ROM upgrade question - XV6700, PPC-6700 ROM Development

I'm new, so forgive my ignorance, but how do I figure out what ROM version I have on my Sprint 6700? How do I know if I have stereo bluetooth and if I don't how do I get it? What is the most current ROM version?
I purchased the unit new in Nov 06.
Thanks

a2dp
The rocket scientists at sprint are only on AKU2. A2DP is not included until AKU3+. Luckily there a a lot of smart people here an in the community who are intersted in it and have figured it out.
Try searching on A2DP for starters.
These sites also have information. Dont use it myself. Good luck.
www.ppcgeeks.com
www.ppc6700users.com
dt29332 said:
I'm new, so forgive my ignorance, but how do I figure out what ROM version I have on my Sprint 6700? How do I know if I have stereo bluetooth and if I don't how do I get it? What is the most current ROM version?
I purchased the unit new in Nov 06.
Thanks
Click to expand...
Click to collapse

Related

AT&T Fuze

I've had TONS of PM's recently (12 in the 3 days I was in VT) so I wanted to clear some things up and answer a few questions.
1) ROM DUMP... The ROM incognitho posted is the one on my Fuze, same radio and everything. If that doesn't give you 3G, no ROM/radio will.
2) MMS... Your Raphael automatically obtains the same settings as mine for MMS, if it doesn't work, fix it through AT&T.
3) Software/hardware capabilities... The G-sensor calibrator, FM radio and TV out all function completely after the software was installed. Thanks to sub69 and schaps.
Any more questions so my PM box stops overflowing?
Keep negativity elsewhere as I'm already on thin ice, I'll answer anything I can but once the mudslinging starts this thread is gone.
I'm afraid that black may be right on the 3g in the US. If his rom & radio don't give the UK touch pro 3g in the states, I really don't know what else can be done to open it up as that rom/radio do enabe the 3g on his touch pro. I really do hope I'm wrong as I currenly have a UK touch pro in the US but when the fuze comes out I know I will have no problem selling it and I'll just get the Fuze. It's a shame because I think I would like the layout of the UK keyboard better than the Fuze. Only time will tell I guess.
Well, I can't say I know that the hardware is different (nix the keyboard/camera/etc), but I do know my phone works flawlessly on 3G/HSPA with the currently available radio/ROM. I'm sorry to hear people have tried this with no success, as that means many people have wasted a grand for no 3G. :-(
Black93300ZX said:
I've had TONS of PM's recently (12 in the 3 days I was in VT)
3) Software/hardware capabilities... The G-sensor calibrator, FM radio and TV out all function completely after the software was installed. Thanks to sub69 and schaps.
Click to expand...
Click to collapse
I haven't read the forum much lately,,,,,, but is that right? The AT&T Fuze is going to have FM radio?
jamespaulritter said:
I haven't read the forum much lately,,,,,, but is that right? The AT&T Fuze is going to have FM radio?
Click to expand...
Click to collapse
The software wasn't installed, but after sub69 did me the favor of extracting the FM radio files from his Touch Pro and putting them into a CAB, it works perfectly on my Fuze. Same applies to TV-out, software wasn't there, but after installed it works mint.
any word if this rom works with hermes? prob not fm radio if so huh.
thodge21 said:
any word if this rom works with hermes? prob not fm radio if so huh.
Click to expand...
Click to collapse
Are you talking about the AT&T Fuze ROM? If you are, then no that ROM will brick the hell out of your phone if you try it. Stick to the Hermes forum for Hermes ROMs
thodge21 said:
any word if this rom works with hermes? prob not fm radio if so huh.
Click to expand...
Click to collapse
No, the ROM wont work straight out. It would have to be ported to work on the Hermes. There was one ported for the Kaiser (IBI) but i don't think anything for the Hermes was released.
oops i meant kaiser, i sold my hermes.
thodge21 said:
oops i meant kaiser, i sold my hermes.
Click to expand...
Click to collapse
lol well that makes more sense
There was a Cab
to Fix the Yellow Photos
Anyone ?
Can we change background picture in touch pro (not only for home)?
Can we have different backgrounds for each ?
How to do that Please

