Database Info

Enable Tethering on the new oem Froyo Rom

As the title suggests this is how you enable tethering without the verification process at&t has that checks to see if you are on the tethering plan. Beware it will suck up your data so if you don't have the unlimited data plan (most folks dont) you can run up your bill. Of course you can always just use a custom ROM.
1)get the update from samsung via kies
2)root your phone I used SuperOneClick
3)install TitaniumBackup
4)In Titanium Backup look for an application called Tethering Manager 1.0 uninstall it
Plug your phone in usb and turn on tethering. I unplugged the network cable from my PC and just plugged in my droid so I can verify that this worked for me. I did have to toggle the use packet data under the wireless networks menu off then on one time to get it to work but not on subsequent attempts. I don't have my laptop at work so I can't test the wireless hot spot feature but when you turn it on it doesn't go through the verification so I'm assuming that works also.
So for those of you that don't want a custom ROM and want tethering there you go.
(not responsible for bricked or useless phones with this process.)

chalee76 said:
As the title suggests this is how you enable tethering without the verification process at&t has that checks to see if you are on the tethering plan. Beware it will suck up your data so if you don't have the unlimited data plan (most folks dont) you can run up your bill. Of course you can always just use a custom ROM.
1)get the update from samsung via kies
2)root your phone I used SuperOneClick
3)install TitaniumBackup
4)In Titanium Backup look for an application called Tethering Manager 1.0 uninstall it
Plug your phone in usb and turn on tethering. I unplugged the network cable from my PC and just plugged in my droid so I can verify that this worked for me. I did have to toggle the use packet data under the wireless networks menu off then on one time to get it to work but not on subsequent attempts. I don't have my laptop at work so I can't test the wireless hot spot feature but when you turn it on it doesn't go through the verification so I'm assuming that works also.
So for those of you that don't want a custom ROM and want tethering there you go.
(not responsible for bricked or useless phones with this process.)
Click to expand...
Click to collapse
you can also delete tetheringmanager from the /system/apps folder using root explorer if preferred.

will this also enable Mobile AP or only USB tethering?
Sent from my SAMSUNG-SGH-I897 using XDA App

Just checked from my home laptop and yes Mobile AP also works. On the screen to turn in on or off it will say you need the feature on your account and to dial 611. But you won't need to do that as it will not enter "verifying" mode.

Since the real update was not available until today, I suspect that these tests were not done with "official" AT&T 2.2 update.
Removing the TetheringManager.apk does NOT work with the official release.

PhilipPeake said:
Since the real update was not available until today, I suspect that these tests were not done with "official" AT&T 2.2 update.
Removing the TetheringManager.apk does NOT work with the official release.
Click to expand...
Click to collapse
you sure about that? you know, cause the version we already had IS the official release...it just got to us early.

Just tried removing TetheringManager 0114.apk from /system/app and rebooting.
When I look at Settings > Tethering it still has the notice about needing a tethering account, turning on USB tethering seems to do nothing, and EasyTether still doesn't work.
(With the apk removed, Tethering 1.0 no longer shows up in TitaniumBackup)

I am using the official release that I got over kies from samsung I did it this morning. I shall send a screen shot of my phone if you really want it.

PhilipPeake said:
Just tried removing TetheringManager 0114.apk from /system/app and rebooting.
When I look at Settings > Tethering it still has the notice about needing a tethering account, turning on USB tethering seems to do nothing, and EasyTether still doesn't work.
(With the apk removed, Tethering 1.0 no longer shows up in TitaniumBackup)
Click to expand...
Click to collapse
if you are on official release, you probably need to remove .odex file too, if it exists.
but regardless, when you remove the tethering apk, you will still see the message

To test this. Make sure you have no internet connection on the pc you are connected to disconect or shut off your pc's wi-fi or unplug it from the network. Make sure debug mode is off... Plug your phone in when it gets to the screen asking what you want to do just click home. Pull up tethering turn it on wait. Pull up a browser see if you are connected. If your useing a mac I can't help you. Will try to do this on linux when I get a moment.

