Database Info

Big Problem! Help Fast Please!

Alright so I had previously tried to flash roms and failed miserably. I've been scouring this forum since before I got my Kaiser (I got it last Fri.) and I thought I understood how to flash. Anyways...fast forward after failing miserably, I'd been getting along with just .cab files and installing things that way....fast forward some more to my problem.
I was trying the steps found here:
http://forum.xda-developers.com/showthread.php?t=354061
And I got to the tricolor screen, and USB appeared at the bottom. Well...I unplugged and replugged it and Vista made the USB noises and now I have this "Safely Remove Hardware" icon in my task bar. Nothing is happening, I'm not sure if I'm supposed to remove the hardware, but I'm having some serious troubles. I just want to flash Dutty's v4 rom onto my device and gof rom there.
Someone please help me, if anyone is available now and they wouldn't mind walking me through fixing this my AIM is xdemented3x
Please please please, someone help me.
tldr; Cliff Notes
Stuck on tricolor screen after trying to flash JumpSPL 1.56-KAIS on my AT&T Tilt
KAIS1*0
SPL-1.56.Jump
CPLD-8
USB

did you hard-spl? what do you see on the tricolor screen?
did you try to simply connect the tilt to vista via miniusb and run the exe from duttys v4 rom?
do you have a win xp computer around?

I'm on campus in college, and only have my Vista laptop. If things get severe enough I can go home and use an XP Home pc.
KAIS1*0
SPL-1.56.Jump
CPLD-8
USB
^^^ Thats what I see on the screen.
Should I try to connect it and run the v4 exe while on the tri-color screen?
Thank YOU SO MUCH for trying to help me. (^_^)

From what I see, you have run the softSPL.jump on the device, so now you need to flash hardSPL from the pc - leave the device as is ...Once you have flashed HardSPL then you should be fine to flash roms

delta-101 said:
From what I see, you have run the softSPL.jump on the device, so now you need to flash hardSPL from the pc - leave the device as is ...Once you have flashed HardSPL then you should be fine to flash roms
Click to expand...
Click to collapse
I can't do anything, I'm stuck on the tri-color screen. Should I press the reset button with my stylus? I've tried holding down the power button to no avail.

No, dont reset phone yet, have you tried to flash HardSPL as per the instructions? ---- Phone NEEDS to be in the bootloader mode you described to be able to flash HardSPL

noyz said:
I'm on campus in college, and only have my Vista laptop. If things get severe enough I can go home and use an XP Home pc.
KAIS1*0
SPL-1.56.Jump
CPLD-8
USB
^^^ Thats what I see on the screen.
Should I try to connect it and run the v4 exe while on the tri-color screen?
Thank YOU SO MUCH for trying to help me. (^_^)
Click to expand...
Click to collapse
unfortunately it seems that your device is not hard-spl'd. if it had been, it would have shown:
SPL-1.0.OliPof.
from the tricolor screen, try to install the Hard-SPL. Read here:
http://forum.xda-developers.com/showthread.php?t=334679
it might happen that it deosnt run from the tricolor screen, case in which i wouldnt know what to do by heart, so only suggestion is to read first sticky posts and see if you may find some info in there.

Alright thank-you for your help guys.
I HAVE $5 for the person who leads me to getting my phone working with Dutty's v4 rom on there, just some incentive for you guys. I need this help asap!

you may try anyway to press the reset button. in case it does load windows, youre saved. in case it gets stuck, you press the 2 buttons on the righthand side of the kaiser (power and camera) and do a reset with both of them pressed and you end up again in Bootloader mode...
if you manage to get to windows, go for the Hard-spl in my post above.

You have'nt answered my question.. Have you tried to flash HardSPL from the PC whilst phone is in Tricolor mode? ( with USB showing at the bottom of the screen) If so what happens?

delta-101 said:
You have'nt answered my question.. Have you tried to flash HardSPL from the PC whilst phone is in Tricolor mode? ( with USB showing at the bottom of the screen)
Click to expand...
Click to collapse
I'm running the Hardspl v1.exe on my pc right now and I'm stuck at the instruction where it says "Make sure ActiveSync is enable, hit ENTER to start..."
I hit enter, and nothing has happened.