FM Radio on Sprint Touch Pro/Diamond

So thus far there is no FM radio cab on the Touch pro from sprint.
If you are interested in the sprint diamond, there is a fix for that in the diamond forums both here and at ppcgeeks.
If you are interested in a fix for the Fuze:
http://forum.xda-developers.com/showpost.php?p=2692292&postcount=204
from what i under stand that works..
For a current discussion of the FM radio on the Sprint Touch Pro:
http://forum.ppcgeeks.com/showthread.php?t=49654
wont flashing a different ROM do the trick?
RavenY2K3 said:
wont flashing a different ROM do the trick?
Click to expand...
Click to collapse
I don't think there is a rom out there yet for the Sprint Touch Pro - it's a CDMA phone so none of the existing roms will work on it (I assume?).
Any luck with this anyone
no luck
Just loaded the cab i found in one of the threads. installed on my sprint touch pro and loaded fine. but would not play. I think they removed the hardware.
benthere06 said:
Just loaded the cab i found in one of the threads. installed on my sprint touch pro and loaded fine. but would not play. I think they removed the hardware.
Click to expand...
Click to collapse
Did you have headphones plugged in? On the Fuze I had to install the cab and plug the headphones in before the program would run because it uses the headphones as an antenna.
yeah i plugged them in. it did say i needed to do it before hand but no luck, just shows that little colorful circle waiting icon. I assume it is searching for a signal or something and then will just sit there and nothing works. Maybe that is why the unit is a smidge smaller than the gsm version.
Same thing here, app installs fine but doesn't do anything.
same here but how about the headphones with built in fm radio antenna has anyone tried those and see if it works?
leoiden said:
same here but how about the headphones with built in fm radio antenna has anyone tried those and see if it works?
Click to expand...
Click to collapse
It shouldn't matter. On the Fuze I just plugged in a pair of iPod earbuds and the FM radio worked great.
Don't want to kill the buzz, but my understanding is that Sprint took it a step further than AT&T and neutered the phone to remove the radio chip so there is no software solution...
bugsykoosh said:
Don't want to kill the buzz, but my understanding is that Sprint took it a step further than AT&T and neutered the phone to remove the radio chip so there is no software solution...
Click to expand...
Click to collapse
I don't think so. They took the same exact hardware that AT&T did except that the mold is different (appearance). It is probably only restricted by software. Try installing the cab for the fm radio. It could possibly work.
I installed the cab and it wouldn't work on my sprint touch pro.
Kraize92 said:
I don't think so. They took the same exact hardware that AT&T did except that the mold is different (appearance). It is probably only restricted by software. Try installing the cab for the fm radio. It could possibly work.
Click to expand...
Click to collapse
I installed the FM Radio App on my Touch Pro and, with the headphones plugged, the app starts, waits for a little bit, and then I get an "Unspecified Error".
Do we know for a fact that the FM circuitry has been removed? Is there a driver that needs to be installed in Windows Mobile? Could the radio be re-enabled via a change in the firmware?
Chris
dunawayc said:
I installed the FM Radio App on my Touch Pro and, with the headphones plugged, the app starts, waits for a little bit, and then I get an "Unspecified Error".
Do we know for a fact that the FM circuitry has been removed? Is there a driver that needs to be installed in Windows Mobile? Could the radio be re-enabled via a change in the firmware?
Chris
Click to expand...
Click to collapse
It could be the FM Radio is specific to the GSM versions of the phone. But we need a tech person to prove that.
im curious to see what the answer to this question is. i would like to have fm radio in conjunction to my sirius subscription
Kraize92 said:
I don't think so. They took the same exact hardware that AT&T did except that the mold is different (appearance). It is probably only restricted by software. Try installing the cab for the fm radio. It could possibly work.
Click to expand...
Click to collapse
I wouldn't say that. Along with changing from GSM to CDMA cellular radios they could have changed virtually anything. At this point there is no telling wether the hardware is present or not. I'd love an FM radio on my Sprint Pro, but I'm not too optimistic.
I wanted the radio, too. But as a pratical matter, I doubt it would have worked too well unless you were right on top of the station. I find I can listen to most of the radio I want using Kinoma's media guide. It's wonderful. I'm still hoping someone discovers a way to activate the radio. How ignorant of Sprint to disable it.....
Why is it always SOMETHING with every Sprint phone? Why do they always have to disable something? What good does it do them to disable the FM radio?
bigray327 said:
Why is it always SOMETHING with every Sprint phone? Why do they always have to disable something? What good does it do them to disable the FM radio?
Click to expand...
Click to collapse
Well thats a no brainer there bud...if we all had the FM Radio working thanks to this new HTC Product..then Sprint would get there ass kicked in regards to their sprint store with the music downloads and all... It takes from their profitasbility for us to have the Built in FM Radio functioning.

