I just bought this new car holder two weeks ago and I have to say it's awesome! I've had two car holders before this, one giant universal one that was ugly and broke really quick, and a SGS specific one bought off Ebay that scratched the backplate and was no good.
I saw this at a local store last week and decided to give it a try, it's a universal mount that holds using an adhesive pad, but the pad leaves no residue or stickyness on the phone it just holds the phone, and then when you pull it off it comes off. My phone has never fallen off and one time just for fun I tossed the phone at it lightly and it stuck, thats how sticky this thing is.
The best part is once it starts to lose its stickiness due to dust, skin etc you just rinse it out and start over again.
(I don't have any pictures right now but heres the website)
http://www.clingo.com/
bigc_13 said:
I just bought this new car holder two weeks ago and I have to say it's awesome! I've had two car holders before this, one giant universal one that was ugly and broke really quick, and a SGS specific one bought off Ebay that scratched the backplate and was no good.
I saw this at a local store last week and decided to give it a try, it's a universal mount that holds using an adhesive pad, but the pad leaves no residue or stickyness on the phone it just holds the phone, and then when you pull it off it comes off. My phone has never fallen off and one time just for fun I tossed the phone at it lightly and it stuck, thats how sticky this thing is.
The best part is once it starts to lose its stickiness due to dust, skin etc you just rinse it out and start over again.
(I don't have any pictures right now but heres the website)
http://www.clingo.com/
Click to expand...
Click to collapse
This is some pretty neat stuff!!!
Looks awesome.
Just bought one of eBay
I would like some more reviews for this it looks very interesting will it also hold with an invisibleshield attached to the back or is it slippy then? I don't want my phone to fall off while driving it could cause a lot of damage to my phone
webcrtor said:
I would like some more reviews for this it looks very interesting will it also hold with an invisibleshield attached to the back or is it slippy then? I don't want my phone to fall off while driving it could cause a lot of damage to my phone
Click to expand...
Click to collapse
+1
I'd like to know how sticky the sticky bit is as the roads over here are atrocious, I don't really want to have to fish the phone out from under the pedals while doing 100kmh
I like the idea of these but i don't think i'd ever trust it to hold the phone properly
I have seen a video of someone going over speed bumps and the phone stayed attached but i'd rather go for something that i know would be sturdy due to the holder. Just my opinion.
Got mine the other day.
Where I'm living at the moment there is road crew everywhere screwing with the roads. Potholes raised bits in the road. Suffice to say the roads are f'ing terrible.
And this thing will not let go if it at all. After driving around for about half an hour it was actually quite difficult to get my phone off the holder.
Driving around there is very little vibration in the phone, all the joints in the holder are very firm without being a ***** to use.
Overall im very impressed
As an extra test, I just went on a 600km road trip on Monday and it held my phone the entire time, I love this thing
For those who don't believe in Clingo I must say that it takes me two hands to take my SGS off of it. It is STICKY.
When you remove the phone off the holder does it make the back of the phone all weird and sticky?
And will it stick to a phone case? the case has a smooth and a bit of rubbery feel to it
I bought one of these also and found it to be very good.
You just have to watch out for the bump on the bottom of the SGS in positioning the phone during sticking.
I had one of these for a while but have now switched to a holder that my SGS just slots into.
It doesn't leave any residue on the back of the phone. It doesn't work too well with leather cases as it likes a nice smooth surface for maximum attachment and a word of warning, it can lose some of its 'strength' if the sun is baking your car all day. Even in England where we just get ****e weather, last summer mine dropped off a couple of times whilst driving which is why I ditched it.
And one final tip, get a retractable car charger because you can then 'set the slack' in the cable so that it does not pull on the phone. Curly cords can cause the phone to work itself loose as they always try and retract into their original shape. Plus retractable chargers are neater too.
I use the i9000 specific one from Ebay (dealextreme actually). I've hacked it a bit:
- shortened the bit that goes over the phone so it will push less hard
- removed some sharp edges that could scratch the phone
- removed the bendy bit and glued the phone holder and suction parts together at a near-right angle
and most important of all:
- stuck a PU anti slip mat under the suction cup and cut to size (a tad larger than the original suction cup). Now the suction cup also sticks to the dashboard
Those PU mats are like the Clingo backside I suppose. But a lot less expensive. The grip is very good (too good?) as I wanted to remove it from the phone and I was afraid to pull off the back cover. I'm happy I only stick it to the dash
TieNN89 said:
When you remove the phone off the holder does it make the back of the phone all weird and sticky?
And will it stick to a phone case? the case has a smooth and a bit of rubbery feel to it
Click to expand...
Click to collapse
I dont have a case on my phone so I can't comment on that part.
But it does not leave any sort of residue at all. comes of perfectly clean.
Quick update (hope this doesn't count as necro posting) The holder got dusty, started losing its grip, I rinsed it off and the next morning when it was dry it was as sticky as it was when I first started using the holder. Much more time down the road and this is still a great holder.
I'm interessed in it also, but...
The hole of speaker sound, is not covered by clingo??
Because when i'm using satnav/GPS apps i need to listen, but if clingo is above the hole the sound doesn't come out...
Can someone say something about this, please...
