Thanks to 21productionz, and his re-mapping of the Genius button on the MT4G, I was able to re-map the keys on the MT4G Slide as well.
Pls read through before attempting.
What you need:
An S-OFF and perm rooted MT4G Slide. (so re-map sticks)
A file explorer capable of read/writing root directories/files. (Root Explorer is my personal fav)
The expectation that this is a guide to re-mapping keys, so don't mess up.
Steps to take:
1. Using Root Explorer, go to /system/usr/keylayout
2. Make sure Root Explorer is mounted as R/W.
(top right button should display Mount R/O, bc you are currently in R/W mode)
3. Long press 'doubleshot-keypad.kl'
4. Select 'Open in Text Editor'
5. Line 5 shows 'key 188' with FUNC_4 next to it. Replace FUNC_4 with 'SEARCH' - all caps.
This re-maps the Genius button on the front of the phone.
6. Scroll down a little and you will see # column 3. 'Key 184' needs to be changed from FUNC_4 to "SEARCH" as well.
This re-maps the Genius button on the qwerty keyboard. (now you can actually use quick launch)
7. Hit the hard menu key and select Save Changes or Save and Exit.
8. Root Explorer will automatically create a backup of the original file you edited with the original file name ending with the extension .bak
(doubleshot-keypad.kl.bak)
9. Need to restart before it takes effect.
Pls be sure you have re-mapped the correct keys and entered 'SEARCH' correctly, or your buttons could fail, resulting in a paperweight - with a keyboard.
Also, I did this without editing 'doubleshot-keypad-v0.kl.'
You can also reverse the re-map by replacing 'SEARCH' back to FUNC_4.
__________________________________________________________________________________
Some users have changed the qwerty home, menu, back, and genius buttons to DPAD values, in other words, up down left right..
-to do so, see this thread here
Some other useful info and re-maps.
FUNC_1 = inputs ".com"
using alt while pressing the key you remapped to FUNC_1 results in ".www"
FUNC_2 = is equivalent to pressing the SYM key next to ALT-Right.
FUNC_4 = Genius Button App
To create a 'tab' button in place of www.com
Same file to edit. under # column 0
---- key 150 should say = FUNC_1
make key 150 = "TAB" (all caps, no quotes, make sure spacing stays even)
restart.
Thank you!im come from china .my device is S-OFF.but not have perm rooted. how to get perm rooted. can you tell me?
masker2011 said:
Thank you!im come from china .my device is S-OFF.but not have perm rooted. how to get perm rooted. can you tell me?
Click to expand...
Click to collapse
you will want to check this thread here in development section.
Can you use this to map multiple actions per button. Say, short press for search, long press for Genius button?
Appreciate the credit.
Sent from my HTC Vision using XDA Premium App
OmsagroSylph said:
Can you use this to map multiple actions per button. Say, short press for search, long press for Genius button?
Click to expand...
Click to collapse
From the source thread (21productionz) there was a fix/app called "button shortcut" in the market that would allow you to change certain long press button mapping.. (camera, search button) and this would allow you to choose Genius Button App as the long press search function.
However, I haven't personally looked for it in the market for the Slide..
------------------------------------------------------------------------
This was provided by Mftek, and if it helped you, you can click here to thank him.
21productionz said:
Appreciate the credit.
Sent from my HTC Vision using XDA Premium App
Click to expand...
Click to collapse
No problem. Appreciate the original find!
nyolsson said:
From the source thread (21productionz) there was a fix/app called "button shortcut" in the market that would allow you to change certain long press button mapping.. (camera, search button) and this would allow you to choose Genius Button App as the long press search function.
However, I haven't personally looked for it in the market for the Slide..
------------------------------------------------------------------------
This was provided by Mftek, and if it helped you, you can click here to thank him.
Click to expand...
Click to collapse
I'll look into it. I was just wondering if you had information on how the commands would look if editing that config file without an app.
Sent from my myTouch_4G_Slide using XDA App
Thank you ! This works perfectly fine.
hi there,
can anyone recommend a tool, i saw that root explorer is paid app, is there any free tools?
thanks
You could push an already edited file using ADB... let me know if you need one, I'll upload it.
overhauling said:
You could push an already edited file using ADB... let me know if you need one, I'll upload it.
Click to expand...
Click to collapse
thx for help,
could you tell me instruction for the ADB, i did it long time ago when i change my boot screen on G1.
TIA
pao_revolt said:
thx for help,
could you tell me instruction for the ADB, i did it long time ago when i change my boot screen on G1.
TIA
Click to expand...
Click to collapse
Well, I got a better method. This is a Free Root explorer alternative that you could use: https://market.android.com/details?id=xcxin.filexpert&hl=en
EDIT: Make sure you enable "Root Explorer" under settings.
rooted, perm s-off, now no more genious button.....
overhauling said:
Well, I got a better method. This is a Free Root explorer alternative that you could use: https://market.android.com/details?id=xcxin.filexpert&hl=en
EDIT: Make sure you enable "Root Explorer" under settings.
Click to expand...
Click to collapse
Been using this, its great. I particularly like the built in ftp/web server for multiple file exchange.
thanks a lot bro
You bet. Does anyone know what all the FUNC_? are?
FUNC_1
FUNC_2
FUNC_3
FUNC_4 - Genius Button
FUNC_5
FUNC_6
FUNC_7
OmsagroSylph said:
You bet. Does anyone know what all the FUNC_? are?
FUNC_1
FUNC_2
FUNC_3
FUNC_4 - Genius Button
FUNC_5
FUNC_6
FUNC_7
Click to expand...
