apps missing in market after clean modaco install? - Hero CDMA Themes and Apps

Hi All,
Yesterday i rooted and put modaco 1.1 on my sprint hero. In doing so i felt to start from a clean slate and master reset the whole thing and formatted the SD card (it's not setup for apps2sd, i'm waiting to pick up a class 6 card first). Now i'm trying to redownload all my apps and theres a few that are missing? but then still show up on androlib.com. I tried the androlib QR code, i tried searching in the marketplace, i tried browsing the marketplace and scrolling down for a long time...nothing.
The 2 apps in question at the moment are imeem mobile and wertago. Am i alone on this? sorry for the newbish first post

djxstream said:
Hi All,
Yesterday i rooted and put modaco 1.1 on my sprint hero. In doing so i felt to start from a clean slate and master reset the whole thing and formatted the SD card (it's not setup for apps2sd, i'm waiting to pick up a class 6 card first). Now i'm trying to redownload all my apps and theres a few that are missing? but then still show up on androlib.com. I tried the androlib QR code, i tried searching in the marketplace, i tried browsing the marketplace and scrolling down for a long time...nothing.
The 2 apps in question at the moment are imeem mobile and wertago. Am i alone on this? sorry for the newbish first post
Click to expand...
Click to collapse
imeem
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
wertago

702DROID said:
imeem
wertago
Click to expand...
Click to collapse
I've tried to scan the codes from androlib and your post..both give me search results "there are no matches" thanks.

djxstream said:
I've tried to scan the codes from androlib and your post..both give me search results "there are no matches" thanks.
Click to expand...
Click to collapse
thats funny maybe your barcode scanner needs an update cause im installing wertogo right now (ive already have imeem) from the codes i posted up
try this for imeem (comp of ajones1989 on sprint forums) http://community.sprint.com/baw/servlet/JiveServlet/download/127065-2622/imeem Mobile 2.1.6.apk

I would assume my barcode scanner is working, it reads the proper url (pname:com.wertago and pname:com.imeem.gynoid), and other applications have scanned and found itself just fine
This is really really weird.
The link seemed to work to manually install it, thanks for the work around, but is it possible this is a bigger issue then these 2 apps?

Yeah, same thing happened to me. The weird thing is that all my apps were there at first when I checked but then I think after a while when it fully sync'd with my phone it deleted all but two of the paid apps. And when I try installing the apps that I backed up, they install fine but don't show up on my downloaded list so i'm assuming i'll never get update notifications when I go to the market since they are not there. I had to search and download every app over again.
They need to add that function into these backup apps to somehow put them back up on the market as being downloaded.

702DROID said:
thats funny maybe your barcode scanner needs an update cause im installing wertogo right now (ive already have imeem) from the codes i posted up
try this for imeem (comp of ajones1989 on sprint forums) http://community.sprint.com/baw/servlet/JiveServlet/download/127065-2622/imeem Mobile 2.1.6.apk
Click to expand...
Click to collapse
Where do we get an update for the QR code scanner? I'm on modaco's 1.1 and dolphin browser trying to click on a QR code and it's not working. I'm pretty sure this was working before.

When you are searching for these do you see at the top "1 match" but then in the list where it actually should be does it say no matches found? I have had that happen. Either use a task manager to kill the market place and open it again, or just reboot the phone.

flipzmode said:
When you are searching for these do you see at the top "1 match" but then in the list where it actually should be does it say no matches found? I have had that happen. Either use a task manager to kill the market place and open it again, or just reboot the phone.
Click to expand...
Click to collapse
my top says "no search results"
i've tried doing it right after a fresh reboot, also right after killing all tasks via a task manager, still nothing. thanks.

Related

[SOLVED] iGO 8.3.2 stuck on "Starting.."

