Related
Figures they'd come out with it a week before I'm thinking of picking up an Imate Ultimate 8150. But it's out for those of you interested link below.
P3600 Full Body Invisible Shield
http://www.shieldzone.com/item_description/HTCP3600I.html
Nice!! It's listed for the P3600i, but I guess it's exactly the same as the P3600.
Anybody tried it already?? Better than a regular silicon cover?
How does this work?
If it is stretched all over the PDA, how is it joined/sealed? What about removing the batter cover or using the thumb wheel? Is it fixed like cling-film?
Also, the screen is recessed from the surround so if it is stretched around the housing and screen, then there would seem to be a gap between the screen and this cover, so what will the sensitivity of the screen be like?
PaulusUK said:
How does this work?
If it is stretched all over the PDA, how is it joined/sealed? What about removing the batter cover or using the thumb wheel? Is it fixed like cling-film?
Also, the screen is recessed from the surround so if it is stretched around the housing and screen, then there would seem to be a gap between the screen and this cover, so what will the sensitivity of the screen be like?
Click to expand...
Click to collapse
If you followed the link and watched the installation video showing it being applied to an ipod you wouldn't have asked.........suggest you try that first.
Andych said:
If you followed the link and watched the installation video showing it being applied to an ipod you wouldn't have asked.........suggest you try that first.
Click to expand...
Click to collapse
looks like it would be a least 3 pieces - one for the screen, then one for the keys, and one for the back - which does not protect the sides. And the video doesn't show how it fits on the phone, it shows how it fits on the front of a ipod - so don't be a smart a*s. He was asking how it fits on this phone not an ipod dumb a*s.
earl00 said:
looks like it would be a least 3 pieces - one for the screen, then one for the keys, and one for the back - which does not protect the sides. And the video doesn't show how it fits on the phone, it shows how it fits on the front of a ipod - so don't be a smart a*s. He was asking how it fits on this phone not an ipod dumb a*s.
Click to expand...
Click to collapse
Get life....yes the clip shows it being fitted to an ipod......if you gothered to watch the clip you would have seen that the piece for the back also does the sides as they wrap around.....apart from the size etc the actual method of applying this will be the same.
Next time smart a*s do your homework rather than mouthing off.
Oh yes all my questions answered if only I had watched the ipod video.
Now All I need is an m700 that is exactly the same shape as an ipod, with all the buttons in the same place, with a flush screen, and well, all very ipodish, and then it will all be clear.
So this will be no more than a screen protector on the PDA. It will not protect the buttons or lower raised section of the housing. Also won't protect the sides (too many buttons), and it seems that the tight curves will be a problem for this cover. I can see this peeling off the m700 in a very short time
If you know so much about it, then can you explain how it will work with a recessed screen? Will I be able to tap it all over with a key and not damage the phone, and if I throw it in a box of coins, will all the phone be safe from scratches and chips - just like the ipod?
PaulusUK said:
Oh yes all my questions answered if only I had watched the ipod video.
Now All I need is an m700 that is exactly the same shape as an ipod, with all the buttons in the same place, with a flush screen, and well, all very ipodish, and then it will all be clear.
So this will be no more than a screen protector on the PDA. It will not protect the buttons or lower raised section of the housing. Also won't protect the sides (too many buttons), and it seems that the tight curves will be a problem for this cover. I can see this peeling off the m700 in a very short time
If you know so much about it, then can you explain how it will work with a recessed screen? Will I be able to tap it all over with a key and not damage the phone, and if I throw it in a box of coins, will all the phone be safe from scratches and chips - just like the ipod?
Click to expand...
Click to collapse
Lets get this straight....I haven't used this product...however when I saw the "link" I went to the manufacturers site to get a better understanding of it....
I watched the video and while it was of it being fitted to an ipod I got a basic understanding of how it could be fitted to a P3600i.
I didn't think it was "cling wrap", I understood that there would be several sections involved....including one for the recessed screen (yes, just like a normal screen protector) and I too would be skeptical of it protecting all parts of the phone.
There is a tendency in these forums for people to not search out information but to ask seemingly dumb questions.....
As this product is new for this model....why not just ask if anyone has tried it or ask the manufacturer for more information.....or is that too hard to do????
