Database Info

Best Guide!!!! How to Root and Install roms and GOT 2.2.1 AND ALOT MORE!

Hi All, This is an All-in-one thread with available roms (for both Eclair and GOT 2.2.1 leak), how to root + apply roms for GOT 2.2.1 Leak, petitions, projects, etc. Please read everything carefully and good luck
(SCROLL DOWN FOR LIST OF ROMS, PETITIONS, ETC!)
Disclaimer: I am not responsible if anything happens to your device. Please read the whole text over before applying roms. Use at your own risk.
It is strongly recommended that you wipe data + cache + dlavik (may not be spelled right) cache before applying ANY roms.
Also, make sure to have vulnerable recovery and root installed (I do not think you need vulnerable recovery for 2.1 BUT ROOT IS NEEDED) However it is acquired, root is needed.
Also, MAKE SURE YOU NANDROID BACKUP BEFORE YOU DO ANYTHING TO YOUR DEVICE!!! GOOD LUCK
How-To Root (On GOT 2.2.1) (All the files were taken straight from the GOT homepage)
Note: Please, make sure your device is fully charged before you attempt to do this!
The following files all have vulnerable recovery pre-installed:
DACH – GERMANY :
http://www.multiupload.com/G9PP7JN78C
DACH AUSTRIA :
http://www.multiupload.com/P8DDXCWW03
RETAIL EUROPE (RTEU) :
http://www.multiupload.com/6X7H39HGCG
FRANCE RETAIL :
http://www.multiupload.com/PK28LXE4SE
ITALY WIND :
http://www.multiupload.com/3KYMZNRZW2
UK RETAIL (RTUK) :
http://www.multiupload.com/60B78PRKNY
TELUS CANADA :
http://www.multiupload.com/5S2CYGP3VW
Download the file according to where you live.
Now, you must install RSD Lite (taken from http://tinyurl.com/3xg5xwj):
http://www.megaupload.com/?d=N1MPCX1U
mirror: http://www.multiupload.com/jw25luksh2 (not tested by me, found from here: http://forum.xda-developers.com/showthread.php?t=983516 thanks nagi603 and eXtink please report in comments if it works!)
I'm pretty sure you may have to install the drivers for your device, a simple google may help. - This may be required.
Next, open RSD Lite and click the "..." and navigate to the file you have downloaded above.
Next, plug in your phone in bootloader mode. To do this, turn your phone off, then hold the power button, the top volume button and the camera button at the same time. Then you should enter bootloader mode. It should say Bootloader at the top. Make sure, at the bottom it says "Battery OK". Please, make sure you have fully charged your device! Then click the start button. Wait for a while.
Once its booted, plug the device into your computer via usb, then go to memory card access. Then go to the root of the sd card (on your computer)
Now, download and OR (For this tutorial, I will be using Androidani 3.3, the link is a the bottom).
In the rar file there should be two things. One should be a folder named "OpenRecovery" (Note: Make sure thats the file name!) and an update.zip file. Next, put the OpenRecovery folder in the root of your sd card. (If you have never used an OR before, you should NOT have to replace anything!) Also put the update.zip in the root of your sd card.
Next, turn the phone off. Now, while turning your phone on, (THIS MAY NOT WORK FOR SOME PEOPLE) hold the camera and power button until you see the M logo, then release the power button but keep holding the camera button. You should see a caution sign. Next, click the up button (on the volume rocker) and camera button after. Keep trying it if it doesn't take you to a menu. Next, slide out your keyboard then using the d-pad navigate to "apply update.zip" and click the middle button. Once its applied, you should have a bigger, longer menu. Then navigate to root phone in the new menu. Once this is done, you should be rooted.
How to apply custom roms:
Now that you have root and an OR (Open Recovery), turn on your phone and plug it into your computer in memory card access. (Or, you can navigate to the OR [By above method] and click memory card access, it should be the first or second option in the menu)
Once you are at the root of your sd card, go to OpenRecovery folder, then click updates. After that, put a rom that is an UPDATE (Some roms are not, some can be nandroid backups. It should specify on thread) For example, as of now, cyanogen mod by kabaldan is an update.