Ah,, you are trying 2 different methods at once!! you started by using the JumpSPL1.56-KAIS.zip from the thread you pointed to... you should download, and copy to folder on the pc the flash-hardSPL.zip from the SAME thread, then follow the instruction in THAT folder.. that does NOT require Activesync.. Or you could try the HardSPL.exe you are using, but with device booted to windows.. then you start with activesync.

ionutz6 said:
you may try anyway to press the reset button. in case it does load windows, youre saved. in case it gets stuck, you press the 2 buttons on the righthand side of the kaiser (power and camera) and do a reset with both of them pressed and you end up again in Bootloader mode...
if you manage to get to windows, go for the Hard-spl in my post above.
Click to expand...
Click to collapse
Tried the reboot, and it came up with an AT&T flash screen before hte 3g animation.
The splash screen said "Not For sale, Test Only" Or something like that.
I still dont' have my SIM or MicroSD card in and Windows had booted up. I'm about to try the Hard SPL.exe now.

delta-101 said:
Ah,, you are trying 2 different methods at once!! you started by using the JumpSPL1.56-KAIS.zip from the thread you pointed to... you should download, and copy to folder on the pc the flash-hardSPL.zip from the SAME thread, then follow the instruction in THAT folder.. that does NOT require Activesync..
Click to expand...
Click to collapse
Alright....so now that i'm back into windows should I do the JumpSPL thing again and wait till I get locked into the tri-color screen? Or should I try the flash-hardSPL while in windows? I'm confused....

delta-101 said:
Ah,, you are trying 2 different methods at once!! you started by using the JumpSPL1.56-KAIS.zip from the thread you pointed to... you should download, and copy to folder on the pc the flash-hardSPL.zip from the SAME thread, then follow the instruction in THAT folder.. that does NOT require Activesync.. Or you could try the HardSPL.exe you are using, but with device booted to windows.. then you start with activesync.
Click to expand...
Click to collapse
You, sir, are well on your way to winning...scratch that...earning $5, lol. It seems I have successfully flashed hardSPL to my device now. From here can I reinstall my SD and SIM cards and run Dutty's v4 .exe on my PC to install that?

Yep, if HardSPL flashed, you should be fine to flash the rom.. You no longer need to use the jumpSPL

delta-101 said:
Yep, if HardSPL flashed, you should be fine to flash the rom.. You no longer need to use the jumpSPL
Click to expand...
Click to collapse
Alrighty man, Thanks A CRAP TON!
One more thing though, when I downloaded the zip for dutty's v4 and tried to extract it with WinRar it gives me an "Unknown Method" error. Also, it never asks me for a password. How do I get through that?
EDIT** BTW Whats your paypal?

There is an answer to that in the Dutty V4 thread (post 2) - with alternate download - seems to work ok

OMG YES!!!!!!!!!!!
Its at 7% as I type this..just went up to 10% w00t...finally flashing a rom!!! THANK-YOU SO MUCH!!!!! You have just earned yourself $5!!!! THANKS SO much bro. Whats your paypal? PM it to me....I need to send you the money, thanks again SO MUCH! You definitely earned this...

Dont worry, glad to help..

Loosing USB Connection using CustomRUU

Hey all, first post long time reader.
Please dont flame me, i have tried to search for the answer but seem to be going nowhere.
Is anybody getting the Error [262] while using KaiserCustomRUU.exe? I just flashed Dutty's DualTouch v4, that worked great! Now i am trying to flash the radio, i have heard good things about 1.27.12.17. It will not flash, I have followed the instructions over and over again. It gets to the point where it shows the completion bar, it gets stuck with 0%. I follow the instructions, pull the battery out and try again, no luck. I have noticed that during the process active sync goes from green to grey. (I think this is supposed to happen) But the odd thing is that the "Local Area Connection" (for the phone) in Windows XP Network Connection disappears. I am guessing this is my problem. Does anybody know what causes the phone to disconnect from the computer? Or am i doing something obviously wrong.
Any help is appreciated.
also - after it locks up at th 0% screen, and after i receive the error 262, i then unplug the phone from the computer. when i do this, windows makes the sound of a USB device getting unplugged. so does that mean i really didnt loose connection, and the error 262 is due to something else?