Hmm... Looks like there has been some additional posts since my last refresh so I'll change my post a bit.
I tested and verified this on an official rom updated using Kies mini. I used root explorer to rename the TetheringManager0114.apk file to TetheringManager0114.apk.disable. This was to keep the file around just in case it is needed later on. I rebooted the phone and I tested both Mobile AP and USB Tethering. Both worked as expected but I had to do an ipconfig /release and ipconfig /renew to get them to kick through. I had wifi disabled on my laptop (was used to test) and no ethernet cable plugged in. There is no odex file to worry about in the official release for Tethering Manager.
P.S. - As already stated above you will still get that message.

shinji257 said:
Hmm... Looks like there has been some additional posts since my last refresh so I'll change my post a bit.
I tested and verified this on an official rom updated using Kies mini. I used root explorer to rename the TetheringManager0114.apk file to TetheringManager0114.apk.disable. This was to keep the file around just in case it is needed later on. I rebooted the phone and I tested both Mobile AP and USB Tethering. Both worked as expected but I had to do an ipconfig /release and ipconfig /renew to get them to kick through. I had wifi disabled on my laptop (was used to test) and no ethernet cable plugged in. There is no odex file to worry about in the official release for Tethering Manager.
P.S. - As already stated above you will still get that message.
Click to expand...
Click to collapse
i didn't have to take any steps aside from removing the tethering apk

Ok !!! it works.
My problem was really pretty simple ... the tethering AP is on channel 6, as is my home AP.
The home AP was completely swamping the the android AP so I couldn't even see it.
Anyone know how to change the channel on the Android AP???

I completely deleted my file it never occured to me I may need it later on. Can one of you kind people post or pm with it?

chalee76 said:
I completely deleted my file it never occured to me I may need it later on. Can one of you kind people post or pm with it?
Click to expand...
Click to collapse
Which file?

TetheringManager 0114.apk

or you can use an app called pda net

what fun is it if you just go installing apps and not try to break your phone.

chalee76 said:
I completely deleted my file it never occured to me I may need it later on. Can one of you kind people post or pm with it?
Click to expand...
Click to collapse
check cog4 he has a link in the op with the apk

Here's the long and hackish way to do it if you don't want to buy some apps. It's long but relatively safe. Not responsible if you brick or do other bad things(tm) to your phone!
1. Root your phone. Nothing sinister here and easy to do with http://forum.xda-developers.com/showthread.php?t=803682
2. Install the Android Developer SDK onto your machine (good for sideloading apps) For info on installing and sideloading visit
http://ars.samsung.com/customer/usa...ID=2&PROD_SUB_ID=557&PROD_ID=558&AT_ID=303992
Yes, Samsung tells you how to get around AT&T.
3. Open a command prompt (in Windows go to your search bar and type "cmd")
4. Navigate to where adb is installed. In mine (Win 7 64 bit) this was C:\Program Files (x86)\Android\android-sdk-windows\platform-tools
Code:
cd C:\Program Files (x86)\Android\android-sdk-windows\platform-tools
If you need some help, open Windows Explorer (not IE) and search for adb.exe, then copy the path as text and paste (right click) into cmd
4b. If you've not done so before, please put your phone into USB Debugging mode
5. Open the adb shell
Code:
adb shell
6. Go up to root. Your screen will look like this
Code:
$ su
su
#
The # means you are now root. You may, on your phone's screen, need to approve this
7. Mount the system folder into read-write (this is why you need root)
Code:
mount -o remount,rw /dev/block/stl9 /system
8. Move to /system/app
Code:
cd /system/app
9. This is where the aforementioned TetheringManager0114.apk lives (boooo!) If you want to verify this (these commands are all cAsE sensitive)
Code:
ls Te*
Should dump out
Code:
ls Te*
TelephonyProvider.apk
TelephonyProvider.odex
[COLOR="Red"]TetheringManager0114.apk[/COLOR]
We want to RENAME the file
Code:
# mv TetheringManager0114.apk TetheringManager0114.apk.old
10. IMPORTANT - remount /system in read-only
Code:
mount -o remount,ro /dev/block/stl9 /system
11. Restart your phone and enjoy your tethering (but not too much, lest you run up your bill!)
Please note that this does NOT remove the AT&T notices about needing an account when you go to enable tethering.

Reverse tethering working properly!!!!!

ONlY WORKS ON WINDOWS
STEPS -
1. DOWNLOAD THE ZIP
2. ExtraCT it
3.click on “Show Android interface”.
4.The SuperUser process may ask you to allow “Usb tunnel”
5.CLick connect
6.Run your browser!!!!
TNXX to capslock666
http://forum.xda-developers.com/attachment.php?attachmentid=820705&d=1324196162
dont forget to press thanks!!