If the rom is a nandroid backup (Again, it should specify on thread) (For example, as of now, MotoFroyoSense is a nandroid backup), then navigate to the root folder then go to nandroid folder and click one of the folders within the nandroid folder (any, it doesn't matter) and put the nandroid backup (AS A FOLDER, not rar) and finally, turn off your phone.
Then navigate back to the OpenRecovery menu and click updates (if its an update rom) and click it, or if its a nandroid, navigate to nandroid then nandroid restore, and restore the rom.
Remember to wipe before you apply any roms!
Now, as an addition, here are all the roms available for milestone! They can be found in a cleaner thread: http://forum.xda-developers.com/showthread.php?p=11593755#post11593755
2.2.1 (GOT) Leak roms:
The Froyo Mod by 89luca89:
http://forum.xda-developers.com/showthread.php?t=815595
Cyanogen Mod (6.1.2 I think) by the famous kabaldan:
http://forum.xda-developers.com/showthread.php?t=784750
Edit: There are no more updates for cyanogen mod 6 for our milestones from kabaldan (nadlabak)
Edit2: Updates for Cyanogen Mod 6 can be found here: http://forum.xda-developers.com/showthread.php?t=1155454 by milaq
Shadowmod-br by Edgard Castro:
http://forum.xda-developers.com/showthread.php?t=930275
iceandfire by iceandfire:
http://forum.xda-developers.com/showthread.php?t=886471
MIUI rom by Miui-Team:
www.miui.com
Lalit Miui mod:
http://forum.xda-developers.com/showthread.php?t=850276
For more Miui info, you can go to miui-dev.com (Run by Markhuk)
HO!NO! CM6 mod by HO!NO! (As of now, this must be applied over CM6 as nandroid. Please ensure that the version of HO!NO! complies with whichever version of CM6 you are using. Also, if market is not functioning properly, there is a method to fix on the thread):
http://forum.xda-developers.com/showthread.php?t=849676
There is also a rom called Cronos Froyo but it is not on these forums anymore. A simple google search can probably get you to the right place.
Gingerbread roms for GOT 2.2.1
These can be applied with the GOT 2.2.1 sbf (YOU MUST HAVE ROOT!)
Cyanogen Mod 7 (nightly, so its probably beta) kabaldan:
http://forum.xda-developers.com/showthread.php?t=941346
ShadowMOD-BR v2.3.2 by edgardcastro:
http://forum.xda-developers.com/showthread.php?t=939555
Eclair (2.1) roms
Telus Lite V5 -- THE Fastest Eclair mod by xslntx :
http://forum.xda-developers.com/showthread.php?t=717377
I think these are compatible with both 2.2.1 (GOT leak) and 2.1
MotoFroyoSense by Dexter Picard. This is a Desire Z port to milestone by the great Dexter Picard. (I can confirm this working on 2.2.1 GOT leak using Androidani 3.3 and wiping dlavik cache + cache after nandroid update. I DO NOT THINK YOU CAN WIPE DATA SO YOU MUST NANDROID BACKUP BEFORE YOU INSTALL):
http://forum.xda-developers.com/showthread.php?t=786316
HTC 2.1 Senseui Mod for Milestone by Dexter Picard. This is a 2.1 sense port from Desire ( I think). (This can be confirmed working for me on GOT 2.2.1 leak using androidani 3.3 and wiping dlavik cache and cache after nandroid backup. )
Other Roms that I am not sure if are compatible with 2.1 or 2.2.1 (GOT LEAK)
MotoBlur for Milestone by Dexter Picard:
http://forum.xda-developers.com/showthread.php?t=755785
Fast-Light-Rom by HTCDevil
http://forum.xda-developers.com/showthread.php?t=722304
Eclair Mod by 89luca89:
http://forum.xda-developers.com/showthread.php?t=772031
Now for avaiable leaks so far(2.2)(Froyo)
Jan.25/10 Leak 2.2.1 (I THINK) : http://forum.xda-developers.com/showthread.php?t=929646
Older leak : VIVO: http://forum.xda-developers.com/showthread.php?t=913938
Oldest leak: GOT 2.2.1:
http://groupoften.wordpress.com/2010/10/16/g-o-t-2-2-1-released/
Other (Supposed) European 2.2.1 leak:
http://forum.xda-developers.com/showthread.php?t=929799
There is also a project for brute forcing the milestone keys!:
http://forum.xda-developers.com/showthread.php?t=883376
Open Recoveries:
Androidani 3.3 by Azhad:
http://forum.xda-developers.com/showthread.php?t=796679
Petitions:
Petition to get bootloader free + 2.3 on milestone by Wing_Zero85 :
http://forum.xda-developers.com/showthread.php?t=876903
____________________________________________________________
Thanks to all the developers and all the members that made this happen. I want to say a specific thanks to sileshn for unintentionally inspiring me to make this thread
Please press the thanks button if I helped. If a mod thinks this should be stickied, please do