SOLVED! See post 8.
I've used iGO 8.3.2 for several months. It's not the most stable, but I still like using it. However, a few days ago suddenly it will no longer load!
I was literally playing with iGO in bed looking at some POIs I'd imported and it crashed. Since then, it gets stuck on the "Starting..." status when launching. If I reset the prefs, it gets stuck after accepting the EULA, and if I re-launch, still stuck on "Starting..."
I've wiped out the entire install, only installed the very basics required (a map, a voice, NO pois, NO custom anything) and it still gets stuck. Checked AGPS, don't use HTC Home, those are two problems with iGO I've found researching this problem. iGO8 doesn't seem to have any registry except a basic one in HKLM which I also tried wiping out.
I'm not sure what else to try.. My only other guess is a corrupted contact, so I've tried disable_outlookpoi=1 in the sys.txt, but not sure that makes any difference, and I have no real reason to think a contact is corrupt.
I'm really at a loss. Any suggestions would be appreciated.
I'm pondering trying iGO8 8.0, but not sure I still have it anywhere.
For giggles, I turned AGPS on and launched it. It gets stuck at the POI Manager with it on. Turned it back off, stuck at Starting. Yay.
what worked for me is... uninstall, clean with SKTools, reinstall.
nir36 said:
what worked for me is... uninstall, clean with SKTools, reinstall.
Click to expand...
Click to collapse
I used SKTools a long time ago to move some stuff from ram to the SD card, but I'm not offhand sure what you mean by just "clean with SKtools", more explanation would be much appreciated.
Reason I'm asking is iGO doesn't create a cab, creates minimal registry entries, and AFAIK only installs into Program Files, so cleaning it up is just a matter of deleting in a few places. But SKtools is pretty powerful so I'm probably missing something that it'll do.
no no, i actually meant a regular clean..
of course, it might have been only the uninstall that solved everything..
maybe you've imported a buggy POI file?
nir36 said:
no no, i actually meant a regular clean..
of course, it might have been only the uninstall that solved everything..
maybe you've imported a buggy POI file?
Click to expand...
Click to collapse
No custom data at all in there, no skins, no POIs, no schemes. I even reduced the maps down to the minimum.
I did do some searching in SKTools for anything related to iGO in the main "Clean" section after uninstalling, found nothing. I searched the registry, only found the HKLM\Software\iGO key I had seen before and have previously deleted. Searched the entire system for *igo*.*
Sigh! I don't know where to go from here! I'm sure if I did a hard reset it'd be fine, but that's not something I want to do. I even went into Outlook and exported all of my contacts out to csv and looked at the output. No funny business in there that I could find, no garbage, etc..
I think I'm going to try iGO 8.0 for kicks, I found it yesterday.
8 is what i'm using. build 54000. works great... and maybe a hardreset IS the best solution.
nir36 said:
8 is what i'm using. build 54000. works great... and maybe a hardreset IS the best solution.
Click to expand...
Click to collapse
Yeah, to be honest 8.0 was more robust.. 8.3 has always seemed to be a little more unstable.. I've never been able to run it on a whole long car trip without it blowing up. But I used it for at least 3-4 months here and there. Again, couldn't use it 100% reliably but it worked.
And now this where it won't work at all.
I need strace on Windows Mobile. Bugs me I have no idea how to figure out what might be going on.
OMFG. It was because I have the internal GPS redirected to GPSGate and it was expecting I guess non-NMEA data. The internal GPSD just basically gives out lat,lon vs NMEA data..
Anywho, I swapped the registry entries around so com1 was the build-in GPS and it fired right up.
I guess it's been a long time since I reset the iGO settings because I've had it set this way since late January.
glad you managed.
nir36 said:
glad you managed.
Click to expand...
Click to collapse
Yeah.. PEBKAC. ID10T, etc ;-)
I know it was a long time since you have solved this problem. But now in 2018 , I have the same problem. But in my car (andorid), a use Igo since car stock navigation is not so "update and cool" as iGo. And after 2-3 days I get this problem stuck on " starting" screen. Only after deleting data in app manager I get it to work, of course then I need to download maps again.
I only Germany maps, and stuff that I get from the official store.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

