I've tried several resets, I even restored a two day old backup made via spb backup and yes, have also gone into "connection setup" under connections and let it setup AT&T as my provider which subsequently asks for restarting the pda. Also, the HSDPA utility is still showing a check mark on HSPDA On.
All of the above have failed to get my phone back to 3G speeds. I've even tried to surf/download thinking maybe just the icon is showing "G" or "E" however its painstakingly slow now.
So, its either the "G" icon or "E" is what shows now. This all happened when I looked at my phone this morning after SPB backup had performed its scheduled backup that was triggered around 2:30am.
other than that... THIS IS AN AMAZING ROM BY DUTTYTHROY!! YOU RULE DUDE..
oh.. almost forgot: my radio is 1.27.14.09 which I've read that only works with the AT&T Tilt, which is what I have. Just an FYI.
Someone please help as I'm a heavy data user hence can't afford to be without 3G/HSDPA ... TY
AJ
ATT Blocking Unlocked Phones
The Folks at att are blocking unlocked phones fron the 3g and hsdpa network.
meyer1979 said:
The Folks at att are blocking unlocked phones fron the 3g and hsdpa network.
Click to expand...
Click to collapse
WTF... Thats messed up! I've had this problem just today though. Also, my Tilt isn't unlocked to the best of my knowledge.
Please - somebody tell me this isn't true!!!
meyer1979 said:
The Folks at att are blocking unlocked phones fron the 3g and hsdpa network.
Click to expand...
Click to collapse
Cite your sources.
I get 3G/HSDPA just fine on my Kaiser, whenever at&t actually built out some towers.
When I first tried this rom (radio 1.27.14.09) I lost all connection with AT&T but after several hours and traveling into another area everything seemed to fall back in place. I've also noticed that the phone is very slow to reconnect after passing through blacked out areas, not sure why other AT&T phones lose connection but come back online much faster.
Otherwise the ROM is great.
Is it possibly something to do with your rate plan?
EDIT: nevermind I'm using a diff rom I think
NuShrike said:
Cite your sources.
I get 3G/HSDPA just fine on my Kaiser, whenever at&t actually built out some towers.
Click to expand...
Click to collapse
Seems that there's a chance that this is true:
http://info-safety.blogspot.com/2007/12/at-blocks-unlocked-phones.html
http://www.digg.com/tech_news/AT_T_Blocks_Unlocked_Cell_Phones
I personally don't have any issues on the network. I'm running Dutty No.6 AT&T. Does this problem apply to a CID unlocked phone, a SIM unlocked phone, or both?
Regards,
Jeff
3G on/off
JohnnyGTO said:
When I first tried this rom (radio 1.27.14.09) I lost all connection with AT&T but after several hours and traveling into another area everything seemed to fall back in place. I've also noticed that the phone is very slow to reconnect after passing through blacked out areas, not sure why other AT&T phones lose connection but come back online much faster.
Otherwise the ROM is great.
Is it possibly something to do with your rate plan?
Click to expand...
Click to collapse
It shouldn't be my rate plan as I have the PDA unlimited for $39.99. Also, here's an update. This morning when I woke up my Tilt it was still showing E and my wishful thinking of Santa giving me a pre-christmas gift by fixing my phone (I'm easy) were just about drowned. ...however out of nowhere and without doing anything to the phone like soft-reset etc., the 3G icon came back and now its been coming back intermittently..
Now I'm pretty sure that its not that I'm traveling in a non-3G area and thats why its coming back intermittently as I live in a decent size metro area of Jacksonville FL and also because the areas I've been to this morning have always had 3G.. unless I'm wrong.. which I sure hope so..
BTW: I "downgraded" my Radio to 11.17 last night itself as one of the things I was trying to fix this issue. Just an FYI.
Here it is in a nutshell!!
Please note the following:
1) Got my new (unlocked) tytn II on dec 12.
*Sim in at 6:00pm. Had 3g & hsdpa till 10:00 pm. Went to bed.
*Dec 13th could not make calls or connect to data while on 3g.
*Calls would disconnect. Hsdpa message "the answering modem has disconnected "
* Switched back to gsm mode. Phone works but no 3g or hsdpa support.
*Dec 14 called att. Customer service said "unknown device" not supported.
*Transfer to data tech " Stated unsupported device" cant add the pda data package for $39.95. Stated my imei was blocked from 3g & hsdpa because of unlocked device status. But edge & gsm would work. Note edge & gsm modes work.