Good work. A newbie can find out what he wants and where to go from this thread.
Miui ROM original site is miui.com ( Chinese Developers ). There is also miui-dev.com ( Run by Markhuk ). Then there is Lalit's MOD.

I would suggest to also add a section that deals with HOW TO , like how to nandroid / how to get your phone to stock etc.

There is the european froyo leak, its in the general forum.
Thanks
Sent from my Milestone using XDA App
Edit: link
http://forum.xda-developers.com/showthread.php?t=929799
by zozul

Shadowmod-BR by Edgard Castro (I think his username here is edgardcastro as well)
MIUI by MIUI-Team
Sent from my A853 using Tapatalk

Cronos hs advance to v'18.1 with latest kernal. Blog unfortunately off line for a few days.
Regards, PK

sileshn said:
I would suggest to also add a section that deals with HOW TO , like how to nandroid / how to get your phone to stock etc.
Click to expand...
Click to collapse
After about an hour of typing, I have posted the How-To. I have also realized there is another thread that is already stickied for this -.-. I have also included how to apply roms for both nandroid and update.zip files.

Ah nice initiative mohit!
OT: btw ViKiD here
you are rocking on plenty of Android forums i see! Good job bro!

bloodhawk said:
Ah nice initiative mohit!
OT: btw ViKiD here
you are rocking on plenty of Android forums i see! Good job bro!
Click to expand...
Click to collapse
Thanks man

Very nice work, congratulations.

Now, if a mod could just give this some spit & stick it up top.
Sent from my Milestone

motorator said:
Now, if a mod could just give this some spit & stick it up top.
Sent from my Milestone
Click to expand...
Click to collapse
Thanks and I have already requested a mod to sticky this thread.

I read somewhere, someone put a file with all the moto apps, does anyone knows where?

What does one has to do to get the MotoCam working on any rom?
I know i've asked this in another thread, but i wanna know! I prefer that cam!

luishawk said:
What does one has to do to get the MotoCam working on any rom?
I know i've asked this in another thread, but i wanna know! I prefer that cam!
Click to expand...
Click to collapse
Hi, it may be possible to extract to other roms. However, it is included in this: http://forum.xda-developers.com/showthread.php?t=929646. For best results, I would use the nandroid backup created by sileshn
Edit: Honestly, I prefer that camera over the one that is found in Cyanogen 6, FroyoMod, etc. I too would like to find out if someone can use this camera instead of the one found in other roms.

i found that very helpful, great job!
a section about overclock would be great!

TheKawa said:
i found that very helpful, great job!
a section about overclock would be great!
Click to expand...
Click to collapse
Thanks, and please press the thanks button. Also, to overclock, just go to google, search milestone overclock and find the google project one and download the apk. YOU MUST HAVE ROOT!! Good luck Or, for more experienced members, just use the option in Androidani 3.3 (There should be one)

Just a question. I live in South Africa, and I got my Milestone here. If I check my version with the motorola software update application it just tells me I have a Motorola Global phone. So which vulnerable recovery will I need to download? Also, how will this affect my baseband versions etc?

I am currently running the latest stock Eclair on my Milestone, and found this thread as the most thorough instructions available. I am new to android flashing, but not new to phone flashing.
So, basically in order to upgrade to the Cyanogen mod, i would need:
1. Download this for vulnerable recovery (same as open recovery?) UK RETAIL (RTUK)
2. Install it via RSD Lite
3. Wipe everything in the data + cache + dlavik folders on my phone. (do I have to wipe the SD card at any point?)
4. Install Cyanogen Mod via open recovery
Did I get this right? Did i miss something? Thanks!
Is there are a step I should pay extra attention to in order to not screw up my phone?
Thanks and sorry for being such a newb.

