I love my shift. After rooting and overclocking this phone is the best ive ever had. However, when researching info on this phone I found that it had an OC of 1.8 ghz.
The only kernel I see is bnice's which reaches 1.51 as we all know. Is this because thats the most stable oc?
xakantorx said:
I love my shift. After rooting and overclocking this phone is the best ive ever had. However, when researching info on this phone I found that it had an OC of 1.8 ghz.
The only kernel I see is bnice's which reaches 1.51 as we all know. Is this because thats the most stable oc?
Click to expand...
Click to collapse
There is an 1.8Ghz Kernel that bcnice has out there, I am running it but I only keep mine OCed to 1.5 to conserve a little battery. The kernels are here.
I hope I didn't overstep by posting the kernel link, if so I will delete it.
Related
I just installed Serendipity 2.0 w/ Glitterballs' latest kernel, which supports OC up t 1.2 GHz, and I wanted to know, is it possible to stably overclock my phone to 1.2 GHz without variable frequency or UV?
If so, how would I go about OCing my phone?
Also, will OCing affect the health of my CPU and lead to increased wear and tear in the long run?
Thanks in advance
If all you want is to overclock, you don't have to change anything.
Unless you plan on keeping your phone for 5 years OC won't do any harm.
Sent from my Captivate.
Thanks MikeyMike01! Looks like I'm going to OC then. And btw, I'm a huge fan of your ROMs
I have been looking for a couple of days, and I can't seem to find my answer anywhere. Sorry if this question has already been asked. Does the Tiamat Kernel come overclock already, or do you need to use an app like SetCPU?
SetCPU is needed
Thank Brenardo.
I really want to root so i can get the USB host, and SD card. I just didn't want the overclock. I was told that Tiamat was overclock from the get go.
anovinger said:
Thank Brenardo.
I really want to root so i can get the USB host, and SD card. I just didn't want the overclock. I was told that Tiamat was overclock from the get go.
Click to expand...
Click to collapse
If you do not run an overclock program, the stock max is still on the CPU.
Sent from my Xoom
Do you know what the set Max is on the tiamat kernel?
anovinger said:
Do you know what the set Max is on the tiamat kernel?
Click to expand...
Click to collapse
1ghz
Sent from my Xoom
bwcorvus said:
1ghz
Sent from my Xoom
Click to expand...
Click to collapse
even without an OC app running my CPU sometimes runs up to 1504mhz. I've tried every kernel since the first tiamat one. I have a Canadian xoom rooted with one click. I'm using tiamat 1.4.1 and the issue isn't fixed. I've read many others experiencing the same issue. I've tried using setcpu and Droid OC to limit it to 1ghz but it still hits 1504. There both uninstalled now but I'm still having spikes. Just my 2 cents not trying to hyjack your thread. But if anyone has any input as to whats happening I'd appreciate it.
Also my battery life is significantly shorter since rooting. From about 9 hours to 4 now.
Any suggestions ?
Bandit504 said:
even without an OC app running my CPU sometimes runs up to 1504mhz. I've tried every kernel since the first tiamat one. I have a Canadian xoom rooted with one click. I'm using tiamat 1.4.1 and the issue isn't fixed. I've read many others experiencing the same issue. I've tried using setcpu and Droid OC to limit it to 1ghz but it still hits 1504. There both uninstalled now but I'm still having spikes. Just my 2 cents not trying to hyjack your thread. But if anyone has any input as to whats happening I'd appreciate it.
Also my battery life is significantly shorter since rooting. From about 9 hours to 4 now.
Any suggestions ?
Click to expand...
Click to collapse
How are you seeing its over with no app? I'm not calling you a liar, just trying to get all the facts. In all test we have done, even with the setcpu oc to 1.5/1.5, we actually see the cpu running at 1 ghz after a wakeup.
Sent from my PC36100
bwcorvus said:
How are you seeing its over with no app? I'm not calling you a liar, just trying to get all the facts. In all test we have done, even with the setcpu oc to 1.5/1.5, we actually see the cpu running at 1 ghz after a wakeup.
Sent from my PC36100
Click to expand...