Did you use Hard SPL Before flashing.Is a must to not brick your phone.
http://forum.xda-developers.com/showthread.php?t=334679
Read carefully and will be OK.

Yes i have used HardSPL. I have already flashed with Duty's DualTouch ROM, and it WORKS. It was really easy and painless. For some reason I can not get the radio to flash. From my understanding, HardSPL only needs to be done once. That changes the bootloader, i think? Either way, I already did the HardSPL, flashed the ROM, just want to change the radio now. As the instructions said, this can be done after I flash the ROM using CustomRUU. Any thoughts?
I am going to go ahead and try to flash a custom flash screen. Will post back results

I tried using the CustomRUU to flash Kaiser with new splash screen, but no luck. Same error as before. Good news is that the phone still works!

If you are shure about Hard SPL (you can check again if is rited OLIPOF) "Hold Camera + Power buttons together and reset with stylus"-to enter in Bootloader and check again.
If is correct I sugest to reflash with original HTC Rom (wich include radio ) and after that start again with HardSPL --- Radio --- ROM upgarde
For hard spl http://forum.xda-developers.com/showthread.php?t=334679
For original and other info http://forum.xda-developers.com/showthread.php?t=332246
and one of the best link for reverting http://forum.xda-developers.com/showthread.php?t=335568
Good luck !!!

ok so i go into bootloader, and i get
KAIS1*0
SPL-1.56.0000
CPLD-8
i had followed the insructions from this thread - http://forum.xda-developers.com/showthread.php?t=334679
- HTC Kaiser Hard-SPL v1 - CID Unlock & Flash any ROM to your device (4 free)
looks like i did something wrong? it does not say OLIPOF
any ideas? can i just do it all over again, and be safe?
thanks for your help.

You had some luck to flash cooked ROM without Hard SPL.Be more carefuly and read .Those guys work for us to be protecyed from breaking our phones
yes but read carefuly:
Please make sure ActiveSync is enabled (GREEN icon in systray)
and hit ENTER to start...
Kaiser JumpSPL is running on your device, please check your device
screen and follow the steps until you see the tri-color screen.
When done hit ENTER to continue...
Device screen should be now TRI-COLOR and show "USB"
===> PLEASE UNPLUG AND RE-PLUG THE USB CABLE NOW <===
===> PLEASE UNPLUG AND RE-PLUG THE USB CABLE NOW <===
===> PLEASE UNPLUG AND RE-PLUG THE USB CABLE NOW <===
ActiveSync icon should become gray after that.
When done hit ENTER to continue...
Phone screen should now be tri-color and the activesync icon gray
if not, the loading process has failed and you'll have to repeat it again.
If all was OK hit ENTER and the standard "PDA Phone ROM Update Utility"
window will start, allowing you to flash HardSPL on your device.
Hit CTRL+C to Cancel or ENTER to continue...
Follow the steps on the wizard to flash HardSPL, when finished your
device will reboot. It should last no more than 1 minute.
- Launching RUU, please wait...
Process is finished, congratulations!

I see what you are saying. So some how I managed to just flash on the JumpSPL, and bypass the last steps of flashing HardSPL?
So now I should follow http://forum.xda-developers.com/showthread.php?t=354061
do step - "if you want to flash a hardSPL then run KaiserCustomRUU.exe from flash-hardSPL.zip on your PC"
or do you suggest i just try to install HardSPL over again.
damn i suck, i thought i was being careful.

try Hard SPL but follow the instruction and don't hurry wait for every message from that window
That thread is just in case your phone don't enter in bootloader

will do, thanks for your help!
its definetly not my first day using a computer, flashing ROMs, etc. damn i feel like a complete newb

hey it worked. thanks for your help. if you are ever in chicago, PM me. i owe you a few beers.

No problem .Glad can help.