Good Job Man !!!!!
Sent from my GT-S5670 using XDA App

christo31 said:
ONlY WORKS ON WINDOWS
STEPS -
1. DOWNLOAD THE ZIP
2. ExtraCT it
3.click on “Show Android interface”.
4.The SuperUser process may ask you to allow “Usb tunnel”
5.CLick connect
6.Run your browser!!!!
TNXX to capslock666
http://forum.xda-developers.com/attachment.php?attachmentid=801304&d=1322750170
Click to expand...
Click to collapse
It might run on linux too use Wine
Good job!

Awesome work buddy!!!
had been searching for this since ages...!!!
(though the speed feels like an issue, but nevermind!!!)

Im not getting the reverse tethering on my fit..My pc shows status as not connected and my phone shows connected and service is running . Im on service pack 3 ...What should i do ?

not working
ashish9277 said:
Im not getting the reverse tethering on my fit..My pc shows status as not connected and my phone shows connected and service is running . Im on service pack 3 ...What should i do ?
Click to expand...
Click to collapse
yeah not working with me too... on cm7.1 and windows 7 pc...
---------- Post added at 09:05 PM ---------- Previous post was at 08:57 PM ----------
christo31 said:
ONlY WORKS ON WINDOWS
STEPS -
1. DOWNLOAD THE ZIP
2. ExtraCT it
3.click on “Show Android interface”.
4.The SuperUser process may ask you to allow “Usb tunnel”
5.CLick connect
6.Run your browser!!!!
TNXX to capslock666
http://forum.xda-developers.com/attachment.php?attachmentid=801304&d=1322750170
Click to expand...
Click to collapse
not working on cm7.1 and windows 7 pc

hey if its not working then
check whether usb debugging is enabled or not

My usb debugging is enabled and phone is rooted. Im using Crystal blue theme made by Rishee on KQ5 and using windows xp. What can be the cause of the problem ?

did u click the show android interface icon
click it
and then look at your phone some usb tunnel may come in the notification bar

awesome man!!! finally its working in cm7 OC!!! ........ but you cant download stuffs from market using this !!!

Nice, pal
Finally working

Urgent
the download link provided says its an invalid attachment....

invalid attachment
Sent from my GT-S5570 using xda premium

christo31 said:
ONlY WORKS ON WINDOWS
STEPS -
1. DOWNLOAD THE ZIP
2. ExtraCT it
3.click on “Show Android interface”.
4.The SuperUser process may ask you to allow “Usb tunnel”
5.CLick connect
6.Run your browser!!!!
TNXX to capslock666
DONT FORGET TO PRESS THANKS!!!!
Click to expand...
Click to collapse

christo31 said:
only works on windows
steps -
1. Download the zip
2. Extract it
3.click on “show android interface”.
4.the superuser process may ask you to allow “usb tunnel”
5.click connect
6.run your browser!!!!
Tnxx to capslock666
http://forum.xda-developers.com/attachment.php?attachmentid=820705&d=1324196162
Click to expand...
Click to collapse
dont forget to press thanks!!!:d:d:d:d:d:d:d:d:d:d:d

Formal
Good work... workin like a charm.. but y isnt market workin.... :O

wilfredcool007 said:
Good work... workin like a charm.. but y isnt market workin.... :O
Click to expand...
Click to collapse
really !!!!! i guess market should have had worked the only thing thats not workin is market donwloads

christo31 said:
really !!!!! i guess market should have had worked the only thing thats not workin is market donwloads
Click to expand...
Click to collapse
only the browser is workin but the apps like FB viber etc asks for internet package
i hav no idea y is it like that

For me, on my devices it does say connected thoughit says that it is waiting fo the lient, though on my pc... every port says not connected... and i can't brose the internet...

universal browsing
If the Internet is not connecting already -even after enabling the USB de-bugging-
make sure that you have installed the "naked adb driver" -just -Google it-
And to make this connection universal ie: works on all of your apps not just the browsers
go to settings>> Mobile Networks>>> APNs or Access Point Names>>> add a new one and give it any name
now this is the important thing to do : in the PROXY type 127.0.0.1 and in PORT type: 8080
and make this access point your default
Enjoy

[ Solved ] Working 100% - Enable WiFi ad-Hoc Network for both ICS / GB -htc Sensation