FrostyWolf359 said:
Just a question. I live in South Africa, and I got my Milestone here. If I check my version with the motorola software update application it just tells me I have a Motorola Global phone. So which vulnerable recovery will I need to download? Also, how will this affect my baseband versions etc?
Click to expand...
Click to collapse
If I were you, I would update to GOT 2.2.1 as the vulnerable recovery is already there. You would just flash using rsd lite (link in first post) I am not sure if any drivers were required. To be on the safe side, I would google (34 bit or 64 bit) windows xp, vista or 7 motorola milestone drivers depending on which one you have. I had drivers when I did this. I will try to find links when I have time. I would flash the according GOT 2.2.1 leak and use androidani 3.3 OR to I install basebands if they are the wrong one. It is really eqsy to root and install roms on milestone with this. I would just use my tutorial to install got 2.2.1 and install cyanogen mod 6.1.2 (best experience for me).
Good luck
Sent from my Milestone using XDA App

[Q] Simply Honey Revolution 5.1 on SGS

I've got some questions regarding the install documentation of Simply Honey 5.1 Revolution for SGS ROM
Install Instructions Coming From Froyo OR ECLAIR(CM7/MIUI ODIN TO STOCK FIRST)
First Question regarding CM7 - Does this include CM7.1 as well? The example outside the parenthesis says Froyo or Eclair - CM7 is GB so this is not clear
- 1. Disable any Lagfix.
- 2.Download - xxx LINK REMOVED xxx This is the light version with hardly any apps and only one keyboard and 4 lock screens.
- 3. Flash via ODIN. USE 512PIT FILE.
- 4. Let phone boot. Wait 15 minutes and reboot.
- 5. Enjoy. You may now proceed to the MediumOR Large.
What is the difference between medium and large? Where are these files? I see a Light and Full but nothing else.
[/SIZE]
Install Instructions
Coming from Any Gingerbread Rom (If bootloaders aren't installed or you have trouble follow steps above.)
CM7 issue listed above. Any GB rom sounds like any - including CM7 this adds to the confusion of what will/won't work here.
1. You must first be running a Gingerbread rom (Doesn't matter Lindroid, Rainbows, your cousins top secret GB rom.) If you are not then please follow instructions above.
2. Place SimplyHoney5Beta1.zip on your SD card
Filename is out of date. Please link new file or list correct filename. If the ROM is out of Beta, the filename in the instructsions should reflect this.
3. Use rom manager or flash through recovery.
4. Let phone boot. Wait 15 minutes and reboot.
5. Enjoy
The new script is wipe for who come from SH <3.3 and from Froyo/GB!
It doesn't do wipe if you're running SH 3.5+ ROMs! Very Simple and automatic!
I've called it the "Anti-Noob" Script!
ONLY FOR CWM VERSIONS!! ODIN VERSIONS ALWAYS DO WIPE!!
Downloads CWM Full Roms
Simply Honey 5.1 Final
Light: xxx LINK REMOVED xxx 5 Locks Screens/ Modify Power Control Menu Options
Full: xxx LINK REMOVED xxx 10 Lock Screens
What is the purpose of Update1? Should this be flashed after Full? Is it flashed through CWM recovery? Some additional information here might be helpful. It is linked but no indication of why or when one would use it.
- Update1 - Gallery3D, Polaris Office, SNS Account -
xxx LINK REMOVED xxx
Is this section below a second set of instructions - you seem to list a If you have problems section above; however this one is more comprehensive. I'm not sure which one to follow if I have problems.
HOW TO
The anti-noob install script is a double edge sword so to speak. On one hand it is convinient as it doesn't do a wipe install if already on Simply Honey 3.5 and up. On the other some data needs to occasionally be wiped. That said if you experience ANY problem please follow the steps below.
1. Force Close of certain apps...go to settings/applications/manage applications/all and clear data of the offending app.
If that doesn't work then use Tiatnium backup to wipe data and uninstall the app (as long as it's not a system app such as phone or contacts or settings, you get the picture. Now you are free to re-install the app.)
2. The next step is to try and re-install the rom. Boot into recovery and select install from SD. After it's done and you reboot give it the 15 minutes. Now try again to recreate the original problem.
3. If the problem persists then boot recovery and wipe data factory reset and re-install the rom.
4. Problem still there then ODIN to stock (Stock ROM recommendation?)with repartition, ODIN the Simply3.8 Odin/Heim package. After rebooting boot into recovery and install the latest release of Simply Honey.
If these instructions are still useful, please link to SH 3.8 Odin/Heim package pls.
5. If all else has failed make a backup of everything you want saved to your computer. Boot recovery and go to mounts and storage and select format SD. After it's done reinstall Simply Honey's latest release.
6. If your problem still remains after doing all of this or just the last step then I suggest finding another rom as this one may not be for you.
I made an attempt to convert from CM7.1 this weekend; it wasn't clear what was going wrong but I couldn't get SH 5.1 to load properly. I tried to Odin the SimplyHoney 5.1 light version as per the first group of instructions, however, it was unclear whether I needed to repartition or not. the phone began the robot voice indicating partitions were not correct. I odin'd back to stock and reflashed CM7 with no problems.
Please understand I'm not trying to be critical, and I have rooted/flashed a number of phones over the years. Although I've been a fan of CM in the past, it's absolutely not where it needs to be on the Galaxy S/Vibrant and the Nightlies are not getting there fast enough. After reading the settings/features and positive comments for this ROM I'd really like to try it out, but the vague instructions and lack of links are not making this process easier.
If one of the developers can answer some of these questions, I'd be willing to assist writing documentation for this and future SH releases.