Headset Not Function

Greetings, it's my first post on Raphael's thread, i had bought second hand Touch Pro T7272, and start flashing hardSPL to get further action safe, but i forgot to try headset function, when i connect it and try to play a song, sounds was still generated by internal speaker, and then try on FM mode, still the same, i didn't hear anything from my headset. When i try headset on my Hermes, it working properly. I wonder was this any relation with hardSPL, or was there any hardware problem (cut-off track etc.), and one thing i also try to charge with USB, it's working.
Hoping some advices, thank You..
Need help here
Congrats and welcome to Raphael world! Have you tried flashing Radios?
Are you using bluetooth or wired headphones with the USB adapter?
Hello Sir u2pop and Sir ryotgz,
Thank You
I allready reflash it with stock ROM and nothing help, and finally i brought it to service center and found that I/O port was broken because of water, change it and horraaay it's working now.
Thanks a lot for Your attention Sir
erwinpiero said:
Hello Sir u2pop and Sir ryotgz,
Thank You
I allready reflash it with stock ROM and nothing help, and finally i brought it to service center and found that I/O port was broken because of water, change it and horraaay it's working now.
Thanks a lot for Your attention Sir
Click to expand...
Click to collapse
Glad you found the cause. Anyway where did you send your unit? I was told that Sistech Kharisma dont carry HTC brand anymore?
u2pop said:
Glad you found the cause. Anyway where did you send your unit? I was told that Sistech Kharisma dont carry HTC brand anymore?
Click to expand...
Click to collapse
Salam kenal Mas , yes i brought it to Sistech Kharisma, Plaza Semanggi branch, it's served there, i also bought jack converter, dopod 838 pro stylus and touch pro's battery and lower case. Means, yes they still covering HTC's.

