think porting to ICS ROM will not be too easy ... as I lack all those hardware libraries and experiences. Let's wait ICS for Galaxy S2 and see how far we can reach...
This kernel is proved to work in 2.3.4 and 2.3.5. Should also be ok for 2.3.6
thats perfect then! I'm in 2.3.4 stock with rooted kernel, I think if you provide us a rooted kernel with optional OC that would be awesome , thanks!
Great news, thanks!
So great!!! Congratulations for your work ardatdat, could you confirm the ROM version? 2.3.4/2.3.5...
Wow,thats amazing man *-*
We are waiting impatiently your kernel
Thank you!!!
P.D: A beer for you
greets, really nice! :3
Details & download link for the kernel is updated in post #1. Try it out
Dose this work on galaxy Z ?
sorry for noob question.... if my phone not rooted can i use this kernal?
Sent from my GT-I9103 using XDA App
zam117 said:
sorry for noob question.... if my phone not rooted can i use this kernal?
Sent from my GT-I9103 using XDA App
Click to expand...
Click to collapse
Yes you can. And you wil get rooted after flashing this kernel.
Inkax2 said:
Dose this work on galaxy Z ?
Click to expand...
Click to collapse
Galaxy r=z
Please see more info on google: http://www.intomobile.com/2011/07/21/samsung-galaxy-r-galaxy-z-those-living-outside-sweden/
G R E A T !!!!!
Ps.: why on XDA do not exist a subforum dedicated to Galaxy R?
Thank you! I flashed it and works great. Although there isn't anything this phone was slow at, so only the various benchmark apps tell me it is actually faster!
Thanks for the Root kernel with OC.
Appreciate it alot.
1 step forward to get custom roms.
Can you also share which CWM you used and how ??
Thanks alot.
PS : Does this kernal work with ANY stock rom for 9103 ?
mrsaccess said:
Thank you! I flashed it and works great. Although there isn't anything this phone was slow at, so only the various benchmark apps tell me it is actually faster!
Click to expand...
Click to collapse
Try some Live wallpaper and Gallery widget slideshow, and you will notice lag, but I don't think that's related to CPU clock. Not to mention that color palette is scaled down to 65000 colors (just look at the Microbes Live Wallpaper).
---------- Post added at 02:09 PM ---------- Previous post was at 01:43 PM ----------
s4sixty said:
Thanks for the Root kernel with OC.
Appreciate it alot.
1 step forward to get custom roms.
Can you also share which CWM you used and how ??
Thanks alot.
PS : Does this kernal work with ANY stock rom for 9103 ?
Click to expand...
Click to collapse
I gues since there is no any custom roms it only works with stock ones
s4sixty said:
Thanks for the Root kernel with OC.
Appreciate it alot.
1 step forward to get custom roms.
Can you also share which CWM you used and how ??
Thanks alot.
Click to expand...
Click to collapse
There is a CWM version 4.0.0.2 that works with the phone. I just found (and flashed) today myself.
I found it at a Chinese forum and at a Spanish forum. Downloaded from both and had the same flashable tar (checked with diff), though different apks (which I didn't install anyway).
Try it from here: http://www.megaupload.com/?d=Q33VEDF0
I am terribly sorry but I can't find from which forum I originally got this link. It isn't mine work of course.
After flashing with ODIN (the same way you flashed the rooted kernel), to enter into recovery turn on the phone and while it is on the Galaxy R boot screen, press voulme up and home together. Do not press them before powering on because your phone won't turn on, instead it may block and you will have to remove the battery for some seconds.
---------- Post added at 05:43 PM ---------- Previous post was at 05:38 PM ----------
nedooo said:
Try some Live wallpaper and Gallery widget slideshow, and you will notice lag, but I don't think that's related to CPU clock. Not to mention that color palette is scaled down to 65000 colors (just look at the Microbes Live Wallpaper).
Click to expand...
Click to collapse
Will do!
Related
Huge thanks to the many talented developers out there including (in no particular order) but not limited to:
chris41g, mkasick, Rodderik, nubecoder, earthbound, toadlife, thomasskull666, DRockstar, supercurio, Ezekeel, SenseiSimple, noobnl, xcaliburninhand, k0nane
See the feature table below the download section. I've maintained the same features in all the kernels (except where noted), so just download the corresponding kernel for your EL30 ROM and flash in CWM.
There seems to be some confusion around. Just because you are on the EL30 modem, does NOT mean you are on an EL30 ROM.
