GT-I58001 Going back to orignal ROM ASIA(INDIA) - Galaxy 3 Android Development

hi
this for the info for those in Asia(India) who want to go back to the original I5801DDJ6
after trying all the 2.2 roms available and not too happy i wanted to go back to the original so i went to the site www.samfirmware.com downloaded the above ROM flashed it with odin and then i went to the roll up thread and downloaded the orignal I5801 boot from here : http://forum.xda-developers.com/showthread.php?t=871249&highlight=bootscreen
and flashed it separately using ODIN i did this after flashing the above rom
and now i have the original rom and original Boot on my phone
everything looks ok Mac id ok IME also ok
hope this info helps
do a hard reset after flashing the above if the wifi is not working this will help
Thanks
hari

Oh ! very good , some times I need this one.

Related

Removing ClockWorkMod recovery

Hi guys, I need your help!
Yesterday I updated my phone from Froyo 2.2 to Gingerbread 2.3.5 with Kies, then I rooted it trough Odin and flashed the recovery with ClockWorkMod recovery (i followed the guide, and made everything it asked to do). I completed the task succesfully. But here comes the problems:
I turned the phone on and I wanted to use Wi-Fi connection but I couldn't! It was just saying "error" and in settings the MAC address was unavaiable. I found something on the web, like trying to dial *#*#526#*#* but it didn't work too ("Driving loading unsuccessful").
So I wanted to bring the phone back to the previous state, So i unrooted it (succesfully) but now I'm stuck with this ClockWorkMod recovery and I can't find a way to restore the original Samsung i9003 recovery because i can't find it anywhere and I don't even know if I can use another Samsung's one.
I tought that maybe reinstalling Gingerbread from zero could fix this problem, but I'm not even sure of that, neither on how to reinstall it. Damn, I'm truly an Android n00b
Thanks to everyone that will spend some time helping me!
If it can help, here some infos about my phone
I9003XXPN
Kernel Version: 2.6.35.7-CL482273 [email protected]#1
Version build: GINGERBREAD.XIKP2
Click to expand...
Click to collapse
marvin_kk said:
Hi guys, I need your help!
Yesterday I updated my phone from Froyo 2.2 to Gingerbread 2.3.5 with Kies, then I rooted it trough Odin and flashed the recovery with ClockWorkMod recovery (i followed the guide, and made everything it asked to do). I completed the task succesfully. But here comes the problems:
I turned the phone on and I wanted to use Wi-Fi connection but I couldn't! It was just saying "error" and in settings the MAC address was unavaiable. I found something on the web, like trying to dial *#*#526#*#* but it didn't work too ("Driving loading unsuccessful").
So I wanted to bring the phone back to the previous state, So i unrooted it (succesfully) but now I'm stuck with this ClockWorkMod recovery and I can't find a way to restore the original Samsung i9003 recovery because i can't find it anywhere and I don't even know if I can use another Samsung's one.
I tought that maybe reinstalling Gingerbread from zero could fix this problem, but I'm not even sure of that, neither on how to reinstall it. Damn, I'm truly an Android n00b
Thanks to everyone that will spend some time helping me!
If it can help, here some infos about my phone
Click to expand...
Click to collapse
Now, Do you want a guide on how to re-flash back to Gingerbread using ODIN? If so,It is here. And, I would like to tell you that on re-flashing the FW, you are going to void your warranty and you will be able to get rid of the CWM
Hope it helped you!
hi OP
I'm facing the same problem as you, right now waiting for dxkp9 download and reflash with Odin.
But if you somehow manage to solve this issue please share.
Hi!
I tried and I tried and I solved it! I flashed back the stock rom of I9003 with Gingerbread trough Odin. This removed ClockWorkMod and restored the phone as it was in the beginning. Problem solved, original recovery mode and wi-fi finally works!
marvin_kk said:
Hi!
I tried and I tried and I solved it! I flashed back the stock rom of I9003 with Gingerbread trough Odin. This removed ClockWorkMod and restored the phone as it was in the beginning. Problem solved, original recovery mode and wi-fi finally works!
Click to expand...
Click to collapse
+1 [Reflash, and CF-root without 'extras' and restore]

[Q] How to downgrade From ICS to Gingerbread?