[HOW TO] v6 SuperChager - ready patched services.odex - HTC One S (Stock) ONLY

I'm sure that a lot of people already know about the -=V6 SuperCharger=- by zeppelinrox.
If you are not familiar with his great work please follow the link above and read more about it on his thread.
Those of you who have already tried it on their HTC One S (stock) will probably know that there is a whole different level of complexity when it comes to installing it on an ICS ROM. First of all, on any ICS ROM you have to patch the framework library services.jar to get the full functionalaty of the V6 SuperCharger. To make matters worse the HTC Sense is an odexed ROM meaning that you have to do all the patching manually, which is by no means a trivial exercise. Of course you may decide that you don't want to go patching any files and you may be happy with the limited functionality that you get from the V6 SuperCharger as it is. If that's the case you probably won't find this thread very useful...
However, if you're one of those who will not settle for anything less than the full functionality, you need not worry anymore!
Over the last few days I've done all the hard work of decompiling and manually patching the stock services.odex library so people don't have to do it themselves anymore. Not only that, but I've prepared separate versions of the services.odex for each of the three launcher SuperCharge options available:
1. Hard-to-Kill (downloads 1 & 5)
2. Die-Hard (downloads 2 & 6)
3. Bullet-Proof (downloads 3 & 7)
In addition, I'm also including the stock services.odex file so you can restore it back to your system in case you have any problems with the patched files.
4. Stock services.odex (download 4)
Installation procedure:
DISCLAIMER: I take no responsibility whatsoever for anything that might go wrong with your phone, for any and all data loss, for bricking your phone, etc. You do this at your own risk and it is 100% your responsibility.
WARNING! The files provided are specifically for, and have only been tested on, HTC One S with Stock Sense ROM v1.53.401.2 (Europe). These files may also work fine on different versions of the Stock Sense ROM but I haven't tested that. However, if you use them on any other (custom) ROM they are most likely to get your phone either stuck at boot or into a boot loop!
REQUIREMENTS:
a. First and foremost your phone needs to be rooted and have BusyBox v1.16.2 or higher installed. This is a requirement for the V6 SuperCharger script to run so there's no way to get around it.
b. To install the patched services.odex file you ideally need to have a custom recovery installed, such as ClockworkMod. This way you can just flash the patched services.odex from the recovery and if anything goes wrong, simply flashing the stock services.odex over should get you out of trouble (stock file also provided as a recovery update). While it is not absolutely necessary to save a recovery image of your ROM, I would strongly advise you to do so as it's always a good idea to have a recent recovery image to hand just in case (e.g. there is a chance that the stock services.odex included in here may not work if you have a region/operator specific Sense ROM on your HTC One S). Please keep in mind that the stock services.odex included in here comes from Stock Sense ROM v1.53.401.2 (Europe) so it may not work on other versions of Sense ROM!
c. If you don't want to use the recovery update file, you can also download just the services.odex and install it manually. However, if you choose to do this then you're on your own as I don't have enough time to write a tutorial on how to install it manually.
Step 1. If you haven't already done it, go to the -=V6 SuperCharger=- thread by zeppelinrox and read up on the script and what it does.
Step 2. Follow the instructions on the thread (see Step 1) on how to install the -=V6 SuperCharger=- on a typical non-ICS system.
You can get the latest version of the script from this post: http://forum.xda-developers.com/showpost.php?p=18703418&postcount=5021
Step 3. Forget about manually patching the services.jar or the services.odex file! Just download the version you need from the bottom of this post AS WELL AS THE STOCK VERSION! You will need the stock if your phone gets stuck on boot. For the installation, see the two options below. Before you do anything however, I strongly advise you to save a system recovery image just in case.
a.The first 4 attached files, named update-services.odex-[something].zip, are recovery update files meant to be flashed via a custom recovery such as ClockworkMod. After flashing the recovery update, also wipe cache and dalvik cache and then reboot.
b. The last 3 attached files are just archives of the patched service.odex files. If you want to go this route you can find some guidance on the -=V6 SuperCharger=- thread in terms of where it needs to be installed and what permissions it should have. Also, if you're using this method don't forget to do a SuperClean & Reboot using the option in the V6 SuperCharger script.
Step 4. It is normal for the first boot after installation to take longer than usual. If your phone has gone past the boot animation and is displaying a windows saying something like 'upgrading applications...' then it's all gone fine so just wait for it to finish. If your phone hangs on the boot animation longer than usual it means that it's probably stuck there and the patched services.odex file is not compatible with your ROM. DO NOT PANIC! Simply go to the recovery instructions further on.
Recovery.
a. If you phone is stuck on the boot screen, hold the power button pressed for about 10 seconds so that the phone goes into hard power off (the touch keys below the screen will start blinking after a few seconds, that's normal).
b. After that just boot into recovery as you nomally do (while holding the volume down pressed, also press the power button briefly and the phone should start into the boot menu; in there, scroll using the volume up / down keys and select the RECOVERY option by pressing the power key).
c. In the recovery simply flash the stock services.odex update file, wipe cache and dalvik cache and reboot. Now the phone should start up fine but your services.odex will not be patched.
d. If your phone is again stuck on the boot screen, you'll have to do a full restore of your ROM from the image that I have strongly advised you to save earlier.
Good luck and I hope you find this useful! ​
Oh, and pleeease use the Thanks button! ​