NOT FULL BODY...JUST SCREEN ONLY
The site says full body not Screen only, that's a separate option...
I would really like to know if and how exactly this works on 3600.
I actually have silicon case and screen protector for mine, but this would make it considerably smaller...
Bought and use the InvisibleShield
Folks,
I bought it and had it send to Holland. Took about 1 to 2 weeks but ok I am not in a hurry.
The full body covers basically all the shiny black plastic plus the screen. The rest (middles of the sides and the front keys) are not covered. Also offcourse the camera, speakers etc are not covered. However, and this is probably the difference between P3600 and P3600i the front camara is covered by the shield blurring the image. Now I have already put it on the camera but the next time I would use a hole puncher to add the extra hole. I probably will use a sharp hobby knife to cut an extra hole (on the other hand I never use video conferencing).
The plastic is more stronger and thicker then normal screen protectors. Haven't tried to scratch it on pupose and guess what I am not going to do it. If a scratch forms by accident I will mention it here.
The screen takes some getting used to with the new cover. The plastic does not "slide" as easy as the original screen protector or the screen itself. Maybe this is just in the first period.
The application process it pretty easy if you just take the time. Takes about 30 minutes if you do it slowly. Only 2 minor bubbles on the back but those are not really an issue, the rest is perfect.
Hey for 20 euro's I think it is a good deal. No horrible rubber case or GPS blocking metal case for me anymore. Only downside is that if the phone is dropped now there is no protection. This is only against scratches.
Lifetime guarantee so lets see how often I have to send it back.
All in all recommended so far (but that is just after 1 day of use)
I want to see it
Post a picture please
Isn't it invisible?..
See the invisible sheet
Well actually it is quit difficult to see but here are some picures. The picture from the side shows you some edges.
Edges
The edges that you can see in the pic don't seem to line up perfectly, how were the dimensions on the rest of the edges?
i've been thinkin of getting one of these since i saw them for ipods but that messy edge is scaring me away a little, also how are you finding the screen protector after a little more use?
Edges reply
Well the edges are more because of my talent I think. The reason why I showed you this is because at least you can see something. For the rest it alligns perfectly.
After using it for a while it still seems a great product. I accidentaly dropped the thing but no scratch at all. What you do notice is the slightly more pressure you need when using the stylo. Also the screen protector is not as smooth as the original screen making the sliding a little more difficult. Also the plastic sticks to your ear while calling. But all in all still recommended.
I just put it onto the white one...
...and it is invisible. You can see it only on buttons' silver surrounding, on white parts only the edges are visible if you try really hard. I haven't got a good enough camera to show it, sorry.
It has a sticky feeling about it (maybe needs to dry more?). I don't like it on the screen - feels sticky and thick. I'd say use a decent screen protector instead.
It came WITH the cut-out for a camera (it's 3600i shield, I've got 3600), so it fits like a glove.
Oh, it's not a stress-free, low pressure 15 minutes application like they advertise it. It's fekkin pain in the ar$e one hour job, you're swetting your ar$e off. And - I guess - you can never get it perfect at the end. There will always be a bubble or misaligned edge somewhere (or is it me?).
Long term use review to follow.
sabestian said:
...and it is invisible. You can see it only on buttons' silver surrounding, on white parts only the edges are visible if you try really hard. I haven't got a good enough camera to show it, sorry.
It has a sticky feeling about it (maybe needs to dry more?). I don't like it on the screen - feels sticky and thick. I'd say use a decent screen protector instead.
It came WITH the cut-out for a camera (it's 3600i shield, I've got 3600), so it fits like a glove.
Oh, it's not a stress-free, low pressure 15 minutes application like they advertise it. It's fekkin pain in the ar$e one hour job, you're swetting your ar$e off. And - I guess - you can never get it perfect at the end. There will always be a bubble or misaligned edge somewhere (or is it me?).
Long term use review to follow.
Click to expand...
Click to collapse
Any update to report? I'm thinking about buying one and would like your oppinion since you've now had it for a while.
Dimitri- said:
Folks,
I bought it and had it send to Holland. Took about 1 to 2 weeks but ok I am not in a hurry.