[APP] ShazamID is now available for Windows Mobile

The music identification software Shazam is now FREE via the Windows Mobile Marketplace. We dont know if this is a limited time offer, so hurry up and grab it while it lasts. Shazam can identify music anywhere: from the TV, radio, or in a bar. Limitation with the FREE version include : 5 Tags per month. Standard data charges apply while using this app.
Shazam is quick and simple to use:
1) Hold your phone towards the music and select Tag Now
2) Within seconds, you’ll know the artist, track and other interesting info
3) From the Tag Details you can buy related content and share the discovery with your friends Start your music journey now!
Ive tried it and it's really really good.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Enjoy
Thats for the heads up. Midomi are in the marketplace too. You have to pay upfront ($5 / £3.19) but song searches are free. However - It does not actually work on my HD2. Seems like its not recording properly or something. I have emailed their support and they said they would work on an update.
For now I think your Shazam find is our best option.
Should be free indeed.
But I don't understand. WHERE AND HOW TO BUY IT?
Once the application is installed there is a menu option to buy the application.
I'm trying to install it but I can't find it through markeplace application and I can't find it on the website.
Is there any special procedure ?
spastik said:
I'm trying to install it but I can't find it through markeplace application and I can't find it on the website.
Is there any special procedure ?
Click to expand...
Click to collapse
Post #1 updated : Cab file attached.
Xeon said:
Post #1 updated : Cab file attached.
Click to expand...
Click to collapse
big thanks !
do i need to pay for a license after every hardreset? i don`t see anything like add key or similar... only pay now
Xeon said:
Post #1 updated : Cab file attached.
Click to expand...
Click to collapse
Thanks, because if we had to wait for the MarketPlace to propose it, we would have to wait for years
Thanks a lot for the info Xeon
midomi is better
What is the difference between that and the previous (free) MusidID we had ?
For a working Midomi on HD2, you have to use the Subzer0 version from this post : http://forum.xda-developers.com/showthread.php?p=4353929
Actually I find much more things with Shazam. Although Midomi is good but trust me Shazam is load better.
Omg so 'ZIT' ("cuz we'll spot the record for you", "based on a complex listening system that also helps the government spy on you" - see gta iv) actually exists in real life? wow, just wow
edit: downloaded and installed, and yea, wow, it actually works, good too, tried some old hiphop songs and it knew all :O
I have a sneaky feeling Apple sponsored the iPhone version as you get the link to iTunes where you can buy the song. That's probably why this isn't free and that is.
Having used shazam and midomi on the iPhone, shazam works a lot better. Assuming of course that they work in the same way (which im 99% sure as they send the data to their server!)
I cannot get Shazam to work on my HD2 here in Denmark. It wants me to set it up but comes up with the error message "Sorry, we couldnt set up Sahazam at this time!".
Has it something to do with copyright issues and the phone companies in Denmark might have blocked this option?
DonDolowy said:
I cannot get Shazam to work on my HD2 here in Denmark. It wants me to set it up but comes up with the error message "Sorry, we couldnt set up Sahazam at this time!".
Has it something to do with copyright issues and the phone companies in Denmark might have blocked this option?
Click to expand...
Click to collapse
Did you install the one in the first post? Weird that should work, actually if it is banned I believe you will not be able to send/receive through internet but as for the installation , that should work.
Denmark is know to be rather a very liberal country, so I guess Shazam is not banned there
I installed it from the Marketplace. The installation succeeds without problems but the program states "press setup to agree on terms and..." and then it fails when I press "setup".
I just tried to uninstall and use the .cab file on page 1. Same problem.
Tried both wifi connection and regular 3G.

Open Home Deprecated

Ok so I have this installed on my phone and I have no clue what it is, never installed it nor can I find a way to uninstall it. Anyone else have it installed and if so did you find a way to delete/uninstall it?
It has the same thing in my downloads section of the market. The app doesn't show up in the app list under settings, though. It's really an annoyance and I think it is also causing the market to give me a false update notification. My boyfriend's phone does not have it installed and is not having any sort of the same issue with the market.
The only thing I think will clear it is a factory reset.
Update: I did a factory reset and before everything restored and I started using apps, it wasn't there. After I started using a few apps it was. No way to get rid of it until you reset the phone again. I don't know which app is causing it, but the few that I did open were task panel, eReader, and a word game. I removed them and reset. It has been quite a few hours after heavy use and it hasn't showed up in my downloads. I suspect one of those apps.
bump
this is really aggravating and many people dont even realize they have it on their phone. I have two nexus ones and its on both of them and on both phones i get the damn phantom application update notification. Has anyone figured out anything more about this? thank you
Where are you guys seeing it? I'm a pretty heavy app user, having installed/uninstalled quite a few, and haven't done any type of wipe; however, I'm not seeing what you're describing.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I believe the the old openhome app had the class name com.google.launcher2 this is same name that google have now used for the new launcher hence the market thinks its installed... which is isn't.
Has anyone tried to install open home & then uninstall? Maybe it will get rid of both...
SilentMobius said:
I believe the the old openhome app had the class name com.google.launcher2 this is same name that google have now used for the new launcher hence the market thinks its installed... which is isn't.
Click to expand...
Click to collapse
Which makes me wonder why Google would allow 3rd party developers to use com.google...
Weird. I don't have that. You guys should use atrackdog to generate an installed alp list and compare them for commonalities.
Like all issues with this phone, I don't know if I'm supposed to contact HTC, google, or T-Mobile. Sound like a software issue so I'm guessing google?
DMaverick50 said:
Like all issues with this phone, I don't know if I'm supposed to contact HTC, google, or T-Mobile. Sound like a software issue so I'm guessing google?
Click to expand...
Click to collapse
I am not sure why you would need to guess in this case. It is neither a hardware or a plan problem. Google is your source for a solution. This is very likely dues to a previous installation of Open Home on an older android. As to why you can not uninstall it I can not answer, but at the least I do not have it in my installed software list.
Are you rooted? If so, you could go in and delete the apk from /data/app
Bicster_ said:
Which makes me wonder why Google would allow 3rd party developers to use com.google...
Click to expand...
Click to collapse
Um, because Apps aren't vetted? com.google is just a java namespace it doesn't change anything or give you magic permissions.
Most likely openhome grew from someone starting with the launcher source and renaming it by adding "2" then tweaking it. The only bug here is that the market is looking for installed apps by "pname" whereas atrackdog doesn't.
Its a Market display bug guys, the app is _not_ on your phone.
SilentMobius said:
Um, because Apps aren't vetted? com.google is just a java namespace it doesn't change anything or give you magic permissions.
Most likely openhome grew from someone starting with the launcher source and renaming it by adding "2" then tweaking it. The only bug here is that the market is looking for installed apps by "pname" whereas atrackdog doesn't.
Its a Market display bug guys, the app is _not_ on your phone.
Click to expand...
Click to collapse
Agreed, although I already left a market comment.
So I am not the only one. I have the bloody app on my phone too. I never installed it. It was there from day one and I can't remove it.