Did I Brick my Kaiser ?

Hello all
I followed all the instructions as per the post " HardSPL will not install - WHITE SCREEN: SOLVED (UPDATE 01. March 2008)"
I upgraded the rom to Mobile Vista 1.1 and it worked fine. I then wanted to check out Laurentan's , Sleuth's and Dutty's Roms.
I Loaded the JumpSPL1.56-KAIS.exe on the Phone and proceeded to load L26_WM_6.1_PRO.V6. At 17 Percent I received an Error and went through the recovery process but afterwards it would would display tree color screen and as soon as i update it changes the screen to the white one with the p;rogress bar at the top. It however stays on 0 percent. I then tried to update via the Micro SD Card and it briefly displays the Tri color screen and then a white screen with Loading.... . It then remains there indefinitely
On the tri Color screen i have the following
Top Right RUUNBH
Left KAIS130
Left SPL-1.93.0000
Left CPLD-8

Mosquito007 said:
Hello all
I followed all the instructions as per the post " HardSPL will not install - WHITE SCREEN: SOLVED (UPDATE 01. March 2008)"
I upgraded the rom to Mobile Vista 1.1 and it worked fine. I then wanted to check out Laurentan's , Sleuth's and Dutty's Roms.
I Loaded the JumpSPL1.56-KAIS.exe on the Phone and proceeded to load L26_WM_6.1_PRO.V6. At 17 Percent I received an Error and went through the recovery process but afterwards it would would display tree color screen and as soon as i update it changes the screen to the white one with the p;rogress bar at the top. It however stays on 0 percent. I then tried to update via the Micro SD Card and it briefly displays the Tri color screen and then a white screen with Loading.... . It then remains there indefinitely
On the tri Color screen i have the following
Top Right RUUNBH
Left KAIS130
Left SPL-1.93.0000
Left CPLD-8
Click to expand...
Click to collapse
My suggestion would be to flash back to the original shipped ROM. Doesn't look like you have a HardSPL done. Anybody else have any input?

Thx All The Way
Can i load the original by renaming it to KAISIMG.nbh and running it from my SD card?
Is this the correct rom to load?
http://rapidshare.com/files/5781641....5_radio_sign_22.45.88.07_1.27.12.11_Ship.rar (64063 KB).
I just need to make sure I download the correct one as i have a really crappy internet connection and a download 60 Mb download wastes 5 hours
Thanks again
Mosquito

Mosquito007 said:
Thx All The Way
Can i load the original by renaming it to KAISIMG.nbh and running it from my SD card?
Is this the correct rom to load?
http://rapidshare.com/files/5781641....5_radio_sign_22.45.88.07_1.27.12.11_Ship.rar (64063 KB).
I just need to make sure I download the correct one as i have a really crappy internet connection and a download 60 Mb download wastes 5 hours
Thanks again
Mosquito
Click to expand...
Click to collapse
I would say that's correct but do you remember what ROM version / radio who had when you received the phone.

No unfortunately I don't. I had fingers in first and brains in neutral when the downloads finished

Mosquito007 said:
No unfortunately I don't. I had fingers in first and brains in neutral when the downloads finished
Click to expand...
Click to collapse
Try flashing to the ROM you posted via your SD Card.

Thank for the help. The Kaiser Lives again. I understand that if i dont Hard SPL I have to Load an Image and before I can load the next cooked Image I have to revert back to the original and then only load the next Cooked one.
Cheers
Newbie - On a learning curve

Click this thread, it worked for me!
http://forum.ppcgeeks.com/showthread.php?t=17623
Not sure if I'm allowed to link to another website but if it helps a fellow Kaiser user!
You need to download MTTY, then follow the instructions, if it works your Kaiser will reboot to the original ROM.
Good luck!