[ Solved ] Working 100% - Enable WiFi ad-Hoc Networking for Both ICS and GB for htc Sensation
For GB , this Patch will enable ad-hoc 100% steady connection for both ( WEP and open Networks ) , Also Hotspot WPA2-PSK is still able to connect
For ICS , the APK will enable ad-hoc 100% steady connection with Full WiFi Signal for both ( WEP and open Networks ) , and for Hotspot WPA2-PSK use through regular wifi menu
General
Android does not show this Ad-hoc networks ( it Finds them in the search , but filters them out of the shown results ) , this patch prevent that filtering and shows those ad-hoc networks
There are two types of WiFi Networks :
Infrastructure ( Hotspot ) WPA,WPA2-PSK which is the most secured connection , usually routers broadcast this
Ad-hoc it is either WEP or open network which is less security , usually issued through a laptop connected to a DSL line to broadcast a temporary WiFi connection
DISCLAIMER
I am not responsible if flashing this Mod results in bricking your phone
for Rooted devices​
ad-Hoc Networking for GB
Download Link
See attached Patch Ad-hoc Sensation-Ad-hoc.zip ( Full Credit and thanks to leeDroid )
ZT-180 Adhoc Switcher APK can also work with GB , But i prefer the permanent solution of the above Patch for GB
Apply the Patch
it is always good to do a Backup for your data , Or Just Backup the original file " wpa_supplicant " located in System\bin .
to restore the original file " wpa_supplicant " any time :
just open the Patch in a winrar window and navigate to System\bin and over-right the one in the Patch with the original ( you can get the original from your Rom zip ) . apply the modified Patch from recovery and you are back to the original
if you use Root Explorer to restore the original file ,make sure to set the correct permissions and ownership values
Clear Dalvik cache , and install the Patch from recovery as usual
ad-Hoc Networking for ICS
it is always good to do a NAND Backup for your Rom and data
there is an APK named " ZT-180 Adhoc Switcher " which i geuss is not intended for Sensation but can support additional devices in the try Mode , this APK has two modes
infrastructure mode infrastructure mode.jpg ( will not be used , for Hotspot WPA2-PSK use regular wifi menu )
and " Just to try " ad-hoc mode for non supported devices Just to try ad-hoc mode.jpg that we interested in
the " Just to try " ad-hoc mode worked fine with Sensation
it connects fast , very steady connection with full Wifi Signal and a fast WiFi Data transfer , Ad-hoc it is working for both WEP or open network , Please note that some firewalls could prevent you from connecting even after adjusting its settings
Ad-hoc ( open Network ) :
open network connection doesn't require a Password ,
to modify either SSID name or WEP password , go to setting while you are in infrastructure mode and modify or clear the name in SSID then just switch back to Just to try mode and enable WiFi
if you clear ( remove ) the default name in SSID , this lets the device find and connect automatically to any open ad-hoc you establish from your laptop for example with any name of your choice ( on condition that your ad-hoc connection should be the only available ad-hoc connection in range ) ,
if you leave the default name in SSID "Android tether " as it is , it will only look for a connection with the name "Android tether " that is issued from your laptop and it will not detect any ad-hoc connection with any other name
if there is more than one open network in range that can be seen by the APK then
tip 1 : name the connction in your laptop same as in device SSID ( i.e android tether )
this is because if there is more than one open ad-hoc network and you left the SSID name empty , you can not control which connection the APK will choose to connect to
tip 2 : or use Ad-hoc ( WEP Network )
Ad-hoc ( WEP Network ) :
if you want to use WEP connection , go to setting while you are in infrastructure mode then enter SSID name and Password then switch back to Just to try and enable wifi WEP Password.jpg
the name of the connection should be the same name of the connection you started on your laptop for example
there is a complete help for the APK when you press the thin line under setting
Superuser.APK
if you are using the normal Super user APK opens normal , But if you are using the New SuperSU APK there will be a delay of maybe 5 sec for starting or executing Commands
please read this first #70 , Please note that this APK is not fully compatible with sensation although it worked fine with me
there is another APK ( try it if you like to ) named " WiFi AD HOC enabler " which doesn't really work good ( very weak signal and disconnects frequently ) , or at least this is what i experienced
Connectify Pro
there is a small yet powerful PC Software Called Connectify Pro ( i can't do without it ) that does three things :
it is for windows users
Acts like an actual hardware Router ( Not software networking )
toggle wifi with a single click for either ad-hoc or hotspot ( can start the same ad-hoc connection after reboot )
automatically does all complicated configurations for all types of network to fit with your firewall and windows , also share and transfer files among other options
Press the thanks Button for this Post

There is an application similar to connectify, hostapd for ubuntu which I use all the time . But both the application ( connectify and hostapd is hardware depended . If your wifi Card supports infrastructure mode or master mode , then only they will work. ) So this work around will help those users.
Thanks for your post dear..

Nit worked to me with ICS ,

It works!!!
I'm using HyperNonSense-v2.4
Thank you!!!