The full body covers basically all the shiny black plastic plus the screen. The rest (middles of the sides and the front keys) are not covered. Also offcourse the camera, speakers etc are not covered. However, and this is probably the difference between P3600 and P3600i the front camara is covered by the shield blurring the image. Now I have already put it on the camera but the next time I would use a hole puncher to add the extra hole. I probably will use a sharp hobby knife to cut an extra hole (on the other hand I never use video conferencing).
The plastic is more stronger and thicker then normal screen protectors. Haven't tried to scratch it on pupose and guess what I am not going to do it. If a scratch forms by accident I will mention it here.
The screen takes some getting used to with the new cover. The plastic does not "slide" as easy as the original screen protector or the screen itself. Maybe this is just in the first period.
The application process it pretty easy if you just take the time. Takes about 30 minutes if you do it slowly. Only 2 minor bubbles on the back but those are not really an issue, the rest is perfect.
Hey for 20 euro's I think it is a good deal. No horrible rubber case or GPS blocking metal case for me anymore. Only downside is that if the phone is dropped now there is no protection. This is only against scratches.
Lifetime guarantee so lets see how often I have to send it back.
All in all recommended so far (but that is just after 1 day of use)
Click to expand...
Click to collapse
Same question for you... Any updates? Thank you...
Definately recommended
After using it a few months I still think it is definately worth the few euro's. Ok it sticks a bit when calling for a long time and I think I even managed to get a small scratch on it but I sort of abuse the fact that I have the shield. Store it with keys, never use a case etc.
No I have bought some useless accessoires such as aluminium case (blocks GPS) and the remote for mediaplayer but the shield I would really recommend.
Cheers,
Dimitri.
Edited
more pictures: click
also: kinda solved. They're black marks and no scratches. Will try to get them away with some alcohol soon.
###################
ORIGINAL POST
###################
Hello,
I always use the original Android sleeve with my Nexus One. I have it in it in my pocket around 10 hours a day when working. (with the Trackball on the open side of the sleeve and the display to the "Droid" side)
A week ago (got it since 15th Jan) I noticed some "scratches" at the top on my N1.
Here's a crappy picture shot with a crappy cam.
Will do a better pic tomorrow but I think you can guess what I mean
###################
I stick the phone into the sleeve just as you described and haven't noticed any kind of scratches on the top. I've had it since Feb 18th.
St.Jimmy! said:
I stick the phone into the sleeve just as you described and haven't noticed any kind of scratches on the top. I've had it since Feb 18th.
Click to expand...
Click to collapse
The Pouch looks of decent quality to me aswell
I'm using it because I thought the quality is just great!
Well, it still is great but the scratches annoy the hell outta me..
noticed it a week ago and it wasn't that much as today :\
Maybe it does "rub" it off with some dust and much moving? I'm always going around and anything @ work, much movement in my pockets ^^
I think the scratches coz' by rubbing on the wall or something else, not by the pouch. I'm getting a case from case-mate though I like the pouch a lot but it's quite annoying sometimes.
what do you mean with wall?
I mean some rough surfaces
Its because the seams are on the inside, including the stitches. Those WILL rub on your phone and cause scratches if the phone moves around inside, even a little.
MintyFloss said:
Its because the seams are on the inside, including the stitches. Those WILL rub on your phone and cause scratches if the phone moves around inside, even a little.
Click to expand...
Click to collapse
Really? Cuz my phone's in the sleeve for probably 14 hours a day and is still flawless. Obviously you didn't look at the pic, cuz the scuffs are at the top that is exposed while in the sleeve. I'm betting the OP puts other stuff in that pocket with the phone... bad idea.
same here, I use the sleeve constantly and have no scratches...did you get dirt or something in your pouch?
Use the sleeve a lot and have no scratches or marks on the N1.
I don't see the N1 as being like an iPhone. For me the side and back is durable and I am not worried about scratches - only the screen concerns me which is why I have a screen protector...
