Problem of unlocking CID in new dopod 818pro rom... - JAMin, XDA Neo, S200 Software Upgrading

I want to change the ROM from the lastest CHT ROM to the lastest ENG ROM. I know that I need to unlock the CID first, however, when I used aWizard 1.3 beta 2 to unlock it, it said that an internal error had happened and it had unlocked the CID sucessfully... :?:
Then I tried to use the lastest ENG ROM to update it, but it said invalid vender ID...
What's wrong with it? Thank You.

humanstick said:
I want to change the ROM from the lastest CHT ROM to the lastest ENG ROM. I know that I need to unlock the CID first, however, when I used aWizard 1.3 beta 2 to unlock it, it said that an internal error had happened and it had unlocked the CID sucessfully... :?:
Then I tried to use the lastest ENG ROM to update it, but it said invalid vender ID...
What's wrong with it? Thank You.
Click to expand...
Click to collapse
Read this thread: http://forum.xda-developers.com/viewtopic.php?t=49298&sid=35f5c1e9e165997b4634ea0c7700ac76

bambacik said:
humanstick said:
I want to change the ROM from the lastest CHT ROM to the lastest ENG ROM. I know that I need to unlock the CID first, however, when I used aWizard 1.3 beta 2 to unlock it, it said that an internal error had happened and it had unlocked the CID sucessfully... :?:
Then I tried to use the lastest ENG ROM to update it, but it said invalid vender ID...
What's wrong with it? Thank You.
Click to expand...
Click to collapse
Read this thread: http://forum.xda-developers.com/viewtopic.php?t=49298&sid=35f5c1e9e165997b4634ea0c7700ac76
Click to expand...
Click to collapse
Thank you very much!

Related

From AKU 3.2 to 2.3

I am using Prophet_WM5AKU3.2_v3221_lvsw_edition. What is the procedure of downgrade to others?
Install the offical rom first and then upgrade to others?
Thanks
should be someone experience on this but no one give me help...
xpking said:
should be someone experience on this but no one give me help...
Click to expand...
Click to collapse
if your phone is CID unlocked, its the same procedure as the upgrade.
just pick the ROM you like and downgrade
(might be smart to install the official Qtek 2.20 ROM first, and then install anything you like !
Jesterz said:
if your phone is CID unlocked, its the same procedure as the upgrade.
just pick the ROM you like and downgrade
(might be smart to install the official Qtek 2.20 ROM first, and then install anything you like !
Click to expand...
Click to collapse
Thanks. If i want to install the official rom again, should i just hard reset and install again? (my phone is CID locked)
How to recognize if your phone in CID locked or unlocked?
Thanks
Pepez said:
How to recognize if your phone in CID locked or unlocked?
Thanks
Click to expand...
Click to collapse
If you have not done anything, it should be CID locked...
xpking said:
If you have not done anything, it should be CID locked...
Click to expand...
Click to collapse
Surely u can downgrade as I was also using 3.2 but then decided to downgrade to 2.3 lvsw(latest one)...its irrespective of cid
locking...as i also have G4 device which is CID unlocked....
Procedure is quite simple...first downgrade to offcial WWE rom (older one) and then upgrade it from there...just follow what id described in this thread's first post...
http://forum.xda-developers.com/showthread.php?t=283965
I was also not sure abt this and I asked the same question here but didn't get any response so finally i took the courage to downgrade which went thru very smoothly...

INvalid Vendor ID error !!!!

Hey guys,
I am using a t-mobile MDA vario. I finally cid unlocked my wizard using WST 3. now my IPL/SPL is 1.05. now if I try to flash with T-mobile 2.26 shipped rom. It gives Invalid vendor id error. What to do now? How to update my IPL/SPL ??
Please help me.
devilmaycry5 said:
Hey guys,
I am using a t-mobile MDA vario. I finally cid unlocked my wizard using WST 3. now my IPL/SPL is 1.05. now if I try to flash with T-mobile 2.26 shipped rom. It gives Invalid vendor id error. What to do now? How to update my IPL/SPL ??
Please help me.
Click to expand...
Click to collapse
Your phone is still not CID unlocked.
There is no WST 3 as yet,the only WST tool by mestrini available at present is WST version 4.2.1 and you can download it from this link:-
http://forum.xda-developers.com/showthread.php?t=329170
download and run the tool ,specially the 'CID Action' button and post the report generated to verify the CID locked/unlocked status,SIM and CID unlock are entirely different.it may be SIM unlocked but you cannot CID unlock with WST,it has to be done with lokiwiz02b method.To understand the method of unlocking read and fully understand the guide posted here:-
http://forum.xda-developers.com/showthread.php?t=285435
I think you have to followed the guide correctly,after flashing button's rom 1.05,when ipl/spl 1.05 is achieved,than you have to use lokiwiz02b to cid unlock.after that it's recommended to upgrade to T-mobile 2.26 to have ipl/spl 2.26.good luck