Is wifi hotspot bit working for some? I'm confused.
Sent from my HTC Sensation using Tapatalk

Please delete... googling got me

blackchad said:
i literally cannot figure this out... the instructions are really vague. "install the patch as usual from recovery" what is usual? you dont say. i backed up the wpa file and just used root explorer to overwrite it and it instantly broke my wifi. i restored the original so it came back fine but i dont know how to install patch from recovery as usual. obviously the APK says i dont have all of the files and must close. please help. running ICS viperrom 1.01
Click to expand...
Click to collapse
It means boot into recovery and flash it as you would a Rom
Sent from my HTC Sensation 4G using xda app-developers app

i feel very retarded... thank you very much

blackchad said:
i feel very retarded... thank you very much
Click to expand...
Click to collapse
No problem, mate.
Sent from my HTC Sensation 4G using xda app-developers app

ok, after reading the post for the 10th time i guess im not supposed to apply the patch since im on ICS? well, i restored completely to before i tried to get adhoc working and just installed the APK and it still didnt work. said i didnt have all the files and it must close. the link to the APK in the play store doesnt work because sensation isnt supported and i just had to find it online. Could it maybe be the APK that im using? Does anyone have a working one they could send to me or any ideas to a solution?

It's not work with the latest Sense 4 build (HTC Ville C2 latest RUU (1.11.401.110) Android 4.0.3 ICS). So can you tell me how did you do with the wpa_supplicant file please? I want to modify it myself.

is it only working for HTC OR any GB ROM ?
Thanks

what are the specific steps in applying the patch?
whats needed? and steps?
thanks

Is it just depends on replacing wpa_supplicant file, or something more?
Because author of this apk said that file is vary for various devices, and I'd like to request for Onda V972 V1.
Apk doesn't work.
Can I just replace it without recovery, or is a stock recovery does the same in case of not having other one?
edit.
Here is how to compile proper wpa_supplicant file for your Android version:
http://forum.xda-developers.com/showpost.php?p=50717707&postcount=14
and how to paste it without recovery in root explorer/total commander:
http://forum.xda-developers.com/showpost.php?p=20334424&postcount=292

●●[ROOTED][GUIDE]Wifi Reverse teTher-Windows and Ubuntu-Ad hoc Networks●●

●●[ROOTED][GUIDE]Wifi Reverse teTher-Windows and Ubuntu-Ad hoc Networks●●
This guide teaches you to reverse tether your Android phone via WiFi. That is, it allows you to use your Ethernet connection of PC on your Android phone. It is useful for those who do not have WiFi routers and data connection. So if you have unlimited data plan for your computer, why not share the connection with your phone?
I am not the developer of the files supplied
Requirements:-
1.Rooted Phone
2.Wifi enabled Laptop or PC
3.Root explorer or any other application which gives system access
4.File in the attachement
Procedure :-
Phone:
Download Wpa_supplicant.zip and extract "wpa_supplicant" from it, save it on your SD card.
Open Root Explorer, and grant it superuser access when asked for.
Navigate to system -> bin and long press on wpa_supplicant; Select copy, and paste the file into any folder on your SD card.
Now navigate to the file you downloaded, copy it in same way, and paste it back to system -> bin. Note, you might need to mount the system as R/W instead of R/O by pressing a button on the top just before pasting the file.
Reboot.
▬▬Ubuntu (Must work for other Linux Distros too)▬▬:
Open Network Connections
Goto Wireless tab, select add, and set the following:
SSID: <Any_name_you_like>
Mode: Ad hoc
Leave other things unchanged, and go to Ipv4 settings tab
Set method to Shared to other computers
Go to Wireless security tab and set Security to WEP 40/128 bit key and set key to a numeric password (or hexadecimal one).
Check the connect automatically box on top of the tabs and press Save.
Your Android phone must now detect this network, and you can establish the connection by using your security key.
▬▬Windows XP, Vista, 7▬▬
Download and Install Connectify from www . connectify.me/download-lite/
Start Connectify Hotspot by giving a name and password to your hotspot and selecting the Ethernet connection to share. Make sure the security type is WEP or Open.
Disable your firewall (Simply adding it to exceptions doesn't work for AVG at least)
Now your phone should be able to see the hotspot and establish the connection using the password set.
Known Issues :
1.Random disconnections (Very less frequency)
2.Disconnections due to screen lock / sleep on laptop
3.For me Security mode does not works
HIT THANKS IF IT WORKED
ENJOY

Hope it works....