I wouldn't reccomend newbie to play with MTTY. It's a very dangerous toy to play with.
Read the follwoing thread" http://forum.xda-developers.com/showthread.php?t=372497&highlight=mtty
BE CAREFUL!
Amir.

holy crap, i have bricked my phone

i tried flashing a non-factory rom to my tilt. the steps i took are listed below.
tried the hardspl utility. got a white screen.
tried the hardspl utility for white screen devices. got the tri-color screen. yay.
ran the custom flasher that came with the custom rom i wanted to try.
got to 27% and stopped. it asked for a restart.
all subsequent flashes get to 0%.
went to the "how to revert" thread and grabbed the att factory rom.
ran the utility. utility returns "invalid vendor id" error.
my tilt shipped with 1.62.00, but the utility tries to install 1.57.502.2. does this matter?
how do i unbrick my phone?
--RC

rafadavidc said:
i tried flashing a non-factory rom to my tilt. the steps i took are listed below.
tried the hardspl utility. got a white screen.
tried the hardspl utility for white screen devices. got the tri-color screen. yay.
ran the custom flasher that came with the custom rom i wanted to try.
got to 27% and stopped. it asked for a restart.
all subsequent flashes get to 0%.
went to the "how to revert" thread and grabbed the att factory rom.
ran the utility. utility returns "invalid vendor id" error.
my tilt shipped with 1.62.00, but the utility tries to install 1.57.502.2. does this matter?
how do i unbrick my phone?
--RC
Click to expand...
Click to collapse
is your phone stuck at tricolor screen? If so tell me what it says.

{red band upper right corner}
RUUNBH
{red band lower left corner}
KAIS1*0
SPL-1.93.0000
CPLD-8
{green band}
{blue band}
{white band top center}
USB
--RC

rafadavidc said:
{red band upper right corner}
RUUNBH
{red band lower left corner}
KAIS1*0
SPL-1.93.0000
CPLD-8
{green band}
{blue band}
{white band top center}
USB
--RC
Click to expand...
Click to collapse
Looks like hardspl was never installed. Is your device stuck on that screen?

redbandana said:
Looks like hardspl was never installed. Is your device stuck on that screen?
Click to expand...
Click to collapse
I'd say Hardspl wasnt installed properly. Did you have enough battery life when you started the install of the rom? After a bad install of hardspl, I would ahve tried to reinstall it from the beginning again just to make sure you didnt have any problems. For now, try to pull up hardspl by holding in the power button/camera button (pressed really hard), and pressing the soft reset button in. If you do it right, the tri-color screen should come up. Then try reflashing hardspl if you can, or trying the rom again.
If that doesnt work, if you have At&t you can always connect it to a car battery and let it fry. Just don't cause any damage to the phone physically or with water. Otherwise, it doesnt matter.. you can warranty exchange it.

i followed the instructions for white-screeners.
copy 1.56, see if it white-screens. if it does, copy 1.93 and try again.
got the color bands? good. make the connection and flash away.
right?
--RC

rafadavidc said:
i followed the instructions for white-screeners.
copy 1.56, see if it white-screens. if it does, copy 1.93 and try again.
got the color bands? good. make the connection and flash away.
right?
--RC
Click to expand...
Click to collapse
you still need to install hardspl.

nimda0 said:
I'd say Hardspl wasnt installed properly. Did you have enough battery life when you started the install of the rom?
Click to expand...
Click to collapse
yes.
After a bad install of hardspl, I would ahve tried to reinstall it from the beginning again just to make sure you didnt have any problems. For now, try to pull up hardspl by holding in the power button/camera button (pressed really hard), and pressing the soft reset button in. If you do it right, the tri-color screen should come up.
Click to expand...
Click to collapse
doing this does exactly the same thing as simply applying power.
Then try reflashing hardspl if you can, or trying the rom again.
Click to expand...
Click to collapse
ok, this is probably where i'm not clear. i was under the impression that installing hardspl is as simple as getting to the tri-color screen without white-screening with one of the jumpspl files.
If that doesnt work, if you have At&t you can always connect it to a car battery and let it fry. Just don't cause any damage to the phone physically or with water. Otherwise, it doesnt matter.. you can warranty exchange it.
Click to expand...
Click to collapse
connect what to the car battery? the +/- contacts as illustrated on the phone battery?
--RC