***This is the thread for the EL30 Shadow Kernels. If you need the EI22, CM7, or MIUI kernels, see this thread.***
**To help with bug posts, please state which kernel version and ROM you are running. Thank you.**
------------------------------------------------------------------------------
BML
CWM - Download ShadowKernel-EL30-v2.0+OC/UV [Mirror]
ODIN - ShadowKernel-EL30-v2.0.tar.md5 [Mirror]
MD5: 18119924f14e230f6a9706ceec08ffa1
**Place this in ODIN PDA slot to give you the Root and CWM in one quick step. Best method for users on Stock EL30 without CWM.**
------------------------------------------------------------------------------
MTD
Download ShadowKernel-EL30-MTD-v3.0+OC/UV
------------------------------------------------------------------------------
Features:
- Root
- Ext4 support
- init.d support
- 3 button hard reset
- kexec support
- bootanimation.zip support
- Linux wired tether (RNDIS) support
- Installs Bash if not present
- Reboot to CWM Recovery support
- Built-in TUN, CIFS, FUSE, & TCPMSS
- Keyboard & other mkasick patches
- Additional CPU Governors: SmartassV2 & interactiveX
- Additional I/O Schedulers: BFQ & SIO
- Overclocking/Undervolting support up to 1.4GHz with Voltage Control support. (Added 600, 900, 1100, 1200, 1300, & 1400)
- Voodoo Sound (use the free Voodoo Control App)
- Voodoo COLOR (also in the free Voodoo Control App)
Much more to come.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Additional Resources:
See this thread for color setting discussion, but remember to experiment and find the right settings for you:
http://forum.xda-developers.com/showthread.php?t=1002090
this one for me
reserved just in case
Woot my first first
Now i just need a good rom
Sent from my Kindle Fire using xda premium
AOD_Corwin said:
Woot my first first
Now i just need a good rom
Sent from my Kindle Fire using xda premium
Click to expand...
Click to collapse
They'll be coming soon enough. I just didn't want them waiting on a kernel.
Made the mistake today thinking i could run the el30 hot spot hack just cause i had the modem. Had to pit back to ec05 to fix that mess. They cant come fast enough for me.
Sent from my Kindle Fire using xda premium
so if Im on cm7 nightly el30 this Kernel would work or not? sorry if doesnt make sense
seoulseek80 said:
so if Im on cm7 nightly el30 this Kernel would work or not? sorry if doesnt make sense
Click to expand...
Click to collapse
You need to stick with the other kernel thread for CM7 kernels. Link is provided above the downloads in the OP.
bbelos said:
You need to stick with the other kernel thread for CM7 kernels. Link is provided above the downloads in the OP.
Click to expand...
Click to collapse
gotcha. thats what I figured
Thank You Kindly 4 This EL30 Kernel and THX 4 Help 2 Get Me Back 2 Rooted from a stock EL30 start in just ONE Very Easy Step !!!
TexasEpic4G said:
Thank You Kindly 4 This EL30 Kernel and THX 4 Help 2 Get Me Back 2 Rooted from a stock EL30 start in just ONE Very Easy Step !!!
Click to expand...
Click to collapse
You're welcome. Caught me before I even had a chance to post it.
I have added an ODIN Tar to the OP. Works for anyone, but it's mainly for users on completely stock EL30, such as after the OTA update, or after using toadlife's ODIN packages. It will give you the Rooted EL30 ShadowKernel and CWM 5.0.2.7 all in one step.
This should be obvious, but DO NOT use if you are on an MTD ROM.
bbelos said:
You're welcome. Caught me before I even had a chance to post it.
I have added an ODIN Tar to the OP. Works for anyone, but it's mainly for users on completely stock EL30, such as after the OTA update, or after using toadlife's ODIN packages. It will give you the Rooted EL30 ShadowKernel and CWM 5.0.2.7 all in one step.
This should be obvious, but DO NOT use if you are on an MTD ROM.
Click to expand...
Click to collapse
I can vouch this works = very easy .......... once again , the ODIN tar is ONLY for folks currently Stock EL30 Non-Rooted
---------- Post added at 11:52 PM ---------- Previous post was at 11:11 PM ----------
here's a little sumthing 4 ya bbelos and 4 anyone who uses this kernel
http://i1202.photobucket.com/albums/bb374/TexasEpic/ShadowKernel.png
TexasEpic4G said:
I can vouch this works = very easy .......... once again , the ODIN tar is ONLY for folks currently Stock EL30 Non-Rooted
---------- Post added at 11:52 PM ---------- Previous post was at 11:11 PM ----------
here's a little sumthing 4 ya bbelos and 4 anyone who uses this kernel
http://i1202.photobucket.com/albums/bb374/TexasEpic/ShadowKernel.png
Click to expand...
Click to collapse
My first banner. Very nice. I'm honored.
TexasEpic4G said:
I can vouch this works = very easy .......... once again , the ODIN tar is ONLY for folks currently Stock EL30 Non-Rooted
---------- Post added at 11:52 PM ---------- Previous post was at 11:11 PM ----------
here's a little sumthing 4 ya bbelos and 4 anyone who uses this kernel
[IMG]http://i1202.photobucket.com/albums/bb374/TexasEpic/ShadowKernel.png[/IMG]
http://i1202.photobucket.com/albums/bb374/TexasEpic/ShadowKernel.png
Click to expand...
Click to collapse
I love sonic!!!
Sent from my SPH-D700 using Tapatalk
Wow using this on sleeper rom el30 mtd and its running really well... staying nice and cool... running the n64oid at 1400mhz and can't even get it up past 102 degrees! Awesome job... this is the first of the shadow kernel series that my phone has liked... of course I haven't used it since you added oc to the ei22 kernel... impressive job bbleos! Thanks!
Sent from my SPH-D700 using Tapatalk
Nice !!
Awesome Coronel
Just flahed 3.0 tw mtd version of this over an alpha build of thunderhawk 4.0 EL30. In about phone it still shows tw mtd v0.5+oc. Can anyone confirm proper tags after flashing over any EL30 rom?
Edit: a mtd el30 rom that is...
jeffro18 said:
Just flahed 3.0 tw mtd version of this over an alpha build of thunderhawk 4.0 EL30. In about phone it still shows tw mtd v0.5+oc. Can anyone confirm proper tags after flashing over any EL30 rom?