thanx, just installed busybox then flashed "Hard to kill" thru recovery, booted right up on Noble 4.0

Bxrxyxaxn said:
thanx, just installed busybox then flashed "Hard to kill" thru recovery, booted right up on Noble 4.0
Click to expand...
Click to collapse
Thanks, but if you're using this patch on Noble 4.0 it will have absolutely no effect.
That's because Noble 4.0 is a deodexed ROM which means that the services.odex file you've just installed is simply ignored by the system.
Instead you should patch the services.jar file using the online patching tool for deodexed ROMs provided on the V6 SuperCharger thread.

will try on stock T-MobileUS nand later...but thanx for the heads up, will do, edit: Noble already has it

Flashed bullet-proof on stock TMOUS rooted ROM. Caused boot loop. No surprise, it's a different ROM but thought I would give it a go anyways.
Thanks for the post, will definitely use if I go with an EU ROM.

tmobile us
Will this work on the tmobile us one s? Update: noticed the post above stating it doesnt work for T-Mobile us.

[Rom] ROMs for Alcatel ot 990

Hi,
I make this thread to summarize the avaible Rom for The alcatel ot 990
Sorry, for mistakes
I am not responsible for bricked phone

Android 2.2.2 Roms
To come back to a 2.2.2 Rom, you have to do that before flashing the Rom (With this, you downgrade to a 2.2.2 Télénor Rom and after, you can install another 2.2.2 Rom) (Do this if you are using a 2.3.4 Rom) (Thanks to qltsar)
Now the 2.2.2 Roms:
- The French Rom stock:
1st link
2nd link
(Save these files in the same folder, because the second archive is the end of the first)
You must download the two part of the rom to install the rom​This backup of Rom come from my phone
To install this Rom, you need to have the ClockWorkMod Recovery installed and the install script from gulyuk.s.
-The French Rom Orange
This backup of Rom come from niidhope from the French thread on the alcatel ot 990, on the hardware forum.
To install this Rom, you need to have the ClockWorkMod Recovery installed and the install script from gulyuk.s.
- The Ewra Rom(Thanks to gulyuk.s)
This Rom can overclock the phone
(The max frequency for the Cpu is 787 MHz. If you want a max frequency of 825MHz, flash this after installing the EWRA Rom)
This Rom come from this blog
To install this Rom, you need, only, the ClockWorkMpd Recovery installed.
-The o2 Rom
This Rom come from this blog
To install this Rom, you need, only, the ClockWorkMpd Recovery installed.
-The de-branded ROM
This Rom come from this blog
To install this Rom, you need, only, the ClockWorkMpd Recovery installed.
(send a private message, if I forget Roms)

You are so cute.

How to install Roms on the alcatel ot 990
First, you need to install the ClockWorkMod Recovery:
-If you are using a 2.2.2 Rom, you must follow this post (Thanks to profete162)
-If you are using a 2.3.4 Rom, you must follow this post (Thanks to sigprof)
If you don't need the gulyuk.s script, you must put the archive on your sdcard, and you have to go to "install zip from sdcard" then "choose zip from sdcard" and now choose the archive that you have put on your sdcard.
If you need the gulyuk.s script,you must, firstly, download the
BackupAndRestoreOT990 archive (from ot-990.blogspot.fr) unpack it and put the two file on the sdcard (don't unpack these files).