Click to collapse
I'm watching the temp+CPU widget to monitor what's happening. Are you suggesting its giving inaccurate readings? Setcpu at 1ghz would still show random spikes to 1504mhz. I don't have any OC tools installed right now but my widget still shows it hitting 1504 especially under load. I was thinking of returning to stock and rooting manually but it not a huge problem just strange. I was hoping the new kernel would fix it but its still happening. Is there anything I can do besides start from scratch?
Bandit504 said:
I'm watching the temp+CPU widget to monitor what's happening. Are you suggesting its giving inaccurate readings? Setcpu at 1ghz would still show random spikes to 1504mhz. I don't have any OC tools installed right now but my widget still shows it hitting 1504 especially under load. I was thinking of returning to stock and rooting manually but it not a huge problem just strange. I was hoping the new kernel would fix it but its still happening. Is there anything I can do besides start from scratch?
Click to expand...
Click to collapse
Yea setcpu is not 100% yet. Does your widget show both cpus? What we were testing was the second CPU. After you xoom goes to sleep, the second CPU is never set again by setcpu (known bug). So lets say you are running 1.0/1.5. After you xoom goes to sleep you will wake up with cpu 0 at a max of 1.5, but cpu 1 will have a max of 1.0. The info i gave earlier was said wrong. I was actually looking at the wrong line, so you may in fact be correct on the 1.5ghz random jump . Gonna stop talking now, as we are hyjacking someone else's thread .
In theory, you should not need overclocking software, as the max is set at 1ghz on both cpus. But as said above by Bandit504, this may NOT be the case .
Thanks bwcorvus and Bandit504 . So I guess to call it is safe, it would be good idea to use SetCPU, or Droid Overclock and have the maximum set to 1 ghz, to keep the proc from hitting the 1.5 ghz speed. I just hate to ruin the hardware with the overclock, and have to drop another $600 for another xoom.
Does anyone know of some good apps (preferably free) that I can use to overclock a rooted droid charge, with the latest altered beast ROM and kernel?
There aren't any overclock kernels at this point. Its being worked on. Just be patient.
Fe_Man said:
Does anyone know of some good apps (preferably free) that I can use to overclock a rooted droid charge, with the latest altered beast ROM and kernel?
Click to expand...
Click to collapse
You can try tegrak from the market if you really want oc.
In all honesty, just wait for a kernel to come out that will actually oc. I'd love a kernel that uses voltage control and will wait for that...
Ahh, thanks. This is my first android device so I have no idea what to expect and when
If I can ever get my config straightened out, I was going to look into doing an OC kernel that uses Voltage Control, similar to nemesis2all's kernels for the Fascinate. Still trying to get a working config though.
My opinion though is that OCing the hummingbird processor is useless, and does little for performance on a day-to-day basis and only serves to give you big numbers in benchmarks while reducing battery life.
I mostly used the 1120 step skipping 1000 and scoring serious uv was awesome
So I have...
My G2x Is running at 1gz\.4 I don't find a need to OV it...
The UV is set at -50 at 1gz and at 800 it is -100 and at 500 and 400 at -200mv.
What are your sets? I would like to see other people's choices. I will report on my battery life later. I can't today since I have been going into recovery mode all morning.
Ps. As profiles go...
I have screen off set to 800/400. I don't like it lagging when i turn my screen on.
I can run stress test easily with my settings. No hiccups or anything.
EDIT:
So I was asked what kernel I'm using... I will post my ROM + KErnel! and just to let you know, my G2x has never had any problems so that may be way my G2x can get -200 on 500 and 400
And I am using faux's CM7 Kernel Version 0.2.4
Full name:
"2.6.32.41-CM7-Faux123-v0.2.4
Mod version
CyanogenMod-EagleBlood_v1.2
Im new to setcpu, good thread for me to learn a bit more from other users...
Sent from my LG-P999 using XDA App
Yes I'm trying to decide on SetCPU or PimpMyCPU so any info is appreciated
GManLynx said:
So I have...
My G2x Is running at 1gz\.4 I don't find a need to OV it...
The UV is set at -50 at 1gz and at 800 it is -100 and at 500 and 400 at -200mv.