Click to collapse
ok here is a very noob question,
1. i download that app, also
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
from market
2. i open the file explorer gave it root permission. then i go to the /system/usr/keylayout
3. open the doubleshot-keypad.kl with text edit
4. i edit as OP suggested and tried to save it can't so what i did is save to SD card (also reopen the file to confirm that it is changed from FUNC4 to SEARCH)
5. i copy and paste file from SD card to the /system/usr/keylayout, it asked me if i want to overwrite the file, i answer yes
6. i tried to check if it overwrite but it is not
what i did wrong?
thanks
edit, okay i did try in setting of file explorer i mount it with read/write, and follow the same step now i cannot use the genius button at all the rest of button still working...? and yes i replace it with SEARCH
pao_revolt said:
ok here is a very noob question,
1. i download that app, also
from market
2. i open the file explorer gave it root permission. then i go to the /system/usr/keylayout
3. open the doubleshot-keypad.kl with text edit
4. i edit as OP suggested and tried to save it can't so what i did is save to SD card (also reopen the file to confirm that it is changed from FUNC4 to SEARCH)
5. i copy and paste file from SD card to the /system/usr/keylayout, it asked me if i want to overwrite the file, i answer yes
6. i tried to check if it overwrite but it is not
what i did wrong?
thanks
edit, okay i did try in setting of file explorer i mount it with read/write, and follow the same step now i cannot use the genius button at all the rest of button still working...? and yes i replace it with SEARCH
Click to expand...
Click to collapse
I assume you are using File Expert and that you have root explorer enabled.
In the keylayout directory, did you open the menu, go to More Options >> Mount >> Mount as Read Write?
One thing that could also help you if you are having issues writing to or overwriting the file is to long press and choose File Operations >> Permission, and Enable read/write/exec permissions.
OmsagroSylph said:
I assume you are using File Expert and that you have root explorer enabled.
In the keylayout directory, did you open the menu, go to More Options >> Mount >> Mount as Read Write?
One thing that could also help you if you are having issues writing to or overwriting the file is to long press and choose File Operations >> Permission, and Enable read/write/exec permissions.
Click to expand...
Click to collapse
yes i did, i think i might messed up the kl file if you can please upload the edited kl file for me so i can try copy and paste
thanks
Related
http://forum.xda-developers.com/showpost.php?p=6763690&postcount=1246
This is a remake of the original post by Koush. Much thanks to him and everyone for the work on root'ing. The original post has not been updated in recent days so I started a new thread with new instructions.
OLD METHOD
G1 RC*/CRC*/DRC* (phone is OFF)
ON YOUR PC
1. Download the DREAIMG-RC*.zip
US-DREA100 http://android.lucidrem.us/_fd.php?file=files/howto-root/DREAIMG-RC29.zip
EU-DREA110 http://android.lucidrem.us/_fd.php?file=files/howto-root/DREAIMG-RC7.zip 2. Extract DREAIMG.nbh to SD FAT32
3. Download the recover_testkeys.img
http://android.lucidrem.us/_fd.php?file=files/howto-root/recovery_testkeys.img 4. Copy recovery_testkeys.img to SD FAT32
5. Download the TheOfficial TMO_OTA_DRC83/92
US http://android.lucidrem.us/_fd.php?file=files/enomther/USA/DRC83/update.zip
EU http://android.lucidrem.us/_fd.php?file=files/enomther/EUR/DRC92/update.zip 6. Copy update.zip to SD FAT32
ON YOUR G1
1. Put SD in the G1 - Hold CAMERA + POWER
2. Press POWER to INSTALL
3. When COMPLETE Click TRACKBALL
4. Hold GREEN + MENU + RED -> REBOOT
5. GoTo Home -> Apps -> Market -> Telnet -> INSTALL
6. GoTo Home -> Type [enter]telnetd[enter]
7. GoTo Home -> Apps -> Telnet -> Connect
8. Type id[enter] -> "uid=0(root) gid=0(root)"
9. Type mount -o rw,remount /dev/block/mtdblock3 /system[enter]
10. Type dd if=/system/bin/sh of=/system/bin/su[enter]
11. Type chmod 4755 /system/bin/su
12. GoTo Home -> Apps -> Market -> Terminal Emulator -> INSTALL -> RUN
13. Type su[enter] -> #
14. Type cat /sdcard/recovery_testkeys.img > /system/recovery.img[enter]
15. Type flash_image recovery /system/recovery.img[enter]
16. Press POWER -> OFF
17. Hold HOME + POWER -> Hold ALT + S -> INSTALL
18. Hold HOME + BACK -> REBOOT
You can download the text file here:
http://android.lucidrem.us/files/howto-root.txt
NEW METHOD - (does not work on v1.6/DRC*) - Wow. I am reposting this info from another source:
This is an automatic root process. Load a new recovery image and load a ROM with some simple clicks.
1. Download these to the SD:
http://android.lucidrem.us/_fd.php?file=files/howto-root/flashrec-20090904.apk
http://android.lucidrem.us/_fd.php?file=files/howto-root/recovery-RA-dream-v1.4.0.img
USA http://android.lucidrem.us/_fd.php?file=files/enomther/USA/DRC83/update.zip
EUR http://android.lucidrem.us/_fd.php?file=files/enomther/EUR/DRC92/update.zip 2. Use ASTRO to install the APK file. -> Run the program.
3. Click to BackUp your current recovery.
4. Type "/sdcard/recovery-RA-dream-v1.4.0.img" into the text box. -> Click "Flash Custom Recovery Image" (unless you want Cyan)
5. Boot into the recovery screen and flash the new update.zip file.
You now have root access and you did not have to wipe.
Now you will be able to reboot into the recovery screen and flash any ROM.
Try it. You'll like it. Works on G1 and myTouch.
GET ASTRO HERE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sources:
http://theunlockr.com/2009/08/22/how-to-root-the-mytouch-3g-or-g1-in-one-click/
http://forum.xda-developers.com/showthread.php?t=553537
Creator - Zinx Verituse:
http://zenthought.org/content/project/flashrec
http://code.google.com/p/flashrec/
...but is it -too- simple?
Nice job
5. Download the TMO_OTA_CRC1
US http://android.lucidrem.us/_fd.php?f...RC1/update.zip
EUR http://android.lucidrem.us/_fd.php?f...RC1/update.zip
ERROR: download file NOT SPECIFIED. USE _fd.php?file=filepath
these links don't work for me. Are there any mirrors for these?