Secondly, create a folder named "firmware" on the root of sdcard.
Thirdly, unpack the archive of the Rom you want to install, and put the three file (boot.img, custpack.img and system.img) and the "firmware" folder.
Now go to the ClockWorkMod Recovery, choose "install zip from sdcard" then "choose zip from sdcard" and choose "restore_by_Gulyuk.zip". (The script install the three file of the "firmware" folder).

Android 2.3.4 Roms
Before install a 2.3.4 Rom, you must do that (Thanks to Danijel_rs)
Now the 2.3.4 Roms
-The French Rom stock:
1st link
2nd link
You must download the two part of the rom to install the rom​Provide by me
To install this Rom, you need to have the ClockWorkMod Recovery installed and the install script from gulyuk.s.
-The French overseas Rom stock:
1st link
2nd link
You must download the two part of the rom to install the rom​Provide by Cisqo from the French thread on the alcatel ot 990, on the hardware forum
To install this Rom, you need to have the ClockWorkMod Recovery installed and the install script from gulyuk.s.
-Marina Rom lite
Provide by this thread
You can overclock your phone, if you flash this in the ClockWorkMod Recovery.
To install this Rom, you need, only, the ClockWorkMpd Recovery installed
-TheMOONSTONE:
odexed
deodexed
Provide by heyjoe66 from this post
To install this Rom, you need, only, the ClockWorkMpd Recovery installed
-QME
Provide by qltsar from here or there
You can overclock your phone, if you flash this in the ClockWorkMod Recovery.
To install this Rom, you need, only, the ClockWorkMpd Recovery installed
-Jellybean Inspired Gingerbread
Provide by toxic77 from this thread
To install this Rom, you need, only, the ClockWorkMpd Recovery installed
-Android 4.0 ICS Themed QME Rom
Provide by toxic77, for more details
To install this Rom, you need, only, the ClockWorkMpd Recovery installed
-v5H6-0_mod
Provide by gulyuk.s from here
-Cyanogenmod 7
Provide by gulyuk.s and Shkerzy
(send a private message, if I forget Roms)

Hi guys,
Few days ago I bought Alcatel OT 990 and since then i was trying to read as much as I can about this phone, about ROM's, rooting etc...Because this is my first Android phone...
So, back to the topic, I was looking for a custom ROM, one without dozens of pre installed applications and stuff I will probably never use. So I was suggested to try French stock ROM (thanks, that was push i needed to overcame my fears of bricking phone)...
French stock rom (required rooting, installing recovery and gulyuk.s script to install firmware) and gain nothing except SU rights on my phone and different welcome screen when I turn my phone ON...
So, my question is, does anyone knows is there a custom rom, some kind of "clean slate" without bunch of "useless" applications?
Boris

No "clean slate" ROMs yet. Hopefully CM7 is going to be one. Meanwhile use some of available Root Uninstaller programs available on Market (I hate GP combination of words). But be cautious, With root uninstallers You can brick Your phone (nothing that can't be fixed by re flashing ROM but it is a pain in the... You know)
Bole, samo hrabro

Well, I will not uninstall this what I have done until that CM7 comes out... then I will see what is smart thing to do...
Send me a pm if you know some good instruction on how to set partition on SD card..