I have a Nexus s with 4.0.3 flashed via bootloader.How can i downgrade to 2.3.x without root,cwm or debug(cause it isn't working) ?
i've tried several methods but none of them worked(Odin,Heimdall)
They all requires me to enter download mode with debug enabled.My debug mode is enabled but as far as i read on xda,the degub is not working in this version of ICS.
my question is : how can i downgrade to ANY firmware from this ICS version
P.S. Entering recovery mode is not an option...the phone simpli enters in a recovery/download mode - loop and keeps restarting.
Please respond fast.10x
The way I did it was to download Clockwork Mod app and scroll down to where it says stock... then 2.3.3. Once u flash that you'll lose root and an update to 2.3.x will be prompted to ya. If it doesn't then Google (Download) 2.3.4(x) and manually update. What model do u have btw?
- Google
You need to root is the basic moral here. Nothing else is really worth the effort of getting it done.
Hi
If the procedure for the nexus is the same as it is for the S2.
It should be straight forward.
Download your ROM, if its Orange you want here is a good link, I used it myself today:
http://androidromupdate.com/2012/02...-i9100p-firmware-updates-list-and-stock-roms/
The ROM I used was the NON WIPE type - I9100BVKJ4_I9100ORAKJ4_ORA
I include a picture of what I did.
I was initially on a custom ICS 4.0.3 XXLPH and have gone back to Orange stock rom.
Load the integrated Rom just into the PDA window - connect your phone in download mode and start, and that should be it!
Don't check re-partition or anything else.
Keep trying it will work.
I also had an initial prob whereby I installed the wrong kernel and the phone screen was messed up and seemed to be bricked and to get it back I loaded odin up.
Put phone in download mode.
Checked re-partition - unchecked 'auto reboot and f.reset'
Used a PIT (partition file)
Used a kernel file suitable for the S2 in the PDA window and pressed 'start'
This seems to have repartitioned and wiped the mistake and unbricked the phone.
This loaded and the phone booted - no messed screen.
Then I continued to accomplish the ROM switch over.
tsam19 said:
Hi
If the procedure for the nexus is the same as it is for the S2.
It should be straight forward.
Download your ROM, if its Orange you want here is a good link, I used it myself today:
http://androidromupdate.com/2012/02...-i9100p-firmware-updates-list-and-stock-roms/
The ROM I used was the NON WIPE type - I9100BVKJ4_I9100ORAKJ4_ORA
I include a picture of what I did.
I was initially on a custom ICS 4.0.3 XXLPH and have gone back to Orange stock rom.
Load the integrated Rom just into the PDA window - connect your phone in download mode and start, and that should be it!
Don't check re-partition or anything else.
Keep trying it will work.
I also had an initial prob whereby I installed the wrong kernel and the phone screen was messed up and seemed to be bricked and to get it back I loaded odin up.
Put phone in download mode.
Checked re-partition - unchecked 'auto reboot and f.reset'
Used a PIT (partition file)
Used a kernel file suitable for the S2 in the PDA window and pressed 'start'
This seems to have repartitioned and wiped the mistake and unbricked the phone.
This loaded and the phone booted - no messed screen.
Then I continued to accomplish the ROM switch over.
Click to expand...
Click to collapse
Don't do this. The method for the Nexus S is definitely NOT the same as the SGS2, or even the SGS. Although it may be possible to use Odin or Heimdall, it is not recommended. We already have enough freedom to do as we please.
I thought all android / samsung phones would follow the same procedure for flashing new roms or unbricking via Odin?
Kies is useless for updating as we all know.
So what other methods beside Odin or Heimdall can be used on the samsung nexus?
Cheers for clarifying though, I was only tying to be helpful
galaxy 2 ics to gingerbread
dear all
i am much upset that i upgrade my galaxy s2 to ics 4.0.3 , it is much laggy i want to downgrade it to gb 2.3.5 or 2.3.6 , can anybody help me to do this , with the all the steps and downloading links of the exact files , i tried alot many times and when it is done on odin with pass message , cell restarts and with error screen .
thanks in anitcipitation
Regards
Shoaib Hassan
i've just downgraded to 2.3.2 i used the rom wiper from bm and then simply flashed the oxygen rom over it
the only way and easily is odin.just go to downloading.make sure to download the correct modem ,baseband and needed files by cheking your nexus s version.ex.i9020t,i9023 .there are not the same version,and will use different modem,baseband ...
I also want to downgrade from ics to gingerbread too, by pure luck i managed to upgrade to ics (i'm completely new to this) but having had this on my phone for awhile, I want to return to gingerbread...
I'm currently grabbing kernel_I9100xwkj3 (couldnt find xwkj1 anywhere)
and
gt-i9100_o2i_i9100xwkj1_i9100o2ik11_i9100xxk14
to use with odin?
question is... is this all i need and is there anything i need to be aware of?
You need to make use of fastboot and flash the stock GB rom from factory images provided by google, then you can flash cwm and then flash any rom you want
it is because cwm can flash roms with android version up but not down means that you can flash 4.1 if u have 4.0.4 but if you are on 4.0.4 then you cannot flash 2.3.x
Hope it helps