Fixed Hyperlink
fragske said:
5. Download the TMO_OTA_CRC1
US http://android.lucidrem.us/_fd.php?f...RC1/update.zip
EUR http://android.lucidrem.us/_fd.php?f...RC1/update.zip
ERROR: download file NOT SPECIFIED. USE _fd.php?file=filepath
these links don't work for me. Are there any mirrors for these?
Click to expand...
Click to collapse
my apologies .. i mistyped the link .. fixed now
Touch Screen Root Process
Wow. I am reposting this info from another source:
This is an automatic root process. Load a new recovery image and load a ROM with some simple clicks.
http://android.lucidrem.us/_fd.php?file=files/howto-root/recovery-rav1.2.1g.img
http://android.lucidrem.us/_fd.php?file=files/howto-root/flashrec-20090815.apk
Download these two files to the phone. Install the APK with ASTRO. Flash the custom image by typing it into the text box. Done. Now you will be able to reboot into the recovery screen and flash any ROM. Try it. You'll like it. Works on G1 and myTouch.
Sources:
http://theunlockr.com/2009/08/22/how-to-root-the-mytouch-3g-or-g1-in-one-click/
http://forum.xda-developers.com/showthread.php?t=553537
How do I know if I have root?
I tried the new method, and everything seemed to go through without glitches. Is there any way I can verify that I have gained root access?
Thanks.
sevakm said:
I tried the new method, and everything seemed to go through without glitches. Is there any way I can verify that I have gained root access?
Thanks.
Click to expand...
Click to collapse
Type su in Terminal Emulator. If you get a # then you have root. Anything else then no.
LucidREM, fantastic work. I think people need this tut because they have a hard time reading the originals. And my thoughts the gods should be pleased
It wouldnt let me install the flash recovery apk. I followed the directions to the letter.
ThR1LL said:
Type su in Terminal Emulator. If you get a # then you have root. Anything else then no.
Click to expand...
Click to collapse
Thanks. It works!
Also thanks a lot to LucidREM for posting this. I kept trying to do it the old way, but without any success.
ASTRO
jacknmary said:
It wouldnt let me install the flash recovery apk. I followed the directions to the letter.
Click to expand...
Click to collapse
what was the response when it was installing? how did you attempt the install?
Can I use...
Cyanogen's 1.4 img instead...
Or at the very least... reflash to cyanogen's 1.4 img after I follow the "new" method in the first post?
Thanks,
Adam
Recovery Image
djfreaq said:
Cyanogen's 1.4 img instead...
Or at the very least... reflash to cyanogen's 1.4 img after I follow the "new" method in the first post?
Thanks,
Adam
Click to expand...
Click to collapse
absolutely .. the cyan 1.4 is actually the default recovery in the APK that you download .. however .. it is not 100% compatible with all phones .. the newer recovery image from RA is good for G1 and myTouch as well .. the recovery is actually very nice and you should still be able to use cyan's ROM with a different recovery image
LucidREM said:
absolutely .. the cyan 1.4 is actually the default recovery in the APK that you download .. however .. it is not 100% compatible with all phones .. the newer recovery image from RA is good for G1 and myTouch as well .. the recovery is actually very nice and you should still be able to use cyan's ROM with a different recovery image
Click to expand...
Click to collapse
Fantastic. Music to my ears.
I've been a little more cautious recently, since my late G1 met it's demise... I somehow managed to fry the boot-loader. It's actually hilarious reading other posts on here because some people are so adamant about how it's impossible to brick the G1... well trust me. I did.
Anyway, thanks Lucid, I'll be trying your little method when my phone arrives Friday.
OH and just to double check. No need to revert to RC29 to make this work? I can have any factory-tmobile-out-of-the-box ROM on my phone and the NEW method will do the trick?
Again,
Thanks
Still not working.
Build Number:
1.56.73.2 PLAT-1.0_gms-135348 CL#11526 release-keys, so it's none of those two versions , and as I said before, not even the boot screen isn't the same ( Camera button+power)
Hope this helps, and i get a solution to my problem :-<
Found the topic that's dedicated to this version of the dream thanks anyway.
jacknmary said:
It wouldnt let me install the flash recovery apk. I followed the directions to the letter.
Click to expand...
Click to collapse
Go to Setting -> Applications -> allow unknown sources
This is sort of a given considering you're installing an apk from an untrusted source (ie, not the Market).
Woks For Me!!!
Worked flawlessly... Now to find a Rom... Thanks A Lot!!!
Noob question...my G1 is already rooted, I want to install the cyanogenMod...how do I do that?
obliquefx said:
Noob question...my G1 is already rooted, I want to install the cyanogenMod...how do I do that?
Click to expand...
Click to collapse
if you have root you can just flash cyan's file to the phone .. boot into the recovery screen and ALT+S
Do you think you could make a guide on how to flash hero using the one click root method.
First things first...
Credits:
Mast3rpyr0 - Original creator of a simple one click root. Most the code used here is based on his work with some tweeks. [ Link ]
webs05 - For the outstanding help he has provided to those who were having issues using Simple Root!!! Thanks!
toastcfh - For root and nand unlock. [ Link ]
Koush - Recovery image [ Link ]
maejrep - For helping with the code to remove sendkeys!! Thanks alot!!
If I forgot anyone that I should have mention, let me know....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Automatic updates and create update patches with wyBuild.
After hours of trying to figure out a way to make Mast3rpyr0's batch files work correctly, I noticed it had problems sending certain commands. So I decided to use some of his batch file codes, and create a VB.NET application along with batch files. I have unrooted and rooted my personal phone multiple times trying to get this to work. I tested the app 3times!! Each time Unrooting my phone! All three times its has been successful!
What exactly does this do?
Exactly what it say, Root your EVO in 3 Steps.
How do you use it?
Make sure your phone is on USB Debug mode. (MENU > Settings > Applications > Developement > USB debugging = Checked ) Click the buttons starting from Step 1.