Sncrespo said:
I'm interessed in it also, but...
The hole of speaker sound, is not covered by clingo??
Because when i'm using satnav/GPS apps i need to listen, but if clingo is above the hole the sound doesn't come out...
Can someone say something about this, please...
Click to expand...
Click to collapse
All you would need to do is place it on the holder so that it isn't covering the speaker hole when you stick the phone to the clingo holder. You can stick it anywhere you want on the phone so it's only a matter of placement
Only caveat is that smooth/velvety materials don't stick well. My HTC EVO stock battery case doesn't stick for long, and the Seidio active innocase is too smooth to stick. Works great on a stock iPhone and my HTC Universal. Holds that one hard enough to pull the battery cover off!
My concern is will it rip off my invisible shield when I try to take it off the mount. I can see the adhesive pulling the film right off the back of my phone.
I've got this for my Samsung Galaxy S II, and it will almost *always* remove the battery cover due to its grip when trying to take the phone off. Good and bad
Related
I bought this on amazon for a tenner and had it delivered yesterday. even though it was advertised as a pouch specifically for the DHD, it doesnt quite work. for size its fine, but at the bottom theres a strap of leather which covers up the headphone and micro-usb socket. so if you're planning on using the DHD regularly to listen to music, you've been warned!
reelist said:
I bought this on amazon for a tenner and had it delivered yesterday. even though it was advertised as a pouch specifically for the DHD, it doesnt quite work. for size its fine, but at the bottom theres a strap of leather which covers up the headphone and micro-usb socket. so if you're planning on using the DHD regularly to listen to music, you've been warned!
Click to expand...
Click to collapse
Can't you put your phone in with the power button side going in first?
reelist said:
I bought this on amazon for a tenner and had it delivered yesterday. even though it was advertised as a pouch specifically for the DHD, it doesnt quite work. for size its fine, but at the bottom theres a strap of leather which covers up the headphone and micro-usb socket. so if you're planning on using the DHD regularly to listen to music, you've been warned!
Click to expand...
Click to collapse
i bought this case as well, and i think it is fantastic, if you need to charge or listen to music, just put it in the other way!
the only warning is how excellent the quality is for a tenner!
yeah i can, but i'm pretty sure i'd read either on amazon or HTCs accessory site that you can access the power button and headphone sockets through the case. nothing about one or the other! besides its just easier to have it inserted the 'right way' round as you can pull the phone out just a bit and turn it on to check the time, notification bar, etc. and even upside down you still cant hit the power button from the bottom of the case.
you're right though, it is a workaround, i was just a little disappointed as all they needed to do was put two smaller leather strips at the bottom instead of one big one blocking the sockets.
reelist said:
all they needed to do was put two smaller leather strips at the bottom instead of one big one blocking the sockets.
Click to expand...
Click to collapse
from being on this forum and seeing how ridiculously picky the people are here, they would have then complained it wasnt holding the bottom of the phone strongly enough and it would fall out!
lol! i dont think i'm being that picky though, am i? its like buying a tshirt with no sleeves. sure you can get it on, but it kinda defeats the purpose!
reelist said:
lol! i dont think i'm being that picky though, am i? its like buying a tshirt with no sleeves. sure you can get it on, but it kinda defeats the purpose!
Click to expand...
Click to collapse
its just, when i look around the forum, there seems to be some really silly things that have been made into mountains from molehills:
slight gaps above screen that you can barely see
slight gaps with the sim cover
people being too rough and breaking their sim cover
people want more led colours
etc etc
to be fair that sim card cover is flimsy cheap crap, and i dont want a flimsy cheap piece of crap attached to my £500 phone. if i wanted that i would have got a galaxy s.
but back on topic, why do you need access to the power buttom when its in the case anyway? and why can you not reach around the strap to touch the power button?
By the way one question
This pouch has a sleeve that is used to take out the DHD from the pouch it self.
When you put or take the pouch from your pants pocket, does the sleeve comes out accidentally ?
onesolo said:
By the way one question
This pouch has a sleeve that is used to take out the DHD from the pouch it self.
When you put or take the pouch from your pants pocket, does the sleeve comes out accidentally ?
Click to expand...
Click to collapse
this "sleeve" you refer to is just a piece of ribbon attached to the pouch which the phone rides on when you putt the ribbon and takes the phone out the case. No, it doesnt get pulled accidently when you take it our of your pocket
onesolo said:
By the way one question
This pouch has a sleeve that is used to take out the DHD from the pouch it self.
When you put or take the pouch from your pants pocket, does the sleeve comes out accidentally ?
Click to expand...
Click to collapse
nope. however if you want to be really really critical i would say the ribbon is around 1/4 inch too long and dangles loose when the phone is fully inserted. its one of those tiny things i notice but by no means a deal breaker.
rossysaurus said:
to be fair that sim card cover is flimsy cheap crap, and i dont want a flimsy cheap piece of crap attached to my £500 phone. if i wanted that i would have got a galaxy s.
but back on topic, why do you need access to the power buttom when its in the case anyway? and why can you not reach around the strap to touch the power button?
Click to expand...