Edit: a mtd el30 rom that is...
Click to expand...
Click to collapse
I just downloaded it fresh (dev-host sucks now) and reflashed it (I even flashed a different kernel first ) and I see it properly displaying Shadow-EL30-MTD_v3.0+OC.. so uh.. bad download? Were you on kernel v0.5 before flashing kernel v3.0?
bbelos said:
I just downloaded it fresh (dev-host sucks now) and reflashed it (I even flashed a different kernel first ) and I see it properly displaying Shadow-EL30-MTD_v3.0+OC.. so uh.. bad download? Were you on kernel v0.5 before flashing kernel v3.0?
Click to expand...
Click to collapse
Yup, definitely a bad download. I should have known since random's 3.4 gave me similar issues earlier thanks to dev host. Sorry, I have been doing some crazy multitasking between kids, setting up my brother in law's fascinate, and other distractions. I see the file was only 10kb now that I have a minute to breathe and focus on my rig again. Thanks for your always quick support. I'll get it to properly flash in a bit and throw you some feedback. Tomorrow is my first day off in 14 days, so I can give it a good run down. Totally forgot about this kernel untill today lol.
Sent from my SPH-D700 using xda premium
It seems like all dev-host files are only being downloaded as 10kb files when downloading on the phone. Must be due to the new page design or something. They seem to download fine from a computer. I will be moving away from dev-host if it stays like this.
Sent from my SPH-D700 using XDA App
[Kernel][9/5] - CleanKERNEL 1.2 -★| CPU OC 1.99 | GPU OC 300/500 | UV | VRALG1 |★-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This Kernel is only compatible with ROMS running on the VRALG1 Base!
Do not use this kernel on any base newer than that!
This Kernel is NOT compatible with the latest version of CleanROM!
Features
CPU Overclockable to 1.99 GHZ (vs 1.5GHZ stock).
CPU Underclockable to 192MHZ (vs 384MHZ stock).
The CPU comes clocked at normal Samsung specs of 384MHZ low and 1.5GHZ high. You will need an application like System Tuner or Set CPU to overlcock it. This can also be modified by advanced users in the init.rc but is not recommended or supported. See first two blocks of init.rc for details.
GPU Overclocked at 300/500 MHZ
Under-volted just a few milli-volts to help save battery.
There are no fancy governors or other such things. Its a modified stock kernel, plain and simple.
This kernel should be compatible with any VRAGL1 based ROM such as (of course) CleanROM and Nosympathy's stock rooted base. Good chance it will work well with Team Synergy's ROM too but I have not tested that ROM but its a VRALG1 Based ROM.
If your ROM has non Samsung Boot Animation you will more than likely loose it!
Its been said that flashing a kernel can cause IMIE loss. I have not seen it myself but I guess its possible.
This kernel will NOT work with any AOSP, AOKP, CM9, CM10, etc based ROMS! If the ROM is not a based on official Verizon VRAGL1 ROM then dont flash this kernel!
Instructions
Must have an UNLOCKED BOOTLOADER! No exceptions!
Should make a complete Nandroid back up before flashing!
Copy ROM to storage and flash
Use your favorite CPU controller app to set the speeds.
WARNING!
Overclocking can permanently ruin your device. I mean totally kill it! You accept this fact upon downloading the kernel and or source!
I cannot and will not take any responsibility for what this kernel does to your device!
Not all devices can maintain the same level of overclocking!
Just because the kernel can clock to 1.89 does not mean YOUR device can!
Be smart and start off low and bring upt the speed gradually just like O/C'ing a desktop CPU!
To return to what you had before this... Restore your Nandroid back up! You did make that back up, right?
Changes in this version
9/5/12 - Version 1.2
Added: O/C to 1.99
Possibly Fixed: O/C not OC'ing on some devices
Possibly Fixed: gsiff_daemon fix?
Added: Optimaztions to file system
THANKS!
Thanks to dsb9938 for helping me get my box set up and to sbryan12144 for schooling me on the edits to make. Without their help I would still be looking at an empty Ubuntu desktop wondering where to go!
This Kernel is only compatible with ROMS running on the VRALG1 Base!
Do not use this kernel on any base newer than that!
This Kernel is NOT compatible with the latest version of CleanROM!
Downloads
Kernel HERE
MD5: F69F8AA037DCA3C03D5E6B22656FE684
Source HERE
MD5: 20907545F7CD5DF5717EA0101FFF054F
Donations accepted but not expected :angel:
Please hit Thanks and Rate the thread 5 Stars
Click to expand...
Click to collapse
Benchmarks dont matter! But your going to ask anyways so I already ran the three most popular benchmarks and the results are below. Your device and ROM set up may NOT acheive these benchmarks.
All testing was done on a fresh install of CleanROM 2.0 SP1 with no background sync 1.89GHZ and Ondemand governor.
These benchmarks are the best of 3 or 4 runs each. They didint vary too much from this except Linpack. That thing is all over the place.
Do not expect to get these scores!
Next your going to ask me how the battery life is. Being a new kernel it doesnt have as much metering under its belt so you I will need your input on what you see. Obvisouly if you clock it up high you will see a decrease in battery life. Let me know what you are seeing.
Change Log
9/5/12 - Version 1.2
Added: O/C to 1.99
Possibly Fixed: O/C not OC'ing on some devices
Possibly Fixed:gsiff_daemon fix?
