Database Info

JAFWM-May not be the answer to flashing difficult prophets

Bought JAFWM yesterday and here is what I have found:
-Tried flashing New Jamin Rom
Result-Stuck in perpetual reset mode most of the time
When I did manage to get out of the automatic reset loop here is what I found:
1. Radio rom was not installed (=no phone, wifi, bluetooth functionality
2. device had incredibly poor response to any commands (severe lag issues)
3. Basic functionality (even without phone) was very bad
-Tried flashing Qtek Rom
Result-similar as imate (listed above)
1. No radio rom
2. device had better response than imate rom but still poor
Flashed back to shipped dopod 818 pro rom
-Thank God my device returned to normal (radio rom was installed this time)
Conclusion:
I don't think JAFWM can unlock CID (based on my exerience)
If their are any JAFWM experts out there please let me know if there is a way to get the radio rom installed with the new ROMS (ie. QTEK,IMATE)
If JAFWM can't unlock the CID than there is no advantage to using this device other than it's user friendly interface (which is quite easy for unexperienced rom flashers)
Still waiting for Dopod's new rom (that seems to be my only answer for AKU2)

I tried flash my Dopod 818 pro to any rom such as Jamin or Qtek S200 by JAFWM and all run well.
You should know when to keep the bootloader and when to skip it.
If you want to play ROM JAMIN in your Dopod 818 pro, do like I did:
1. Use JAFWM downgrade bootloader to 1.0 by flashing Dopod818pro_WWE_1001321_10013102_11320_Ship without skip bootloader.
2. Unlock CID by aWizard. JAFWM will have function unlock soon be sure.
3. If you want to play ROM JAMIN with OS 2.0 do: use JAFWM flash RUU_Prophet_2100728_21007109_020720_QtekDAN_Ship without skip bootloader. Then flash JAMin_WWE_2130923_21309112_020720_ship. Cos as I know, only Qtek Rom can upgrade both IPL and SPL. And Dopod Rom can downgrade both. JAMin can not.
And if you just need to upgrade your radio only, you have to dump it to nba file, then use aWizard burn it to you phone. Cos the package of Prophet ROM always exits with 1 file nk.nbf.
If you use JAFWM mobility with other software, it'll greatly help.
That's my experience, hope your PDA work well
BR

Re: JAFWM-May not be the answer to flashing difficult prophe
rcnomad said:
Bought JAFWM yesterday and here is what I have found:
-Tried flashing New Jamin Rom
Result-Stuck in perpetual reset mode most of the time
When I did manage to get out of the automatic reset loop here is what I found:
1. Radio rom was not installed (=no phone, wifi, bluetooth functionality
2. device had incredibly poor response to any commands (severe lag issues)
3. Basic functionality (even without phone) was very bad
-Tried flashing Qtek Rom
Result-similar as imate (listed above)
1. No radio rom
2. device had better response than imate rom but still poor
Flashed back to shipped dopod 818 pro rom
-Thank God my device returned to normal (radio rom was installed this time)
Conclusion:
I don't think JAFWM can unlock CID (based on my exerience)
If their are any JAFWM experts out there please let me know if there is a way to get the radio rom installed with the new ROMS (ie. QTEK,IMATE)
If JAFWM can't unlock the CID than there is no advantage to using this device other than it's user friendly interface (which is quite easy for unexperienced rom flashers)
Still waiting for Dopod's new rom (that seems to be my only answer for AKU2)
Click to expand...
Click to collapse
Thanks for the feedback, in case JAFWM have some bug, your post will help me to debug it. It would help me also if you could post here your JAFWMLOG.txt , you can find it in same dir JAFWM.exe is located.
But I will check it also myself and will post result here, but sofar i know there are not any problems known until now. However, i have no NEO i will buy one at monday and play little bit. Maybe os not match bootloader or whatever, but let see after i have my NEO.

JAFWM-CAN FLASH DIFFICULT PROPHETS>>>IT REALLY WORK
Thanks TA_mobile
I did as you recommended and it worked!
JAFWM does what it is supposed to do...