Click to collapse
the strap at the bottom is too big and you cant see the power button at all, but thats not really going to help me. what i meant to say was, when i want to check the time for example, i dont want to pull the phone completely out of the case. so instead i can pull the ribbon, press the powerbutton, and check the time (along with checking for messages, missed calls, etc). but theres no way of doing that without taking the phone out completely if it is inserted upside down.
now, after writing all that i can see myself how ridiculously fussy i'm being! i do like the case, it does the job just fine and i dont feel the need to return it. (although i might try and drill a hole through the leather strap to slot in my headphones )
Any decent cobbler's / leatherworker's will have a drive punch which will make a much better job of modding your case. Offer them a couple of $localcurrency for the trouble, I'm sure you'll be happy with the result
I haven't seen any posts for DHD in regards to this and since this barnd is the most advertised and most positive-commented, I'd like to add my negative comments so that everyone is aware.
First of all, before I bought it, I've read the best comments about it as being the best choice. For me, it was the worst product I could buy and at such a high price which cannot be explained. This is why:
1) Hard to slide in and once in its place, the phone is so firmly fixed in the holder that you need tools to remove it. I always end up fighting with it to get out and the result is that always the sim cover gets off and stays fixed in the holder. The sides of the phone also start showing wear/scratch signs. This is the most unacceptable problem for a priduct of that price.
2) The provided proclip (special mount for specific car model) for one of my cars doesn't stay fixed on my car. It is so long and so thin and its corners are so badly aligned that even the adhesives don't come in contact with the console plastic and each time I try to take my phone off the holder, the whole mount comes off. With my other car for which the mount is smaller, it's ok bad still unacceptable for the price I paid overall.
Having read this, don't buy this product.
Thats a pity; I've been using a generic suction-cup mount in my car but was planning on purchasing a Brodit as I'd had no problems with the previous one I had for my Touch Pro 2.
I had a similar problem with the car mount half of it; it was supposed to mount over the air vent but would 'slip-off' if you hit a bump on the road. I fixed this with a heat gun, bending the mount to give it a firmer grip.
If the Brodit mount is a bad idea for the Desire HD, can anyone recommend a better option for the car than a clunky generic plastic lump I've got attached to my windscreen?
I bought a Brodit Active Holder for my DHD and I've had no problems fitting and removing the phone from it. If anything, when I slot the phone into place, there is a bit of a gap between the bottom of the phone and the holder so you can see part of the cable connector has not fully gone into the phone. Still charges though, just looks a bit irritating.
Other than that Im pleased with it, no fit or removal problems whatsoever
Reckless187 said:
I bought a Brodit Active Holder for my DHD and I've had no problems fitting and removing the phone from it. If anything, when I slot the phone into place, there is a bit of a gap between the bottom of the phone and the holder so you can see part of the cable connector has not fully gone into the phone. Still charges though, just looks a bit irritating.
Other than that Im pleased with it, no fit or removal problems whatsoever
Click to expand...
Click to collapse
Where have you bought it from? because I received a message today from the Swedish manufacturer who admit this as a problem with some of their stock.
andreasy said:
Where have you bought it from? because I received a message today from the Swedish manufacturer who admit this as a problem with some of their stock.
Click to expand...
Click to collapse
Sorry to hear that, you were unlucky. I bought mine off eBay Uk last week. It was a Uk seller called drivesafeandlegal2. I dont have enough posts to post a link unfortunately. I done a search under 'brodit desire hd'
Free delivery and package arrived in a couple of days.
For those who bought the Brodit carholder and its to tide ( like antenna cover gets stuck) you can solve it.
Take sandpaper with a very tiny grain and start sanding the edges of the sides. Make the sharp edges round and sand it with some water so that the surface and edges gets smooth ( even more smooth then original).
After this is done you don't see a difference in color or you don't mess up your holder as long the sandpaper is a P400 or lower and apply water in the end.
Mine looks like new and phone slides in without pushing until it reach the usb port.
No fuss with antenna cover and much more safe scratching your phone.
I purchased one of these to hold my phone and was sick of changing mounts every time i got a new phone.
http://www.exogear.com/products-exomount-car-mount-holder.html
Its basically a normal suction mount with a little bit of a sticky surface that does not come off on anything. The DHD fits fine and i haven’t had it fly off or wobble as i am driving or turning (and yes i turn sharp at high speeds).
This is probably (apart from a proclip) one of the best universal mounts i have used. The proclip is my choice as its solid and fixed but requires work, this on the other hand is my second choice as i can stick it anywhere in my car and have it suck down without leaving a mark and not have to mess around changing clips.
Features:
•Exomount’s patented suction technology enables you to mount on almost any flat surface such as car dashes, glass, wood, metal,
plastics and even drywall!
•Polyurethane lined grip keeps your phone or GPS safe and secure
•Quickly and easily mount and unmount your phone or GPS with our stylish clip grip holder
•Mounts all smart phones and GPS devices up to 5-inch screens
•Multi-angle rotation for your preferred viewing angle
cheers for the thread
does anyone use this with an otterbox (or similar) case? I'm thinking of buying one of these as there is zero options available for a DHD with a case
also any issues with the patented stick technology or whatever its called becoming not so grippy after x weeks/months?