Added: Optimaztions to file system
8/24/2012 - Version 1.0
Initial Release
looks awesome
Excellent work!
Sent from my SCH-I535 using xda premium
WizeGuyDezignz said:
Excellent work!
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Thank you man!
on syn r52, clean kernel doesn't support bootanimation ?
can you add MD5 to post
Karl said:
on syn r52, clean kernel doesn't support bootanimation ?
can you add MD5 to post
Click to expand...
Click to collapse
MD5's posted....
As stated in OP...
This kernel is based of the Samsung stock kernel for the Verizon based SGS3. The kernel does not deviate from the stock kernel except as noted below...
Click to expand...
Click to collapse
In other words... No. Thats a Ramdisk edit anyways and not a kernel edit if I am not mistaken, no?
scrosler said:
MD5's posted....
As stated in OP...
In other words... No. Thats a Ramdisk edit anyways and not a kernel edit if I am not mistaken, no?
Click to expand...
Click to collapse
my bad just glanced at the op :silly:
Karl said:
my bad just glanced at the op :silly:
Click to expand...
Click to collapse
Its all good. I will post modified RAM disk that supports non Samsung boot animations later on... I just want to get a feel right now for the kernel and how it works out for people.
EDIT: But you do bring up a good point... I will post in the OP that you will loose custom boot ani's.
Nice work Scott, first kernel for the Verizon gs3 that under clocks the cpu!
Does it include a fast charge option??
Thanks again for your work! :good:
joaquinla1 said:
Nice work Scott, first kernel for the Verizon gs3 that under clocks the cpu!
Does it include a fast charge option??
Thanks again for your work! :good:
Click to expand...
Click to collapse
No fast charge. It only modifies the stock samsung speeds of CPU, GPU and Voltage.
No other changes.
CPU Underclock to 192MHZ may need some tweaking. But I am pretty sure I know what it is... Seems to stick more at 384 than 192.
scrosler said:
No fast charge. It only modifies the stock samsung speeds of CPU, GPU and Voltage.
No other changes.
CPU Underclock to 192MHZ may need some tweaking. But I am pretty sure I know what it is... Seems to stick more at 384 than 192.
Click to expand...
Click to collapse
I'm using CPU master and after clicking apply like 10 times it stuck at 192.
Guys keep in mind that by flashing a custom kernel you risk losing your IMEI number. This can happen at any time while running it, not just the act of flashing. It can be restored (even without a backup) but there's a good chance you'll be stuck in roaming afterwards. I've seen several people ask how to get out of roaming but they never receive concrete responses.
Several people have claimed this can only occur on AOSP roms/kernels, but this is false. I've heard reports of people losing IMEI on beans rom using imo's custom kernel.
Good job man
joaquinla1 said:
I'm using CPU master and after clicking apply like 10 times it stuck at 192.
Click to expand...
Click to collapse
Nah, its sticking when you apply, but the thermald config may need some tweaking because it pushes it back up. So it doesnt seem like its sticking but its but then it gets overwritten.
Div033 said:
Guys keep in mind that by flashing a custom kernel you risk losing your IMEI number. This can happen at any time while running it, not just the act of flashing. It can be restored (even without a backup) but there's a good chance you'll be stuck in roaming afterwards. I've seen several people ask how to get out of roaming but they never receive concrete responses.
Several people have claimed this can only occur on AOSP roms/kernels, but this is false. I've heard reports of people losing IMEI on beans rom using imo's custom kernel.
Click to expand...
Click to collapse
Wow, Thats crazy!
How does that happen?
sbryan12144 said:
Good job man
Click to expand...
Click to collapse
I learned from the best!
Div033 said:
Guys keep in mind that by flashing a custom kernel you risk losing your IMEI number. This can happen at any time while running it, not just the act of flashing. It can be restored (even without a backup) but there's a good chance you'll be stuck in roaming afterwards. I've seen several people ask how to get out of roaming but they never receive concrete responses.
Several people have claimed this can only occur on AOSP roms/kernels, but this is false. I've heard reports of people losing IMEI on beans rom using imo's custom kernel.
Click to expand...
Click to collapse
please provide reference
Karl said:
please provide reference
Click to expand...
Click to collapse
Dont stress it... He said what he had to say. Maybe he is right. I put in the OP so...
Lets get to some feedback on the kernel itself...
This thing is lightning fast and has same battery life as stock. Been hammering on it all night
Sent from my Nexus 7 using Tapatalk 2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Newest change logs are available at the AOKP site
Flash Rom in CWM or TWRP
Wipe data/factory reset if you are coming from another ROM
Flash the zip
Wipe cache/dalvik cache
Then flash GApps.
Reboot
Download My Semi-Nightly Builds:
androtransfer.com/?developer=cmenard
Download Official Milestone 1
androtransfer.com/?developer=AOKP
GApps: http://goo.im/gapps
What works:
Samsung Keyboard Dock
Almost Everything
What doesn't work:
IR Blaster?? A WIP
You tell me...
Kernels
The same custom kernel used in AOKP ROMs now available to use in all AOSP based ROMs. (AOKP, CM10, ParanoidAndroid) Will not work with stock Touchwiz based ROMs!!
These use the anykernel flash method so it creates a new boot.img on the fly. It will not interfere with any customizations that may be in your current boot.img's ramdisk.