Google Chrome (Windows 7 PC) Problems.

When I try to download or upload anything anything from any site I get a this message:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is my chrome information:
I really hope this can get fixed.
P.S. I have tried reinstalling and logging out of chrome sync already
I use Chrome, never seen anything like that. Get and install v. 20.
I have a different problem; it shows 'close program' error sometimes. Why? Don't you have this problem?
The Third God said:
I use Chrome, never seen anything like that. Get and install v. 20.
I have a different problem; it shows 'close program' error sometimes. Why? Don't you have this problem?
Click to expand...
Click to collapse
v20 is beta correct?
I am assuming that you do have winrar installed?
Have you uninstalled that, or cleared auto opening settings in chrome? Just a couple of guesses and what I would try first.\
When you reinstalled, did you uninstall first and make sure you got rid of all user data left behind?
No, it's not beta version; v. 21 is even released, that's not beta too. Download latest version. Hope the problem fixes.
cwb78 said:
I am assuming that you do have winrar installed?
Have you uninstalled that, or cleared auto opening settings in chrome? Just a couple of guesses and what I would try first.\
When you reinstalled, did you uninstall first and make sure you got rid of all user data left behind?
Click to expand...
Click to collapse
Yes, I have winrar 4.20.
I cleared all setting in chrome including user data and first run data.
Did you uninstall chrome and then actually delete the folders left on your computer that still hold info. Some of them may be hidden in your windows user account folder tree.
sadly none of the fixes you suggested worked. I think I may need to use a different browser
that is too bad, I absolutely love chrome and have never had a real problem with it *knock on wood*
Have you contacted chrome help for it at all? May be worth a try send the scree shot as well as everything you have done to try to fix the issue, as well as anything that was changed on your computer before this happened (which I never asked you, for some reason.)
cwb78 said:
that is too bad, I absolutely love chrome and have never had a real problem with it *knock on wood*
Have you contacted chrome help for it at all? May be worth a try send the scree shot as well as everything you have done to try to fix the issue, as well as anything that was changed on your computer before this happened (which I never asked you, for some reason.)
Click to expand...
Click to collapse
The strange thing is that I JUST freshly installed windows 7. That being the case, reintalling windows again as a last resort wont be much of a problem for me. I will definitely try to contact google, thanks for all of your suggestions.
I am a chronic windows reinstaller myself, lol.
Let me know if you get it to work, or what google says. I am interested to know what's up.
Does your download folder still exist? (Settings->Advanced->Downloads->Download Location).
I had some pretty weird stuff going on when I deleted the folder Chrome was set to download to.
cwb78 said:
I am a chronic windows reinstaller myself, lol.
Let me know if you get it to work, or what google says. I am interested to know what's up.
Click to expand...
Click to collapse
reintalled windows, everything is up and running perfect with chrome beta!
I'm glad hearing that. Hope you enjoy your browsing.
I feel so stupid.
I had the same problem just before, here is what happened:
I have a tendency of derping around in the system32 folder to customize my computer, turns out I was actually replacing files in sysWOW64, which messed up the framework.
Everything is now custom and fully functional!
Chrom can't be support very well in China