Re: JAFWM-CAN FLASH DIFFICULT PROPHETS>>>IT REALLY
Today played little bit with my Qtek s200. I flashed it with with follow roms:
JAMin_WWE_ 2130923_21309112_020720_ship
RUU_Prophet_1001321_10013102_11320_DopodAsia_Ship
I did not unlock any CID before and all functions was normal. I did it with skipped and witout skipped bootloader flash. If any one have any problem with a secific rom, plz tell me and i will test it.
All this tests we has done with the new version (1.3beta) released today. You can download from http://forums.phone-tools.cn/showthread.php?t=9411 and try it.

ta_mobile said:
I tried flash my Dopod 818 pro to any rom such as Jamin or Qtek S200 by JAFWM and all run well.
You should know when to keep the bootloader and when to skip it.
If you want to play ROM JAMIN in your Dopod 818 pro, do like I did:
1. Use JAFWM downgrade bootloader to 1.0 by flashing Dopod818pro_WWE_1001321_10013102_11320_Ship without skip bootloader.
2. Unlock CID by aWizard. JAFWM will have function unlock soon be sure.
3. If you want to play ROM JAMIN with OS 2.0 do: use JAFWM flash RUU_Prophet_2100728_21007109_020720_QtekDAN_Ship without skip bootloader. Then flash JAMin_WWE_2130923_21309112_020720_ship. Cos as I know, only Qtek Rom can upgrade both IPL and SPL. And Dopod Rom can downgrade both. JAMin can not.
And if you just need to upgrade your radio only, you have to dump it to nba file, then use aWizard burn it to you phone. Cos the package of Prophet ROM always exits with 1 file nk.nbf.
If you use JAFWM mobility with other software, it'll greatly help.
That's my experience, hope your PDA work well
BR
Click to expand...
Click to collapse
Hello ta_mobile,
After flashing Dopod ROM into my Xda Neo using JAF without skip IPL/SPL, I got IPL=1.0 and SPL=2.09 and the device stucked at the bootloader mode with 3 colors and could not load the OS. I then flashed Neo with Qtek ROM 2.09 skiping IPL/SPL. My Neo works fine but now I have IPL 1.0 and SPL 2.09, I could not unlock CID using aWizard. Is there any way to get SPL 1.0 and do CID unlock????
Thanks

Tamagochi said:
ta_mobile said:
I tried flash my Dopod 818 pro to any rom such as Jamin or Qtek S200 by JAFWM and all run well.
You should know when to keep the bootloader and when to skip it.
If you want to play ROM JAMIN in your Dopod 818 pro, do like I did:
1. Use JAFWM downgrade bootloader to 1.0 by flashing Dopod818pro_WWE_1001321_10013102_11320_Ship without skip bootloader.
2. Unlock CID by aWizard. JAFWM will have function unlock soon be sure.
3. If you want to play ROM JAMIN with OS 2.0 do: use JAFWM flash RUU_Prophet_2100728_21007109_020720_QtekDAN_Ship without skip bootloader. Then flash JAMin_WWE_2130923_21309112_020720_ship. Cos as I know, only Qtek Rom can upgrade both IPL and SPL. And Dopod Rom can downgrade both. JAMin can not.
And if you just need to upgrade your radio only, you have to dump it to nba file, then use aWizard burn it to you phone. Cos the package of Prophet ROM always exits with 1 file nk.nbf.
If you use JAFWM mobility with other software, it'll greatly help.
That's my experience, hope your PDA work well
BR
Click to expand...
Click to collapse
Hello ta_mobile,
After flashing Dopod ROM into my Xda Neo using JAF without skip IPL/SPL, I got IPL=1.0 and SPL=2.09 and the device stucked at the bootloader mode with 3 colors and could not load the OS. I then flashed Neo with Qtek ROM 2.09 skiping IPL/SPL. My Neo works fine but now I have IPL 1.0 and SPL 2.09, I could not unlock CID using aWizard. Is there any way to get SPL 1.0 and do CID unlock????
Thanks
Click to expand...
Click to collapse
But what is the reason you want upgrade or downgrade your bootloader? I can not get it :?