Download Kernel
androtransfer.com/?developer=cmenard&folder=Kernels
AOKP's Source can be found here: Github
=======================================================================================
Thanks to:
AOKP Team
codeworkx and Teamhacksung for the initial CM10 work
Please do not copy and paste this post anywhere else. Always point the post to this thread since it will always have the most recently updated version. Thank you and enjoy the Jelly Bean infused Unicorns!
=======================================================================================
9/30/2012
Among the many updates and fixes in Build-4 we have a new kernel. Keeping the trend alive we have yet another first for our Tablets. Voltage Control!! You can use Performance Settings in ROM Control to set voltages, SetCPU and a few other apps available on the market work as well. NOTE don't set any voltages at boot until you are once again 1000% sure your device is stable. It's pretty safe to UV 1GHz and below, just use small 25mv steps to begin with. 1.2GHz is close on most devices, speeds above that I wouldn't mess with too much. Remember all devices are different, so there aren't any magic voltages that will make you want to throw away your charger. Use common sense and have fun tinkering.
New kernel AOKP_p51xx_1-52GHz_v2-2.zip posted.
9/21/2012
I've built and uploaded a new kernel that includes a few more OC options. Configured now are 1.2GHz, 1.35GHz, 1.42GHz, 1.48GHz, and 1.52GHz. There have been a few other tweaks made that all add up to FAST. Remember your device may not be able to handle the same speeds as someone else's. Don't cry or feel bad, it's just the hardware luck of the draw. Just like people, there are some freaks out there. The new kernels have 1-52GHz in the file name. Now go forth and flash!!
9/17/2012
New Another overclock option!
New Semi-Nightly Sept. 16/17 builds now include a 1.42GHz step. Kernel still safe boots to 1.2GHz and you can use built-in Performance settings or SetCPU to OC. I wouldn't recommend using "set at boot" until you're 1000% sure your device is stable at 1.42GHz.
Working Samsung keyboard dock
While not all the special keys work it's a start
On the fly GPU Overclocking
Another first for our tabs! Based on imoseyon's Tuna kernel work. To change speeds simply edit /sys/devices/system/cpu/cpu0/cpufreq/gpu_oc. Values are as follows: 0 = 307MHz 1 = 384MHz 2 = 512MHZ
On top of the built in 1.2GHz overclock my tab runs really well at 512MHz. Be mindful the higher GPU freqs will cause an increase in heat production. The values will revert back to 0 (307MHz) on boot. So if you find your tab locked up or acting odd at a higher clock speed just reboot it. On the other side of that you'll need to change the value every time you boot the tablet.
Some nenamark2 scores to illustrate the GPU overclock....
Value 0 = 307MHz
Value 1 = 384MHz
Value 2 = 512MHz
Thanks everyone for following my AOKP thread. Its now time to pass it on..
Enjoy!
scottx . said:
Thanks everyone for following my AOKP thread. Its now time to pass it on..
Enjoy!
Click to expand...
Click to collapse
Thanks Scott for originally posting this here!
Hi,
Oh yeesss:good:, i tested your rom for GT-I9100 ...beautiful :laugh:
Download links are not working!
Notice: Undefined variable: folderReadme in /home/website/www/androtransfer.com/public_html/index.php on line 291
Click to expand...
Click to collapse
cornelpopa said:
Download links are not working!
Click to expand...
Click to collapse
That error doesn't stop you from downloading from the left menu.
Works really nice on 5110! Just wanna say thanks for the work & share.
It´s very very smooth and as compared to 4.0.3/4.0.4 Stock i think its like WARP 7
Just one Question: Is there any Way to change Fahrenheit to Celsius in Lockscreen-Weather?
On Homescreen i got Celsius working after changing it in settings... but Lockscreen still points F...
screenshots???
cmenard said:
Newest change logs are available at the AOKP site
Flash Rom in CWM or TWRP
Wipe data/factory reset if you are coming from another ROM
Flash the zip
Wipe cache/dalvik cache
Then flash GApps.
Reboot
Download My Semi-Nightly Builds:
androtransfer.com/?developer=cmenard
Download Official Build-2
androtransfer.com/?developer=AOKP
GApps: http://goo.im/gapps
What works:
Samsung Keyboard Dock
Almost Everything
What doesn't work:
IR Blaster?? A WIP
You tell me...
AOKP's Source can be found here: Github
=======================================================================================
Thanks to:
AOKP Team
codeworkx and Teamhacksung for the initial CM10 work
Please do not copy and paste this post anywhere else. Always point the post to this thread since it will always have the most recently updated version. Thank you and enjoy the Jelly Bean infused Unicorns!
=======================================================================================
Click to expand...
Click to collapse
Some screenshots would be nice.....
blahquader said:
Works really nice on 5110! Just wanna say thanks for the work & share.
It´s very very smooth and as compared to 4.0.3/4.0.4 Stock i think its like WARP 7
Just one Question: Is there any Way to change Fahrenheit to Celsius in Lockscreen-Weather?
On Homescreen i got Celsius working after changing it in settings... but Lockscreen still points F...
Click to expand...
Click to collapse
It just has to update. Default is 60 minutes, you can click "get weather" in the top right of weather settings in ROM Control to force it to happen. That will update the lockscreen to show C instead of F.
cmenard said:
It just has to update. Default is 60 minutes, you can click "get weather" in the top right of weather settings in ROM Control to force it to happen. That will update the lockscreen to show C instead of F.