Try slipgrip mounts for otterbox cases. You can find it on ebay also.
pappas99 said:
cheers for the thread
does anyone use this with an otterbox (or similar) case? I'm thinking of buying one of these as there is zero options available for a DHD with a case
also any issues with the patented stick technology or whatever its called becoming not so grippy after x weeks/months?
Click to expand...
Click to collapse
Non mine is still sticky now, i don’t think it is supposed to be super sticky as the gel and stick i think improves the suction. I just purchased another because they are pretty good and it doesnt need to be on a flat surface to work at all.
I've read that vibration might be an issue... we have very bumpy roads where I'm at so I wouldn't like it to be all over the place...
Any further info about this please?
BuZzCoRe said:
I've read that vibration might be an issue... we have very bumpy roads where I'm at so I wouldn't like it to be all over the place...
Any further info about this please?
Click to expand...
Click to collapse
I think there is a video review which says this but i have tried this on a Samsung Galaxy S2, Iphone4,Desire HD and Sensation and it is perfectly fine on bumpy roads. The clamp is strong enough to hold it. You will get the same jigger on say a tomtom or any other mount.
The reason why the clamp is the size it is, so when holding onto phones it doesnt press any buttons on the side of the phone.
Quality isnt that bad for its price and i would think its the best universal mount i have used in a car, i have used many mounts but this one has lasted the longest and seems very promising.
You can even rotate it and mount a tablet in your car!
I have ordered mine from eBay.. will post report as soon as I receive the delivery...
Sent from my Desire HD
I'm a new user of it too, and love it !
Question for you:
Since my dash is not completely straight so I can't put it there (even so it lasts about 1 day), I'm putting it on the windshield, but the arm is so short that I can't find a good place for it.
I put it meanwhile just a lil bit below the mirror, but on a way that the top of the phone is kinda behind the mirror, otherwise its too far and too hard to reach it.
I tried many other places but none was good enough.
Its or too far or blocking the road.. :\
Where do you put it? and where do you suggest me to put?
Thanks,
Yarden.
what a piece of junk! i tried it last night and couldn't find ANY spots in my car (newish 2004) where it would stick! I haven't tried the windshield yet. It literally would stay in place a few seconds then fall. did anyone else get this? perghaps i installed it wrong. is it just a case of taking the white ring protector off the stick part then putting on a surface? or did i not do something?
I wonder how safe this would be if mounted on dash and you break suddenly.
pappas99 said:
cheers for the thread
does anyone use this with an otterbox (or similar) case? I'm thinking of buying one of these as there is zero options available for a DHD with a case
Click to expand...
Click to collapse
Try Herbert Richter universal mounts if you're still after an option to use with otterbox case.
I've had mine for several weeks now.
It sticks everywhere.
I use mine with a Otterbox Commuter Case and it fits well.
Vibration is a small issue, though.
the Herbert Richter universal mounts is bulky with the arm, the exo gear mount is good btu if the clamp had a few extras to secure it better it would be 10/10
A|ex said:
I purchased one of these to hold my phone and was sick of changing mounts every time i got a new phone.
http://www.exogear.com/products-exomount-car-mount-holder.html
Its basically a normal suction mount with a little bit of a sticky surface that does not come off on anything. The DHD fits fine and i haven’t had it fly off or wobble as i am driving or turning (and yes i turn sharp at high speeds).
This is probably (apart from a proclip) one of the best universal mounts i have used. The proclip is my choice as its solid and fixed but requires work, this on the other hand is my second choice as i can stick it anywhere in my car and have it suck down without leaving a mark and not have to mess around changing clips.
Features:
•Exomount’s patented suction technology enables you to mount on almost any flat surface such as car dashes, glass, wood, metal,
plastics and even drywall!
•Polyurethane lined grip keeps your phone or GPS safe and secure
•Quickly and easily mount and unmount your phone or GPS with our stylish clip grip holder
•Mounts all smart phones and GPS devices up to 5-inch screens
•Multi-angle rotation for your preferred viewing angle
Click to expand...
Click to collapse
Alex, Mind to share what is the quality like?
pappas99 said:
what a piece of junk! i tried it last night and couldn't find ANY spots in my car (newish 2004) where it would stick! I haven't tried the windshield yet. It literally would stay in place a few seconds then fall. did anyone else get this? perghaps i installed it wrong. is it just a case of taking the white ring protector off the stick part then putting on a surface? or did i not do something?
Click to expand...
Click to collapse
yes. take the white protector bit off, its that sticky bit that helps it stay stuck to the surface, im surprised the suction bit worked at all with that thing still on lol
---------- Post added at 05:25 PM ---------- Previous post was at 05:22 PM ----------
zane222 said:
Alex, Mind to share what is the quality like?
Click to expand...
Click to collapse
The quality feels like it is kinda flimsy, but after using it, it feels tough.. i used to be kinda careful with it but these days i just grab and twist it and it definitely doesn't feel like it's gonna fall apart.
The ball bit that it rotates on did get a bit dirty on mine and it got quite hard to rotate it, but just clean the bit of it you can see (no need to take apart) and then it should be all good again. That's only happened once to me, and i literally just wiped with a dry finger and wiggled it about a bit and its fine again.
I was JUUUUST about to buy one, but because I live in Australia, shipping + handling is $49 alone!