Why the large file size?
This includes all the .img and .zip files that are needed to root. (2 PC36IMG.zip @ ~ 170MB = 340mb) and a couple of other smaller files. I decided to add them to make things more simple and avoid having to explain where to get these files.
Youtube Example
sorry for all the video splits...not my fault, blame youtube.
Video quality might be bad, give them a few to process 720p version
Part 1-1 - http://www.youtube.com/watch?v=GAqTEAWxh7U
Part 1-2 - http://www.youtube.com/watch?v=578jDEJ6M_c
Part 2-1 - http://www.youtube.com/watch?v=I-FbYqPOrpg
Part 2-2+3 - http://www.youtube.com/watch?v=qk7lBDpSp-A
AndroidPolice.com Review + Tips
Download:
Megaupload - had to put this up, account suspended due to the amount of downloads =( they want my to go dedicated smh...
Official Page | Full (Download this if you never used this program before)
If you have downloaded this program before, please read this
Note: Its recommended to flash a custom ROM. Reason I say this is because for whatever reason, the eng-image doesnt allow proper SU permission!!
Requires: Dot Net Framework 4 and HTC SYNC
I would try it if I didn't fully root yesterday. But props to you guys for putting that together. Seems like a one step jailbreak. Very nice.
WOW! Great work. This will unlock NAND too? If so you might want to update your thread title....
jiqqaman said:
First things first...
FOLLOW THE DIRECTIONS!! IF IT SAYS DONT MOVE YOUR MOUSE, DONT CLICK ANYTHING, DONT TOUCH YOUR KEYBOARD... THEN DONT!!!!
The reason for this is because for some reason a batch file cant send the command
Code:
adb shell cat sdcard/flash_image > /data/flash_image
The only way I found to get around that was using Sendkeys. I know, send keys is lame, and poor programming, but its the only way that I could get this to work.
Basically, Sendkeys sends keystokes to a targeted window, as if you were typing. You might see your keyboard NumLock, Caps light blink while this is being used, which is perfectly normal. (Enjoy the light show)
Click to expand...
Click to collapse
That's because the windows shell interpreter parses the redirect as belonging to the Windows system, not the android system. So it's trying to redirect the output to c:/data/flash_image or some such nonsense. Since Windows doesn't do / for it's directory structure, but instead uses \ it gacks trying to find the directory to put it in (which would be wrong even if it worked, since it would be on your hard drive, not the phone). You can change the cat line to this:
Code:
adb shell cp /sdcard/flash_image /data/flash_image
and it should work just as well. Anytime you use a redirect in a batch script like that it's going to try and redirect to Windows. If it wasn't my day off and I wasn't so tired I might figure out a fix for that, but the code I posted above should do the trick well enough. I wasn't sure initially why people wanted to to read the file into another one in the first place, but I did it with cp when I rooted and it worked fine. I suggest testing it, and then possibly changing your program. That way you can get rid of sendkeys and people breaking root by clicking something when it's running
this is amazing. too bad noobs like myself could not wait to root and unlock nand. but the process was well worth it. great job, i hope this save someone a headache
Re: [Program] SimpleRoot .1 ---- 3 Click Root!!
smw6180 said:
That's because the windows shell interpreter parses the redirect as belonging to the Windows system, not the android system. So it's trying to redirect the output to c:/data/flash_image or some such nonsense. Since Windows doesn't do / for it's directory structure, but instead uses \ it gacks trying to find the directory to put it in (which would be wrong even if it worked, since it would be on your hard drive, not the phone). You can change the cat line to this:
Code:
adb shell cp /sdcard/flash_image /data/flash_image
and it should work just as well. Anytime you use a redirect in a batch script like that it's going to try and redirect to Windows. If it wasn't my day off and I wasn't so tired I might figure out a fix for that, but the code I posted above should do the trick well enough. I wasn't sure initially why people wanted to to read the file into another one in the first place, but I did it with cp when I rooted and it worked fine. I suggest testing it, and then possibly changing your program. That way you can get rid of sendkeys and people breaking root by clicking something when it's running
Click to expand...
Click to collapse
Thanks, I'll see how that works later on, and if it works ill just upload a zip file with the updated code. Don't like the whole sendkeys thing,...I'd like to figure out on making it work without batch files... but I no pro code lol
Sent from my HTC EVO using Tapatalk
If I am already rooted can I skip right to Unlock Nand? I did root using the toast method.
cmdauria said:
If I am already rooted can I skip right to Unlock Nand? I did root using the toast method.
Click to expand...
Click to collapse
It wont hurt to re-root just run the whole thing. make sure you backup of course
thanks OP great work I'm sure it will get even better and easier once you get rid of key presses
STICKY!!!!
would you mind just posting a zip with the main files and not the roms?
im running low on space and wouldnt mind saving 300 megs
Damn after I followed the 50 step-by-step and wish I had seen this earlier nice work might try this on my older bros in a few days
Sent from my Sprint HTC EVO 4G. via tapatalk
cmdauria said:
If I am already rooted can I skip right to Unlock Nand? I did root using the toast method.
Click to expand...
Click to collapse
Yes, but you must run on the pushfiles.bat file before you goto step 2.
CYBERxNUKE said:
would you mind just posting a zip with the main files and not the roms?
im running low on space and wouldnt mind saving 300 megs
Click to expand...
Click to collapse
http://www.megaupload.com/?d=N6GV5NNP - no .img or .zip files
make sure you have the first PC36IMG.zip from the first root tutorial and the 2nd PC36IMG.zip from the nand unlock rename it eng-PC36IMG.zip or else you'll break it =(
Hi,
If I do this method will I be able to load custom Roms following these steps? I found these on another site and I am a noob so this one step thing would be great for me to get my feet wet...but the whole reason I would root is so that I could try another ROM...
Here are the steps I found...earlier it said I needed adb and sdk tools so I'm not sure if below will work if I don't have that installed on my computer.