big problems with bluetooth and the car

Hey.
Had this phone for a week now and whilst it's a great phone, there appears to be a few bugs which need sorting. The main one is the incompatibility with the car for controlling apps like Spotify or streaming music via Bluetooth.
The later is a real pain and one which is causing me to seriously consider getting rid of this device as it's a killer feature for me due to the amount of driving I do.
Had a quick look at Talk Sony forum and a few other people have the same problem but as of yet there is no update or word from Sony.
Anyone else have the same experience and a potential solution?
Cheers
Scott
No solution, I got word from Sony that they are working on it, but my guess is that this will be fixed with Android O, and this could be months ahead :/
But maybe we will receive an update for Android 7, who knows...
Thanks for the reply. This kind of settles it then as Monday is last day of my cooling off period.. Gonna have to take it back as there is no way I can function in my job if I can t use handsfree properly or music
Such a shame.
had the same thing, after much research i found its probably the fact that the premium has bluetooth 5, with special codecs for music streaming. Non of which was available in 2012 when my car was made.
Ive ordered a £3 hadfree kit of ebay to see if that makes any difference.
leeston2379 said:
had the same thing, after much research i found its probably the fact that the premium has bluetooth 5, with special codecs for music streaming. Non of which was available in 2012 when my car was made.
Ive ordered a £3 hadfree kit of ebay to see if that makes any difference.
Click to expand...
Click to collapse
thats pants now
I was going to mess about to try and flash unbranded firmware but I think i will just take it back tomorrow and swap it .
Cheers for the update.
Scott
svssolutions said:
thats pants now
I was going to mess about to try and flash unbranded firmware but I think i will just take it back tomorrow and swap it .
Cheers for the update.
Scott
Click to expand...
Click to collapse
I was gonna do the same but the only offer they gave me was an s8 with less data for an extra £15 a month. I stuck with the Sony and am hoping when my new car arrives it works.
Good luck.
I have a new 2017 BMW and I am stunned that it doesnt work. The S8 works great and the iPhone is perfect but for some reason Sony have been left out in the dark.
svssolutions said:
I have a new 2017 BMW and I am stunned that it doesnt work. The S8 works great and the iPhone is perfect but for some reason Sony have been left out in the dark.
Click to expand...
Click to collapse
Spoke to Sony. They do believe their device is at fault and have no plans to do any software tweaks till Android O
I dont have any issues with mine controlling pause, play, last or next song, but I switched to Deezer a while back. Ive had more than one issue with Spotify on other devices, so I moved on from that service.
charlatan01 said:
I dont have any issues with mine controlling pause, play, last or next song, but I switched to Deezer a while back. Ive had more than one issue with Spotify on other devices, so I moved on from that service.
Click to expand...
Click to collapse
It's such a strange problem.
Hi guys goodevening I've solve this issue ! you just to go o dev menu anche change bluetooth version avrcp from 1.6 to 1.4 after that it will worck again with the idrive with any app.
I tried changing avrcp to 1.4 yet it still won't stream music at all to my alpine head unit.
Didn't even come up as an option under Bluetooth. Says it is connected for calls and contacts only.
The alpine works fine with galaxy note 2, 4, galaxy s5 and s8, Huawei y550. So the fault is with the xz premium.
Same Problem with Alpine and Bose. Solution?