Tamagochi said:
...I could not unlock CID using aWizard. Is there any way to get SPL 1.0 and do CID unlock????...
Click to expand...
Click to collapse
Hello,
i have an German O2 Neo and sometimes Problems with CID unlocking for Flashing. Start aWizard an use the option "e". Then show on youre XDA and start the enablerapi.cab on youre XDA. At next use aWizard with the option unlockCID and test flashing!
With this Method i can backup my Neo with aWizard and flash the new Jamin ROM, the Qtek ROM not. Rebackup to German ROM also OK but only the OS, the BootScreen (SplashScreen) not.
Sry for my miserable english!

Qtek s200 update problems----important experience

HI all
i have a qtek_S200(HTC Prophet) which is :
IPL 2.09.0001
SPL 2.15.0001
OS 2.15.13.24
GSM 02.17.21
now,i have experienced a big problem like this:
i wanted to change the ROM of my phone to English..then i download a shiped Rom to flash it...
the shiped Rom i used was RUU_Prophet_1001321_100013102_11320_DopodAsia_shiped.exe....
But everytime i tried to Flash, the program said "ERROR(300):invalid update tool..this update utility cannot be used for your PDA phone.please get newer update utillity" when the phone proceeded to a reseting and turned to three colour mode....
So, that is way? someone plz help me..
ThX
jimmy

2nd problem
the qtek S200 is CHT now, coz it ought to be ENG originallly, so it must be CID unlocked sometime ago...
unfortunlly, when i try to backup its Rom to SD card using MTTY by the code" r2sd all", like backing up a wizard' rom....but it said "you don't get the proper security level to download a specific image"..
Then i use the MachinaGod' lokiwizi and RapiUnlocker trying to unlock the CID, but it displays error and seems fail ..
so, guys plz help me ..
THX
jimmy

UP
Guys please help me

another: HOw to dump a ROM of Qtek s200(prophet)?
Hi,guys..
HOw to dump a ROM of Qtek s200(prophet)?
i tried to dump it's Rom using a MTTY, the code i input was " r2sd all", but it said that
Code:
r2sd all
*****user area size=0x77E0000 Bytes
R2SDBackup0-Download type=5
usTotalBlock=1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
You didn't get the proper security level to download a specific image
So it is fail......
i want to backup it's Rom, then flash it onto other Prophet ...
Anyone pLz teach me how to do...
THX
jimmy

try to awizard 1.2 tool (It's on FTP in wizard folder or upload folder).

thefamous said:
try to awizard 1.2 tool (It's on FTP in wizard folder or upload folder).
Click to expand...
Click to collapse
i have tried but it is no use..

Jimmy:
You will need to downgrade the device to 1.x os.
See my comment here:
http://forum.xda-developers.com/viewtopic.php?p=283140#283140
I will add this to the wiki shortly.
I managed to successfully use the r2sd command after unlocking.
Let me know if you need anymore information.
Thanks
Pete

Rymez2K said:
Jimmy:
You will need to downgrade the device to 1.x os.
See my comment here:
http://forum.xda-developers.com/viewtopic.php?p=283140#283140
I will add this to the wiki shortly.
I managed to successfully use the r2sd command after unlocking.
Let me know if you need anymore information.
Thanks
Pete
Click to expand...
Click to collapse
hi ..thx for your help.
but..how to downgrade to JAMin_WWE_1000925_10009114_11420_ship.exe ? and what a hacked version of the rom update utility i can use? i mean expect JMFWM(the one need money.i don't like it).
can you please show me the detail steps...thank you very much.!
jimmy

jimmy80,
Have you try as discussed in this thread: http://forum.xda-developers.com/viewtopic.php?t=49298