[Q] Revert 6210 back to stock

Can someone help me to be sure my procedure is correct please....There are many different opinions and procedures on the Forum so I figured I would ask this question directly so I make sure I get it right.
I have a US gt-6210 that I flashed with ODIN to the UK ICS ROM (P6210XXLPL). Everything went well and I have been using it but I decided it is time to reset the tab. I have to unsolved issues with battery life and I want to start getting OS updates again....
A little while ago I tried flashing with the US ICS ROM but ended up in a bootloop so I just flashed back to the UK ROM.
I figure my best bet is to just do a factory reset and load either the factory original ROM or give the US ICS ROM another shot.
1) I want to avoid bricking my tab so what is the best way to reset to factory-I am on the Stock (UK) ICS recovery at this time
2) I don't have the original 3.2 image, is the Cellular South 3.2 (P6210UELA3) image from SamMobile the same or should I just use the Cellular South 4.0.4 ROM (P6210UELPC )
I am fine with using ODIN, I currently have the stock ICS Recovery and I am Rooted.
Thanks for help in advance....
kamishki said:
Can someone help me to be sure my procedure is correct please....There are many different opinions and procedures on the Forum so I figured I would ask this question directly so I make sure I get it right.
I have a US gt-6210 that I flashed with ODIN to the UK ICS ROM (P6210XXLPL). Everything went well and I have been using it but I decided it is time to reset the tab. I have to unsolved issues with battery life and I want to start getting OS updates again....
A little while ago I tried flashing with the US ICS ROM but ended up in a bootloop so I just flashed back to the UK ROM.
I figure my best bet is to just do a factory reset and load either the factory original ROM or give the US ICS ROM another shot.
1) I want to avoid bricking my tab so what is the best way to reset to factory-I am on the Stock (UK) ICS recovery at this time
2) I don't have the original 3.2 image, is the Cellular South 3.2 (P6210UELA3) image from SamMobile the same or should I just use the Cellular South 4.0.4 ROM (P6210UELPC )
I am fine with using ODIN, I currently have the stock ICS Recovery and I am Rooted.
Thanks for help in advance....
Click to expand...
Click to collapse
Follow my guide on pretty much anything firmware here:
http://forum.xda-developers.com/showthread.php?t=1777003