Htc Desire C Downgrade Hboot

hello everybody...
i recently install slim-sense on my desire c , and then i wanted to return to stock rom but i can't do that because hboot of the ruu that i am flashing with is older than the one on my device so how can i resolve this problem...
some information :
bootloader unlocked with htcdev
s-On
current hboot : 1.28
ruu that i am using to return to stock is : RUU_GOLF_U_ICS_40A_HTC_Europe_1.35.401.1_Radio_10.08.98.09H_1.05.98.08M2_release_260338_signed
Solved
sayed.hosam said:
hello everybody...
i recently install slim-sense on my desire c , and then i wanted to return to stock rom but i can't do that because hboot of the ruu that i am flashing with is older than the one on my device so how can i resolve this problem...
some information :
bootloader unlocked with htcdev
s-On
current hboot : 1.28
ruu that i am using to return to stock is : RUU_GOLF_U_ICS_40A_HTC_Europe_1.35.401.1_Radio_10.08.98.09H_1.05.98.08M2_release_260338_signed
Click to expand...
Click to collapse
I think i figured it out i must flash it with the asian ruu
RUU GOLF U ICS 40A hTC Asia WWE 1.45.707.1 Radio 10.08.98.09H 1.05.98.11M3 release 262030 signed:silly:
Test
Sent from my SAMSUNG-SGH-I747
vmxice said:
Test
Sent from my SAMSUNG-SGH-I747
Click to expand...
Click to collapse
I am trying but it always keep saying error "wrong CID"!! Even with golden card !!
I am trying to change CID using fastboot but keep saying INFO[ERR] Command error !!!
Anyone have an idea ?
uff.... I finally managed to fix this out by flashing the right ruu
RUU_GOLF_U_ICS_40A_HTC_Europe_1.45.401.4_R_Radio_10.11.98.09_1.06.98.13M2_release_265825_signed
Hi sayed.hosam,
I'm trying to install the asian RUU to get the system in chinese.
But I allways get an error 131 (customer ID error).
I bought the device in Germany, that's why I suppose I have to use a goldcard, althougt it should not be locked by a provider.
After a couple of attempts, it also doesn't work with a goldcard.
Did you need a goldcard to flash the asian RUU?
If yes, did you use mmc0, mmc1 or mmc2 to get the CID?
Installing the european RUU is working for me, but doesn't containt chinese language.
cixpa said:
Hi sayed.hosam,
I'm trying to install the asian RUU to get the system in chinese.
But I allways get an error 131 (customer ID error).
I bought the device in Germany, that's why I suppose I have to use a goldcard, althougt it should not be locked by a provider.
After a couple of attempts, it also doesn't work with a goldcard.
Did you need a goldcard to flash the asian RUU?
If yes, did you use mmc0, mmc1 or mmc2 to get the CID?
Installing the european RUU is working for me, but doesn't containt chinese language.
Click to expand...
Click to collapse
No I didn't need a golden card.. I just found the right ruu and no errors happened !!
I must say that my device was unlocked from the "htcdev" site , and i relocked it before installing the ruu
Thanks for your reply!
Maybe it worked for you because you came from slim-sense, which is not locked.
Did you ever used a gold card on your desire c in the past?
Sent from my HTC Desire using xda app-developers app
sayed.hosam where did you get the RUU from? I have looked on HTCdev site and for the DESIRE C it only lists CRC files
sayed.hosam said:
uff.... I finally managed to fix this out by flashing the right ruu
RUU_GOLF_U_ICS_40A_HTC_Europe_1.45.401.4_R_Radio_10.11.98.09_1.06.98.13M2_release_265825_signed
Click to expand...
Click to collapse
hi sayed.hosam....
can you tell me the exact [TUT] for downgrade the htc desire c...
im flash the custom rom nameless rom. But i dont like the rom i back up before flashing,
when i get back to stock rom from back up...
i get an error its say MD5 mismatch.!
my only hope is to downgrade to stock RUU rom..
my baseband version is: 10.08.98.09H_1.05.98.11M3
my build number is 1.45.401.4.CL65553 release-keys
can you tell me where i get this right RUU rom..?
thanks and more power....