Talking about how phones are made I have to say I think the HD2 is the most durable phone right now with quality and style. The top and sides are almost rubbery so quite resistant to scractches and the back is metal -which although not scratch proof is most definately very resistant to any wear.
xPatriicK said:
Hello,
I always use the original Android sleeve with my Nexus One. I have it in it in my pocket around 10 hours a day when working. (with the Trackball on the open side of the sleeve and the display to the "Droid" side)
A week ago (got it since 15th Jan) I noticed some "scratches" at the top on my N1.
Here's a crappy picture shot with a crappy cam.
Will do a better pic tomorrow but I think you can guess what I mean
Click to expand...
Click to collapse
Keep your case clean, I have experienced no such problems and I make it a point to keep the inside of the case clean for obvious reasons.
When cleaning the case, I turn the whole thing inside out, shake it out and vacuum it.
Edit: One thing I have noticed is that the phone is prone to marks/scratches quite easily when dropped or bumped into something, as opposed to normal wear and tear (in and out of pocket/case, rubbing against keys etc). I am not really surprised by this, just figured I would note it.
Mintyfloss is right, that's causing it and I were about to write it right now since I Googled the translation just before reading that post I'm not having anything else in my pocket!
How to avoid these "scratches"? Will put the phone with the bottom first in the sleeve now..
Edit: didn't see the second site until now
I also never ever dropped the phone.
cleaned the sleeve yesterday inside out, hope it helps..
Another edit, not sure if needed: I have the phone and. The sleeve upside down in my pocket
uansari1 said:
Really? Cuz my phone's in the sleeve for probably 14 hours a day and is still flawless. Obviously you didn't look at the pic, cuz the scuffs are at the top that is exposed while in the sleeve. I'm betting the OP puts other stuff in that pocket with the phone... bad idea.
Click to expand...
Click to collapse
No, I looked at the pics, and i also READ. OP says he puts the top of the phone into the bottom of the sleeve.
http://www.youtube.com/watch?v=gpGAW6L5x8U
http://www.youtube.com/watch?v=RfqwKa4bT74
St.Jimmy! said:
http://www.youtube.com/watch?v=gpGAW6L5x8U
http://www.youtube.com/watch?v=RfqwKa4bT74
Click to expand...
Click to collapse
Yea, the sleeve can't scratch the Teflon coated phone, it just marks it. I have heard in this forums that you can get away the marks with a little bit of alcohol and a handkerchief.
Hope this helps...
I thought I had a little bit of scratching in the same area, luckily it rubbed off
St.Jimmy! said:
http://www.youtube.com/watch?v=gpGAW6L5x8U
Click to expand...
Click to collapse
You know I'm not talking about the DISPLAY!?
Okay, new pictures.
this is how I put the Nexus One into the sleeve
this is a pic of the "scratch"
this and this too but another view
thanks for your answers
Actually, to be honest, I'm having the same thing happen with my phone. I put my phone in the the other way than you and I have those marks on the bottom. Although it doesn't really look or feel like scratches. Just looks like little black marks on it and could come off if you rubbed it with alcohol or something.
I dropped my Arrive onto a tile floor. As it slipped out of my hand a quick thought shot through my mind - should have bought the insurance. As pieces went everywhere I reached down to asses the damage.
The pieces were just the battery cover and batter. Since the keyboard was not out during the drop, I was surprised to see the battery cover come off, since I thought it impossible without extending the keyboard.
After putting everything back together and turning on the phone, all was well. Not a scratch or scuff to be found.
Whew!
That's one tough little bugger
tiny17 said:
I dropped my Arrive onto a tile floor. As it slipped out of my hand a quick thought shot through my mind - should have bought the insurance. As pieces went everywhere I reached down to asses the damage.
The pieces were just the battery cover and batter. Since the keyboard was not out during the drop, I was surprised to see the battery cover come off, since I thought it impossible without extending the keyboard.
After putting everything back together and turning on the phone, all was well. Not a scratch or scuff to be found.
Whew!
Click to expand...
Click to collapse
Yeah I've dropped mine twice now (!) which are the only two times I've dropped any of my phones in the last 10 years. I think the aluminum battery cover makes the phone very slippery to hold relative to other phones, and opening the keyboard requires enough force that sometimes the little bugger just gets away from me. I'm contemplating a skinomi carbon-fiber body skin to give it more grip, but I hate doing things like that. My only concession has been a screen protector (which I also never use). I think I just need to be more careful.