[Q] radio issues cannot make recive calls,txt,data phone on roaming mode

hi every one i dont know what to do now at this point i flashed my phone to the cyanogenmod 10.1 nightly which worked but the problem i started to have was could not send txt or calls but could browse the web on 4g so i though i would just restore from my back up of recovery image i did back to original stock which i noticed the proble still ocurred then i tried flashing to another rom called smooth liquid which now at this point it was only stuck on roaming my phone does seem to have the imei still in place, ive been reading aroud and did odin flash to stock touchwiz rom but still did not correct apparantly something messed up with the radio i went to the other forum were i woul dhave to flash the radio i tried the first one which was the lates one vrlk3 modem but when i tried to flash it in clockwork mod it gave me some error saying bad install so i attemted the one below that modem which is VRLK1 which flashed successfully but still did not seem to fix my service issue i read something about RPM on that same forum but there was many options to download i didnt know which one or if i even had to please help me someone. :crying:
Which build did you odin back to? Also did you do the reprovision code in the dialer? If not odin the F2 ICS build and put this in the dialer... *2767*3855#
x714x said:
Which build did you odin back to? Also did you do the reprovision code in the dialer? If not odin the F2 ICS build and put this in the dialer... *2767*3855#
Click to expand...
Click to collapse
the build or what it says here is COMBINATION_I535VRBLK3_I535VZWBLK3_381038_REV09_user_low_ship.tar which is the jelly bean official ota
Flash this with odin http://goo.im/devs/invisiblek/i535/HOME_I535VRALF2_I535VZWALF2_618049_REV09_user_low_ship.tar.md5 and then in the dialer put *2767*3855# that should fix you up. Then just odin back to the K3 JB release.
ok thanks lets hope this works im trying this right now lets see what happens would it matter if im currently rooted??
droidman89 said:
ok thanks lets hope this works im trying this right now lets see what happens would it matter if im currently rooted??
Click to expand...
Click to collapse
do i have to do any radio flashing in addition to this stock rom flash?
x714x said:
Flash this with odin http://goo.im/devs/invisiblek/i535/HOME_I535VRALF2_I535VZWALF2_618049_REV09_user_low_ship.tar.md5 and then in the dialer put *2767*3855# that should fix you up. Then just odin back to the K3 JB release.
Click to expand...
Click to collapse
Thanks a million man you saved my life it worked thanks again
Youre welcome!
It Worked
I just want to say this post saved me tonight. I had searched the forums and tried everything to get my phone operational after flashing Slim's 4.2.1 ROM; which I learned I should not have done ... too late. I was stuck on roaming and no matter what I tried nothing worked until I found this post.
Thank you so much for your help.

Samsung galaxys duos (gt-s7562): Soft brick (bootloop)

RECENTLY I STARTED HAVING BATTERY PROBLEMS WITH MY SAMSUNG GALAXY S DUOS
I LOOKED UP ON THE WEB AND SAW THAT CUSTOM ROOM'S MAY SOLVE MY PROBLEMS
I INSTALLED A CYANOGEN OS BUT STILL THE BATTERY PROBLEM PERSISTED
THEN I BOUGHT A NEW CHARGER
IT SEEMED THAT THE NEW CHARGER SOLVED MY PROBLEM
SO I DECIDED TO SWITCH BACK TO MY STOCK FIRMWARE
I THOUGHT THAT WHY NOT TRY STOCK FIRMWARE OF ANOTHER DEVICE
BUT BY DOING THIS I ENDED UP WITH THE-->>"FIRMWARE UPGRADE ENCOUNTERED AN ISSUE. PLEASE" ... BLAH... BLAH... BLAH
THEN I DOWNLOADED STOCK FIRMWARE FOR MY DEVICE ONLY AND FLASHED IT
IT GOT RUNNING
BUT AFTER A FEW DAYS I GOT BORED WITH THE LAGGY STOCK FIRMWARE
SO I SEARCHED XDA FOR ANOTHER CUSTOM ROM FOR GT-S7562
I DECIDED TO FLASH THE PMP LIGHT ROM ESPECIALLY MADE FOR GT-S7562
BUT AFTER FLASHING IT I HAD GSM CONNECTION PROBLEMS
SO BACK TO STOCK ROM AGAIN
BUT THIS TIME WHEN I FLASHED THE STOCK ROM IT GOT STUCK AT THE SAMSUNG LOGO
I COULDN'T GO INTO RECOVERY MODE THEN
SO I CORRUPTED THE DEVICE AGAIN AND INSTALLED THE STOCK FIRMWARE
BUT AGAIN BOOT LOOP NO BOOT SOUND AND NO RECOVERY
I TRIED MANY THREADS
I TRIED http://forum.xda-developers.com/showthread.php?t=2426426
I TRIED http://forum.xda-developers.com/s7562/general/troubleshoot-pit-file-baseband-files-t3246791
AND MORE AND MORE THAN THE NUMBER OF NERVE CELLS IN MY BODY
SO...
PLEASE ANY HELP WOULD BE APPRECIATED
I WROTE THIS WHOLE THREAD WHILE CRYING:crying::crying::crying:
hey download stock rom files alone ..... like pit and csc etc ....
and flsah them this will work
i'm very bad in english ...sorry :silly:
I have tried before but without success any way thanks i will try it once again
boy maztoul said:
hey download stock rom files alone ..... like pit and csc etc ....
and flsah them this will work
i'm very bad in english ...sorry :silly:
Click to expand...
Click to collapse
didn't work !!

Categories

Resources