Does anyone recommend any other mounts, without the massive shipping charge?
Apart from ebay cheapies.
jaysinclair said:
I was JUUUUST about to buy one, but because I live in Australia, shipping + handling is $49 alone!
Does anyone recommend any other mounts, without the massive shipping charge?
Apart from ebay cheapies.
Click to expand...
Click to collapse
I do not mind if you send me cash paypal etc to handle the purchase and shipping for you? If you like i can weigh the actual device (without packaging) which will make it cheaper and price up on royalmail web site air mail signed for etc?
Got one of those
I got the exogear holder about a month ago, and i can recommend it to anyone.
Sticks nice to many surfaces, the phone is not slipping down, can be used with a phone of any size (or a gps device)
The only down side is that you have to use both hands to place your phone into the holder.
so it holds the note fine ?
Ultimately I settled on the trident case, pictures in this post. Thanks to gtny930 for finding it for us.
There are some other good case recommendations scattered through the thread, as I get the time I will source them up here for easier reference.
--------
Hey all, i've been searching amazon off and on for cases for our wonderful device, and finally pulled the trigger on one:
Link here
Says it's by HTC, and I ordered from BlueMall, at $0.32 I couldn't not get it...
Rubberized case, two pieces to fit the slide function, looks like a winner.
I doubt it'll be as good as an otterbox as far as protection, but a buddy of mine has an otterbox for his Inspire 4G - and suffers from serious overheating problems. Since our phone already suffers from that with the stock battery i'm gonna pass otterbox by on this phone. (Anker 1900 battery solved overheating problems for me)
Anyways, at less then $3.50 shipped, seemed like a fantastic deal.
Meantime, I have a screen protector and bodyglove on it now, which seems to be a good temporary fix until some proper protection was available. Love the glove, but to me it's only a temporary solution.
What're the rest of you doing for a case or protection for your phone? I'd love to hear about it.
ArmorSuit and HTC Messenger
I got this:
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-T-Mobile-REPLACEMENTS/dp/B0058XMYDU/ref=sr_1_3?s=wireless&ie=UTF8&qid=1314661800&sr=1-3
I posted "customer pics" of what is looks like on my phone too at Amazon.
I'm coming from the G1 and was used to the G1 sleeve so I also bought this:
http://www.amazon.com/HTC-Messenger-Pouch-HD2/dp/B003DZ13OG/ref=sr_1_1?s=wireless&ie=UTF8&qid=1314661896&sr=1-1
It's a nice fit and doesn't stick out the top.
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Found this on Ebay. Still waiting for it (and MT4GS) to come. =[
I'm not allowed to post links yet so just put a dot in between.
http://www ebay.com/itm/HTC-MYTOUCH-4G-SLIDE-Hard-Cover-Case-SUMMER-FLOWER-/220839183408?pt=PDA_Accessories&hash=item336b0a8430#ht_2773wt_673
Lily.
MT4GS Cases / Shells
The rubberized hard Body Glove shells offered by T-Mobile (and sold on Amazon, eBay, etc...) are bulky and are missing holes for the microphone above the camera lens. I ended up buying the full body Invisible Shield and it looks great. The only problem is that they didn't include a piece for the bottom front of the phone (under the buttons and around the touchpad). I can put a hard case over the shield if I want, for extra protection or to just change up the look.
I have the solid black case. Just some things to note. First, the back piece is very tight, and I don't think it will ever fall off. However, when removing and replacing the cover, the clips can easily scratch your phone. Second, one or two clips may not actually "clip" to the phone, but rather just get stuck near the top so it still holds from pressure. This really isn't noticeable, but it leaves indents from the pressure on the phone's case. In addition, the clips scrape up against the backside of the screen when sliding up the phone, and over time, start leaving a very noticeable mark. I corrected this with a just a strip of tape over where it was scraping.
The protector for the sliding part of the phone was a bit of an issue. It clips very tightly to the phone, but the clips scrape a lot against the edges of the phone next to the keyboard. In addition to making it a little more difficult to slide the phone, it leads to wear overtime (noticeable wear actually started in less than a few hours of normal use for me). I corrected this by actually cutting off the clips, and using double sided adhesive to stick that part of the case on. It doesn't scrape anymore, but at the same time, it just doesn't look good as the case doesn't properly hold together.
I don't really see how much of this can be fully fixed. I used to own a G1, and I didn't notice the issue of cases scratching the phone until it was too late, but I was able to notice it on my MyTouch. I'm hesitant to go for the BodyGuardz. I had one on my G1, and though it was nearly invisible protection, and protected 95% of the phone, I ended up dropping my phone and it landed on a sharp rock on part of the 5% that happened to not be covered (which ironically actually are the corners of the phone, where it is very likely to land on).
I'm actually a fan of the body glove case. I'm just waiting for something with more clearance because of the anker battery. I've heard goods things about the otterbox, but it is kinda bulky.