-R
That's how I saw my battery for the first time. Dropped it the second day I had it. Decided not to get a screen protector because the screen looked too nice. Face down and not a nick or scratch. Agree, this is one tough phone.
Dont know how you guys avoid scratches on your screens. My screen protector is covered in them! But then again... its probably is more sensitive than the screen.
To access the battery, we need to slide out the keyboard so the part that holds the screen up, uncovers the notch to take the cover off. Obviously it doesnt actually hold the cover in place. Must be purely an aesthetics thing.
Nice to hear they can take a beating though
Just had my close call today a little while ago; it was a two foot drop from my hand in a chair to the tile ground with it landing right on its face. Still a bit paranoid but looks like everything is fine on the exterior, but the cover flew off too. Right now trying to do everything I can think of to make sure the internal components are still in working order, particularly the mic and speakers.
ScottSUmmers said:
Just had my close call today a little while ago; it was a two foot drop from my hand in a chair to the tile ground with it landing right on its face. Still a bit paranoid but looks like everything is fine on the exterior, but the cover flew off too. Right now trying to do everything I can think of to make sure the internal components are still in working order, particularly the mic and speakers.
Click to expand...
Click to collapse
Frankly, the most fragile part (as far as impact damage goes) is the screen/casing. So if cosmetically it looks fine, it probably is fine.
Didnt you just see it going in slow motion the whole time? lol Glad you faired well.
I tossed mine off the desk (accidentally -- swept my arm while talking, caught the cord, phone came unplugged)
The slow-mo with the long too-deep-to-be me "nooooooooooooo" followed by the beautifully artsy smash into the wall. Battery cover and battery left their normal homes.
Reassembled, everything's fine. It's like the first scratch in a new car. Sucks, but it'll happen.
Hey everybody, got a new case review. This one is the infamous Nillkin Fresh, which is Nillkin's second generation of flip covers. To be honest, I got this case because it works with the iloome ScreenMate tempered glass protector I got, which didn't work with any of my other cases.
I got the yellow color, and it looks very nice. The flip has a darker yellow than the snap on part, which looks perfectly fine to me. The flip doesn't stay down for the first few days, and it doesn't have a lock mechanism. But, with a few days use, the flap does stay down on itself. Now, at first it wasn't working with my tempered glass protector, so I just kept stretching the fake leather out, and eventually it stays. I just clamped it so it stayed stretched. This is a very simple case, and if you don't drop your phone a lot (like me) this is a really nice case, it has a soft lining on the inside of the flip, almost like micro-fiber, and it helps keep fingerprints away. I do like this case, but it's not perfect. You can also use it as a stand, just fold it back and slide it into the slot. I absolutely HATE this feature, as the slot sticks out from the back of the case, so I can't use it with the Orb Charger. I forgot to take pictures of it, but it is REALLY annoying. Overall, aside from that one thing, it's a really nice case. :laugh:
Just to add on to OP, mine's the light blue one, a really sweet colour.
Has a microfiber (or whatever you call that) lining, prevents the screen from getting scratched.
The thickness. When paired with apps like Proximity AutoLock. you simply flip the cover and BAM, the phone locks itself. (Disclaimer: The app takes up quite a lot of battery though.)
Thickness again.
Thickness compared to a bumper. (if you haven't realized yet, I like blue )
The back plastic has got this pearly, glittery effect, too subtle to notice unless you're staring at it.
The front is a leathery kind of texture. Not real leather, of course.
It does destroy the edge swiping experience, with the exception the left hand side center (shown in the pic). May cause full screen SPs to bubble up too, but I have no idea, I don't use full screen ones.
How it looks. Mine has yet to become seasoned, so it'll topple if I don't support it. It has a hook that'll hook the front cover.
The headphone jack.
Those with a dbrand skin might want to take note, it kinda leaves a mark on the skin, but if you don't use the case for long enough, the mark'll go away.
I'd recommend it 8/10 overall as it makes it hard to use the phone using your left hand with the front flap, also, it makes my phone feel like a tank. But the front protection is great if you're not using a screen protector. But be careful of oil stains, they're almost impossible to remove from the inner lining. Washed it once, dried it and it feels like new again.