redbandana said:
you still need to install hardspl.
Click to expand...
Click to collapse
as i stated, the thread isn't very clear on this. i tried running the hardspl utility, but it whitescreened. i ran the alternate one for white-screeners and it got me to the tri-color screen. what else is there?
i tried resetting the phone and rerunning the hardspl utility after successfully getting the tri-color screen, but it just whitescreened again.
--RC

rafadavidc said:
yes.
doing this does exactly the same thing as simply applying power.
ok, this is probably where i'm not clear. i was under the impression that installing hardspl is as simple as getting to the tri-color screen without white-screening with one of the jumpspl files.
connect what to the car battery? the +/- contacts as illustrated on the phone battery?
--RC
Click to expand...
Click to collapse
dude your phone isn't broken. you need to stop focusing on what is stated there and listen to what I am saying. You need to install hardspl. 1.93 is only if you were receiving a white screen. Install hardspl let me know what happens. I'll be up for another 1/2 hour customizing a rom.

The new SPL should work. I also got white screen with HardSPL and SPL. But the new one worked on my 2 new dievices.

xmoo said:
The new SPL should work. I also got white screen with HardSPL and SPL. But the new one worked on my 2 new dievices.
Click to expand...
Click to collapse
he can't flash with 1.93 it stalls at 0%. I was under the impression 1.93 is one of the original ATT spl's.

i'm sorry, i didn't mean i'm ready to run out and fry my phone right now, i'd rather fix it.
i guess i'm unclear on what it means to install hardspl. running the .exe from here just does nothing. is there something i'm missing?
--RC

rafadavidc said:
i'm sorry, i didn't mean i'm ready to run out and fry my phone right now, i'd rather fix it.
i guess i'm unclear on what it means to install hardspl. running the .exe from here just does nothing. is there something i'm missing?
--RC
Click to expand...
Click to collapse
Probably not Pof writes clear instructions. Follow his instructions to a T. Since you are receiving white screen follow jockey's instructions here:
http://forum.xda-developers.com/showthread.php?t=354061

ah, ok, see, this is where i have not been clear.
my phone boots to the tri-color screen and does absolutely nothing else. i'm stuck here, unless there's some magical button combination that will get me back into windows. i can't get it to boot to the operating environment.
--RC

Umm, can't you just soft-reset to get back to windows from where you are? No magic button combination needed.

soft-reset gets me back to the tri-color screen.
--RC

rafadavidc said:
soft-reset gets me back to the tri-color screen.
--RC
Click to expand...
Click to collapse
is your camera button stuck down somehow?

no, it was responding nicely earlier today, and i can also feel the distinctive two-click action now if i play with it.
--RC

rafadavidc said:
soft-reset gets me back to the tri-color screen.
--RC
Click to expand...
Click to collapse
ok this is what i originally asked "are you stuck at tri color screen?"
follow these instructions and stop ****ing yourself over by reading everyone's post at once: (who else helps n00bs at 5am)
First download attached file: Next follow these steps
1. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete)
kill two processes rapimgr.exe and wcescomm.exe
2. put your device into the cradle
3. Run mtty and Choose WCEUSBSH001 in 'PORT' (if it doesn't show then you didn't stop all active sync processes above!)
4. type "set 16 0" without the quotes to tell bootloader to boot the OS after reset. (for some devices it can also be "set 14 0")
5. type "task 8" to get your device formatted
6. type "task 0" to ask your device reboot
7. take the device out of the cradle, and manually reset it if it does not do that already.

Need help lease with the SPL

first of all thank you for everyone on this forum for their remarkable work.
ok first i might be a noob but i have read every single thread and still i cannot get it straight. i'm not a electonic user freindly
i need to get rid of the freeze that happens every 3-5 seconds and i read that i have to flasg spl, but which one? (attaching the files needed would be great as i don't know their name and they are similar so just tell me the name of the file)
ok, first of all i have no idea which sl i have as i did the SPL the first time using a file.exe which i cannot even remeber the name , so u tell me pls
when i go to boot loader mode i see this:
KAIS130 MFG
SPL1.0.olipof
CPLD-8
now i have death v3 and radio 1.65.20.29
just need a step by step and which file to use first and what to do in it , i have no idea what OEM means if you are gonna say install OEM
thank you so much, and i know it has been asked a lot but am a bit disabled so don't mind my idiocey
any help would be much apreciated.
P.S. i already read the fix freeze thread and i got lost