*Data tech said go to att store and get another branded att 3g device and use it to activate the pda data plan.
*I did this at 2:30 pm est. It worked for about 1/2 hour till 3:00 pm est. So much for my $39.95.
*Called att again & got a product support specialist(pr guy haha).he stated:
2) Att will not support an unlocked device.
*I said what about my $39.95???? I also said that i was a paying us att customer and was willing to pay for the high speed service. He said that they could no change my device unlocked status within the att network even though i was willing to pay for the data plan. I was pissed at that point. I told him that the hardware supports 3g & hsdpa and stated that att had locked a paying customer out of the 3g network. He said again "att does not support unlocked devices". I then asked him why i had access to the gsm & edge network and why att supported me on it and not 3g or hsdpa? I must have stumped him because he put me on hold. His reply after talking his boss was "att wil not support an unlocked device. We went back & forth like this until I Said "THIS IS BULLSHIP & HUNG UP.
* He call me back about an hour later because i threatened to switch back to verizon an stated " if you had the att original rom and if the phone was carrier locked it may change my device status" I said that I would give it a shot.
* Got the orig. att rom from here. Used sspl to apply cid per the reverting instructions. Phone said att 3g on startup & cid-8. Still no 3g. flashed hspl and bact to duttys rom 7.b for now.
In summary I can get the 3g & hsdpa signal but nothing works when connected! CAN YOU SAY CLASS ACTION LAW SUIT!!!
3G Test on AT&T network
How can we test if we are getting 3G speeds after changing our ROMs? I see the 3G and H logo's but don't think I'm getting the speeds.
Does changing the ROM unlock our AT&T phones?
Is there a ROM that is transparent to AT&T and allow us to use the 3G speeds?
Will reverting back to the AT&T Rom allow us to get the 3G speeds again?
newbie
Are you on drugs? , AT&T unlocks their phones, that does not matter , the reps you were speaking with are retarded they use a BILLING SYSTEM called TELEGENCE if you enter a IMEI wrong or of a unlocked device it gives back a UNKNOWN device message which means pretty much the reps can and if they dont want to , wont help you get your data working because they are lazy as ****. they do not block data on phones nor can they monitor your device to know what you are doing. their HLR's are only one way addressable.
Ok, I just upgraded to this ROM (cus duttys roms are amazing) after I read your post and...
I ran into some connection problems after my programs started looking for "my ISP" (isp.cingular) instead of "MEdia Net" (wap.cingular) In "advanced settings" in "connections" I re-set programs to run off MEdia Net, and it seems all is well
I think it might have switched when I was screwing with the comm manager and turned G3 off
DISCLAIMER: I'm a noob so take my advice with a grain of salt haha
No probs w/ ATT
My unlocked phone works just fine on the ATT network and i constantly get 3G UMTS and HSDPA speeds. Att does not block any device you are able to use on their network as they have roaming contracts with cell phone service providers across the world. If your device does not receive 3g speeds you can have your imei number added to the ATT allowed database just call 611 from your phone and talk to the service rep. If they give you any problem then call back and tell them you want to add the imei number of a wireless data card for computer and they will add that for you.
Must have been smoking the glass pipe!
Sorry folks.
This is a reception problem for me.
ATT really jerked me around.
The problem is a weak 3g signal.
If i dont have four bars 3g & hspda fail.
I went & sat under an att tower and everything works.
As soon as I drive away from the tower and the signal strength drops I loose 3g calling & Hsdpa.
Is there a fix.
trick420 said:
Seems that there's a chance that this is true:
http://info-safety.blogspot.com/2007/12/at-blocks-unlocked-phones.html
http://www.digg.com/tech_news/AT_T_Blocks_Unlocked_Cell_Phones
I personally don't have any issues on the network. I'm running Dutty No.6 AT&T. Does this problem apply to a CID unlocked phone, a SIM unlocked phone, or both?
Regards,
Jeff
Click to expand...
Click to collapse
How about this quote straight from the at&t CEO?
http://www.engadget.com/2007/12/06/atandt-claims-completely-open-network-too-the-most-open-eve/
Digg and random bloggers aren't really a good source. I remember the bullfrap article on Digg about Hummers being more environmentally conservative over a lifetime than any other green car.
have you tired having your sim card replaced? I had a similar issue where i was not able to call or receive calls in 3g but could on edge for a good day. Went to ATT and found out that others were having same issue with kraiser had them replace my sim card and everything worked great after.