Choose a ROM you want to try. Download it and save it to your computer (do NOT extract it, leave it as a .zip)
2. Plug the phone in via USB cable and mount the sd card so we can transfer files to it.
3. Copy the ROM .zip file and save it to the root of the sd card (NOT in any folders just on the sd card itself). Once it is done copying, unplug the phone from the usb cable.
4. Turn off the phone, then turn it back on by holding down Volume Down and Power until the white bootloader screen comes up (if it finds the PC36IMG.zip on your sd because you didn’t delete it, just say NO when it asks you if you want to update). Now using the volume buttons select Fastboot, then select Recovery and wait for the phone to boot into recovery mode.
5. Scroll to Wipe Data, select wipe data/factory reset and then select wipe dalvik cache.
6. Now scroll to Apply .zip from sd card and select the ROM .zip file we saved to the sdcard and wait for it to finish flashing. Once it is done, hit reboot and you are all set! Enjoy!
OP theres an updates restore image much better options from armon .02 works for people who have bad sectors ALLOT of us have
but 01 is for those who dont try that first
http://forum.xda-developers.com/showthread.php?t=705026
ken987 said:
Hi,
If I do this method will I be able to load custom Roms following these steps? I found these on another site and I am a noob so this one step thing would be great for me to get my feet wet...but the whole reason I would root is so that I could try another ROM...
Here are the steps I found...earlier it said I needed adb and sdk tools so I'm not sure if below will work if I don't have that installed on my computer.
Choose a ROM you want to try. Download it and save it to your computer (do NOT extract it, leave it as a .zip)
2. Plug the phone in via USB cable and mount the sd card so we can transfer files to it.
3. Copy the ROM .zip file and save it to the root of the sd card (NOT in any folders just on the sd card itself). Once it is done copying, unplug the phone from the usb cable.
4. Turn off the phone, then turn it back on by holding down Volume Down and Power until the white bootloader screen comes up (if it finds the PC36IMG.zip on your sd because you didn’t delete it, just say NO when it asks you if you want to update). Now using the volume buttons select Fastboot, then select Recovery and wait for the phone to boot into recovery mode.
5. Scroll to Wipe Data, select wipe data/factory reset and then select wipe dalvik cache.
6. Now scroll to Apply .zip from sd card and select the ROM .zip file we saved to the sdcard and wait for it to finish flashing. Once it is done, hit reboot and you are all set! Enjoy!
Click to expand...
Click to collapse
1. The program includes adb, just download, unzip and run Simple Root.exe
2.Yes you will be able to install custom roms after you have completed the all the steps.
3. Those are not complete steps, but its sorta on the right track... have you done the first part of root?
great job on making this easy guys.... To bad I couldnt wait longer than a week to root.
jiqqaman said:
1. The program includes adb, just download, unzip and run Simple Root.exe
2.Yes you will be able to install custom roms after you have completed the all the steps.
3. Those are not complete steps, but its sorta on the right track... have you done the first part of root?
Click to expand...
Click to collapse
Thanks for the quick reply. No, I am a new EVO owner and this is my first android phone. I was an iPhone user but I have come over to the Android side. No regrets. I have basically a new EVO with the OTA update installed. So my goal would be to run your one click method and then learn how to load roms. I also read that people have some kind of rom loader on their phone that sounded pretty easy so I need to do more searching on the forums here so I can learn.
Ken
This would have saved me 3 hours....
Thanks dude though this seems awesome.
Videos are titled "Hero 4g" btw.
Part 1 worked for me but part 2 doesn't. When I click yes on part 2 I get a screen that says "Unhandled exceptin has occured" and it gives me a option to continue or quit and I click continue and it closes out.
Does this method work if I already have the .6 stock rom on my device?
I saw a thread in general, answered it, and figured this is a better place for this sort of thing. This only applies to the T-Mobile branded Sensation, but might help others as well.
1. Open up Root Explorer and navigate to where you put the bootanimation.zip you want to use.
2. Copy it from there then go to /system/customize/resource.
3. In Root Explorer, then make sure to click the "Mount R/W" button.
4. Paste it there.
5. Find the file "TMOUS_bootanimation.zip" and rename it to "TMOUS_bootanimation.zip.bak" or something of the like.
6. Rename the file you pasted to "TMOUS_bootanimation.zip" and reboot.
There you have it! I've tested it and it works for those of you that managed to get S-OFF and perm root working.
I also wanted to note that my personal experience with this did NOT require changing any file permissions. Your mileage may vary.
I've added the boot animation that was in the leaked video from AlphaRevX to get you started:
View attachment bootanimation.zip
Do you know of any boot animations for the qHD display? That might be a great thing to add to your post.
You need to change permissions otherwise you will get blank screen.
Sent from my HTC Sensation 4G using XDA App
devitek said:
5. Find the file "TMOUS_bootanimation.zip" and rename it to "TMOUS_bootanimation.zip.bak" or something of the like.
6. Rename the file you pasted to "TMOUS_bootanimation.zip" and reboot.
Click to expand...
Click to collapse
Just for your information:
On my german Sensation the file is named "TMDE_bootanimation.zip".
deanesn said:
You need to change permissions otherwise you will get blank screen.
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
i keep getting a blank screen were or how do you change permissions ?
in root explorer hold your finger on the file till the menu pops up. Tap on "permissions"
Owner: read & write checked, execute unchecked
Group: read checked, rest unchecked
Others: read checked, rest unchecked
all special permissions unchecked
Kupfel said:
in root explorer hold your finger on the file till the menu pops up. Tap on "permissions"
Owner: read & write checked, execute unchecked
Group: read checked, rest unchecked
Others: read checked, rest unchecked
all special permissions unchecked
Click to expand...
Click to collapse
thx did that but did not work keep giving me a blanc screen only the tmous animation works ..
Your resolution must be wrong? Did you creat the animation your self?
Sent from my HTC Sensation 4G using XDA App
deanesn said:
Your resolution must be wrong? Did you creat the animation your self?
