I cracked my screen (while it was in the pocket of my jeans). Anyone know where I can find replacement screen? Is it easy to change it?
Thanks
I can't paste a link here so copy the number and paste it in ebay.com:
280472528404 (description: new original Acer s200 S 200 LCD Screen)
I don't know if it's easy to change..
Philippe_Raimo said:
I can't paste a link here so copy the number and paste it in ebay.com:
280472528404 (description: new original Acer s200 S 200 LCD Screen)
I don't know if it's easy to change..
Click to expand...
Click to collapse
Thank you very much, I will look into this one.
screen seems to work fine, installation was not too hard. However, new screen acts little weird, as once phone is off, backlight turns off immediately, but you still can see image for few seconds under normal light, pixels show through, and then it fades away.
Look for an original AUO H380VL01 or HTC Touch HD Sharp matrix... It's reported to be compatible with our phone
cracked screen too
baddentist said:
screen seems to work fine, installation was not too hard. However, new screen acts little weird, as once phone is off, backlight turns off immediately, but you still can see image for few seconds under normal light, pixels show through, and then it fades away.
Click to expand...
Click to collapse
i have the same thing with my acer screen (cracked in my jeans)
i buy one on ebay (i m waiting the screen)
can you tell me how to do to change the screen ? it's easy?
(sorry for my bad english)
ok it s done
i recieve my lcd screen with tools and i change it
it's easy
the screen is ok thanks for xda and all of you for existing
(sorry for my bad english)
I installed mine today -after 6 months with broken screen- I bought lcd for HTC Touch HD T8282.It is far more cheaper than the acer one and fits perfectly.ebay item 290424248491.
The HD screen is the same of NeoTouch?
I've paid 70€ for a screen for newTouch, but your proposition is more good: 50€!!
Are you sure it's good for Acer? My touchscreen is OK...
Im using it since last friday. its perfect
I received my screen today, but it's difficult to open this mobile phone!
I remove 5 screw on sur back of the phone, but i don't know what remove
There are two more screws at the left and right sides of battery house
littlbox said:
Im using it since last friday. its perfect
Click to expand...
Click to collapse
i have the same prob.... i dropped my phone and my screen blanked ....and i need another lcd .... i was thinking about what you did.... but if i'll get the HTC one the front of the mobile will be with HTC logo instead of the ACER one ...
right?
screen now fixed
I took my phone in to a local shop and they were able to change out the screen using an HTC HD screen (yes, the exact same screen as the neotouch). All is fine with the screen. They messed up the power button, but that is another story. I watched the guy do this and it seemed like a hell of a lot of intricate work to do yourself. I was happy to pay the $120. Now, I just need to return and get them to redo the power button (installed it incorrectly when putting it all back together).
For those adventurous enough- go for it, but I suggest the cheaper HD screen. And no, only the screen was replaced, which is under the touch screen/digitizer that actually has the acer logo. All looks as it did before.
I took my neotouch for a motocycleride in the rain. It didn't like it too much and now the touchfunction is messed up on parts of the screen. It all displays as it should but I can't use parts of the screen. I should be allright with just replacing the digitizer right? Ebay item Item number: 170518652337
Hi, the same for me.
Touch doesn't work on some area.
Need change digitizer or LCD?
Antenna gps
Hi someone tell me where it's possible to buy a part "gps antenna "?
LCD Screens from HTC Touch HD and HTC Blackstone are working correct. Use these replacements instead of original
darks1de said:
LCD Screens from HTC Touch HD and HTC Blackstone are working correct. Use these replacements instead of original
Click to expand...
Click to collapse
Hi,
this didn't work in my case. After replacing my broken original lcd screen with a new lcd display (eBay - No. 120608475783, Original HTC Touch HD LCD Display T8282), I can see that the display is switched on, but it doesn't seem to receive any signal (like you turn on your pc monitor but not the pc). Now I have two questions:
1.) If only the lcd display is broken - should I still see something on the display? Because on my broken display, I only have a black and a white part and some coloured stripes, mostly where the display is broken.