Block ads in messenger

Hey all, figured this out a few days ago and seems to have worked, so figured I'd pass it along. This method eliminates sponsored posts in Facebook Messenger. ONLY WORKS ON ROOTED DEVICES.
1. Open terminal, and get superuser access by typing
su
2. am start -n "com.facebook.orca/com.facebook.messaging.internalprefs.MessengerInternalPreferenceActivity"
3. Scroll down until you see
Gatekeeper Override
4. Search the word
sponsored
5. Find the entry in the search results
Android_messenger_sponsered_msg_report_flow
And tap it to toggle. Force stop messenger or reboot.
You're welcome
Is there easier way than this nightmare of console?
I received such error despite fact that I have the root.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Burgscheinkerkdeiktraast said:
Is there easier way than this nightmare of console?
I received such error despite fact that I have the root.
Click to expand...
Click to collapse
I believe it's because of the directory in which you are executing. Try changing directory to the root directory
I tried using "cd" command but got error that "home not set"?
I've been looking for something like that for weeks. I'm having troubles to follow your instructions. Could you share screenshots for example please?
Clarify from what folder we have to execute these commands?
And also, is it normal there is a space here : ".MessengerInte rnal"
Thank you.
Thanks!
Thank you so much, icedventimocha! Worked a treat. :good:
Btw, as Tomatot- noted, there shouldn't be a space in the middle of the word Internal when starting the activity in step 2.
Command worked when I ran it (without the space), and then after a force close, I still get adverts in messenger.
Alas, it has stopped working. Android_messenger_sponsored_msg_report_flow is still turned off on the above settings page, but ads are back.
Doesn't work anymore just tried it, android_messenger_ad_context_handler found that entry but sadly didnt kill ads even tried clearing cache and data before attempting.
Any Messenger mod for non-rooted device? Fedup with the ads
Why?
Wysłane z mojego MI 6 przy użyciu Tapatalka
Does anyone know the new Gatekeeper(s) related to Messenger ads?
It seems like Facebook changed it.
I am testing right now FB Messenger Black from 4pda forum
too old version not supported anymore :/
mermade said:
Any Messenger mod for non-rooted device? Fedup with the ads
Click to expand...
Click to collapse
plz give it too me also
Any news how to disable ads?
Sent from my OnePlus 6 using Tapatalk.
Hi guys,
I think I've found a way to remove ads in Messenger. You need root
1) Download and install My Android Tools: https://www.apkmirror.com/apk/wangq...my-android-tools-0-11-1-android-apk-download/
2) Open it, click on the left hamburger menu, open "service", go to Messenger and deactivate "AdsMessengerService", "AdsProcessPriorityService".
Let me know if it works for you. I didn't get any ads since then.
Didn't work for me unfortunately. Ads are still there. N910F, X-note Kitkat ROM.
Tomatot- said:
Hi guys,
I think I've found a way to remove ads in Messenger. You need root
1) Download and install My Android Tools: https://www.apkmirror.com/apk/wangq...my-android-tools-0-11-1-android-apk-download/
2) Open it, click on the left hamburger menu, open "service", go to Messenger and deactivate "AdsMessengerService", "AdsProcessPriorityService".
Let me know if it works for you. I didn't get any ads since then.
Click to expand...
Click to collapse
Can see ads not working
Tomatot- said:
Hi guys,
I think I've found a way to remove ads in Messenger. You need root
1) Download and install My Android Tools: https://www.apkmirror.com/apk/wangq...my-android-tools-0-11-1-android-apk-download/
2) Open it, click on the left hamburger menu, open "service", go to Messenger and deactivate "AdsMessengerService", "AdsProcessPriorityService".
Let me know if it works for you. I didn't get any ads since then.
Click to expand...
Click to collapse
Does't work for me, LG V30
Edit: I have to amend my own review. I had to hide a total of 3 ads at first (perhaps they get cached or something), but since day 2 of disabling these services there were no more ads. Looks promising!
Dont work on my Samsung Galaxy S7

Categories

Resources