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
yes i did im guessing im doing something wrong i will try it with another one and see if it works , what resolution should i use if i only use a pic how do we make our own boots animations ?
It's your zip file. To make it work just pull the oem one and remove the files from within using winrar and insert yours same way. That will fix it. I know it's the compression of the zip file but can't remember how to compress it. Search the forum for boot animation compression or google it.
Sent from my HTC Sensation 4G using XDA App
Thanks! I made it my boot down and boot up animation LOL
since a lot of you guys are having problems making bootanimations ...
1. the zip file must not have any compression
You can do this with 7zip. Right click the files, 7zip -> add to archive -> for "compression level" select "store"
2. you should sign the zip
not sure if this is necessary although I simply sign everything that goes into my system folders. You can use ZipSigner from the market. (For "key/mode" select "platform")
3. rename the extension of the current bootanimation to .bak or just skip this if you never want to use it anymore
4. copy the signed file to system/customize/resource with root explorer
5. in root explorer hold your finger on the file till the menu pops up. Tap on "permissions"
Owner: read & write checked, execute unchecked
Group: read checked, rest unchecked
Others: read checked, rest unchecked
6. restart and you're done!
I attached an animated dark blue qHD HTC quietly brilliant bootanimation that I made for good measure.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
is it a video that u brake down in to frames or is it pics that you take i have no idea how to start i can do the last part no problem but how or were to start would b a great help thx ...
oh well why not..
1. create a folder called "android" and place the frames of your animation in PNG format in that folder.
2. name them as follows:
NAME_01.png
NAME_02.png
...
NAME_xx.png
3. create a text file called "desc.txt" containing for example:
540 960 15
p 1 1 android
explanation of the desc file:
Width Height Frame-rate
p Loop Pause Folder
first line: width height frames-rate
second line: p just stands for play. the first number says how often to loop the animation. The second number says for how long to pause the animation after every loop. the string is the name of the folder we created above.
So now you have the desc.txt and a folder with your png files - compress them as uncompressed zip file. Continue as described in my previous post.
wouldnt it be easier to just adb push it to that directory?
Kupfel said:
oh well why not..
1. create a folder called "android" and place the frames of your animation in PNG format in that folder.
2. name them as follows:
NAME_01.png
NAME_02.png
...
NAME_xx.png
3. create a text file called "desc.txt" containing for example:
540 960 15
p 1 1 android
explanation of the desc file:
Width Height Frame-rate
p Loop Pause Folder
first line: width height frames-rate
second line: p just stands for play. the first number says how often to loop the animation. The second number says for how long to pause the animation after every loop. the string is the name of the folder we created above.
So now you have the desc.txt and a folder with your png files - compress them as uncompressed zip file. Continue as described in my previous post.
Click to expand...
Click to collapse
thx for your help
Shaquiel Harris said:
wouldnt it be easier to just adb push it to that directory?
Click to expand...
Click to collapse
im new to this and is too confusing for me i tried almost all day i can make other boot animations to work but i cant create my owns and at this point i give up thx
Shaquiel Harris said:
wouldnt it be easier to just adb push it to that directory?
Click to expand...
Click to collapse
yeah probably but then most likely the next question would be "what is adb and how do i use it"
Kupfel said:
yeah probably but then most likely the next question would be "what is adb and how do i use it"
Click to expand...
Click to collapse
is not the what it is but the how we make them , i can put the files in the directory i can rename it , but the thing is how to create them , were to start , step by step i created a file name android put 4 pictures in there png,name them 01,02,etc etc used a desc.txt file from another animation did the resolution end the loop set up everything then using 7zip made the zip but still did not worked ......
gilbert11231123 said:
is not the what it is but the how we make them , i can put the files in the directory i can rename it , but the thing is how to create them , were to start , step by step i created a file name android put 4 pictures in there png,name them 01,02,etc etc used a desc.txt file from another animation did the resolution end the loop set up everything then using 7zip made the zip but still did not worked ......
Click to expand...
Click to collapse
search button is your friend http://www.google.com/cse?q=boot+an...ub-2900107662879704:fs7umqefhnf&ie=ISO-8859-1
Our Sense 4 ROMs in Development forums have HTC Sense Input ( Default Keyboard ) without trace which was present in Sense 3.5 based ROM.
Here is the apk of Stock HTC Sense Input from Desire C ROM for those who love it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Instructions:
*Use any Root Explorer capable File Explorer ( In my case, I used ES File Explorer )
*Copy apk to SD Card
*Copy the apk using file explorer
*Navigate to system/app
*Paste it ( Select 'Ok' when asked for 'Replace' confirmation )
*Reboot Phone
*Navigate to Language & Keyboard and turn on trace.
Note: This file can be replaced directly on .zip file before flashing ( Location : either \sd-ext\app_s or system\app )
Hit Thanks :good: if you liked it
Trying....!!!!
Sent from my HTC Explorer A310e using xda premium
thanks dude the keyboard worked .......! :good:
I copied it in system/app..... It said copy failed and now my original keyboard is also not working...
anmolkumar10 said:
I copied it in system/app..... It said copy failed and now my original keyboard is also not working...
Click to expand...
Click to collapse
Did u mount as r/o first?
Another color maybe ?
easygo:) said:
Our Sense 4 ROMs in Development forums have HTC Sense Input ( Default Keyboard ) without trace which was present in Sense 3.5 based ROM.
Here is the apk of Stock HTC Sense Input from Desire C ROM for those who love it.
Instructions:
*Use any Root Explorer capable File Explorer ( In my case, I used ES File Explorer )
*Copy apk to SD Card
*Copy the apk using file explorer
*Navigate to system/app
*Paste it ( Select 'Ok' when asked for 'Replace' confirmation )
*Reboot Phone
*Navigate to Language & Keyboard and turn on trace.
Note: This file can be replaced directly on .zip file before flashing ( Location : either \sd-ext\app_s or system\app )
Click to expand...