Click to expand...
Click to collapse
Tried that - but it changed nothing, the F stays in Lockscreen
Any other Ideas?
One more Question - where can i find this "Kill-all-Button" after activation in settings?
blahquader said:
Tried that - but it changed nothing, the F stays in Lockscreen
Any other Ideas?
One more Question - where can i find this "Kill-all-Button" after activation in settings?
Click to expand...
Click to collapse
Kill all isn't working on the Tablet Recents menu yet. The Tablets still have some work to be done to get all the NavBar and Status Bar tweaks working.
Does anyone know why Build 2 wasn't released for the p5113?
pilotgav said:
Does anyone know why Build 2 wasn't released for the p5113?
Click to expand...
Click to collapse
I think they just stopped the build before it ran or was completed. My "semi-nightly" is essentially Build-2 with an updated kernel and keyboard dock support...
cmenard said:
I think they just stopped the build before it ran or was completed. My "semi-nightly" is essentially Build-2 with an updated kernel and keyboard dock support...
Click to expand...
Click to collapse
Installed and very pleased
Sent from my SGH-I727 using xda app-developers app
No Navbar custom icons the rest looks great so far!
cmenard said:
Kill all isn't working on the Tablet Recents menu yet. The Tablets still have some work to be done to get all the NavBar and Status Bar tweaks working.
Click to expand...
Click to collapse
the_one_ said:
No Navbar custom icons the rest looks great so far!
Click to expand...
Click to collapse
Yup... Answered a few posts above yours.
Aug27 is working great for me (P5113).
the_one_ said:
No Navbar custom icons the rest looks great so far!
Click to expand...
Click to collapse
Must be a 51xx issue because I always use custom navbar icons on my 3113.
Hi,
My Tablet disconnects WiFi all 20 Minutes.
I use it for listening to Webradio via a app. So i start the app, hit play and put the Tablet in Standby.
Exactly after 20 Minutes it stops playing. After unlocking i see the notification "no internet connection" in statusbar. It automatically reconnects to Wifi then, and i can hear music for 20 Minutes again. I havent that syndrome with stock ROM. (Same App, same Accesspoint).
Any Ideas how to fix that?
regards!
PS: Everything is working fine when power adapter is connected.
I ported Cyanogenmod 9 for the Hero build by Jordfaz. (Thanks to him!)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Downloadlink: Cyanogenmod 9
Installation:
- Flash Lights_format_all (See other thread!)
- Flash CM9
- Reboot
- 32B: Flash a 32B kernel after flash of the ROM
After installation
- After boot: Go to ADWSettings - system - advanced - enable wallpaper hack and scroll cache: low quality --> This will fix your UI.
- To disable CRT-animation: Displays - animation OFF (Thanks toi SaySpaceman! ;p)
Working:
- Calls/SMS
- Data
- Youtube!
- Screenshot!
- Perfect rotation!
- ...
Not working:
- Bluetooth
- GPS
Changelog:
Code:
-- Cyanogenmod 9 --
v1.0
* Initial release
Hit the THANKS button, if you use this ROM!
I will complete this thread at a later time, but for the next month I'll have to study a lot , so maybe no time for uploading and completing thread.
You can disable the CRT animation. You go to Settings->Display->You turn off the Screen off animation.
I haven't found any bugs yet, everything works very smooth and even YouTube works! :good:
I think this is the best ROM for our "legacy" device
SaySpaceman said:
You can disable the CRT animation. You go to Settings->Display->You turn off the Screen off animation.
I haven't found any bugs yet, everything works very smooth and even YouTube works! :good:
I think this is the best ROM for our "legacy" device
Click to expand...
Click to collapse
Thank you! Didn't know you could manually enable/disable it.
i really want to try this rom in my old htc magic!
I would like to know wich recovery do you use and recommend to flash your rom.
another question is the funcionability of the apps with this rom
thank you for all your work for "our" device.
stiker said:
i really want to try this rom in my old htc magic!
I would like to know wich recovery do you use and recommend to flash your rom.
another question is the funcionability of the apps with this rom
thank you for all your work for "our" device.
Click to expand...
Click to collapse
I think you can only flash it with CWM recovery.
All apps that work on GB, will work in ICS.
But the Play Store will show a lot more apps, but a lot of them will force close when you try to open them.
But in general, everything should be smoother.
ok. This rom is good. But it is slow when download from playstore. Thanks!
Thanks for CM9, i was looking for some stable rom
I will try this ROM and will let u know my findings
Thank you for porting this over. I have neglected my HTC Magic for quite some time now, finally got it out, dusted it and went through the flashing bits for this. Stable and much smoother than I expected to have on a (relatively) dated device. Are the processor options under 'Performance' settings disabled or is it meant to be on 'ondemand' all the time?
Yanguang said:
Thank you for porting this over. I have neglected my HTC Magic for quite some time now, finally got it out, dusted it and went through the flashing bits for this. Stable and much smoother than I expected to have on a (relatively) dated device. Are the processor options under 'Performance' settings disabled or is it meant to be on 'ondemand' all the time?
Click to expand...
Click to collapse
You can't change any options in Performance. I'll see if I can change that, because now, if the displayed CPU speeds are right, the CPU is constantly running on 710 Mhz when you used it.