[Q] S-OFF with 4ext

Hi Friends!
I have a Desire S. This device is rooting and have 4ext installed. How its possible the S-OFF? I find can't method to this. My hboot version is 2.00.0002 and this phone came UK orange.
Re (Q) s-off....
joni870303 said:
Hi Friends!
I have a Desire S. This device is rooting and have 4ext installed. How its possible the S-OFF? I find can't method to this. My hboot version is 2.00.0002 and this phone came UK orange.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2143855
You might ask in that thread...
There you'll find usefull information too
Edit:
Or, you can check this if you'd like
http://forum.xda-developers.com/showthread.php?t=2136166a
As an alternative.....
You can use Revolutionary to S-OFF but you need to downgrade your HBoot to 0.98.0000 or 0.98.0002 by installing a v1.xxx RUU . Check this thread to learn how.
Remember to find a correctly branded RUU. You can find a list of RUUs here, which isn't given in the guide.
Thanks
I flashing an official O2 rom, have 155 error. Idea?
oddoneout said:
You can use Revolutionary to S-OFF but you need to downgrade your HBoot to 0.98.0000 or 0.98.0002 by installing a v1.xxx RUU . Check this thread to learn how.
Remember to find a correctly branded RUU. You can find a list of RUUs here, which isn't given in the guide.
Click to expand...
Click to collapse
joni870303 said:
Thanks
I flashing an official O2 rom, have 155 error. Idea?
Click to expand...
Click to collapse
have you already used misc_version succesfuly- just checking
Edit:
http://forum.xda-developers.com/showthread.php?t=1655832
I`ve found something- perhaps might be interesting for you
ERROR [155~159]: IMAGE ERROR
One of these error messages will appear when you use the incorrect RUU to update and the image file size is larger than the Flash ROM size. In this case, download the correct RUU version and try again.
Alternatively (in some cases) right click on the file and choose "Run as Administrator"."
(1) You dont have enought battery
(2) You dont use the right RUU that matches your CID
(3) You downloaded a corrupt file (redownload it)
(4) You dont run the file as you phone is in recovery (in fastboot mode)
(5) You didnt relock your bootloader
Click to expand...
Click to collapse
Have you created a gold card?
So that the device came. I dont have goldcard etw.. Just running an stock GB rom, and the recovery is changed 4ext the hboot is 2.00.0002. When i got the device from my friend, i unlocked this with htcdev.
oddoneout said:
Have you created a gold card?
Click to expand...
Click to collapse
Have you read the guide I linked you to earlier?
Please do so again: http://forum.xda-developers.com/showthread.php?t=1318919
oddoneout said:
Have you read the guide I linked you to earlier?
Please do so again: http://forum.xda-developers.com/showthread.php?t=1318919
Click to expand...
Click to collapse
I try this method, and bring feedback for you
Thanks
I have 155 error while flashed with the RUU. Successfully changed the version number with the misc.
Sh*t
joni870303 said:
I have 155 error while flashed with the RUU. Successfully changed the version number with the misc.
Sh*t
Click to expand...
Click to collapse
did you re lock bootloader? is the ruu matching your Cid?
Sent from my supercharged :tank:
#8 post is work. Had to relock bootloader.
Thanks, the answers.)