Click to collapse
It's great but do you think we can get it in any other color ? Like white or black or gray trace would be nice but Yellow ? Seriously ? Still does the job nicely so three cheers for you mate
anmolkumar10 said:
I copied it in system/app..... It said copy failed and now my original keyboard is also not working...
Click to expand...
Click to collapse
As asked by Parth_14, did you mount the /system with write capability?
Also after replacing apk, sometimes you might need to go to properties and change the permissions to rwe rw rw and then restart your mobile.
Hope that solves, else post back ur problem.
Araib93 said:
It's great but do you think we can get it in any other color ? Like white or black or gray trace would be nice but Yellow ? Seriously ? Still does the job nicely so three cheers for you mate
Click to expand...
Click to collapse
I too go with you, yellow was not so good. If i come across a different apk with color changing option, will surely post it.
What is trace ?
Sent from my HTC Explorer using xda premium
buggingme said:
What is trace ?
Sent from my HTC Explorer using xda premium
Click to expand...
Click to collapse
Trace=Swipe=Gesture Typing
Parth_14 said:
Did u mount as r/o first?
Click to expand...
Click to collapse
How to mount as r/o ?????
---------- Post added at 10:23 AM ---------- Previous post was at 10:19 AM ----------
easygo:) said:
As asked by Parth_14, did you mount the /system with write capability?
Also after replacing apk, sometimes you might need to go to properties and change the permissions to rwe rw rw and then restart your mobile.
Hope that solves, else post back ur problem.
Click to expand...
Click to collapse
How to mount /system with write capability???/ And I have also tried copying facebook for htc sense to /system folder and it too failed to copy.... Help... :crying:
anmolkumar10 said:
How to mount as r/o ?????
---------- Post added at 10:23 AM ---------- Previous post was at 10:19 AM ----------
How to mount /system with write capability???/ And I have also tried copying facebook for htc sense to /system folder and it too failed to copy.... Help... :crying:
Click to expand...
Click to collapse
Install 'ES File Explorer' from market.
Click menu key and select 'Settings' option
In that select 'Root settings' and tick(select) first option('Root Explorer'), then you'll get a super user request, allow that by selecting 'Ok'
Also select 3rd option 'Mount File System' to make /system as writable.
Now follow as said in first post.
All will work fine.
easygo:) said:
Install 'ES File Explorer' from market.
Click menu key and select 'Settings' option
In that select 'Root settings' and tick(select) first option('Root Explorer'), then you'll get a super user request, allow that by selecting 'Ok'
Also select 3rd option 'Mount File System' to make /system as writable.
Now follow as said in first post.
All will work fine.
Click to expand...
Click to collapse
I will try and tell u if it works.. Now I don't have my phone with me..
easygo:) said:
Install 'ES File Explorer' from market.
Click menu key and select 'Settings' option
In that select 'Root settings' and tick(select) first option('Root Explorer'), then you'll get a super user request, allow that by selecting 'Ok'
Also select 3rd option 'Mount File System' to make /system as writable.
Now follow as said in first post.
All will work fine.
Click to expand...
Click to collapse
I had mounted it as writable.... But still copy failed....
anmolkumar10 said:
I had mounted it as writable.... But still copy failed....
Click to expand...
Click to collapse
If you have followed all the steps, it would have surely worked out. Possibly try when you re-install sense rom next time.
Didn't work on cm10
before reboot es file explorer was showing icon of app in /system /app after reboot problem phrasing package...
Sent from my HTC Explorer A310e
dhrumangajjar said:
Didn't work on cm10
before reboot es file explorer was showing icon of app in /system /app after reboot problem phrasing package...
Sent from my HTC Explorer A310e
Click to expand...
Click to collapse
Works only with Sense 4 roms not any other type of ROM, for CM10 i would suggest Kii Keyboard.
easygo:) said:
Works only with Sense 4 roms not any other type of ROM, for CM10 i would suggest Kii Keyboard.
Click to expand...
Click to collapse
Can you send me the link to kii keyboard
Cox I'm not getting it on market, may be blocked in india....
Sent from my HTC Explorer A310e
dhrumangajjar said:
Can you send me the link to kii keyboard
Cox I'm not getting it on market, may be blocked in india....
Sent from my HTC Explorer A310e
Click to expand...
Click to collapse
Not blocked, probably typographical error or something. Anyways here's the link:
https://play.google.com/store/apps/details?id=com.zl.inputmethod.latin&feature=search_result#?t=W251bGwsMSwxLDEsImNvbS56bC5pbnB1dG1ldGhvZC5sYXRpbiJd
Thanks man. Kii seems to b a good keyboard.
Here is a guide on how to set up SVN on your Windows Computer so you can use it with ROMs like Liberty Sense 6. You must also have 7-zip installed.
How to set up SVN for the first time
First download Tortoise SVN from here and install it.
Once it is installed, open a folder inside your user's folder. This is where you will create another folder later
Now right-click in empty space, select Tortoise SVN and select Settings
Picture Help:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Once in Settings, click General and click Edit beside Subversion Configuration file
Picture Help:
A text file will open up. Press CTRL+F and type in (without quotes) "global-ignores".
The line your looking for will be like: # global-ignores = *.o *.lo *.la *.al .libs *.so *.so.[0-9]* *.a *.pyc *.pyo __pycache__
Picture Help:
Now no must delete the "*.so" part only, NOT the "*.so.[0-9]*" part.
Picture Help:
Once it is deleted it should look like the picture below
Picture Help:
Use the picture just before this one to compare and see if you went wrong
Now save the file by clicking File, then Save and close the Notepad (You won't need a picture to help you out there )
You can now close the Tortoise SVN Settings window
Now create a new folder anywhere inside your user's folder or on external storage
(You can call it whatever you want, I named mine Liberty-SixthSense)
Now go inside that folder, right-click in any empty space and select SVN Checkout
Picture Help:
In the Checkout window type or copy in for the URL of Repository (without quotes) "http://sense-6-for-one-s.googlecode.com/svn/trunk/"
Picture Help:
The Checkout Directory will be the folder where you opened up the SVN Checkout window
Then press OK and it will start downloading the files (this will take some time)
Picture Help:
When its finished you should see something these files and folders in the picture below
Picture Help:
I didn't download all the files because it took too long, but you will have the following files & folders
META-INF, additions, boot.img, data, system
Now you must make another folder in the same directory as the one used to download the files. This will be our "output" folder.