What are your sets? I would like to see other people's choices. I will report on my battery life later. I can't today since I have been going into recovery mode all morning.
Ps. As profiles go...
I have screen off set to 800/400. I don't like it lagging when i turn my screen on.
I can run stress test easily with my settings. No hiccups or anything.
Click to expand...
Click to collapse
What kernal are you using?
GManLynx said:
So I have...
My G2x Is running at 1gz\.4 I don't find a need to OV it...
The UV is set at -50 at 1gz and at 800 it is -100 and at 500 and 400 at -200mv.
What are your sets? I would like to see other people's choices. I will report on my battery life later. I can't today since I have been going into recovery mode all morning.
Ps. As profiles go...
I have screen off set to 800/400. I don't like it lagging when i turn my screen on.
I can run stress test easily with my settings. No hiccups or anything.
Click to expand...
Click to collapse
How are you not getting reboot problems with 400 at -200mv? I'm using faux's froyo kernel and when I undervolt at -100mv i get rebooting problems
I replied to your comment in my main post, since other people may be interested in that and that will cause them not to scan the pages.
Bump :\ I would like input
so how is your battery life?
Bad. Something about those settings messed it up. I much prefer just using the custom rom default kernel its much better on the battery
Sent from my LG-P999 using XDA Premium App
My chip could only use faux's OC 1.2ghz, using the kernel OC 1.5 would cause my phone to boot loop. I could go stable @ faux OC 1.2 with minimum UV, getting qudrant score of atleast 3000 - 3500. Another kernel that i tried is MOrfic's, I can go stable up to 1.4 Ghz/minimum UV- quadrant of atleast 4000-4300. I believe i have what they say as the "weak chip" though running OC @ 1.4 ghz doesn't make it look weak. Thanks to the great DevS!
So,
We've all got our Xooms, what are you experiences with each kernel, which one do you find the best? (and with what governors?)
Secondly, What are your UV values? Whats the best you've got when trying to undervolt?
Ive just got my Xoom (32gb, wifi, uk) and im just on the brink of experimenting with the undervolting, i searched but couldn't find a relevent topic.
So please, do post values, kernels and your experiences
ah okay, I thought this would be quite an important issue,
I've managed to get the xoom to handle 1.6 undervolting each state by 100mv
I am however having trouble getting both cores to stabilse at 1.6. Using os monitor I can see that only one core sticks, the other goes down to 300 mhz,.
tremblingwater said:
So,
We've all got our Xooms, what are you experiences with each kernel, which one do you find the best? (and with what governors?)
Secondly, What are your UV values? Whats the best you've got when trying to undervolt?
Ive just got my Xoom (32gb, wifi, uk) and im just on the brink of experimenting with the undervolting, i searched but couldn't find a relevent topic.
So please, do post values, kernels and your experiences
Click to expand...
Click to collapse
I haven't fooled around with over/undervolting, but I like the oc gpu version of the Tachi kernel.
Zero problems and very smooth. I am very stable at 1504MGh
okantomi said:
I haven't fooled around with over/undervolting, but I like the oc gpu version of the Tachi kernel.
Zero problems and very smooth. I am very stable at 1504MGh
Click to expand...
Click to collapse
what you using for OC?
Setcpu or pimp my cpu or anything else.
Which governor you use?
I had lots of rebooting with setcpu especially after applying voltages.
rohit3192 said:
what you using for OC?
Setcpu or pimp my cpu or anything else.
Which governor you use?
I had lots of rebooting with setcpu especially after applying voltages.
Click to expand...
Click to collapse
I use CPU Master for oc and setting profiles. I do have the oc set on boot, because 1504 is my sweetspot and is stable.
Just installed Moray+tachi
Mobo player freezed few times,rest ok.
Edit: Trying "No frills" discarded Set Cpu for now.
rohit3192 said:
Just installed Moray+tachi
Mobo player freezed few times,rest ok.
Edit: Trying "No frills" discarded Set Cpu for now.
Click to expand...
Click to collapse
No Frills is good, but I don't know if you can set profiles, which are good to save battery, control overheating, etc...