[Q] problem with boot - Motorola Milestone Android Development

Hello my motorola started constantly on the bootloader to do?
after installing the rom cyanogen this problem occurred

cyanogen roms are roms made for motorola droid not milestone.
I suggest you flash your recovery again with rsd lite and do a nandroid restore, or load a rom made for milestone

Related

[Q] ClockWorkMod via update

Hi, I recently tried flashing my defy (mb525 from Israel with an Israeli ROM) with Chinese Froyo, flashed the phone and it wouldn't boot, was like that for a while and I tried flashing many versions in hope it would unbrick him, no joy. Long story short now i have a Defy with 2.3.4 (shadow-128, not the fixed version, the undowngradeable version).
I thought maybe finally trying to restore a nandroid backup, but I don't have CWM.
Questions are:
Is there a way to install CWM through a zip file?
Can I restore a Nandroid backup without CWM (or any sort of custom recovery)?
Any other solution that can save my phone?
Thanks Y'all,
hope I will finally unbrick that bastard.
Read this for downgrade and root.
http://forum.xda-developers.com/showpost.php?p=14762402&postcount=143
Didn't work, just like all ROMs before, it shows the moto logo, then shows, motoblur, or android or any other animation (depends on the version), and its stuck on that an not starting the phone.
if you now in 2.3.4, cannot downgrade.
read this:
http://forum.xda-developers.com/showthread.php?t=1152377
it works!
Your device isn't bricked. You only have a bootloop.
Like already said, Downgrade is not possible so you should flash a ROM with your Bootloader-version and make a wipe.

[Q] Motorola Defy custom ICS problem

sorry for my little bad english.
I have a problem with Motorola Defy and custom rom ICS ( CM 9 rom ) upgrade. At first, I successfully upgrade it on my device, but I forget to put Battery fix, and my phone drained and couldn't even turn on, stuck in red M (motorola ) logo. I fixed it by putting back 2.2 froyo software with RSD Lite tool. After that, I tried once again put the ICS rom on my device and I do everything( flash .zip , flash kernel, install google apps and install battery fix, wipe data before update .zip, wipe cache and dalvik cache after install ) and every time it stuck in red M logo, and I need to do same procedure with RSD lite.
Do anyone know how can I fix that problem and put back ICS custom rom on my defy?
thank you very much
Motorola Defy with CM10
Hi,
I have recently updated CM10 on my Motorola Defy with green lense camera,
I have noticed that the defult camera app is missing in recent CM10 update zip, please advise.
Regards
Prabhu
Defy CM 10

[Q] problem with custom recovery

hi i recently flashed a cm10.1 rom on my huawei ascend y300, but i faced a lot off bugs in this rom, then i decided to flash my stock rom, but when i booted in TWRP the touch was not working, i heard that twrp doesn't support cyanogen mod, then i flashed a clockwork mod recovery, and now when i try to boot in cwm my phone turns off, i am sick of this situation, tried lots of ways but no one worked, anyone have an idea how to solve it ?
thanks in advance

[Q] Help! Huawei U8800 Bootlooping on 2.3.5 Official Rom after many attempts to fix

Hey guys, I Know this phone is old but please help me
I was using official 2.3.5 ROM and it was getting old so I thought to root and install an ICS Rom so i rooted and installed MIUi ICS ROM (http://forum.xda-developers.com/showthread.php?t=2029969) it was really nice and i thought to install Aurora Rom(http://forum.xda-developers.com/showthread.php?t=1492957) and it was Awsome! so i got into installing new ROMs and i was installing new ROMs almost every week and one day i saw CM 11 KitKat ROM for Huawei U8800 and I wanted to install it but before that i had to install Ble-Part Partition (http://forum.xda-developers.com/showthread.php?t=2615712) i flashed it succesfully and i installed the 2.2 version after that i flashed CWM 6.0.4.6 and i installed KitKat CM11 without any problems!
After some time using it for some time i thought to go back to Aurora as CM 11 was a little buggy and Aurora was the most stable ROM but as i was installing Aurora, i accidently formatted Boot instead of formatting System and without realizing it i flashe Aurora which flashed very quickly rather unexpectedely, and when i rebooted a blue screen appeared. I (surprised) installed official 2.3.5 ROM via dload and when it had installed the phone went into bootloop and i performed a factory data reset and it booted normally. But when i rebooted the phone again again it went to bootloop again. So i installed official 2.2 ROM and it installed succesfully and it never bootlooped in 2.2 ROM. But i wanted to install Aurora but it needs a .35 kernel and whenever i install 2.3.5 it keeps on bootlooping and i cant root it, though i can root 2.2 ROM easily and install .32 ROMs but they are quite old and I want to install ICS, JellyBean or KitKat Rom, which unfortunately i cant
Just in case you would be wondering i have tried many methods to go back to stock partition and none of them works and i have 1.8 GB storage! I have read that distorted partition can cause bootloops on 2.3.5 ROM so if anyone can help me to fix this problem, ill be very grateful as this is a very important phone to me!
And if you have any questions please ask!

[Q] RSD Lite flash failed

Hello, I tried to flash my motorola electrify M to the stock version of android and have encountered difficulties. The phone boots, but that is messed up. It starts with the Razr M rom boot screen (I flashed that rom and moved onto another since it would not boot up). It also shows the boot screen of a Cyanogen Mod. Those screens only last a second or two each. Then it boots up my liquid smooth rom meant for a Razr M. The phone thinks it is a Razr M. Maybe that is why when I used RSD Lite returned I got the error flash failed 1/22 partition_signed. How do I get stock android back? Any help is appreciated.
jbaker22 said:
Hello, I tried to flash my motorola electrify M to the stock version of android and have encountered difficulties. The phone boots, but that is messed up. It starts with the Razr M rom boot screen (I flashed that rom and moved onto another since it would not boot up). It also shows the boot screen of a Cyanogen Mod. Those screens only last a second or two each. Then it boots up my liquid smooth rom meant for a Razr M. The phone thinks it is a Razr M. Maybe that is why when I used RSD Lite returned I got the error flash failed 1/22 partition_signed. How do I get stock android back? Any help is appreciated.
Click to expand...
Click to collapse
Make sure if you have the proper stock ROM.
Check this: Motorola Electrify M Stock Firmware
Flashing the jbstock rom worked well with RSD 6.1.5 thanks.

Categories

Resources