Jamin WWE No Vendor ID

Hi there,
Since I installed the latest dopod 818 Pro WWE ROM on my Qtek S200, I have some trouble with the device now and then. It unexpectedly reboots while having conversations after which it can't find my service provider. Then when I disable and re-enable the phone in communications manager it finds the network again. Sometimes calls are not coming through either. I did not have any of these problems with the old Qtek S200 NL ROM.
I also tried different radio roms. 2.19.21, 2.20.21, 2.30.21, no luck.
I like to try the Jamin ROM. Is there anyone who know where I can find a NoVendorID version of the latest Jamin WWE ROM? I tried the regular one in combination with the ROMupdateUtility.exe of the Dopod NoVendorID ROM, but this gives an error at 80% while flashing. After that I was only able to enter the bootloader mode of my S200. So I flashed it once again with the Dopod 818 Pro ROM.
Thanks!
Kind regards,
Dennis

Yeh, I would like to have the No Vendor ID JAMin WWE Rom, too. Could some one please make that? I still do not like the dopod ROM for some reasons. JAMin ROM is still my best choice.

I didn't see the rom you mentioned, but if you CID unlosck your device first, you can go to: ftp://ftp.clubimate.com/ and choose the rom you like, I mean, the language you wish. Go for it and luck!
The tools for CID unlock your device is, on XDA-Wiki, just up!

cidriver said:
I didn't see the rom you mentioned, but if you CID unlosck your device first, you can go to: ftp://ftp.clubimate.com/ and choose the rom you like, I mean, the language you wish. Go for it and luck!
The tools for CID unlock your device is, on XDA-Wiki, just up!
Click to expand...
Click to collapse
I have a G4 prophet. Again, it is impossible to CID unlock a G4 prophet!!!!!!!!!!!!!!!!!!
Why people keep telling me to CID unlock my device? Of course we all know CID unlock first. If we could CID unlock our device, why should we ask for No Vendor ID upgrade?

no-vendor ID
Yes, I'm still looking for a No-Vendor ID Jamin ROM WWE, that would work on my S200... Anyone?
Thanks

Reverting AKU 2.3 ¿Upgrade? Spanish ROM RQ

After instaling the ROM in the link:
Prophet AKU2.3 pdamobiz customized rom [G4 with SPL 2.15.0001]
I don't mind this being WWE instead than Spanish, but I got several problems:
Hang during install after first reboot. (after every Hard Reset)
Not all programs installed.
Not all installed programs running.
Some other minor glitches.
I moved from 2.15 ESP Rom (Vodafone) wich I was unable to extract.
Does anyone knows were to find my "old" rom?
I downloaded 2.13 from imateclub but refuses to install: "this nbf file is not for your device, get a newer one".
Help! please.

First, is your CID unlock?
Second, your device have a G4 chip, so you can not be able to install an older version, I mean, If you have a 2.15.0001 you can not be able to install a Rom for a Sapnish Qtek 2.09.0000 or like JAMin by i-mate 2.13.0000.
About where you can find your original rom, I invite you to find it on XDA-Wiki, after you log in under your nick or make a Dump Rom from other device like yours.

cidriver said:
First, is your CID unlock?
Second, your device have a G4 chip, so you can not be able to install an older version, I mean, If you have a 2.15.0001 you can not be able to install a Rom for a Sapnish Qtek 2.09.0000 or like JAMin by i-mate 2.13.0000.
About where you can find your original rom, I invite you to find it on XDA-Wiki, after you log in under your nick or make a Dump Rom from other device like yours.
Click to expand...
Click to collapse
Thanks for your answer!
I'm unsure if this is CID unlocked, it is SIM unlocked now, will check for the CID issue. Though I assume that being able to install other 2.15 rom (dopòd) means it is already CID unlocked too....¿?
I was afraid the "downgrading" has to be done in the same version range. (2.15)
Thanks again for the wiki proposal, will go there.

The wiki site is a real mess actually, with no trace of usefull info specific for the prophet. (Sorry to say) Just a couple of ROM's some not working.
No one with a 2.15 ESN rom to share?
Regards.

Vox Italian official ROM needed - Vox Bricked.

Hi All,
I need an Italian Official VOX ROM or instruction how-to flash unsigned ROM.
Please note that I have flashed a wrong ROM and Activesync does not work, I can access only though bootloader.
Can anyone help me?
Thanks

Here is something you could try : http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
Try naming the VOXIMG.nbh instead of HERMIMG.nbh.
but I really don't know if this can work. most likely not in fact since I haven't seen it described for the vox on these forums..
Sorry I have really no experience in bricked devices. Well I bricked mine several times but usb connection still worked through bootloader, so I could start ruu updater when in bootloader mode and it worked fine.