Do you know how to enable wifi on pc?...
coz i have cable modem only on desktop and only that one has unlimited packs...so

onceupondev said:
Do you know how to enable wifi on pc?...
coz i have cable modem only on desktop and only that one has unlimited packs...so
Click to expand...
Click to collapse
PC is wifi enabled ??

amn_grg said:
Hope it works....
Click to expand...
Click to collapse
it will surely work

avilove4u said:
PC is wifi enabled ??
Click to expand...
Click to collapse
I dont know...seriously...
Tell me in detail please...

Well wat does dat file do in specific??coz der's no prob 4r me conectng using connectify..
and hey u can share pc or laptops net through ad hoc ntwrk i thnk u knw dat

MajinSaiyan4 said:
Well wat does dat file do in specific??coz der's no prob 4r me conectng using connectify..
and hey u can share pc or laptops net through ad hoc ntwrk i thnk u knw dat
Click to expand...
Click to collapse
Yeah but connectify allows more option like file sharing etc .
That file enables reverse tethering via wifi

onceupondev said:
I dont know...seriously...
Tell me in detail please...
Click to expand...
Click to collapse
Ur PC is wifi enabled or not ??

avilove4u said:
Ur PC is wifi enabled or not ??
Click to expand...
Click to collapse
How to know that?

onceupondev said:
How to know that?
Click to expand...
Click to collapse
check ur PC's spec
or
If you still haven't found anything to indicate that your computer is Wi-Fi enabled, right-click on "Computer" again, select "Manage" and "Device Manager." Then click on the "Hardware" tab. Read the list below "Network Adapters." Note that any adapter labeled "Ethernet" or "10/100" has nothing to do with wireless compatibility. However, any adapter labeled "wireless" or "802.11" indicates compatibility.

onceupondev said:
How to know that?
Click to expand...
Click to collapse
http://www.ehow.com/how_2171696_check-computer-wifi-enabled.html
hope that helps.

[Guide] *Reverse Tether* (Wifi method)(Download anything) [Windows and Ubuntu Users]

This guide teaches you to reverse tether your Android phone via WiFi. That is, it allows you to use your Ethernet connection of PC on your Android phone. It is useful for those who do not have WiFi routers and data connection. So if you have unlimited data plan for your computer, why not share the connection with your phone?
I am not the developer of the files supplied
Requirements:-
1.Rooted Phone
2.Wifi enabled Laptop or PC
3.Root explorer or any other application which gives system access
4.File in the attachement
Procedure :-
Phone:
Download Wpa_supplicant.zip and extract "wpa_supplicant" from it, save it on your SD card.
Open Root Explorer, and grant it superuser access when asked for.
Navigate to system -> bin and long press on wpa_supplicant; Select copy, and paste the file into any folder on your SD card.
Now navigate to the file you downloaded, copy it in same way, and paste it back to system -> bin. Note, you might need to mount the system as R/W instead of R/O by pressing a button on the top just before pasting the file.
Reboot.
▬▬Ubuntu (Must work for other Linux Distros too)▬▬:
Open Network Connections
Goto Wireless tab, select add, and set the following:
SSID:
Mode: Ad hoc
Leave other things unchanged, and go to Ipv4 settings tab
Set method to Shared to other computers
Go to Wireless security tab and set Security to WEP 40/128 bit key and set key to a numeric password (or hexadecimal one).
Check the connect automatically box on top of the tabs and press Save.
Your Android phone must now detect this network, and you can establish the connection by using your security key.
▬▬Windows XP, Vista, 7▬▬
Download and Install Connectify from www . connectify.me/download-lite/
Start Connectify Hotspot by giving a name and password to your hotspot and selecting the Ethernet connection to share. Make sure the security type is WEP or Open.
Disable your firewall (Simply adding it to exceptions doesn't work for AVG at least)
Now your phone should be able to see the hotspot and establish the connection using the password set.
Known Issues :
1.Random disconnections (Very less frequency)
2.Disconnections due to screen lock / sleep on laptop
3.For me Security mode does not works
HIT THANKS IF IT WORKED
ENJOY
Download the file here :-
http://db.tt/FdAVwebJ
If someone want mirror then post
Using this method you can download everything
From apps on Play Store to Media hosting websites link
Post your Review

Reserved for future use

Does this work on ICS...Do you use CM9? what device do you have?

milan188 said:
Does this work on ICS...Do you use CM9? what device do you have?
Click to expand...
Click to collapse
May i know which device you are using? ?
And just try to replace the file