2.) Is it possible that there is something more broken on my NeoTouch or did I simply receive a broken lcd panel? It did fall off the couch, completely flat on the display.
fyi: the new lcd was missing some isolation (on the flexible part with some electrical components) which was present on my original lcd. I used some sticky tape as a replacement because it is directly positioned over some other electrical components on the phone when in place.
New Info:
Everything except from the display seems to be fine - when it is connected to my PC running "My Mobiler". But I have seen pictures of mobiles with a cracked screen whre you were still able to see (partly) the homescreen, etc. On mine, I am not able to see anything while the cracked screen is mounted - only white and black parts and some colored stripes...
Update: The delivered display was broken. Yesterday I received a new one which works perfectly!
many thanks in advance
TrashX
aih, the same story with my f1
anyway could you suggested seller lcd f1 on ebay???
i'm afraid if wrong order with lcd resolution under wvga,,,
some seller show resolution from their prodocut and a lot of seller don't do that,,
please help me..
Related
Hi i have got HTC diamond and i must've sat on it or something, but i have a few large cracks on the internal screen. Touch works fine i mean, everything is in working order, its jsut i have a massive cracks from one side to the other. I'm having trouble finding the right screen because there is the lcd panel with the htc logo and then theres another with just the screen. I want to replace it myself because can't be bothered going through the whole sending the phone off phase. If someone can redirect me to a plae i could get a screen for a reasonable price, that would be great.
Let it go... I'm actually having the same problem and there is one thing you need to know : you need to sold a connector from the LCD screen to the Touchscreen, it's not a connector that you can plug easily.. (((
I just bought a LCD screen and a touchscreen on eBay, but without this sold, it won't work as I would..
I have solder and the kit and if i can find a tutorial somehwere i'm sure it can't be that hard. You said you found it on ebay, do you have a name or maybe a link? how much did you pay? =-s
Ok so i walked into my desk at work last week and cracked the LCD - i had already puchased a new digitiser as my screen was getting pretty scratched up so i figured i'd simply buy a new LCD and take the phone and new parts round the corner to my local phone shop who were happy to replace my screen and return the next day.. great.
Fast foward and now i have a BIG problem. The new LCD doesnt seem to work once the phone has booted. SO, when you turn the phone on you get the usual windows boot screen with the rom info in red in the bottom corner (im using Monx's latese 6.5 rom). After that though it all goes Pete Tong, when then alignment wizard starts the screen goes nuts, flickering like an old TV and not displaying a steady image. The guys at the store say the phone is damaged from the knock to the screen however before I did a hard reset and removed my sim and SD card the parts of the LCD that were still able to display the today screen etc were showing everything correctly and flicker free and even allowed me full touch control with the stylus.
I basically need some advice from people who know a thing or two about replacing Touch Pro screens. Despite what the shop guys say i suspect that my screen is not compaitble with my Touch Pro which is originally a UK Vodafone but i now live in Canada and got the new LCD from the States. The person who sold me the LCD said it was compatible with all Touch Pros & Diamonds, but then he would say that wouldnt he!
My options are either buy another LCD and hope that does the trick or bite the bullet and get a new crappy canadian contract and a new handset. please help me ive tried the search and cant find anything that helps me and im desperate for a solution!
Cheers
Its a LCD issue what you got, my guess is that the person at the store either gave you a faulty one or its a duplicate lcd,also cleaning the LCD connector with alcohol would be a good idea.Its very rare that in the Diamond/Touch Pro category the connector to get damaged.
So year i dropped my phone in the bathroom and cracked the screen and now i can only see a tiny portion of the screen. Considering i also have the newton ring on my phone i think its time for a new lcd and digitizer. Would someone with experience in this area take a look at the following link and let me know if this is all i need for a replacement.
http://cgi.ebay.com/OEM-Replacement...wItemQQptZPDA_Accessories?hash=item41473b5370
You didnt say what phone you have!
If you have a Touch Pro then it looks right - i believe the fuze screen is slightly different (no front camera) so if you use this screen on the fuze you may see something through the camera lens.