Default cpu frequence 710MHz is not stable enough to bootup my phone, could you please lower down to 650MHz please?
jejer said:
Default cpu frequence 710MHz is not stable enough to bootup my phone, could you please lower down to 650MHz please?
Click to expand...
Click to collapse
Did you try to flash it? My phone doesn't run on 710 either, but it does boot.
Yes, I flashed it. During boot, cat /proc/cpuinfo get 710MHz and boot failed. After set it to 620MHz, it bootup success.
Your ROM works great, thanks!
jejer said:
Yes, I flashed it. During boot, cat /proc/cpuinfo get 710MHz and boot failed. After set it to 620MHz, it bootup success.
Your ROM works great, thanks!
Click to expand...
Click to collapse
Ok, thanks! I'll set it to a lower speed in next version.
I would really advise against overclocking by default. The majority of these devices can overclock to acceptable speeds, but others can't do much at all. My mytouch 3g, for example, would freeze at anything above 595mhz, and it was most stable at 537 or below. So even with that lower overclock you decided on, I still wouldn't be able to use this without modifying the rom.
There are plenty of ways to make this recommended, but optional. You could put an oc script in a separate zip to flash. Or you could start using the fancy Aroma installer. Ezterry's yesno binary is really easy to implement.
tvall said:
I would really advise against overclocking by default. The majority of these devices can overclock to acceptable speeds, but others can't do much at all. My mytouch 3g, for example, would freeze at anything above 595mhz, and it was most stable at 537 or below. So even with that lower overclock you decided on, I still wouldn't be able to use this without modifying the rom.
There are plenty of ways to make this recommended, but optional. You could put an oc script in a separate zip to flash. Or you could start using the fancy Aroma installer. Ezterry's yesno binary is really easy to implement.
Click to expand...
Click to collapse
I didn't know the cpu was running at a higher speed. I thought it was a bug in performance section, who was showing the wrong speed, since my HTC Magic normally freezes at 710 Mhz.
It's been years since I last flashed a MyTouch3G (32B)... Just got back one that I'd gifted away two years ago, it decided not to boot around Christmas and I brought it home to wipe/reflash.
Glad to see work still being done on this old device! It's ahead of my G2X in Roms.. That's effin sad.
Now if I can just remember how you flash a kernel on this thing....
EDIT:
I'm a bit confused about the kernel.... the thread linked doesn't actually seem to be any specific kernel??? More "how to flash a kernel safely" and hboot/radio files. I already have the required hboot/radio! So which kernel do I use??
EDIT 2:
N/m.... can't be assed to sit here all night trying to figure out which kernel to use on an antique phone. Went with Gingerbread instead.
tutorial and links - SPL/radio/ROM
lotherius said:
It's been years since I last flashed a MyTouch3G (32B)... Just got back one that I'd gifted away two years ago, it decided not to boot around Christmas and I brought it home to wipe/reflash.
Glad to see work still being done on this old device! It's ahead of my G2X in Roms.. That's effin sad.
Now if I can just remember how you flash a kernel on this thing....
EDIT:
I'm a bit confused about the kernel.... the thread linked doesn't actually seem to be any specific kernel??? More "how to flash a kernel safely" and hboot/radio files. I already have the required hboot/radio! So which kernel do I use??
EDIT 2:
N/m.... can't be assed to sit here all night trying to figure out which kernel to use on an antique phone. Went with Gingerbread instead.
Click to expand...
Click to collapse
<<Check my signature below!>>
<<Goog flashing>>
Edited post (correction below)
Sorry for the wrong info on flashing your 32B device, I did not notice that your device was not a 32A sapphire but the 32B instead!
I think the answer you're looking for is here:
[ROM][WIP] United ICS - http://forum.xda-developers.com/showthread.php?t=1647493
"kernel -
ezterry's kernel + ics patches and some performance tweaks (enabled 710mhz overclock and other things) http://www.mediafire.com/?py8asp6ab109dyl
ezterry's ezgb 1.5.2 http://sandbox.devnull.name/android/ezgb-kernel/ezgb-2636-v1.5.2_S.zip "
<< info from tvall - http://forum.xda-developers.com/member.php?u=3038499 >>
lotherius said:
It's been years since I last flashed a MyTouch3G (32B)... Just got back one that I'd gifted away two years ago, it decided not to boot around Christmas and I brought it home to wipe/reflash.
Glad to see work still being done on this old device! It's ahead of my G2X in Roms.. That's effin sad.
Now if I can just remember how you flash a kernel on this thing....
EDIT:
I'm a bit confused about the kernel.... the thread linked doesn't actually seem to be any specific kernel??? More "how to flash a kernel safely" and hboot/radio files. I already have the required hboot/radio! So which kernel do I use??
EDIT 2:
N/m.... can't be assed to sit here all night trying to figure out which kernel to use on an antique phone. Went with Gingerbread instead.
Click to expand...
Click to collapse
You have to take a working 32B kernel, preferably a flashable zip. The link in the opening post isn't directing to a kernel, but search for it in the G1 section and you will find a lot kernels.
ICS is much faster, so I would suggest you try it.
Can you point me into the right direction? My dad has an old Magic 32B with Radio 27.08. What Kernel should i use? Or what ICS Version are you talking about?
Thanks in advance.
when is out the final version?
Hello,
Before start working on the kernel 3.0 branch, I think we should have a good kernel for CM10A4 because 3.0 would take a while. So, I created this kernel.