Latest firmware and mcu for Seicane px5 mtce hf

Hello. I'm hoping to keep my unit as up to date as possible and wanted to ask if there any files compatible with my unit, and if possible, change the look of the ui too, because it looks super bland to me compared some of the ones I've seen online. I've only updated the firmware once when my seller gave me a file to fix the time issue I had when I first got the unit.
I currently have a Seicane unit for my accord 05.
The reason I'd like to update the mcu is in hopes that may be it'll help with displaying my climate controls. Maybe I'm off with that, but I'm still not able to figure out how to make it display on my screen.
I'm honestly sorry if this has been asked before, I just got overwhelmed with searching on my own in android auto, so I figured I'd ask directly.
Thank you guys.
What factory/mcu do you have. From that you can then decide options.
marchnz said:
What factory/mcu do you have. From that you can then decide options.
Click to expand...
Click to collapse
I took a pic of my system specs.
If you're referring to the manufacturer, I believe it's HF, so I haven't really found much for this specific firmware and mcu. Doesn't seem to be as relevant here unfortunately.
Be aware, your head unit may randomly get black screen issue. My HF headunit with 3.0x MCU had that issue.
You need to get your MCU updated to 3.30. You can get the MCU update here: mega.nz/#F!T1FgjA7A!wc9p40bocqCiBX8XPR50ig
Sorry, I don't remember where I found the link. It must be one of the sound patch thread. Credits goes to cs-x who did the sound patch, and the original thread owner.
chewybits95 said:
I took a pic of my system specs.
If you're referring to the manufacturer, I believe it's HF, so I haven't really found much for this specific firmware and mcu. Doesn't seem to be as relevant here unfortunately.
Click to expand...
Click to collapse
snailium said:
Be aware, your head unit may randomly get black screen issue. My HF headunit with 3.0x MCU had that issue.
You need to get your MCU updated to 3.30. You can get the MCU update here: mega.nz/#F!T1FgjA7A!wc9p40bocqCiBX8XPR50ig
Sorry, I don't remember where I found the link. It must be one of the sound patch thread. Credits goes to cs-x who did the sound patch, and the original thread owner.
Click to expand...
Click to collapse
Hi, I have the same exactly Seicane head unit as @chewybits95 (same MCU version and date, same 9" display)
Did one of you succesfully update your MCU HF 3.07 to 3.30?
Thanks.
themissionimpossible said:
Hi, I have the same exactly Seicane head unit as @chewybits95 (same MCU version and date, same 9" display)
Did one of you succesfully update your MCU HF 3.07 to 3.30?
Thanks.
Click to expand...
Click to collapse
Hello to everybody.
I've the same device from Seicane. for my Renault Koleos bought 2 months ago in Aliexpress. It came with version 3.30. The information of my device is
- Compilation rk3368
- Kernel 4.4.167 #176 Fri Nov 22 09:34
- Version MCU MTCE_HF_V3.30_1 aug 6 2019 11:08:02
- CPU Octa Core Cortex A53 1.5G
- Android 9. Screen resolution 1024*768. 9 " Screen
- Memory 3940 Mb
I've problems with microphone ( nobody can hear me when calling). I'm looking for an update. Does anyone can confirm if I can install one of the mod firmwares? I guess this should be compatible with PX5 firmwares, but I'm not 100% sure. Does anybody else has this problem with the microphone?
I haven't found any information in Seicane website. Their support is a disaster....
Punisher66 said:
- Version MCU MTCE_HF_V3.30_1 aug 6 2019 11:08:02
Click to expand...
Click to collapse
This is the latest available at least on the net.
There is also a V3.30 sound patched for better audio for units w/o a DSP:
dmcu(MTCE-HF-3.30sp+by+cs-x).7z
https://mega.nz/#F!T1FgjA7A!wc9p40bocqCiBX8XPR50ig?jhUEmAYD
For your microphone problem, try connecting an external one.
themissionimpossible said:
This is the latest available at least on the net.
There is also a V3.30 sound patched for better audio for units w/o a DSP:
dmcu(MTCE-HF-3.30sp+by+cs-x).7z
https://mega.nz/#F!T1FgjA7A!wc9p40bocqCiBX8XPR50ig?jhUEmAYD
For your microphone problem, try connecting an external one.
Click to expand...
Click to collapse
Thank you very much for your support. I'll try to update the device and to use the external mic. My concern is that volume of the microphone is adjusted to 0 and I haven't found how to change it ( even trying dozens of programs to test miccrophones). I'll try with external one.
Thank you again.
Hi.
Anyone know, or can you tell me who is the HF manufacturer?
The seller is Secaine, but he does not offer any information, nor does he provide any type of file for updating his devices.: eek:
Punisher66 said:
Thank you very much for your support. I'll try to update the device and to use the external mic. My concern is that volume of the microphone is adjusted to 0 and I haven't found how to change it ( even trying dozens of programs to test microphones). I'll try with external one.