Got 3G back and for good.... so far!
jellorice said:
have you tired having your sim card replaced? I had a similar issue where i was not able to call or receive calls in 3g but could on edge for a good day. Went to ATT and found out that others were having same issue with kraiser had them replace my sim card and everything worked great after.
Click to expand...
Click to collapse
thanks for the tip jellorice.. I actually got my 3G back since yesterday and its been working great ever since. As for the sim being faulty, Thats something I didn't even think of and now that you've mentioned it, I'll keep in mind for future troubleshooting as I'm sure some other issue will crop up.
Nevertheless, Dutty's ROM 6 is UNBELIEVABLY AWESOME!!! I'm sure Dutty's gotten numb to all the kudos he's got and still is getting, being in Gazillions... but I wish I had better words to describe this ROM as for someone like me who is virtually bringing food on the table because of the Tilt (heavy business user), the key strengths of his ROM are just Marvelous.
Sry for getting sidetracked.. I got a little exited there.
Related
Hey guys. This is a last attempt at fixing this very annoying problem. All the searches I have done don't seem to leave anywhere. So here's the situation:
I bought a Chinese clone phone (Sunno HDi - clone of HTC T8282). The phone comes with WM6.5 [5.2.23037 (build 23037.5.3.0)]. Overall the phone works great, and I have done a couple of YouTube videos on it.
But anyway - the really annoying problem is that from day 1 the phone has always shown that I'm roaming. I always get the little roaming triangle, which in turn makes several applications complain about roaming charges, blah blah blah. From my understanding, roaming is a feature of what's stored on the SIM card, and the info being pulled in from the tower. I have my T-Mobile SIM card in the phone, and I put up all T-Mobile networks I could find on the top of my preferred network list. What am I missing?
*Any* help will be greatly appreciated!
bipinsen said:
Hey guys. This is a last attempt at fixing this very annoying problem. All the searches I have done don't seem to leave anywhere. So here's the situation:
I bought a Chinese clone phone (Sunno HDi - clone of HTC T8282). The phone comes with WM6.5 [5.2.23037 (build 23037.5.3.0)]. Overall the phone works great, and I have done a couple of YouTube videos on it.
But anyway - the really annoying problem is that from day 1 the phone has always shown that I'm roaming. I always get the little roaming triangle, which in turn makes several applications complain about roaming charges, blah blah blah. From my understanding, roaming is a feature of what's stored on the SIM card, and the info being pulled in from the tower. I have my T-Mobile SIM card in the phone, and I put up all T-Mobile networks I could find on the top of my preferred network list. What am I missing?
*Any* help will be greatly appreciated!
Click to expand...
Click to collapse
i don't have tmobile, but on verizon we have to do an ota update (*228).. does tmobile have anything like that?? if so, did u try it?
ShakespearesEdge said:
i don't have tmobile, but on verizon we have to do an ota update (*228).. does tmobile have anything like that?? if so, did u try it?
Click to expand...
Click to collapse
That option in Verizon updates the PRL on the phone (preferred roaming list), which is a feature of CDMA phones. GSM phones do not have to do this. Well.. they should not have to... In either case, there isn't such an option on T-Mobile. That's why I'm wondering if this is something hard-coded in the ROM.
Thanks for the tip, though. Every little bit helps in getting rid of this annoyance!
bipinsen said:
Hey guys. This is a last attempt at fixing this very annoying problem. All the searches I have done don't seem to leave anywhere. So here's the situation:
I bought a Chinese clone phone (Sunno HDi - clone of HTC T8282). The phone comes with WM6.5 [5.2.23037 (build 23037.5.3.0)]. Overall the phone works great, and I have done a couple of YouTube videos on it.
But anyway - the really annoying problem is that from day 1 the phone has always shown that I'm roaming. I always get the little roaming triangle, which in turn makes several applications complain about roaming charges, blah blah blah. From my understanding, roaming is a feature of what's stored on the SIM card, and the info being pulled in from the tower. I have my T-Mobile SIM card in the phone, and I put up all T-Mobile networks I could find on the top of my preferred network list. What am I missing?
*Any* help will be greatly appreciated!
Click to expand...