[Q] HTC Sensation stuck with Android Kit-Kat after brick

Hello,
I have a HTC sensation, that i started rooting and install a custom rom - Kitkat from sultanxda.
All worked perfectly, only that one day i wanted to make a sim unlock, because it was locked in Vodafone Romania.
By mistake, i am not an expert, i've used the comand: fastboot oem writesecureflag 3
After this i've got my phone bricked...
I've found Unbriking projet on xda, and with a Linux I have managed on unbriking.
The problem is that now i have S-ON, and i cannot install another ROM, it works only with the ROM that wass installed before bricking.
I cannot get S-off, i have tried Juopunutbear method, but its not working, says to connect the device, and install drivers...
I have tried a lot of method's, i've tried installing a stock RUU, without luck...
I guess that i have to modify my firmware or hboot version, but as I was saying, i am no expert.
I can provide more information, if anyone can help me.
thanks
florinbv23 said:
Hello,
I have a HTC sensation, that i started rooting and install a custom rom - Kitkat from sultanxda.
All worked perfectly, only that one day i wanted to make a sim unlock, because it was locked in Vodafone Romania.
By mistake, i am not an expert, i've used the comand: fastboot oem writesecureflag 3
After this i've got my phone bricked...
I've found Unbriking projet on xda, and with a Linux I have managed on unbriking.
The problem is that now i have S-ON, and i cannot install another ROM, it works only with the ROM that wass installed before bricking.
I cannot get S-off, i have tried Juopunutbear method, but its not working, says to connect the device, and install drivers...
I have tried a lot of method's, i've tried installing a stock RUU, without luck...
I guess that i have to modify my firmware or hboot version, but as I was saying, i am no expert.
I can provide more information, if anyone can help me.
thanks
Click to expand...
Click to collapse
post now your bootloader details
rzr86 said:
post now your bootloader details
Click to expand...
Click to collapse
I made a print screen to be sure that i dont give u false information, hope its OK.
florinbv23 said:
I made a print screen to be sure that i dont give u false information, hope its OK.
Click to expand...
Click to collapse
does your bootloader says unlock/locked?
use these ruu.exe and see how it goes
http://fileom.com/gjssrzfjd7c6/RUU_....24A.3504.31_M_release_280871_signed.exe.html
http://fileom.com/m9b0o83qmnpv/RUU_....24A.3504.31_M_release_266171_signed.exe.html
it says unlocked, i am online now, and trying to find answers
thanks for the help, i will donwnload the ruu u provided me to see if i have luck
florinbv23 said:
it says unlocked, i am online now, and trying to find answers
thanks for the help, i will donwnload the ruu u provided me to see if i have luck
Click to expand...
Click to collapse
since it is unlocked you can still flash kitkat rom
just follow step 2 from this guide(flashing a recovery)
http://forum.xda-developers.com/showthread.php?t=1631861
then from 4ext format all partitions except sdcard
enable smartflash(because now you are on S-ON)
flash the rom
but if you still want to use the ruu.exe you must have to relock your bootloader first
then from 4ext format all partitions except sdcard
enable smartflash(because now you are on S-ON)
flash the rom
but if you still want to use the ruu.exe you must have to relock your bootloader first[/QUOTE]
i've relocked the bootloader, and now i try tu use the ruu.exe, hope it works...
florinbv23 said:
then from 4ext format all partitions except sdcard
enable smartflash(because now you are on S-ON)
flash the rom
but if you still want to use the ruu.exe you must have to relock your bootloader first
Click to expand...
Click to collapse
i've relocked the bootloader, and now i try tu use the ruu.exe, hope it works...[/QUOTE]
post results
rzr86 said:
i've relocked the bootloader, and now i try tu use the ruu.exe, hope it works...
Click to expand...
Click to collapse
post results[/QUOTE]
this error occured when the ruu,exe was updating signature, put an attachement...
could be because i have 3.24.401.1 firmware???
florinbv23 said:
could be because i have 3.24.401.1 firmware???
Click to expand...
Click to collapse
nope i gave you a ruu with higher firmware but the same region as yours
i don't know what is wrong
did you try both of them ?
edit: unlock the bootloader again and try flashing a rom from recovery
rzr86 said:
nope i gave you a ruu with higher firmware but the same region as yours
i don't know what is wrong
did you try both of them ?
edit: unlock the bootloader again and try flashing a rom from recovery
Click to expand...
Click to collapse
the second one didnt got... invalid link...
florinbv23 said:
the second one didnt got... invalid link...
Click to expand...
Click to collapse
are you syre?
i can download it fine
florinbv23 said:
the second one didnt got... invalid link...
Click to expand...
Click to collapse
i think i made a mistake first time, i used a ruu.exe with same firmware 3.24, it was an older one i had in downloads
now i try with the first one u gave me... hope it works
finally, i managed installing the ruu.exe u gave me, i hope that now i can get s-off... and make simunlock..
i will use this thread http://forum.xda-developers.com/showthread.php?t=1870233
thx you for helping me
i made a big mistake, as i was trying with the ruu.exe with the same firmware as i had, that is why i got that signature error.
the ruu.exe u gave me, made the upgrade and it works now )
i am so happy... i've tryed for 2 weeks on solving the problem.
florinbv23 said:
i think i made a mistake first time, i used a ruu.exe with same firmware 3.24, it was an older one i had in downloads
now i try with the first one u gave me... hope it works
Click to expand...
Click to collapse
that makes sense about signature error
florinbv23 said:
finally, i managed installing the ruu.exe u gave me, i hope that now i can get s-off... and make simunlock..
i will use this thread http://forum.xda-developers.com/showthread.php?t=1870233
Click to expand...
Click to collapse
why don't you try with this S-OFF guide?
http://forum.xda-developers.com/showthread.php?t=1661631
there is no need to unlock the bootloader again
rzr86 said:
why don't you try with this S-OFF guide?
http://forum.xda-developers.com/showthread.php?t=1661631
there is no need to unlock the bootloader again
Click to expand...
Click to collapse
I will try it tomorow
thx again

Categories

Resources