Edit, does anybody know how the hell do I resize the pictures? They're HUGE.
jiayit said:
Just to add on to OP, mine's the light blue one, a really sweet colour.
Has a microfiber (or whatever you call that) lining, prevents the screen from getting scratched.
The thickness. When paired with apps like Proximity AutoLock. you simply flip the cover and BAM, the phone locks itself. (Disclaimer: The app takes up quite a lot of battery though.)
Thickness again.
Thickness compared to a bumper. (if you haven't realized yet, I like blue )
The back plastic has got this pearly, glittery effect, too subtle to notice unless you're staring at it.
The front is a leathery kind of texture. Not real leather, of course.
It does destroy the edge swiping experience, with the exception the left hand side center (shown in the pic). May cause full screen SPs to bubble up too, but I have no idea, I don't use full screen ones.
How it looks. Mine has yet to become seasoned, so it'll topple if I don't support it. It has a hook that'll hook the front cover.
The headphone jack.
Those with a dbrand skin might want to take note, it kinda leaves a mark on the skin, but if you don't use the case for long enough, the mark'll go away.
I'd recommend it 8/10 overall as it makes it hard to use the phone using your left hand with the front flap, also, it makes my phone feel like a tank. But the front protection is great if you're not using a screen protector. But be careful of oil stains, they're almost impossible to remove from the inner lining. Washed it once, dried it and it feels like new again.
Edit, does anybody know how the hell do I resize the pictures? They're HUGE.
Click to expand...
Click to collapse
You could just use a photo editor and re-crop?
Sent from my Nexus 4, the only phone approved by Patrick Star
N4ever said:
You could just use a photo editor and re-crop?
Sent by a giant douche
Click to expand...
Click to collapse
While we're doling out advice, I recommend that you change the text you quote so everyone doesn't have a second column of gigantic images...
N4ever said:
You could just use a photo editor and re-crop?
Sent from my Nexus 4, the only phone approved by Patrick Star
Click to expand...
Click to collapse
You could have said that without quoting the images all over again....
I have this case too, just never got around to finish writing my review. Mine is mint green (though some product pictures may appear turquoise).
Having a front cover in addition to the case is definitely nice, as I can drop it into my bag without worrying about what is going to hit against the front screen. Also very handy when talking on the phone with the flap covering the screen.
It's not slim as a ringke slim but not thick either, and the phone looks nice in it. I liked that it didn't have an actual lock to keep the cover on because it was easier to flip open.
It's so annoying when your holding it open. No comfortable way to do it.
Sent from my Nexus 4, the only phone approved by Patrick Star
Are the buttons easy to press?
Sent from my Nexus 4 using Tapatalk 4 Beta
Tbh it's quite hard. And trying to take a screenshot with both buttons is a nightmare. But I don't take that many screenshots anyway and the power button is not really that hard to press, it's just that their opening hole for the power button is a tad too small.
jiayit said:
Tbh it's quite hard. And trying to take a screenshot with both buttons is a nightmare. But I don't take that many screenshots anyway and the power button is not really that hard to press, it's just that their opening hole for the power button is a tad too small.
Click to expand...
Click to collapse
I can see the volume rocker is exposed when you open the case. The power button looks a bit hard. In my current case(looks like the ringke slim) i had to cut off the bar at the top to gain easy access to power button.
Sent from my Nexus 4 using Tapatalk 4 Beta
The way everything folds is just uncomfortable.
Sent from my Nexus 4, the only phone approved by Patrick Star
I got this case last week, black one. The plastic base is super cheap, there are at least two defects and the frame around the power button is simply bent. Although my flip cover actually rests perfectly on the screen, the plastic part makes noises everytime a little pressure is applied to the sides.
Went straight to the litter bin, I'd rather use my phone naked than inside this thing.
Just my two cents.
Fabriciohss said:
I got this case last week, black one. The plastic base is super cheap, there are at least two defects and the frame around the power button is simply bent. Although my flip cover actually rests perfectly on the screen, the plastic part makes noises everytime a little pressure is applied to the sides.
Went straight to the litter bin, I'd rather use my phone naked than inside this thing.