Click to collapse
When I signed up my Sunno today with T-Mobile, I spoke with the representative about T-M's lack of coverage in my state which is one of the largest. While the competitor ads make T-M's 3G coverage look small, their actual coverage is probably about double that but still considerably smaller than most other carriers'.
The rep said not to worry as T-M has standard cellular agreements with the other carriers to allow phones attached to T-M to roam. He said that depending on where I live or travel, I could probably see the roam signal quite a bit but not to worry about it because I am on T-M's prepaid plan and roaming means no increase in my per minute charge.
To tell you the truth, I could care less about what symbol is displayed as long as I have cell coverage.
First allow me to say that I wish my first post was not a question, but a helpful comment to someone who needs it...yet trouble has found me and I can't seem to figure this out on my own and really need someone who has the skills and experience.
I know the phone is OLD and should be retired as it is nearing the EOL of its' technology, but I just can't afford to spend the money on a new one right now.
History of the phone is:
Bought new in late 2011, carrier Metro PCS, rooted on the second day of ownership.
Rom'd on the third day with GSE, used that for a while then went over to Black Plague.
Used phone this way for the entire time.
Always kept drivers installed on my Windows PC, 7x64.
A little over a week ago I had some driver issue which caused me to re-download the drivers. After I re-installed them I connected the phone and ran the LGMST. It brought me from the ZVD to ZVE without incident.
Phone has not had data service since.
I phoned Metro PCS distributor help line at 800 901 6266 and spoke to someone who tried to help a bit. They did an OTA push then had me try to re-provision the phone with the *228, no go...
I checked through the web for help, reading many posts about APNs, using Any Cut, located my access pin for the service menu. (didn't make any changes for fear of making things worse)
Then I brought the rooted phone into a Metro store I frequent and asked one of the associates who does this stuff on the side to help me out. He spent about fifteen minutes with the phone and told me he couldn't figure out why it wasn't working.
When I got home, I emailed PG about the issue hoping he could offer some advice. He told me to try TOT downgrading. He provided a few links and I set out to DG with TOT.
The LGNPST didn't install. (received error code 2203) tried a couple other downloads of the LGNPST but all fail with the same error. (I am admin, took ownership of files, edited security of folders as described in some forums from Microsoft about the error code and even tried letting windows install with compatibility settings, but darn thing just won't install)
I then figured I'd try un-rooting and a factory reset. t un-rooted fine and reset to stock, but still not an iota of data 4g,3g, or 1g to be found. (everything else works fine)
I then re-rooted the phone and tried L-Drifta's rom for ZVD Number Two.
It installed fine and works good, except for YouTube force closing all the time, but still no data service.
Does anyone have any idea what happened to this phone? If not, then how about someone helping out with how to manually program the radio part of the phone for service.
Thanks to everyone
CDMA Only selected
Update - - -
So I mustered up the nerve to mess with the network settings in the Metro hidden menu and changed it from CDMA & LTE Hybrid mode to CDMA only and have 3G back, but when I change it to LTE or keep it in Hybrid Mode I loose all data service.
I know I shouldn't keep playing around with the settings, but I just can't leave it alone now that I made some progress. It's like a gnat that I gotta keep swatting until it is gone for good.
Anyone have suggestions for getting my 4G service back?
LG MS910 losing 4G and switching to 3G then no data at all!
Device: LG MS910
Carrier: MetroPCS
Issue: No data
I have a cardinal rule with my phone: "Never use WiFi". WiFi networks are bay nature unsecure. I went to Starbucks and decided to connect to WiFi since I only had 1 bar. The area had poor network coverage.
Now my phone starts in 4G, goes to 3G, then no data after that. 5 minutes later the 3G returns. Data speeds are ZERO!
I've been with Metro long enough to know 1xRTT is faster than ZERO data. Did I get an sms trojan? Is MetroPCS messing with the network with no notification to customers?
For data, the LG MS910 has CDMA (1XRTT, EDVO) and LTE (4GLTE) radios. Why is the 3G icon appearing? The LG MS910 on MetroPCS technically isn't capable of T-Mobile's HSPA+ which uses a GSM signal. Regardless if T-Mobile and MetroPCS have merged, T-Mobile is a GSM carrier and therefore MetroPCS customers wouldn't benefit from T-Mobile's HSPA+ network anyway.
Bottom line: Something isn't right. Any ideas?
Anxiously awaiting the bloatwarefree Nexus 5.