ahassouna said:
first of all thank you for everyone on this forum for their remarkable work.
ok first i might be a noob but i have read every single thread and still i cannot get it straight. i'm not a electonic user freindly ...
Click to expand...
Click to collapse
If you have read this thread completely and still don't understand what to do, then you probably shouldn't mess with it.
Honestly...this is the nicest response you are going to get

bengalih said:
If you have read this thread completely and still don't understand what to do, then you probably shouldn't mess with it.
Honestly...this is the nicest response you are going to get
Click to expand...
Click to collapse
hence why i started with a thank you cause i know someone will eventually say something really bad lol

See SPL.zip in the attachment, which is the SPL from the latest RUU_Kaiser_HTC_WWE_3.28.405.0_radio_sign_25.83.40.02_1.65.16.25_Ship, unzip it then you get RUU_signed.nbh and CustomRUU.exe.
Copy the SSPL-KAIS.exe to your phone (if you had to use the White Screen fix you'll need jwocky2001's JumpSPL1.56-KAIS.exe).
Run SSPL-KAIS.exe from your phone (or JumpSPL1.56-KAIS.exe, depending on your situation).
The Bootloader tri-color screen should appear.
Check SPL version number: if it ends in ".JumpSPL" then everything is fine.
Unplug the USB cable and re-plug it.
Run CustomRUU.exe to flash SPL.
After it's finished verify your SPL by holding down power and camera buttons while doing a soft reset. It should be SPL-3.28.0000.

This is all at your own risk, good luck!

Use at your own Risk!
bengalih said:
So how do I change my SPL?
I would like to make a few amendments/comments to his instructions based on my experiences. The first is that I have found that you don't need to remove you SIM card, but you do need to remove your SD card. The second is that JumpSPL1.56-KAIS.exe will probably not work, so just use JumpSPL1.93-KAIS.exe instead.
Also, step 4 and 5 are very important. Once you have launched JumpSPL you will see, after a few seconds, "USB" appear on the bottom white of the bootloader screen. If it doesn't show then either your device is not plugged into your USB port OR your SD card is still in the device. Remember that once is displays "USB" you want to unplug your USB connection and then reconnect it a few seconds later. No message will display when you plug your USB back in, and ActiveSync will not start (if it does start you should worry!) so assume that everything is ok and continue on.
Using the above procedures you should be able to flash between different SPLs with ease. To summarize I will go through the procedure I use to quickly flash between SPLs. Remember to read the above links first so you understand the tools and basic procedures:
Get the SPL file (in .NBH format) that i want to flash along with the KaiserCustomRUU.exe and put it in a folder on my PC. (just unzip ATT_19213_SPL_3.29.0000.zip)
Plug my device into my PC
Copy JumpSPL1.93-KAIS.exe to your device.
Take out my SD card
Run JumpSPL1.93-KAIS.exe on your device (click on the exe)
Wait for the bootloader screen (tri color screen) to appear and "USB" to show.
Unplug my device from the USB port, wait 5 seconds, plug it back in.
Run KaiserCustomRUU.exe (on your PC) and flash the SPL (in the directory where you unzipped ATT_19213_SPL_3.29.0000.zip)
Your done
Click to expand...
Click to collapse
THese files if using the V3.5 death rom
Use ATT_19213_SPL_3.29.0000.zip for step 1 and 8
Use JumpSPL1.93-Kais.zip for step 3
All of this information can be found in the very informative thread by bengalih found here http://forum.xda-developers.com/showthread.php?t=396235

IT actually appears that you have your SPL already HardSPL'd if you have:
KAIS130 MFG
SPL1.0.olipof
CPLD-8
Therefore you only need to pick the SPL you want and flash it. Now if you want to either change the radio, rom, or spl in the future, you would need to re-do the HardSPL.