Just my two cents.
Click to expand...
Click to collapse
Seems like you got a manufacturing defect.. Why didn't you ask for a refund?
Hung0702 said:
While we're doling out advice, I recommend that you change the text you quote so everyone doesn't have a second column of gigantic images...
Click to expand...
Click to collapse
Sent by a bigger douche who calls people out
Sent by an even bigger douche
Sent from my Nexus 4, the only phone approved by Patrick Star
Ever wanted to know what a Note 3 would like without the quasi chrome frame ?
It would look something like this...
I used wet and dry paper left over from my daughter sanding the bonnet of her car so I have no idea what grit it was. I simply took the battery cover off, I even left the battery in and the phone on as I was waiting for an important call.
The cheap screen protector has some great looking scratches on it. They weren't too deep so I've left it on until I can be bothered attempting to put on a new one.
Something to note, don't sand the buttons. I was doing this while having a cigarette outside and didn't realise I'd almost sanded the power button smooth (still works). I haven't got around to doing anything with the s pen yet, it's still quasi chrome with a chunk out of the end ... I will eventually post some extra pics when I have the time to use something with a finer grit and may even give it a coat of spray paint and clear coat (I'd have to remove the buttons first) It may be a month before I have the time to do this.
o0o.paw said:
Ever wanted to know what a Note 3 would like without the quasi chrome frame ?
It would look something like this...
I used wet and dry paper left over from my daughter sanding the bonnet of her car so I have no idea what grit it was. I simply took the battery cover off, I even left the battery in and the phone on as I was waiting for an important call.
The cheap screen protector has some great looking scratches on it. They weren't too deep so I've left it on until I can be bothered attempting to put on a new one.
Something to note, don't sand the buttons. I was doing this while having a cigarette outside and didn't realise I'd almost sanded the power button smooth (still works). I haven't got around to doing anything with the s pen yet, it's still quasi chrome with a chunk out of the end ... I will eventually post some extra pics when I have the time to use something with a finer grit and may even give it a coat of spray paint and clear coat (I'd have to remove the buttons first) It may be a month before I have the time to do this.
Click to expand...
Click to collapse
this looks nice :thumbup:
I'll try it too.
Sent from my SM-N9005 using XDA Free mobile app
I sanded the frame as there were about 6 spots where the chrome had been chipped off leaving just the black undercoat... there were also a few dents in the frame (and a spot near the s pen where it had taken a large chunk out of the corner).
You probably wouldn't want to do this if your Note 3 was in pristine condition, I was just sick of it looking so crap.
I did this to my Note 1 due to the ugly paint peel and now my Note 3 having the same problem. I applied some car wax for a shiny finish.
How long you sand until you reach a smooth finish since the Note 3 frame got some pattern on it.
My note 3 never leaves its Otterbox, so something like this would never even cross my mind. Plus, I think I'd be too afraid to take sandpaper to my phone lol.
Anyway, it looks pretty good from the pictures!
[emoji106]
Edit: I have tinkered with my S-Pen a bit, so let me give you some advice, in case you decide to: Be very careful with the button. It's very, very thin. The first time I took it apart, I thought I was being careful enough with it, and ended up breaking the button in half and had to order an entirely new S-Pen....
GeneralMeow said:
I did this to my Note 1 due to the ugly paint peel and now my Note 3 having the same problem. I applied some car wax for a shiny finish.
How long you sand until you reach a smooth finish since the Note 3 frame got some pattern on it.
Click to expand...
Click to collapse
You can sand it until the ribbed chrome is gone. I used a cork sanding block I had laying around (cost about $2 from the local hardware store) to make sure It was semi even.
When your phone is dropped as much as mine was you'll note that the when the chrome is chipped it will be black underneath. I kept sanding until it is smooth and the black coating was gone.
Working around the buttons is a bit difficult. You'll notice in the picture that I scratched up the volume button accidentally. I wasn't being really careful as I figured the phone couldn't look any worse.
I'll order some new buttons and a white camera lens then strip the phone down and spray paint it white with some clear coat when I get the chance. I have 18 days to find somewhere new for my kids and I to live Gotta figure that out first unfortunately.