Well my contract ended today, so I decided to jump ship to AIO Wireless... Since T-Mobile is getting rid of their grandfathered plans and making people upgrade, I decided to leave, and join the Pre-Paid community :victory: -- Cant wait until the Nexus 5 drops haha..
I'm SuperCID'd sim unlocked (did it last night), rooted (been rooted for years, the sensation is not my first rodeo), and all that Jazz...
Anyways.. I did everything that I was supposed to get everything activated and working.. typed in the new APN settings and got my data working and all..
My problem is that i do not get connected to 3g or 4g... I called CS and they said that everything looks fine.. (they dunno whats going on).. go figure.
I have 2g. Its pissing me off...
Just wondering if anybody else made the switch and are having/had similar problems??
Thanks
EDIT: Well i called back hoping to get another person to talk to.. and that somebody told me that since my phone is from T-Mobile, I wont be allowed to use their 4g.. --- My question is now this -- Since my phone is unlocked, wouldnt i now be able to use AT&T's network?? Or is the phone itself still required to use TMO's frequency? I'm confused.
EDIT 2: Did more research around xda and found that i could change the modem to att's frequency bands.. I flashed the modems via terminal emulator and even put in canadian radios.. well, both didnt work. when i flashed the modems, they didnt change the bands.. I would need the international sensation that uses att bands for att to work (thats why i flashed the canadian radio just to see if that would work) This is probably why we dont hear anything about our tmo sensations getting used on other carriers because no one has successfully changed the modem.. We cant change the bands that our phone comes with.. Damn.
Well, I guess i have to live with 2g for a week or so until the nexus 5 drops.. Then i can just slap my sim card in there and experience LTE ) -- but in the mean time, ill be using wifi.
I seem unable to get LTE on my D850 since I installed CM12.1 and was wondering if this is common for this ROM. I installed the nightly, so I assume its obviously going to be a bit buggy, but to not have LTE working seems strange.
I checked my APN and I tried both ATT LTE and ATT Phone. The ATT LTE gives me a status bar with an exclamation point and never establishes a data connection and ATT Phone gives me HSPA connectivity. At one time, I waited a few hours and it eventually established LTE but that was an uncommon occurrence and its never been repeated since.
With other ROMs I have not seen this issue replicated. I tested on Cyanide L, Euphoria, and the Stock LG ROM and everything worked fine. Any suggestions?
Hey there,
I'm running CyanideL myself, love this ROM.
Which nightly version are you using?
Have you checked that Mobile Networks --> Preferred network type.... is set to LTE?
Have you tried toggling to 3G, getting a connection, then moving back to LTE?
I also have this problem. Has a solution been found?
I just ditched the stock ROM and installed CM12.1 a few days ago. Now LTE has disappeared. I had it, now can't get it. I'm not able to select LTE in the settings→Mobile networks→Preferred network type menu, nor can I select any option that includes LTE in the test menu (*#*#4636#*#*). It's probably some stupid user error, but whatever it is has been eluding me for a day of messing with it.
Presently running cm-12.1-20150804-NIGHTLY-d850.
wseverin said:
I also have this problem. Has a solution been found?
I just ditched the stock ROM and installed CM12.1 a few days ago. Now LTE has disappeared. I had it, now can't get it. I'm not able to select LTE in the settings→Mobile networks→Preferred network type menu, nor can I select any option that includes LTE in the test menu (*#*#4636#*#*). It's probably some stupid user error, but whatever it is has been eluding me for a day of messing with it.
Presently running cm-12.1-20150804-NIGHTLY-d850.
Click to expand...
Click to collapse
Interesting...
Have you tried restoring your stock ROM and seeing if it will connect? How about a SIM card pull?
Have you tried restoring your stock ROM and seeing if it will connect? How about a SIM card pull?
Click to expand...
Click to collapse
Thanks for the reply. I have not tried returning to the stock ROM. I just got all my apps reinstalled and data restored, widgets installed, screens set up, etc., so I'm not too keen on doing all that again so soon.
I have tried a chicken SIM card pull. I was somewhat fearful of doing a pull "hot" as is usually suggested. I powered down, removed the SIM card, and restarted. After restart, I was able to select LTE in the settings→Mobile networks→Preferred network type menu, and the test menu confirmed that LTE/GSM auto was the preferred network type.
I then powered down, re-installed the SIM, and restarted. After restart the preferred network type had been reset to 3G and I was (am) unable to select LTE.