(Call it what you want)
Picture Help:
Now go back to the folder we created first, right-click in empty space, select Tortoise SVN and then select Export
Picture Help:
In the window that pops up navigate to your "output" folder, click on it once and click Select Folder
Picture Help:
Once its finished copying the files to your "output" folder, go to it and highlight all the files (Either by clicking and holding and drag to highlight all files or CTRL + Click on each file)then right-clicking in empty space, then select 7-zip and select Add to Archive
Picture Help:
In the 7-zip window, you must select the archive format as "zip". You can change the name as long it has the .zip at the end. Then press OK to start zipping
Picture Help:
That's it , now place the .zip file you just created on your SD Card and flash away!!! Remember, you need HBOOT 2.16 installed. If you don't know how to do that, then follow my other guide here
How to receive and flash new updates
First you have to go to the location of your "output" folder, open it, select all files, right click on them and delete them.
Picture Help:
Now go back to the location of your "output" folder and right click on the other folder and select SVN Update, it should have a green tick on it now
Picture Help:
It will begin to pull any new or changed files which won't take long. Then once its finished pulling the files open the folder with the green tick, right-click in empty space, select Tortoise SVN and then select Export
Picture Help:
In the window that pops up navigate to your "output" folder, click on it once and click Select Folder
Picture Help:
Once its finished copying the files to your "output" folder, go to it and highlight all the files (Either by clicking and holding and drag to highlight all files or CTRL + Click on each file)then right-clicking in empty space, then select 7-zip and select Add to Archive
Picture Help:
In the 7-zip window, you must select the archive format as "zip". You can change the name as long it has the .zip at the end. Then press OK to start zipping
Picture Help:
And that is it, just copy it to your SD Card and flash it. Make sure to select Update Only in the Aroma Installer
Enjoy!!!
Can I put it somewhere else than my Users Folder? On an externel Disk?
Samstag494 said:
Can I put it somewhere else than my Users Folder? On an externel Disk?
Click to expand...
Click to collapse
yes you can, anywhere really in your user folder or on an external drive, just not directly on C:\
dd98 said:
Here is a guide on how to set up SVN on your Windows Computer so you can use it with ROMs like Liberty Sense 6.
Click to expand...
Click to collapse
Great guide, worked perfectly. Thank you.
Ok, it works.
but I have one question:
after the update, we need to export and ZIP a whole rom, not only update files ?
81grzes said:
Ok, it works.
but I have one question:
after the update, we need to export and ZIP a whole rom, not only update files ?
Click to expand...
Click to collapse
delete everything inside the output folder do an svn update and export to the output folder
YES
and after that I have a new .zip file ~ 1,2GB...
I was thinking that is possible to make a small .zip file only with updates
But now I understend everything.
when downloading the folders, can it be paused and is it resumeable . or what happens if network fails ?
skyliner129 said:
when downloading the folders, can it be paused and is it resumeable . or what happens if network fails ?
Click to expand...
Click to collapse
no its not resumable and if your network fails ur screwed
[/COLOR]
dd98 said:
no its not resumable and if your network fails ur screwed
Click to expand...
Click to collapse
duly noted.thanks for your reply
skyliner129 said:
[/COLOR]
duly noted.thanks for your reply
Click to expand...
Click to collapse
its the svn client, it doesnt support pausing
i get the following error code and i followed the instruction
Command: Checkout from http://sense- 6-for-one-s.googlecode.com/svn/trunk, revision HEAD, Fully recursive, Externals included
Error: Unable to connect to a repository at URL
Error: 'http://sense-%206-for-one-s.googlecode.com/svn/trunk'
Error: No such host is known.
Completed!:
Great!
I will consider this tutorial to upgrade my One S to the Liberty Sixth Sense via SVN.
skyliner129 said:
i get the following error code and i followed the instruction
Command: Checkout from http://sense- 6-for-one-s.googlecode.com/svn/trunk, revision HEAD, Fully recursive, Externals included
Error: Unable to connect to a repository at URL
Error: 'http://sense-%206-for-one-s.googlecode.com/svn/trunk'
Error: No such host is known.
Completed!:
Click to expand...
Click to collapse
what country are you in because i've heard of some people not being able to access google code due to their location
dd98 said:
what country are you in because i've heard of some people not being able to access google code due to their location
Click to expand...
Click to collapse
Nigeria, defeated by France in the world cup competition. And is there any solution to this cos I would really like to use svn to download and update sixth sense
skyliner129 said:
Nigeria, defeated by France in the world cup competition. And is there any solution to this cos I would really like to use svn to download and update sixth sense
Click to expand...
Click to collapse
You could try installing hotspot shield maybe that could help and dont worry about the nigeria team they were unlucky against argentina and france
dd98 said:
You could try installing hotspot shield maybe that could help and dont worry about the nigeria team they were unlucky against argentina and france
Click to expand...
Click to collapse
thanks for your reply. I'll try out the hotspot shield. I see your a football fanatic as well. thought guys like you only have fun with tech stuffs.thanks again for your reply
skyliner129 said:
thanks for your reply. I'll try out the hotspot shield. I see your a football fanatic as well. thought guys like you only have fun with tech stuffs.thanks again for your reply
Click to expand...
Click to collapse
well at least nigeria got to the world cup, ireland didnt :crying:
dd98 said:
well at least nigeria got to the world cup, ireland didnt :crying:
Click to expand...
Click to collapse
England lost at very start btw today germany totally rocked with 7 goals against Brazil.:victory:
bilal_liberty said:
England lost at very start btw today germany totally rocked with 7 goals against Brazil.:victory:
Click to expand...
Click to collapse
costa rica were very good and yeah the brazil germany mach was very funny