Do you want to use link2sd?
Maybe this can help you
If you want more app space, you mustn't delete this apps
Code:
[COLOR="Red"]GoogleBackupTransport
GoogleCalendarSyncAdapter
GoogleContactsSyncAdapter [/COLOR]
GoogleFeedback [can be delete but you must reboot to stop Force Close]
GoogleQuickSearchBox [useless if you don't use the search button]
[COLOR="Red"]GoogleServicesFramework [/COLOR]
JrdSetupWizard [useless after first setup of the phone]
LatinImeTutorial [just an explanation for the cooltek keyborad]
[COLOR="Red"]MarketUpdater
MediaUploader
NetworkLocation[/COLOR]
SetupWizard [useless after first setup of the phone]
[COLOR="red"]Vending[/COLOR]
VoiceSearch [useless if you don't use voice search]
( In red, the thing you MUSTN'T delete, if you don't want to brick your phone)
EDIT: For this, you can use root explorer or es file explorer
Thanks to neoeljin from the french thread of the ot 900 in the hardware forum

Clockworkmod Recovery 5.0.2.8
For more info read this post http://forum.xda-developers.com/showpost.php?p=29180398&postcount=845

gulyuk.s said:
For more info read this post http://forum.xda-developers.com/showpost.php?p=29180398&postcount=845
Click to expand...
Click to collapse
Hi mate ,respect to Your work,any new Rom for Alcatel OT990...thanxx

please anyone knows about custom roms for our phone which is today the best choise? i upgrade the phone to 2.3.4 is there a good and stable custom rom with root that someone wears it more than a month with as less bugs as it can? sorry for my english i hope someone can help me

Some FAQ about HypnoToad install

Hi, if you are looking here, chances are you know what HypnoToad is - a modded KitKat CM for the Relay 4G:
http://forum.xda-developers.com/showthread.php?t=2528752
I am compiling here some of the questions I kept asking the devs and whose answers are scattered in the above (long) thread.
1-You WILL need the latest CWM. Since the download is in img format, you probably need to use a PC to install it. I found that the easiest was to use the free CWM app from the play store and update from CM.
2-HypnoToad is dirty-flashable over cm10.2.x stable. If you have it running, just reboot to your updated CWM (see above) and flash the latest zip ON TOP of your CM install, no need to wipe the phone (that is probably better, but if you want to keep your setup you can dirty flash).
3-You DO need to flash the new gapps for KitKat too
Please feel free to correct me, add new FAQs, etc.
AND THANKS TO THE DEVS!

Guiyoforward said:
Hi, if you are looking here, chances are you know what HypnoToad is - a modded KitKat CM for the Relay 4G:
http://forum.xda-developers.com/showthread.php?t=2528752
I am compiling here some of the questions I kept asking the devs and whose answers are scattered in the above (long) thread.
1-You WILL need the latest CWM. Since the download is in img format, you probably need to use a PC to install it. I found that the easiest was to use the free CWM app from the play store and update from CM.
2-HypnoToad is dirty-flashable over cm10.2.x stable. If you have it running, just reboot to your updated CWM (see above) and flash the latest zip ON TOP of your CM install, no need to wipe the phone (that is probably better, but if you want to keep your setup you can dirty flash).
3-You DO need to flash the new gapps for KitKat too
Please feel free to correct me, add new FAQs, etc.
AND THANKS TO THE DEVS!
Click to expand...
Click to collapse
https://googledrive.com/host/0B-v962-Q8Pd9VWtvN0VrTXlQaTg/apexq_recovery-10.2-347.zip
Is also a fully supported (by TeamApexQ) version of CWM for the relay, in an update.zip form.

This recovery is better (cmw based) and more up to date (also zip):
http://forum.xda-developers.com/showthread.php?t=2588646