My conclusion is that this is something to do with the Net10 SIM I'm using. I've ordered a new SIM from Net10. The Net10 rep says a new SIM may fix things. One is on it's way and should be here in a few days. I'll post the result.
[SOLVED]
My new "LTE capable" Net10 SIM arrived today. I had Net10 customer service transfer my service to the new SIM. Now I have LTE; I'm able to select LTE in the Settings→Mobile_Networks→Preferred_Network_Type menu, LTE appears in the CM12.1 status bar, and I'm able to make a solid LTE connection.
I will here piece together everything I've learned from my own experience, Net10 customer support, and internet searching. My conclusion is that there are TWO compounding problems for Tracfone/Net10/StraightTalk users. One is techhnical and the other is marketing.
The technical issue is that all Net10 (also Tracfone and Straight Talk) AT&T SIMs sold up to a couple of months ago don't work with LTE on the AT&T network. That's most of the AT&T SIMs from these companies out there in the world today. This is not widely known – in fact, most of the Net10/TF/ST customer service reps are not aware of it. It's not something that Tracfone and its subsidiaries want known because it would cost them a bundle replacing SIM cards for unhappy customers. If you have a Net10/TF/ST SIM that's more than a few months old, you have to call Net10/TF/ST and buy another new one that's compatible with AT&T LTE if you want LTE service.
So, why don't more Net10/TF/ST AT&T users raise a fuss and demand LTE capable SIMs? That brings us to the marketing issue.
AT&T lies. So do Tracfone and its subsidiaries. AT&T markets its HSPA+ 3G service as 4G when it's not. In fact, the AT&T stock ROMs that most people are using lie. The stock ROMs display 4G or sometimes 4GLTE (depending on ROM version) in the status bar when in fact it's a HSPA+ connection; not 4G let alone LTE. So users cruise along using their old SIM cards happily thinking they have 4G or LTE connections when in fact they do not; and they're none the wiser. It's only more sophisticated users who flash a 3rd party ROM, one that doesn't lie, who figure it out.
(solution cross posted to similar thread at http://forum.cyanogenmod.org/topic/113404-cant-select-preferred-network-type-lte/)
So having recently upgraded from an unlocked T-Mobile device running on ATT, I was expecting that I would have better connectivity since the T-Mobile device I had didn't have support for a lot of bands. However I haven't had data work at all since setting up this phone.
Full disclosure, I'm on blackwireless. But it's an ATT mvno so I should still get their network.
But I'm getting zilch.
Talk and text are just fine, just no data.
I'm also not fully used to the interface on this phone cause my old one had actual "bars" in the icon and would also say LTE or 4g. Maybe both, is it sad that I've already forgotten just three days into owning a op7?
Firstly, anyone else an blackwireless, or ATT having issues with data?
Haven't yet called blackwireless because their support is 100% outsourced.
Had same with T-Mobile, it wanted me to sign in...and that page said this plan has no internet. So I called support, they ran a diagnosis but before it could finish ! Near the lte disappeared and it worked
RobbieRobski said:
So having recently upgraded from an unlocked T-Mobile device running on ATT, I was expecting that I would have better connectivity since the T-Mobile device I had didn't have support for a lot of bands. However I haven't had data work at all since setting up this phone.
Full disclosure, I'm on blackwireless. But it's an ATT mvno so I should still get their network.
But I'm getting zilch.
Talk and text are just fine, just no data.
I'm also not fully used to the interface on this phone cause my old one had actual "bars" in the icon and would also say LTE or 4g. Maybe both, is it sad that I've already forgotten just three days into owning a op7?
Firstly, anyone else an blackwireless, or ATT having issues with data?
Haven't yet called blackwireless because their support is 100% outsourced.
Click to expand...
Click to collapse
Have you looked at your APN settings?
Sometimes it just doesn't select anything or it's empty!
You're right. That was the exact problem. I ended up calling the support line and it was a much better experience than I remember. And there were several apn to choose from. I just had to choose a different one according to their documentation.
Global version works just great with AT&T, no need to get tmo phone that just makes it more of a pain int the ass to go through the unlock process
Bradl79 said:
Global version works just great with AT&T, no need to get tmo phone that just makes it more of a pain int the ass to go through the unlock process
Click to expand...
Click to collapse
I know. What I meant was my old phone was T-Mobile. My op7 I bought direct from OnePlus.com