I replaced mi display , it took me 2 hours to do it, but finally it worked fine. The only issue was the new display has a different color, the digitizer just worked perfect, even better than new, but the color is different, now the colors are less vivid and less brighter, I will try to adjust the display color settings, I will do it tonight.
oh wow good eye didnt even notice that. i guess ill go with this one i just found.
http://cgi.ebay.com/OEM-HTC-FUZE-LC...wItemQQptZPDA_Accessories?hash=item3ef8817bf6
hey GussMiami, do you DIY your screen replacement?
I would like to replace my LCD by myself, but I do not know how to do it,,, tried to youtube it with 'replace touch pro lcd screen' or some thing like that but came up nothing.
tq before,,,
ps: if I have blue spots on my screen, is it some kind of dead pixels?
Xue v.2 there are a couple of guides around on replacing the screen http://www.att-phones.org/att-htc-fuze-user-manual.html
I ordered a new Digitizer and LCD for my Fuze yesterday as mine is somewhat scratched up, the job does not look particularly easy, at the moment I am debating finding someone else to do it for me vs possibly wrecking my phone doing it myself, from what I have read the hardest part is making sure not to break any cables/wires (commonly I see people breaking the speaker wires).
oh thank you naiku,
well, I think I will buy the lcd+digitizer for 30usd from ebay and have htc care to replace it for me,,,
plus I need to fix the keyboard as well. Let the pro doing the fix LoL
Bought a second hand HTC Diamond that works real well. Just ordered an extended battery and a new back to cover the thickness of the new battery but the screen needs to go and be replaced.
Has a couple scratches (Isn't too bad) but there's one right near the forward facing camera that pisses me off because I always see it when I'm looking at the screen.
How hard would it be to replace the screen (By myself) and where would be the cheapest place to buy a new screen for it? I want a quality OEM (If possible) screen for it, not a cheap Chinese knock-off.
Check Ebay. There is a lot of lcd's and digitizers for Diamond.
Here is how to video: http://www.youtube.com/watch?v=9LrlBpgskwU
HTC's most hard devices to change digitizer are touch pro, diamond, hd and hd2.
they are sticked with lcd.
sokomind said:
HTC's most hard devices to change digitizer are touch pro, diamond, hd and hd2.
they are sticked with lcd.
Click to expand...
Click to collapse
Ooh ..... So you offer repair services !!!! If it is so nice
ok here is a link to new screen http://www.amazon.com/NEW-Touch-Screen-Diamond-P3700/dp/B0026UECGA/ref=sr_1_2?ie=UTF8&qid=1293737165&sr=8-2
http://www.htcrepairparts.com/touch-screen-digitizer-for-htc-diamond-p3700-p-948.html touch screen
My new screen of lg really works well.
Normally , a full display will cost you at about 40-50E. At least this are the prices here.
I too have a stupid display , it has some little white dots under it that light up when the lcd lights up. Not a big problem , but does annoy me
Hey Folks,
I just disassembled my Photon.
The glass was broken and I got a new one on ebay.
Disassembly went good, i used this guide.
On boot, the LCD backlight turns on, but screen stays black. green LCD in upper left corner blinks just as usual. (turns red when charged)
this issue was discussed in the video comments, but there came no other solution then "check plug, check cable"...
The cable of the LCD screen seems ok, i can't see any broken lane, and the plug is fine too.
Did anybody experience this issue and could give me a hint?
Thanks guys
yes, had absolutely the same issue when replacing the glass.
Solution = replacing lcd,too.
sorry
This is so annoying.
I just tested again.
I used "Windows CE Remote Zoom" (this is shipped in the Visual Studio Toolbox) to get a view to my phone. It responds to my guestures, also sends a signal on some touches to vibrate (bottom bar).
backlight is workin, but no picture on the screen.I hate it so much, hate it.
At least I could do a PimBackup, tryin to touch the right area on the screen using "WinCE Remote Zoom"...
[Added]
I shot a used device on ebay, which didn't cost me as much as a new LCD-screen. On The other hand, I am pretty good in assembling the mini. If anyone needs info, PM me