Sent from my MyTouch 4G Slide
SolemnWishing said:
I have the solid black case. Just some things to note. First, the back piece is very tight, and I don't think it will ever fall off. However, when removing and replacing the cover, the clips can easily scratch your phone. Second, one or two clips may not actually "clip" to the phone, but rather just get stuck near the top so it still holds from pressure. This really isn't noticeable, but it leaves indents from the pressure on the phone's case. In addition, the clips scrape up against the backside of the screen when sliding up the phone, and over time, start leaving a very noticeable mark. I corrected this with a just a strip of tape over where it was scraping.
The protector for the sliding part of the phone was a bit of an issue. It clips very tightly to the phone, but the clips scrape a lot against the edges of the phone next to the keyboard. In addition to making it a little more difficult to slide the phone, it leads to wear overtime (noticeable wear actually started in less than a few hours of normal use for me). I corrected this by actually cutting off the clips, and using double sided adhesive to stick that part of the case on. It doesn't scrape anymore, but at the same time, it just doesn't look good as the case doesn't properly hold together.
I don't really see how much of this can be fully fixed. I used to own a G1, and I didn't notice the issue of cases scratching the phone until it was too late, but I was able to notice it on my MyTouch. I'm hesitant to go for the BodyGuardz. I had one on my G1, and though it was nearly invisible protection, and protected 95% of the phone, I ended up dropping my phone and it landed on a sharp rock on part of the 5% that happened to not be covered (which ironically actually are the corners of the phone, where it is very likely to land on).
Click to expand...
Click to collapse
I was going to edit in my response about the case I got in the first post - but after this one I quoted I need say not much more.
I really want to like the case, it feels nice and looks good on the phone...but it makes it too much of a pain in the ... to get the back of the case off.
I didn't realize how often I pop the back of the phone open to swap out memory cards until I put the case on.
It lasted on my phone for about 3 hours before I took it off...and it scratched one corner of my phone when I did it. Scratch isn't bad, and it'll probably buff out over time, but it's the first damage the phone has suffered - ironically from the thing that was supposed to prevent this.
If you are never going to pop open the back of the phone to get to the memory card, and you don't mind the backside of your screen-half of the phone getting scratched up when you slide it open - then this is a pretty decent case.
I think the scratching the back of the screen part can be solved by using a knife to cut a sliver off the part that sticks op, then maybe using a small piece of electrical tape to cover that clip.
I like it, I want to like it, but I can't use it - I take the phone apart too damn much for a case like this to be practical.
I'm on the lookout for a gel-type case now. Think that'll be the perfect solution. If anyone finds one, please mention it here.
I got the black cheap case today. After reading the reviews I knew better than to just throw it on there. So I took a small metal file that I have, and proceeded to shave each clip down just a little. After a few trials I got the clips shaved down enough that they all fit and are not pressing against the bottom of the screen hard enough to scratch it.
The coating on this case was not really rubber. Its more of a dusted flat black. It's not slick to the touch, but it doesnt grip like the rubber of the phone.
The phone still fits into the generic style T-mobile mount. But its not as secure as without. I can turn it upside down and give it a light shake without coming loose. So hopefully it will be fine.
I got my psychedelic cover and I'm not very impressed with it. It makes the phone very bulky and awkward to hold (maybe because of my small girly hands -_-).
I find taking the back cover off particularly stressful because I'm scared I'd rip the screen off the keyboard.
Protection wise I haven't dropped my phone yet to see what kind it would provide but I'm guessing it wouldn't fall off the phone if dropped.
Haven't seen any dents or scratches caused by it.
I think I'd prefer it if it had a more rubbery feel as the texture is kind of smooth and slippery.
Overall, I'm satisfied with it but I wish I could figure out a way to take off the cover without the fear of destroying it. Haha.
Lily.
@siani_8
I got this: ....
.....
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Quick question - in the pictures you uploaded to Amazon the phone back and sides seem to have a checker pattern. Is that pattern due to the protector?
The otterbox exists for this phone? Or you speaking generally about the otterbox product line?
Sent from my MyTouch 4G Slide using xda premium
ssb33 said:
@siani_8
I got this: ....
.....
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Quick question - in the pictures you uploaded to Amazon the phone back and sides seem to have a checker pattern. Is that pattern due to the protector?
Click to expand...
Click to collapse
Yes, it's a woven "carbon fiber" pattern. I took the pictures at angles where the light shows it more clearly. I think it looks nice and provides a "non-slip" surface as well without adding any bulk to the phone when you want to use it, which I personally prefer.
siani_8 said:
I got this:
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-T-Mobile-REPLACEMENTS/dp/B0058XMYDU/ref=sr_1_3?s=wireless&ie=UTF8&qid=1314661800&sr=1-3
I posted "customer pics" of what is looks like on my phone too at Amazon.
I'm coming from the G1 and was used to the G1 sleeve so I also bought this:
http://www.amazon.com/HTC-Messenger-Pouch-HD2/dp/B003DZ13OG/ref=sr_1_1?s=wireless&ie=UTF8&qid=1314661896&sr=1-1
It's a nice fit and doesn't stick out the top.
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Click to expand...
Click to collapse
Thanks for linking this and posting the pics on Amazon., I'm going to order one today.
Thanks. I ordered one and installed it yesterday. The front and back went on great. I had more trouble with the sides but that is because I am not the most deft person around. There are a lot long thin pieces but MT4GS has a lot of moving parts. The phone looks great from the front. But the back has a bubble or two - again my clumsiness.