I have bricked my Vox making custom roms, but have found that even though i can get into the bootloader and run up the RUU updater, every time i go to flash a rom i get errors saying wrong VendorID etc... this is because the rom i flashed had different ID's to the original HTC ROMS. Maybe you are signing them different to me?
Please help!

Hi Doctor,
it does not work with VOX.

iceberg2403 said:
I have bricked my Vox making custom roms, but have found that even though i can get into the bootloader and run up the RUU updater ...
Please help!
Click to expand...
Click to collapse
i`ve made the same mistake (flashed a ROM cooked by me) ... but prior to flash my phone i was lucky enough to use USPL 1.16 to permanently flash my SPL to 1.16 (i`ve used both archives Vox USPL-CID BYPASS.zip and Vox-USPL-RUU.zip) instead of 1.27 (original, vendor locked).
On the XDA ftp is a italian ROM if i`m not mistaking, did you try it ?
try this ... i`m not sure it will work.
Make sure you have disabled the USB connection in ActiveSync:
File --> Connection settings --> uncheck "allow USB connections"
1. get into booloader mode
2. connect with mtty
3. write password BsaD5SeoA
4. try to run the USPL 1.16 now ... (i`m just guessing)
if it doens`t work reset the phone and repeat step 1. and 2. and continue with:
3. write password BsaD5SeoA after that ruurun 0
4. try to run the USPL 1.16 now ... (i`m just guessing)
alternatively instead of USPL you can try to run the italian rom from the ftp.
i`ve managed to save my phone doing steps 1, 2, and 3 (not sure which one worked) from above and then flashed with ARA ROM ... but keep in mind my SPL was 1.16.
hope this helps

I'm italian could I help you...
Hi i'm italian and i'm totally nwe on those things...eheheh i haven't yet underrstand what those cooked roms are..but I have an italian s710 with the original rom...with some software on it..If i could help.... let me know..maybe send me a PM or a mail through the forum mail system..
ciao ciao fammi sapere
bye bye just let'me know

with TheBo`s help the problem is almost solved :d

My intention was just to ask if a backup of my original HTC VOX (unbranded) could help...sorry...next time I will not do the same mistake.

SPL
Hi,
unfortunately this does not help because my VOX is CID locked “g_cKeyCardSecurityLevel = FF” and Activesync does not work, for this reason I’m not able to flash any unsigned rom.
My SPL is 1.27.
I have tried to flash 1.16 but the procedure does not work.
It is a way to CID unlock my VOX from bootloader?
Can anyone cook a signed Italian ROM?
Thanks.

maybe TheBo`s ROM will work for you

Nop,
it does not help until my VOX is unlocked...

alllof said:
Nop,
it does not help until my VOX is unlocked...
Click to expand...
Click to collapse
if the Vendor ID is the same it will work
my Y! ID is maxtry80, TheBo and alllof contact me there, maybe i can help you

If you would to help us you can try to cook a signed rom from the dump in ftp://xda:[email protected]/Vox/ (file name: s710 rom 1.15.408.2 (italian + uk eng + us eng).rar) or give to us instructions how to do it.
Thanks for your help.
Regards.

i`ll try to help you ... i`ll be back in couple of hours with results

Thanks for your help!

check you pm!

did it work?

i tried the method posted a while back with no positive results .... yet
I was just wondering, i looked at the bootloader and it says Vox SPL 1.15 so this is the version i am using and it doesnt let me flash another vendor id rom...

VOX Briched.
Nop,
it does not work. I have sent my device to HTC...

Can you tell me how it works out?? I am hesitant to send mine to HTC (i had to import this phone) which will mean i have to pay heaps for shipping... and even then i dont expect them to replace it because the last rom i flashed had a different splash screen (silly me ) this will be obvious to them and therefore wont replace mine because i tampered with the rom.