Release:
Final - Jan 2, 2013
This is the final release. Only minor optimization are included. Dhiru already patched all necessary code to his kernel. I though about backporting DSSCOMP and ION but it seems not worth it. From now on I'll focus on the 3.0 branch. Happy new year to all. :laugh:
R1 - Dec 28, 2012
Overclock to 1.35GHz but boot at stock (Vurrut)
No signal fixed (loSconosciuto)
Noop, CFQ, SIO schedulers
Various governors
Based on Dhiru CM10 kernel
How to flash:
- Download it to your storage
- Reboot to recovery
- Flash it as a zip file.
How to restore to stock:
Download and flash "kernel-cm-10-A4-restore.zip" from this thread http://forum.xda-developers.com/showthread.php?t=2029921
Disclaimer:
As always, It is your responsibility to use this. I wouldn't take any blame.
All credits are given to:
- Dhiru
- Vurrut
- XDA_Bam
- loSconosciuto
- Adi_Pat
- UtterChaos
kool will give it a try
Features??
Thanks. But please post details such as governors and IO schedulers, boot @ 1GHz etc.
now we have 3 devs working on kernel 3.0 ))really nicee
:good:
Guys, try it out. If you don't like it, you can reverse to standard CM10A4 anytime.
Thanks for this crackerizer. I Was just recently thinking about the lack of an overclock kernel for Alpha 4 and you came up with this. Great job! :highfive:
Just the type of steriods needed right now
Thanks bro
Flashing it right away
Edit: kernel works properly, no issues yet.
rom is now much smother
Will report battery after 2-3 cycles.
Sent from my GT-I9003 using xda premium
1200MHz - very unstable
When I was on bam kernel (gingerbread), my phone was very stable (OC 1200), no random reboots or something like that.
On this kernel - 5min and 3 reboots and a lot of FCs :/
Edit:
1100MHz = the same problems like on 1200 and 1300
rascal0pl said:
1200MHz - very unstable
When I was on bam kernel (gingerbread), my phone was very stable (OC 1200), no random reboots or something like that.
On this kernel - 5min and 3 reboots and a lot of FCs :/
Click to expand...
Click to collapse
For me it's quite the opposite. On Bam Kernel or Vurrut my phone use to lock up as soon as OC applied to 1.35GHZ. Now it stays without any problem.
Ha thanks for the super team of developers. Now the room is smoother than ever(until 3.0)thanks to the overclock and stuff. Plus great there is the signal fix with it.
rascal0pl said:
1200MHz - very unstable
When I was on bam kernel (gingerbread), my phone was very stable (OC 1200), no random reboots or something like that.
On this kernel - 5min and 3 reboots and a lot of FCs :/
Edit:
1100MHz = the same problems like on 1200 and 1300
Click to expand...
Click to collapse
Mine running at 1.35Ghz without any problem (the phone is a little hotter than other speed). I do a lot of gaming (most are 3D).
Is your phone stable at stock speed? I think some phones may not be able to overclock.
i want to flash your kernel,but how to back to stock dhiru kernel?
MR.Volkf said:
i want to flash your kernel,but how to back to stock dhiru kernel?
Click to expand...
Click to collapse
Reboot into recovery.. Go to backup-advance-backup boot.. So do u can restored back the previous kernel..
Sent from my GT-I9003 using Tapatalk 2
Just make a confirmation here, it work on JellyBam V.3.1.0
Here's some screenshots of the kernel.
1.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2.
3.
4.
5.
@Crackerizer : You can use this screenshot for your Kernel, Keep Developing this kernel
Sent from my Galaxy SL Powered by JellyBam V3.1.0
Rom is definitely smoother and with OC games lag way less....
But got one feedback on the camera. Image preview is very much distorted.Too many flickers.(during video recodring too)
Never had this issue in the stock kernel or loSconosciuto's signal fix kernel.
can you please look into the issue ? and can someone else confirm this ?
mdaamir1989 said:
Rom is definitely smoother and with OC games lag way less....
But got one feedback on the camera. Image preview is very much distorted.Too many flickers.(during video recodring too)
Never had this issue in the stock kernel or loSconosciuto's signal fix kernel.
can you please look into the issue ? and can someone else confirm this ?
Click to expand...
Click to collapse
This is a bug for CM10. I think it will be fixed when kernel 3.0 is ready.
Anyway, The recorded video is ok. :good:
crackerizer said:
Mine running at 1.35Ghz without any problem (the phone is a little hotter than other speed). I do a lot of gaming (most are 3D).
Is your phone stable at stock speed? I think some phones may not be able to overclock.
Click to expand...
Click to collapse
No, this kernel is unstable even on 1000MHz
and,
as I said, on gingerbread 1200MHz (BAM kernel) was very stable, without any FCs and reboots, so my phone is able to OC.
rascal0pl said:
No, this kernel is unstable even on 1000MHz
and,
as I said, on gingerbread 1200MHz (BAM kernel) was very stable, without any FCs and reboots.
Click to expand...
Click to collapse
If its unstable don't use it. U might risk the chances of burning your chip .
OC is stable for me. Works fine.
rascal0pl said:
No, this kernel is unstable even on 1000MHz
and,
as I said, on gingerbread 1200MHz (BAM kernel) was very stable, without any FCs and reboots, so my phone is able to OC.
Click to expand...
Click to collapse
It depends on the hardware you have, try a different OC or roll back.