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
http://www.amazon.com/gp/product/B005H98VI2
_atlien_ said:
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
http://www.amazon.com/gp/product/B005H98VI2
Click to expand...
Click to collapse
That's about the same thing I got that I posted about before - just mine is in black.
I know I said a few posts back that I wasn't going to use it, but I had to do something to try to keep it safe.
I've been using it for a few days now, and while I have my gripes, I suppose it's okay.
I got tired of not being able to put it down anywhere, for fear of scratching the camera lens. This case sits further down then the lens, so it isn't the thing the weight of the phone rests on.
Before, i'd have to find something soft to put it down on everywhere I went, which was annoying. I wouldn't put it in my pocket, because they are always full of dust and whatnot - that little grainy stuff gets into the phone and I didn't want that.
Now, with the case on, it doesn't fit in my belt holster anymore - so I have to put it in my pocket or carry it. Desperately seeking another solution but coming up short.
What i'm thinking about doing is drilling some holes in the back of the case, and attaching a belt clip to the hard case shell itself.
So now i'm looking for either a belt holster or a clip I can attach to the hard case itself. Whatever ends up happening, i'll get some pictures and put 'em up here.
What I really, really, really, really want is a soft-rubber case, like a gel case of some sort that can absorb shock - not some hard plastic thing.
_atlien_ said:
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
Click to expand...
Click to collapse
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
cOvertKEEN said:
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
Click to expand...
Click to collapse
No, it's fine. I've dropped the phone twice and the case hasn't come off. And it certainly isn't about to come off from handling/usage of the phone. It fits snug. Supposedly its made by HTC, if that means anything. The case does it's job without problems.
Just waitin for Otter.....
Any body have a silicone case? Or one of these?
http://www.ebay.com/itm/HTC-MYTOUCH...Accessories&hash=item231421d01f#ht_1896wt_922
Looks good. Other colors available too.
cOvertKEEN said:
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
Click to expand...
Click to collapse
_atlien_ said:
No, it's fine. I've dropped the phone twice and the case hasn't come off. And it certainly isn't about to come off from handling/usage of the phone. It fits snug. Supposedly its made by HTC, if that means anything. The case does it's job without problems.
Just waitin for Otter.....
Click to expand...
Click to collapse
It fits snug, coming off accidentally isn't a problem. Both the top piece and the bottom piece are secure, normal - or even some exaggerated abnormal - use won't knock it off.
The longer I use the case the more it grows on me, I really like the silky feel of it. There have been a few situations already where having a case protected the phone - I haven't dropped it and hope I never do, but since it's becoming a portable video game system/controller amongst other things it can't be without one.
I suppose you could do far worse then this case, but i'd trade it for a gel-type rubber case in a heartbeat. Hard cases don't protect from shock damage.
I have the Nexus 4 with the bumper case and It wont fit my current phone mount from my LG G2X. I need a mount that can do around 5 incs of phone.
maybe a samsung note will do???
platinumxo said:
maybe a samsung note will do???
Click to expand...
Click to collapse
? I need something that will hold the phone where I can see it for GPS and music selection while I'm driving.
A lot of people think I'm crazy for sticking something on my phone but I seriously LOVE this thing I bought ( http://www.steelie.com/)
So you pretty much put tiny dongle on the back of your phone, which sticks due to a strong adhesive and that dongle has a magnet that attaches to a ball you can stick on your car too.
I've had for awhile on my SGSII and when I removed it, it came off with no sticky residue or anything! Once I get a back screen protector for my nexus 4 I'm sticking it on there as well.
Here's a picture of my car with the car ball. http://www.flickr.com/photos/[email protected]/8111732688/in/pool-steelie
and here's another http://www.flickr.com/photos/[email protected]/8111732114/in/pool-steelie/
It's awesome because I literally walk in my car, scan the NFC sticker and stick it on the ball. SNAP on. It's adjustable since its a ball you can move it around.
The only downside was the price. It's a bit expensive but seriously, I cannot have chosen a better product.
I feel like I'm an advert for them but seriously. It's awesome. Watch their youtube video! They started from kickstarter too (random tidbit)
Two downsides .. price and this thing on the back of your phone.
darkamikaze said:
A lot of people think I'm crazy for sticking something on my phone but I seriously LOVE this thing I bought ( http://www.steelie.com/)
So you pretty much put tiny dongle on the back of your phone, which sticks due to a strong adhesive and that dongle has a magnet that attaches to a ball you can stick on your car too.
I've had for awhile on my SGSII and when I removed it, it came off with no sticky residue or anything! Once I get a back screen protector for my nexus 4 I'm sticking it on there as well.
Here's a picture of my car with the car ball. http://www.flickr.com/photos/[email protected]/8111732688/in/pool-steelie
and here's another http://www.flickr.com/photos/[email protected]/8111732114/in/pool-steelie/
It's awesome because I literally walk in my car, scan the NFC sticker and stick it on the ball. SNAP on. It's adjustable since its a ball you can move it around.
The only downside was the price. It's a bit expensive but seriously, I cannot have chosen a better product.
I feel like I'm an advert for them but seriously. It's awesome. Watch their youtube video! They started from kickstarter too (random tidbit)
Click to expand...