Thank you again.
Click to expand...
Click to collapse
I've tried eternal mic via jack connector and I installed the update. Nothing changed. Nobody can hear me in Bluetooth calls and if I record the sound of the microphone, nothing appears.
I've entered in factory settings and I've seen I have Bluetooth device SD-BC6. I didn't found any option to increase the volume of the microphone. I'm installing programs to access to engineering mode ( I hope I could change the volume of the mic).
In parallel, I've bought in aliexpress an USB microphone, in order to have other input source. Let's see. If none of those test work, I'm thinking on install other firmware like hal9k and root my device.
I don't know what else to do.....
Any idea?
Punisher66 said:
if I record the sound of the microphone, nothing appears.
Click to expand...
Click to collapse
If you used a compatible electret condenser mic, in this case the problem has nothing to do with Bluetooth, so it may be a hardware issue.
themissionimpossible said:
If you used a compatible electret condenser mic, in this case the problem has nothing to do with Bluetooth, so it may be a hardware issue.
Click to expand...
Click to collapse
My guess is that mic volume is lowered to 0 I don't know why, since 2 independent microphones give the same result.
In other android 'phones' I entered in engineering mode and I was able to change this. This is the main option I'm looking for.
In parallel, a USB microphone (I'm waiting for it) would be a different sound source to try with ..... We will see which works
Did you factory reset the head unit?
After a factory reset the mic level should be reset as well.
Hello everyone. I received an updated Firmware directly from seicane for their head unit. This is Android 10 update for the 2/32 GB unit. Everything seems to be working great so far on unit. If you would like to try it for yourself please feel free to download and install. I'm not too tech savvy so if you have any questions I'll answer them the best I can. Thought I would share for anyone to update their own unit if possible
PLEASE BE ADVISED YOU USE THIS AT YOUR OWN RISK!
I will not be held responsible for any damages done to your own unit.
Thank you!
https://drive.google.com/file/d/1Q9ns_Nojpl-8WAIvqgd0DMklUZJsjt7p/view?usp=drivesdk
C75 said:
Hello everyone. I received an updated Firmware directly from seicane for their head unit. This is Android 10 update for the 2/32 GB unit. Everything seems to be working great so far on unit. If you would like to try it for yourself please feel free to download and install. I'm not too tech savvy so if you have any questions I'll answer them the best I can. Thought I would share for anyone to update their own unit if possible
PLEASE BE ADVISED YOU USE THIS AT YOUR OWN RISK!
I will not be held responsible for any damages done to your own unit.
Thank you!
https://drive.google.com/file/d/1My4VMd5K270qSfEnHauErffJEOS5fSLZ/view?usp=drivesdk
Click to expand...
Click to collapse
This is fake Android 10
I open the whole rom and it´s API 23 Android 6
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=MRA58K
ro.build.display.id=YT9218_00005_V004
ro.build.version.incremental=1569378556
ro.build.version.sdk=23
ro.build.version.preview_sdk=0
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=8.1Go
ro.build.version.security_patch=2017-11-05
jamal2367 said:
This is fake Android 10
I open the whole rom and it´s API 23 Android 6
Click to expand...
Click to collapse
Seicane was the one who give me this directly and said it was Android version 10. I haven't tried it myself because my radio is working smoothly right now. If it's not Android 10 I do apologise as I was told that is the version. I wouldn't lie about this because I have gotten so much from this forum and want to give back. As I said, seicane claim this is Android 10 version. I have the conversation to prove this if needed.
The end part of the title of the file already says it all: September 25, 2019.
It is obvious that something is wrong there.
acvaristul said:
The end part of the title of the file already says it all: September 25, 2019.
It is obvious that something is wrong there.
Click to expand...
Click to collapse
I honestly didn't pay any attention to the file name. I did mention it to seicane support team that this isn't Android 10 version. They are supposed to be looking into it and sending the correct version soon. I did notice that the specs on my unit is
AllWinner
Quad-Core T3 P1
Board: exdroid
GPU:Mali-400 MP
API:29
I found these online and I am running them on my Seicane PX5.
https://mega.nz/folder/C6Iz0AZC#4vU2rue99881X9MxDxz_YA
---------- Post added at 08:30 AM ---------- Previous post was at 08:29 AM ----------
This also has a new version of Zlink, which is why I updated
Some photos

Categories

Resources