Click to collapse
I like it on the back of my phone lol doesn't add bulk at all IMO.
Not to mention it makes me want to check everything in my household if they are metal so I can stick it on it
darkamikaze said:
I like it on the back of my phone lol doesn't add bulk at all IMO.
Not to mention it makes me want to check everything in my household if they are metal so I can stick it on it
Click to expand...
Click to collapse
Have you thought about attaching that magnet to the back of a case and placing the nfc tag inside where the back of the phone would be?
It would be a good way to keep the back of the phone clean and still have a way to attach it to your car.
Steelie looks really cool, but it's quite pricey for what it is. I'd mount the phone ring on a case rather than right on the back.
tizio13 said:
Have you thought about attaching that magnet to the back of a case and placing the nfc tag inside where the back of the phone would be?
It would be a good way to keep the back of the phone clean and still have a way to attach it to your car.
Click to expand...
Click to collapse
That's how I had it on my SGSII, attached it to a TPU case. It worked pretty good too but the back is so nice on the nexus4 that I didn't want to cover it entirely so I was gunning for a bumper+backscreen protector.
Either way the phone attachment comes off readily with no residue issue when it comes to it
DimeShake said:
Steelie looks really cool, but it's quite pricey for what it is. I'd mount the phone ring on a case rather than right on the back.
Click to expand...
Click to collapse
It is X_x that's the only down side. If you're pro you can semi build one your own! lol just need a strong magnet and a ball to attach on your car.
darkamikaze said:
That's how I had it on my SGSII, attached it to a TPU case. It worked pretty good too but the back is so nice on the nexus4 that I didn't want to cover it entirely so I was gunning for a bumper+backscreen protector.
Either way the phone attachment comes off readily with no residue issue when it comes to it
It is X_x that's the only down side. If you're pro you can semi build one your own! lol just need a strong magnet and a ball to attach on your car.
Click to expand...
Click to collapse
yea. i almost bought the car kit cuz i thought 35 bucks wasn't too bad. but 12 shipping is no bueno o.0
darkamikaze said:
That's how I had it on my SGSII, attached it to a TPU case. It worked pretty good too but the back is so nice on the nexus4 that I didn't want to cover it entirely so I was gunning for a bumper+backscreen protector.
Either way the phone attachment comes off readily with no residue issue when it comes to it
It is X_x that's the only down side. If you're pro you can semi build one your own! lol just need a strong magnet and a ball to attach on your car.
Click to expand...
Click to collapse
thanks! bought one. this is exactly what i was looking for!
http://www.rammount.com/NewProducts/RAMxgripmount/tabid/4515/Default.aspx
Works like a champ.
I pray someone creates an inductive charging car stand/holder for us.
if there's anyone else looking to buy the steelie, the shipping is only $5 on amazon.
http://www.amazon.com/gp/product/B005O5WSTW/ref=ox_sc_act_title_1?ie=UTF8&smid=A3M3L1LVMVCRB5
http://www.amazon.com/gp/product/B007FHX9OK/ref=ox_sc_act_title_2?ie=UTF8&smid=A2FE6D62A4WM6Q
Two that I found. I'll be purchasing one of them and trying it out soon. Says its fits the Optimus G which is essentially what this phone is.
Neo42 said:
I pray someone creates an inductive charging car stand/holder for us.
Click to expand...
Click to collapse
Yes, this exactly. I want an inductive charging mount.
The steelie looks interesting, but would probably render the induction charging useless. I wonder if the large magnet on the back would fight with the induction current from the charger base?
darkamikaze said:
A lot of people think I'm crazy for sticking something on my phone but I seriously LOVE this thing I bought ( http://www.steelie.com/)
So you pretty much put tiny dongle on the back of your phone, which sticks due to a strong adhesive and that dongle has a magnet that attaches to a ball you can stick on your car too.
I've had for awhile on my SGSII and when I removed it, it came off with no sticky residue or anything! Once I get a back screen protector for my nexus 4 I'm sticking it on there as well.
Here's a picture of my car with the car ball. http://www.flickr.com/photos/[email protected]/8111732688/in/pool-steelie
and here's another http://www.flickr.com/photos/[email protected]/8111732114/in/pool-steelie/
It's awesome because I literally walk in my car, scan the NFC sticker and stick it on the ball. SNAP on. It's adjustable since its a ball you can move it around.
The only downside was the price. It's a bit expensive but seriously, I cannot have chosen a better product.
I feel like I'm an advert for them but seriously. It's awesome. Watch their youtube video! They started from kickstarter too (random tidbit)
Click to expand...
Click to collapse
just wondering if the phone socket is reusable.
WIIWONWON said:
just wondering if the phone socket is reusable.
Click to expand...
Click to collapse
It is. I just sold my SGSII and phone socket is sitting on my desk until I apply it on my Nexus 4. They give you lifetime replacements for the sticky part that goes on the back of the phone socket, so I had them send me a new one for free.
All I need is my back screen protector and my bumper until I apply it back on
I'm using an Arkon MG114. It was cheap and does the trick. I miss my GSII t989 car dock. I don't have the bumper on my phone yet, though I think it would work.